X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fixgbe%2Frte_pmd_ixgbe.h;h=84c688472973c7e47a6b9bce2f30d01a89a70cdf;hb=6d13ea8e8e49ab957deae2bba5ecf4a4bfe747d1;hp=d33c285dbf0a37e665291f78a80adab27f995c2e;hpb=e261265e42a15164aa649521227f7c2c4740c703;p=dpdk.git diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h b/drivers/net/ixgbe/rte_pmd_ixgbe.h index d33c285dbf..84c6884729 100644 --- a/drivers/net/ixgbe/rte_pmd_ixgbe.h +++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h @@ -1,33 +1,5 @@ -/*- - * BSD LICENSE - * - * Copyright (c) 2016 Intel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2016 Intel Corporation */ /** @@ -39,7 +11,7 @@ #ifndef _PMD_IXGBE_H_ #define _PMD_IXGBE_H_ -#include +#include /** * Notify VF when PF link status changes. @@ -53,7 +25,7 @@ * - (-ENODEV) if *port* invalid. * - (-EINVAL) if *vf* invalid. */ -int rte_pmd_ixgbe_ping_vf(uint8_t port, uint16_t vf); +int rte_pmd_ixgbe_ping_vf(uint16_t port, uint16_t vf); /** * Set the VF MAC address. @@ -69,8 +41,8 @@ int rte_pmd_ixgbe_ping_vf(uint8_t port, uint16_t vf); * - (-ENODEV) if *port* invalid. * - (-EINVAL) if *vf* or *mac_addr* is invalid. */ -int rte_pmd_ixgbe_set_vf_mac_addr(uint8_t port, uint16_t vf, - struct ether_addr *mac_addr); +int rte_pmd_ixgbe_set_vf_mac_addr(uint16_t port, uint16_t vf, + struct rte_ether_addr *mac_addr); /** * Enable/Disable VF VLAN anti spoofing. @@ -87,7 +59,8 @@ int rte_pmd_ixgbe_set_vf_mac_addr(uint8_t port, uint16_t vf, * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on); +int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint16_t port, uint16_t vf, + uint8_t on); /** * Enable/Disable VF MAC anti spoofing. @@ -104,7 +77,7 @@ int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on); * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on); +int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint16_t port, uint16_t vf, uint8_t on); /** * Enable/Disable vf vlan insert @@ -122,7 +95,7 @@ int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on); * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf, +int rte_pmd_ixgbe_set_vf_vlan_insert(uint16_t port, uint16_t vf, uint16_t vlan_id); /** @@ -139,7 +112,7 @@ int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf, * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_tx_loopback(uint8_t port, uint8_t on); +int rte_pmd_ixgbe_set_tx_loopback(uint16_t port, uint8_t on); /** * set all queues drop enable bit @@ -155,7 +128,7 @@ int rte_pmd_ixgbe_set_tx_loopback(uint8_t port, uint8_t on); * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_all_queues_drop_en(uint8_t port, uint8_t on); +int rte_pmd_ixgbe_set_all_queues_drop_en(uint16_t port, uint8_t on); /** * set drop enable bit in the VF split rx control register @@ -174,7 +147,7 @@ int rte_pmd_ixgbe_set_all_queues_drop_en(uint8_t port, uint8_t on); * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on); +int rte_pmd_ixgbe_set_vf_split_drop_en(uint16_t port, uint16_t vf, uint8_t on); /** * Enable/Disable vf vlan strip for all queues in a pool @@ -194,7 +167,7 @@ int rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on); * - (-EINVAL) if bad parameter. */ int -rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on); +rte_pmd_ixgbe_set_vf_vlan_stripq(uint16_t port, uint16_t vf, uint8_t on); /** * Enable MACsec offload. @@ -212,7 +185,7 @@ rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on); * - (-ENODEV) if *port* invalid. * - (-ENOTSUP) if hardware doesn't support this feature. */ -int rte_pmd_ixgbe_macsec_enable(uint8_t port, uint8_t en, uint8_t rp); +int rte_pmd_ixgbe_macsec_enable(uint16_t port, uint8_t en, uint8_t rp); /** * Disable MACsec offload. @@ -224,7 +197,7 @@ int rte_pmd_ixgbe_macsec_enable(uint8_t port, uint8_t en, uint8_t rp); * - (-ENODEV) if *port* invalid. * - (-ENOTSUP) if hardware doesn't support this feature. */ -int rte_pmd_ixgbe_macsec_disable(uint8_t port); +int rte_pmd_ixgbe_macsec_disable(uint16_t port); /** * Configure Tx SC (Secure Connection). @@ -238,7 +211,7 @@ int rte_pmd_ixgbe_macsec_disable(uint8_t port); * - (-ENODEV) if *port* invalid. * - (-ENOTSUP) if hardware doesn't support this feature. */ -int rte_pmd_ixgbe_macsec_config_txsc(uint8_t port, uint8_t *mac); +int rte_pmd_ixgbe_macsec_config_txsc(uint16_t port, uint8_t *mac); /** * Configure Rx SC (Secure Connection). @@ -254,7 +227,7 @@ int rte_pmd_ixgbe_macsec_config_txsc(uint8_t port, uint8_t *mac); * - (-ENODEV) if *port* invalid. * - (-ENOTSUP) if hardware doesn't support this feature. */ -int rte_pmd_ixgbe_macsec_config_rxsc(uint8_t port, uint8_t *mac, uint16_t pi); +int rte_pmd_ixgbe_macsec_config_rxsc(uint16_t port, uint8_t *mac, uint16_t pi); /** * Enable Tx SA (Secure Association). @@ -275,7 +248,7 @@ int rte_pmd_ixgbe_macsec_config_rxsc(uint8_t port, uint8_t *mac, uint16_t pi); * - (-ENOTSUP) if hardware doesn't support this feature. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_macsec_select_txsa(uint8_t port, uint8_t idx, uint8_t an, +int rte_pmd_ixgbe_macsec_select_txsa(uint16_t port, uint8_t idx, uint8_t an, uint32_t pn, uint8_t *key); /** @@ -297,7 +270,7 @@ int rte_pmd_ixgbe_macsec_select_txsa(uint8_t port, uint8_t idx, uint8_t an, * - (-ENOTSUP) if hardware doesn't support this feature. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_macsec_select_rxsa(uint8_t port, uint8_t idx, uint8_t an, +int rte_pmd_ixgbe_macsec_select_rxsa(uint16_t port, uint8_t idx, uint8_t an, uint32_t pn, uint8_t *key); /** @@ -323,7 +296,8 @@ int rte_pmd_ixgbe_macsec_select_rxsa(uint8_t port, uint8_t idx, uint8_t an, * - (-EINVAL) if bad parameter. */ int -rte_pmd_ixgbe_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mask, uint8_t on); +rte_pmd_ixgbe_set_vf_rxmode(uint16_t port, uint16_t vf, uint16_t rx_mask, + uint8_t on); /** * Enable or disable a VF traffic receive of an Ethernet device. @@ -342,7 +316,7 @@ rte_pmd_ixgbe_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mask, uint8_t * - (-EINVAL) if bad parameter. */ int -rte_pmd_ixgbe_set_vf_rx(uint8_t port, uint16_t vf, uint8_t on); +rte_pmd_ixgbe_set_vf_rx(uint16_t port, uint16_t vf, uint8_t on); /** * Enable or disable a VF traffic transmit of the Ethernet device. @@ -361,7 +335,7 @@ rte_pmd_ixgbe_set_vf_rx(uint8_t port, uint16_t vf, uint8_t on); * - (-EINVAL) if bad parameter. */ int -rte_pmd_ixgbe_set_vf_tx(uint8_t port, uint16_t vf, uint8_t on); +rte_pmd_ixgbe_set_vf_tx(uint16_t port, uint16_t vf, uint8_t on); /** * Enable/Disable hardware VF VLAN filtering by an Ethernet device of @@ -383,7 +357,8 @@ rte_pmd_ixgbe_set_vf_tx(uint8_t port, uint16_t vf, uint8_t on); * - (-EINVAL) if bad parameter. */ int -rte_pmd_ixgbe_set_vf_vlan_filter(uint8_t port, uint16_t vlan, uint64_t vf_mask, uint8_t vlan_on); +rte_pmd_ixgbe_set_vf_vlan_filter(uint16_t port, uint16_t vlan, + uint64_t vf_mask, uint8_t vlan_on); /** * Set the rate limitation for a vf on an Ethernet device. @@ -402,7 +377,8 @@ rte_pmd_ixgbe_set_vf_vlan_filter(uint8_t port, uint16_t vlan, uint64_t vf_mask, * - (-ENODEV) if *port_id* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_vf_rate_limit(uint8_t port, uint16_t vf, uint16_t tx_rate, uint64_t q_msk); +int rte_pmd_ixgbe_set_vf_rate_limit(uint16_t port, uint16_t vf, + uint16_t tx_rate, uint64_t q_msk); /** * Set all the TCs' bandwidth weight. @@ -423,7 +399,7 @@ int rte_pmd_ixgbe_set_vf_rate_limit(uint8_t port, uint16_t vf, uint16_t tx_rate, * - (-EINVAL) if bad parameter. * - (-ENOTSUP) not supported by firmware. */ -int rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port, +int rte_pmd_ixgbe_set_tc_bw_alloc(uint16_t port, uint8_t tc_num, uint8_t *bw_weight); @@ -439,7 +415,7 @@ int rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port, * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_init(uint8_t port); +int rte_pmd_ixgbe_bypass_init(uint16_t port); /** * Return bypass state. @@ -456,7 +432,7 @@ int rte_pmd_ixgbe_bypass_init(uint8_t port); * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_state_show(uint8_t port, uint32_t *state); +int rte_pmd_ixgbe_bypass_state_show(uint16_t port, uint32_t *state); /** * Set bypass state @@ -473,7 +449,7 @@ int rte_pmd_ixgbe_bypass_state_show(uint8_t port, uint32_t *state); * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_state_set(uint8_t port, uint32_t *new_state); +int rte_pmd_ixgbe_bypass_state_set(uint16_t port, uint32_t *new_state); /** * Return bypass state when given event occurs. @@ -497,7 +473,7 @@ int rte_pmd_ixgbe_bypass_state_set(uint8_t port, uint32_t *new_state); * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_event_show(uint8_t port, +int rte_pmd_ixgbe_bypass_event_show(uint16_t port, uint32_t event, uint32_t *state); @@ -523,7 +499,7 @@ int rte_pmd_ixgbe_bypass_event_show(uint8_t port, * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_event_store(uint8_t port, +int rte_pmd_ixgbe_bypass_event_store(uint16_t port, uint32_t event, uint32_t state); @@ -547,7 +523,7 @@ int rte_pmd_ixgbe_bypass_event_store(uint8_t port, * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_wd_timeout_store(uint8_t port, uint32_t timeout); +int rte_pmd_ixgbe_bypass_wd_timeout_store(uint16_t port, uint32_t timeout); /** * Get bypass firmware version. @@ -561,7 +537,7 @@ int rte_pmd_ixgbe_bypass_wd_timeout_store(uint8_t port, uint32_t timeout); * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_ver_show(uint8_t port, uint32_t *ver); +int rte_pmd_ixgbe_bypass_ver_show(uint16_t port, uint32_t *ver); /** * Return bypass watchdog timeout in seconds @@ -583,7 +559,7 @@ int rte_pmd_ixgbe_bypass_ver_show(uint8_t port, uint32_t *ver); * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout); +int rte_pmd_ixgbe_bypass_wd_timeout_show(uint16_t port, uint32_t *wd_timeout); /** * Reset bypass watchdog timer @@ -595,8 +571,79 @@ int rte_pmd_ixgbe_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout); * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_wd_reset(uint8_t port); +int rte_pmd_ixgbe_bypass_wd_reset(uint16_t port); +/** + * Acquire swfw semaphore lock for MDIO access + * + * @param port + * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port* invalid. + * - (IXGBE_ERR_SWFW_SYNC) If sw/fw semaphore acquisition failed + */ +int __rte_experimental +rte_pmd_ixgbe_mdio_lock(uint16_t port); + +/** + * Release swfw semaphore lock used for MDIO access + * + * @param port + * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port* invalid. + */ +int __rte_experimental +rte_pmd_ixgbe_mdio_unlock(uint16_t port); + +/** + * Read PHY register using MDIO without MDIO lock + * The lock must be taken separately before calling this + * API + * @param port + * The port identifier of the Ethernet device. + * @param reg_addr + * 32 bit PHY Register + * @param dev_type + * Used to define device base address + * @param phy_data + * Pointer for reading PHY register data + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port* invalid. + * - (IXGBE_ERR_PHY) If PHY read command failed + */ +int __rte_experimental +rte_pmd_ixgbe_mdio_unlocked_read(uint16_t port, uint32_t reg_addr, + uint32_t dev_type, uint16_t *phy_data); + +/** + * Write data to PHY register using without MDIO lock + * The lock must be taken separately before calling this + * API + * + * @param port + * The port identifier of the Ethernet device. + * @param reg_addr + * 32 bit PHY Register + * @param dev_type + * Used to define device base address + * @param phy_data + * Data to write to PHY register + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port* invalid. + * - (IXGBE_ERR_PHY) If PHY read command failed + */ +int __rte_experimental +rte_pmd_ixgbe_mdio_unlocked_write(uint16_t port, uint32_t reg_addr, + uint32_t dev_type, uint16_t phy_data); /** * Response sent back to ixgbe driver from user app after callback @@ -661,4 +708,17 @@ enum { ((x) > RTE_PMD_IXGBE_BYPASS_TMT_OFF && \ (x) < RTE_PMD_IXGBE_BYPASS_TMT_NUM)) +/** + * @param port + * The port identifier of the Ethernet device. + * @param enable + * 0 to disable and nonzero to enable 'SBP' bit in FCTRL register + * to receive all packets + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. + */ +int __rte_experimental +rte_pmd_ixgbe_upd_fctrl_sbp(uint16_t port, int enable); #endif /* _PMD_IXGBE_H_ */