From: Herakliusz Lipiec Date: Wed, 10 May 2017 13:38:52 +0000 (+0100) Subject: doc: update bonding device name in prog guide X-Git-Tag: spdx-start~3222 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=10c929f593d53d05d3ff25be43f7bf51aa6880a8;p=dpdk.git doc: update bonding device name in prog guide Fixes: 35b09d76f89e ("doc: use corelist instead of coremask") Fixes: 58c82067f1ae ("app/testpmd: use consistent vdev names") Signed-off-by: Herakliusz Lipiec Acked-by: John McNamara --- diff --git a/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst b/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst index 73fefcedad..1ef231df93 100644 --- a/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst +++ b/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst @@ -356,7 +356,7 @@ Using Link Bonding Devices from the EAL Command Line Link bonding devices can be created at application startup time using the ``--vdev`` EAL command line option. The device name must start with the -net_bond prefix followed by numbers or letters. The name must be unique for +net_bonding prefix followed by numbers or letters. The name must be unique for each device. Each device can have multiple options arranged in a comma separated list. Multiple devices definitions can be arranged by calling the ``--vdev`` option multiple times. @@ -365,7 +365,7 @@ Device names and bonding options must be separated by commas as shown below: .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bond0,bond_opt0=..,bond opt1=..'--vdev 'net_bond1,bond _opt0=..,bond_opt1=..' + $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bonding0,bond_opt0=..,bond opt1=..'--vdev 'net_bonding1,bond _opt0=..,bond_opt1=..' Link Bonding EAL Options ^^^^^^^^^^^^^^^^^^^^^^^^ @@ -373,7 +373,7 @@ Link Bonding EAL Options There are multiple ways of definitions that can be assessed and combined as long as the following two rules are respected: -* A unique device name, in the format of net_bondX is provided, +* A unique device name, in the format of net_bondingX is provided, where X can be any combination of numbers and/or letters, and the name is no greater than 32 characters long. @@ -465,22 +465,22 @@ Create a bonded device in round robin mode with two slaves specified by their PC .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bond0,mode=0, slave=0000:00a:00.01,slave=0000:004:00.00' -- --port-topology=chained + $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bonding0,mode=0, slave=0000:00a:00.01,slave=0000:004:00.00' -- --port-topology=chained Create a bonded device in round robin mode with two slaves specified by their PCI address and an overriding MAC address: .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bond0,mode=0, slave=0000:00a:00.01,slave=0000:004:00.00,mac=00:1e:67:1d:fd:1d' -- --port-topology=chained + $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bonding0,mode=0, slave=0000:00a:00.01,slave=0000:004:00.00,mac=00:1e:67:1d:fd:1d' -- --port-topology=chained Create a bonded device in active backup mode with two slaves specified, and a primary slave specified by their PCI addresses: .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bond0,mode=1, slave=0000:00a:00.01,slave=0000:004:00.00,primary=0000:00a:00.01' -- --port-topology=chained + $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bonding0,mode=1, slave=0000:00a:00.01,slave=0000:004:00.00,primary=0000:00a:00.01' -- --port-topology=chained Create a bonded device in balance mode with two slaves specified by their PCI addresses, and a transmission policy of layer 3 + 4 forwarding: .. code-block:: console - $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bond0,mode=2, slave=0000:00a:00.01,slave=0000:004:00.00,xmit_policy=l34' -- --port-topology=chained + $RTE_TARGET/app/testpmd -l 0-3 -n 4 --vdev 'net_bonding0,mode=2, slave=0000:00a:00.01,slave=0000:004:00.00,xmit_policy=l34' -- --port-topology=chained