X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=lib%2Flibrte_mempool%2Frte_mempool.h;h=fb7052e1452313f801d526c826201250e2b29933;hb=a0fd91cefcc054b770dec6d8fb60db0d3145c45a;hp=67d7f09bc716e5537462bc642bca024233881145;hpb=b6df9fc8715f9a925136006b18fdd65f9c621757;p=dpdk.git diff --git a/lib/librte_mempool/rte_mempool.h b/lib/librte_mempool/rte_mempool.h index 67d7f09bc7..fb7052e145 100644 --- a/lib/librte_mempool/rte_mempool.h +++ b/lib/librte_mempool/rte_mempool.h @@ -1,35 +1,35 @@ /*- * BSD LICENSE - * - * Copyright(c) 2010-2013 Intel Corporation. All rights reserved. + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * Copyright(c) 2016 6WIND S.A. * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions * are met: - * - * * Redistributions of source code must retain the above copyright + * + * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * */ #ifndef _RTE_MEMPOOL_H_ @@ -60,18 +60,21 @@ * that won't work as rte_lcore_id() will not return a correct value. */ +#include #include #include #include #include #include +#include #include #include #include #include #include #include +#include #ifdef __cplusplus extern "C" { @@ -95,46 +98,147 @@ struct rte_mempool_debug_stats { } __rte_cache_aligned; #endif -#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0 /** * A structure that stores a per-core object cache. */ struct rte_mempool_cache { - unsigned len; /**< Cache len */ + uint32_t size; /**< Size of the cache */ + uint32_t flushthresh; /**< Threshold before we flush excess elements */ + uint32_t len; /**< Current cache count */ /* * Cache is allocated to this size to allow it to overflow in certain * cases to avoid needless emptying of cache. */ void *objs[RTE_MEMPOOL_CACHE_MAX_SIZE * 3]; /**< Cache objects */ } __rte_cache_aligned; -#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */ + +/** + * A structure that stores the size of mempool elements. + */ +struct rte_mempool_objsz { + uint32_t elt_size; /**< Size of an element. */ + uint32_t header_size; /**< Size of header (before elt). */ + uint32_t trailer_size; /**< Size of trailer (after elt). */ + uint32_t total_size; + /**< Total size of an object (header + elt + trailer). */ +}; #define RTE_MEMPOOL_NAMESIZE 32 /**< Maximum length of a memory pool. */ +#define RTE_MEMPOOL_MZ_PREFIX "MP_" + +/* "MP_" */ +#define RTE_MEMPOOL_MZ_FORMAT RTE_MEMPOOL_MZ_PREFIX "%s" + +#define MEMPOOL_PG_SHIFT_MAX (sizeof(uintptr_t) * CHAR_BIT - 1) + +/** Mempool over one chunk of physically continuous memory */ +#define MEMPOOL_PG_NUM_DEFAULT 1 + +#ifndef RTE_MEMPOOL_ALIGN +#define RTE_MEMPOOL_ALIGN RTE_CACHE_LINE_SIZE +#endif + +#define RTE_MEMPOOL_ALIGN_MASK (RTE_MEMPOOL_ALIGN - 1) + +/** + * Mempool object header structure + * + * Each object stored in mempools are prefixed by this header structure, + * it allows to retrieve the mempool pointer from the object and to + * iterate on all objects attached to a mempool. When debug is enabled, + * a cookie is also added in this structure preventing corruptions and + * double-frees. + */ +struct rte_mempool_objhdr { + STAILQ_ENTRY(rte_mempool_objhdr) next; /**< Next in list. */ + struct rte_mempool *mp; /**< The mempool owning the object. */ + phys_addr_t physaddr; /**< Physical address of the object. */ +#ifdef RTE_LIBRTE_MEMPOOL_DEBUG + uint64_t cookie; /**< Debug cookie. */ +#endif +}; + +/** + * A list of object headers type + */ +STAILQ_HEAD(rte_mempool_objhdr_list, rte_mempool_objhdr); + +/** + * Mempool object trailer structure + * + * In debug mode, each object stored in mempools are suffixed by this + * trailer structure containing a cookie preventing memory corruptions. + */ +struct rte_mempool_objtlr { +#ifdef RTE_LIBRTE_MEMPOOL_DEBUG + uint64_t cookie; /**< Debug cookie. */ +#endif +}; + +/** + * A list of memory where objects are stored + */ +STAILQ_HEAD(rte_mempool_memhdr_list, rte_mempool_memhdr); + +/** + * Callback used to free a memory chunk + */ +typedef void (rte_mempool_memchunk_free_cb_t)(struct rte_mempool_memhdr *memhdr, + void *opaque); + +/** + * Mempool objects memory header structure + * + * The memory chunks where objects are stored. Each chunk is virtually + * and physically contiguous. + */ +struct rte_mempool_memhdr { + STAILQ_ENTRY(rte_mempool_memhdr) next; /**< Next in list. */ + struct rte_mempool *mp; /**< The mempool owning the chunk */ + void *addr; /**< Virtual address of the chunk */ + phys_addr_t phys_addr; /**< Physical address of the chunk */ + size_t len; /**< length of the chunk */ + rte_mempool_memchunk_free_cb_t *free_cb; /**< Free callback */ + void *opaque; /**< Argument passed to the free callback */ +}; /** * The RTE mempool structure. */ struct rte_mempool { - TAILQ_ENTRY(rte_mempool) next; /**< Next in list. */ - char name[RTE_MEMPOOL_NAMESIZE]; /**< Name of mempool. */ - struct rte_ring *ring; /**< Ring to store objects. */ - phys_addr_t phys_addr; /**< Phys. addr. of mempool struct. */ + union { + void *pool_data; /**< Ring or pool to store objects. */ + uint64_t pool_id; /**< External mempool identifier. */ + }; + void *pool_config; /**< optional args for ops alloc. */ + const struct rte_memzone *mz; /**< Memzone where pool is alloc'd. */ int flags; /**< Flags of the mempool. */ - uint32_t size; /**< Size of the mempool. */ - uint32_t cache_size; /**< Size of per-lcore local cache. */ - uint32_t cache_flushthresh; /**< Threshold before we flush excess elements. */ + int socket_id; /**< Socket id passed at create. */ + uint32_t size; /**< Max size of the mempool. */ + uint32_t cache_size; + /**< Size of per-lcore default local cache. */ uint32_t elt_size; /**< Size of an element. */ uint32_t header_size; /**< Size of header (before elt). */ uint32_t trailer_size; /**< Size of trailer (after elt). */ unsigned private_data_size; /**< Size of private data. */ + /** + * Index into rte_mempool_ops_table array of mempool ops + * structs, which contain callback function pointers. + * We're using an index here rather than pointers to the callbacks + * to facilitate any secondary processes that may want to use + * this mempool. + */ + int32_t ops_index; -#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0 - /** Per-lcore local cache. */ - struct rte_mempool_cache local_cache[RTE_MAX_LCORE]; -#endif + struct rte_mempool_cache *local_cache; /**< Per-lcore local cache */ + + uint32_t populated_size; /**< Number of populated objects. */ + struct rte_mempool_objhdr_list elt_list; /**< List of objects in pool */ + uint32_t nb_mem_chunks; /**< Number of memory chunks */ + struct rte_mempool_memhdr_list mem_list; /**< List of memory chunks */ #ifdef RTE_LIBRTE_MEMPOOL_DEBUG /** Per-lcore statistics. */ @@ -142,13 +246,16 @@ struct rte_mempool { #endif } __rte_cache_aligned; -#define MEMPOOL_F_NO_SPREAD 0x0001 /**< Do not spread in memory. */ +#define MEMPOOL_F_NO_SPREAD 0x0001 /**< Do not spread among memory channels. */ #define MEMPOOL_F_NO_CACHE_ALIGN 0x0002 /**< Do not align objs on cache lines.*/ #define MEMPOOL_F_SP_PUT 0x0004 /**< Default put is "single-producer".*/ #define MEMPOOL_F_SC_GET 0x0008 /**< Default get is "single-consumer".*/ +#define MEMPOOL_F_POOL_CREATED 0x0010 /**< Internal: pool is created. */ +#define MEMPOOL_F_NO_PHYS_CONTIG 0x0020 /**< Don't need physically contiguous objs. */ /** * @internal When debug is enabled, store some statistics. + * * @param mp * Pointer to the memory pool. * @param name @@ -157,33 +264,34 @@ struct rte_mempool { * Number to add to the object-oriented statistics. */ #ifdef RTE_LIBRTE_MEMPOOL_DEBUG -#define __MEMPOOL_STAT_ADD(mp, name, n) do { \ - unsigned __lcore_id = rte_lcore_id(); \ - mp->stats[__lcore_id].name##_objs += n; \ - mp->stats[__lcore_id].name##_bulk += 1; \ +#define __MEMPOOL_STAT_ADD(mp, name, n) do { \ + unsigned __lcore_id = rte_lcore_id(); \ + if (__lcore_id < RTE_MAX_LCORE) { \ + mp->stats[__lcore_id].name##_objs += n; \ + mp->stats[__lcore_id].name##_bulk += 1; \ + } \ } while(0) #else #define __MEMPOOL_STAT_ADD(mp, name, n) do {} while(0) #endif /** - * @internal Get a pointer to a mempool pointer in the object header. - * @param obj - * Pointer to object. - * @return - * The pointer to the mempool from which the object was allocated. + * Calculate the size of the mempool header. + * + * @param mp + * Pointer to the memory pool. + * @param cs + * Size of the per-lcore cache. */ -static inline struct rte_mempool **__mempool_from_obj(void *obj) -{ - struct rte_mempool **mpp; - unsigned off; +#define MEMPOOL_HEADER_SIZE(mp, cs) \ + (sizeof(*(mp)) + (((cs) == 0) ? 0 : \ + (sizeof(struct rte_mempool_cache) * RTE_MAX_LCORE))) - off = sizeof(struct rte_mempool *); -#ifdef RTE_LIBRTE_MEMPOOL_DEBUG - off += sizeof(uint64_t); -#endif - mpp = (struct rte_mempool **)((char *)obj - off); - return mpp; +/* return the header of a mempool object (internal) */ +static inline struct rte_mempool_objhdr *__mempool_get_header(void *obj) +{ + return (struct rte_mempool_objhdr *)RTE_PTR_SUB(obj, + sizeof(struct rte_mempool_objhdr)); } /** @@ -195,48 +303,18 @@ static inline struct rte_mempool **__mempool_from_obj(void *obj) * @return * A pointer to the mempool structure. */ -static inline const struct rte_mempool *rte_mempool_from_obj(void *obj) -{ - struct rte_mempool * const *mpp; - mpp = __mempool_from_obj(obj); - return *mpp; -} - -#ifdef RTE_LIBRTE_MEMPOOL_DEBUG -/* get header cookie value */ -static inline uint64_t __mempool_read_header_cookie(const void *obj) -{ - return *(const uint64_t *)((const char *)obj - sizeof(uint64_t)); -} - -/* get trailer cookie value */ -static inline uint64_t __mempool_read_trailer_cookie(void *obj) -{ - struct rte_mempool **mpp = __mempool_from_obj(obj); - return *(uint64_t *)((char *)obj + (*mpp)->elt_size); -} - -/* write header cookie value */ -static inline void __mempool_write_header_cookie(void *obj, int free) +static inline struct rte_mempool *rte_mempool_from_obj(void *obj) { - uint64_t *cookie_p; - cookie_p = (uint64_t *)((char *)obj - sizeof(uint64_t)); - if (free == 0) - *cookie_p = RTE_MEMPOOL_HEADER_COOKIE1; - else - *cookie_p = RTE_MEMPOOL_HEADER_COOKIE2; - + struct rte_mempool_objhdr *hdr = __mempool_get_header(obj); + return hdr->mp; } -/* write trailer cookie value */ -static inline void __mempool_write_trailer_cookie(void *obj) +/* return the trailer of a mempool object (internal) */ +static inline struct rte_mempool_objtlr *__mempool_get_trailer(void *obj) { - uint64_t *cookie_p; - struct rte_mempool **mpp = __mempool_from_obj(obj); - cookie_p = (uint64_t *)((char *)obj + (*mpp)->elt_size); - *cookie_p = RTE_MEMPOOL_TRAILER_COOKIE; + struct rte_mempool *mp = rte_mempool_from_obj(obj); + return (struct rte_mempool_objtlr *)RTE_PTR_ADD(obj, mp->elt_size); } -#endif /* RTE_LIBRTE_MEMPOOL_DEBUG */ /** * @internal Check and update cookies or panic. @@ -252,89 +330,242 @@ static inline void __mempool_write_trailer_cookie(void *obj) * - 1: object is supposed to be free, mark it as allocated * - 2: just check that cookie is valid (free or allocated) */ +void rte_mempool_check_cookies(const struct rte_mempool *mp, + void * const *obj_table_const, unsigned n, int free); + #ifdef RTE_LIBRTE_MEMPOOL_DEBUG -#ifndef __INTEL_COMPILER -#pragma GCC diagnostic ignored "-Wcast-qual" -#endif -static inline void __mempool_check_cookies(const struct rte_mempool *mp, - void * const *obj_table_const, - unsigned n, int free) -{ - uint64_t cookie; - void *tmp; - void *obj; - void **obj_table; - - /* Force to drop the "const" attribute. This is done only when - * DEBUG is enabled */ - tmp = (void *) obj_table_const; - obj_table = (void **) tmp; - - while (n--) { - obj = obj_table[n]; - - if (rte_mempool_from_obj(obj) != mp) - rte_panic("MEMPOOL: object is owned by another " - "mempool\n"); - - cookie = __mempool_read_header_cookie(obj); - - if (free == 0) { - if (cookie != RTE_MEMPOOL_HEADER_COOKIE1) { - rte_log_set_history(0); - RTE_LOG(CRIT, MEMPOOL, - "obj=%p, mempool=%p, cookie=%"PRIx64"\n", - obj, mp, cookie); - rte_panic("MEMPOOL: bad header cookie (put)\n"); - } - __mempool_write_header_cookie(obj, 1); - } - else if (free == 1) { - if (cookie != RTE_MEMPOOL_HEADER_COOKIE2) { - rte_log_set_history(0); - RTE_LOG(CRIT, MEMPOOL, - "obj=%p, mempool=%p, cookie=%"PRIx64"\n", - obj, mp, cookie); - rte_panic("MEMPOOL: bad header cookie (get)\n"); - } - __mempool_write_header_cookie(obj, 0); - } - else if (free == 2) { - if (cookie != RTE_MEMPOOL_HEADER_COOKIE1 && - cookie != RTE_MEMPOOL_HEADER_COOKIE2) { - rte_log_set_history(0); - RTE_LOG(CRIT, MEMPOOL, - "obj=%p, mempool=%p, cookie=%"PRIx64"\n", - obj, mp, cookie); - rte_panic("MEMPOOL: bad header cookie (audit)\n"); - } - } - cookie = __mempool_read_trailer_cookie(obj); - if (cookie != RTE_MEMPOOL_TRAILER_COOKIE) { - rte_log_set_history(0); - RTE_LOG(CRIT, MEMPOOL, - "obj=%p, mempool=%p, cookie=%"PRIx64"\n", - obj, mp, cookie); - rte_panic("MEMPOOL: bad trailer cookie\n"); - } - } -} -#ifndef __INTEL_COMPILER -#pragma GCC diagnostic error "-Wcast-qual" -#endif +#define __mempool_check_cookies(mp, obj_table_const, n, free) \ + rte_mempool_check_cookies(mp, obj_table_const, n, free) #else #define __mempool_check_cookies(mp, obj_table_const, n, free) do {} while(0) #endif /* RTE_LIBRTE_MEMPOOL_DEBUG */ +#define RTE_MEMPOOL_OPS_NAMESIZE 32 /**< Max length of ops struct name. */ + /** - * An object constructor callback function for mempool. + * Prototype for implementation specific data provisioning function. * - * Arguments are the mempool, the opaque pointer given by the user in - * rte_mempool_create(), the pointer to the element and the index of - * the element in the pool. + * The function should provide the implementation specific memory for + * for use by the other mempool ops functions in a given mempool ops struct. + * E.g. the default ops provides an instance of the rte_ring for this purpose. + * it will most likely point to a different type of data structure, and + * will be transparent to the application programmer. + * This function should set mp->pool_data. + */ +typedef int (*rte_mempool_alloc_t)(struct rte_mempool *mp); + +/** + * Free the opaque private data pointed to by mp->pool_data pointer. */ -typedef void (rte_mempool_obj_ctor_t)(struct rte_mempool *, void *, - void *, unsigned); +typedef void (*rte_mempool_free_t)(struct rte_mempool *mp); + +/** + * Enqueue an object into the external pool. + */ +typedef int (*rte_mempool_enqueue_t)(struct rte_mempool *mp, + void * const *obj_table, unsigned int n); + +/** + * Dequeue an object from the external pool. + */ +typedef int (*rte_mempool_dequeue_t)(struct rte_mempool *mp, + void **obj_table, unsigned int n); + +/** + * Return the number of available objects in the external pool. + */ +typedef unsigned (*rte_mempool_get_count)(const struct rte_mempool *mp); + +/** Structure defining mempool operations structure */ +struct rte_mempool_ops { + char name[RTE_MEMPOOL_OPS_NAMESIZE]; /**< Name of mempool ops struct. */ + rte_mempool_alloc_t alloc; /**< Allocate private data. */ + rte_mempool_free_t free; /**< Free the external pool. */ + rte_mempool_enqueue_t enqueue; /**< Enqueue an object. */ + rte_mempool_dequeue_t dequeue; /**< Dequeue an object. */ + rte_mempool_get_count get_count; /**< Get qty of available objs. */ +} __rte_cache_aligned; + +#define RTE_MEMPOOL_MAX_OPS_IDX 16 /**< Max registered ops structs */ + +/** + * Structure storing the table of registered ops structs, each of which contain + * the function pointers for the mempool ops functions. + * Each process has its own storage for this ops struct array so that + * the mempools can be shared across primary and secondary processes. + * The indices used to access the array are valid across processes, whereas + * any function pointers stored directly in the mempool struct would not be. + * This results in us simply having "ops_index" in the mempool struct. + */ +struct rte_mempool_ops_table { + rte_spinlock_t sl; /**< Spinlock for add/delete. */ + uint32_t num_ops; /**< Number of used ops structs in the table. */ + /** + * Storage for all possible ops structs. + */ + struct rte_mempool_ops ops[RTE_MEMPOOL_MAX_OPS_IDX]; +} __rte_cache_aligned; + +/** Array of registered ops structs. */ +extern struct rte_mempool_ops_table rte_mempool_ops_table; + +/** + * @internal Get the mempool ops struct from its index. + * + * @param ops_index + * The index of the ops struct in the ops struct table. It must be a valid + * index: (0 <= idx < num_ops). + * @return + * The pointer to the ops struct in the table. + */ +static inline struct rte_mempool_ops * +rte_mempool_get_ops(int ops_index) +{ + RTE_VERIFY((ops_index >= 0) && (ops_index < RTE_MEMPOOL_MAX_OPS_IDX)); + + return &rte_mempool_ops_table.ops[ops_index]; +} + +/** + * @internal Wrapper for mempool_ops alloc callback. + * + * @param mp + * Pointer to the memory pool. + * @return + * - 0: Success; successfully allocated mempool pool_data. + * - <0: Error; code of alloc function. + */ +int +rte_mempool_ops_alloc(struct rte_mempool *mp); + +/** + * @internal Wrapper for mempool_ops dequeue callback. + * + * @param mp + * Pointer to the memory pool. + * @param obj_table + * Pointer to a table of void * pointers (objects). + * @param n + * Number of objects to get. + * @return + * - 0: Success; got n objects. + * - <0: Error; code of dequeue function. + */ +static inline int +rte_mempool_ops_dequeue_bulk(struct rte_mempool *mp, + void **obj_table, unsigned n) +{ + struct rte_mempool_ops *ops; + + ops = rte_mempool_get_ops(mp->ops_index); + return ops->dequeue(mp, obj_table, n); +} + +/** + * @internal wrapper for mempool_ops enqueue callback. + * + * @param mp + * Pointer to the memory pool. + * @param obj_table + * Pointer to a table of void * pointers (objects). + * @param n + * Number of objects to put. + * @return + * - 0: Success; n objects supplied. + * - <0: Error; code of enqueue function. + */ +static inline int +rte_mempool_ops_enqueue_bulk(struct rte_mempool *mp, void * const *obj_table, + unsigned n) +{ + struct rte_mempool_ops *ops; + + ops = rte_mempool_get_ops(mp->ops_index); + return ops->enqueue(mp, obj_table, n); +} + +/** + * @internal wrapper for mempool_ops get_count callback. + * + * @param mp + * Pointer to the memory pool. + * @return + * The number of available objects in the external pool. + */ +unsigned +rte_mempool_ops_get_count(const struct rte_mempool *mp); + +/** + * @internal wrapper for mempool_ops free callback. + * + * @param mp + * Pointer to the memory pool. + */ +void +rte_mempool_ops_free(struct rte_mempool *mp); + +/** + * Set the ops of a mempool. + * + * This can only be done on a mempool that is not populated, i.e. just after + * a call to rte_mempool_create_empty(). + * + * @param mp + * Pointer to the memory pool. + * @param name + * Name of the ops structure to use for this mempool. + * @param pool_config + * Opaque data that can be passed by the application to the ops functions. + * @return + * - 0: Success; the mempool is now using the requested ops functions. + * - -EINVAL - Invalid ops struct name provided. + * - -EEXIST - mempool already has an ops struct assigned. + */ +int +rte_mempool_set_ops_byname(struct rte_mempool *mp, const char *name, + void *pool_config); + +/** + * Register mempool operations. + * + * @param ops + * Pointer to an ops structure to register. + * @return + * - >=0: Success; return the index of the ops struct in the table. + * - -EINVAL - some missing callbacks while registering ops struct. + * - -ENOSPC - the maximum number of ops structs has been reached. + */ +int rte_mempool_register_ops(const struct rte_mempool_ops *ops); + +/** + * Macro to statically register the ops of a mempool handler. + * Note that the rte_mempool_register_ops fails silently here when + * more then RTE_MEMPOOL_MAX_OPS_IDX is registered. + */ +#define MEMPOOL_REGISTER_OPS(ops) \ + void mp_hdlr_init_##ops(void); \ + void __attribute__((constructor, used)) mp_hdlr_init_##ops(void)\ + { \ + rte_mempool_register_ops(&ops); \ + } + +/** + * An object callback function for mempool. + * + * Used by rte_mempool_create() and rte_mempool_obj_iter(). + */ +typedef void (rte_mempool_obj_cb_t)(struct rte_mempool *mp, + void *opaque, void *obj, unsigned obj_idx); +typedef rte_mempool_obj_cb_t rte_mempool_obj_ctor_t; /* compat */ + +/** + * A memory callback function for mempool. + * + * Used by rte_mempool_mem_iter(). + */ +typedef void (rte_mempool_mem_cb_t)(struct rte_mempool *mp, + void *opaque, struct rte_mempool_memhdr *memhdr, + unsigned mem_idx); /** * A mempool constructor callback function. @@ -345,10 +576,12 @@ typedef void (rte_mempool_obj_ctor_t)(struct rte_mempool *, void *, typedef void (rte_mempool_ctor_t)(struct rte_mempool *, void *); /** - * Creates a new mempool named *name* in memory. + * Create a new mempool named *name* in memory. * * This function uses ``memzone_reserve()`` to allocate memory. The * pool contains n elements of elt_size. Its size is set to n. + * All elements of the mempool are allocated together with the mempool header, + * in one physically continuous chunk of memory. * * @param name * The name of the mempool. @@ -362,13 +595,13 @@ typedef void (rte_mempool_ctor_t)(struct rte_mempool *, void *); * If cache_size is non-zero, the rte_mempool library will try to * limit the accesses to the common lockless pool, by maintaining a * per-lcore object cache. This argument must be lower or equal to - * CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE. It is advised to choose + * CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE and n / 1.5. It is advised to choose * cache_size to have "n modulo cache_size == 0": if this is * not the case, some elements will always stay in the pool and will * never be used. The access to the per-lcore table is of course * faster than the multi-producer/consumer pool. The cache can be * disabled if the cache_size argument is set to 0; it can be useful to - * avoid loosing objects in cache. Note that even if not used, the + * avoid losing objects in cache. Note that even if not used, the * memory space for cache is always reserved in a mempool structure, * except if CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE is set to 0. * @param private_data_size @@ -413,12 +646,13 @@ typedef void (rte_mempool_ctor_t)(struct rte_mempool *, void *); * - MEMPOOL_F_SC_GET: If this flag is set, the default behavior * when using rte_mempool_get() or rte_mempool_get_bulk() is * "single-consumer". Otherwise, it is "multi-consumers". + * - MEMPOOL_F_NO_PHYS_CONTIG: If set, allocated objects won't + * necessarilly be contiguous in physical memory. * @return * The pointer to the new allocated mempool, on success. NULL on error * with rte_errno set appropriately. Possible rte_errno values include: * - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure * - E_RTE_SECONDARY - function was called from a secondary process instance - * - E_RTE_NO_TAILQ - no tailq list could be got for the ring or mempool list * - EINVAL - cache size provided is too large * - ENOSPC - the maximum number of memzones has already been allocated * - EEXIST - a memzone with the same name already exists @@ -428,16 +662,353 @@ struct rte_mempool * rte_mempool_create(const char *name, unsigned n, unsigned elt_size, unsigned cache_size, unsigned private_data_size, rte_mempool_ctor_t *mp_init, void *mp_init_arg, - rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg, + rte_mempool_obj_cb_t *obj_init, void *obj_init_arg, int socket_id, unsigned flags); +/** + * Create a new mempool named *name* in memory. + * + * The pool contains n elements of elt_size. Its size is set to n. + * This function uses ``memzone_reserve()`` to allocate the mempool header + * (and the objects if vaddr is NULL). + * Depending on the input parameters, mempool elements can be either allocated + * together with the mempool header, or an externally provided memory buffer + * could be used to store mempool objects. In later case, that external + * memory buffer can consist of set of disjoint physical pages. + * + * @param name + * The name of the mempool. + * @param n + * The number of elements in the mempool. The optimum size (in terms of + * memory usage) for a mempool is when n is a power of two minus one: + * n = (2^q - 1). + * @param elt_size + * The size of each element. + * @param cache_size + * Size of the cache. See rte_mempool_create() for details. + * @param private_data_size + * The size of the private data appended after the mempool + * structure. This is useful for storing some private data after the + * mempool structure, as is done for rte_mbuf_pool for example. + * @param mp_init + * A function pointer that is called for initialization of the pool, + * before object initialization. The user can initialize the private + * data in this function if needed. This parameter can be NULL if + * not needed. + * @param mp_init_arg + * An opaque pointer to data that can be used in the mempool + * constructor function. + * @param obj_init + * A function called for each object at initialization of the pool. + * See rte_mempool_create() for details. + * @param obj_init_arg + * An opaque pointer passed to the object constructor function. + * @param socket_id + * The *socket_id* argument is the socket identifier in the case of + * NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA + * constraint for the reserved zone. + * @param flags + * Flags controlling the behavior of the mempool. See + * rte_mempool_create() for details. + * @param vaddr + * Virtual address of the externally allocated memory buffer. + * Will be used to store mempool objects. + * @param paddr + * Array of physical addresses of the pages that comprises given memory + * buffer. + * @param pg_num + * Number of elements in the paddr array. + * @param pg_shift + * LOG2 of the physical pages size. + * @return + * The pointer to the new allocated mempool, on success. NULL on error + * with rte_errno set appropriately. See rte_mempool_create() for details. + */ +struct rte_mempool * +rte_mempool_xmem_create(const char *name, unsigned n, unsigned elt_size, + unsigned cache_size, unsigned private_data_size, + rte_mempool_ctor_t *mp_init, void *mp_init_arg, + rte_mempool_obj_cb_t *obj_init, void *obj_init_arg, + int socket_id, unsigned flags, void *vaddr, + const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift); + +/** + * Create an empty mempool + * + * The mempool is allocated and initialized, but it is not populated: no + * memory is allocated for the mempool elements. The user has to call + * rte_mempool_populate_*() or to add memory chunks to the pool. Once + * populated, the user may also want to initialize each object with + * rte_mempool_obj_iter(). + * + * @param name + * The name of the mempool. + * @param n + * The maximum number of elements that can be added in the mempool. + * The optimum size (in terms of memory usage) for a mempool is when n + * is a power of two minus one: n = (2^q - 1). + * @param elt_size + * The size of each element. + * @param cache_size + * Size of the cache. See rte_mempool_create() for details. + * @param private_data_size + * The size of the private data appended after the mempool + * structure. This is useful for storing some private data after the + * mempool structure, as is done for rte_mbuf_pool for example. + * @param socket_id + * The *socket_id* argument is the socket identifier in the case of + * NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA + * constraint for the reserved zone. + * @param flags + * Flags controlling the behavior of the mempool. See + * rte_mempool_create() for details. + * @return + * The pointer to the new allocated mempool, on success. NULL on error + * with rte_errno set appropriately. See rte_mempool_create() for details. + */ +struct rte_mempool * +rte_mempool_create_empty(const char *name, unsigned n, unsigned elt_size, + unsigned cache_size, unsigned private_data_size, + int socket_id, unsigned flags); +/** + * Free a mempool + * + * Unlink the mempool from global list, free the memory chunks, and all + * memory referenced by the mempool. The objects must not be used by + * other cores as they will be freed. + * + * @param mp + * A pointer to the mempool structure. + */ +void +rte_mempool_free(struct rte_mempool *mp); + +/** + * Add physically contiguous memory for objects in the pool at init + * + * Add a virtually and physically contiguous memory chunk in the pool + * where objects can be instanciated. + * + * @param mp + * A pointer to the mempool structure. + * @param vaddr + * The virtual address of memory that should be used to store objects. + * @param paddr + * The physical address + * @param len + * The length of memory in bytes. + * @param free_cb + * The callback used to free this chunk when destroying the mempool. + * @param opaque + * An opaque argument passed to free_cb. + * @return + * The number of objects added on success. + * On error, the chunk is not added in the memory list of the + * mempool and a negative errno is returned. + */ +int rte_mempool_populate_phys(struct rte_mempool *mp, char *vaddr, + phys_addr_t paddr, size_t len, rte_mempool_memchunk_free_cb_t *free_cb, + void *opaque); + +/** + * Add physical memory for objects in the pool at init + * + * Add a virtually contiguous memory chunk in the pool where objects can + * be instanciated. The physical addresses corresponding to the virtual + * area are described in paddr[], pg_num, pg_shift. + * + * @param mp + * A pointer to the mempool structure. + * @param vaddr + * The virtual address of memory that should be used to store objects. + * @param paddr + * An array of physical addresses of each page composing the virtual + * area. + * @param pg_num + * Number of elements in the paddr array. + * @param pg_shift + * LOG2 of the physical pages size. + * @param free_cb + * The callback used to free this chunk when destroying the mempool. + * @param opaque + * An opaque argument passed to free_cb. + * @return + * The number of objects added on success. + * On error, the chunks are not added in the memory list of the + * mempool and a negative errno is returned. + */ +int rte_mempool_populate_phys_tab(struct rte_mempool *mp, char *vaddr, + const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift, + rte_mempool_memchunk_free_cb_t *free_cb, void *opaque); + +/** + * Add virtually contiguous memory for objects in the pool at init + * + * Add a virtually contiguous memory chunk in the pool where objects can + * be instanciated. + * + * @param mp + * A pointer to the mempool structure. + * @param addr + * The virtual address of memory that should be used to store objects. + * Must be page-aligned. + * @param len + * The length of memory in bytes. Must be page-aligned. + * @param pg_sz + * The size of memory pages in this virtual area. + * @param free_cb + * The callback used to free this chunk when destroying the mempool. + * @param opaque + * An opaque argument passed to free_cb. + * @return + * The number of objects added on success. + * On error, the chunk is not added in the memory list of the + * mempool and a negative errno is returned. + */ +int +rte_mempool_populate_virt(struct rte_mempool *mp, char *addr, + size_t len, size_t pg_sz, rte_mempool_memchunk_free_cb_t *free_cb, + void *opaque); + +/** + * Add memory for objects in the pool at init + * + * This is the default function used by rte_mempool_create() to populate + * the mempool. It adds memory allocated using rte_memzone_reserve(). + * + * @param mp + * A pointer to the mempool structure. + * @return + * The number of objects added on success. + * On error, the chunk is not added in the memory list of the + * mempool and a negative errno is returned. + */ +int rte_mempool_populate_default(struct rte_mempool *mp); + +/** + * Add memory from anonymous mapping for objects in the pool at init + * + * This function mmap an anonymous memory zone that is locked in + * memory to store the objects of the mempool. + * + * @param mp + * A pointer to the mempool structure. + * @return + * The number of objects added on success. + * On error, the chunk is not added in the memory list of the + * mempool and a negative errno is returned. + */ +int rte_mempool_populate_anon(struct rte_mempool *mp); + +/** + * Call a function for each mempool element + * + * Iterate across all objects attached to a rte_mempool and call the + * callback function on it. + * + * @param mp + * A pointer to an initialized mempool. + * @param obj_cb + * A function pointer that is called for each object. + * @param obj_cb_arg + * An opaque pointer passed to the callback function. + * @return + * Number of objects iterated. + */ +uint32_t rte_mempool_obj_iter(struct rte_mempool *mp, + rte_mempool_obj_cb_t *obj_cb, void *obj_cb_arg); + +/** + * Call a function for each mempool memory chunk + * + * Iterate across all memory chunks attached to a rte_mempool and call + * the callback function on it. + * + * @param mp + * A pointer to an initialized mempool. + * @param mem_cb + * A function pointer that is called for each memory chunk. + * @param mem_cb_arg + * An opaque pointer passed to the callback function. + * @return + * Number of memory chunks iterated. + */ +uint32_t rte_mempool_mem_iter(struct rte_mempool *mp, + rte_mempool_mem_cb_t *mem_cb, void *mem_cb_arg); + /** * Dump the status of the mempool to the console. * + * @param f + * A pointer to a file for output * @param mp * A pointer to the mempool structure. */ -void rte_mempool_dump(const struct rte_mempool *mp); +void rte_mempool_dump(FILE *f, struct rte_mempool *mp); + +/** + * Create a user-owned mempool cache. + * + * This can be used by non-EAL threads to enable caching when they + * interact with a mempool. + * + * @param size + * The size of the mempool cache. See rte_mempool_create()'s cache_size + * parameter description for more information. The same limits and + * considerations apply here too. + * @param socket_id + * The socket identifier in the case of NUMA. The value can be + * SOCKET_ID_ANY if there is no NUMA constraint for the reserved zone. + */ +struct rte_mempool_cache * +rte_mempool_cache_create(uint32_t size, int socket_id); + +/** + * Free a user-owned mempool cache. + * + * @param cache + * A pointer to the mempool cache. + */ +void +rte_mempool_cache_free(struct rte_mempool_cache *cache); + +/** + * Flush a user-owned mempool cache to the specified mempool. + * + * @param cache + * A pointer to the mempool cache. + * @param mp + * A pointer to the mempool. + */ +static inline void __attribute__((always_inline)) +rte_mempool_cache_flush(struct rte_mempool_cache *cache, + struct rte_mempool *mp) +{ + rte_mempool_ops_enqueue_bulk(mp, cache->objs, cache->len); + cache->len = 0; +} + +/** + * Get a pointer to the per-lcore default mempool cache. + * + * @param mp + * A pointer to the mempool structure. + * @param lcore_id + * The logical core id. + * @return + * A pointer to the mempool cache or NULL if disabled or non-EAL thread. + */ +static inline struct rte_mempool_cache *__attribute__((always_inline)) +rte_mempool_default_cache(struct rte_mempool *mp, unsigned lcore_id) +{ + if (mp->cache_size == 0) + return NULL; + + if (lcore_id >= RTE_MAX_LCORE) + return NULL; + + return &mp->local_cache[lcore_id]; +} /** * @internal Put several objects back in the mempool; used internally. @@ -448,35 +1019,29 @@ void rte_mempool_dump(const struct rte_mempool *mp); * @param n * The number of objects to store back in the mempool, must be strictly * positive. - * @param is_mp - * Mono-producer (0) or multi-producers (1). + * @param cache + * A pointer to a mempool cache structure. May be NULL if not needed. + * @param flags + * The flags used for the mempool creation. + * Single-producer (MEMPOOL_F_SP_PUT flag) or multi-producers. */ -static inline void -__mempool_put_bulk(struct rte_mempool *mp, void * const *obj_table, - unsigned n, int is_mp) +static inline void __attribute__((always_inline)) +__mempool_generic_put(struct rte_mempool *mp, void * const *obj_table, + unsigned n, struct rte_mempool_cache *cache, int flags) { -#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0 - struct rte_mempool_cache *cache; - uint32_t index; void **cache_objs; - unsigned lcore_id = rte_lcore_id(); - uint32_t cache_size = mp->cache_size; - uint32_t flushthresh = mp->cache_flushthresh; -#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */ /* increment stat now, adding in mempool always success */ __MEMPOOL_STAT_ADD(mp, put, n); -#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0 - /* cache is not enabled or single producer */ - if (unlikely(cache_size == 0 || is_mp == 0)) + /* No cache provided or single producer */ + if (unlikely(cache == NULL || flags & MEMPOOL_F_SP_PUT)) goto ring_enqueue; /* Go straight to ring if put would overflow mem allocated for cache */ if (unlikely(n > RTE_MEMPOOL_CACHE_MAX_SIZE)) goto ring_enqueue; - cache = &mp->local_cache[lcore_id]; cache_objs = &cache->objs[cache->len]; /* @@ -487,42 +1052,55 @@ __mempool_put_bulk(struct rte_mempool *mp, void * const *obj_table, */ /* Add elements back into the cache */ - for (index = 0; index < n; ++index, obj_table++) - cache_objs[index] = *obj_table; + rte_memcpy(&cache_objs[0], obj_table, sizeof(void *) * n); cache->len += n; - if (cache->len >= flushthresh) { - rte_ring_mp_enqueue_bulk(mp->ring, &cache->objs[cache_size], - cache->len - cache_size); - cache->len = cache_size; + if (cache->len >= cache->flushthresh) { + rte_mempool_ops_enqueue_bulk(mp, &cache->objs[cache->size], + cache->len - cache->size); + cache->len = cache->size; } return; ring_enqueue: -#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */ /* push remaining objects in ring */ #ifdef RTE_LIBRTE_MEMPOOL_DEBUG - if (is_mp) { - if (rte_ring_mp_enqueue_bulk(mp->ring, obj_table, n) < 0) - rte_panic("cannot put objects in mempool\n"); - } - else { - if (rte_ring_sp_enqueue_bulk(mp->ring, obj_table, n) < 0) - rte_panic("cannot put objects in mempool\n"); - } + if (rte_mempool_ops_enqueue_bulk(mp, obj_table, n) < 0) + rte_panic("cannot put objects in mempool\n"); #else - if (is_mp) - rte_ring_mp_enqueue_bulk(mp->ring, obj_table, n); - else - rte_ring_sp_enqueue_bulk(mp->ring, obj_table, n); + rte_mempool_ops_enqueue_bulk(mp, obj_table, n); #endif } /** + * Put several objects back in the mempool. + * + * @param mp + * A pointer to the mempool structure. + * @param obj_table + * A pointer to a table of void * pointers (objects). + * @param n + * The number of objects to add in the mempool from the obj_table. + * @param cache + * A pointer to a mempool cache structure. May be NULL if not needed. + * @param flags + * The flags used for the mempool creation. + * Single-producer (MEMPOOL_F_SP_PUT flag) or multi-producers. + */ +static inline void __attribute__((always_inline)) +rte_mempool_generic_put(struct rte_mempool *mp, void * const *obj_table, + unsigned n, struct rte_mempool_cache *cache, int flags) +{ + __mempool_check_cookies(mp, obj_table, n, 0); + __mempool_generic_put(mp, obj_table, n, cache, flags); +} + +/** + * @deprecated * Put several objects back in the mempool (multi-producers safe). * * @param mp @@ -532,15 +1110,18 @@ ring_enqueue: * @param n * The number of objects to add in the mempool from the obj_table. */ -static inline void +__rte_deprecated +static inline void __attribute__((always_inline)) rte_mempool_mp_put_bulk(struct rte_mempool *mp, void * const *obj_table, unsigned n) { - __mempool_check_cookies(mp, obj_table, n, 0); - __mempool_put_bulk(mp, obj_table, n, 1); + struct rte_mempool_cache *cache; + cache = rte_mempool_default_cache(mp, rte_lcore_id()); + rte_mempool_generic_put(mp, obj_table, n, cache, 0); } /** + * @deprecated * Put several objects back in the mempool (NOT multi-producers safe). * * @param mp @@ -550,12 +1131,12 @@ rte_mempool_mp_put_bulk(struct rte_mempool *mp, void * const *obj_table, * @param n * The number of objects to add in the mempool from obj_table. */ -static inline void +__rte_deprecated +static inline void __attribute__((always_inline)) rte_mempool_sp_put_bulk(struct rte_mempool *mp, void * const *obj_table, unsigned n) { - __mempool_check_cookies(mp, obj_table, n, 0); - __mempool_put_bulk(mp, obj_table, n, 0); + rte_mempool_generic_put(mp, obj_table, n, NULL, MEMPOOL_F_SP_PUT); } /** @@ -572,15 +1153,17 @@ rte_mempool_sp_put_bulk(struct rte_mempool *mp, void * const *obj_table, * @param n * The number of objects to add in the mempool from obj_table. */ -static inline void +static inline void __attribute__((always_inline)) rte_mempool_put_bulk(struct rte_mempool *mp, void * const *obj_table, unsigned n) { - __mempool_check_cookies(mp, obj_table, n, 0); - __mempool_put_bulk(mp, obj_table, n, !(mp->flags & MEMPOOL_F_SP_PUT)); + struct rte_mempool_cache *cache; + cache = rte_mempool_default_cache(mp, rte_lcore_id()); + rte_mempool_generic_put(mp, obj_table, n, cache, mp->flags); } /** + * @deprecated * Put one object in the mempool (multi-producers safe). * * @param mp @@ -588,13 +1171,17 @@ rte_mempool_put_bulk(struct rte_mempool *mp, void * const *obj_table, * @param obj * A pointer to the object to be added. */ -static inline void +__rte_deprecated +static inline void __attribute__((always_inline)) rte_mempool_mp_put(struct rte_mempool *mp, void *obj) { - rte_mempool_mp_put_bulk(mp, &obj, 1); + struct rte_mempool_cache *cache; + cache = rte_mempool_default_cache(mp, rte_lcore_id()); + rte_mempool_generic_put(mp, &obj, 1, cache, 0); } /** + * @deprecated * Put one object back in the mempool (NOT multi-producers safe). * * @param mp @@ -602,10 +1189,11 @@ rte_mempool_mp_put(struct rte_mempool *mp, void *obj) * @param obj * A pointer to the object to be added. */ -static inline void +__rte_deprecated +static inline void __attribute__((always_inline)) rte_mempool_sp_put(struct rte_mempool *mp, void *obj) { - rte_mempool_sp_put_bulk(mp, &obj, 1); + rte_mempool_generic_put(mp, &obj, 1, NULL, MEMPOOL_F_SP_PUT); } /** @@ -620,7 +1208,7 @@ rte_mempool_sp_put(struct rte_mempool *mp, void *obj) * @param obj * A pointer to the object to be added. */ -static inline void +static inline void __attribute__((always_inline)) rte_mempool_put(struct rte_mempool *mp, void *obj) { rte_mempool_put_bulk(mp, &obj, 1); @@ -634,31 +1222,26 @@ rte_mempool_put(struct rte_mempool *mp, void *obj) * A pointer to a table of void * pointers (objects). * @param n * The number of objects to get, must be strictly positive. - * @param is_mc - * Mono-consumer (0) or multi-consumers (1). + * @param cache + * A pointer to a mempool cache structure. May be NULL if not needed. + * @param flags + * The flags used for the mempool creation. + * Single-consumer (MEMPOOL_F_SC_GET flag) or multi-consumers. * @return * - >=0: Success; number of objects supplied. * - <0: Error; code of ring dequeue function. */ -static inline int -__mempool_get_bulk(struct rte_mempool *mp, void **obj_table, - unsigned n, int is_mc) +static inline int __attribute__((always_inline)) +__mempool_generic_get(struct rte_mempool *mp, void **obj_table, + unsigned n, struct rte_mempool_cache *cache, int flags) { int ret; -#ifdef RTE_LIBRTE_MEMPOOL_DEBUG - unsigned n_orig = n; -#endif -#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0 - struct rte_mempool_cache *cache; uint32_t index, len; void **cache_objs; - unsigned lcore_id = rte_lcore_id(); - uint32_t cache_size = mp->cache_size; - cache = &mp->local_cache[lcore_id]; - - /* cache is not enabled or single consumer */ - if (unlikely(cache_size == 0 || is_mc == 0 || n >= cache_size)) + /* No cache provided or single consumer */ + if (unlikely(cache == NULL || flags & MEMPOOL_F_SC_GET || + n >= cache->size)) goto ring_dequeue; cache_objs = cache->objs; @@ -666,10 +1249,11 @@ __mempool_get_bulk(struct rte_mempool *mp, void **obj_table, /* Can this be satisfied from the cache? */ if (cache->len < n) { /* No. Backfill the cache first, and then fill from it */ - uint32_t req = n + (cache_size - cache->len); + uint32_t req = n + (cache->size - cache->len); /* How many do we require i.e. number to fill the cache + the request */ - ret = rte_ring_mc_dequeue_bulk(mp->ring, &cache->objs[cache->len], req); + ret = rte_mempool_ops_dequeue_bulk(mp, + &cache->objs[cache->len], req); if (unlikely(ret < 0)) { /* * In the offchance that we are buffer constrained, @@ -689,29 +1273,25 @@ __mempool_get_bulk(struct rte_mempool *mp, void **obj_table, cache->len -= n; - __MEMPOOL_STAT_ADD(mp, get_success, n_orig); + __MEMPOOL_STAT_ADD(mp, get_success, n); return 0; ring_dequeue: -#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */ /* get remaining objects from ring */ - if (is_mc) - ret = rte_ring_mc_dequeue_bulk(mp->ring, obj_table, n); - else - ret = rte_ring_sc_dequeue_bulk(mp->ring, obj_table, n); + ret = rte_mempool_ops_dequeue_bulk(mp, obj_table, n); if (ret < 0) - __MEMPOOL_STAT_ADD(mp, get_fail, n_orig); + __MEMPOOL_STAT_ADD(mp, get_fail, n); else - __MEMPOOL_STAT_ADD(mp, get_success, n_orig); + __MEMPOOL_STAT_ADD(mp, get_success, n); return ret; } /** - * Get several objects from the mempool (multi-consumers safe). + * Get several objects from the mempool. * * If cache is enabled, objects will be retrieved first from cache, * subsequently from the common pool. Note that it can return -ENOENT when @@ -724,21 +1304,56 @@ ring_dequeue: * A pointer to a table of void * pointers (objects) that will be filled. * @param n * The number of objects to get from mempool to obj_table. + * @param cache + * A pointer to a mempool cache structure. May be NULL if not needed. + * @param flags + * The flags used for the mempool creation. + * Single-consumer (MEMPOOL_F_SC_GET flag) or multi-consumers. * @return * - 0: Success; objects taken. * - -ENOENT: Not enough entries in the mempool; no object is retrieved. */ -static inline int -rte_mempool_mc_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned n) +static inline int __attribute__((always_inline)) +rte_mempool_generic_get(struct rte_mempool *mp, void **obj_table, unsigned n, + struct rte_mempool_cache *cache, int flags) { int ret; - ret = __mempool_get_bulk(mp, obj_table, n, 1); + ret = __mempool_generic_get(mp, obj_table, n, cache, flags); if (ret == 0) __mempool_check_cookies(mp, obj_table, n, 1); return ret; } /** + * @deprecated + * Get several objects from the mempool (multi-consumers safe). + * + * If cache is enabled, objects will be retrieved first from cache, + * subsequently from the common pool. Note that it can return -ENOENT when + * the local cache and common pool are empty, even if cache from other + * lcores are full. + * + * @param mp + * A pointer to the mempool structure. + * @param obj_table + * A pointer to a table of void * pointers (objects) that will be filled. + * @param n + * The number of objects to get from mempool to obj_table. + * @return + * - 0: Success; objects taken. + * - -ENOENT: Not enough entries in the mempool; no object is retrieved. + */ +__rte_deprecated +static inline int __attribute__((always_inline)) +rte_mempool_mc_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned n) +{ + struct rte_mempool_cache *cache; + cache = rte_mempool_default_cache(mp, rte_lcore_id()); + return rte_mempool_generic_get(mp, obj_table, n, cache, 0); +} + +/** + * @deprecated * Get several objects from the mempool (NOT multi-consumers safe). * * If cache is enabled, objects will be retrieved first from cache, @@ -757,14 +1372,12 @@ rte_mempool_mc_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned n) * - -ENOENT: Not enough entries in the mempool; no object is * retrieved. */ -static inline int +__rte_deprecated +static inline int __attribute__((always_inline)) rte_mempool_sc_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned n) { - int ret; - ret = __mempool_get_bulk(mp, obj_table, n, 0); - if (ret == 0) - __mempool_check_cookies(mp, obj_table, n, 1); - return ret; + return rte_mempool_generic_get(mp, obj_table, n, NULL, + MEMPOOL_F_SC_GET); } /** @@ -789,18 +1402,16 @@ rte_mempool_sc_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned n) * - 0: Success; objects taken * - -ENOENT: Not enough entries in the mempool; no object is retrieved. */ -static inline int +static inline int __attribute__((always_inline)) rte_mempool_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned n) { - int ret; - ret = __mempool_get_bulk(mp, obj_table, n, - !(mp->flags & MEMPOOL_F_SC_GET)); - if (ret == 0) - __mempool_check_cookies(mp, obj_table, n, 1); - return ret; + struct rte_mempool_cache *cache; + cache = rte_mempool_default_cache(mp, rte_lcore_id()); + return rte_mempool_generic_get(mp, obj_table, n, cache, mp->flags); } /** + * @deprecated * Get one object from the mempool (multi-consumers safe). * * If cache is enabled, objects will be retrieved first from cache, @@ -816,13 +1427,17 @@ rte_mempool_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned n) * - 0: Success; objects taken. * - -ENOENT: Not enough entries in the mempool; no object is retrieved. */ -static inline int +__rte_deprecated +static inline int __attribute__((always_inline)) rte_mempool_mc_get(struct rte_mempool *mp, void **obj_p) { - return rte_mempool_mc_get_bulk(mp, obj_p, 1); + struct rte_mempool_cache *cache; + cache = rte_mempool_default_cache(mp, rte_lcore_id()); + return rte_mempool_generic_get(mp, obj_p, 1, cache, 0); } /** + * @deprecated * Get one object from the mempool (NOT multi-consumers safe). * * If cache is enabled, objects will be retrieved first from cache, @@ -838,10 +1453,11 @@ rte_mempool_mc_get(struct rte_mempool *mp, void **obj_p) * - 0: Success; objects taken. * - -ENOENT: Not enough entries in the mempool; no object is retrieved. */ -static inline int +__rte_deprecated +static inline int __attribute__((always_inline)) rte_mempool_sc_get(struct rte_mempool *mp, void **obj_p) { - return rte_mempool_sc_get_bulk(mp, obj_p, 1); + return rte_mempool_generic_get(mp, obj_p, 1, NULL, MEMPOOL_F_SC_GET); } /** @@ -864,13 +1480,28 @@ rte_mempool_sc_get(struct rte_mempool *mp, void **obj_p) * - 0: Success; objects taken. * - -ENOENT: Not enough entries in the mempool; no object is retrieved. */ -static inline int +static inline int __attribute__((always_inline)) rte_mempool_get(struct rte_mempool *mp, void **obj_p) { return rte_mempool_get_bulk(mp, obj_p, 1); } /** + * Return the number of entries in the mempool. + * + * When cache is enabled, this function has to browse the length of + * all lcores, so it should not be used in a data path, but only for + * debug purposes. User-owned mempool caches are not accounted for. + * + * @param mp + * A pointer to the mempool structure. + * @return + * The number of entries in the mempool. + */ +unsigned int rte_mempool_avail_count(const struct rte_mempool *mp); + +/** + * @deprecated * Return the number of entries in the mempool. * * When cache is enabled, this function has to browse the length of @@ -882,10 +1513,11 @@ rte_mempool_get(struct rte_mempool *mp, void **obj_p) * @return * The number of entries in the mempool. */ +__rte_deprecated unsigned rte_mempool_count(const struct rte_mempool *mp); /** - * Return the number of free entries in the mempool. + * Return the number of elements which have been allocated from the mempool * * When cache is enabled, this function has to browse the length of * all lcores, so it should not be used in a data path, but only for @@ -896,10 +1528,32 @@ unsigned rte_mempool_count(const struct rte_mempool *mp); * @return * The number of free entries in the mempool. */ +unsigned int +rte_mempool_in_use_count(const struct rte_mempool *mp); + +/** + * @deprecated + * Return the number of free entries in the mempool ring. + * i.e. how many entries can be freed back to the mempool. + * + * NOTE: This corresponds to the number of elements *allocated* from the + * memory pool, not the number of elements in the pool itself. To count + * the number elements currently available in the pool, use "rte_mempool_count" + * + * When cache is enabled, this function has to browse the length of + * all lcores, so it should not be used in a data path, but only for + * debug purposes. User-owned mempool caches are not accounted for. + * + * @param mp + * A pointer to the mempool structure. + * @return + * The number of free entries in the mempool. + */ +__rte_deprecated static inline unsigned rte_mempool_free_count(const struct rte_mempool *mp) { - return mp->size - rte_mempool_count(mp); + return rte_mempool_in_use_count(mp); } /** @@ -907,7 +1561,7 @@ rte_mempool_free_count(const struct rte_mempool *mp) * * When cache is enabled, this function has to browse the length of all * lcores, so it should not be used in a data path, but only for debug - * purposes. + * purposes. User-owned mempool caches are not accounted for. * * @param mp * A pointer to the mempool structure. @@ -918,7 +1572,7 @@ rte_mempool_free_count(const struct rte_mempool *mp) static inline int rte_mempool_full(const struct rte_mempool *mp) { - return !!(rte_mempool_count(mp) == mp->size); + return !!(rte_mempool_avail_count(mp) == mp->size); } /** @@ -926,7 +1580,7 @@ rte_mempool_full(const struct rte_mempool *mp) * * When cache is enabled, this function has to browse the length of all * lcores, so it should not be used in a data path, but only for debug - * purposes. + * purposes. User-owned mempool caches are not accounted for. * * @param mp * A pointer to the mempool structure. @@ -937,7 +1591,7 @@ rte_mempool_full(const struct rte_mempool *mp) static inline int rte_mempool_empty(const struct rte_mempool *mp) { - return !!(rte_mempool_count(mp) == 0); + return !!(rte_mempool_avail_count(mp) == 0); } /** @@ -949,17 +1603,18 @@ rte_mempool_empty(const struct rte_mempool *mp) * A pointer (virtual address) to the element of the pool. * @return * The physical address of the elt element. + * If the mempool was created with MEMPOOL_F_NO_PHYS_CONTIG, the + * returned value is RTE_BAD_PHYS_ADDR. */ -static inline phys_addr_t rte_mempool_virt2phy(const struct rte_mempool *mp, - const void *elt) +static inline phys_addr_t +rte_mempool_virt2phy(__rte_unused const struct rte_mempool *mp, const void *elt) { - uintptr_t off; - - off = (const char *)elt - (const char *)mp; - return mp->phys_addr + off; + const struct rte_mempool_objhdr *hdr; + hdr = (const struct rte_mempool_objhdr *)RTE_PTR_SUB(elt, + sizeof(*hdr)); + return hdr->physaddr; } - /** * Check the consistency of mempool objects. * @@ -970,7 +1625,7 @@ static inline phys_addr_t rte_mempool_virt2phy(const struct rte_mempool *mp, * @param mp * A pointer to the mempool structure. */ -void rte_mempool_audit(const struct rte_mempool *mp); +void rte_mempool_audit(struct rte_mempool *mp); /** * Return a pointer to the private data in an mempool structure. @@ -982,13 +1637,17 @@ void rte_mempool_audit(const struct rte_mempool *mp); */ static inline void *rte_mempool_get_priv(struct rte_mempool *mp) { - return (char *)mp + sizeof(struct rte_mempool); + return (char *)mp + + MEMPOOL_HEADER_SIZE(mp, mp->cache_size); } /** * Dump the status of all mempools on the console + * + * @param f + * A pointer to a file for output */ -void rte_mempool_list_dump(void); +void rte_mempool_list_dump(FILE *f); /** * Search a mempool from its name @@ -996,13 +1655,100 @@ void rte_mempool_list_dump(void); * @param name * The name of the mempool. * @return - * The pointer to the mempool matching the name, or NULL if not found.NULL on error + * The pointer to the mempool matching the name, or NULL if not found. + * NULL on error * with rte_errno set appropriately. Possible rte_errno values include: * - ENOENT - required entry not available to return. * */ struct rte_mempool *rte_mempool_lookup(const char *name); +/** + * Get the header, trailer and total size of a mempool element. + * + * Given a desired size of the mempool element and mempool flags, + * calculates header, trailer, body and total sizes of the mempool object. + * + * @param elt_size + * The size of each element, without header and trailer. + * @param flags + * The flags used for the mempool creation. + * Consult rte_mempool_create() for more information about possible values. + * The size of each element. + * @param sz + * The calculated detailed size the mempool object. May be NULL. + * @return + * Total size of the mempool object. + */ +uint32_t rte_mempool_calc_obj_size(uint32_t elt_size, uint32_t flags, + struct rte_mempool_objsz *sz); + +/** + * Get the size of memory required to store mempool elements. + * + * Calculate the maximum amount of memory required to store given number + * of objects. Assume that the memory buffer will be aligned at page + * boundary. + * + * Note that if object size is bigger then page size, then it assumes + * that pages are grouped in subsets of physically continuous pages big + * enough to store at least one object. + * + * @param elt_num + * Number of elements. + * @param total_elt_sz + * The size of each element, including header and trailer, as returned + * by rte_mempool_calc_obj_size(). + * @param pg_shift + * LOG2 of the physical pages size. If set to 0, ignore page boundaries. + * @return + * Required memory size aligned at page boundary. + */ +size_t rte_mempool_xmem_size(uint32_t elt_num, size_t total_elt_sz, + uint32_t pg_shift); + +/** + * Get the size of memory required to store mempool elements. + * + * Calculate how much memory would be actually required with the given + * memory footprint to store required number of objects. + * + * @param vaddr + * Virtual address of the externally allocated memory buffer. + * Will be used to store mempool objects. + * @param elt_num + * Number of elements. + * @param total_elt_sz + * The size of each element, including header and trailer, as returned + * by rte_mempool_calc_obj_size(). + * @param paddr + * Array of physical addresses of the pages that comprises given memory + * buffer. + * @param pg_num + * Number of elements in the paddr array. + * @param pg_shift + * LOG2 of the physical pages size. + * @return + * On success, the number of bytes needed to store given number of + * objects, aligned to the given page size. If the provided memory + * buffer is too small, return a negative value whose absolute value + * is the actual number of elements that can be stored in that buffer. + */ +ssize_t rte_mempool_xmem_usage(void *vaddr, uint32_t elt_num, + size_t total_elt_sz, const phys_addr_t paddr[], uint32_t pg_num, + uint32_t pg_shift); + +/** + * Walk list of all memory pools + * + * @param func + * Iterator function + * @param arg + * Argument passed to iterator + */ +void rte_mempool_walk(void (*func)(struct rte_mempool *, void *arg), + void *arg); + #ifdef __cplusplus } #endif