From: Darek Stojaczyk Date: Wed, 3 Oct 2018 12:39:25 +0000 (+0200) Subject: vfio: share default container in multi-process X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=6bcb7c95fe14544bca9de1a698e4553533192197;p=dpdk.git vfio: share default container in multi-process So far each process in MP used to have a separate container and relied on the primary process to register all memsegs. Mapping external memory via rte_vfio_container_dma_map() in secondary processes was broken, because the default (process-local) container had no groups bound. There was even no way to bind any groups to it, because the container fd was deeply encapsulated within EAL. This patch introduces a new SOCKET_REQ_DEFAULT_CONTAINER message type for MP synchronization, makes all processes within a MP party use a single default container, and hence fixes rte_vfio_container_dma_map() for secondary processes. From what I checked this behavior was always the same, but started to be invalid/insufficient once mapping external memory was allowed. While here, fix up the comment on rte_vfio_get_container_fd(). This function always opens a new container, never reuses an old one. Fixes: 73a639085938 ("vfio: allow to map other memory regions") Cc: stable@dpdk.org Signed-off-by: Darek Stojaczyk Reviewed-by: Anatoly Burakov --- diff --git a/lib/librte_eal/common/include/rte_vfio.h b/lib/librte_eal/common/include/rte_vfio.h index 7d66438b59..cae96fab90 100644 --- a/lib/librte_eal/common/include/rte_vfio.h +++ b/lib/librte_eal/common/include/rte_vfio.h @@ -256,7 +256,7 @@ rte_vfio_get_group_num(const char *sysfs_base, const char *dev_addr, int *iommu_group_num); /** - * Open VFIO container fd or get an existing one + * Open a new VFIO container fd * * This function is only relevant to linux and will return * an error on BSD. diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.c b/lib/librte_eal/linuxapp/eal/eal_vfio.c index 13a8b1811c..0516b1597b 100644 --- a/lib/librte_eal/linuxapp/eal/eal_vfio.c +++ b/lib/librte_eal/linuxapp/eal/eal_vfio.c @@ -910,7 +910,15 @@ rte_vfio_enable(const char *modname) return 0; } - default_vfio_cfg->vfio_container_fd = rte_vfio_get_container_fd(); + if (internal_config.process_type == RTE_PROC_PRIMARY) { + /* open a new container */ + default_vfio_cfg->vfio_container_fd = + rte_vfio_get_container_fd(); + } else { + /* get the default container from the primary process */ + default_vfio_cfg->vfio_container_fd = + vfio_get_default_container_fd(); + } /* check if we have VFIO driver enabled */ if (default_vfio_cfg->vfio_container_fd != -1) { @@ -930,6 +938,45 @@ rte_vfio_is_enabled(const char *modname) return default_vfio_cfg->vfio_enabled && mod_available; } +int +vfio_get_default_container_fd(void) +{ + struct rte_mp_msg mp_req, *mp_rep; + struct rte_mp_reply mp_reply; + struct timespec ts = {.tv_sec = 5, .tv_nsec = 0}; + struct vfio_mp_param *p = (struct vfio_mp_param *)mp_req.param; + + if (default_vfio_cfg->vfio_enabled) + return default_vfio_cfg->vfio_container_fd; + + if (internal_config.process_type == RTE_PROC_PRIMARY) { + /* if we were secondary process we would try requesting + * container fd from the primary, but we're the primary + * process so just exit here + */ + return -1; + } + + p->req = SOCKET_REQ_DEFAULT_CONTAINER; + strcpy(mp_req.name, EAL_VFIO_MP); + mp_req.len_param = sizeof(*p); + mp_req.num_fds = 0; + + if (rte_mp_request_sync(&mp_req, &mp_reply, &ts) == 0 && + mp_reply.nb_received == 1) { + mp_rep = &mp_reply.msgs[0]; + p = (struct vfio_mp_param *)mp_rep->param; + if (p->result == SOCKET_OK && mp_rep->num_fds == 1) { + free(mp_reply.msgs); + return mp_rep->fds[0]; + } + free(mp_reply.msgs); + } + + RTE_LOG(ERR, EAL, " cannot request default container fd\n"); + return -1; +} + const struct vfio_iommu_type * vfio_set_iommu_type(int vfio_container_fd) { diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.h b/lib/librte_eal/linuxapp/eal/eal_vfio.h index 68d4750a5c..63ae115c39 100644 --- a/lib/librte_eal/linuxapp/eal/eal_vfio.h +++ b/lib/librte_eal/linuxapp/eal/eal_vfio.h @@ -115,6 +115,9 @@ struct vfio_iommu_type { vfio_dma_func_t dma_map_func; }; +/* get the vfio container that devices are bound to by default */ +int vfio_get_default_container_fd(void); + /* pick IOMMU type. returns a pointer to vfio_iommu_type or NULL for error */ const struct vfio_iommu_type * vfio_set_iommu_type(int vfio_container_fd); @@ -129,6 +132,7 @@ int vfio_mp_sync_setup(void); #define SOCKET_REQ_CONTAINER 0x100 #define SOCKET_REQ_GROUP 0x200 +#define SOCKET_REQ_DEFAULT_CONTAINER 0x400 #define SOCKET_OK 0x0 #define SOCKET_NO_FD 0x1 #define SOCKET_ERR 0xFF diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c b/lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c index 680a24aae9..a1e8c834f8 100644 --- a/lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c +++ b/lib/librte_eal/linuxapp/eal/eal_vfio_mp_sync.c @@ -66,6 +66,17 @@ vfio_mp_primary(const struct rte_mp_msg *msg, const void *peer) reply.fds[0] = fd; } break; + case SOCKET_REQ_DEFAULT_CONTAINER: + r->req = SOCKET_REQ_DEFAULT_CONTAINER; + fd = vfio_get_default_container_fd(); + if (fd < 0) + r->result = SOCKET_ERR; + else { + r->result = SOCKET_OK; + reply.num_fds = 1; + reply.fds[0] = fd; + } + break; default: RTE_LOG(ERR, EAL, "vfio received invalid message!\n"); return -1;