X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=projects%2Fmicrob2010%2Ftests%2Fbeacon_tsop%2Fuart_config.h;h=b6d70b38d265f4dd7a569154df615975abe125ab;hb=78150017ab8c5615af414df706a0525fe7c262ae;hp=13e1af7323a1db76100756322f15327f62a077be;hpb=dccae820e0f5c68a3a9c496b63eb8d02102d6ebc;p=aversive.git

diff --git a/projects/microb2010/tests/beacon_tsop/uart_config.h b/projects/microb2010/tests/beacon_tsop/uart_config.h
index 13e1af7..b6d70b3 100644
--- a/projects/microb2010/tests/beacon_tsop/uart_config.h
+++ b/projects/microb2010/tests/beacon_tsop/uart_config.h
@@ -64,6 +64,44 @@
 //#define UART0_STOP_BIT UART_STOP_BITS_2
 
 
+/*
+ * UART1 definitions 
+ */
+
+/* compile uart1 fonctions, undefine it to pass compilation */
+#define UART1_COMPILE  
+
+/* enable uart1 if == 1, disable if == 0 */
+#define UART1_ENABLED  1
+
+/* enable uart1 interrupts if == 1, disable if == 0 */
+#define UART1_INTERRUPT_ENABLED  0
+
+#define UART1_BAUDRATE 57600
+
+/* 
+ * if you enable this, the maximum baudrate you can reach is 
+ * higher, but the precision is lower. 
+ */
+#define UART1_USE_DOUBLE_SPEED 1
+//#define UART1_USE_DOUBLE_SPEED 1
+
+#define UART1_RX_FIFO_SIZE 4
+#define UART1_TX_FIFO_SIZE 1
+//#define UART1_NBITS 5
+//#define UART1_NBITS 6
+//#define UART1_NBITS 7
+#define UART1_NBITS 8
+//#define UART1_NBITS 9
+
+#define UART1_PARITY UART_PARTITY_NONE
+//#define UART1_PARITY UART_PARTITY_ODD
+//#define UART1_PARITY UART_PARTITY_EVEN
+
+#define UART1_STOP_BIT UART_STOP_BITS_1
+//#define UART1_STOP_BIT UART_STOP_BITS_2
+
+
 
 
 /* .... same for uart 1, 2, 3 ... */