X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=lib%2Flibrte_mbuf%2Frte_mbuf.h;h=06eceba374a9b4a8c33a01dbaa53078b551fae94;hb=d27a6261875d203424e93d7316a0e92852f367b5;hp=e39ad28da853544fbf9d8d19cb86473c2d9cc94e;hpb=d6b324c00fc933f757e68c54c0e50c92826d83f0;p=dpdk.git diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h index e39ad28da8..06eceba374 100644 --- a/lib/librte_mbuf/rte_mbuf.h +++ b/lib/librte_mbuf/rte_mbuf.h @@ -1,35 +1,6 @@ -/*- - * BSD LICENSE - * - * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. - * Copyright 2014 6WIND S.A. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2010-2014 Intel Corporation. + * Copyright 2014 6WIND S.A. */ #ifndef _RTE_MBUF_H_ @@ -44,7 +15,14 @@ * buffers. The message buffers are stored in a mempool, using the * RTE mempool library. * - * This library provide an API to allocate/free packet mbufs, which are + * The preferred way to create a mbuf pool is to use + * rte_pktmbuf_pool_create(). However, in some situations, an + * application may want to have more control (ex: populate the pool with + * specific memory), in this case it is possible to use functions from + * rte_mempool. See how rte_pktmbuf_pool_create() is implemented for + * details. + * + * This library provides an API to allocate/free packet mbufs, which are * used to carry network packets. * * To understand the concepts of packet buffers or mbufs, you @@ -54,21 +32,20 @@ */ #include +#include #include +#include #include #include #include #include #include +#include #ifdef __cplusplus extern "C" { #endif -/* deprecated options */ -#pragma GCC poison RTE_MBUF_SCATTER_GATHER -#pragma GCC poison RTE_MBUF_REFCNT - /* * Packet Offload Features Flags. It also carry packet type information. * Critical resources. Both rx/tx shared these bits. Be cautious on any change @@ -83,29 +60,165 @@ extern "C" { * Keep these flags synchronized with rte_get_rx_ol_flag_name() and * rte_get_tx_ol_flag_name(). */ -#define PKT_RX_VLAN_PKT (1ULL << 0) /**< RX packet is a 802.1q VLAN packet. */ + +/** + * The RX packet is a 802.1q VLAN packet, and the tci has been + * saved in in mbuf->vlan_tci. + * If the flag PKT_RX_VLAN_STRIPPED is also present, the VLAN + * header has been stripped from mbuf data, else it is still + * present. + */ +#define PKT_RX_VLAN (1ULL << 0) + #define PKT_RX_RSS_HASH (1ULL << 1) /**< RX packet with RSS hash result. */ #define PKT_RX_FDIR (1ULL << 2) /**< RX packet with FDIR match indicate. */ -#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) /**< L4 cksum of RX pkt. is not OK. */ -#define PKT_RX_IP_CKSUM_BAD (1ULL << 4) /**< IP cksum of RX pkt. is not OK. */ -#define PKT_RX_EIP_CKSUM_BAD (0ULL << 0) /**< External IP header checksum error. */ -#define PKT_RX_OVERSIZE (0ULL << 0) /**< Num of desc of an RX pkt oversize. */ -#define PKT_RX_HBUF_OVERFLOW (0ULL << 0) /**< Header buffer overflow. */ -#define PKT_RX_RECIP_ERR (0ULL << 0) /**< Hardware processing error. */ -#define PKT_RX_MAC_ERR (0ULL << 0) /**< MAC error. */ + +/** + * Deprecated. + * Checking this flag alone is deprecated: check the 2 bits of + * PKT_RX_L4_CKSUM_MASK. + * This flag was set when the L4 checksum of a packet was detected as + * wrong by the hardware. + */ +#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) + +/** + * Deprecated. + * Checking this flag alone is deprecated: check the 2 bits of + * PKT_RX_IP_CKSUM_MASK. + * This flag was set when the IP checksum of a packet was detected as + * wrong by the hardware. + */ +#define PKT_RX_IP_CKSUM_BAD (1ULL << 4) + +#define PKT_RX_EIP_CKSUM_BAD (1ULL << 5) /**< External IP header checksum error. */ + +/** + * A vlan has been stripped by the hardware and its tci is saved in + * mbuf->vlan_tci. This can only happen if vlan stripping is enabled + * in the RX configuration of the PMD. + * When PKT_RX_VLAN_STRIPPED is set, PKT_RX_VLAN must also be set. + */ +#define PKT_RX_VLAN_STRIPPED (1ULL << 6) + +/** + * Mask of bits used to determine the status of RX IP checksum. + * - PKT_RX_IP_CKSUM_UNKNOWN: no information about the RX IP checksum + * - PKT_RX_IP_CKSUM_BAD: the IP checksum in the packet is wrong + * - PKT_RX_IP_CKSUM_GOOD: the IP checksum in the packet is valid + * - PKT_RX_IP_CKSUM_NONE: the IP checksum is not correct in the packet + * data, but the integrity of the IP header is verified. + */ +#define PKT_RX_IP_CKSUM_MASK ((1ULL << 4) | (1ULL << 7)) + +#define PKT_RX_IP_CKSUM_UNKNOWN 0 +#define PKT_RX_IP_CKSUM_BAD (1ULL << 4) +#define PKT_RX_IP_CKSUM_GOOD (1ULL << 7) +#define PKT_RX_IP_CKSUM_NONE ((1ULL << 4) | (1ULL << 7)) + +/** + * Mask of bits used to determine the status of RX L4 checksum. + * - PKT_RX_L4_CKSUM_UNKNOWN: no information about the RX L4 checksum + * - PKT_RX_L4_CKSUM_BAD: the L4 checksum in the packet is wrong + * - PKT_RX_L4_CKSUM_GOOD: the L4 checksum in the packet is valid + * - PKT_RX_L4_CKSUM_NONE: the L4 checksum is not correct in the packet + * data, but the integrity of the L4 data is verified. + */ +#define PKT_RX_L4_CKSUM_MASK ((1ULL << 3) | (1ULL << 8)) + +#define PKT_RX_L4_CKSUM_UNKNOWN 0 +#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) +#define PKT_RX_L4_CKSUM_GOOD (1ULL << 8) +#define PKT_RX_L4_CKSUM_NONE ((1ULL << 3) | (1ULL << 8)) + #define PKT_RX_IEEE1588_PTP (1ULL << 9) /**< RX IEEE1588 L2 Ethernet PT Packet. */ #define PKT_RX_IEEE1588_TMST (1ULL << 10) /**< RX IEEE1588 L2/L4 timestamped packet.*/ #define PKT_RX_FDIR_ID (1ULL << 13) /**< FD id reported if FDIR match. */ #define PKT_RX_FDIR_FLX (1ULL << 14) /**< Flexible bytes reported if FDIR match. */ -#define PKT_RX_QINQ_PKT (1ULL << 15) /**< RX packet with double VLAN stripped. */ + +/** + * The 2 vlans have been stripped by the hardware and their tci are + * saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer). + * This can only happen if vlan stripping is enabled in the RX + * configuration of the PMD. If this flag is set, + * When PKT_RX_QINQ_STRIPPED is set, the flags (PKT_RX_VLAN | + * PKT_RX_VLAN_STRIPPED | PKT_RX_QINQ) must also be set. + */ +#define PKT_RX_QINQ_STRIPPED (1ULL << 15) + +/** + * When packets are coalesced by a hardware or virtual driver, this flag + * can be set in the RX mbuf, meaning that the m->tso_segsz field is + * valid and is set to the segment size of original packets. + */ +#define PKT_RX_LRO (1ULL << 16) + +/** + * Indicate that the timestamp field in the mbuf is valid. + */ +#define PKT_RX_TIMESTAMP (1ULL << 17) + +/** + * Indicate that security offload processing was applied on the RX packet. + */ +#define PKT_RX_SEC_OFFLOAD (1ULL << 18) + +/** + * Indicate that security offload processing failed on the RX packet. + */ +#define PKT_RX_SEC_OFFLOAD_FAILED (1ULL << 19) + +/** + * The RX packet is a double VLAN, and the outer tci has been + * saved in in mbuf->vlan_tci_outer. + * If the flag PKT_RX_QINQ_STRIPPED is also present, both VLANs + * headers have been stripped from mbuf data, else they are still + * present. + */ +#define PKT_RX_QINQ (1ULL << 20) + /* add new RX flags here */ /* add new TX flags here */ +/** + * UDP Fragmentation Offload flag. This flag is used for enabling UDP + * fragmentation in SW or in HW. When use UFO, mbuf->tso_segsz is used + * to store the MSS of UDP fragments. + */ +#define PKT_TX_UDP_SEG (1ULL << 42) + +/** + * Request security offload processing on the TX packet. + */ +#define PKT_TX_SEC_OFFLOAD (1ULL << 43) + +/** + * Offload the MACsec. This flag must be set by the application to enable + * this offload feature for a packet to be transmitted. + */ +#define PKT_TX_MACSEC (1ULL << 44) + +/** + * Bits 45:48 used for the tunnel type. + * When doing Tx offload like TSO or checksum, the HW needs to configure the + * tunnel type into the HW descriptors. + */ +#define PKT_TX_TUNNEL_VXLAN (0x1ULL << 45) +#define PKT_TX_TUNNEL_GRE (0x2ULL << 45) +#define PKT_TX_TUNNEL_IPIP (0x3ULL << 45) +#define PKT_TX_TUNNEL_GENEVE (0x4ULL << 45) +/**< TX packet with MPLS-in-UDP RFC 7510 header. */ +#define PKT_TX_TUNNEL_MPLSINUDP (0x5ULL << 45) +/* add new TX TUNNEL type here */ +#define PKT_TX_TUNNEL_MASK (0xFULL << 45) + /** * Second VLAN insertion (QinQ) flag. */ -#define PKT_TX_QINQ_PKT (1ULL << 49) /**< TX packet with double VLAN inserted. */ +#define PKT_TX_QINQ (1ULL << 49) /**< TX packet with double VLAN inserted. */ +/* this old name is deprecated */ +#define PKT_TX_QINQ_PKT PKT_TX_QINQ /** * TCP segmentation offload. To enable this offload feature for a @@ -166,7 +279,12 @@ extern "C" { */ #define PKT_TX_IPV6 (1ULL << 56) -#define PKT_TX_VLAN_PKT (1ULL << 57) /**< TX packet is a 802.1q VLAN packet. */ +/** + * TX packet is a 802.1q VLAN packet. + */ +#define PKT_TX_VLAN (1ULL << 57) +/* this old name is deprecated */ +#define PKT_TX_VLAN_PKT PKT_TX_VLAN /** * Offload the IP checksum of an external header in the hardware. The @@ -192,499 +310,25 @@ extern "C" { */ #define PKT_TX_OUTER_IPV6 (1ULL << 60) -#define __RESERVED (1ULL << 61) /**< reserved for future mbuf use */ - -#define IND_ATTACHED_MBUF (1ULL << 62) /**< Indirect attached mbuf */ - -/* Use final bit of flags to indicate a control mbuf */ -#define CTRL_MBUF_FLAG (1ULL << 63) /**< Mbuf contains control data */ - -/* - * 32 bits are divided into several fields to mark packet types. Note that - * each field is indexical. - * - Bit 3:0 is for L2 types. - * - Bit 7:4 is for L3 or outer L3 (for tunneling case) types. - * - Bit 11:8 is for L4 or outer L4 (for tunneling case) types. - * - Bit 15:12 is for tunnel types. - * - Bit 19:16 is for inner L2 types. - * - Bit 23:20 is for inner L3 types. - * - Bit 27:24 is for inner L4 types. - * - Bit 31:28 is reserved. - * - * To be compatible with Vector PMD, RTE_PTYPE_L3_IPV4, RTE_PTYPE_L3_IPV4_EXT, - * RTE_PTYPE_L3_IPV6, RTE_PTYPE_L3_IPV6_EXT, RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP - * and RTE_PTYPE_L4_SCTP should be kept as below in a contiguous 7 bits. - * - * Note that L3 types values are selected for checking IPV4/IPV6 header from - * performance point of view. Reading annotations of RTE_ETH_IS_IPV4_HDR and - * RTE_ETH_IS_IPV6_HDR is needed for any future changes of L3 type values. - * - * Note that the packet types of the same packet recognized by different - * hardware may be different, as different hardware may have different - * capability of packet type recognition. - * - * examples: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=0x29 - * | 'version'=6, 'next header'=0x3A - * | 'ICMPv6 header'> - * will be recognized on i40e hardware as packet type combination of, - * RTE_PTYPE_L2_ETHER | - * RTE_PTYPE_L3_IPV4_EXT_UNKNOWN | - * RTE_PTYPE_TUNNEL_IP | - * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN | - * RTE_PTYPE_INNER_L4_ICMP. - * - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=0x2F - * | 'GRE header' - * | 'version'=6, 'next header'=0x11 - * | 'UDP header'> - * will be recognized on i40e hardware as packet type combination of, - * RTE_PTYPE_L2_ETHER | - * RTE_PTYPE_L3_IPV6_EXT_UNKNOWN | - * RTE_PTYPE_TUNNEL_GRENAT | - * RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN | - * RTE_PTYPE_INNER_L4_UDP. - */ -#define RTE_PTYPE_UNKNOWN 0x00000000 -/** - * Ethernet packet type. - * It is used for outer packet for tunneling cases. - * - * Packet format: - * <'ether type'=[0x0800|0x86DD]> - */ -#define RTE_PTYPE_L2_ETHER 0x00000001 -/** - * Ethernet packet type for time sync. - * - * Packet format: - * <'ether type'=0x88F7> - */ -#define RTE_PTYPE_L2_ETHER_TIMESYNC 0x00000002 -/** - * ARP (Address Resolution Protocol) packet type. - * - * Packet format: - * <'ether type'=0x0806> - */ -#define RTE_PTYPE_L2_ETHER_ARP 0x00000003 /** - * LLDP (Link Layer Discovery Protocol) packet type. - * - * Packet format: - * <'ether type'=0x88CC> - */ -#define RTE_PTYPE_L2_ETHER_LLDP 0x00000004 -/** - * Mask of layer 2 packet types. - * It is used for outer packet for tunneling cases. + * Bitmask of all supported packet Tx offload features flags, + * which can be set for packet. */ -#define RTE_PTYPE_L2_MASK 0x0000000f -/** - * IP (Internet Protocol) version 4 packet type. - * It is used for outer packet for tunneling cases, and does not contain any - * header option. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'ihl'=5> - */ -#define RTE_PTYPE_L3_IPV4 0x00000010 -/** - * IP (Internet Protocol) version 4 packet type. - * It is used for outer packet for tunneling cases, and contains header - * options. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'ihl'=[6-15], 'options'> - */ -#define RTE_PTYPE_L3_IPV4_EXT 0x00000030 -/** - * IP (Internet Protocol) version 6 packet type. - * It is used for outer packet for tunneling cases, and does not contain any - * extension header. - * - * Packet format: - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=0x3B> - */ -#define RTE_PTYPE_L3_IPV6 0x00000040 -/** - * IP (Internet Protocol) version 4 packet type. - * It is used for outer packet for tunneling cases, and may or maynot contain - * header options. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'ihl'=[5-15], <'options'>> - */ -#define RTE_PTYPE_L3_IPV4_EXT_UNKNOWN 0x00000090 -/** - * IP (Internet Protocol) version 6 packet type. - * It is used for outer packet for tunneling cases, and contains extension - * headers. - * - * Packet format: - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], - * 'extension headers'> - */ -#define RTE_PTYPE_L3_IPV6_EXT 0x000000c0 -/** - * IP (Internet Protocol) version 6 packet type. - * It is used for outer packet for tunneling cases, and may or maynot contain - * extension headers. - * - * Packet format: - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], - * <'extension headers'>> - */ -#define RTE_PTYPE_L3_IPV6_EXT_UNKNOWN 0x000000e0 -/** - * Mask of layer 3 packet types. - * It is used for outer packet for tunneling cases. - */ -#define RTE_PTYPE_L3_MASK 0x000000f0 -/** - * TCP (Transmission Control Protocol) packet type. - * It is used for outer packet for tunneling cases. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=6, 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=6> - */ -#define RTE_PTYPE_L4_TCP 0x00000100 -/** - * UDP (User Datagram Protocol) packet type. - * It is used for outer packet for tunneling cases. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=17, 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=17> - */ -#define RTE_PTYPE_L4_UDP 0x00000200 -/** - * Fragmented IP (Internet Protocol) packet type. - * It is used for outer packet for tunneling cases. - * - * It refers to those packets of any IP types, which can be recognized as - * fragmented. A fragmented packet cannot be recognized as any other L4 types - * (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP, - * RTE_PTYPE_L4_NONFRAG). - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'MF'=1> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=44> - */ -#define RTE_PTYPE_L4_FRAG 0x00000300 -/** - * SCTP (Stream Control Transmission Protocol) packet type. - * It is used for outer packet for tunneling cases. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=132, 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=132> - */ -#define RTE_PTYPE_L4_SCTP 0x00000400 -/** - * ICMP (Internet Control Message Protocol) packet type. - * It is used for outer packet for tunneling cases. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=1, 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=1> - */ -#define RTE_PTYPE_L4_ICMP 0x00000500 -/** - * Non-fragmented IP (Internet Protocol) packet type. - * It is used for outer packet for tunneling cases. - * - * It refers to those packets of any IP types, while cannot be recognized as - * any of above L4 types (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, - * RTE_PTYPE_L4_FRAG, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP). - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'!=[6|17|44|132|1]> - */ -#define RTE_PTYPE_L4_NONFRAG 0x00000600 -/** - * Mask of layer 4 packet types. - * It is used for outer packet for tunneling cases. - */ -#define RTE_PTYPE_L4_MASK 0x00000f00 -/** - * IP (Internet Protocol) in IP (Internet Protocol) tunneling packet type. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=[4|41]> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=[4|41]> - */ -#define RTE_PTYPE_TUNNEL_IP 0x00001000 -/** - * GRE (Generic Routing Encapsulation) tunneling packet type. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=47> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=47> - */ -#define RTE_PTYPE_TUNNEL_GRE 0x00002000 -/** - * VXLAN (Virtual eXtensible Local Area Network) tunneling packet type. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=17 - * | 'destination port'=4798> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=17 - * | 'destination port'=4798> - */ -#define RTE_PTYPE_TUNNEL_VXLAN 0x00003000 -/** - * NVGRE (Network Virtualization using Generic Routing Encapsulation) tunneling - * packet type. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=47 - * | 'protocol type'=0x6558> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=47 - * | 'protocol type'=0x6558'> - */ -#define RTE_PTYPE_TUNNEL_NVGRE 0x00004000 -/** - * GENEVE (Generic Network Virtualization Encapsulation) tunneling packet type. - * - * Packet format: - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=17 - * | 'destination port'=6081> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=17 - * | 'destination port'=6081> - */ -#define RTE_PTYPE_TUNNEL_GENEVE 0x00005000 -/** - * Tunneling packet type of Teredo, VXLAN (Virtual eXtensible Local Area - * Network) or GRE (Generic Routing Encapsulation) could be recognized as this - * packet type, if they can not be recognized independently as of hardware - * capability. - */ -#define RTE_PTYPE_TUNNEL_GRENAT 0x00006000 -/** - * Mask of tunneling packet types. - */ -#define RTE_PTYPE_TUNNEL_MASK 0x0000f000 -/** - * Ethernet packet type. - * It is used for inner packet type only. - * - * Packet format (inner only): - * <'ether type'=[0x800|0x86DD]> - */ -#define RTE_PTYPE_INNER_L2_ETHER 0x00010000 -/** - * Ethernet packet type with VLAN (Virtual Local Area Network) tag. - * - * Packet format (inner only): - * <'ether type'=[0x800|0x86DD], vlan=[1-4095]> - */ -#define RTE_PTYPE_INNER_L2_ETHER_VLAN 0x00020000 -/** - * Mask of inner layer 2 packet types. - */ -#define RTE_PTYPE_INNER_L2_MASK 0x000f0000 -/** - * IP (Internet Protocol) version 4 packet type. - * It is used for inner packet only, and does not contain any header option. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'ihl'=5> - */ -#define RTE_PTYPE_INNER_L3_IPV4 0x00100000 -/** - * IP (Internet Protocol) version 4 packet type. - * It is used for inner packet only, and contains header options. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'ihl'=[6-15], 'options'> - */ -#define RTE_PTYPE_INNER_L3_IPV4_EXT 0x00200000 -/** - * IP (Internet Protocol) version 6 packet type. - * It is used for inner packet only, and does not contain any extension header. - * - * Packet format (inner only): - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=0x3B> - */ -#define RTE_PTYPE_INNER_L3_IPV6 0x00300000 -/** - * IP (Internet Protocol) version 4 packet type. - * It is used for inner packet only, and may or maynot contain header options. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'ihl'=[5-15], <'options'>> - */ -#define RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN 0x00400000 -/** - * IP (Internet Protocol) version 6 packet type. - * It is used for inner packet only, and contains extension headers. - * - * Packet format (inner only): - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], - * 'extension headers'> - */ -#define RTE_PTYPE_INNER_L3_IPV6_EXT 0x00500000 -/** - * IP (Internet Protocol) version 6 packet type. - * It is used for inner packet only, and may or maynot contain extension - * headers. - * - * Packet format (inner only): - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87], - * <'extension headers'>> - */ -#define RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN 0x00600000 -/** - * Mask of inner layer 3 packet types. - */ -#define RTE_PTYPE_INNER_L3_MASK 0x00f00000 -/** - * TCP (Transmission Control Protocol) packet type. - * It is used for inner packet only. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=6, 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=6> - */ -#define RTE_PTYPE_INNER_L4_TCP 0x01000000 -/** - * UDP (User Datagram Protocol) packet type. - * It is used for inner packet only. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=17, 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=17> - */ -#define RTE_PTYPE_INNER_L4_UDP 0x02000000 -/** - * Fragmented IP (Internet Protocol) packet type. - * It is used for inner packet only, and may or maynot have layer 4 packet. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'MF'=1> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=44> - */ -#define RTE_PTYPE_INNER_L4_FRAG 0x03000000 -/** - * SCTP (Stream Control Transmission Protocol) packet type. - * It is used for inner packet only. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=132, 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=132> - */ -#define RTE_PTYPE_INNER_L4_SCTP 0x04000000 -/** - * ICMP (Internet Control Message Protocol) packet type. - * It is used for inner packet only. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'=1, 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'=1> - */ -#define RTE_PTYPE_INNER_L4_ICMP 0x05000000 -/** - * Non-fragmented IP (Internet Protocol) packet type. - * It is used for inner packet only, and may or maynot have other unknown layer - * 4 packet types. - * - * Packet format (inner only): - * <'ether type'=0x0800 - * | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0> - * or, - * <'ether type'=0x86DD - * | 'version'=6, 'next header'!=[6|17|44|132|1]> - */ -#define RTE_PTYPE_INNER_L4_NONFRAG 0x06000000 -/** - * Mask of inner layer 4 packet types. - */ -#define RTE_PTYPE_INNER_L4_MASK 0x0f000000 - -/** - * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by - * one, bit 4 is selected to be used for IPv4 only. Then checking bit 4 can - * determine if it is an IPV4 packet. - */ -#define RTE_ETH_IS_IPV4_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV4) +#define PKT_TX_OFFLOAD_MASK ( \ + PKT_TX_IP_CKSUM | \ + PKT_TX_L4_MASK | \ + PKT_TX_OUTER_IP_CKSUM | \ + PKT_TX_TCP_SEG | \ + PKT_TX_IEEE1588_TMST | \ + PKT_TX_QINQ_PKT | \ + PKT_TX_VLAN_PKT | \ + PKT_TX_TUNNEL_MASK | \ + PKT_TX_MACSEC | \ + PKT_TX_SEC_OFFLOAD) -/** - * Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by - * one, bit 6 is selected to be used for IPv4 only. Then checking bit 6 can - * determine if it is an IPV4 packet. - */ -#define RTE_ETH_IS_IPV6_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV6) +#define __RESERVED (1ULL << 61) /**< reserved for future mbuf use */ -/* Check if it is a tunneling packet */ -#define RTE_ETH_IS_TUNNEL_PKT(ptype) ((ptype) & (RTE_PTYPE_TUNNEL_MASK | \ - RTE_PTYPE_INNER_L2_MASK | \ - RTE_PTYPE_INNER_L3_MASK | \ - RTE_PTYPE_INNER_L4_MASK)) +#define IND_ATTACHED_MBUF (1ULL << 62) /**< Indirect attached mbuf */ /** Alignment constraint of mbuf private area. */ #define RTE_MBUF_PRIV_ALIGN 8 @@ -699,6 +343,20 @@ extern "C" { */ const char *rte_get_rx_ol_flag_name(uint64_t mask); +/** + * Dump the list of RX offload flags in a buffer + * + * @param mask + * The mask describing the RX flags. + * @param buf + * The output buffer. + * @param buflen + * The length of the buffer. + * @return + * 0 on success, (-1) on error. + */ +int rte_get_rx_ol_flag_list(uint64_t mask, char *buf, size_t buflen); + /** * Get the name of a TX offload flag * @@ -711,6 +369,20 @@ const char *rte_get_rx_ol_flag_name(uint64_t mask); */ const char *rte_get_tx_ol_flag_name(uint64_t mask); +/** + * Dump the list of TX offload flags in a buffer + * + * @param mask + * The mask describing the TX flags. + * @param buf + * The output buffer. + * @param buflen + * The length of the buffer. + * @return + * 0 on success, (-1) on error. + */ +int rte_get_tx_ol_flag_list(uint64_t mask, char *buf, size_t buflen); + /** * Some NICs need at least 2KB buffer to RX standard Ethernet frame without * splitting it into multiple segments. @@ -723,14 +395,14 @@ const char *rte_get_tx_ol_flag_name(uint64_t mask); /* define a set of marker types that can be used to refer to set points in the * mbuf */ +__extension__ typedef void *MARKER[0]; /**< generic marker for a point in a structure */ +__extension__ typedef uint8_t MARKER8[0]; /**< generic marker with 1B alignment */ +__extension__ typedef uint64_t MARKER64[0]; /**< marker that allows us to overwrite 8 bytes * with a single assignment */ -/** Opaque rte_mbuf_offload structure declarations */ -struct rte_mbuf_offload; - /** * The generic rte_mbuf, containing a packet mbuf. */ @@ -738,28 +410,40 @@ struct rte_mbuf { MARKER cacheline0; void *buf_addr; /**< Virtual address of segment buffer. */ - phys_addr_t buf_physaddr; /**< Physical address of segment buffer. */ - - uint16_t buf_len; /**< Length of segment buffer. */ + /** + * Physical address of segment buffer. + * Force alignment to 8-bytes, so as to ensure we have the exact + * same mbuf cacheline0 layout for 32-bit and 64-bit. This makes + * working on vector drivers easier. + */ + RTE_STD_C11 + union { + rte_iova_t buf_iova; + rte_iova_t buf_physaddr; /**< deprecated */ + } __rte_aligned(sizeof(rte_iova_t)); - /* next 6 bytes are initialised on RX descriptor rearm */ - MARKER8 rearm_data; + /* next 8 bytes are initialised on RX descriptor rearm */ + MARKER64 rearm_data; uint16_t data_off; /** - * 16-bit Reference counter. + * Reference counter. Its size should at least equal to the size + * of port field (16 bits), to support zero-copy broadcast. * It should only be accessed using the following functions: * rte_mbuf_refcnt_update(), rte_mbuf_refcnt_read(), and * rte_mbuf_refcnt_set(). The functionality of these functions (atomic, * or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC * config option. */ + RTE_STD_C11 union { rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */ uint16_t refcnt; /**< Non-atomically accessed refcnt */ }; - uint8_t nb_segs; /**< Number of segments. */ - uint8_t port; /**< Input port. */ + uint16_t nb_segs; /**< Number of segments. */ + + /** Input port (16 bits to support more than 256 virtual ports). */ + uint16_t port; uint64_t ol_flags; /**< Offload features. */ @@ -768,8 +452,12 @@ struct rte_mbuf { /* * The packet type, which is the combination of outer/inner L2, L3, L4 - * and tunnel types. + * and tunnel types. The packet_type is about data really present in the + * mbuf. Example: if vlan stripping is enabled, a received vlan packet + * would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the + * vlan is stripped from the data. */ + RTE_STD_C11 union { uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */ struct { @@ -777,19 +465,34 @@ struct rte_mbuf { uint32_t l3_type:4; /**< (Outer) L3 type. */ uint32_t l4_type:4; /**< (Outer) L4 type. */ uint32_t tun_type:4; /**< Tunnel type. */ - uint32_t inner_l2_type:4; /**< Inner L2 type. */ - uint32_t inner_l3_type:4; /**< Inner L3 type. */ + RTE_STD_C11 + union { + uint8_t inner_esp_next_proto; + /**< ESP next protocol type, valid if + * RTE_PTYPE_TUNNEL_ESP tunnel type is set + * on both Tx and Rx. + */ + __extension__ + struct { + uint8_t inner_l2_type:4; + /**< Inner L2 type. */ + uint8_t inner_l3_type:4; + /**< Inner L3 type. */ + }; + }; uint32_t inner_l4_type:4; /**< Inner L4 type. */ }; }; uint32_t pkt_len; /**< Total pkt len: sum of all segments. */ uint16_t data_len; /**< Amount of data in segment buffer. */ - uint16_t vlan_tci; /**< VLAN Tag Control Identifier (CPU order) */ + /** VLAN TCI (CPU order), valid if PKT_RX_VLAN is set. */ + uint16_t vlan_tci; union { uint32_t rss; /**< RSS hash result if RSS enabled */ struct { + RTE_STD_C11 union { struct { uint16_t hash; @@ -809,13 +512,20 @@ struct rte_mbuf { uint32_t usr; /**< User defined tags. See rte_distributor_process() */ } hash; /**< hash information */ - uint32_t seqn; /**< Sequence number. See also rte_reorder_insert() */ + /** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ is set. */ + uint16_t vlan_tci_outer; - uint16_t vlan_tci_outer; /**< Outer VLAN Tag Control Identifier (CPU order) */ + uint16_t buf_len; /**< Length of segment buffer. */ + + /** Valid if PKT_RX_TIMESTAMP is set. The unit and time reference + * are not normalized but are always the same for a given port. + */ + uint64_t timestamp; /* second cache line - fields only used in slow path or on TX */ MARKER cacheline1 __rte_cache_min_aligned; + RTE_STD_C11 union { void *userdata; /**< Can be used for external metadata */ uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */ @@ -825,10 +535,15 @@ struct rte_mbuf { struct rte_mbuf *next; /**< Next segment of scattered packet. */ /* fields to support TX offloads */ + RTE_STD_C11 union { uint64_t tx_offload; /**< combined for easy fetch */ + __extension__ struct { - uint64_t l2_len:7; /**< L2 (MAC) Header Length. */ + uint64_t l2_len:7; + /**< L2 (MAC) Header Length for non-tunneling pkt. + * Outer_L4_len + ... + Inner_L2_len for tunneling pkt. + */ uint64_t l3_len:9; /**< L3 (IP) Header Length. */ uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */ uint64_t tso_segsz:16; /**< TCP TSO segment size */ @@ -848,28 +563,77 @@ struct rte_mbuf { /** Timesync flags for use with IEEE1588. */ uint16_t timesync; - /* Chain of off-load operations to perform on mbuf */ - struct rte_mbuf_offload *offload_ops; + /** Sequence number. See also rte_reorder_insert(). */ + uint32_t seqn; + } __rte_cache_aligned; +/**< Maximum number of nb_segs allowed. */ +#define RTE_MBUF_MAX_NB_SEGS UINT16_MAX + +/** + * Prefetch the first part of the mbuf + * + * The first 64 bytes of the mbuf corresponds to fields that are used early + * in the receive path. If the cache line of the architecture is higher than + * 64B, the second part will also be prefetched. + * + * @param m + * The pointer to the mbuf. + */ +static inline void +rte_mbuf_prefetch_part1(struct rte_mbuf *m) +{ + rte_prefetch0(&m->cacheline0); +} + +/** + * Prefetch the second part of the mbuf + * + * The next 64 bytes of the mbuf corresponds to fields that are used in the + * transmit path. If the cache line of the architecture is higher than 64B, + * this function does nothing as it is expected that the full mbuf is + * already in cache. + * + * @param m + * The pointer to the mbuf. + */ +static inline void +rte_mbuf_prefetch_part2(struct rte_mbuf *m) +{ +#if RTE_CACHE_LINE_SIZE == 64 + rte_prefetch0(&m->cacheline1); +#else + RTE_SET_USED(m); +#endif +} + + static inline uint16_t rte_pktmbuf_priv_size(struct rte_mempool *mp); /** - * Return the DMA address of the beginning of the mbuf data + * Return the IO address of the beginning of the mbuf data * * @param mb * The pointer to the mbuf. * @return - * The physical address of the beginning of the mbuf data + * The IO address of the beginning of the mbuf data */ +static inline rte_iova_t +rte_mbuf_data_iova(const struct rte_mbuf *mb) +{ + return mb->buf_iova + mb->data_off; +} + +__rte_deprecated static inline phys_addr_t rte_mbuf_data_dma_addr(const struct rte_mbuf *mb) { - return mb->buf_physaddr + mb->data_off; + return rte_mbuf_data_iova(mb); } /** - * Return the default DMA address of the beginning of the mbuf data + * Return the default IO address of the beginning of the mbuf data * * This function is used by drivers in their receive function, as it * returns the location where data should be written by the NIC, taking @@ -878,12 +642,19 @@ rte_mbuf_data_dma_addr(const struct rte_mbuf *mb) * @param mb * The pointer to the mbuf. * @return - * The physical address of the beginning of the mbuf data + * The IO address of the beginning of the mbuf data */ +static inline rte_iova_t +rte_mbuf_data_iova_default(const struct rte_mbuf *mb) +{ + return mb->buf_iova + RTE_PKTMBUF_HEADROOM; +} + +__rte_deprecated static inline phys_addr_t rte_mbuf_data_dma_addr_default(const struct rte_mbuf *mb) { - return mb->buf_physaddr + RTE_PKTMBUF_HEADROOM; + return rte_mbuf_data_iova_default(mb); } /** @@ -942,29 +713,11 @@ struct rte_pktmbuf_pool_private { /** check mbuf type in debug mode */ #define __rte_mbuf_sanity_check(m, is_h) rte_mbuf_sanity_check(m, is_h) -/** check mbuf type in debug mode if mbuf pointer is not null */ -#define __rte_mbuf_sanity_check_raw(m, is_h) do { \ - if ((m) != NULL) \ - rte_mbuf_sanity_check(m, is_h); \ -} while (0) - -/** MBUF asserts in debug mode */ -#define RTE_MBUF_ASSERT(exp) \ -if (!(exp)) { \ - rte_panic("line%d\tassert \"" #exp "\" failed\n", __LINE__); \ -} - #else /* RTE_LIBRTE_MBUF_DEBUG */ /** check mbuf type in debug mode */ #define __rte_mbuf_sanity_check(m, is_h) do { } while (0) -/** check mbuf type in debug mode if mbuf pointer is not null */ -#define __rte_mbuf_sanity_check_raw(m, is_h) do { } while (0) - -/** MBUF asserts in debug mode */ -#define RTE_MBUF_ASSERT(exp) do { } while (0) - #endif /* RTE_LIBRTE_MBUF_DEBUG */ #ifdef RTE_MBUF_REFCNT_ATOMIC @@ -995,6 +748,13 @@ rte_mbuf_refcnt_set(struct rte_mbuf *m, uint16_t new_value) rte_atomic16_set(&m->refcnt_atomic, new_value); } +/* internal */ +static inline uint16_t +__rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value) +{ + return (uint16_t)(rte_atomic16_add_return(&m->refcnt_atomic, value)); +} + /** * Adds given value to an mbuf's refcnt and returns its new value. * @param m @@ -1019,19 +779,26 @@ rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value) return 1 + value; } - return (uint16_t)(rte_atomic16_add_return(&m->refcnt_atomic, value)); + return __rte_mbuf_refcnt_update(m, value); } #else /* ! RTE_MBUF_REFCNT_ATOMIC */ +/* internal */ +static inline uint16_t +__rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value) +{ + m->refcnt = (uint16_t)(m->refcnt + value); + return m->refcnt; +} + /** * Adds given value to an mbuf's refcnt and returns its new value. */ static inline uint16_t rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value) { - m->refcnt = (uint16_t)(m->refcnt + value); - return m->refcnt; + return __rte_mbuf_refcnt_update(m, value); } /** @@ -1076,10 +843,25 @@ rte_mbuf_refcnt_set(struct rte_mbuf *m, uint16_t new_value) void rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header); +#define MBUF_RAW_ALLOC_CHECK(m) do { \ + RTE_ASSERT(rte_mbuf_refcnt_read(m) == 1); \ + RTE_ASSERT((m)->next == NULL); \ + RTE_ASSERT((m)->nb_segs == 1); \ + __rte_mbuf_sanity_check(m, 0); \ +} while (0) + /** - * @internal Allocate a new mbuf from mempool *mp*. - * The use of that function is reserved for RTE internal needs. - * Please use rte_pktmbuf_alloc(). + * Allocate an uninitialized mbuf from mempool *mp*. + * + * This function can be used by PMDs (especially in RX functions) to + * allocate an uninitialized mbuf. The driver is responsible of + * initializing all the required fields. See rte_pktmbuf_reset(). + * For standard needs, prefer rte_pktmbuf_alloc(). + * + * The caller can expect that the following fields of the mbuf structure + * are initialized: buf_addr, buf_iova, buf_len, refcnt=1, nb_segs=1, + * next=NULL, pool, priv_size. The other fields must be initialized + * by the caller. * * @param mp * The mempool from which mbuf is allocated. @@ -1087,130 +869,63 @@ rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header); * - The pointer to the new mbuf on success. * - NULL if allocation failed. */ -static inline struct rte_mbuf *__rte_mbuf_raw_alloc(struct rte_mempool *mp) +static inline struct rte_mbuf *rte_mbuf_raw_alloc(struct rte_mempool *mp) { struct rte_mbuf *m; - void *mb = NULL; - if (rte_mempool_get(mp, &mb) < 0) + + if (rte_mempool_get(mp, (void **)&m) < 0) return NULL; - m = (struct rte_mbuf *)mb; - RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(m) == 0); - rte_mbuf_refcnt_set(m, 1); + MBUF_RAW_ALLOC_CHECK(m); return m; } /** - * @internal Put mbuf back into its original mempool. - * The use of that function is reserved for RTE internal needs. - * Please use rte_pktmbuf_free(). + * Put mbuf back into its original mempool. + * + * The caller must ensure that the mbuf is direct and properly + * reinitialized (refcnt=1, next=NULL, nb_segs=1), as done by + * rte_pktmbuf_prefree_seg(). + * + * This function should be used with care, when optimization is + * required. For standard needs, prefer rte_pktmbuf_free() or + * rte_pktmbuf_free_seg(). * * @param m * The mbuf to be freed. */ -static inline void __attribute__((always_inline)) -__rte_mbuf_raw_free(struct rte_mbuf *m) +static __rte_always_inline void +rte_mbuf_raw_free(struct rte_mbuf *m) { - RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(m) == 0); + RTE_ASSERT(RTE_MBUF_DIRECT(m)); + RTE_ASSERT(rte_mbuf_refcnt_read(m) == 1); + RTE_ASSERT(m->next == NULL); + RTE_ASSERT(m->nb_segs == 1); + __rte_mbuf_sanity_check(m, 0); rte_mempool_put(m->pool, m); } -/* Operations on ctrl mbuf */ - -/** - * The control mbuf constructor. - * - * This function initializes some fields in an mbuf structure that are - * not modified by the user once created (mbuf type, origin pool, buffer - * start address, and so on). This function is given as a callback function - * to rte_mempool_create() at pool creation time. - * - * @param mp - * The mempool from which the mbuf is allocated. - * @param opaque_arg - * A pointer that can be used by the user to retrieve useful information - * for mbuf initialization. This pointer comes from the ``init_arg`` - * parameter of rte_mempool_create(). - * @param m - * The mbuf to initialize. - * @param i - * The index of the mbuf in the pool table. - */ -void rte_ctrlmbuf_init(struct rte_mempool *mp, void *opaque_arg, - void *m, unsigned i); - -/** - * Allocate a new mbuf (type is ctrl) from mempool *mp*. - * - * This new mbuf is initialized with data pointing to the beginning of - * buffer, and with a length of zero. - * - * @param mp - * The mempool from which the mbuf is allocated. - * @return - * - The pointer to the new mbuf on success. - * - NULL if allocation failed. - */ -#define rte_ctrlmbuf_alloc(mp) rte_pktmbuf_alloc(mp) - -/** - * Free a control mbuf back into its original mempool. - * - * @param m - * The control mbuf to be freed. - */ -#define rte_ctrlmbuf_free(m) rte_pktmbuf_free(m) - -/** - * A macro that returns the pointer to the carried data. - * - * The value that can be read or assigned. - * - * @param m - * The control mbuf. - */ -#define rte_ctrlmbuf_data(m) ((char *)((m)->buf_addr) + (m)->data_off) - -/** - * A macro that returns the length of the carried data. - * - * The value that can be read or assigned. - * - * @param m - * The control mbuf. - */ -#define rte_ctrlmbuf_len(m) rte_pktmbuf_data_len(m) - -/** - * Tests if an mbuf is a control mbuf - * - * @param m - * The mbuf to be tested - * @return - * - True (1) if the mbuf is a control mbuf - * - False(0) otherwise - */ -static inline int -rte_is_ctrlmbuf(struct rte_mbuf *m) +/* compat with older versions */ +__rte_deprecated +static inline void +__rte_mbuf_raw_free(struct rte_mbuf *m) { - return !!(m->ol_flags & CTRL_MBUF_FLAG); + rte_mbuf_raw_free(m); } -/* Operations on pkt mbuf */ - /** * The packet mbuf constructor. * * This function initializes some fields in the mbuf structure that are * not modified by the user once created (origin pool, buffer start * address, and so on). This function is given as a callback function to - * rte_mempool_create() at pool creation time. + * rte_mempool_obj_iter() or rte_mempool_create() at pool creation time. * * @param mp * The mempool from which mbufs originate. * @param opaque_arg * A pointer that can be used by the user to retrieve useful information - * for mbuf initialization. This pointer comes from the ``init_arg`` - * parameter of rte_mempool_create(). + * for mbuf initialization. This pointer is the opaque argument passed to + * rte_mempool_obj_iter() or rte_mempool_create(). * @param m * The mbuf to initialize. * @param i @@ -1225,7 +940,8 @@ void rte_pktmbuf_init(struct rte_mempool *mp, void *opaque_arg, * * This function initializes the mempool private data in the case of a * pktmbuf pool. This private data is needed by the driver. The - * function is given as a callback function to rte_mempool_create() at + * function must be called on the mempool before it is used, or it + * can be given as a callback function to rte_mempool_create() at * pool creation. It can be extended by the user, for example, to * provide another packet size. * @@ -1233,8 +949,8 @@ void rte_pktmbuf_init(struct rte_mempool *mp, void *opaque_arg, * The mempool from which mbufs originate. * @param opaque_arg * A pointer that can be used by the user to retrieve useful information - * for mbuf initialization. This pointer comes from the ``init_arg`` - * parameter of rte_mempool_create(). + * for mbuf initialization. This pointer is the opaque argument passed to + * rte_mempool_create(). */ void rte_pktmbuf_pool_init(struct rte_mempool *mp, void *opaque_arg); @@ -1242,8 +958,7 @@ void rte_pktmbuf_pool_init(struct rte_mempool *mp, void *opaque_arg); * Create a mbuf pool. * * This function creates and initializes a packet mbuf pool. It is - * a wrapper to rte_mempool_create() with the proper packet constructor - * and mempool constructor. + * a wrapper to rte_mempool functions. * * @param name * The name of the mbuf pool. @@ -1278,6 +993,48 @@ rte_pktmbuf_pool_create(const char *name, unsigned n, unsigned cache_size, uint16_t priv_size, uint16_t data_room_size, int socket_id); +/** + * Create a mbuf pool with a given mempool ops name + * + * This function creates and initializes a packet mbuf pool. It is + * a wrapper to rte_mempool functions. + * + * @param name + * The name of the mbuf pool. + * @param n + * The number of elements in the mbuf pool. The optimum size (in terms + * of memory usage) for a mempool is when n is a power of two minus one: + * n = (2^q - 1). + * @param cache_size + * Size of the per-core object cache. See rte_mempool_create() for + * details. + * @param priv_size + * Size of application private are between the rte_mbuf structure + * and the data buffer. This value must be aligned to RTE_MBUF_PRIV_ALIGN. + * @param data_room_size + * Size of data buffer in each mbuf, including RTE_PKTMBUF_HEADROOM. + * @param socket_id + * The socket identifier where the memory should be allocated. The + * value can be *SOCKET_ID_ANY* if there is no NUMA constraint for the + * reserved zone. + * @param ops_name + * The mempool ops name to be used for this mempool instead of + * default mempool. The value can be *NULL* to use default mempool. + * @return + * The pointer to the new allocated mempool, on success. NULL on error + * with rte_errno set appropriately. Possible rte_errno values include: + * - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure + * - E_RTE_SECONDARY - function was called from a secondary process instance + * - EINVAL - cache size provided is too large, or priv_size is not aligned. + * - ENOSPC - the maximum number of memzones has already been allocated + * - EEXIST - a memzone with the same name already exists + * - ENOMEM - no appropriate memory area found in which to create memzone + */ +struct rte_mempool * __rte_experimental +rte_pktmbuf_pool_create_by_ops(const char *name, unsigned int n, + unsigned int cache_size, uint16_t priv_size, uint16_t data_room_size, + int socket_id, const char *ops_name); + /** * Get the data room size of mbufs stored in a pktmbuf_pool * @@ -1319,6 +1076,19 @@ rte_pktmbuf_priv_size(struct rte_mempool *mp) return mbp_priv->mbuf_priv_size; } +/** + * Reset the data_off field of a packet mbuf to its default value. + * + * The given mbuf must have only one segment, which should be empty. + * + * @param m + * The packet mbuf's data_off field has to be reset. + */ +static inline void rte_pktmbuf_reset_headroom(struct rte_mbuf *m) +{ + m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len); +} + /** * Reset the fields of a packet mbuf to their default values. * @@ -1327,6 +1097,8 @@ rte_pktmbuf_priv_size(struct rte_mempool *mp) * @param m * The packet mbuf to be resetted. */ +#define MBUF_INVALID_PORT UINT16_MAX + static inline void rte_pktmbuf_reset(struct rte_mbuf *m) { m->next = NULL; @@ -1335,12 +1107,11 @@ static inline void rte_pktmbuf_reset(struct rte_mbuf *m) m->vlan_tci = 0; m->vlan_tci_outer = 0; m->nb_segs = 1; - m->port = 0xff; + m->port = MBUF_INVALID_PORT; m->ol_flags = 0; m->packet_type = 0; - m->data_off = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ? - RTE_PKTMBUF_HEADROOM : m->buf_len; + rte_pktmbuf_reset_headroom(m); m->data_len = 0; __rte_mbuf_sanity_check(m, 1); @@ -1362,7 +1133,7 @@ static inline void rte_pktmbuf_reset(struct rte_mbuf *m) static inline struct rte_mbuf *rte_pktmbuf_alloc(struct rte_mempool *mp) { struct rte_mbuf *m; - if ((m = __rte_mbuf_raw_alloc(mp)) != NULL) + if ((m = rte_mbuf_raw_alloc(mp)) != NULL) rte_pktmbuf_reset(m); return m; } @@ -1379,6 +1150,7 @@ static inline struct rte_mbuf *rte_pktmbuf_alloc(struct rte_mempool *mp) * Array size * @return * - 0: Success + * - -ENOENT: Not enough entries in the mempool; no mbufs are retrieved. */ static inline int rte_pktmbuf_alloc_bulk(struct rte_mempool *pool, struct rte_mbuf **mbufs, unsigned count) @@ -1398,25 +1170,25 @@ static inline int rte_pktmbuf_alloc_bulk(struct rte_mempool *pool, switch (count % 4) { case 0: while (idx != count) { - RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0); - rte_mbuf_refcnt_set(mbufs[idx], 1); + MBUF_RAW_ALLOC_CHECK(mbufs[idx]); rte_pktmbuf_reset(mbufs[idx]); idx++; + /* fall-through */ case 3: - RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0); - rte_mbuf_refcnt_set(mbufs[idx], 1); + MBUF_RAW_ALLOC_CHECK(mbufs[idx]); rte_pktmbuf_reset(mbufs[idx]); idx++; + /* fall-through */ case 2: - RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0); - rte_mbuf_refcnt_set(mbufs[idx], 1); + MBUF_RAW_ALLOC_CHECK(mbufs[idx]); rte_pktmbuf_reset(mbufs[idx]); idx++; + /* fall-through */ case 1: - RTE_MBUF_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0); - rte_mbuf_refcnt_set(mbufs[idx], 1); + MBUF_RAW_ALLOC_CHECK(mbufs[idx]); rte_pktmbuf_reset(mbufs[idx]); idx++; + /* fall-through */ } } return 0; @@ -1427,6 +1199,8 @@ static inline int rte_pktmbuf_alloc_bulk(struct rte_mempool *pool, * * After attachment we refer the mbuf we attached as 'indirect', * while mbuf we attached to as 'direct'. + * The direct mbuf's reference counter is incremented. + * * Right now, not supported: * - attachment for already indirect mbuf (e.g. - mi has to be direct). * - mbuf we trying to attach (mi) is used by someone else @@ -1441,7 +1215,7 @@ static inline void rte_pktmbuf_attach(struct rte_mbuf *mi, struct rte_mbuf *m) { struct rte_mbuf *md; - RTE_MBUF_ASSERT(RTE_MBUF_DIRECT(mi) && + RTE_ASSERT(RTE_MBUF_DIRECT(mi) && rte_mbuf_refcnt_read(mi) == 1); /* if m is not direct, get the mbuf that embeds the data */ @@ -1452,11 +1226,10 @@ static inline void rte_pktmbuf_attach(struct rte_mbuf *mi, struct rte_mbuf *m) rte_mbuf_refcnt_update(md, 1); mi->priv_size = m->priv_size; - mi->buf_physaddr = m->buf_physaddr; + mi->buf_iova = m->buf_iova; mi->buf_addr = m->buf_addr; mi->buf_len = m->buf_len; - mi->next = m->next; mi->data_off = m->data_off; mi->data_len = m->data_len; mi->port = m->port; @@ -1470,6 +1243,7 @@ static inline void rte_pktmbuf_attach(struct rte_mbuf *mi, struct rte_mbuf *m) mi->nb_segs = 1; mi->ol_flags = m->ol_flags | IND_ATTACHED_MBUF; mi->packet_type = m->packet_type; + mi->timestamp = m->timestamp; __rte_mbuf_sanity_check(mi, 1); __rte_mbuf_sanity_check(m, 0); @@ -1480,13 +1254,17 @@ static inline void rte_pktmbuf_attach(struct rte_mbuf *mi, struct rte_mbuf *m) * * - restore original mbuf address and length values. * - reset pktmbuf data and data_len to their default values. - * All other fields of the given packet mbuf will be left intact. + * - decrement the direct mbuf's reference counter. When the + * reference counter becomes 0, the direct mbuf is freed. + * + * All other fields of the given packet mbuf will be left intact. * * @param m * The indirect attached packet mbuf. */ static inline void rte_pktmbuf_detach(struct rte_mbuf *m) { + struct rte_mbuf *md = rte_mbuf_from_indirect(m); struct rte_mempool *mp = m->pool; uint32_t mbuf_size, buf_len, priv_size; @@ -1496,35 +1274,75 @@ static inline void rte_pktmbuf_detach(struct rte_mbuf *m) m->priv_size = priv_size; m->buf_addr = (char *)m + mbuf_size; - m->buf_physaddr = rte_mempool_virt2phy(mp, m) + mbuf_size; + m->buf_iova = rte_mempool_virt2iova(m) + mbuf_size; m->buf_len = (uint16_t)buf_len; - m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len); + rte_pktmbuf_reset_headroom(m); m->data_len = 0; m->ol_flags = 0; + + if (rte_mbuf_refcnt_update(md, -1) == 0) { + md->next = NULL; + md->nb_segs = 1; + rte_mbuf_refcnt_set(md, 1); + rte_mbuf_raw_free(md); + } } -static inline struct rte_mbuf* __attribute__((always_inline)) -__rte_pktmbuf_prefree_seg(struct rte_mbuf *m) +/** + * Decrease reference counter and unlink a mbuf segment + * + * This function does the same than a free, except that it does not + * return the segment to its pool. + * It decreases the reference counter, and if it reaches 0, it is + * detached from its parent for an indirect mbuf. + * + * @param m + * The mbuf to be unlinked + * @return + * - (m) if it is the last reference. It can be recycled or freed. + * - (NULL) if the mbuf still has remaining references on it. + */ +static __rte_always_inline struct rte_mbuf * +rte_pktmbuf_prefree_seg(struct rte_mbuf *m) { __rte_mbuf_sanity_check(m, 0); - if (likely(rte_mbuf_refcnt_update(m, -1) == 0)) { + if (likely(rte_mbuf_refcnt_read(m) == 1)) { - /* if this is an indirect mbuf, then - * - detach mbuf - * - free attached mbuf segment - */ - if (RTE_MBUF_INDIRECT(m)) { - struct rte_mbuf *md = rte_mbuf_from_indirect(m); + if (RTE_MBUF_INDIRECT(m)) rte_pktmbuf_detach(m); - if (rte_mbuf_refcnt_update(md, -1) == 0) - __rte_mbuf_raw_free(md); + + if (m->next != NULL) { + m->next = NULL; + m->nb_segs = 1; } + + return m; + + } else if (__rte_mbuf_refcnt_update(m, -1) == 0) { + + if (RTE_MBUF_INDIRECT(m)) + rte_pktmbuf_detach(m); + + if (m->next != NULL) { + m->next = NULL; + m->nb_segs = 1; + } + rte_mbuf_refcnt_set(m, 1); + return m; } return NULL; } +/* deprecated, replaced by rte_pktmbuf_prefree_seg() */ +__rte_deprecated +static inline struct rte_mbuf * +__rte_pktmbuf_prefree_seg(struct rte_mbuf *m) +{ + return rte_pktmbuf_prefree_seg(m); +} + /** * Free a segment of a packet mbuf into its original mempool. * @@ -1534,13 +1352,12 @@ __rte_pktmbuf_prefree_seg(struct rte_mbuf *m) * @param m * The packet mbuf segment to be freed. */ -static inline void __attribute__((always_inline)) +static __rte_always_inline void rte_pktmbuf_free_seg(struct rte_mbuf *m) { - if (likely(NULL != (m = __rte_pktmbuf_prefree_seg(m)))) { - m->next = NULL; - __rte_mbuf_raw_free(m); - } + m = rte_pktmbuf_prefree_seg(m); + if (likely(m != NULL)) + rte_mbuf_raw_free(m); } /** @@ -1550,13 +1367,14 @@ rte_pktmbuf_free_seg(struct rte_mbuf *m) * segment is added back into its original mempool. * * @param m - * The packet mbuf to be freed. + * The packet mbuf to be freed. If NULL, the function does nothing. */ static inline void rte_pktmbuf_free(struct rte_mbuf *m) { struct rte_mbuf *m_next; - __rte_mbuf_sanity_check(m, 1); + if (m != NULL) + __rte_mbuf_sanity_check(m, 1); while (m != NULL) { m_next = m->next; @@ -1587,7 +1405,7 @@ static inline struct rte_mbuf *rte_pktmbuf_clone(struct rte_mbuf *md, { struct rte_mbuf *mc, *mi, **prev; uint32_t pktlen; - uint8_t nseg; + uint16_t nseg; if (unlikely ((mc = rte_pktmbuf_alloc(mp)) == NULL)) return NULL; @@ -1649,7 +1467,7 @@ static inline void rte_pktmbuf_refcnt_update(struct rte_mbuf *m, int16_t v) */ static inline uint16_t rte_pktmbuf_headroom(const struct rte_mbuf *m) { - __rte_mbuf_sanity_check(m, 1); + __rte_mbuf_sanity_check(m, 0); return m->data_off; } @@ -1663,7 +1481,7 @@ static inline uint16_t rte_pktmbuf_headroom(const struct rte_mbuf *m) */ static inline uint16_t rte_pktmbuf_tailroom(const struct rte_mbuf *m) { - __rte_mbuf_sanity_check(m, 1); + __rte_mbuf_sanity_check(m, 0); return (uint16_t)(m->buf_len - rte_pktmbuf_headroom(m) - m->data_len); } @@ -1678,12 +1496,10 @@ static inline uint16_t rte_pktmbuf_tailroom(const struct rte_mbuf *m) */ static inline struct rte_mbuf *rte_pktmbuf_lastseg(struct rte_mbuf *m) { - struct rte_mbuf *m2 = (struct rte_mbuf *)m; - __rte_mbuf_sanity_check(m, 1); - while (m2->next != NULL) - m2 = m2->next; - return m2; + while (m->next != NULL) + m = m->next; + return m; } /** @@ -1718,7 +1534,7 @@ static inline struct rte_mbuf *rte_pktmbuf_lastseg(struct rte_mbuf *m) #define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0) /** - * A macro that returns the physical address that points to an offset of the + * A macro that returns the IO address that points to an offset of the * start of the data in the mbuf * * @param m @@ -1726,17 +1542,24 @@ static inline struct rte_mbuf *rte_pktmbuf_lastseg(struct rte_mbuf *m) * @param o * The offset into the data to calculate address from. */ +#define rte_pktmbuf_iova_offset(m, o) \ + (rte_iova_t)((m)->buf_iova + (m)->data_off + (o)) + +/* deprecated */ #define rte_pktmbuf_mtophys_offset(m, o) \ - (phys_addr_t)((m)->buf_physaddr + (m)->data_off + (o)) + rte_pktmbuf_iova_offset(m, o) /** - * A macro that returns the physical address that points to the start of the + * A macro that returns the IO address that points to the start of the * data in the mbuf * * @param m * The packet mbuf. */ -#define rte_pktmbuf_mtophys(m) rte_pktmbuf_mtophys_offset(m, 0) +#define rte_pktmbuf_iova(m) rte_pktmbuf_iova_offset(m, 0) + +/* deprecated */ +#define rte_pktmbuf_mtophys(m) rte_pktmbuf_iova(m) /** * A macro that returns the length of the packet. @@ -1891,6 +1714,41 @@ static inline int rte_pktmbuf_is_contiguous(const struct rte_mbuf *m) return !!(m->nb_segs == 1); } +/** + * @internal used by rte_pktmbuf_read(). + */ +const void *__rte_pktmbuf_read(const struct rte_mbuf *m, uint32_t off, + uint32_t len, void *buf); + +/** + * Read len data bytes in a mbuf at specified offset. + * + * If the data is contiguous, return the pointer in the mbuf data, else + * copy the data in the buffer provided by the user and return its + * pointer. + * + * @param m + * The pointer to the mbuf. + * @param off + * The offset of the data in the mbuf. + * @param len + * The amount of bytes to read. + * @param buf + * The buffer where data is copied if it is not contiguous in mbuf + * data. Its length should be at least equal to the len parameter. + * @return + * The pointer to the data, either in the mbuf if it is contiguous, + * or in the user buffer. If mbuf is too small, NULL is returned. + */ +static inline const void *rte_pktmbuf_read(const struct rte_mbuf *m, + uint32_t off, uint32_t len, void *buf) +{ + if (likely(off + len <= rte_pktmbuf_data_len(m))) + return rte_pktmbuf_mtod_offset(m, char *, off); + else + return __rte_pktmbuf_read(m, off, len, buf); +} + /** * Chain an mbuf to another, thereby creating a segmented packet. * @@ -1905,14 +1763,14 @@ static inline int rte_pktmbuf_is_contiguous(const struct rte_mbuf *m) * * @return * - 0, on success. - * - -EOVERFLOW, if the chain is full (256 entries) + * - -EOVERFLOW, if the chain segment limit exceeded */ static inline int rte_pktmbuf_chain(struct rte_mbuf *head, struct rte_mbuf *tail) { struct rte_mbuf *cur_tail; /* Check for number-of-segments-overflow */ - if (head->nb_segs + tail->nb_segs >= 1 << (sizeof(head->nb_segs) * 8)) + if (head->nb_segs + tail->nb_segs > RTE_MBUF_MAX_NB_SEGS) return -EOVERFLOW; /* Chain 'tail' onto the old tail */ @@ -1920,7 +1778,7 @@ static inline int rte_pktmbuf_chain(struct rte_mbuf *head, struct rte_mbuf *tail cur_tail->next = tail; /* accumulate number of segments and total length. */ - head->nb_segs = (uint8_t)(head->nb_segs + tail->nb_segs); + head->nb_segs += tail->nb_segs; head->pkt_len += tail->pkt_len; /* pkt_len is only set in the head */ @@ -1930,7 +1788,109 @@ static inline int rte_pktmbuf_chain(struct rte_mbuf *head, struct rte_mbuf *tail } /** - * Dump an mbuf structure to the console. + * Validate general requirements for Tx offload in mbuf. + * + * This function checks correctness and completeness of Tx offload settings. + * + * @param m + * The packet mbuf to be validated. + * @return + * 0 if packet is valid + */ +static inline int +rte_validate_tx_offload(const struct rte_mbuf *m) +{ + uint64_t ol_flags = m->ol_flags; + uint64_t inner_l3_offset = m->l2_len; + + /* Does packet set any of available offloads? */ + if (!(ol_flags & PKT_TX_OFFLOAD_MASK)) + return 0; + + if (ol_flags & PKT_TX_OUTER_IP_CKSUM) + inner_l3_offset += m->outer_l2_len + m->outer_l3_len; + + /* Headers are fragmented */ + if (rte_pktmbuf_data_len(m) < inner_l3_offset + m->l3_len + m->l4_len) + return -ENOTSUP; + + /* IP checksum can be counted only for IPv4 packet */ + if ((ol_flags & PKT_TX_IP_CKSUM) && (ol_flags & PKT_TX_IPV6)) + return -EINVAL; + + /* IP type not set when required */ + if (ol_flags & (PKT_TX_L4_MASK | PKT_TX_TCP_SEG)) + if (!(ol_flags & (PKT_TX_IPV4 | PKT_TX_IPV6))) + return -EINVAL; + + /* Check requirements for TSO packet */ + if (ol_flags & PKT_TX_TCP_SEG) + if ((m->tso_segsz == 0) || + ((ol_flags & PKT_TX_IPV4) && + !(ol_flags & PKT_TX_IP_CKSUM))) + return -EINVAL; + + /* PKT_TX_OUTER_IP_CKSUM set for non outer IPv4 packet. */ + if ((ol_flags & PKT_TX_OUTER_IP_CKSUM) && + !(ol_flags & PKT_TX_OUTER_IPV4)) + return -EINVAL; + + return 0; +} + +/** + * Linearize data in mbuf. + * + * This function moves the mbuf data in the first segment if there is enough + * tailroom. The subsequent segments are unchained and freed. + * + * @param mbuf + * mbuf to linearize + * @return + * - 0, on success + * - -1, on error + */ +static inline int +rte_pktmbuf_linearize(struct rte_mbuf *mbuf) +{ + int seg_len, copy_len; + struct rte_mbuf *m; + struct rte_mbuf *m_next; + char *buffer; + + if (rte_pktmbuf_is_contiguous(mbuf)) + return 0; + + /* Extend first segment to the total packet length */ + copy_len = rte_pktmbuf_pkt_len(mbuf) - rte_pktmbuf_data_len(mbuf); + + if (unlikely(copy_len > rte_pktmbuf_tailroom(mbuf))) + return -1; + + buffer = rte_pktmbuf_mtod_offset(mbuf, char *, mbuf->data_len); + mbuf->data_len = (uint16_t)(mbuf->pkt_len); + + /* Append data from next segments to the first one */ + m = mbuf->next; + while (m != NULL) { + m_next = m->next; + + seg_len = rte_pktmbuf_data_len(m); + rte_memcpy(buffer, rte_pktmbuf_mtod(m, char *), seg_len); + buffer += seg_len; + + rte_pktmbuf_free_seg(m); + m = m_next; + } + + mbuf->next = NULL; + mbuf->nb_segs = 1; + + return 0; +} + +/** + * Dump an mbuf structure to a file. * * Dump all fields for the given packet mbuf and all its associated * segments (in the case of a chained buffer).