X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=doc%2Fguides%2Frel_notes%2Fdeprecation.rst;h=d2dd302db630cbb8add60f4512bfbd138413d184;hb=d8cda718e13ce3b238489217832dc5ed28557206;hp=e4ca250941fe26f488293126c09d930dc9ae5a17;hpb=f2f020d21049cb6439c35276b767d1c42e047618;p=dpdk.git diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index e4ca250941..d2dd302db6 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -8,37 +8,58 @@ API and ABI deprecation notices are to be posted here. Deprecation Notices ------------------- -* eal: several API and ABI changes are planned for ``rte_devargs`` in v17.11. - The format of device command line parameters will change. The bus will need - to be explicitly stated in the device declaration. The enum ``rte_devtype`` - was used to identify a bus and will disappear. - The structure ``rte_devargs`` will change. - The ``rte_devargs_list`` will be made private. - The following functions are deprecated starting from 17.08 and will either be - modified or removed in 17.11: - - - ``rte_eal_devargs_add`` - - ``rte_eal_devargs_type_count`` - - ``rte_eal_parse_devargs_str``, replaced by ``rte_eal_devargs_parse`` - -* eal: An ABI change is planned for 17.11 to make DPDK aware of IOVA address - translation scheme. - Reference to phys address in EAL data-structure or functions may change to - IOVA address or more appropriate name. - The change will be only for the name. - Functional aspects of the API or data-structure will remain same. - -* The mbuf flags PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated and - are respectively replaced by PKT_RX_VLAN_STRIPPED and - PKT_RX_QINQ_STRIPPED, that are better described. The old flags and - their behavior will be kept until 17.08 and will be removed in 17.11. - -* ethdev: Tx offloads will no longer be enabled by default in 17.11. - Instead, the ``rte_eth_txmode`` structure will be extended with - bit field to enable each Tx offload. - Besides of making the Rx/Tx configuration API more consistent for the - application, PMDs will be able to provide a better out of the box performance. - As part of the work, ``ETH_TXQ_FLAGS_NO*`` will be superseded as well. +* eal: DPDK runtime configuration file (located at + ``/var/run/._config``) will be moved. The new path will be as follows: + + - if DPDK is running as root, path will be set to + ``/var/run/dpdk//config`` + - if DPDK is not running as root and $XDG_RUNTIME_DIR is set, path will be set + to ``$XDG_RUNTIME_DIR/dpdk//config`` + - if DPDK is not running as root and $XDG_RUNTIME_DIR is not set, path will be + set to ``/tmp/dpdk//config`` + +* eal: both declaring and identifying devices will be streamlined in v18.05. + New functions will appear to query a specific port from buses, classes of + device and device drivers. Device declaration will be made coherent with the + new scheme of device identification. + As such, ``rte_devargs`` device representation will change. + + - removal of ``name`` and ``args`` fields. + - The enum ``rte_devtype`` was used to identify a bus and will disappear. + - Functions previously deprecated will change or disappear: + + + ``rte_eal_devargs_type_count`` + + ``rte_eal_devargs_parse`` will change its format and use. + +* pci: Several exposed functions are misnamed. + The following functions are deprecated starting from v17.11 and are replaced: + + - ``eal_parse_pci_BDF`` replaced by ``rte_pci_addr_parse`` + - ``eal_parse_pci_DomBDF`` replaced by ``rte_pci_addr_parse`` + - ``rte_eal_compare_pci_addr`` replaced by ``rte_pci_addr_cmp`` + +* eal: a new set of mbuf mempool ops name APIs for user, platform and best + mempool names have been defined in ``rte_mbuf`` in v18.02. The uses of + ``rte_eal_mbuf_default_mempool_ops`` shall be replaced by + ``rte_mbuf_best_mempool_ops``. + The following function is deprecated since 18.05, and will be removed + in 18.08: + + - ``rte_eal_mbuf_default_mempool_ops`` + +* mbuf: The opaque ``mbuf->hash.sched`` field will be updated to support generic + definition in line with the ethdev TM and MTR APIs. Currently, this field + is defined in librte_sched in a non-generic way. The new generic format + will contain: queue ID, traffic class, color. Field size will not change. + +* ethdev: a new Tx and Rx offload API was introduced on 17.11. + In the new API, offloads are divided into per-port and per-queue offloads. + Offloads are disabled by default and enabled per application request. + + In later releases the old offloading API will be deprecated, which will include: + - removal of ``ETH_TXQ_FLAGS_NO*`` flags. + - removal of ``txq_flags`` field from ``rte_eth_txconf`` struct. + - removal of the offloads bit-field from ``rte_eth_rxmode`` struct. * ethdev: the legacy filter API, including ``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well @@ -48,28 +69,34 @@ Deprecation Notices Target release for removal of the legacy API will be defined once most PMDs have switched to rte_flow. -* ethdev: The device flag advertizing hotplug capability - ``RTE_ETH_DEV_DETACHABLE`` is not needed anymore and will be removed in - v17.11. - This capability is verified upon calling the relevant hotplug functions in EAL - by checking that the ``unplug`` ops is set in the bus. This verification is - done by the EAL and not by the ``ethdev`` layer anymore. Users relying on this - flag being present only have to remove their checks to follow the change. - -* ethdev: new parameters - ``rte_security_capabilities`` and - ``rte_security_ops`` will be added to ``rte_eth_dev_info`` and - ``rte_eth_dev`` respectively to support security operations like - ipsec inline. - -* cryptodev: new parameters - ``rte_security_capabilities`` and - ``rte_security_ops`` will be added to ``rte_cryptodev_info`` and - ``rte_cryptodev`` respectively to support security protocol offloaded - operations. +* pdump: As we changed to use generic IPC, some changes in APIs and structure + are expected in subsequent release. -* cryptodev: the following function is deprecated starting from 17.08 and will - be removed in 17.11: + - ``rte_pdump_set_socket_dir`` will be removed; + - The parameter, ``path``, of ``rte_pdump_init`` will be removed; + - The enum ``rte_pdump_socktype`` will be removed. - - ``rte_cryptodev_create_vdev`` +* cryptodev: The following changes will be made in the library + for 18.08: -* librte_meter: The API will change to accommodate configuration profiles. - Most of the API functions will have an additional opaque parameter. + - Removal of ``sym`` structure in ``rte_cryptodev_info`` structure, + containing fields not relevant anymore since the session mempool + is not internal in the crypto device anymore. + - Replacement of ``pci_dev`` field with the more generic ``rte_device`` + structure. + - Functions ``rte_cryptodev_queue_pair_attach_sym_session()`` and + ``rte_cryptodev_queue_pair_dettach_sym_session()`` will be deprecated from + 18.05 and removed in 18.08, as there are no drivers doing anything useful + with them. + - Functions ``rte_cryptodev_queue_pair_start()`` and + ``rte_cryptodev_queue_pair_stop()`` will be deprecated from 18.05 + and removed in 18.08, as there are no drivers doing anything useful + with them. + - Some feature flags such as ``RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER`` are ambiguous, + so some will be replaced by more explicit flags. + - Function ``rte_cryptodev_get_header_session_size()`` will be deprecated + in 18.05, and it gets replaced with ``rte_cryptodev_sym_get_header_session_size()``. + It will be removed in 18.08. + - Function ``rte_cryptodev_get_private_session_size()`` will be deprecated + in 18.05, and it gets replaced with ``rte_cryptodev_sym_get_private_session_size()``. + It will be removed in 18.08.