X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=mk%2Frte.sdkinstall.mk;h=32bed5d9510f8e92f72960bf67eb21857e16857a;hb=a617494eeb01ff;hp=975d9b9ca37503a028f22804bae83377197ac6ea;hpb=dada9ef6edc59015b6674b5a95258787c71401b0;p=dpdk.git

diff --git a/mk/rte.sdkinstall.mk b/mk/rte.sdkinstall.mk
index 975d9b9ca3..32bed5d951 100644
--- a/mk/rte.sdkinstall.mk
+++ b/mk/rte.sdkinstall.mk
@@ -1,75 +1,152 @@
-#   BSD LICENSE
-# 
-#   Copyright(c) 2010-2012 Intel Corporation. All rights reserved.
-#   All rights reserved.
-# 
-#   Redistribution and use in source and binary forms, with or without 
-#   modification, are permitted provided that the following conditions 
-#   are met:
-# 
-#     * Redistributions of source code must retain the above copyright 
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright 
-#       notice, this list of conditions and the following disclaimer in 
-#       the documentation and/or other materials provided with the 
-#       distribution.
-#     * Neither the name of Intel Corporation nor the names of its 
-#       contributors may be used to endorse or promote products derived 
-#       from this software without specific prior written permission.
-# 
-#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
-#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
-#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
-#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
-#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
-#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
-#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
-#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
-#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
-#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2014 Intel Corporation.
+# Copyright 2015 6WIND S.A.
 
-ifdef O
-ifeq ("$(origin O)", "command line")
-$(error "Cannot use O= with install target")
+# Configuration, compilation and installation can be done at once
+# with make install T=<config>
+
+ifdef T # config, build and install combined
+# The build directory is T and may be prepended with O
+O ?= .
+RTE_OUTPUT := $O/$T
+else # standard install
+# Build directory is given with O=
+O ?= build
+RTE_OUTPUT := $O
 endif
+
+ifneq ($(MAKECMDGOALS),pre_install)
+include $(RTE_SDK)/mk/rte.vars.mk
 endif
 
-# Targets to install can be specified in command line. It can be a
-# target name or a name containing jokers "*". Example:
-# x86_64-default-*-gcc
-ifndef T
-T=*
+ifdef T # defaults with T= will install an almost flat staging tree
+export prefix ?=
+kerneldir   ?= $(prefix)/kmod
+else
+ifeq ($(RTE_EXEC_ENV),linuxapp)
+RTE_EXEC_ENV=linux
+endif
+ifeq ($(RTE_EXEC_ENV),linux)
+kerneldir   ?= $(RTE_KERNELDIR:/build=/extra/dpdk)
+else
+kerneldir   ?= /boot/modules
+endif
+prefix      ?=     /usr/local
 endif
+exec_prefix ?=      $(prefix)
+bindir      ?= $(exec_prefix)/bin
+sbindir     ?= $(exec_prefix)/sbin
+libdir      ?= $(exec_prefix)/lib
+includedir  ?=      $(prefix)/include/dpdk
+datarootdir ?=      $(prefix)/share
+docdir      ?=       $(datarootdir)/doc/dpdk
+datadir     ?=       $(datarootdir)/dpdk
+mandir      ?=       $(datarootdir)/man
+sdkdir      ?=                $(datadir)
+targetdir   ?=                $(datadir)/$(RTE_TARGET)
 
-#
-# install: build sdk for all supported targets
-#
-INSTALL_CONFIGS := $(patsubst $(RTE_SRCDIR)/config/defconfig_%,%,\
-	$(wildcard $(RTE_SRCDIR)/config/defconfig_$(T)))
-INSTALL_TARGETS := $(addsuffix _install,\
-	$(filter-out %~,$(INSTALL_CONFIGS)))
+# The install directories may be staged in DESTDIR
 
-.PHONY: install
-install: $(INSTALL_TARGETS)
+# Create the directory $1 if not exists
+rte_mkdir = test -d $1 || mkdir -p $1
 
-%_install:
-	@echo ================== Installing $*
-	$(Q)$(MAKE) config T=$* O=$*
-	$(Q)$(MAKE) all O=$*
+# Create the relative symbolic link $2 -> $1
+# May be replaced with --relative option of ln from coreutils-8.16
+rte_symlink = ln -snf $$($(RTE_SDK)/buildtools/relpath.sh $1 $(dir $2)) $2
 
-#
-# uninstall: remove all built sdk
-#
-UNINSTALL_TARGETS := $(addsuffix _uninstall,\
-	$(filter-out %~,$(INSTALL_CONFIGS)))
+.PHONY: pre_install
+pre_install:
+ifdef T
+	$(Q)if [ ! -f $(RTE_OUTPUT)/.config ]; then \
+		$(MAKE) config O=$(RTE_OUTPUT); \
+	elif cmp -s $(RTE_OUTPUT)/.config.orig $(RTE_OUTPUT)/.config; then \
+		$(MAKE) config O=$(RTE_OUTPUT); \
+	else \
+		if [ -f $(RTE_OUTPUT)/.config.orig ] ; then \
+			tmp_build=$(RTE_OUTPUT)/.config.tmp; \
+			$(MAKE) config O=$$tmp_build; \
+			if ! cmp -s $(RTE_OUTPUT)/.config.orig $$tmp_build/.config ; then \
+				echo "Conflict: local config and template config have both changed"; \
+				exit 1; \
+			fi; \
+		fi; \
+		echo "Using local configuration"; \
+	fi
+	$(Q)$(MAKE) all O=$(RTE_OUTPUT)
+endif
 
-.PHONY: uninstall
-uninstall: $(UNINSTALL_TARGETS)
+.PHONY: install
+install:
+ifeq ($(DESTDIR)$(if $T,,+),)
+	@echo Installation cannot run with T defined and DESTDIR undefined
+else
+	@echo ================== Installing $(DESTDIR)$(prefix)/
+	$(Q)$(MAKE) O=$(RTE_OUTPUT) T= install-runtime
+	$(Q)$(MAKE) O=$(RTE_OUTPUT) T= install-kmod
+	$(Q)$(MAKE) O=$(RTE_OUTPUT) T= install-sdk
+	$(Q)$(MAKE) O=$(RTE_OUTPUT) T= install-doc
+	@echo Installation in $(DESTDIR)$(prefix)/ complete
+endif
 
-%_uninstall:
-	@echo ================== Uninstalling $*
-	$(Q)rm -rf $*
+# when installing we want recursive copies preserving timestamps only, no
+# preservation of user/group ids or permissions
+CP_FLAGS=-dR --preserve=timestamps
+TAR_X_FLAGS=--strip-components=1 --keep-newer-files --no-same-owner --no-same-permissions
 
+install-runtime:
+	$(Q)$(call rte_mkdir, $(DESTDIR)$(libdir))
+	$(Q)cp $(CP_FLAGS)    $O/lib/* $(DESTDIR)$(libdir)
+	$(Q)$(call rte_mkdir, $(DESTDIR)$(bindir))
+	$(Q)tar -cf -      -C $O --exclude 'app/*.map' \
+		--exclude app/dpdk-pmdinfogen \
+		--exclude 'app/cmdline*' --exclude app/test \
+		--exclude app/testacl --exclude app/testpipeline app | \
+	    tar -xf -      -C $(DESTDIR)$(bindir) $(TAR_X_FLAGS)
+	$(Q)$(call rte_mkdir,      $(DESTDIR)$(datadir)/usertools)
+	$(Q)tar -cf -      -C $(RTE_SDK) --exclude meson.build usertools | \
+	    tar -xf -      -C $(DESTDIR)$(datadir)/usertools $(TAR_X_FLAGS)
+	$(Q)$(call rte_mkdir,      $(DESTDIR)$(sbindir))
+	$(Q)$(call rte_symlink,    $(DESTDIR)$(datadir)/usertools/dpdk-devbind.py, \
+	                           $(DESTDIR)$(sbindir)/dpdk-devbind)
+	$(Q)$(call rte_symlink,    $(DESTDIR)$(datadir)/usertools/dpdk-pmdinfo.py, \
+	                           $(DESTDIR)$(bindir)/dpdk-pmdinfo)
+ifneq ($(wildcard $O/doc/man/*/*.1),)
+	$(Q)$(call rte_mkdir,      $(DESTDIR)$(mandir)/man1)
+	$(Q)cp $(CP_FLAGS) $O/doc/man/*/*.1 $(DESTDIR)$(mandir)/man1
+endif
+ifneq ($(wildcard $O/doc/man/*/*.8),)
+	$(Q)$(call rte_mkdir,      $(DESTDIR)$(mandir)/man8)
+	$(Q)cp $(CP_FLAGS) $O/doc/man/*/*.8 $(DESTDIR)$(mandir)/man8
+endif
+
+install-kmod:
+ifneq ($(wildcard $O/kmod/*),)
+	$(Q)$(call rte_mkdir, $(DESTDIR)$(kerneldir))
+	$(Q)cp $(CP_FLAGS)   $O/kmod/* $(DESTDIR)$(kerneldir)
+endif
 
+install-sdk:
+	$(Q)$(call rte_mkdir, $(DESTDIR)$(includedir))
+	$(Q)tar -chf -     -C $O include | \
+	    tar -xf -      -C $(DESTDIR)$(includedir) $(TAR_X_FLAGS)
+	$(Q)$(call rte_mkdir,                            $(DESTDIR)$(sdkdir))
+	$(Q)cp $(CP_FLAGS)      $(RTE_SDK)/mk            $(DESTDIR)$(sdkdir)
+	$(Q)cp $(CP_FLAGS)      $(RTE_SDK)/buildtools    $(DESTDIR)$(sdkdir)
+	$(Q)$(call rte_mkdir,                            $(DESTDIR)$(targetdir)/app)
+	$(Q)cp $(CP_FLAGS)      $O/.config               $(DESTDIR)$(targetdir)
+	$(Q)cp $(CP_FLAGS)      $O/app/dpdk-pmdinfogen   $(DESTDIR)$(targetdir)/app
+	$(Q)$(call rte_symlink, $(DESTDIR)$(includedir), $(DESTDIR)$(targetdir)/include)
+	$(Q)$(call rte_symlink, $(DESTDIR)$(libdir),     $(DESTDIR)$(targetdir)/lib)
+
+install-doc:
+ifneq ($(wildcard $O/doc/html),)
+	$(Q)$(call rte_mkdir, $(DESTDIR)$(docdir))
+	$(Q)tar -cf -      -C $O/doc --exclude 'html/guides/.*' html | \
+	    tar -xf -      -C $(DESTDIR)$(docdir) $(TAR_X_FLAGS)
+endif
+ifneq ($(wildcard $O/doc/*/*/*pdf),)
+	$(Q)$(call rte_mkdir,     $(DESTDIR)$(docdir)/guides)
+	$(Q)cp $(CP_FLAGS) $O/doc/*/*/*pdf $(DESTDIR)$(docdir)/guides
+endif
+	$(Q)$(call rte_mkdir,         $(DESTDIR)$(datadir))
+	$(Q)cp $(CP_FLAGS) $(RTE_SDK)/examples $(DESTDIR)$(datadir)