From: Wenzhuo Lu Date: Fri, 5 Jun 2015 05:21:41 +0000 (+0800) Subject: ixgbe/base: issue firmware command when resetting X550em X-Git-Tag: spdx-start~9095 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=241d31f4733c3ce698a2756c90ca3cc915ae31d0;p=dpdk.git ixgbe/base: issue firmware command when resetting X550em The driver now needs to issue a firmware command to inform the firmware that a driver is coming up. This prevents the possibility of the firmware and the driver configuring the PHY at the same time. Upon completion of the command, the firmware will no longer be configuring the PHY. Signed-off-by: Wenzhuo Lu Acked-by: Helin Zhang --- diff --git a/drivers/net/ixgbe/base/ixgbe_type.h b/drivers/net/ixgbe/base/ixgbe_type.h index 0e4f31207f..4e38f5315e 100644 --- a/drivers/net/ixgbe/base/ixgbe_type.h +++ b/drivers/net/ixgbe/base/ixgbe_type.h @@ -2798,6 +2798,7 @@ enum ixgbe_fdir_pballoc_type { #define IXGBE_HI_FLASH_ERASE_TIMEOUT 1000 /* Process Erase command limit */ #define IXGBE_HI_FLASH_UPDATE_TIMEOUT 5000 /* Process Update command limit */ #define IXGBE_HI_FLASH_APPLY_TIMEOUT 0 /* Process Apply command limit */ +#define IXGBE_HI_PHY_MGMT_REQ_TIMEOUT 2000 /* Wait up to 2 seconds */ /* CEM Support */ #define FW_CEM_HDR_LEN 0x4 @@ -2818,6 +2819,7 @@ enum ixgbe_fdir_pballoc_type { #define FW_MAX_READ_BUFFER_SIZE 1024 #define FW_DISABLE_RXEN_CMD 0xDE #define FW_DISABLE_RXEN_LEN 0x1 +#define FW_PHY_MGMT_REQ_CMD 0x20 /* Host Interface Command Structures */ struct ixgbe_hic_hdr { diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c index 4664583dc2..0ce1c8536e 100644 --- a/drivers/net/ixgbe/base/ixgbe_x550.c +++ b/drivers/net/ixgbe/base/ixgbe_x550.c @@ -972,6 +972,7 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) */ s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw) { + struct ixgbe_hic_hdr fw_cmd; ixgbe_link_speed link_speed; s32 status; u32 ctrl = 0; @@ -980,6 +981,22 @@ s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw) DEBUGFUNC("ixgbe_reset_hw_X550em"); + fw_cmd.cmd = FW_PHY_MGMT_REQ_CMD; + fw_cmd.buf_len = 0; + fw_cmd.cmd_or_resp.cmd_resv = 0; + fw_cmd.checksum = FW_DEFAULT_CHECKSUM; + status = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, + sizeof(fw_cmd), + IXGBE_HI_PHY_MGMT_REQ_TIMEOUT, + true); + if (status) + ERROR_REPORT2(IXGBE_ERROR_CAUTION, + "PHY mgmt command failed with %d\n", status); + else if (fw_cmd.cmd_or_resp.ret_status != FW_CEM_RESP_STATUS_SUCCESS) + ERROR_REPORT2(IXGBE_ERROR_CAUTION, + "PHY mgmt command returned %d\n", + fw_cmd.cmd_or_resp.ret_status); + /* Call adapter stop to disable Tx/Rx and clear interrupts */ status = hw->mac.ops.stop_adapter(hw); if (status != IXGBE_SUCCESS)