From: Gaetan Rivet Date: Mon, 27 Mar 2017 15:41:37 +0000 (+0200) Subject: net/mlx4: add port parameter X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=001a520e419fdbab8d83f572c2a4414c7bc8ed07;p=dpdk.git net/mlx4: add port parameter Most ConnectX-3 adapters expose two physical ports on a single PCI bus address. Add a new port parameter allowing the user to choose either or both physical ports to be used by the application. This parameter is used as follows: Selecting only the second port: -w 00:00.0,port=1 Selecting both ports: -w 00:00.0,port=0,port=1 If no parameter is given, the default behavior is unchanged: all ports are probed. Signed-off-by: Gaetan Rivet Acked-by: Adrien Mazarguil --- diff --git a/doc/guides/nics/mlx4.rst b/doc/guides/nics/mlx4.rst index 3762c606d5..3ab1def9a2 100644 --- a/doc/guides/nics/mlx4.rst +++ b/doc/guides/nics/mlx4.rst @@ -162,6 +162,12 @@ Run-time configuration - **ethtool** operations on related kernel interfaces also affect the PMD. +- ``port`` parameter [int] + + This parameter provides a physical port to probe and can be specified multiple + times for additional ports. All ports are probed by default if left + unspecified. + Kernel module parameters ~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/drivers/net/mlx4/Makefile b/drivers/net/mlx4/Makefile index e873fb4805..f0ee28251c 100644 --- a/drivers/net/mlx4/Makefile +++ b/drivers/net/mlx4/Makefile @@ -38,6 +38,13 @@ LIB = librte_pmd_mlx4.a SRCS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4.c SRCS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4_flow.c +# Dependencies. +DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_ether +DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_mbuf +DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_eal +DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_mempool +DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_kvargs + # Basic CFLAGS. CFLAGS += -O3 CFLAGS += -std=gnu99 -Wall -Wextra diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c index 7caa5e44ef..4427ca3533 100644 --- a/drivers/net/mlx4/mlx4.c +++ b/drivers/net/mlx4/mlx4.c @@ -73,6 +73,7 @@ #include #include #include +#include /* Generated configuration header. */ #include "mlx4_autoconf.h" @@ -115,6 +116,16 @@ struct mlx4_secondary_data { rte_spinlock_t lock; /* Port configuration lock. */ } mlx4_secondary_data[RTE_MAX_ETHPORTS]; +struct mlx4_conf { + uint8_t active_ports; +}; + +/* Available parameters list. */ +const char *pmd_mlx4_init_params[] = { + MLX4_PMD_PORT_KVARG, + NULL, +}; + /** * Check if running as a secondary process. * @@ -5386,6 +5397,84 @@ priv_dev_interrupt_handler_install(struct priv *priv, struct rte_eth_dev *dev) } } +/** + * Verify and store value for device argument. + * + * @param[in] key + * Key argument to verify. + * @param[in] val + * Value associated with key. + * @param out + * User data. + * + * @return + * 0 on success, negative errno value on failure. + */ +static int +mlx4_arg_parse(const char *key, const char *val, void *out) +{ + struct mlx4_conf *conf = out; + unsigned long tmp; + + errno = 0; + tmp = strtoul(val, NULL, 0); + if (errno) { + WARN("%s: \"%s\" is not a valid integer", key, val); + return -errno; + } + if (strcmp(MLX4_PMD_PORT_KVARG, key) == 0) { + if (tmp >= MLX4_PMD_MAX_PHYS_PORTS) { + ERROR("invalid port index %lu (max: %u)", + tmp, MLX4_PMD_MAX_PHYS_PORTS - 1); + return -EINVAL; + } + conf->active_ports |= 1 << tmp; + } else { + WARN("%s: unknown parameter", key); + return -EINVAL; + } + return 0; +} + +/** + * Parse device parameters. + * + * @param devargs + * Device arguments structure. + * + * @return + * 0 on success, negative errno value on failure. + */ +static int +mlx4_args(struct rte_devargs *devargs, struct mlx4_conf *conf) +{ + struct rte_kvargs *kvlist; + unsigned int arg_count; + int ret = 0; + int i; + + if (devargs == NULL) + return 0; + kvlist = rte_kvargs_parse(devargs->args, pmd_mlx4_init_params); + if (kvlist == NULL) { + ERROR("failed to parse kvargs"); + return -EINVAL; + } + /* Process parameters. */ + for (i = 0; pmd_mlx4_init_params[i]; ++i) { + arg_count = rte_kvargs_count(kvlist, MLX4_PMD_PORT_KVARG); + while (arg_count-- > 0) { + ret = rte_kvargs_process(kvlist, MLX4_PMD_PORT_KVARG, + mlx4_arg_parse, conf); + if (ret != 0) + goto free_kvlist; + } + } +free_kvlist: + rte_kvargs_free(kvlist); + return ret; +} + static struct eth_driver mlx4_driver; /** @@ -5410,6 +5499,9 @@ mlx4_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev) int err = 0; struct ibv_context *attr_ctx = NULL; struct ibv_device_attr device_attr; + struct mlx4_conf conf = { + .active_ports = 0, + }; unsigned int vf; int idx; int i; @@ -5480,6 +5572,15 @@ mlx4_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev) goto error; INFO("%u port(s) detected", device_attr.phys_port_cnt); + if (mlx4_args(pci_dev->device.devargs, &conf)) { + ERROR("failed to process device arguments"); + goto error; + } + /* Use all ports when none are defined */ + if (conf.active_ports == 0) { + for (i = 0; i < MLX4_PMD_MAX_PHYS_PORTS; i++) + conf.active_ports |= 1 << i; + } for (i = 0; i < device_attr.phys_port_cnt; i++) { uint32_t port = i + 1; /* ports are indexed from one */ uint32_t test = (1 << i); @@ -5493,6 +5594,9 @@ mlx4_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev) #endif /* HAVE_EXP_QUERY_DEVICE */ struct ether_addr mac; + /* If port is not active, skip. */ + if (!(conf.active_ports & (1 << i))) + continue; #ifdef HAVE_EXP_QUERY_DEVICE exp_device_attr.comp_mask = IBV_EXP_DEVICE_ATTR_EXP_CAP_FLAGS; #ifdef RSS_SUPPORT diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h index fac408b3d8..42254405fb 100644 --- a/drivers/net/mlx4/mlx4.h +++ b/drivers/net/mlx4/mlx4.h @@ -81,6 +81,9 @@ /* Request send completion once in every 64 sends, might be less. */ #define MLX4_PMD_TX_PER_COMP_REQ 64 +/* Maximum number of physical ports. */ +#define MLX4_PMD_MAX_PHYS_PORTS 2 + /* Maximum number of Scatter/Gather Elements per Work Request. */ #ifndef MLX4_PMD_SGE_WR_N #define MLX4_PMD_SGE_WR_N 4 @@ -113,6 +116,9 @@ /* Alarm timeout. */ #define MLX4_ALARM_TIMEOUT_US 100000 +/* Port parameter. */ +#define MLX4_PMD_PORT_KVARG "port" + enum { PCI_VENDOR_ID_MELLANOX = 0x15b3, };