From: Abhinandan Gujjar Date: Wed, 9 May 2018 09:20:34 +0000 (+0530) Subject: test: add event crypto adapter auto-test X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=3c2c535ecfc06da4a558fb86afc7e7d39b787f85;p=dpdk.git test: add event crypto adapter auto-test Added testsuite to test the crypto adapter functionality. The testsuite detects the HW/SW event & crypto devices and their capabilities. Depending upon the capability, adapter is confgured and modes are tested. Signed-off-by: Abhinandan Gujjar Acked-by: Akhil Goyal --- diff --git a/MAINTAINERS b/MAINTAINERS index 229ee3bd8f..8f297e449a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -366,6 +366,7 @@ Eventdev Crypto Adapter API - EXPERIMENTAL M: Abhinandan Gujjar T: git://dpdk.org/next/dpdk-next-eventdev F: lib/librte_eventdev/*crypto_adapter* +F: test/test/test_event_crypto_adapter.c Raw device API - EXPERIMENTAL M: Shreyansh Jain diff --git a/test/test/Makefile b/test/test/Makefile index 20118571b9..2b6fa3a647 100644 --- a/test/test/Makefile +++ b/test/test/Makefile @@ -185,6 +185,7 @@ SRCS-y += test_eventdev.c SRCS-y += test_event_ring.c SRCS-y += test_event_eth_rx_adapter.c SRCS-y += test_event_timer_adapter.c +SRCS-y += test_event_crypto_adapter.c endif ifeq ($(CONFIG_RTE_LIBRTE_RAWDEV),y) @@ -212,6 +213,7 @@ CFLAGS_test_memcpy_perf.o += -fno-var-tracking-assignments ifeq ($(shell test $(GCC_VERSION) -le 50 && echo 1), 1) CFLAGS_test_eventdev_sw.o += -Wno-missing-field-initializers CFLAGS_test_event_timer_adapter.o += -Wno-missing-field-initializers +CFLAGS_test_event_crypto_adapter.o += -Wno-missing-field-initializers endif endif endif diff --git a/test/test/test_event_crypto_adapter.c b/test/test/test_event_crypto_adapter.c new file mode 100644 index 0000000000..17eae5d993 --- /dev/null +++ b/test/test/test_event_crypto_adapter.c @@ -0,0 +1,927 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2018 Intel Corporation. + * All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "test.h" + +#define PKT_TRACE 0 +#define NUM 1 +#define DEFAULT_NUM_XFORMS (2) +#define NUM_MBUFS (8191) +#define MBUF_CACHE_SIZE (256) +#define MAXIMUM_IV_LENGTH (16) +#define DEFAULT_NUM_OPS_INFLIGHT (128) +#define TEST_APP_PORT_ID 0 +#define TEST_APP_EV_QUEUE_ID 0 +#define TEST_APP_EV_PRIORITY 0 +#define TEST_APP_EV_FLOWID 0xAABB +#define TEST_CRYPTO_EV_QUEUE_ID 1 +#define TEST_ADAPTER_ID 0 +#define TEST_CDEV_ID 0 +#define TEST_CDEV_QP_ID 0 +#define PACKET_LENGTH 64 +#define NB_TEST_PORTS 1 +#define NB_TEST_QUEUES 2 +#define NUM_CORES 1 +#define CRYPTODEV_NAME_NULL_PMD crypto_null + +#define MBUF_SIZE (sizeof(struct rte_mbuf) + \ + RTE_PKTMBUF_HEADROOM + PACKET_LENGTH) +#define IV_OFFSET (sizeof(struct rte_crypto_op) + \ + sizeof(struct rte_crypto_sym_op) + \ + DEFAULT_NUM_XFORMS * \ + sizeof(struct rte_crypto_sym_xform)) + +/* Handle log statements in same manner as test macros */ +#define LOG_DBG(...) RTE_LOG(DEBUG, EAL, __VA_ARGS__) + +static const uint8_t text_64B[] = { + 0x05, 0x15, 0x77, 0x32, 0xc9, 0x66, 0x91, 0x50, + 0x93, 0x9f, 0xbb, 0x4e, 0x2e, 0x5a, 0x02, 0xd0, + 0x2d, 0x9d, 0x31, 0x5d, 0xc8, 0x9e, 0x86, 0x36, + 0x54, 0x5c, 0x50, 0xe8, 0x75, 0x54, 0x74, 0x5e, + 0xd5, 0xa2, 0x84, 0x21, 0x2d, 0xc5, 0xf8, 0x1c, + 0x55, 0x1a, 0xba, 0x91, 0xce, 0xb5, 0xa3, 0x1e, + 0x31, 0xbf, 0xe9, 0xa1, 0x97, 0x5c, 0x2b, 0xd6, + 0x57, 0xa5, 0x9f, 0xab, 0xbd, 0xb0, 0x9b, 0x9c +}; + +struct event_crypto_adapter_test_params { + struct rte_mempool *mbuf_pool; + struct rte_mempool *op_mpool; + struct rte_mempool *session_mpool; + struct rte_cryptodev_config *config; + uint8_t crypto_event_port_id; +}; + +struct rte_event response_info = { + .queue_id = TEST_APP_EV_QUEUE_ID, + .sched_type = RTE_SCHED_TYPE_ATOMIC, + .flow_id = TEST_APP_EV_FLOWID, + .priority = TEST_APP_EV_PRIORITY +}; + +struct rte_event_crypto_request request_info = { + .cdev_id = TEST_CDEV_ID, + .queue_pair_id = TEST_CDEV_QP_ID +}; + +static struct event_crypto_adapter_test_params params; +static uint8_t crypto_adapter_setup_done; +static uint32_t slcore_id; +static int evdev; + +static struct rte_mbuf * +alloc_fill_mbuf(struct rte_mempool *mpool, const uint8_t *data, + size_t len, uint8_t blocksize) +{ + struct rte_mbuf *m = rte_pktmbuf_alloc(mpool); + size_t t_len = len - (blocksize ? (len % blocksize) : 0); + + if (m) { + char *dst = rte_pktmbuf_append(m, t_len); + + if (!dst) { + rte_pktmbuf_free(m); + return NULL; + } + + rte_memcpy(dst, (const void *)data, t_len); + } + return m; +} + +static int +send_recv_ev(struct rte_event *ev) +{ + struct rte_crypto_op *op; + struct rte_event recv_ev; + int ret; + + ret = rte_event_enqueue_burst(evdev, TEST_APP_PORT_ID, ev, NUM); + TEST_ASSERT_EQUAL(ret, NUM, + "Failed to send event to crypto adapter\n"); + + while (rte_event_dequeue_burst(evdev, + TEST_APP_PORT_ID, &recv_ev, NUM, 0) == 0) + rte_pause(); + + op = recv_ev.event_ptr; +#if PKT_TRACE + struct rte_mbuf *m = op->sym->m_src; + rte_pktmbuf_dump(stdout, m, rte_pktmbuf_pkt_len(m)); +#endif + rte_pktmbuf_free(op->sym->m_src); + rte_crypto_op_free(op); + + return TEST_SUCCESS; +} + +static int +test_crypto_adapter_stats(void) +{ + struct rte_event_crypto_adapter_stats stats; + + rte_event_crypto_adapter_stats_get(TEST_ADAPTER_ID, &stats); + printf(" +------------------------------------------------------+\n"); + printf(" + Crypto adapter stats for instance %u:\n", TEST_ADAPTER_ID); + printf(" + Event port poll count %" PRIx64 "\n", + stats.event_poll_count); + printf(" + Event dequeue count %" PRIx64 "\n", + stats.event_deq_count); + printf(" + Cryptodev enqueue count %" PRIx64 "\n", + stats.crypto_enq_count); + printf(" + Cryptodev enqueue failed count %" PRIx64 "\n", + stats.crypto_enq_fail); + printf(" + Cryptodev dequeue count %" PRIx64 "\n", + stats.crypto_deq_count); + printf(" + Event enqueue count %" PRIx64 "\n", + stats.event_enq_count); + printf(" + Event enqueue retry count %" PRIx64 "\n", + stats.event_enq_retry_count); + printf(" + Event enqueue fail count %" PRIx64 "\n", + stats.event_enq_fail_count); + printf(" +------------------------------------------------------+\n"); + + rte_event_crypto_adapter_stats_reset(TEST_ADAPTER_ID); + return TEST_SUCCESS; +} + +static int +test_op_forward_mode(uint8_t session_less) +{ + struct rte_crypto_sym_xform cipher_xform; + struct rte_cryptodev_sym_session *sess; + union rte_event_crypto_metadata m_data; + struct rte_crypto_sym_op *sym_op; + struct rte_crypto_op *op; + struct rte_mbuf *m; + struct rte_event ev; + uint32_t cap; + int ret; + + memset(&m_data, 0, sizeof(m_data)); + + m = alloc_fill_mbuf(params.mbuf_pool, text_64B, PACKET_LENGTH, 0); + TEST_ASSERT_NOT_NULL(m, "Failed to allocate mbuf!\n"); +#if PKT_TRACE + rte_pktmbuf_dump(stdout, m, rte_pktmbuf_pkt_len(m)); +#endif + /* Setup Cipher Parameters */ + cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER; + cipher_xform.next = NULL; + + cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_NULL; + cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT; + + op = rte_crypto_op_alloc(params.op_mpool, + RTE_CRYPTO_OP_TYPE_SYMMETRIC); + TEST_ASSERT_NOT_NULL(op, + "Failed to allocate symmetric crypto operation struct\n"); + + sym_op = op->sym; + + if (!session_less) { + sess = rte_cryptodev_sym_session_create(params.session_mpool); + TEST_ASSERT_NOT_NULL(sess, "Session creation failed\n"); + + /* Create Crypto session*/ + rte_cryptodev_sym_session_init(TEST_CDEV_ID, sess, + &cipher_xform, params.session_mpool); + + ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID, + evdev, &cap); + TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n"); + + if (cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_SESSION_PRIVATE_DATA) { + /* Fill in private date information */ + rte_memcpy(&m_data.response_info, &response_info, + sizeof(response_info)); + rte_memcpy(&m_data.request_info, &request_info, + sizeof(request_info)); + rte_cryptodev_sym_session_set_private_data(sess, + &m_data, sizeof(m_data)); + } + + rte_crypto_op_attach_sym_session(op, sess); + } else { + struct rte_crypto_sym_xform *first_xform; + + rte_crypto_op_sym_xforms_alloc(op, NUM); + op->sess_type = RTE_CRYPTO_OP_SESSIONLESS; + first_xform = &cipher_xform; + sym_op->xform = first_xform; + uint32_t len = IV_OFFSET + MAXIMUM_IV_LENGTH + + (sizeof(struct rte_crypto_sym_xform) * 2); + op->private_data_offset = len; + /* Fill in private data information */ + rte_memcpy(&m_data.response_info, &response_info, + sizeof(response_info)); + rte_memcpy(&m_data.request_info, &request_info, + sizeof(request_info)); + rte_memcpy((uint8_t *)op + len, &m_data, sizeof(m_data)); + } + + sym_op->m_src = m; + sym_op->cipher.data.offset = 0; + sym_op->cipher.data.length = PACKET_LENGTH; + + /* Fill in event info and update event_ptr with rte_crypto_op */ + memset(&ev, 0, sizeof(ev)); + ev.queue_id = TEST_CRYPTO_EV_QUEUE_ID; + ev.sched_type = RTE_SCHED_TYPE_ATOMIC; + ev.flow_id = 0xAABB; + ev.event_ptr = op; + + ret = send_recv_ev(&ev); + TEST_ASSERT_SUCCESS(ret, "Failed to send/receive event to " + "crypto adapter\n"); + + test_crypto_adapter_stats(); + + return TEST_SUCCESS; +} + +static int +map_adapter_service_core(void) +{ + uint32_t adapter_service_id; + int ret; + + if (rte_event_crypto_adapter_service_id_get(TEST_ADAPTER_ID, + &adapter_service_id) == 0) { + uint32_t core_list[NUM_CORES]; + + ret = rte_service_lcore_list(core_list, NUM_CORES); + TEST_ASSERT(ret >= 0, "Failed to get service core list!"); + + if (core_list[0] != slcore_id) { + TEST_ASSERT_SUCCESS(rte_service_lcore_add(slcore_id), + "Failed to add service core"); + TEST_ASSERT_SUCCESS(rte_service_lcore_start(slcore_id), + "Failed to start service core"); + } + + TEST_ASSERT_SUCCESS(rte_service_map_lcore_set( + adapter_service_id, slcore_id, 1), + "Failed to map adapter service"); + } + + return TEST_SUCCESS; +} + +static int +test_sessionless_with_op_forward_mode(void) +{ + uint32_t cap; + int ret; + + ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID, evdev, &cap); + TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n"); + + if (!(cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD)) + map_adapter_service_core(); + + TEST_ASSERT_SUCCESS(rte_event_crypto_adapter_start(TEST_ADAPTER_ID), + "Failed to start event crypto adapter"); + + ret = test_op_forward_mode(1); + TEST_ASSERT_SUCCESS(ret, "Sessionless - FORWARD mode test failed\n"); + return TEST_SUCCESS; +} + +static int +test_session_with_op_forward_mode(void) +{ + uint32_t cap; + int ret; + + ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID, evdev, &cap); + TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n"); + + if (!(cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD)) + map_adapter_service_core(); + + TEST_ASSERT_SUCCESS(rte_event_crypto_adapter_start(TEST_ADAPTER_ID + ), "Failed to start event crypto adapter"); + + ret = test_op_forward_mode(0); + TEST_ASSERT_SUCCESS(ret, "Session based - FORWARD mode test failed\n"); + return TEST_SUCCESS; +} + +static int +send_op_recv_ev(struct rte_crypto_op *op) +{ + struct rte_crypto_op *recv_op; + struct rte_event ev; + int ret; + + ret = rte_cryptodev_enqueue_burst(TEST_CDEV_ID, TEST_CDEV_QP_ID, + &op, NUM); + TEST_ASSERT_EQUAL(ret, NUM, "Failed to enqueue to cryptodev\n"); + memset(&ev, 0, sizeof(ev)); + + while (rte_event_dequeue_burst(evdev, + TEST_APP_PORT_ID, &ev, NUM, 0) == 0) + rte_pause(); + + recv_op = ev.event_ptr; +#if PKT_TRACE + struct rte_mbuf *m = recv_op->sym->m_src; + rte_pktmbuf_dump(stdout, m, rte_pktmbuf_pkt_len(m)); +#endif + rte_pktmbuf_free(recv_op->sym->m_src); + rte_crypto_op_free(recv_op); + + return TEST_SUCCESS; +} + +static int +test_op_new_mode(uint8_t session_less) +{ + struct rte_crypto_sym_xform cipher_xform; + struct rte_cryptodev_sym_session *sess; + union rte_event_crypto_metadata m_data; + struct rte_crypto_sym_op *sym_op; + struct rte_crypto_op *op; + struct rte_mbuf *m; + uint32_t cap; + int ret; + + memset(&m_data, 0, sizeof(m_data)); + + m = alloc_fill_mbuf(params.mbuf_pool, text_64B, PACKET_LENGTH, 0); + TEST_ASSERT_NOT_NULL(m, "Failed to allocate mbuf!\n"); +#if PKT_TRACE + rte_pktmbuf_dump(stdout, m, rte_pktmbuf_pkt_len(m)); +#endif + /* Setup Cipher Parameters */ + cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER; + cipher_xform.next = NULL; + + cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_NULL; + cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT; + + op = rte_crypto_op_alloc(params.op_mpool, + RTE_CRYPTO_OP_TYPE_SYMMETRIC); + TEST_ASSERT_NOT_NULL(op, "Failed to allocate crypto_op!\n"); + + sym_op = op->sym; + + if (!session_less) { + sess = rte_cryptodev_sym_session_create(params.session_mpool); + TEST_ASSERT_NOT_NULL(sess, "Session creation failed\n"); + + ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID, + evdev, &cap); + TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n"); + + if (cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_SESSION_PRIVATE_DATA) { + /* Fill in private data information */ + rte_memcpy(&m_data.response_info, &response_info, + sizeof(m_data)); + rte_cryptodev_sym_session_set_private_data(sess, + &m_data, sizeof(m_data)); + } + rte_cryptodev_sym_session_init(TEST_CDEV_ID, sess, + &cipher_xform, params.session_mpool); + rte_crypto_op_attach_sym_session(op, sess); + } else { + struct rte_crypto_sym_xform *first_xform; + + rte_crypto_op_sym_xforms_alloc(op, NUM); + op->sess_type = RTE_CRYPTO_OP_SESSIONLESS; + first_xform = &cipher_xform; + sym_op->xform = first_xform; + uint32_t len = IV_OFFSET + MAXIMUM_IV_LENGTH + + (sizeof(struct rte_crypto_sym_xform) * 2); + op->private_data_offset = len; + /* Fill in private data information */ + rte_memcpy(&m_data.response_info, &response_info, + sizeof(m_data)); + rte_memcpy((uint8_t *)op + len, &m_data, sizeof(m_data)); + } + + sym_op->m_src = m; + sym_op->cipher.data.offset = 0; + sym_op->cipher.data.length = PACKET_LENGTH; + + ret = send_op_recv_ev(op); + TEST_ASSERT_SUCCESS(ret, "Failed to enqueue op to cryptodev\n"); + + test_crypto_adapter_stats(); + + return TEST_SUCCESS; +} + +static int +test_sessionless_with_op_new_mode(void) +{ + uint32_t cap; + int ret; + + ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID, evdev, &cap); + TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n"); + + if (!(cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD) || + !(cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_NEW)) + map_adapter_service_core(); + + /* start the event crypto adapter */ + TEST_ASSERT_SUCCESS(rte_event_crypto_adapter_start(TEST_ADAPTER_ID), + "Failed to start event crypto adapter"); + + ret = test_op_new_mode(1); + TEST_ASSERT_SUCCESS(ret, "Sessionless - NEW mode test failed\n"); + return TEST_SUCCESS; +} + +static int +test_session_with_op_new_mode(void) +{ + uint32_t cap; + int ret; + + ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID, evdev, &cap); + TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n"); + + if (!(cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD) || + !(cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_NEW)) + map_adapter_service_core(); + + TEST_ASSERT_SUCCESS(rte_event_crypto_adapter_start(TEST_ADAPTER_ID), + "Failed to start event crypto adapter"); + + ret = test_op_new_mode(0); + TEST_ASSERT_SUCCESS(ret, "Session based - NEW mode test failed\n"); + return TEST_SUCCESS; +} + +static int +configure_cryptodev(void) +{ + struct rte_cryptodev_qp_conf qp_conf; + struct rte_cryptodev_config conf; + struct rte_cryptodev_info info; + unsigned int session_size; + uint8_t nb_devs; + int ret; + + params.mbuf_pool = rte_pktmbuf_pool_create( + "CRYPTO_ADAPTER_MBUFPOOL", + NUM_MBUFS, MBUF_CACHE_SIZE, 0, MBUF_SIZE, + rte_socket_id()); + if (params.mbuf_pool == NULL) { + RTE_LOG(ERR, USER1, "Can't create CRYPTO_MBUFPOOL\n"); + return TEST_FAILED; + } + + params.op_mpool = rte_crypto_op_pool_create( + "EVENT_CRYPTO_SYM_OP_POOL", + RTE_CRYPTO_OP_TYPE_SYMMETRIC, + NUM_MBUFS, MBUF_CACHE_SIZE, + DEFAULT_NUM_XFORMS * + sizeof(struct rte_crypto_sym_xform) + + MAXIMUM_IV_LENGTH, + rte_socket_id()); + if (params.op_mpool == NULL) { + RTE_LOG(ERR, USER1, "Can't create CRYPTO_OP_POOL\n"); + return TEST_FAILED; + } + + /* Create a NULL crypto device */ + nb_devs = rte_cryptodev_device_count_by_driver( + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_NULL_PMD))); + if (!nb_devs) { + ret = rte_vdev_init( + RTE_STR(CRYPTODEV_NAME_NULL_PMD), NULL); + + TEST_ASSERT(ret == 0, "Failed to create pmd:%s instance\n", + RTE_STR(CRYPTODEV_NAME_NULL_PMD)); + } + + nb_devs = rte_cryptodev_count(); + if (!nb_devs) { + RTE_LOG(ERR, USER1, "No crypto devices found!\n"); + return TEST_FAILED; + } + + /* + * Create mempool with maximum number of sessions * 2, + * to include the session headers & private data + */ + session_size = rte_cryptodev_get_private_session_size(TEST_CDEV_ID); + session_size += sizeof(union rte_event_crypto_metadata); + + params.session_mpool = rte_mempool_create( + "CRYPTO_ADAPTER_SESSION_MP", + info.sym.max_nb_sessions * 2, + session_size, + 0, 0, NULL, NULL, NULL, + NULL, SOCKET_ID_ANY, + 0); + + TEST_ASSERT_NOT_NULL(params.session_mpool, + "session mempool allocation failed\n"); + + rte_cryptodev_info_get(TEST_CDEV_ID, &info); + conf.nb_queue_pairs = info.max_nb_queue_pairs; + conf.socket_id = SOCKET_ID_ANY; + + TEST_ASSERT_SUCCESS(rte_cryptodev_configure(TEST_CDEV_ID, &conf), + "Failed to configure cryptodev %u with %u qps\n", + TEST_CDEV_ID, conf.nb_queue_pairs); + + qp_conf.nb_descriptors = DEFAULT_NUM_OPS_INFLIGHT; + + TEST_ASSERT_SUCCESS(rte_cryptodev_queue_pair_setup( + TEST_CDEV_ID, TEST_CDEV_QP_ID, &qp_conf, + rte_cryptodev_socket_id(TEST_CDEV_ID), + params.session_mpool), + "Failed to setup queue pair %u on cryptodev %u\n", + TEST_CDEV_QP_ID, TEST_CDEV_ID); + + return TEST_SUCCESS; +} + +static inline void +evdev_set_conf_values(struct rte_event_dev_config *dev_conf, + struct rte_event_dev_info *info) +{ + memset(dev_conf, 0, sizeof(struct rte_event_dev_config)); + dev_conf->dequeue_timeout_ns = info->min_dequeue_timeout_ns; + dev_conf->nb_event_ports = NB_TEST_PORTS; + dev_conf->nb_event_queues = NB_TEST_QUEUES; + dev_conf->nb_event_queue_flows = info->max_event_queue_flows; + dev_conf->nb_event_port_dequeue_depth = + info->max_event_port_dequeue_depth; + dev_conf->nb_event_port_enqueue_depth = + info->max_event_port_enqueue_depth; + dev_conf->nb_event_port_enqueue_depth = + info->max_event_port_enqueue_depth; + dev_conf->nb_events_limit = + info->max_num_events; +} + +static int +configure_eventdev(void) +{ + struct rte_event_queue_conf queue_conf; + struct rte_event_dev_config devconf; + struct rte_event_dev_info info; + uint32_t queue_count; + uint32_t port_count; + int ret; + uint8_t qid; + + if (!rte_event_dev_count()) { + /* If there is no hardware eventdev, or no software vdev was + * specified on the command line, create an instance of + * event_sw. + */ + LOG_DBG("Failed to find a valid event device... " + "testing with event_sw device\n"); + TEST_ASSERT_SUCCESS(rte_vdev_init("event_sw0", NULL), + "Error creating eventdev"); + evdev = rte_event_dev_get_dev_id("event_sw0"); + } + + ret = rte_event_dev_info_get(evdev, &info); + TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info\n"); + + evdev_set_conf_values(&devconf, &info); + + ret = rte_event_dev_configure(evdev, &devconf); + TEST_ASSERT_SUCCESS(ret, "Failed to configure eventdev\n"); + + /* Set up event queue */ + ret = rte_event_dev_attr_get(evdev, RTE_EVENT_DEV_ATTR_QUEUE_COUNT, + &queue_count); + TEST_ASSERT_SUCCESS(ret, "Queue count get failed\n"); + TEST_ASSERT_EQUAL(queue_count, 2, "Unexpected queue count\n"); + + qid = TEST_APP_EV_QUEUE_ID; + ret = rte_event_queue_setup(evdev, qid, NULL); + TEST_ASSERT_SUCCESS(ret, "Failed to setup queue=%d\n", qid); + + queue_conf.nb_atomic_flows = info.max_event_queue_flows; + queue_conf.nb_atomic_order_sequences = 32; + queue_conf.schedule_type = RTE_SCHED_TYPE_ATOMIC; + queue_conf.priority = RTE_EVENT_DEV_PRIORITY_HIGHEST; + queue_conf.event_queue_cfg = RTE_EVENT_QUEUE_CFG_SINGLE_LINK; + + qid = TEST_CRYPTO_EV_QUEUE_ID; + ret = rte_event_queue_setup(evdev, qid, &queue_conf); + TEST_ASSERT_SUCCESS(ret, "Failed to setup queue=%u\n", qid); + + /* Set up event port */ + ret = rte_event_dev_attr_get(evdev, RTE_EVENT_DEV_ATTR_PORT_COUNT, + &port_count); + TEST_ASSERT_SUCCESS(ret, "Port count get failed\n"); + TEST_ASSERT_EQUAL(port_count, 1, "Unexpected port count\n"); + + ret = rte_event_port_setup(evdev, TEST_APP_PORT_ID, NULL); + TEST_ASSERT_SUCCESS(ret, "Failed to setup port=%d\n", + TEST_APP_PORT_ID); + + qid = TEST_APP_EV_QUEUE_ID; + ret = rte_event_port_link(evdev, TEST_APP_PORT_ID, &qid, NULL, 1); + TEST_ASSERT(ret >= 0, "Failed to link queue port=%d\n", + TEST_APP_PORT_ID); + + return TEST_SUCCESS; +} + +static void +test_crypto_adapter_free(void) +{ + rte_event_crypto_adapter_free(TEST_ADAPTER_ID); +} + +static int +test_crypto_adapter_create(void) +{ + struct rte_event_port_conf conf = { + .dequeue_depth = 8, + .enqueue_depth = 8, + .new_event_threshold = 1200, + }; + int ret; + + /* Create adapter with default port creation callback */ + ret = rte_event_crypto_adapter_create(TEST_ADAPTER_ID, + TEST_CDEV_ID, + &conf, 0); + TEST_ASSERT_SUCCESS(ret, "Failed to create event crypto adapter\n"); + + return TEST_SUCCESS; +} + +static int +test_crypto_adapter_qp_add_del(void) +{ + uint32_t cap; + int ret; + + ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID, evdev, &cap); + TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n"); + + if (cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND) { + ret = rte_event_crypto_adapter_queue_pair_add(TEST_ADAPTER_ID, + TEST_CDEV_ID, TEST_CDEV_QP_ID, &response_info); + } else + ret = rte_event_crypto_adapter_queue_pair_add(TEST_ADAPTER_ID, + TEST_CDEV_ID, TEST_CDEV_QP_ID, NULL); + + TEST_ASSERT_SUCCESS(ret, "Failed to create add queue pair\n"); + + ret = rte_event_crypto_adapter_queue_pair_del(TEST_ADAPTER_ID, + TEST_CDEV_ID, TEST_CDEV_QP_ID); + TEST_ASSERT_SUCCESS(ret, "Failed to delete add queue pair\n"); + + return TEST_SUCCESS; +} + +static int +configure_event_crypto_adapter(enum rte_event_crypto_adapter_mode mode) +{ + struct rte_event_port_conf conf = { + .dequeue_depth = 8, + .enqueue_depth = 8, + .new_event_threshold = 1200, + }; + + uint32_t cap; + int ret; + + /* Create adapter with default port creation callback */ + ret = rte_event_crypto_adapter_create(TEST_ADAPTER_ID, + TEST_CDEV_ID, + &conf, mode); + TEST_ASSERT_SUCCESS(ret, "Failed to create event crypto adapter\n"); + + ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID, evdev, &cap); + TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n"); + + if (cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND) { + ret = rte_event_crypto_adapter_queue_pair_add(TEST_ADAPTER_ID, + TEST_CDEV_ID, TEST_CDEV_QP_ID, &response_info); + } else + ret = rte_event_crypto_adapter_queue_pair_add(TEST_ADAPTER_ID, + TEST_CDEV_ID, TEST_CDEV_QP_ID, NULL); + + TEST_ASSERT_SUCCESS(ret, "Failed to add queue pair\n"); + + ret = rte_event_crypto_adapter_event_port_get(TEST_ADAPTER_ID, + ¶ms.crypto_event_port_id); + TEST_ASSERT_SUCCESS(ret, "Failed to get event port\n"); + + return TEST_SUCCESS; +} + +static void +test_crypto_adapter_stop(void) +{ + uint32_t evdev_service_id, adapter_service_id; + + /* retrieve service ids & stop services */ + if (rte_event_crypto_adapter_service_id_get(TEST_ADAPTER_ID, + &adapter_service_id) == 0) { + rte_service_runstate_set(adapter_service_id, 0); + rte_service_lcore_stop(slcore_id); + rte_service_lcore_del(slcore_id); + rte_event_crypto_adapter_stop(TEST_ADAPTER_ID); + } + + if (rte_event_dev_service_id_get(evdev, &evdev_service_id) == 0) { + rte_service_runstate_set(evdev_service_id, 0); + rte_service_lcore_stop(slcore_id); + rte_service_lcore_del(slcore_id); + rte_event_dev_stop(evdev); + } +} + +static int +test_crypto_adapter_conf(enum rte_event_crypto_adapter_mode mode) +{ + uint32_t evdev_service_id; + uint8_t qid; + int ret; + + if (!crypto_adapter_setup_done) { + ret = configure_event_crypto_adapter(mode); + if (!ret) { + qid = TEST_CRYPTO_EV_QUEUE_ID; + ret = rte_event_port_link(evdev, + params.crypto_event_port_id, &qid, NULL, 1); + TEST_ASSERT(ret >= 0, "Failed to link queue %d " + "port=%u\n", qid, + params.crypto_event_port_id); + } + crypto_adapter_setup_done = 1; + } + + /* retrieve service ids */ + if (rte_event_dev_service_id_get(evdev, &evdev_service_id) == 0) { + /* add a service core and start it */ + TEST_ASSERT_SUCCESS(rte_service_lcore_add(slcore_id), + "Failed to add service core"); + TEST_ASSERT_SUCCESS(rte_service_lcore_start(slcore_id), + "Failed to start service core"); + + /* map services to it */ + TEST_ASSERT_SUCCESS(rte_service_map_lcore_set(evdev_service_id, + slcore_id, 1), "Failed to map evdev service"); + + /* set services to running */ + TEST_ASSERT_SUCCESS(rte_service_runstate_set(evdev_service_id, + 1), "Failed to start evdev service"); + } + + /* start the eventdev */ + TEST_ASSERT_SUCCESS(rte_event_dev_start(evdev), + "Failed to start event device"); + + return TEST_SUCCESS; +} + +static int +test_crypto_adapter_conf_op_forward_mode(void) +{ + enum rte_event_crypto_adapter_mode mode; + + mode = RTE_EVENT_CRYPTO_ADAPTER_OP_FORWARD; + test_crypto_adapter_conf(mode); + + return TEST_SUCCESS; +} + +static int +test_crypto_adapter_conf_op_new_mode(void) +{ + enum rte_event_crypto_adapter_mode mode; + + mode = RTE_EVENT_CRYPTO_ADAPTER_OP_NEW; + test_crypto_adapter_conf(mode); + return TEST_SUCCESS; +} + + +static int +testsuite_setup(void) +{ + int ret; + + slcore_id = rte_get_next_lcore(-1, 1, 0); + TEST_ASSERT_NOT_EQUAL(slcore_id, RTE_MAX_LCORE, "At least 2 lcores " + "are required to run this autotest\n"); + + /* Setup and start event device. */ + ret = configure_eventdev(); + TEST_ASSERT_SUCCESS(ret, "Failed to setup eventdev\n"); + + /* Setup and start crypto device. */ + ret = configure_cryptodev(); + TEST_ASSERT_SUCCESS(ret, "cryptodev initialization failed\n"); + + return TEST_SUCCESS; +} + +static void +crypto_teardown(void) +{ + /* Free mbuf mempool */ + if (params.mbuf_pool != NULL) { + RTE_LOG(DEBUG, USER1, "CRYPTO_ADAPTER_MBUFPOOL count %u\n", + rte_mempool_avail_count(params.mbuf_pool)); + rte_mempool_free(params.mbuf_pool); + params.mbuf_pool = NULL; + } + + /* Free session mempool */ + if (params.session_mpool != NULL) { + RTE_LOG(DEBUG, USER1, "CRYPTO_ADAPTER_SESSION_MP count %u\n", + rte_mempool_avail_count(params.session_mpool)); + rte_mempool_free(params.session_mpool); + params.session_mpool = NULL; + } + + /* Free ops mempool */ + if (params.op_mpool != NULL) { + RTE_LOG(DEBUG, USER1, "EVENT_CRYPTO_SYM_OP_POOL count %u\n", + rte_mempool_avail_count(params.op_mpool)); + rte_mempool_free(params.op_mpool); + params.op_mpool = NULL; + } +} + +static void +eventdev_teardown(void) +{ + rte_event_dev_stop(evdev); +} + +static void +testsuite_teardown(void) +{ + crypto_teardown(); + eventdev_teardown(); +} + +static struct unit_test_suite functional_testsuite = { + .suite_name = "Event crypto adapter test suite", + .setup = testsuite_setup, + .teardown = testsuite_teardown, + .unit_test_cases = { + + TEST_CASE_ST(NULL, test_crypto_adapter_free, + test_crypto_adapter_create), + + TEST_CASE_ST(test_crypto_adapter_create, + test_crypto_adapter_free, + test_crypto_adapter_qp_add_del), + + TEST_CASE_ST(test_crypto_adapter_create, + test_crypto_adapter_free, + test_crypto_adapter_stats), + + TEST_CASE_ST(test_crypto_adapter_conf_op_forward_mode, + test_crypto_adapter_stop, + test_session_with_op_forward_mode), + + TEST_CASE_ST(test_crypto_adapter_conf_op_forward_mode, + test_crypto_adapter_stop, + test_sessionless_with_op_forward_mode), + + TEST_CASE_ST(test_crypto_adapter_conf_op_new_mode, + test_crypto_adapter_stop, + test_session_with_op_new_mode), + + TEST_CASE_ST(test_crypto_adapter_conf_op_new_mode, + test_crypto_adapter_stop, + test_sessionless_with_op_new_mode), + + TEST_CASES_END() /**< NULL terminate unit test array */ + } +}; + +static int +test_event_crypto_adapter(void) +{ + return unit_test_suite_runner(&functional_testsuite); +} + +REGISTER_TEST_COMMAND(event_crypto_adapter_autotest, + test_event_crypto_adapter);