X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fixgbe%2Frte_pmd_ixgbe.h;h=84c688472973c7e47a6b9bce2f30d01a89a70cdf;hb=6d13ea8e8e49ab957deae2bba5ecf4a4bfe747d1;hp=7928c97eb6b48df8bd79d23d268f38d3de275330;hpb=49e248223e9f71de0a91172ba01f43c7e49b0d2e;p=dpdk.git

diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h b/drivers/net/ixgbe/rte_pmd_ixgbe.h
index 7928c97eb6..84c6884729 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.h
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h
@@ -1,33 +1,5 @@
-/*-
- *   BSD LICENSE
- *
- *   Copyright (c) 2016 Intel Corporation. All rights reserved.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *     * Neither the name of Intel Corporation nor the names of its
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2016 Intel Corporation
  */
 
 /**
@@ -39,7 +11,21 @@
 #ifndef _PMD_IXGBE_H_
 #define _PMD_IXGBE_H_
 
-#include <rte_ethdev.h>
+#include <rte_ethdev_driver.h>
+
+/**
+ * Notify VF when PF link status changes.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param vf
+ *   VF id.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-EINVAL) if *vf* invalid.
+ */
+int rte_pmd_ixgbe_ping_vf(uint16_t port, uint16_t vf);
 
 /**
  * Set the VF MAC address.
@@ -55,8 +41,8 @@
  *   - (-ENODEV) if *port* invalid.
  *   - (-EINVAL) if *vf* or *mac_addr* is invalid.
  */
-int rte_pmd_ixgbe_set_vf_mac_addr(uint8_t port, uint16_t vf,
-		struct ether_addr *mac_addr);
+int rte_pmd_ixgbe_set_vf_mac_addr(uint16_t port, uint16_t vf,
+		struct rte_ether_addr *mac_addr);
 
 /**
  * Enable/Disable VF VLAN anti spoofing.
@@ -73,7 +59,8 @@ int rte_pmd_ixgbe_set_vf_mac_addr(uint8_t port, uint16_t vf,
  *   - (-ENODEV) if *port* invalid.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
+int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint16_t port, uint16_t vf,
+					 uint8_t on);
 
 /**
  * Enable/Disable VF MAC anti spoofing.
@@ -90,7 +77,7 @@ int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
  *   - (-ENODEV) if *port* invalid.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
+int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint16_t port, uint16_t vf, uint8_t on);
 
 /**
  * Enable/Disable vf vlan insert
@@ -99,16 +86,17 @@ int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
  *    The port identifier of the Ethernet device.
  * @param vf
  *    ID specifying VF.
- * @param on
- *    1 - Enable VF's vlan insert.
- *    0 - Disable VF's vlan insert
+ * @param vlan_id
+ *    0 - Disable VF's vlan insert.
+ *    n - Enable; n is inserted as the vlan id.
  *
  * @return
  *   - (0) if successful.
  *   - (-ENODEV) if *port* invalid.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf, uint8_t on);
+int rte_pmd_ixgbe_set_vf_vlan_insert(uint16_t port, uint16_t vf,
+		uint16_t vlan_id);
 
 /**
  * Enable/Disable tx loopback
@@ -124,7 +112,7 @@ int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf, uint8_t on);
  *   - (-ENODEV) if *port* invalid.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_set_tx_loopback(uint8_t port, uint8_t on);
+int rte_pmd_ixgbe_set_tx_loopback(uint16_t port, uint8_t on);
 
 /**
  * set all queues drop enable bit
@@ -140,7 +128,7 @@ int rte_pmd_ixgbe_set_tx_loopback(uint8_t port, uint8_t on);
  *   - (-ENODEV) if *port* invalid.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_set_all_queues_drop_en(uint8_t port, uint8_t on);
+int rte_pmd_ixgbe_set_all_queues_drop_en(uint16_t port, uint8_t on);
 
 /**
  * set drop enable bit in the VF split rx control register
@@ -159,7 +147,7 @@ int rte_pmd_ixgbe_set_all_queues_drop_en(uint8_t port, uint8_t on);
  *   - (-EINVAL) if bad parameter.
  */
 
-int rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on);
+int rte_pmd_ixgbe_set_vf_split_drop_en(uint16_t port, uint16_t vf, uint8_t on);
 
 /**
  * Enable/Disable vf vlan strip for all queues in a pool
@@ -179,5 +167,558 @@ int rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on);
  *   - (-EINVAL) if bad parameter.
  */
 int
-rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on);
+rte_pmd_ixgbe_set_vf_vlan_stripq(uint16_t port, uint16_t vf, uint8_t on);
+
+/**
+ * Enable MACsec offload.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param en
+ *    1 - Enable encryption (encrypt and add integrity signature).
+ *    0 - Disable encryption (only add integrity signature).
+ * @param rp
+ *    1 - Enable replay protection.
+ *    0 - Disable replay protection.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ */
+int rte_pmd_ixgbe_macsec_enable(uint16_t port, uint8_t en, uint8_t rp);
+
+/**
+ * Disable MACsec offload.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ */
+int rte_pmd_ixgbe_macsec_disable(uint16_t port);
+
+/**
+ * Configure Tx SC (Secure Connection).
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param mac
+ *   The MAC address on the local side.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ */
+int rte_pmd_ixgbe_macsec_config_txsc(uint16_t port, uint8_t *mac);
+
+/**
+ * Configure Rx SC (Secure Connection).
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param mac
+ *   The MAC address on the remote side.
+ * @param pi
+ *   The PI (port identifier) on the remote side.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ */
+int rte_pmd_ixgbe_macsec_config_rxsc(uint16_t port, uint8_t *mac, uint16_t pi);
+
+/**
+ * Enable Tx SA (Secure Association).
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param idx
+ *   The SA to be enabled (0 or 1).
+ * @param an
+ *   The association number on the local side.
+ * @param pn
+ *   The packet number on the local side.
+ * @param key
+ *   The key on the local side.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_macsec_select_txsa(uint16_t port, uint8_t idx, uint8_t an,
+		uint32_t pn, uint8_t *key);
+
+/**
+ * Enable Rx SA (Secure Association).
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param idx
+ *   The SA to be enabled (0 or 1)
+ * @param an
+ *   The association number on the remote side.
+ * @param pn
+ *   The packet number on the remote side.
+ * @param key
+ *   The key on the remote side.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_macsec_select_rxsa(uint16_t port, uint8_t idx, uint8_t an,
+		uint32_t pn, uint8_t *key);
+
+/**
+* Set RX L2 Filtering mode of a VF of an Ethernet device.
+*
+* @param port
+*   The port identifier of the Ethernet device.
+* @param vf
+*   VF id.
+* @param rx_mask
+*    The RX mode mask, which is one or more of accepting Untagged Packets,
+*    packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
+*    ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
+*    ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used
+*    in rx_mode.
+* @param on
+*    1 - Enable a VF RX mode.
+*    0 - Disable a VF RX mode.
+* @return
+*   - (0) if successful.
+*   - (-ENOTSUP) if hardware doesn't support.
+*   - (-ENODEV) if *port_id* invalid.
+*   - (-EINVAL) if bad parameter.
+*/
+int
+rte_pmd_ixgbe_set_vf_rxmode(uint16_t port, uint16_t vf, uint16_t rx_mask,
+			     uint8_t on);
+
+/**
+* Enable or disable a VF traffic receive of an Ethernet device.
+*
+* @param port
+*   The port identifier of the Ethernet device.
+* @param vf
+*   VF id.
+* @param on
+*    1 - Enable a VF traffic receive.
+*    0 - Disable a VF traffic receive.
+* @return
+*   - (0) if successful.
+*   - (-ENOTSUP) if hardware doesn't support.
+*   - (-ENODEV) if *port_id* invalid.
+*   - (-EINVAL) if bad parameter.
+*/
+int
+rte_pmd_ixgbe_set_vf_rx(uint16_t port, uint16_t vf, uint8_t on);
+
+/**
+* Enable or disable a VF traffic transmit of the Ethernet device.
+*
+* @param port
+*   The port identifier of the Ethernet device.
+* @param vf
+*   VF id.
+* @param on
+*    1 - Enable a VF traffic transmit.
+*    0 - Disable a VF traffic transmit.
+* @return
+*   - (0) if successful.
+*   - (-ENODEV) if *port_id* invalid.
+*   - (-ENOTSUP) if hardware doesn't support.
+*   - (-EINVAL) if bad parameter.
+*/
+int
+rte_pmd_ixgbe_set_vf_tx(uint16_t port, uint16_t vf, uint8_t on);
+
+/**
+* Enable/Disable hardware VF VLAN filtering by an Ethernet device of
+* received VLAN packets tagged with a given VLAN Tag Identifier.
+*
+* @param port
+*   The port identifier of the Ethernet device.
+* @param vlan
+*   The VLAN Tag Identifier whose filtering must be enabled or disabled.
+* @param vf_mask
+*    Bitmap listing which VFs participate in the VLAN filtering.
+* @param vlan_on
+*    1 - Enable VFs VLAN filtering.
+*    0 - Disable VFs VLAN filtering.
+* @return
+*   - (0) if successful.
+*   - (-ENOTSUP) if hardware doesn't support.
+*   - (-ENODEV) if *port_id* invalid.
+*   - (-EINVAL) if bad parameter.
+*/
+int
+rte_pmd_ixgbe_set_vf_vlan_filter(uint16_t port, uint16_t vlan,
+				 uint64_t vf_mask, uint8_t vlan_on);
+
+/**
+ * Set the rate limitation for a vf on an Ethernet device.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param vf
+ *   VF id.
+ * @param tx_rate
+ *   The tx rate allocated from the total link speed for this VF id.
+ * @param q_msk
+ *   The queue mask which need to set the rate.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_set_vf_rate_limit(uint16_t port, uint16_t vf,
+				     uint16_t tx_rate, uint64_t q_msk);
+
+/**
+ * Set all the TCs' bandwidth weight.
+ *
+ * The bw_weight means the percentage occupied by the TC.
+ * It can be taken as the relative min bandwidth setting.
+ *
+ * @param port
+ *    The port identifier of the Ethernet device.
+ * @param tc_num
+ *    Number of TCs.
+ * @param bw_weight
+ *    An array of relative bandwidth weight for all the TCs.
+ *    The summary of the bw_weight should be 100.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-EINVAL) if bad parameter.
+ *   - (-ENOTSUP) not supported by firmware.
+ */
+int rte_pmd_ixgbe_set_tc_bw_alloc(uint16_t port,
+				  uint8_t tc_num,
+				  uint8_t *bw_weight);
+
+
+/**
+ * Initialize bypass logic. This function needs to be called before
+ * executing any other bypass API.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_init(uint16_t port);
+
+/**
+ * Return bypass state.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param state
+ *   The return bypass state.
+ *   - (1) Normal mode
+ *   - (2) Bypass mode
+ *   - (3) Isolate mode
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_state_show(uint16_t port, uint32_t *state);
+
+/**
+ * Set bypass state
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param new_state
+ *   The current bypass state.
+ *   - (1) Normal mode
+ *   - (2) Bypass mode
+ *   - (3) Isolate mode
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_state_set(uint16_t port, uint32_t *new_state);
+
+/**
+ * Return bypass state when given event occurs.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param event
+ *   The bypass event
+ *   - (1) Main power on (power button is pushed)
+ *   - (2) Auxiliary power on (power supply is being plugged)
+ *   - (3) Main power off (system shutdown and power supply is left plugged in)
+ *   - (4) Auxiliary power off (power supply is being unplugged)
+ *   - (5) Display or set the watchdog timer
+ * @param state
+ *   The bypass state when given event occurred.
+ *   - (1) Normal mode
+ *   - (2) Bypass mode
+ *   - (3) Isolate mode
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_event_show(uint16_t port,
+				    uint32_t event,
+				    uint32_t *state);
+
+/**
+ * Set bypass state when given event occurs.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param event
+ *   The bypass event
+ *   - (1) Main power on (power button is pushed)
+ *   - (2) Auxiliary power on (power supply is being plugged)
+ *   - (3) Main power off (system shutdown and power supply is left plugged in)
+ *   - (4) Auxiliary power off (power supply is being unplugged)
+ *   - (5) Display or set the watchdog timer
+ * @param state
+ *   The assigned state when given event occurs.
+ *   - (1) Normal mode
+ *   - (2) Bypass mode
+ *   - (3) Isolate mode
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_event_store(uint16_t port,
+				     uint32_t event,
+				     uint32_t state);
+
+/**
+ * Set bypass watchdog timeout count.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param timeout
+ *   The timeout to be set.
+ *   - (0) 0 seconds (timer is off)
+ *   - (1) 1.5 seconds
+ *   - (2) 2 seconds
+ *   - (3) 3 seconds
+ *   - (4) 4 seconds
+ *   - (5) 8 seconds
+ *   - (6) 16 seconds
+ *   - (7) 32 seconds
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_wd_timeout_store(uint16_t port, uint32_t timeout);
+
+/**
+ * Get bypass firmware version.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param ver
+ *   The firmware version
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_ver_show(uint16_t port, uint32_t *ver);
+
+/**
+ * Return bypass watchdog timeout in seconds
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param wd_timeout
+ *   The return watchdog timeout. "0" represents timer expired
+ *   - (0) 0 seconds (timer is off)
+ *   - (1) 1.5 seconds
+ *   - (2) 2 seconds
+ *   - (3) 3 seconds
+ *   - (4) 4 seconds
+ *   - (5) 8 seconds
+ *   - (6) 16 seconds
+ *   - (7) 32 seconds
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_wd_timeout_show(uint16_t port, uint32_t *wd_timeout);
+
+/**
+ * Reset bypass watchdog timer
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_wd_reset(uint16_t port);
+
+/**
+ * Acquire swfw semaphore lock for MDIO access
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (IXGBE_ERR_SWFW_SYNC) If sw/fw semaphore acquisition failed
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_lock(uint16_t port);
+
+/**
+ * Release swfw semaphore lock used for MDIO access
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_unlock(uint16_t port);
+
+/**
+ * Read PHY register using MDIO without MDIO lock
+ * The lock must be taken separately before calling this
+ * API
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param reg_addr
+ *   32 bit PHY Register
+ * @param dev_type
+ *   Used to define device base address
+ * @param phy_data
+ *   Pointer for reading PHY register data
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (IXGBE_ERR_PHY) If PHY read command failed
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_unlocked_read(uint16_t port, uint32_t reg_addr,
+				 uint32_t dev_type, uint16_t *phy_data);
+
+/**
+ * Write data to PHY register using without MDIO lock
+ * The lock must be taken separately before calling this
+ * API
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param reg_addr
+ *   32 bit PHY Register
+ * @param dev_type
+ *   Used to define device base address
+ * @param phy_data
+ *   Data to write to PHY register
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (IXGBE_ERR_PHY) If PHY read command failed
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_unlocked_write(uint16_t port, uint32_t reg_addr,
+				  uint32_t dev_type, uint16_t phy_data);
+
+/**
+ * Response sent back to ixgbe driver from user app after callback
+ */
+enum rte_pmd_ixgbe_mb_event_rsp {
+	RTE_PMD_IXGBE_MB_EVENT_NOOP_ACK,  /**< skip mbox request and ACK */
+	RTE_PMD_IXGBE_MB_EVENT_NOOP_NACK, /**< skip mbox request and NACK */
+	RTE_PMD_IXGBE_MB_EVENT_PROCEED,  /**< proceed with mbox request  */
+	RTE_PMD_IXGBE_MB_EVENT_MAX       /**< max value of this enum */
+};
+
+/**
+ * Data sent to the user application when the callback is executed.
+ */
+struct rte_pmd_ixgbe_mb_event_param {
+	uint16_t vfid;     /**< Virtual Function number */
+	uint16_t msg_type; /**< VF to PF message type, defined in ixgbe_mbx.h */
+	uint16_t retval;   /**< return value */
+	void *msg;         /**< pointer to message */
+};
+enum {
+	RTE_PMD_IXGBE_BYPASS_MODE_NONE,
+	RTE_PMD_IXGBE_BYPASS_MODE_NORMAL,
+	RTE_PMD_IXGBE_BYPASS_MODE_BYPASS,
+	RTE_PMD_IXGBE_BYPASS_MODE_ISOLATE,
+	RTE_PMD_IXGBE_BYPASS_MODE_NUM,
+};
+
+#define RTE_PMD_IXGBE_BYPASS_MODE_VALID(x)        \
+	((x) > RTE_PMD_IXGBE_BYPASS_MODE_NONE &&  \
+	(x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM)
+
+enum {
+	RTE_PMD_IXGBE_BYPASS_EVENT_NONE,
+	RTE_PMD_IXGBE_BYPASS_EVENT_START,
+	RTE_PMD_IXGBE_BYPASS_EVENT_OS_ON = RTE_PMD_IXGBE_BYPASS_EVENT_START,
+	RTE_PMD_IXGBE_BYPASS_EVENT_POWER_ON,
+	RTE_PMD_IXGBE_BYPASS_EVENT_OS_OFF,
+	RTE_PMD_IXGBE_BYPASS_EVENT_POWER_OFF,
+	RTE_PMD_IXGBE_BYPASS_EVENT_TIMEOUT,
+	RTE_PMD_IXGBE_BYPASS_EVENT_NUM
+};
+
+#define RTE_PMD_IXGBE_BYPASS_EVENT_VALID(x)       \
+	((x) > RTE_PMD_IXGBE_BYPASS_EVENT_NONE && \
+	(x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM)
+
+enum {
+	RTE_PMD_IXGBE_BYPASS_TMT_OFF,     /* timeout disabled. */
+	RTE_PMD_IXGBE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */
+	RTE_PMD_IXGBE_BYPASS_TMT_2_SEC,   /* timeout for 2 seconds */
+	RTE_PMD_IXGBE_BYPASS_TMT_3_SEC,   /* timeout for 3 seconds */
+	RTE_PMD_IXGBE_BYPASS_TMT_4_SEC,   /* timeout for 4 seconds */
+	RTE_PMD_IXGBE_BYPASS_TMT_8_SEC,   /* timeout for 8 seconds */
+	RTE_PMD_IXGBE_BYPASS_TMT_16_SEC,  /* timeout for 16 seconds */
+	RTE_PMD_IXGBE_BYPASS_TMT_32_SEC,  /* timeout for 32 seconds */
+	RTE_PMD_IXGBE_BYPASS_TMT_NUM
+};
+
+#define RTE_PMD_IXGBE_BYPASS_TMT_VALID(x)       \
+	((x) == RTE_PMD_IXGBE_BYPASS_TMT_OFF || \
+	((x) > RTE_PMD_IXGBE_BYPASS_TMT_OFF &&  \
+	(x) < RTE_PMD_IXGBE_BYPASS_TMT_NUM))
+
+/**
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param enable
+ *    0 to disable and nonzero to enable 'SBP' bit in FCTRL register
+ *    to receive all packets
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ */
+int __rte_experimental
+rte_pmd_ixgbe_upd_fctrl_sbp(uint16_t port, int enable);
 #endif /* _PMD_IXGBE_H_ */