X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=doc%2Fguides%2Frel_notes%2Fdeprecation.rst;h=ea4cfa7a481a965dcd487320e8897d9f1215579b;hb=34312be7a935ac9dd9ae096f392fc9a570cbb009;hp=7e2dcb769284bc7dca1c3f738b48ae797b6945a9;hpb=3e48944f17dd3a78baf0b01c8fbd51486624ff17;p=dpdk.git diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index 7e2dcb7692..ea4cfa7a48 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -4,9 +4,9 @@ ABI and API Deprecation ======================= -See the :doc:`guidelines document for details of the ABI policy `. -API and ABI deprecation notices are to be posted here. - +See the guidelines document for details of the :doc:`ABI policy +<../contributing/abi_policy>`. API and ABI deprecation notices are to be posted +here. Deprecation Notices ------------------- @@ -23,36 +23,58 @@ Deprecation Notices * eal: The function ``rte_eal_remote_launch`` will return new error codes after read or write error on the pipe, instead of calling ``rte_panic``. -* eal: the ``rte_mem_config`` struct will be made private to remove it from the - externally visible ABI and allow it to be updated in the future. - -* eal: both declaring and identifying devices will be streamlined in v18.11. - New functions will appear to query a specific port from buses, classes of - device and device drivers. Device declaration will be made coherent with the - new scheme of device identification. - As such, ``rte_devargs`` device representation will change. - - - The enum ``rte_devtype`` was used to identify a bus and will disappear. - - Functions previously deprecated will change or disappear: - - + ``rte_eal_devargs_type_count`` - -* vfio: removal of ``rte_vfio_dma_map`` and ``rte_vfio_dma_unmap`` APIs which - have been replaced with ``rte_dev_dma_map`` and ``rte_dev_dma_unmap`` - functions. The due date for the removal targets DPDK 20.02. - -* pci: Several exposed functions are misnamed. - The following functions are deprecated starting from v17.11 and are replaced: - - - ``eal_parse_pci_BDF`` replaced by ``rte_pci_addr_parse`` - - ``eal_parse_pci_DomBDF`` replaced by ``rte_pci_addr_parse`` - - ``rte_eal_compare_pci_addr`` replaced by ``rte_pci_addr_cmp`` - -* dpaa2: removal of ``rte_dpaa2_memsegs`` structure which has been replaced - by a pa-va search library. This structure was earlier being used for holding - memory segments used by dpaa2 driver for faster pa->va translation. This - structure would be made internal (or removed if all dependencies are cleared) - in future releases. +* eal: The ``rte_logs`` struct and global symbol will be made private to + remove it from the externally visible ABI and allow it to be updated in the + future. + +* rte_atomicNN_xxx: These APIs do not take memory order parameter. This does + not allow for writing optimized code for all the CPU architectures supported + in DPDK. DPDK will adopt C11 atomic operations semantics and provide wrappers + using C11 atomic built-ins. These wrappers must be used for patches that + need to be merged in 20.08 onwards. This change will not introduce any + performance degradation. + +* rte_smp_*mb: These APIs provide full barrier functionality. However, many + use cases do not require full barriers. To support such use cases, DPDK will + adopt C11 barrier semantics and provide wrappers using C11 atomic built-ins. + These wrappers must be used for patches that need to be merged in 20.08 + onwards. This change will not introduce any performance degradation. + +* rte_cio_*mb: Since the IO barriers for ARMv8 platforms are relaxed from DSB + to DMB, rte_cio_*mb APIs provide the same functionality as rte_io_*mb + APIs (taking all platforms into consideration). rte_io_*mb APIs should be + used in the place of rte_cio_*mb APIs. The rte_cio_*mb APIs will be + deprecated in 20.11 release. + +* igb_uio: In the view of reducing the kernel dependency from the main tree, + as a first step, the Technical Board decided to move ``igb_uio`` + kernel module to the dpdk-kmods repository in the /linux/igb_uio/ directory + in 20.11. + Minutes of Technical Board Meeting of `2019-11-06 + `_. + +* lib: will fix extending some enum/define breaking the ABI. There are multiple + samples in DPDK that enum/define terminated with a ``.*MAX.*`` value which is + used by iterators, and arrays holding these values are sized with this + ``.*MAX.*`` value. So extending this enum/define increases the ``.*MAX.*`` + value which increases the size of the array and depending on how/where the + array is used this may break the ABI. + ``RTE_ETH_FLOW_MAX`` is one sample of the mentioned case, adding a new flow + type will break the ABI because of ``flex_mask[RTE_ETH_FLOW_MAX]`` array + usage in following public struct hierarchy: + ``rte_eth_fdir_flex_conf -> rte_fdir_conf -> rte_eth_conf (in the middle)``. + Need to identify this kind of usages and fix in 20.11, otherwise this blocks + us extending existing enum/define. + One solution can be using a fixed size array instead of ``.*MAX.*`` value. + +* ethdev: Split the ``struct eth_dev_ops`` struct to hide it as much as possible + will be done in 20.11. + Currently the ``struct eth_dev_ops`` struct is accessible by the application + because some inline functions, like ``rte_eth_tx_descriptor_status()``, + access the struct directly. + The struct will be separate in two, the ops used by inline functions will be + moved next to Rx/Tx burst functions, rest of the ``struct eth_dev_ops`` struct + will be moved to header file for drivers to hide it from applications. * ethdev: the legacy filter API, including ``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well @@ -62,32 +84,41 @@ Deprecation Notices Target release for removal of the legacy API will be defined once most PMDs have switched to rte_flow. -* kni: remove KNI ethtool support. To clarify, this is not to remove the KNI, - but only to remove ethtool support of it that is disabled by default and - can be enabled via ``CONFIG_RTE_KNI_KMOD_ETHTOOL`` config option. - Existing KNI ethtool implementation is only supported by ``igb`` & ``ixgbe`` - drivers, by using a copy of kernel drivers in DPDK. This model cannot be - extended to all drivers in DPDK and it is too much effort to maintain - kernel modules in DPDK. As a result users won't be able to use ``ethtool`` - via ``igb`` & ``ixgbe`` anymore. - -* cryptodev: New member in ``rte_cryptodev_config`` to allow applications to - disable features supported by the crypto device. Only the following features - would be allowed to be disabled this way, - - - ``RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO`` - - ``RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO`` - - ``RTE_CRYPTODEV_FF_SECURITY`` - - Disabling unused features would facilitate efficient usage of HW/SW offload. - - - Member ``uint64_t ff_disable`` in ``rte_cryptodev_config`` - - The field would be added in v19.08. - -* cryptodev: the ``uint8_t *data`` member of ``key`` structure in the xforms - structure (``rte_crypto_cipher_xform``, ``rte_crypto_auth_xform``, and - ``rte_crypto_aead_xform``) will be changed to ``const uint8_t *data``. +* ethdev: Update API functions returning ``void`` to return ``int`` with + negative errno values to indicate various error conditions (e.g. + invalid port ID, unsupported operation, failed operation): + + - ``rte_eth_dev_stop`` + - ``rte_eth_dev_close`` + +* ethdev: New offload flags ``DEV_RX_OFFLOAD_FLOW_MARK`` will be added in 19.11. + This will allow application to enable or disable PMDs from updating + ``rte_mbuf::hash::fdir``. + This scheme will allow PMDs to avoid writes to ``rte_mbuf`` fields on Rx and + thereby improve Rx performance if application wishes do so. + In 19.11 PMDs will still update the field even when the offload is not + enabled. + +* ethdev: ``rx_descriptor_done`` dev_ops and ``rte_eth_rx_descriptor_done`` + will be deprecated in 20.11 and will be removed in 21.11. + Existing ``rte_eth_rx_descriptor_status`` and ``rte_eth_tx_descriptor_status`` + APIs can be used as replacement. + +* ethdev: Some internal APIs for driver usage are exported in the .map file. + Now DPDK has ``__rte_internal`` marker so we can mark internal APIs and move + them to the INTERNAL block in .map. Although these APIs are internal it will + break the ABI checks, that is why change is planned for 20.11. + The list of internal APIs are mainly ones listed in ``rte_ethdev_driver.h``. + +* traffic manager: All traffic manager API's in ``rte_tm.h`` were mistakenly made + ABI stable in the v19.11 release. The TM maintainer and other contributors have + agreed to keep the TM APIs as experimental in expectation of additional spec + improvements. Therefore, all APIs in ``rte_tm.h`` will be marked back as + experimental in v20.11 DPDK release. For more details, please see `the thread + `_. + +* pmd_dpaa: The API ``rte_pmd_dpaa_set_tx_loopback`` will have extended + ``port_id`` definition from ``uint8_t`` to ``uint16_t``. * cryptodev: support for using IV with all sizes is added, J0 still can be used but only when IV length in following structs ``rte_crypto_auth_xform``, @@ -101,6 +132,12 @@ Deprecation Notices in "rte_sched.h". These changes are aligned to improvements suggested in the RFC https://mails.dpdk.org/archives/dev/2018-November/120035.html. +* mbuf: ``refcnt_atomic`` member in structures ``rte_mbuf`` and + ``rte_mbuf_ext_shared_info`` is of type ``rte_atomic16_t``. Due to adoption + of C11 atomic builtins it will be of type ``uint16_t``. ``refcnt_atomic`` + will be removed in 20.11. It will be replaced with ``refcnt`` of type + ``uint16_t``. + * metrics: The function ``rte_metrics_init`` will have a non-void return in order to notify errors instead of calling ``rte_exit``. @@ -108,3 +145,9 @@ Deprecation Notices to set new power environment if power environment was already initialized. In this case the function will return -1 unless the environment is unset first (using ``rte_power_unset_env``). Other function usage scenarios will not change. + +* python: Since the beginning of 2020, Python 2 has officially reached + end-of-support: https://www.python.org/doc/sunset-python-2/. + Python 2 support will be completely removed in 20.11. + In 20.08, explicit deprecation warnings will be displayed when running + scripts with Python 2.