X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=lib%2Flibrte_ethdev%2Frte_ethdev.h;h=bd0bca6e00c8d06ed894e9a02865dd8f1ef0d5cd;hb=78d44153de8f7041ff35cb2c676fac8b9488f753;hp=fa2812bcaede6a46a8223ad52f19e273b413e0b2;hpb=1e5e3d2e72c6bfdb3553be26015b7ee5bbf745c1;p=dpdk.git diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h index fa2812bcae..bd0bca6e00 100644 --- a/lib/librte_ethdev/rte_ethdev.h +++ b/lib/librte_ethdev/rte_ethdev.h @@ -80,10 +80,12 @@ * rte_eth_dev_stop()/rte_eth_dev_start(). The following configuration will * be retained: * + * - MTU * - flow control settings - * - receive mode configuration (promiscuous mode, hardware checksum mode, - * RSS/VMDQ settings etc.) + * - receive mode configuration (promiscuous mode, all-multicast mode, + * hardware checksum mode, RSS/VMDQ settings etc.) * - VLAN filtering configuration + * - default MAC address * - MAC addresses supplied to MAC address array * - flow director filtering mode (but not filtering rules) * - NIC queue statistics mappings @@ -154,9 +156,9 @@ extern "C" { #include #include #include +#include -#include "rte_ether.h" -#include "rte_eth_ctrl.h" +#include "rte_ethdev_trace_fp.h" #include "rte_dev_info.h" extern int rte_eth_dev_logtype; @@ -166,6 +168,73 @@ extern int rte_eth_dev_logtype; struct rte_mbuf; +/** + * Initializes a device iterator. + * + * This iterator allows accessing a list of devices matching some devargs. + * + * @param iter + * Device iterator handle initialized by the function. + * The fields bus_str and cls_str might be dynamically allocated, + * and could be freed by calling rte_eth_iterator_cleanup(). + * + * @param devargs + * Device description string. + * + * @return + * 0 on successful initialization, negative otherwise. + */ +int rte_eth_iterator_init(struct rte_dev_iterator *iter, const char *devargs); + +/** + * Iterates on devices with devargs filter. + * The ownership is not checked. + * + * The next port id is returned, and the iterator is updated. + * + * @param iter + * Device iterator handle initialized by rte_eth_iterator_init(). + * Some fields bus_str and cls_str might be freed when no more port is found, + * by calling rte_eth_iterator_cleanup(). + * + * @return + * A port id if found, RTE_MAX_ETHPORTS otherwise. + */ +uint16_t rte_eth_iterator_next(struct rte_dev_iterator *iter); + +/** + * Free some allocated fields of the iterator. + * + * This function is automatically called by rte_eth_iterator_next() + * on the last iteration (i.e. when no more matching port is found). + * + * It is safe to call this function twice; it will do nothing more. + * + * @param iter + * Device iterator handle initialized by rte_eth_iterator_init(). + * The fields bus_str and cls_str are freed if needed. + */ +void rte_eth_iterator_cleanup(struct rte_dev_iterator *iter); + +/** + * Macro to iterate over all ethdev ports matching some devargs. + * + * If a break is done before the end of the loop, + * the function rte_eth_iterator_cleanup() must be called. + * + * @param id + * Iterated port id of type uint16_t. + * @param devargs + * Device parameters input as string of type char*. + * @param iter + * Iterator handle of type struct rte_dev_iterator, used internally. + */ +#define RTE_ETH_FOREACH_MATCHING_DEV(id, devargs, iter) \ + for (rte_eth_iterator_init(iter, devargs), \ + id = rte_eth_iterator_next(iter); \ + id != RTE_MAX_ETHPORTS; \ + id = rte_eth_iterator_next(iter)) + /** * A structure used to retrieve statistics for an Ethernet port. * Not all statistics fields in struct rte_eth_stats are supported @@ -242,7 +311,7 @@ struct rte_eth_link { uint16_t link_duplex : 1; /**< ETH_LINK_[HALF/FULL]_DUPLEX */ uint16_t link_autoneg : 1; /**< ETH_LINK_[AUTONEG/FIXED] */ uint16_t link_status : 1; /**< ETH_LINK_[DOWN/UP] */ -} __attribute__((aligned(8))); /**< aligned for atomic64 read/write */ +} __rte_aligned(8); /**< aligned for atomic64 read/write */ /* Utility constants */ #define ETH_LINK_HALF_DUPLEX 0 /**< Half-duplex connection (see link_duplex). */ @@ -327,6 +396,8 @@ struct rte_eth_rxmode { /** The multi-queue packet distribution mode to be used, e.g. RSS. */ enum rte_eth_rx_mq_mode mq_mode; uint32_t max_rx_pkt_len; /**< Only used if JUMBO_FRAME enabled. */ + /** Maximum allowed size of LRO aggregated packet. */ + uint32_t max_lro_pkt_size; uint16_t split_hdr_size; /**< hdr buf size (header_split enabled).*/ /** * Per-port Rx offloads to be set using DEV_RX_OFFLOAD_* flags. @@ -334,6 +405,9 @@ struct rte_eth_rxmode { * structure are allowed to be set. */ uint64_t offloads; + + uint64_t reserved_64s[2]; /**< Reserved for future fields */ + void *reserved_ptrs[2]; /**< Reserved for future fields */ }; /** @@ -379,31 +453,101 @@ struct rte_eth_rss_conf { }; /* - * The RSS offload types are defined based on flow types which are defined - * in rte_eth_ctrl.h. Different NIC hardwares may support different RSS offload - * types. The supported flow types or RSS offload types can be queried by - * rte_eth_dev_info_get(). - */ -#define ETH_RSS_IPV4 (1ULL << RTE_ETH_FLOW_IPV4) -#define ETH_RSS_FRAG_IPV4 (1ULL << RTE_ETH_FLOW_FRAG_IPV4) -#define ETH_RSS_NONFRAG_IPV4_TCP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_TCP) -#define ETH_RSS_NONFRAG_IPV4_UDP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_UDP) -#define ETH_RSS_NONFRAG_IPV4_SCTP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_SCTP) -#define ETH_RSS_NONFRAG_IPV4_OTHER (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_OTHER) -#define ETH_RSS_IPV6 (1ULL << RTE_ETH_FLOW_IPV6) -#define ETH_RSS_FRAG_IPV6 (1ULL << RTE_ETH_FLOW_FRAG_IPV6) -#define ETH_RSS_NONFRAG_IPV6_TCP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_TCP) -#define ETH_RSS_NONFRAG_IPV6_UDP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_UDP) -#define ETH_RSS_NONFRAG_IPV6_SCTP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_SCTP) -#define ETH_RSS_NONFRAG_IPV6_OTHER (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_OTHER) -#define ETH_RSS_L2_PAYLOAD (1ULL << RTE_ETH_FLOW_L2_PAYLOAD) -#define ETH_RSS_IPV6_EX (1ULL << RTE_ETH_FLOW_IPV6_EX) -#define ETH_RSS_IPV6_TCP_EX (1ULL << RTE_ETH_FLOW_IPV6_TCP_EX) -#define ETH_RSS_IPV6_UDP_EX (1ULL << RTE_ETH_FLOW_IPV6_UDP_EX) -#define ETH_RSS_PORT (1ULL << RTE_ETH_FLOW_PORT) -#define ETH_RSS_VXLAN (1ULL << RTE_ETH_FLOW_VXLAN) -#define ETH_RSS_GENEVE (1ULL << RTE_ETH_FLOW_GENEVE) -#define ETH_RSS_NVGRE (1ULL << RTE_ETH_FLOW_NVGRE) + * A packet can be identified by hardware as different flow types. Different + * NIC hardware may support different flow types. + * Basically, the NIC hardware identifies the flow type as deep protocol as + * possible, and exclusively. For example, if a packet is identified as + * 'RTE_ETH_FLOW_NONFRAG_IPV4_TCP', it will not be any of other flow types, + * though it is an actual IPV4 packet. + */ +#define RTE_ETH_FLOW_UNKNOWN 0 +#define RTE_ETH_FLOW_RAW 1 +#define RTE_ETH_FLOW_IPV4 2 +#define RTE_ETH_FLOW_FRAG_IPV4 3 +#define RTE_ETH_FLOW_NONFRAG_IPV4_TCP 4 +#define RTE_ETH_FLOW_NONFRAG_IPV4_UDP 5 +#define RTE_ETH_FLOW_NONFRAG_IPV4_SCTP 6 +#define RTE_ETH_FLOW_NONFRAG_IPV4_OTHER 7 +#define RTE_ETH_FLOW_IPV6 8 +#define RTE_ETH_FLOW_FRAG_IPV6 9 +#define RTE_ETH_FLOW_NONFRAG_IPV6_TCP 10 +#define RTE_ETH_FLOW_NONFRAG_IPV6_UDP 11 +#define RTE_ETH_FLOW_NONFRAG_IPV6_SCTP 12 +#define RTE_ETH_FLOW_NONFRAG_IPV6_OTHER 13 +#define RTE_ETH_FLOW_L2_PAYLOAD 14 +#define RTE_ETH_FLOW_IPV6_EX 15 +#define RTE_ETH_FLOW_IPV6_TCP_EX 16 +#define RTE_ETH_FLOW_IPV6_UDP_EX 17 +#define RTE_ETH_FLOW_PORT 18 + /**< Consider device port number as a flow differentiator */ +#define RTE_ETH_FLOW_VXLAN 19 /**< VXLAN protocol based flow */ +#define RTE_ETH_FLOW_GENEVE 20 /**< GENEVE protocol based flow */ +#define RTE_ETH_FLOW_NVGRE 21 /**< NVGRE protocol based flow */ +#define RTE_ETH_FLOW_VXLAN_GPE 22 /**< VXLAN-GPE protocol based flow */ +#define RTE_ETH_FLOW_GTPU 23 /**< GTPU protocol based flow */ +#define RTE_ETH_FLOW_MAX 24 + +/* + * Below macros are defined for RSS offload types, they can be used to + * fill rte_eth_rss_conf.rss_hf or rte_flow_action_rss.types. + */ +#define ETH_RSS_IPV4 (1ULL << 2) +#define ETH_RSS_FRAG_IPV4 (1ULL << 3) +#define ETH_RSS_NONFRAG_IPV4_TCP (1ULL << 4) +#define ETH_RSS_NONFRAG_IPV4_UDP (1ULL << 5) +#define ETH_RSS_NONFRAG_IPV4_SCTP (1ULL << 6) +#define ETH_RSS_NONFRAG_IPV4_OTHER (1ULL << 7) +#define ETH_RSS_IPV6 (1ULL << 8) +#define ETH_RSS_FRAG_IPV6 (1ULL << 9) +#define ETH_RSS_NONFRAG_IPV6_TCP (1ULL << 10) +#define ETH_RSS_NONFRAG_IPV6_UDP (1ULL << 11) +#define ETH_RSS_NONFRAG_IPV6_SCTP (1ULL << 12) +#define ETH_RSS_NONFRAG_IPV6_OTHER (1ULL << 13) +#define ETH_RSS_L2_PAYLOAD (1ULL << 14) +#define ETH_RSS_IPV6_EX (1ULL << 15) +#define ETH_RSS_IPV6_TCP_EX (1ULL << 16) +#define ETH_RSS_IPV6_UDP_EX (1ULL << 17) +#define ETH_RSS_PORT (1ULL << 18) +#define ETH_RSS_VXLAN (1ULL << 19) +#define ETH_RSS_GENEVE (1ULL << 20) +#define ETH_RSS_NVGRE (1ULL << 21) +#define ETH_RSS_GTPU (1ULL << 23) + +/* + * We use the following macros to combine with above ETH_RSS_* for + * more specific input set selection. These bits are defined starting + * from the high end of the 64 bits. + * Note: If we use above ETH_RSS_* without SRC/DST_ONLY, it represents + * both SRC and DST are taken into account. If SRC_ONLY and DST_ONLY of + * the same level are used simultaneously, it is the same case as none of + * them are added. + */ +#define ETH_RSS_L3_SRC_ONLY (1ULL << 63) +#define ETH_RSS_L3_DST_ONLY (1ULL << 62) +#define ETH_RSS_L4_SRC_ONLY (1ULL << 61) +#define ETH_RSS_L4_DST_ONLY (1ULL << 60) + +/** + * For input set change of hash filter, if SRC_ONLY and DST_ONLY of + * the same level are used simultaneously, it is the same case as + * none of them are added. + * + * @param rss_hf + * RSS types with SRC/DST_ONLY. + * @return + * RSS types. + */ +static inline uint64_t +rte_eth_rss_hf_refine(uint64_t rss_hf) +{ + if ((rss_hf & ETH_RSS_L3_SRC_ONLY) && (rss_hf & ETH_RSS_L3_DST_ONLY)) + rss_hf &= ~(ETH_RSS_L3_SRC_ONLY | ETH_RSS_L3_DST_ONLY); + + if ((rss_hf & ETH_RSS_L4_SRC_ONLY) && (rss_hf & ETH_RSS_L4_DST_ONLY)) + rss_hf &= ~(ETH_RSS_L4_SRC_ONLY | ETH_RSS_L4_DST_ONLY); + + return rss_hf; +} #define ETH_RSS_IP ( \ ETH_RSS_IPV4 | \ @@ -481,11 +625,13 @@ struct rte_eth_rss_conf { #define ETH_VLAN_STRIP_OFFLOAD 0x0001 /**< VLAN Strip On/Off */ #define ETH_VLAN_FILTER_OFFLOAD 0x0002 /**< VLAN Filter On/Off */ #define ETH_VLAN_EXTEND_OFFLOAD 0x0004 /**< VLAN Extend On/Off */ +#define ETH_QINQ_STRIP_OFFLOAD 0x0008 /**< QINQ Strip On/Off */ /* Definitions used for mask VLAN setting */ #define ETH_VLAN_STRIP_MASK 0x0001 /**< VLAN Strip setting mask */ #define ETH_VLAN_FILTER_MASK 0x0002 /**< VLAN Filter setting mask*/ #define ETH_VLAN_EXTEND_MASK 0x0004 /**< VLAN Extend setting mask*/ +#define ETH_QINQ_STRIP_MASK 0x0008 /**< QINQ Strip setting mask */ #define ETH_VLAN_ID_MAX 0x0FFF /**< VLAN ID is in lower 12 bits*/ /* Definitions used for receive MAC address */ @@ -662,6 +808,9 @@ struct rte_eth_txmode { /**< If set, reject sending out untagged pkts */ hw_vlan_insert_pvid : 1; /**< If set, enable port based VLAN insertion */ + + uint64_t reserved_64s[2]; /**< Reserved for future fields */ + void *reserved_ptrs[2]; /**< Reserved for future fields */ }; /** @@ -678,6 +827,9 @@ struct rte_eth_rxconf { * fields on rte_eth_dev_info structure are allowed to be set. */ uint64_t offloads; + + uint64_t reserved_64s[2]; /**< Reserved for future fields */ + void *reserved_ptrs[2]; /**< Reserved for future fields */ }; /** @@ -696,6 +848,49 @@ struct rte_eth_txconf { * fields on rte_eth_dev_info structure are allowed to be set. */ uint64_t offloads; + + uint64_t reserved_64s[2]; /**< Reserved for future fields */ + void *reserved_ptrs[2]; /**< Reserved for future fields */ +}; + +/** + * @warning + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice + * + * A structure used to return the hairpin capabilities that are supported. + */ +struct rte_eth_hairpin_cap { + /** The max number of hairpin queues (different bindings). */ + uint16_t max_nb_queues; + /** Max number of Rx queues to be connected to one Tx queue. */ + uint16_t max_rx_2_tx; + /** Max number of Tx queues to be connected to one Rx queue. */ + uint16_t max_tx_2_rx; + uint16_t max_nb_desc; /**< The max num of descriptors. */ +}; + +#define RTE_ETH_MAX_HAIRPIN_PEERS 32 + +/** + * @warning + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice + * + * A structure used to hold hairpin peer data. + */ +struct rte_eth_hairpin_peer { + uint16_t port; /**< Peer port. */ + uint16_t queue; /**< Peer queue. */ +}; + +/** + * @warning + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice + * + * A structure used to configure hairpin binding. + */ +struct rte_eth_hairpin_conf { + uint16_t peer_count; /**< The number of peers. */ + struct rte_eth_hairpin_peer peers[RTE_ETH_MAX_HAIRPIN_PEERS]; }; /** @@ -765,6 +960,24 @@ struct rte_eth_pfc_conf { uint8_t priority; /**< VLAN User Priority. */ }; +/** + * Tunneled type. + */ +enum rte_eth_tunnel_type { + RTE_TUNNEL_TYPE_NONE = 0, + RTE_TUNNEL_TYPE_VXLAN, + RTE_TUNNEL_TYPE_GENEVE, + RTE_TUNNEL_TYPE_TEREDO, + RTE_TUNNEL_TYPE_NVGRE, + RTE_TUNNEL_TYPE_IP_IN_GRE, + RTE_L2_TUNNEL_TYPE_E_TAG, + RTE_TUNNEL_TYPE_VXLAN_GPE, + RTE_TUNNEL_TYPE_MAX, +}; + +/* Deprecated API file for rte_eth_dev_filter_* functions */ +#include "rte_eth_ctrl.h" + /** * Memory space that can be configured to store Flow Director filters * in the board memory. @@ -788,7 +1001,7 @@ enum rte_fdir_status_mode { * A structure used to configure the Flow Director (FDIR) feature * of an Ethernet port. * - * If mode is RTE_FDIR_DISABLE, the pballoc value is ignored. + * If mode is RTE_FDIR_MODE_NONE, the pballoc value is ignored. */ struct rte_fdir_conf { enum rte_fdir_mode mode; /**< Flow Director mode. */ @@ -865,16 +1078,10 @@ struct rte_eth_conf { /** Currently,Priority Flow Control(PFC) are supported,if DCB with PFC is needed,and the variable must be set ETH_DCB_PFC_SUPPORT. */ uint32_t dcb_capability_en; - struct rte_fdir_conf fdir_conf; /**< FDIR configuration. */ + struct rte_fdir_conf fdir_conf; /**< FDIR configuration. DEPRECATED */ struct rte_intr_conf intr_conf; /**< Interrupt mode configuration. */ }; -/** - * A structure used to retrieve the contextual information of - * an Ethernet device, such as the controlling driver of the device, - * its PCI context, etc... - */ - /** * RX offload capabilities of a device. */ @@ -890,22 +1097,21 @@ struct rte_eth_conf { #define DEV_RX_OFFLOAD_VLAN_FILTER 0x00000200 #define DEV_RX_OFFLOAD_VLAN_EXTEND 0x00000400 #define DEV_RX_OFFLOAD_JUMBO_FRAME 0x00000800 -#define DEV_RX_OFFLOAD_CRC_STRIP 0x00001000 #define DEV_RX_OFFLOAD_SCATTER 0x00002000 #define DEV_RX_OFFLOAD_TIMESTAMP 0x00004000 #define DEV_RX_OFFLOAD_SECURITY 0x00008000 - -/** - * Invalid to set both DEV_RX_OFFLOAD_CRC_STRIP and DEV_RX_OFFLOAD_KEEP_CRC - * No DEV_RX_OFFLOAD_CRC_STRIP flag means keep CRC - */ #define DEV_RX_OFFLOAD_KEEP_CRC 0x00010000 +#define DEV_RX_OFFLOAD_SCTP_CKSUM 0x00020000 +#define DEV_RX_OFFLOAD_OUTER_UDP_CKSUM 0x00040000 +#define DEV_RX_OFFLOAD_RSS_HASH 0x00080000 + #define DEV_RX_OFFLOAD_CHECKSUM (DEV_RX_OFFLOAD_IPV4_CKSUM | \ DEV_RX_OFFLOAD_UDP_CKSUM | \ DEV_RX_OFFLOAD_TCP_CKSUM) #define DEV_RX_OFFLOAD_VLAN (DEV_RX_OFFLOAD_VLAN_STRIP | \ DEV_RX_OFFLOAD_VLAN_FILTER | \ - DEV_RX_OFFLOAD_VLAN_EXTEND) + DEV_RX_OFFLOAD_VLAN_EXTEND | \ + DEV_RX_OFFLOAD_QINQ_STRIP) /* * If new Rx offload capabilities are defined, they also must be @@ -953,6 +1159,8 @@ struct rte_eth_conf { * for tunnel TSO. */ #define DEV_TX_OFFLOAD_IP_TNL_TSO 0x00080000 +/** Device supports outer UDP checksum */ +#define DEV_TX_OFFLOAD_OUTER_UDP_CKSUM 0x00100000 #define RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP 0x00000001 /**< Device supports Rx queue setup after device started*/ @@ -989,7 +1197,7 @@ struct rte_eth_dev_portconf { * Default values for switch domain id when ethdev does not support switch * domain definitions. */ -#define RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID (0) +#define RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID (UINT16_MAX) /** * Ethernet device associated switch information @@ -1010,14 +1218,24 @@ struct rte_eth_switch_info { /** * Ethernet device information */ + +/** + * A structure used to retrieve the contextual information of + * an Ethernet device, such as the controlling driver of the + * device, etc... + */ struct rte_eth_dev_info { struct rte_device *device; /** Generic device information */ const char *driver_name; /**< Device Driver name. */ unsigned int if_index; /**< Index to bound host interface, or 0 if none. Use if_indextoname() to translate into an interface name. */ + uint16_t min_mtu; /**< Minimum MTU allowed */ + uint16_t max_mtu; /**< Maximum MTU allowed */ const uint32_t *dev_flags; /**< Device flags */ uint32_t min_rx_bufsize; /**< Minimum size of RX buffer. */ uint32_t max_rx_pktlen; /**< Maximum configurable length of RX pkt. */ + /** Maximum configurable size of LRO aggregated packet. */ + uint32_t max_lro_pkt_size; uint16_t max_rx_queues; /**< Maximum number of RX queues. */ uint16_t max_tx_queues; /**< Maximum number of TX queues. */ uint32_t max_mac_addrs; /**< Maximum number of MAC addresses. */ @@ -1060,11 +1278,14 @@ struct rte_eth_dev_info { * embedded managed interconnect/switch. */ struct rte_eth_switch_info switch_info; + + uint64_t reserved_64s[2]; /**< Reserved for future fields */ + void *reserved_ptrs[2]; /**< Reserved for future fields */ }; /** * Ethernet device RX queue information structure. - * Used to retieve information about configured queue. + * Used to retrieve information about configured queue. */ struct rte_eth_rxq_info { struct rte_mempool *mp; /**< mempool used by that queue. */ @@ -1082,6 +1303,26 @@ struct rte_eth_txq_info { uint16_t nb_desc; /**< configured number of TXDs. */ } __rte_cache_min_aligned; +/* Generic Burst mode flag definition, values can be ORed. */ + +/** + * If the queues have different burst mode description, this bit will be set + * by PMD, then the application can iterate to retrieve burst description for + * all other queues. + */ +#define RTE_ETH_BURST_FLAG_PER_QUEUE (1ULL << 0) + +/** + * Ethernet device RX/TX queue packet burst mode information structure. + * Used to retrieve information about packet burst mode setting. + */ +struct rte_eth_burst_mode { + uint64_t flags; /**< The ORed values of RTE_ETH_BURST_FLAG_xxx */ + +#define RTE_ETH_BURST_MODE_INFO_SIZE 1024 /**< Maximum size for information */ + char info[RTE_ETH_BURST_MODE_INFO_SIZE]; /**< burst mode information */ +}; + /** Maximum name length for extended statistics counters */ #define RTE_ETH_XSTATS_NAME_SIZE 64 @@ -1142,12 +1383,6 @@ struct rte_eth_dcb_info { struct rte_eth_dcb_tc_queue_mapping tc_queue; }; -/** - * RX/TX queue states - */ -#define RTE_ETH_QUEUE_STATE_STOPPED 0 -#define RTE_ETH_QUEUE_STATE_STARTED 1 - #define RTE_ETH_ALL RTE_MAX_ETHPORTS /* Macros to check for valid port */ @@ -1235,8 +1470,6 @@ enum rte_eth_dev_state { RTE_ETH_DEV_UNUSED = 0, /** Device is attached when allocated in probing. */ RTE_ETH_DEV_ATTACHED, - /** The deferred state is useless and replaced by ownership. */ - RTE_ETH_DEV_DEFERRED, /** Device is in removed state when plug-out is detected. */ RTE_ETH_DEV_REMOVED, }; @@ -1260,6 +1493,11 @@ struct rte_eth_dev_owner { char name[RTE_ETH_MAX_OWNER_NAME_LEN]; /**< The owner name. */ }; +/** + * Port is released (i.e. totally freed and data erased) on close. + * Temporary flag for PMD migration to new rte_eth_dev_close() behaviour. + */ +#define RTE_ETH_DEV_CLOSE_REMOVE 0x0001 /** Device supports link state interrupt */ #define RTE_ETH_DEV_INTR_LSC 0x0002 /** Device is a bonded slave */ @@ -1309,6 +1547,71 @@ uint16_t rte_eth_find_next(uint16_t port_id); #define RTE_ETH_FOREACH_DEV(p) \ RTE_ETH_FOREACH_DEV_OWNED_BY(p, RTE_ETH_DEV_NO_OWNER) +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Iterates over ethdev ports of a specified device. + * + * @param port_id_start + * The id of the next possible valid port. + * @param parent + * The generic device behind the ports to iterate. + * @return + * Next port id of the device, possibly port_id_start, + * RTE_MAX_ETHPORTS if there is none. + */ +__rte_experimental +uint16_t +rte_eth_find_next_of(uint16_t port_id_start, + const struct rte_device *parent); + +/** + * Macro to iterate over all ethdev ports of a specified device. + * + * @param port_id + * The id of the matching port being iterated. + * @param parent + * The rte_device pointer matching the iterated ports. + */ +#define RTE_ETH_FOREACH_DEV_OF(port_id, parent) \ + for (port_id = rte_eth_find_next_of(0, parent); \ + port_id < RTE_MAX_ETHPORTS; \ + port_id = rte_eth_find_next_of(port_id + 1, parent)) + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Iterates over sibling ethdev ports (i.e. sharing the same rte_device). + * + * @param port_id_start + * The id of the next possible valid sibling port. + * @param ref_port_id + * The id of a reference port to compare rte_device with. + * @return + * Next sibling port id, possibly port_id_start or ref_port_id itself, + * RTE_MAX_ETHPORTS if there is none. + */ +__rte_experimental +uint16_t +rte_eth_find_next_sibling(uint16_t port_id_start, + uint16_t ref_port_id); + +/** + * Macro to iterate over all ethdev ports sharing the same rte_device + * as the specified port. + * Note: the specified reference port is part of the loop iterations. + * + * @param port_id + * The id of the matching port being iterated. + * @param ref_port_id + * The id of the port being compared. + */ +#define RTE_ETH_FOREACH_DEV_SIBLING(port_id, ref_port_id) \ + for (port_id = rte_eth_find_next_sibling(0, ref_port_id); \ + port_id < RTE_MAX_ETHPORTS; \ + port_id = rte_eth_find_next_sibling(port_id + 1, ref_port_id)) /** * @warning @@ -1323,7 +1626,8 @@ uint16_t rte_eth_find_next(uint16_t port_id); * @return * Negative errno value on error, 0 on success. */ -int __rte_experimental rte_eth_dev_owner_new(uint64_t *owner_id); +__rte_experimental +int rte_eth_dev_owner_new(uint64_t *owner_id); /** * @warning @@ -1338,7 +1642,8 @@ int __rte_experimental rte_eth_dev_owner_new(uint64_t *owner_id); * @return * Negative errno value on error, 0 on success. */ -int __rte_experimental rte_eth_dev_owner_set(const uint16_t port_id, +__rte_experimental +int rte_eth_dev_owner_set(const uint16_t port_id, const struct rte_eth_dev_owner *owner); /** @@ -1354,7 +1659,8 @@ int __rte_experimental rte_eth_dev_owner_set(const uint16_t port_id, * @return * 0 on success, negative errno value on error. */ -int __rte_experimental rte_eth_dev_owner_unset(const uint16_t port_id, +__rte_experimental +int rte_eth_dev_owner_unset(const uint16_t port_id, const uint64_t owner_id); /** @@ -1365,8 +1671,11 @@ int __rte_experimental rte_eth_dev_owner_unset(const uint16_t port_id, * * @param owner_id * The owner identifier. + * @return + * 0 on success, negative errno value on error. */ -void __rte_experimental rte_eth_dev_owner_delete(const uint64_t owner_id); +__rte_experimental +int rte_eth_dev_owner_delete(const uint64_t owner_id); /** * @warning @@ -1381,24 +1690,10 @@ void __rte_experimental rte_eth_dev_owner_delete(const uint64_t owner_id); * @return * 0 on success, negative errno value on error.. */ -int __rte_experimental rte_eth_dev_owner_get(const uint16_t port_id, +__rte_experimental +int rte_eth_dev_owner_get(const uint16_t port_id, struct rte_eth_dev_owner *owner); -/** - * Get the total number of Ethernet devices that have been successfully - * initialized by the matching Ethernet driver during the PCI probing phase - * and that are available for applications to use. These devices must be - * accessed by using the ``RTE_ETH_FOREACH_DEV()`` macro to deal with - * non-contiguous ranges of devices. - * These non-contiguous ranges can be created by calls to hotplug functions or - * by some PMDs. - * - * @return - * - The total number of usable Ethernet devices. - */ -__rte_deprecated -uint16_t rte_eth_dev_count(void); - /** * Get the number of ports which are usable for the application. * @@ -1419,38 +1714,7 @@ uint16_t rte_eth_dev_count_avail(void); * @return * The total count of Ethernet devices. */ -uint16_t __rte_experimental rte_eth_dev_count_total(void); - -/** - * Attach a new Ethernet device specified by arguments. - * - * @param devargs - * A pointer to a strings array describing the new device - * to be attached. The strings should be a pci address like - * '0000:01:00.0' or virtual device name like 'net_pcap0'. - * @param port_id - * A pointer to a port identifier actually attached. - * @return - * 0 on success and port_id is filled, negative on error - */ -__rte_deprecated -int rte_eth_dev_attach(const char *devargs, uint16_t *port_id); - -/** - * Detach a Ethernet device specified by port identifier. - * This function must be called when the device is in the - * closed state. - * - * @param port_id - * The port identifier of the device to detach. - * @param devname - * A pointer to a buffer that will be filled with the device name. - * This buffer must be at least RTE_DEV_NAME_MAX_LEN long. - * @return - * 0 on success and devname is filled, negative on error - */ -__rte_deprecated -int rte_eth_dev_detach(uint16_t port_id, char *devname); +uint16_t rte_eth_dev_count_total(void); /** * Convert a numerical speed in Mbps to a bitmap flag that can be used in @@ -1466,9 +1730,6 @@ int rte_eth_dev_detach(uint16_t port_id, char *devname); uint32_t rte_eth_speed_bitflag(uint32_t speed, int duplex); /** - * @warning - * @b EXPERIMENTAL: this API may change without prior notice - * * Get DEV_RX_OFFLOAD_* flag name. * * @param offload @@ -1476,12 +1737,9 @@ uint32_t rte_eth_speed_bitflag(uint32_t speed, int duplex); * @return * Offload name or 'UNKNOWN' if the flag cannot be recognised. */ -const char * __rte_experimental rte_eth_dev_rx_offload_name(uint64_t offload); +const char *rte_eth_dev_rx_offload_name(uint64_t offload); /** - * @warning - * @b EXPERIMENTAL: this API may change without prior notice - * * Get DEV_TX_OFFLOAD_* flag name. * * @param offload @@ -1489,7 +1747,7 @@ const char * __rte_experimental rte_eth_dev_rx_offload_name(uint64_t offload); * @return * Offload name or 'UNKNOWN' if the flag cannot be recognised. */ -const char * __rte_experimental rte_eth_dev_tx_offload_name(uint64_t offload); +const char *rte_eth_dev_tx_offload_name(uint64_t offload); /** * Configure an Ethernet device. @@ -1514,14 +1772,14 @@ const char * __rte_experimental rte_eth_dev_tx_offload_name(uint64_t offload); * Applications should set the ignore_bitfield_offloads bit on *rxmode* * structure and use offloads field to set per-port offloads instead. * - Any offloading set in eth_conf->[rt]xmode.offloads must be within - * the [rt]x_offload_capa returned from rte_eth_dev_infos_get(). + * the [rt]x_offload_capa returned from rte_eth_dev_info_get(). * Any type of device supported offloading set in the input argument * eth_conf->[rt]xmode.offloads to rte_eth_dev_configure() is enabled * on all queues and it can't be disabled in rte_eth_[rt]x_queue_setup() * - the Receive Side Scaling (RSS) configuration when using multiple RX * queues per port. Any RSS hash function set in eth_conf->rss_conf.rss_hf * must be within the flow_type_rss_offloads provided by drivers via - * rte_eth_dev_infos_get() API. + * rte_eth_dev_info_get() API. * * Embedding all configuration information in a single data structure * is the more flexible method that allows the addition of new features @@ -1544,7 +1802,8 @@ int rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_queue, * @return * 1 when the Ethernet device is removed, otherwise 0. */ -int __rte_experimental +__rte_experimental +int rte_eth_dev_is_removed(uint16_t port_id); /** @@ -1589,9 +1848,9 @@ rte_eth_dev_is_removed(uint16_t port_id); * @return * - 0: Success, receive queue correctly set up. * - -EIO: if device is removed. - * - -EINVAL: The size of network buffers which can be allocated from the - * memory pool does not fit the various buffer sizes allowed by the - * device controller. + * - -EINVAL: The memory pool pointer is null or the size of network buffers + * which can be allocated from this memory pool does not fit the various + * buffer sizes allowed by the device controller. * - -ENOMEM: Unable to allocate the receive ring descriptors or to * allocate network memory buffers from the memory pool when * initializing receive descriptors. @@ -1601,6 +1860,37 @@ int rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id, const struct rte_eth_rxconf *rx_conf, struct rte_mempool *mb_pool); +/** + * @warning + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice + * + * Allocate and set up a hairpin receive queue for an Ethernet device. + * + * The function set up the selected queue to be used in hairpin. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param rx_queue_id + * The index of the receive queue to set up. + * The value must be in the range [0, nb_rx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param nb_rx_desc + * The number of receive descriptors to allocate for the receive ring. + * 0 means the PMD will use default value. + * @param conf + * The pointer to the hairpin configuration. + * + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + * - (-ENOMEM) if unable to allocate the resources. + */ +__rte_experimental +int rte_eth_rx_hairpin_queue_setup + (uint16_t port_id, uint16_t rx_queue_id, uint16_t nb_rx_desc, + const struct rte_eth_hairpin_conf *conf); + /** * Allocate and set up a transmit queue for an Ethernet device. * @@ -1653,6 +1943,35 @@ int rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id, uint16_t nb_tx_desc, unsigned int socket_id, const struct rte_eth_txconf *tx_conf); +/** + * @warning + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice + * + * Allocate and set up a transmit hairpin queue for an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param tx_queue_id + * The index of the transmit queue to set up. + * The value must be in the range [0, nb_tx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param nb_tx_desc + * The number of transmit descriptors to allocate for the transmit ring. + * 0 to set default PMD value. + * @param conf + * The hairpin configuration. + * + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + * - (-ENOMEM) if unable to allocate the resources. + */ +__rte_experimental +int rte_eth_tx_hairpin_queue_setup + (uint16_t port_id, uint16_t tx_queue_id, uint16_t nb_tx_desc, + const struct rte_eth_hairpin_conf *conf); + /** * Return the NUMA socket to which an Ethernet device is connected * @@ -1688,7 +2007,7 @@ int rte_eth_dev_is_valid_port(uint16_t port_id); * to rte_eth_dev_configure(). * @return * - 0: Success, the receive queue is started. - * - -EINVAL: The port_id or the queue_id out of range. + * - -EINVAL: The port_id or the queue_id out of range or belong to hairpin. * - -EIO: if device is removed. * - -ENOTSUP: The function not supported in PMD driver. */ @@ -1705,7 +2024,7 @@ int rte_eth_dev_rx_queue_start(uint16_t port_id, uint16_t rx_queue_id); * to rte_eth_dev_configure(). * @return * - 0: Success, the receive queue is stopped. - * - -EINVAL: The port_id or the queue_id out of range. + * - -EINVAL: The port_id or the queue_id out of range or belong to hairpin. * - -EIO: if device is removed. * - -ENOTSUP: The function not supported in PMD driver. */ @@ -1723,7 +2042,7 @@ int rte_eth_dev_rx_queue_stop(uint16_t port_id, uint16_t rx_queue_id); * to rte_eth_dev_configure(). * @return * - 0: Success, the transmit queue is started. - * - -EINVAL: The port_id or the queue_id out of range. + * - -EINVAL: The port_id or the queue_id out of range or belong to hairpin. * - -EIO: if device is removed. * - -ENOTSUP: The function not supported in PMD driver. */ @@ -1740,7 +2059,7 @@ int rte_eth_dev_tx_queue_start(uint16_t port_id, uint16_t tx_queue_id); * to rte_eth_dev_configure(). * @return * - 0: Success, the transmit queue is stopped. - * - -EINVAL: The port_id or the queue_id out of range. + * - -EINVAL: The port_id or the queue_id out of range or belong to hairpin. * - -EIO: if device is removed. * - -ENOTSUP: The function not supported in PMD driver. */ @@ -1803,8 +2122,8 @@ int rte_eth_dev_set_link_down(uint16_t port_id); /** * Close a stopped Ethernet device. The device cannot be restarted! - * The function frees all resources except for needed by the - * closed state. To free these resources, call rte_eth_dev_detach(). + * The function frees all port resources if the driver supports + * the flag RTE_ETH_DEV_CLOSE_REMOVE. * * @param port_id * The port identifier of the Ethernet device. @@ -1855,16 +2174,26 @@ int rte_eth_dev_reset(uint16_t port_id); * * @param port_id * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if support for promiscuous_enable() does not exist + * for the device. + * - (-ENODEV) if *port_id* invalid. */ -void rte_eth_promiscuous_enable(uint16_t port_id); +int rte_eth_promiscuous_enable(uint16_t port_id); /** * Disable receipt in promiscuous mode for an Ethernet device. * * @param port_id * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if support for promiscuous_disable() does not exist + * for the device. + * - (-ENODEV) if *port_id* invalid. */ -void rte_eth_promiscuous_disable(uint16_t port_id); +int rte_eth_promiscuous_disable(uint16_t port_id); /** * Return the value of promiscuous mode for an Ethernet device. @@ -1883,16 +2212,26 @@ int rte_eth_promiscuous_get(uint16_t port_id); * * @param port_id * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if support for allmulticast_enable() does not exist + * for the device. + * - (-ENODEV) if *port_id* invalid. */ -void rte_eth_allmulticast_enable(uint16_t port_id); +int rte_eth_allmulticast_enable(uint16_t port_id); /** * Disable the receipt of all multicast frames by an Ethernet device. * * @param port_id * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if support for allmulticast_disable() does not exist + * for the device. + * - (-ENODEV) if *port_id* invalid. */ -void rte_eth_allmulticast_disable(uint16_t port_id); +int rte_eth_allmulticast_disable(uint16_t port_id); /** * Return the value of allmulticast mode for an Ethernet device. @@ -1916,8 +2255,12 @@ int rte_eth_allmulticast_get(uint16_t port_id); * @param link * A pointer to an *rte_eth_link* structure to be filled with * the status, the speed and the mode of the Ethernet device link. + * @return + * - (0) if successful. + * - (-ENOTSUP) if the function is not supported in PMD driver. + * - (-ENODEV) if *port_id* invalid. */ -void rte_eth_link_get(uint16_t port_id, struct rte_eth_link *link); +int rte_eth_link_get(uint16_t port_id, struct rte_eth_link *link); /** * Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX @@ -1929,8 +2272,12 @@ void rte_eth_link_get(uint16_t port_id, struct rte_eth_link *link); * @param link * A pointer to an *rte_eth_link* structure to be filled with * the status, the speed and the mode of the Ethernet device link. + * @return + * - (0) if successful. + * - (-ENOTSUP) if the function is not supported in PMD driver. + * - (-ENODEV) if *port_id* invalid. */ -void rte_eth_link_get_nowait(uint16_t port_id, struct rte_eth_link *link); +int rte_eth_link_get_nowait(uint16_t port_id, struct rte_eth_link *link); /** * Retrieve the general I/O statistics of an Ethernet device. @@ -1960,6 +2307,7 @@ int rte_eth_stats_get(uint16_t port_id, struct rte_eth_stats *stats); * - (0) if device notified to reset stats. * - (-ENOTSUP) if hardware doesn't support. * - (-ENODEV) if *port_id* invalid. + * - (<0): Error code of the driver stats reset function. */ int rte_eth_stats_reset(uint16_t port_id); @@ -2064,7 +2412,7 @@ rte_eth_xstats_get_names_by_id(uint16_t port_id, * A pointer to an ids array passed by application. This tells which * statistics values function should retrieve. This parameter * can be set to NULL if size is 0. In this case function will retrieve - * all avalible statistics. + * all available statistics. * @param values * A pointer to a table to be filled with device statistics values. * @param size @@ -2107,8 +2455,14 @@ int rte_eth_xstats_get_id_by_name(uint16_t port_id, const char *xstat_name, * * @param port_id * The port identifier of the Ethernet device. + * @return + * - (0) if device notified to reset extended stats. + * - (-ENOTSUP) if pmd doesn't support both + * extended stats and basic stats reset. + * - (-ENODEV) if *port_id* invalid. + * - (<0): Error code of the driver xstats reset function. */ -void rte_eth_xstats_reset(uint16_t port_id); +int rte_eth_xstats_reset(uint16_t port_id); /** * Set a mapping for the specified transmit queue to the specified per-queue @@ -2159,19 +2513,55 @@ int rte_eth_dev_set_rx_queue_stats_mapping(uint16_t port_id, * @param mac_addr * A pointer to a structure of type *ether_addr* to be filled with * the Ethernet address of the Ethernet device. + * @return + * - (0) if successful + * - (-ENODEV) if *port_id* invalid. */ -void rte_eth_macaddr_get(uint16_t port_id, struct ether_addr *mac_addr); +int rte_eth_macaddr_get(uint16_t port_id, struct rte_ether_addr *mac_addr); /** * Retrieve the contextual information of an Ethernet device. * + * As part of this function, a number of of fields in dev_info will be + * initialized as follows: + * + * rx_desc_lim = lim + * tx_desc_lim = lim + * + * Where lim is defined within the rte_eth_dev_info_get as + * + * const struct rte_eth_desc_lim lim = { + * .nb_max = UINT16_MAX, + * .nb_min = 0, + * .nb_align = 1, + * .nb_seg_max = UINT16_MAX, + * .nb_mtu_seg_max = UINT16_MAX, + * }; + * + * device = dev->device + * min_mtu = RTE_ETHER_MIN_MTU + * max_mtu = UINT16_MAX + * + * The following fields will be populated if support for dev_infos_get() + * exists for the device and the rte_eth_dev 'dev' has been populated + * successfully with a call to it: + * + * driver_name = dev->device->driver->name + * nb_rx_queues = dev->data->nb_rx_queues + * nb_tx_queues = dev->data->nb_tx_queues + * dev_flags = &dev->data->dev_flags + * * @param port_id * The port identifier of the Ethernet device. * @param dev_info * A pointer to a structure of type *rte_eth_dev_info* to be filled with * the contextual information of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if support for dev_infos_get() does not exist for the device. + * - (-ENODEV) if *port_id* invalid. */ -void rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info); +int rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info); /** * Retrieve the firmware version of a device. @@ -2235,6 +2625,42 @@ int rte_eth_dev_fw_version_get(uint16_t port_id, */ int rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t ptype_mask, uint32_t *ptypes, int num); +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Inform Ethernet device about reduced range of packet types to handle. + * + * Application can use this function to set only specific ptypes that it's + * interested. This information can be used by the PMD to optimize Rx path. + * + * The function accepts an array `set_ptypes` allocated by the caller to + * store the packet types set by the driver, the last element of the array + * is set to RTE_PTYPE_UNKNOWN. The size of the `set_ptype` array should be + * `rte_eth_dev_get_supported_ptypes() + 1` else it might only be filled + * partially. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param ptype_mask + * The ptype family that application is interested in should be bitwise OR of + * RTE_PTYPE_*_MASK or 0. + * @param set_ptypes + * An array pointer to store set packet types, allocated by caller. The + * function marks the end of array with RTE_PTYPE_UNKNOWN. + * @param num + * Size of the array pointed by param ptypes. + * Should be rte_eth_dev_get_supported_ptypes() + 1 to accommodate the + * set ptypes. + * @return + * - (0) if Success. + * - (-ENODEV) if *port_id* invalid. + * - (-EINVAL) if *ptype_mask* is invalid (or) set_ptypes is NULL and + * num > 0. + */ +__rte_experimental +int rte_eth_dev_set_ptypes(uint16_t port_id, uint32_t ptype_mask, + uint32_t *set_ptypes, unsigned int num); /** * Retrieve the MTU of an Ethernet device. @@ -2261,7 +2687,9 @@ int rte_eth_dev_get_mtu(uint16_t port_id, uint16_t *mtu); * - (-ENOTSUP) if operation is not supported. * - (-ENODEV) if *port_id* invalid. * - (-EIO) if device is removed. - * - (-EINVAL) if *mtu* invalid. + * - (-EINVAL) if *mtu* invalid, validation of mtu can occur within + * rte_eth_dev_set_mtu if dev_infos_get is supported by the device or + * when the mtu is set using dev->dev_ops->mtu_set. * - (-EBUSY) if operation is not allowed when the port is running */ int rte_eth_dev_set_mtu(uint16_t port_id, uint16_t mtu); @@ -2279,7 +2707,7 @@ int rte_eth_dev_set_mtu(uint16_t port_id, uint16_t mtu); * Otherwise, disable VLAN filtering of VLAN packets tagged with *vlan_id*. * @return * - (0) if successful. - * - (-ENOSUP) if hardware-assisted VLAN filtering not configured. + * - (-ENOTSUP) if hardware-assisted VLAN filtering not configured. * - (-ENODEV) if *port_id* invalid. * - (-EIO) if device is removed. * - (-ENOSYS) if VLAN filtering on *port_id* disabled. @@ -2302,7 +2730,7 @@ int rte_eth_dev_vlan_filter(uint16_t port_id, uint16_t vlan_id, int on); * If 0, Disable VLAN Stripping of the receive queue of the Ethernet port. * @return * - (0) if successful. - * - (-ENOSUP) if hardware-assisted VLAN stripping not configured. + * - (-ENOTSUP) if hardware-assisted VLAN stripping not configured. * - (-ENODEV) if *port_id* invalid. * - (-EINVAL) if *rx_queue_id* invalid. */ @@ -2322,7 +2750,7 @@ int rte_eth_dev_set_vlan_strip_on_queue(uint16_t port_id, uint16_t rx_queue_id, * The Tag Protocol ID * @return * - (0) if successful. - * - (-ENOSUP) if hardware-assisted VLAN TPID setup is not supported. + * - (-ENOTSUP) if hardware-assisted VLAN TPID setup is not supported. * - (-ENODEV) if *port_id* invalid. * - (-EIO) if device is removed. */ @@ -2345,9 +2773,10 @@ int rte_eth_dev_set_vlan_ether_type(uint16_t port_id, * ETH_VLAN_STRIP_OFFLOAD * ETH_VLAN_FILTER_OFFLOAD * ETH_VLAN_EXTEND_OFFLOAD + * ETH_QINQ_STRIP_OFFLOAD * @return * - (0) if successful. - * - (-ENOSUP) if hardware-assisted VLAN filtering not configured. + * - (-ENOTSUP) if hardware-assisted VLAN filtering not configured. * - (-ENODEV) if *port_id* invalid. * - (-EIO) if device is removed. */ @@ -2363,6 +2792,7 @@ int rte_eth_dev_set_vlan_offload(uint16_t port_id, int offload_mask); * ETH_VLAN_STRIP_OFFLOAD * ETH_VLAN_FILTER_OFFLOAD * ETH_VLAN_EXTEND_OFFLOAD + * ETH_QINQ_STRIP_OFFLOAD * - (-ENODEV) if *port_id* invalid. */ int rte_eth_dev_get_vlan_offload(uint16_t port_id); @@ -2505,7 +2935,7 @@ rte_eth_tx_buffer_count_callback(struct rte_mbuf **pkts, uint16_t unsent, /** * Request the driver to free mbufs currently cached by the driver. The * driver will only free the mbuf if it is no longer in use. It is the - * application's responsibity to ensure rte_eth_tx_buffer_flush(..) is + * application's responsibility to ensure rte_eth_tx_buffer_flush(..) is * called if needed. * * @param port_id @@ -2724,6 +3154,27 @@ int rte_eth_dev_rx_intr_ctl(uint16_t port_id, int epfd, int op, void *data); int rte_eth_dev_rx_intr_ctl_q(uint16_t port_id, uint16_t queue_id, int epfd, int op, void *data); +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Get interrupt fd per Rx queue. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The index of the receive queue from which to retrieve input packets. + * The value must be in the range [0, nb_rx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @return + * - (>=0) the interrupt fd associated to the requested Rx queue if + * successful. + * - (-1) on error. + */ +__rte_experimental +int +rte_eth_dev_rx_intr_ctl_q_get_fd(uint16_t port_id, uint16_t queue_id); + /** * Turn on the LED on the Ethernet device. * This function turns on the LED on the Ethernet device. @@ -2824,7 +3275,7 @@ int rte_eth_dev_priority_flow_ctrl_set(uint16_t port_id, * - (-ENOSPC) if no more MAC addresses can be added. * - (-EINVAL) if MAC address is invalid. */ -int rte_eth_dev_mac_addr_add(uint16_t port_id, struct ether_addr *mac_addr, +int rte_eth_dev_mac_addr_add(uint16_t port_id, struct rte_ether_addr *mac_addr, uint32_t pool); /** @@ -2840,7 +3291,8 @@ int rte_eth_dev_mac_addr_add(uint16_t port_id, struct ether_addr *mac_addr, * - (-ENODEV) if *port* invalid. * - (-EADDRINUSE) if attempting to remove the default MAC address */ -int rte_eth_dev_mac_addr_remove(uint16_t port_id, struct ether_addr *mac_addr); +int rte_eth_dev_mac_addr_remove(uint16_t port_id, + struct rte_ether_addr *mac_addr); /** * Set the default MAC address. @@ -2856,7 +3308,7 @@ int rte_eth_dev_mac_addr_remove(uint16_t port_id, struct ether_addr *mac_addr); * - (-EINVAL) if MAC address is invalid. */ int rte_eth_dev_default_mac_addr_set(uint16_t port_id, - struct ether_addr *mac_addr); + struct rte_ether_addr *mac_addr); /** * Update Redirection Table(RETA) of Receive Side Scaling of Ethernet device. @@ -2884,7 +3336,8 @@ int rte_eth_dev_rss_reta_update(uint16_t port_id, * @param port_id * The port identifier of the Ethernet device. * @param reta_conf - * RETA to query. + * RETA to query. For each requested reta entry, corresponding bit + * in mask must be set. * @param reta_size * Redirection table size. The table size can be queried by * rte_eth_dev_info_get(). @@ -2917,7 +3370,7 @@ int rte_eth_dev_rss_reta_query(uint16_t port_id, * - (-EIO) if device is removed. * - (-EINVAL) if bad parameter. */ -int rte_eth_dev_uc_hash_table_set(uint16_t port_id, struct ether_addr *addr, +int rte_eth_dev_uc_hash_table_set(uint16_t port_id, struct rte_ether_addr *addr, uint8_t on); /** @@ -3097,6 +3550,7 @@ rte_eth_dev_udp_tunnel_port_delete(uint16_t port_id, * - (-ENODEV) if *port_id* invalid. * - (-EIO) if device is removed. */ +__rte_deprecated int rte_eth_dev_filter_supported(uint16_t port_id, enum rte_filter_type filter_type); @@ -3119,6 +3573,7 @@ int rte_eth_dev_filter_supported(uint16_t port_id, * - (-EIO) if device is removed. * - others depends on the specific operations implementation. */ +__rte_deprecated int rte_eth_dev_filter_ctrl(uint16_t port_id, enum rte_filter_type filter_type, enum rte_filter_op filter_op, void *arg); @@ -3306,7 +3761,8 @@ int rte_eth_remove_tx_callback(uint16_t port_id, uint16_t queue_id, * @return * - 0: Success * - -ENOTSUP: routine is not supported by the device PMD. - * - -EINVAL: The port_id or the queue_id is out of range. + * - -EINVAL: The port_id or the queue_id is out of range, or the queue + * is hairpin queue. */ int rte_eth_rx_queue_info_get(uint16_t port_id, uint16_t queue_id, struct rte_eth_rxq_info *qinfo); @@ -3326,11 +3782,54 @@ int rte_eth_rx_queue_info_get(uint16_t port_id, uint16_t queue_id, * @return * - 0: Success * - -ENOTSUP: routine is not supported by the device PMD. - * - -EINVAL: The port_id or the queue_id is out of range. + * - -EINVAL: The port_id or the queue_id is out of range, or the queue + * is hairpin queue. */ int rte_eth_tx_queue_info_get(uint16_t port_id, uint16_t queue_id, struct rte_eth_txq_info *qinfo); +/** + * Retrieve information about the Rx packet burst mode. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The Rx queue on the Ethernet device for which information + * will be retrieved. + * @param mode + * A pointer to a structure of type *rte_eth_burst_mode* to be filled + * with the information of the packet burst mode. + * + * @return + * - 0: Success + * - -ENOTSUP: routine is not supported by the device PMD. + * - -EINVAL: The port_id or the queue_id is out of range. + */ +__rte_experimental +int rte_eth_rx_burst_mode_get(uint16_t port_id, uint16_t queue_id, + struct rte_eth_burst_mode *mode); + +/** + * Retrieve information about the Tx packet burst mode. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The Tx queue on the Ethernet device for which information + * will be retrieved. + * @param mode + * A pointer to a structure of type *rte_eth_burst_mode* to be filled + * with the information of the packet burst mode. + * + * @return + * - 0: Success + * - -ENOTSUP: routine is not supported by the device PMD. + * - -EINVAL: The port_id or the queue_id is out of range. + */ +__rte_experimental +int rte_eth_tx_burst_mode_get(uint16_t port_id, uint16_t queue_id, + struct rte_eth_burst_mode *mode); + /** * Retrieve device registers and register attributes (number of registers and * register size) @@ -3415,7 +3914,8 @@ int rte_eth_dev_set_eeprom(uint16_t port_id, struct rte_dev_eeprom_info *info); * - (-EIO) if device is removed. * - others depends on the specific operations implementation. */ -int __rte_experimental +__rte_experimental +int rte_eth_dev_get_module_info(uint16_t port_id, struct rte_eth_dev_module_info *modinfo); @@ -3437,7 +3937,8 @@ rte_eth_dev_get_module_info(uint16_t port_id, * - (-EIO) if device is removed. * - others depends on the specific operations implementation. */ -int __rte_experimental +__rte_experimental +int rte_eth_dev_get_module_eeprom(uint16_t port_id, struct rte_dev_eeprom_info *info); @@ -3460,7 +3961,7 @@ rte_eth_dev_get_module_eeprom(uint16_t port_id, * - (-ENOSPC) if *port_id* has not enough multicast filtering resources. */ int rte_eth_dev_set_mc_addr_list(uint16_t port_id, - struct ether_addr *mc_addr_set, + struct rte_ether_addr *mc_addr_set, uint32_t nb_mc_addr); /** @@ -3585,6 +4086,54 @@ int rte_eth_timesync_read_time(uint16_t port_id, struct timespec *time); */ int rte_eth_timesync_write_time(uint16_t port_id, const struct timespec *time); +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Read the current clock counter of an Ethernet device + * + * This returns the current raw clock value of an Ethernet device. It is + * a raw amount of ticks, with no given time reference. + * The value returned here is from the same clock than the one + * filling timestamp field of Rx packets when using hardware timestamp + * offload. Therefore it can be used to compute a precise conversion of + * the device clock to the real time. + * + * E.g, a simple heuristic to derivate the frequency would be: + * uint64_t start, end; + * rte_eth_read_clock(port, start); + * rte_delay_ms(100); + * rte_eth_read_clock(port, end); + * double freq = (end - start) * 10; + * + * Compute a common reference with: + * uint64_t base_time_sec = current_time(); + * uint64_t base_clock; + * rte_eth_read_clock(port, base_clock); + * + * Then, convert the raw mbuf timestamp with: + * base_time_sec + (double)(mbuf->timestamp - base_clock) / freq; + * + * This simple example will not provide a very good accuracy. One must + * at least measure multiple times the frequency and do a regression. + * To avoid deviation from the system time, the common reference can + * be repeated from time to time. The integer division can also be + * converted by a multiplication and a shift for better performance. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param clock + * Pointer to the uint64_t that holds the raw clock value. + * + * @return + * - 0: Success. + * - -ENODEV: The port ID is invalid. + * - -ENOTSUP: The function is not supported by the Ethernet driver. + */ +__rte_experimental +int +rte_eth_read_clock(uint16_t port_id, uint64_t *clock); + /** * Config l2 tunnel ether type of an Ethernet device for filtering specific * tunnel packets by ether type. @@ -3718,6 +4267,23 @@ rte_eth_dev_pool_ops_supported(uint16_t port_id, const char *pool); void * rte_eth_dev_get_sec_ctx(uint16_t port_id); +/** + * @warning + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice + * + * Query the device hairpin capabilities. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param cap + * Pointer to a structure that will hold the hairpin capabilities. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + */ +__rte_experimental +int rte_eth_dev_hairpin_capability_get(uint16_t port_id, + struct rte_eth_hairpin_cap *cap); #include @@ -3835,6 +4401,7 @@ rte_eth_rx_burst(uint16_t port_id, uint16_t queue_id, } #endif + rte_ethdev_trace_rx_burst(port_id, queue_id, (void **)rx_pkts, nb_rx); return nb_rx; } @@ -4098,13 +4665,12 @@ rte_eth_tx_burst(uint16_t port_id, uint16_t queue_id, } #endif + rte_ethdev_trace_tx_burst(port_id, queue_id, (void **)tx_pkts, + nb_pkts); return (*dev->tx_pkt_burst)(dev->data->tx_queues[queue_id], tx_pkts, nb_pkts); } /** - * @warning - * @b EXPERIMENTAL: this API may change without prior notice - * * Process a burst of output packets on a transmit queue of an Ethernet device. * * The rte_eth_tx_prepare() function is invoked to prepare output packets to be @@ -4152,8 +4718,8 @@ rte_eth_tx_burst(uint16_t port_id, uint16_t queue_id, * The number of packets correct and ready to be sent. The return value can be * less than the value of the *tx_pkts* parameter when some packet doesn't * meet devices requirements with rte_errno set appropriately: - * - -EINVAL: offload flags are not correctly set - * - -ENOTSUP: the offload feature is not supported by the hardware + * - EINVAL: offload flags are not correctly set + * - ENOTSUP: the offload feature is not supported by the hardware * */ @@ -4168,7 +4734,7 @@ rte_eth_tx_prepare(uint16_t port_id, uint16_t queue_id, #ifdef RTE_LIBRTE_ETHDEV_DEBUG if (!rte_eth_dev_is_valid_port(port_id)) { RTE_ETHDEV_LOG(ERR, "Invalid TX port_id=%u\n", port_id); - rte_errno = -EINVAL; + rte_errno = EINVAL; return 0; } #endif @@ -4178,7 +4744,7 @@ rte_eth_tx_prepare(uint16_t port_id, uint16_t queue_id, #ifdef RTE_LIBRTE_ETHDEV_DEBUG if (queue_id >= dev->data->nb_tx_queues) { RTE_ETHDEV_LOG(ERR, "Invalid TX queue_id=%u\n", queue_id); - rte_errno = -EINVAL; + rte_errno = EINVAL; return 0; } #endif