From: Slawomir Mrozowicz Date: Fri, 30 Jun 2017 14:34:21 +0000 (+0100) Subject: cryptodev: remove crypto device type enumeration X-Git-Tag: spdx-start~2660 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=7a364faef185578f5787cf14b4159739c2bae29e;p=dpdk.git cryptodev: remove crypto device type enumeration Changes device type identification to be based on a unique driver id replacing the current device type enumeration, which needed library changes every time a new crypto driver was added. The driver id is assigned dynamically during driver registration using the new macro RTE_PMD_REGISTER_CRYPTO_DRIVER which returns a unique uint8_t identifier for that driver. New APIs are also introduced to allow retrieval of the driver id using the driver name. Signed-off-by: Slawomir Mrozowicz Signed-off-by: Pablo de Lara Acked-by: Declan Doherty --- diff --git a/doc/guides/prog_guide/cryptodev_lib.rst b/doc/guides/prog_guide/cryptodev_lib.rst index f250c009a3..8feaeced27 100644 --- a/doc/guides/prog_guide/cryptodev_lib.rst +++ b/doc/guides/prog_guide/cryptodev_lib.rst @@ -293,7 +293,7 @@ relevant information for the device. struct rte_cryptodev_info { const char *driver_name; - enum rte_cryptodev_type dev_type; + uint8_t driver_id; struct rte_pci_device *pci_dev; uint64_t feature_flags; @@ -452,7 +452,8 @@ functions for the configuration of the session parameters and freeing function so the PMD can managed the memory on destruction of a session. **Note**: Sessions created on a particular device can only be used on Crypto -devices of the same type, and if you try to use a session on a device different +devices of the same type - the same driver id used by this devices, +and if you try to use a session on a device different to that on which it was created then the Crypto operation will fail. ``rte_cryptodev_sym_session_create()`` is used to create a symmetric session on diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index 511a898003..042d4d7869 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -57,22 +57,10 @@ Deprecation Notices * cryptodev: All PMD names definitions will be moved to the individual PMDs in 17.08. -* cryptodev: The following changes will be done in in 17.08: - - - the device type enumeration ``rte_cryptodev_type`` will be removed - - the following structures will be changed: ``rte_cryptodev_session``, - ``rte_cryptodev_sym_session``, ``rte_cryptodev_info``, ``rte_cryptodev`` - - the function ``rte_cryptodev_count_devtype`` will be replaced by - ``rte_cryptodev_device_count_by_driver`` - * cryptodev: API changes are planned for 17.08 for the sessions management to make it agnostic to the underlying devices, removing coupling with crypto PMDs, so a single session can be used on multiple devices. - - ``struct rte_cryptodev_sym_session``, dev_id, dev_type will be removed, - _private field changed to the indirect array of private data pointers of - all supported devices - An API of followed functions will be changed to allow operate on multiple devices with one session: diff --git a/doc/guides/rel_notes/release_17_08.rst b/doc/guides/rel_notes/release_17_08.rst index 24a2679095..63f55300e3 100644 --- a/doc/guides/rel_notes/release_17_08.rst +++ b/doc/guides/rel_notes/release_17_08.rst @@ -113,6 +113,7 @@ New Features * Added AEAD algorithm specific functions and structures, so it is not necessary to use a combination of cipher and authentication structures anymore. + * Added helper functions for crypto device driver identification. * **Updated dpaa2_sec crypto PMD.** @@ -201,6 +202,15 @@ API Changes Also, make sure to start the actual text at the margin. ========================================================= +* **Reworked rte_cryptodev library.** + + The rte_cryptodev library has been reworked and updated. The following changes + have been made to it: + + * The crypto device type enumeration has been removed from cryptodev library. + * The function ``rte_crypto_count_devtype()`` has been removed, and replaced + by the new function ``rte_crypto_count_by_driver()``. + ABI Changes ----------- @@ -231,6 +241,10 @@ ABI Changes * Changed field size of digest length from uint32_t to uint16_t. * Removed AAD length. +* Replaced ``dev_type`` enumeration with uint8_t ``driver_id`` in + ``rte_cryptodev_info``, ``rte_cryptodev`` and ``rte_cryptodev_sym_session`` + structures. + Shared Library Versions ----------------------- diff --git a/drivers/crypto/aesni_gcm/aesni_gcm_pmd.c b/drivers/crypto/aesni_gcm/aesni_gcm_pmd.c index 806df92f6b..1ef83faebd 100644 --- a/drivers/crypto/aesni_gcm/aesni_gcm_pmd.c +++ b/drivers/crypto/aesni_gcm/aesni_gcm_pmd.c @@ -43,6 +43,7 @@ #include "aesni_gcm_pmd_private.h" +static uint8_t cryptodev_driver_id; /** Parse crypto xform chain and set private session parameters */ int @@ -154,8 +155,8 @@ aesni_gcm_get_session(struct aesni_gcm_qp *qp, struct rte_crypto_op *op) struct rte_crypto_sym_op *sym_op = op->sym; if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) { - if (unlikely(sym_op->session->dev_type - != RTE_CRYPTODEV_AESNI_GCM_PMD)) + if (unlikely(sym_op->session->driver_id != + cryptodev_driver_id)) return sess; sess = (struct aesni_gcm_session *)sym_op->session->_private; @@ -521,7 +522,7 @@ aesni_gcm_create(const char *name, goto init_error; } - dev->dev_type = RTE_CRYPTODEV_AESNI_GCM_PMD; + dev->driver_id = cryptodev_driver_id; dev->dev_ops = rte_aesni_gcm_pmd_ops; /* register rx/tx burst functions for data path */ @@ -620,3 +621,4 @@ RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_AESNI_GCM_PMD, "max_nb_queue_pairs= " "max_nb_sessions= " "socket_id="); +RTE_PMD_REGISTER_CRYPTO_DRIVER(aesni_gcm_pmd_drv, cryptodev_driver_id); diff --git a/drivers/crypto/aesni_gcm/aesni_gcm_pmd_ops.c b/drivers/crypto/aesni_gcm/aesni_gcm_pmd_ops.c index ddc4c3000f..85c7485aac 100644 --- a/drivers/crypto/aesni_gcm/aesni_gcm_pmd_ops.c +++ b/drivers/crypto/aesni_gcm/aesni_gcm_pmd_ops.c @@ -167,7 +167,7 @@ aesni_gcm_pmd_info_get(struct rte_cryptodev *dev, struct aesni_gcm_private *internals = dev->data->dev_private; if (dev_info != NULL) { - dev_info->dev_type = dev->dev_type; + dev_info->driver_id = dev->driver_id; dev_info->feature_flags = dev->feature_flags; dev_info->capabilities = aesni_gcm_pmd_capabilities; diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c index 8a96fec98d..4dab8494d5 100644 --- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c +++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c @@ -41,6 +41,8 @@ #include "rte_aesni_mb_pmd_private.h" +static uint8_t cryptodev_driver_id; + typedef void (*hash_one_block_t)(const void *data, void *digest); typedef void (*aes_keyexp_t)(const void *key, void *enc_exp_keys, void *dec_exp_keys); @@ -353,8 +355,8 @@ get_session(struct aesni_mb_qp *qp, struct rte_crypto_op *op) struct aesni_mb_session *sess = NULL; if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) { - if (unlikely(op->sym->session->dev_type != - RTE_CRYPTODEV_AESNI_MB_PMD)) { + if (unlikely(op->sym->session->driver_id != + cryptodev_driver_id)) { return NULL; } @@ -707,7 +709,7 @@ cryptodev_aesni_mb_create(const char *name, goto init_error; } - dev->dev_type = RTE_CRYPTODEV_AESNI_MB_PMD; + dev->driver_id = cryptodev_driver_id; dev->dev_ops = rte_aesni_mb_pmd_ops; /* register rx/tx burst functions for data path */ @@ -808,3 +810,4 @@ RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_AESNI_MB_PMD, "max_nb_queue_pairs= " "max_nb_sessions= " "socket_id="); +RTE_PMD_REGISTER_CRYPTO_DRIVER(cryptodev_aesni_mb_pmd_drv, cryptodev_driver_id); diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c index ad32bf9715..b5abb6ce2e 100644 --- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c +++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c @@ -328,7 +328,7 @@ aesni_mb_pmd_info_get(struct rte_cryptodev *dev, struct aesni_mb_private *internals = dev->data->dev_private; if (dev_info != NULL) { - dev_info->dev_type = dev->dev_type; + dev_info->driver_id = dev->driver_id; dev_info->feature_flags = dev->feature_flags; dev_info->capabilities = aesni_mb_pmd_capabilities; dev_info->max_nb_queue_pairs = internals->max_nb_queue_pairs; diff --git a/drivers/crypto/armv8/rte_armv8_pmd.c b/drivers/crypto/armv8/rte_armv8_pmd.c index 4a23ff185f..7cce09f8de 100644 --- a/drivers/crypto/armv8/rte_armv8_pmd.c +++ b/drivers/crypto/armv8/rte_armv8_pmd.c @@ -45,6 +45,8 @@ #include "rte_armv8_pmd_private.h" +static uint8_t cryptodev_driver_id; + static int cryptodev_armv8_crypto_uninit(struct rte_vdev_device *vdev); /** @@ -554,8 +556,8 @@ get_session(struct armv8_crypto_qp *qp, struct rte_crypto_op *op) if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) { /* get existing session */ if (likely(op->sym->session != NULL && - op->sym->session->dev_type == - RTE_CRYPTODEV_ARMV8_PMD)) { + op->sym->session->driver_id == + cryptodev_driver_id)) { sess = (struct armv8_crypto_session *) op->sym->session->_private; } @@ -818,7 +820,7 @@ cryptodev_armv8_crypto_create(const char *name, goto init_error; } - dev->dev_type = RTE_CRYPTODEV_ARMV8_PMD; + dev->driver_id = cryptodev_driver_id; dev->dev_ops = rte_armv8_crypto_pmd_ops; /* register rx/tx burst functions for data path */ @@ -908,3 +910,4 @@ RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_ARMV8_PMD, "max_nb_queue_pairs= " "max_nb_sessions= " "socket_id="); +RTE_PMD_REGISTER_CRYPTO_DRIVER(armv8_crypto_drv, cryptodev_driver_id); diff --git a/drivers/crypto/armv8/rte_armv8_pmd_ops.c b/drivers/crypto/armv8/rte_armv8_pmd_ops.c index 78ed770004..1bce2ea2b7 100644 --- a/drivers/crypto/armv8/rte_armv8_pmd_ops.c +++ b/drivers/crypto/armv8/rte_armv8_pmd_ops.c @@ -180,7 +180,7 @@ armv8_crypto_pmd_info_get(struct rte_cryptodev *dev, struct armv8_crypto_private *internals = dev->data->dev_private; if (dev_info != NULL) { - dev_info->dev_type = dev->dev_type; + dev_info->driver_id = dev->driver_id; dev_info->feature_flags = dev->feature_flags; dev_info->capabilities = armv8_crypto_pmd_capabilities; dev_info->max_nb_queue_pairs = internals->max_nb_qpairs; diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c index a70812271e..6bfa812506 100644 --- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c +++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c @@ -76,6 +76,8 @@ enum rta_sec_era rta_sec_era = RTA_SEC_ERA_8; +static uint8_t cryptodev_driver_id; + static inline int build_authenc_gcm_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op, @@ -1689,7 +1691,7 @@ dpaa2_sec_dev_infos_get(struct rte_cryptodev *dev, info->feature_flags = dev->feature_flags; info->capabilities = dpaa2_sec_capabilities; info->sym.max_nb_sessions = internals->max_nb_sessions; - info->dev_type = RTE_CRYPTODEV_DPAA2_SEC_PMD; + info->driver_id = cryptodev_driver_id; } } @@ -1819,7 +1821,7 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev) } hw_id = dpaa2_dev->object_id; - cryptodev->dev_type = RTE_CRYPTODEV_DPAA2_SEC_PMD; + cryptodev->driver_id = cryptodev_driver_id; cryptodev->dev_ops = &crypto_ops; cryptodev->enqueue_burst = dpaa2_sec_enqueue_burst; @@ -1977,3 +1979,4 @@ static struct rte_dpaa2_driver rte_dpaa2_sec_driver = { }; RTE_PMD_REGISTER_DPAA2(CRYPTODEV_NAME_DPAA2_SEC_PMD, rte_dpaa2_sec_driver); +RTE_PMD_REGISTER_CRYPTO_DRIVER(rte_dpaa2_sec_driver, cryptodev_driver_id); diff --git a/drivers/crypto/kasumi/rte_kasumi_pmd.c b/drivers/crypto/kasumi/rte_kasumi_pmd.c index 615a8ca338..6c8da1777f 100644 --- a/drivers/crypto/kasumi/rte_kasumi_pmd.c +++ b/drivers/crypto/kasumi/rte_kasumi_pmd.c @@ -48,6 +48,8 @@ #define KASUMI_MAX_BURST 4 #define BYTE_LEN 8 +static uint8_t cryptodev_driver_id; + /** Get xform chain order. */ static enum kasumi_operation kasumi_get_mode(const struct rte_crypto_sym_xform *xform) @@ -164,8 +166,8 @@ kasumi_get_session(struct kasumi_qp *qp, struct rte_crypto_op *op) struct kasumi_session *sess; if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) { - if (unlikely(op->sym->session->dev_type != - RTE_CRYPTODEV_KASUMI_PMD)) + if (unlikely(op->sym->session->driver_id != + cryptodev_driver_id)) return NULL; sess = (struct kasumi_session *)op->sym->session->_private; @@ -580,7 +582,7 @@ cryptodev_kasumi_create(const char *name, goto init_error; } - dev->dev_type = RTE_CRYPTODEV_KASUMI_PMD; + dev->driver_id = cryptodev_driver_id; dev->dev_ops = rte_kasumi_pmd_ops; /* Register RX/TX burst functions for data path. */ @@ -664,3 +666,4 @@ RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_KASUMI_PMD, "max_nb_queue_pairs= " "max_nb_sessions= " "socket_id="); +RTE_PMD_REGISTER_CRYPTO_DRIVER(cryptodev_kasumi_pmd_drv, cryptodev_driver_id); diff --git a/drivers/crypto/kasumi/rte_kasumi_pmd_ops.c b/drivers/crypto/kasumi/rte_kasumi_pmd_ops.c index d4a02d8b9f..5cb00247f1 100644 --- a/drivers/crypto/kasumi/rte_kasumi_pmd_ops.c +++ b/drivers/crypto/kasumi/rte_kasumi_pmd_ops.c @@ -157,7 +157,7 @@ kasumi_pmd_info_get(struct rte_cryptodev *dev, struct kasumi_private *internals = dev->data->dev_private; if (dev_info != NULL) { - dev_info->dev_type = dev->dev_type; + dev_info->driver_id = dev->driver_id; dev_info->max_nb_queue_pairs = internals->max_nb_queue_pairs; dev_info->sym.max_nb_sessions = internals->max_nb_sessions; dev_info->feature_flags = dev->feature_flags; diff --git a/drivers/crypto/null/null_crypto_pmd.c b/drivers/crypto/null/null_crypto_pmd.c index 39dffea8eb..84280ae963 100644 --- a/drivers/crypto/null/null_crypto_pmd.c +++ b/drivers/crypto/null/null_crypto_pmd.c @@ -39,6 +39,8 @@ #include "null_crypto_pmd_private.h" +static uint8_t cryptodev_driver_id; + /** verify and set session parameters */ int null_crypto_set_session_parameters( @@ -97,7 +99,8 @@ get_session(struct null_crypto_qp *qp, struct rte_crypto_op *op) if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) { if (unlikely(sym_op->session == NULL || - sym_op->session->dev_type != RTE_CRYPTODEV_NULL_PMD)) + sym_op->session->driver_id != + cryptodev_driver_id)) return NULL; sess = (struct null_crypto_session *)sym_op->session->_private; @@ -187,7 +190,7 @@ cryptodev_null_create(const char *name, goto init_error; } - dev->dev_type = RTE_CRYPTODEV_NULL_PMD; + dev->driver_id = cryptodev_driver_id; dev->dev_ops = null_crypto_pmd_ops; /* register rx/tx burst functions for data path */ @@ -272,3 +275,4 @@ RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_NULL_PMD, "max_nb_queue_pairs= " "max_nb_sessions= " "socket_id="); +RTE_PMD_REGISTER_CRYPTO_DRIVER(cryptodev_null_pmd_drv, cryptodev_driver_id); diff --git a/drivers/crypto/null/null_crypto_pmd_ops.c b/drivers/crypto/null/null_crypto_pmd_ops.c index 3c943eea27..a3f2e4c949 100644 --- a/drivers/crypto/null/null_crypto_pmd_ops.c +++ b/drivers/crypto/null/null_crypto_pmd_ops.c @@ -148,7 +148,7 @@ null_crypto_pmd_info_get(struct rte_cryptodev *dev, struct null_crypto_private *internals = dev->data->dev_private; if (dev_info != NULL) { - dev_info->dev_type = dev->dev_type; + dev_info->driver_id = dev->driver_id; dev_info->max_nb_queue_pairs = internals->max_nb_qpairs; dev_info->sym.max_nb_sessions = internals->max_nb_sessions; dev_info->feature_flags = dev->feature_flags; diff --git a/drivers/crypto/openssl/rte_openssl_pmd.c b/drivers/crypto/openssl/rte_openssl_pmd.c index f86cc10a77..d497a27eae 100644 --- a/drivers/crypto/openssl/rte_openssl_pmd.c +++ b/drivers/crypto/openssl/rte_openssl_pmd.c @@ -45,6 +45,8 @@ #define DES_BLOCK_SIZE 8 +static uint8_t cryptodev_driver_id; + static int cryptodev_openssl_remove(struct rte_vdev_device *vdev); /*----------------------------------------------------------------------------*/ @@ -557,8 +559,8 @@ get_session(struct openssl_qp *qp, struct rte_crypto_op *op) if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) { /* get existing session */ if (likely(op->sym->session != NULL && - op->sym->session->dev_type == - RTE_CRYPTODEV_OPENSSL_PMD)) + op->sym->session->driver_id == + cryptodev_driver_id)) sess = (struct openssl_session *) op->sym->session->_private; } else { @@ -1404,7 +1406,7 @@ cryptodev_openssl_create(const char *name, goto init_error; } - dev->dev_type = RTE_CRYPTODEV_OPENSSL_PMD; + dev->driver_id = cryptodev_driver_id; dev->dev_ops = rte_openssl_pmd_ops; /* register rx/tx burst functions for data path */ @@ -1493,3 +1495,4 @@ RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_OPENSSL_PMD, "max_nb_queue_pairs= " "max_nb_sessions= " "socket_id="); +RTE_PMD_REGISTER_CRYPTO_DRIVER(cryptodev_openssl_pmd_drv, cryptodev_driver_id); diff --git a/drivers/crypto/openssl/rte_openssl_pmd_ops.c b/drivers/crypto/openssl/rte_openssl_pmd_ops.c index 3a58eeae59..6093b615ed 100644 --- a/drivers/crypto/openssl/rte_openssl_pmd_ops.c +++ b/drivers/crypto/openssl/rte_openssl_pmd_ops.c @@ -533,7 +533,7 @@ openssl_pmd_info_get(struct rte_cryptodev *dev, struct openssl_private *internals = dev->data->dev_private; if (dev_info != NULL) { - dev_info->dev_type = dev->dev_type; + dev_info->driver_id = dev->driver_id; dev_info->feature_flags = dev->feature_flags; dev_info->capabilities = openssl_pmd_capabilities; dev_info->max_nb_queue_pairs = internals->max_nb_qpairs; diff --git a/drivers/crypto/qat/qat_crypto.c b/drivers/crypto/qat/qat_crypto.c index e0750763ca..e2c8e430b8 100644 --- a/drivers/crypto/qat/qat_crypto.c +++ b/drivers/crypto/qat/qat_crypto.c @@ -1072,7 +1072,8 @@ qat_write_hw_desc_entry(struct rte_crypto_op *op, uint8_t *out_msg, return -EINVAL; } - if (unlikely(op->sym->session->dev_type != RTE_CRYPTODEV_QAT_SYM_PMD)) { + if (unlikely(op->sym->session->driver_id != + cryptodev_qat_driver_id)) { PMD_DRV_LOG(ERR, "Session was not created for this device"); return -EINVAL; } @@ -1433,7 +1434,7 @@ void qat_dev_info_get(struct rte_cryptodev *dev, info->feature_flags = dev->feature_flags; info->capabilities = internals->qat_dev_capabilities; info->sym.max_nb_sessions = internals->max_nb_sessions; - info->dev_type = RTE_CRYPTODEV_QAT_SYM_PMD; + info->driver_id = cryptodev_qat_driver_id; info->pci_dev = RTE_DEV_TO_PCI(dev->device); } } diff --git a/drivers/crypto/qat/qat_crypto.h b/drivers/crypto/qat/qat_crypto.h index f76f3ca7db..4151456439 100644 --- a/drivers/crypto/qat/qat_crypto.h +++ b/drivers/crypto/qat/qat_crypto.h @@ -85,6 +85,8 @@ struct qat_pmd_private { const struct rte_cryptodev_capabilities *qat_dev_capabilities; }; +extern uint8_t cryptodev_qat_driver_id; + int qat_dev_config(struct rte_cryptodev *dev, struct rte_cryptodev_config *config); int qat_dev_start(struct rte_cryptodev *dev); diff --git a/drivers/crypto/qat/rte_qat_cryptodev.c b/drivers/crypto/qat/rte_qat_cryptodev.c index 78d50fbc06..1c5ff77541 100644 --- a/drivers/crypto/qat/rte_qat_cryptodev.c +++ b/drivers/crypto/qat/rte_qat_cryptodev.c @@ -40,6 +40,8 @@ #include "qat_crypto.h" #include "qat_logs.h" +uint8_t cryptodev_qat_driver_id; + static const struct rte_cryptodev_capabilities qat_cpm16_capabilities[] = { QAT_BASE_CPM16_SYM_CAPABILITIES, RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() @@ -106,7 +108,7 @@ crypto_qat_dev_init(struct rte_cryptodev *cryptodev) RTE_DEV_TO_PCI(cryptodev->device)->addr.devid, RTE_DEV_TO_PCI(cryptodev->device)->addr.function); - cryptodev->dev_type = RTE_CRYPTODEV_QAT_SYM_PMD; + cryptodev->driver_id = cryptodev_qat_driver_id; cryptodev->dev_ops = &crypto_qat_ops; cryptodev->enqueue_burst = qat_pmd_enqueue_op_burst; @@ -168,4 +170,4 @@ static struct rte_pci_driver rte_qat_pmd = { RTE_PMD_REGISTER_PCI(CRYPTODEV_NAME_QAT_SYM_PMD, rte_qat_pmd); RTE_PMD_REGISTER_PCI_TABLE(CRYPTODEV_NAME_QAT_SYM_PMD, pci_id_qat_map); - +RTE_PMD_REGISTER_CRYPTO_DRIVER(rte_qat_pmd, cryptodev_qat_driver_id); diff --git a/drivers/crypto/scheduler/rte_cryptodev_scheduler.c b/drivers/crypto/scheduler/rte_cryptodev_scheduler.c index 95566d5b79..9c364c2fdd 100644 --- a/drivers/crypto/scheduler/rte_cryptodev_scheduler.c +++ b/drivers/crypto/scheduler/rte_cryptodev_scheduler.c @@ -198,7 +198,7 @@ rte_cryptodev_scheduler_slave_attach(uint8_t scheduler_id, uint8_t slave_id) return -ENOTSUP; } - if (dev->dev_type != RTE_CRYPTODEV_SCHEDULER_PMD) { + if (dev->driver_id != cryptodev_driver_id) { CS_LOG_ERR("Operation not supported"); return -ENOTSUP; } @@ -226,12 +226,12 @@ rte_cryptodev_scheduler_slave_attach(uint8_t scheduler_id, uint8_t slave_id) rte_cryptodev_info_get(slave_id, &dev_info); slave->dev_id = slave_id; - slave->dev_type = dev_info.dev_type; + slave->driver_id = dev_info.driver_id; sched_ctx->nb_slaves++; if (update_scheduler_capability(sched_ctx) < 0) { slave->dev_id = 0; - slave->dev_type = 0; + slave->driver_id = 0; sched_ctx->nb_slaves--; CS_LOG_ERR("capabilities update failed"); @@ -257,7 +257,7 @@ rte_cryptodev_scheduler_slave_detach(uint8_t scheduler_id, uint8_t slave_id) return -ENOTSUP; } - if (dev->dev_type != RTE_CRYPTODEV_SCHEDULER_PMD) { + if (dev->driver_id != cryptodev_driver_id) { CS_LOG_ERR("Operation not supported"); return -ENOTSUP; } @@ -314,7 +314,7 @@ rte_cryptodev_scheduler_mode_set(uint8_t scheduler_id, return -ENOTSUP; } - if (dev->dev_type != RTE_CRYPTODEV_SCHEDULER_PMD) { + if (dev->driver_id != cryptodev_driver_id) { CS_LOG_ERR("Operation not supported"); return -ENOTSUP; } @@ -370,7 +370,7 @@ rte_cryptodev_scheduler_mode_get(uint8_t scheduler_id) return -ENOTSUP; } - if (dev->dev_type != RTE_CRYPTODEV_SCHEDULER_PMD) { + if (dev->driver_id != cryptodev_driver_id) { CS_LOG_ERR("Operation not supported"); return -ENOTSUP; } @@ -392,7 +392,7 @@ rte_cryptodev_scheduler_ordering_set(uint8_t scheduler_id, return -ENOTSUP; } - if (dev->dev_type != RTE_CRYPTODEV_SCHEDULER_PMD) { + if (dev->driver_id != cryptodev_driver_id) { CS_LOG_ERR("Operation not supported"); return -ENOTSUP; } @@ -420,7 +420,7 @@ rte_cryptodev_scheduler_ordering_get(uint8_t scheduler_id) return -ENOTSUP; } - if (dev->dev_type != RTE_CRYPTODEV_SCHEDULER_PMD) { + if (dev->driver_id != cryptodev_driver_id) { CS_LOG_ERR("Operation not supported"); return -ENOTSUP; } @@ -442,7 +442,7 @@ rte_cryptodev_scheduler_load_user_scheduler(uint8_t scheduler_id, return -ENOTSUP; } - if (dev->dev_type != RTE_CRYPTODEV_SCHEDULER_PMD) { + if (dev->driver_id != cryptodev_driver_id) { CS_LOG_ERR("Operation not supported"); return -ENOTSUP; } @@ -499,7 +499,7 @@ rte_cryptodev_scheduler_slaves_get(uint8_t scheduler_id, uint8_t *slaves) return -ENOTSUP; } - if (dev->dev_type != RTE_CRYPTODEV_SCHEDULER_PMD) { + if (dev->driver_id != cryptodev_driver_id) { CS_LOG_ERR("Operation not supported"); return -ENOTSUP; } @@ -567,7 +567,7 @@ rte_cryptodev_scheduler_option_get(uint8_t scheduler_id, return -EINVAL; } - if (dev->dev_type != RTE_CRYPTODEV_SCHEDULER_PMD) { + if (dev->driver_id != cryptodev_driver_id) { CS_LOG_ERR("Operation not supported"); return -ENOTSUP; } diff --git a/drivers/crypto/scheduler/scheduler_pmd.c b/drivers/crypto/scheduler/scheduler_pmd.c index fefd6cc47d..b385851651 100644 --- a/drivers/crypto/scheduler/scheduler_pmd.c +++ b/drivers/crypto/scheduler/scheduler_pmd.c @@ -42,6 +42,8 @@ #include "rte_cryptodev_scheduler.h" #include "scheduler_pmd_private.h" +uint8_t cryptodev_driver_id; + struct scheduler_init_params { struct rte_crypto_vdev_init_params def_p; uint32_t nb_slaves; @@ -113,7 +115,7 @@ cryptodev_scheduler_create(const char *name, return -EFAULT; } - dev->dev_type = RTE_CRYPTODEV_SCHEDULER_PMD; + dev->driver_id = cryptodev_driver_id; dev->dev_ops = rte_crypto_scheduler_pmd_ops; sched_ctx = dev->data->dev_private; @@ -436,3 +438,5 @@ RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_SCHEDULER_PMD, "max_nb_sessions= " "socket_id= " "slave="); +RTE_PMD_REGISTER_CRYPTO_DRIVER(cryptodev_scheduler_pmd_drv, + cryptodev_driver_id); diff --git a/drivers/crypto/scheduler/scheduler_pmd_ops.c b/drivers/crypto/scheduler/scheduler_pmd_ops.c index 4fc8b91646..90e3734029 100644 --- a/drivers/crypto/scheduler/scheduler_pmd_ops.c +++ b/drivers/crypto/scheduler/scheduler_pmd_ops.c @@ -369,7 +369,7 @@ scheduler_pmd_info_get(struct rte_cryptodev *dev, max_nb_sessions; } - dev_info->dev_type = dev->dev_type; + dev_info->driver_id = dev->driver_id; dev_info->feature_flags = dev->feature_flags; dev_info->capabilities = sched_ctx->capabilities; dev_info->max_nb_queue_pairs = sched_ctx->max_nb_queue_pairs; diff --git a/drivers/crypto/scheduler/scheduler_pmd_private.h b/drivers/crypto/scheduler/scheduler_pmd_private.h index 05a5916c37..efb2bbcc7c 100644 --- a/drivers/crypto/scheduler/scheduler_pmd_private.h +++ b/drivers/crypto/scheduler/scheduler_pmd_private.h @@ -63,7 +63,7 @@ struct scheduler_slave { uint16_t qp_id; uint32_t nb_inflight_cops; - enum rte_cryptodev_type dev_type; + uint8_t driver_id; }; struct scheduler_ctx { @@ -105,6 +105,8 @@ struct scheduler_session { RTE_CRYPTODEV_SCHEDULER_MAX_NB_SLAVES]; }; +extern uint8_t cryptodev_driver_id; + static __rte_always_inline uint16_t get_max_enqueue_order_count(struct rte_ring *order_ring, uint16_t nb_ops) { diff --git a/drivers/crypto/snow3g/rte_snow3g_pmd.c b/drivers/crypto/snow3g/rte_snow3g_pmd.c index 8ada08f795..18b6f86167 100644 --- a/drivers/crypto/snow3g/rte_snow3g_pmd.c +++ b/drivers/crypto/snow3g/rte_snow3g_pmd.c @@ -47,6 +47,8 @@ #define SNOW3G_MAX_BURST 8 #define BYTE_LEN 8 +static uint8_t cryptodev_driver_id; + /** Get xform chain order. */ static enum snow3g_operation snow3g_get_mode(const struct rte_crypto_sym_xform *xform) @@ -164,8 +166,8 @@ snow3g_get_session(struct snow3g_qp *qp, struct rte_crypto_op *op) struct snow3g_session *sess; if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) { - if (unlikely(op->sym->session->dev_type != - RTE_CRYPTODEV_SNOW3G_PMD)) + if (unlikely(op->sym->session->driver_id != + cryptodev_driver_id)) return NULL; sess = (struct snow3g_session *)op->sym->session->_private; @@ -562,7 +564,7 @@ cryptodev_snow3g_create(const char *name, goto init_error; } - dev->dev_type = RTE_CRYPTODEV_SNOW3G_PMD; + dev->driver_id = cryptodev_driver_id; dev->dev_ops = rte_snow3g_pmd_ops; /* Register RX/TX burst functions for data path. */ @@ -646,3 +648,4 @@ RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_SNOW3G_PMD, "max_nb_queue_pairs= " "max_nb_sessions= " "socket_id="); +RTE_PMD_REGISTER_CRYPTO_DRIVER(cryptodev_snow3g_pmd_drv, cryptodev_driver_id); diff --git a/drivers/crypto/snow3g/rte_snow3g_pmd_ops.c b/drivers/crypto/snow3g/rte_snow3g_pmd_ops.c index 3f02683f12..e3fa0fa764 100644 --- a/drivers/crypto/snow3g/rte_snow3g_pmd_ops.c +++ b/drivers/crypto/snow3g/rte_snow3g_pmd_ops.c @@ -157,7 +157,7 @@ snow3g_pmd_info_get(struct rte_cryptodev *dev, struct snow3g_private *internals = dev->data->dev_private; if (dev_info != NULL) { - dev_info->dev_type = dev->dev_type; + dev_info->driver_id = dev->driver_id; dev_info->max_nb_queue_pairs = internals->max_nb_queue_pairs; dev_info->sym.max_nb_sessions = internals->max_nb_sessions; dev_info->feature_flags = dev->feature_flags; diff --git a/drivers/crypto/zuc/rte_zuc_pmd.c b/drivers/crypto/zuc/rte_zuc_pmd.c index 2e8eaeb0e3..7d2e37ca4c 100644 --- a/drivers/crypto/zuc/rte_zuc_pmd.c +++ b/drivers/crypto/zuc/rte_zuc_pmd.c @@ -46,6 +46,8 @@ #define ZUC_MAX_BURST 8 #define BYTE_LEN 8 +static uint8_t cryptodev_driver_id; + /** Get xform chain order. */ static enum zuc_operation zuc_get_mode(const struct rte_crypto_sym_xform *xform) @@ -163,8 +165,8 @@ zuc_get_session(struct zuc_qp *qp, struct rte_crypto_op *op) struct zuc_session *sess; if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) { - if (unlikely(op->sym->session->dev_type != - RTE_CRYPTODEV_ZUC_PMD)) + if (unlikely(op->sym->session->driver_id != + cryptodev_driver_id)) return NULL; sess = (struct zuc_session *)op->sym->session->_private; @@ -468,7 +470,7 @@ cryptodev_zuc_create(const char *name, goto init_error; } - dev->dev_type = RTE_CRYPTODEV_ZUC_PMD; + dev->driver_id = cryptodev_driver_id; dev->dev_ops = rte_zuc_pmd_ops; /* Register RX/TX burst functions for data path. */ @@ -551,3 +553,4 @@ RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_ZUC_PMD, "max_nb_queue_pairs= " "max_nb_sessions= " "socket_id="); +RTE_PMD_REGISTER_CRYPTO_DRIVER(cryptodev_zuc_pmd_drv, cryptodev_driver_id); diff --git a/drivers/crypto/zuc/rte_zuc_pmd_ops.c b/drivers/crypto/zuc/rte_zuc_pmd_ops.c index 4775787a43..abfa0e26d9 100644 --- a/drivers/crypto/zuc/rte_zuc_pmd_ops.c +++ b/drivers/crypto/zuc/rte_zuc_pmd_ops.c @@ -157,7 +157,7 @@ zuc_pmd_info_get(struct rte_cryptodev *dev, struct zuc_private *internals = dev->data->dev_private; if (dev_info != NULL) { - dev_info->dev_type = dev->dev_type; + dev_info->driver_id = dev->driver_id; dev_info->max_nb_queue_pairs = internals->max_nb_queue_pairs; dev_info->sym.max_nb_sessions = internals->max_nb_sessions; dev_info->feature_flags = dev->feature_flags; diff --git a/lib/librte_cryptodev/rte_cryptodev.c b/lib/librte_cryptodev/rte_cryptodev.c index 497f9ceb1f..107632b088 100644 --- a/lib/librte_cryptodev/rte_cryptodev.c +++ b/lib/librte_cryptodev/rte_cryptodev.c @@ -452,12 +452,12 @@ rte_cryptodev_count(void) } uint8_t -rte_cryptodev_count_devtype(enum rte_cryptodev_type type) +rte_cryptodev_device_count_by_driver(uint8_t driver_id) { uint8_t i, dev_count = 0; for (i = 0; i < rte_cryptodev_globals->max_devs; i++) - if (rte_cryptodev_globals->devs[i].dev_type == type && + if (rte_cryptodev_globals->devs[i].driver_id == driver_id && rte_cryptodev_globals->devs[i].attached == RTE_CRYPTODEV_ATTACHED) dev_count++; @@ -1101,7 +1101,7 @@ rte_cryptodev_sym_session_init(struct rte_mempool *mp, memset(sess, 0, mp->elt_size); sess->dev_id = dev->data->dev_id; - sess->dev_type = dev->dev_type; + sess->driver_id = dev->driver_id; sess->mp = mp; if (dev->dev_ops->session_initialize) @@ -1268,7 +1268,7 @@ rte_cryptodev_sym_session_free(uint8_t dev_id, dev = &rte_crypto_devices[dev_id]; /* Check the session belongs to this device type */ - if (sess->dev_type != dev->dev_type) + if (sess->driver_id != dev->driver_id) return sess; /* Let device implementation clear session material */ @@ -1380,3 +1380,60 @@ rte_cryptodev_pmd_create_dev_name(char *name, const char *dev_name_prefix) return -1; } + +TAILQ_HEAD(cryptodev_driver_list, cryptodev_driver); + +static struct cryptodev_driver_list cryptodev_driver_list = + TAILQ_HEAD_INITIALIZER(cryptodev_driver_list); + +struct cryptodev_driver { + TAILQ_ENTRY(cryptodev_driver) next; /**< Next in list. */ + const struct rte_driver *driver; + uint8_t id; +}; + +static uint8_t nb_drivers; + +int +rte_cryptodev_driver_id_get(const char *name) +{ + struct cryptodev_driver *driver; + const char *driver_name; + + if (name == NULL) { + RTE_LOG(DEBUG, CRYPTODEV, "name pointer NULL"); + return -1; + } + + TAILQ_FOREACH(driver, &cryptodev_driver_list, next) { + driver_name = driver->driver->name; + if (strncmp(driver_name, name, strlen(driver_name)) == 0) + return driver->id; + } + return -1; +} + +const char * +rte_cryptodev_driver_name_get(uint8_t driver_id) +{ + struct cryptodev_driver *driver; + + TAILQ_FOREACH(driver, &cryptodev_driver_list, next) + if (driver->id == driver_id) + return driver->driver->name; + return NULL; +} + +uint8_t +rte_cryptodev_allocate_driver(const struct rte_driver *drv) +{ + struct cryptodev_driver *driver; + + driver = malloc(sizeof(*driver)); + driver->driver = drv; + driver->id = nb_drivers; + + TAILQ_INSERT_TAIL(&cryptodev_driver_list, driver, next); + + return nb_drivers++; +} diff --git a/lib/librte_cryptodev/rte_cryptodev.h b/lib/librte_cryptodev/rte_cryptodev.h index bd422fdcde..9c2a37353e 100644 --- a/lib/librte_cryptodev/rte_cryptodev.h +++ b/lib/librte_cryptodev/rte_cryptodev.h @@ -74,21 +74,6 @@ extern "C" { #define CRYPTODEV_NAME_DPAA2_SEC_PMD crypto_dpaa2_sec /**< NXP DPAA2 - SEC PMD device name */ -/** Crypto device type */ -enum rte_cryptodev_type { - RTE_CRYPTODEV_NULL_PMD = 1, /**< Null crypto PMD */ - RTE_CRYPTODEV_AESNI_GCM_PMD, /**< AES-NI GCM PMD */ - RTE_CRYPTODEV_AESNI_MB_PMD, /**< AES-NI multi buffer PMD */ - RTE_CRYPTODEV_QAT_SYM_PMD, /**< QAT PMD Symmetric Crypto */ - RTE_CRYPTODEV_SNOW3G_PMD, /**< SNOW 3G PMD */ - RTE_CRYPTODEV_KASUMI_PMD, /**< KASUMI PMD */ - RTE_CRYPTODEV_ZUC_PMD, /**< ZUC PMD */ - RTE_CRYPTODEV_OPENSSL_PMD, /**< OpenSSL PMD */ - RTE_CRYPTODEV_ARMV8_PMD, /**< ARMv8 crypto PMD */ - RTE_CRYPTODEV_SCHEDULER_PMD, /**< Crypto Scheduler PMD */ - RTE_CRYPTODEV_DPAA2_SEC_PMD, /**< NXP DPAA2 - SEC PMD */ -}; - extern const char **rte_cyptodev_names; /* Logging Macros */ @@ -408,7 +393,7 @@ rte_cryptodev_get_feature_name(uint64_t flag); /** Crypto device information */ struct rte_cryptodev_info { const char *driver_name; /**< Driver name. */ - enum rte_cryptodev_type dev_type; /**< Device type */ + uint8_t driver_id; /**< Driver identifier */ struct rte_pci_device *pci_dev; /**< PCI information. */ uint64_t feature_flags; /**< Feature flags */ @@ -512,13 +497,13 @@ rte_cryptodev_count(void); /** * Get number of crypto device defined type. * - * @param type type of device. + * @param driver_id driver identifier. * * @return * Returns number of crypto device. */ extern uint8_t -rte_cryptodev_count_devtype(enum rte_cryptodev_type type); +rte_cryptodev_device_count_by_driver(uint8_t driver_id); /** * Get number and identifiers of attached crypto devices that @@ -789,8 +774,8 @@ struct rte_cryptodev { struct rte_device *device; /**< Backing device */ - enum rte_cryptodev_type dev_type; - /**< Crypto device type */ + uint8_t driver_id; + /**< Crypto driver identifier*/ struct rte_cryptodev_cb_list link_intr_cbs; /**< User application callback for interrupts if present */ @@ -927,8 +912,8 @@ struct rte_cryptodev_sym_session { struct { uint8_t dev_id; /**< Device Id */ - enum rte_cryptodev_type dev_type; - /** Crypto Device type session created on */ + uint8_t driver_id; + /** Crypto driver identifier session created on */ struct rte_mempool *mp; /**< Mempool session allocated from */ } __rte_aligned(8); @@ -1009,6 +994,45 @@ int rte_cryptodev_queue_pair_detach_sym_session(uint16_t qp_id, struct rte_cryptodev_sym_session *session); +/** + * Provide driver identifier. + * + * @param name + * The pointer to a driver name. + * @return + * The driver type identifier or -1 if no driver found + */ +int rte_cryptodev_driver_id_get(const char *name); + +/** + * Provide driver name. + * + * @param driver_id + * The driver identifier. + * @return + * The driver name or null if no driver found + */ +const char *rte_cryptodev_driver_name_get(uint8_t driver_id); + +/** + * @internal + * Allocate Cryptodev driver. + * + * @param driver + * Pointer to rte_driver. + * @return + * The driver type identifier + */ +uint8_t rte_cryptodev_allocate_driver(const struct rte_driver *driver); + + +#define RTE_PMD_REGISTER_CRYPTO_DRIVER(drv, driver_id)\ +RTE_INIT(init_ ##driver_id);\ +static void init_ ##driver_id(void)\ +{\ + driver_id = rte_cryptodev_allocate_driver(&(drv).driver);\ +} + #ifdef __cplusplus } diff --git a/lib/librte_cryptodev/rte_cryptodev_pmd.h b/lib/librte_cryptodev/rte_cryptodev_pmd.h index 8e8b2ad22c..f6aa84dd5e 100644 --- a/lib/librte_cryptodev/rte_cryptodev_pmd.h +++ b/lib/librte_cryptodev/rte_cryptodev_pmd.h @@ -60,7 +60,7 @@ struct rte_cryptodev_session { RTE_STD_C11 struct { uint8_t dev_id; - enum rte_cryptodev_type type; + uint8_t driver_id; struct rte_mempool *mp; } __rte_aligned(8); diff --git a/lib/librte_cryptodev/rte_cryptodev_version.map b/lib/librte_cryptodev/rte_cryptodev_version.map index ea0b561c52..3ad7581b63 100644 --- a/lib/librte_cryptodev/rte_cryptodev_version.map +++ b/lib/librte_cryptodev/rte_cryptodev_version.map @@ -6,7 +6,6 @@ DPDK_16.04 { rte_cryptodev_callback_unregister; rte_cryptodev_close; rte_cryptodev_count; - rte_cryptodev_count_devtype; rte_cryptodev_configure; rte_cryptodev_create_vdev; rte_cryptodev_get_dev_id; @@ -62,6 +61,10 @@ DPDK_17.05 { DPDK_17.08 { global: + rte_cryptodev_allocate_driver; + rte_cryptodev_device_count_by_driver; + rte_cryptodev_driver_id_get; + rte_cryptodev_driver_name_get; rte_cryptodev_get_aead_algo_enum; rte_cryptodev_pci_generic_probe; rte_cryptodev_pci_generic_remove; diff --git a/test/test/test_cryptodev.c b/test/test/test_cryptodev.c index 2a060c8cea..2a71f7217b 100644 --- a/test/test/test_cryptodev.c +++ b/test/test/test_cryptodev.c @@ -61,7 +61,7 @@ #include "test_cryptodev_gcm_test_vectors.h" #include "test_cryptodev_hmac_test_vectors.h" -static enum rte_cryptodev_type gbl_cryptodev_type; +static int gbl_driver_id; struct crypto_testsuite_params { struct rte_mempool *mbuf_pool; @@ -213,14 +213,11 @@ testsuite_setup(void) } /* Create an AESNI MB device if required */ - if (gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_MB_PMD) { -#ifndef RTE_LIBRTE_PMD_AESNI_MB - RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_MB must be" - " enabled in config file to run this testsuite.\n"); - return TEST_FAILED; -#endif - nb_devs = rte_cryptodev_count_devtype( - RTE_CRYPTODEV_AESNI_MB_PMD); + if (gbl_driver_id == rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD))) { + nb_devs = rte_cryptodev_device_count_by_driver( + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD))); if (nb_devs < 1) { ret = rte_vdev_init( RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD), NULL); @@ -233,14 +230,11 @@ testsuite_setup(void) } /* Create an AESNI GCM device if required */ - if (gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_GCM_PMD) { -#ifndef RTE_LIBRTE_PMD_AESNI_GCM - RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_GCM must be" - " enabled in config file to run this testsuite.\n"); - return TEST_FAILED; -#endif - nb_devs = rte_cryptodev_count_devtype( - RTE_CRYPTODEV_AESNI_GCM_PMD); + if (gbl_driver_id == rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_GCM_PMD))) { + nb_devs = rte_cryptodev_device_count_by_driver( + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_GCM_PMD))); if (nb_devs < 1) { TEST_ASSERT_SUCCESS(rte_vdev_init( RTE_STR(CRYPTODEV_NAME_AESNI_GCM_PMD), NULL), @@ -251,13 +245,11 @@ testsuite_setup(void) } /* Create a SNOW 3G device if required */ - if (gbl_cryptodev_type == RTE_CRYPTODEV_SNOW3G_PMD) { -#ifndef RTE_LIBRTE_PMD_SNOW3G - RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_SNOW3G must be" - " enabled in config file to run this testsuite.\n"); - return TEST_FAILED; -#endif - nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_SNOW3G_PMD); + if (gbl_driver_id == rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_SNOW3G_PMD))) { + nb_devs = rte_cryptodev_device_count_by_driver( + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_SNOW3G_PMD))); if (nb_devs < 1) { TEST_ASSERT_SUCCESS(rte_vdev_init( RTE_STR(CRYPTODEV_NAME_SNOW3G_PMD), NULL), @@ -268,13 +260,11 @@ testsuite_setup(void) } /* Create a KASUMI device if required */ - if (gbl_cryptodev_type == RTE_CRYPTODEV_KASUMI_PMD) { -#ifndef RTE_LIBRTE_PMD_KASUMI - RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_KASUMI must be" - " enabled in config file to run this testsuite.\n"); - return TEST_FAILED; -#endif - nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_KASUMI_PMD); + if (gbl_driver_id == rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_KASUMI_PMD))) { + nb_devs = rte_cryptodev_device_count_by_driver( + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_KASUMI_PMD))); if (nb_devs < 1) { TEST_ASSERT_SUCCESS(rte_vdev_init( RTE_STR(CRYPTODEV_NAME_KASUMI_PMD), NULL), @@ -285,13 +275,11 @@ testsuite_setup(void) } /* Create a ZUC device if required */ - if (gbl_cryptodev_type == RTE_CRYPTODEV_ZUC_PMD) { -#ifndef RTE_LIBRTE_PMD_ZUC - RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_ZUC must be" - " enabled in config file to run this testsuite.\n"); - return TEST_FAILED; -#endif - nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_ZUC_PMD); + if (gbl_driver_id == rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_ZUC_PMD))) { + nb_devs = rte_cryptodev_device_count_by_driver( + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_ZUC_PMD))); if (nb_devs < 1) { TEST_ASSERT_SUCCESS(rte_vdev_init( RTE_STR(CRYPTODEV_NAME_ZUC_PMD), NULL), @@ -302,14 +290,11 @@ testsuite_setup(void) } /* Create a NULL device if required */ - if (gbl_cryptodev_type == RTE_CRYPTODEV_NULL_PMD) { -#ifndef RTE_LIBRTE_PMD_NULL_CRYPTO - RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO must be" - " enabled in config file to run this testsuite.\n"); - return TEST_FAILED; -#endif - nb_devs = rte_cryptodev_count_devtype( - RTE_CRYPTODEV_NULL_PMD); + if (gbl_driver_id == rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_NULL_PMD))) { + nb_devs = rte_cryptodev_device_count_by_driver( + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_NULL_PMD))); if (nb_devs < 1) { ret = rte_vdev_init( RTE_STR(CRYPTODEV_NAME_NULL_PMD), NULL); @@ -322,14 +307,11 @@ testsuite_setup(void) } /* Create an OPENSSL device if required */ - if (gbl_cryptodev_type == RTE_CRYPTODEV_OPENSSL_PMD) { -#ifndef RTE_LIBRTE_PMD_OPENSSL - RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_OPENSSL must be" - " enabled in config file to run this testsuite.\n"); - return TEST_FAILED; -#endif - nb_devs = rte_cryptodev_count_devtype( - RTE_CRYPTODEV_OPENSSL_PMD); + if (gbl_driver_id == rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD))) { + nb_devs = rte_cryptodev_device_count_by_driver( + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD))); if (nb_devs < 1) { ret = rte_vdev_init( RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD), @@ -342,14 +324,11 @@ testsuite_setup(void) } /* Create a ARMv8 device if required */ - if (gbl_cryptodev_type == RTE_CRYPTODEV_ARMV8_PMD) { -#ifndef RTE_LIBRTE_PMD_ARMV8_CRYPTO - RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO must be" - " enabled in config file to run this testsuite.\n"); - return TEST_FAILED; -#endif - nb_devs = rte_cryptodev_count_devtype( - RTE_CRYPTODEV_ARMV8_PMD); + if (gbl_driver_id == rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_ARMV8_PMD))) { + nb_devs = rte_cryptodev_device_count_by_driver( + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_ARMV8_PMD))); if (nb_devs < 1) { ret = rte_vdev_init( RTE_STR(CRYPTODEV_NAME_ARMV8_PMD), @@ -362,15 +341,12 @@ testsuite_setup(void) } #ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER - if (gbl_cryptodev_type == RTE_CRYPTODEV_SCHEDULER_PMD) { + if (gbl_driver_id == rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD))) { -#ifndef RTE_LIBRTE_PMD_AESNI_MB - RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_MB must be" - " enabled in config file to run this testsuite.\n"); - return TEST_FAILED; -#endif - nb_devs = rte_cryptodev_count_devtype( - RTE_CRYPTODEV_SCHEDULER_PMD); + nb_devs = rte_cryptodev_device_count_by_driver( + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD))); if (nb_devs < 1) { ret = rte_vdev_init( RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD), @@ -384,14 +360,6 @@ testsuite_setup(void) } #endif /* RTE_LIBRTE_PMD_CRYPTO_SCHEDULER */ -#ifndef RTE_LIBRTE_PMD_QAT - if (gbl_cryptodev_type == RTE_CRYPTODEV_QAT_SYM_PMD) { - RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_QAT must be enabled " - "in config file to run this testsuite.\n"); - return TEST_FAILED; - } -#endif - nb_devs = rte_cryptodev_count(); if (nb_devs < 1) { RTE_LOG(ERR, USER1, "No crypto devices found?\n"); @@ -401,7 +369,7 @@ testsuite_setup(void) /* Create list of valid crypto devs */ for (i = 0; i < nb_devs; i++) { rte_cryptodev_info_get(i, &info); - if (info.dev_type == gbl_cryptodev_type) + if (info.driver_id == gbl_driver_id) ts_params->valid_devs[ts_params->valid_dev_count++] = i; } @@ -1341,7 +1309,8 @@ test_AES_CBC_HMAC_SHA1_encrypt_digest(void) TEST_ASSERT_BUFFERS_ARE_EQUAL(digest, catch_22_quote_2_512_bytes_AES_CBC_HMAC_SHA1_digest, - gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_MB_PMD ? + gbl_driver_id == rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)) ? TRUNCATED_DIGEST_BYTE_LENGTH_SHA1 : DIGEST_BYTE_LENGTH_SHA1, "Generated digest data not as expected"); @@ -1502,7 +1471,8 @@ test_AES_cipheronly_mb_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_AESNI_MB_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)), BLKCIPHER_AES_CIPHERONLY_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1518,7 +1488,8 @@ test_AES_docsis_mb_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_AESNI_MB_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)), BLKCIPHER_AES_DOCSIS_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1534,7 +1505,8 @@ test_AES_docsis_qat_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_QAT_SYM_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD)), BLKCIPHER_AES_DOCSIS_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1550,7 +1522,8 @@ test_DES_docsis_qat_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_QAT_SYM_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD)), BLKCIPHER_DES_DOCSIS_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1566,7 +1539,8 @@ test_authonly_mb_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_AESNI_MB_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)), BLKCIPHER_AUTHONLY_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1582,7 +1556,8 @@ test_AES_chain_mb_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_AESNI_MB_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)), BLKCIPHER_AES_CHAIN_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1600,7 +1575,8 @@ test_AES_cipheronly_scheduler_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_SCHEDULER_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD)), BLKCIPHER_AES_CIPHERONLY_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1616,7 +1592,8 @@ test_AES_chain_scheduler_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_SCHEDULER_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD)), BLKCIPHER_AES_CHAIN_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1632,7 +1609,8 @@ test_authonly_scheduler_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_SCHEDULER_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD)), BLKCIPHER_AUTHONLY_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1650,7 +1628,8 @@ test_AES_chain_openssl_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_OPENSSL_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD)), BLKCIPHER_AES_CHAIN_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1666,7 +1645,8 @@ test_AES_cipheronly_openssl_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_OPENSSL_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD)), BLKCIPHER_AES_CIPHERONLY_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1682,7 +1662,8 @@ test_AES_chain_qat_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_QAT_SYM_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD)), BLKCIPHER_AES_CHAIN_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1698,7 +1679,8 @@ test_AES_cipheronly_qat_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_QAT_SYM_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD)), BLKCIPHER_AES_CIPHERONLY_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1714,7 +1696,8 @@ test_AES_chain_dpaa2_sec_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_DPAA2_SEC_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_DPAA2_SEC_PMD)), BLKCIPHER_AES_CHAIN_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1730,7 +1713,8 @@ test_AES_cipheronly_dpaa2_sec_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_DPAA2_SEC_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_DPAA2_SEC_PMD)), BLKCIPHER_AES_CIPHERONLY_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1746,7 +1730,8 @@ test_authonly_dpaa2_sec_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_DPAA2_SEC_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(RTE_CRYPTODEV_DPAA2_SEC_PMD)), BLKCIPHER_AUTHONLY_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1762,7 +1747,8 @@ test_authonly_openssl_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_OPENSSL_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD)), BLKCIPHER_AUTHONLY_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -1778,7 +1764,8 @@ test_AES_chain_armv8_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_ARMV8_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_ARMV8_PMD)), BLKCIPHER_AES_CHAIN_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -4524,7 +4511,8 @@ test_3DES_chain_qat_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_QAT_SYM_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD)), BLKCIPHER_3DES_CHAIN_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -4540,7 +4528,8 @@ test_DES_cipheronly_qat_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_QAT_SYM_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD)), BLKCIPHER_DES_CIPHERONLY_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -4556,7 +4545,8 @@ test_DES_docsis_openssl_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_OPENSSL_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD)), BLKCIPHER_DES_DOCSIS_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -4572,7 +4562,8 @@ test_3DES_chain_dpaa2_sec_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_DPAA2_SEC_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_DPAA2_SEC_PMD)), BLKCIPHER_3DES_CHAIN_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -4588,7 +4579,8 @@ test_3DES_cipheronly_dpaa2_sec_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_DPAA2_SEC_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_DPAA2_SEC_PMD)), BLKCIPHER_3DES_CIPHERONLY_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -4604,7 +4596,8 @@ test_3DES_cipheronly_qat_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_QAT_SYM_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD)), BLKCIPHER_3DES_CIPHERONLY_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -4620,7 +4613,8 @@ test_3DES_chain_openssl_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_OPENSSL_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD)), BLKCIPHER_3DES_CHAIN_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -4636,7 +4630,8 @@ test_3DES_cipheronly_openssl_all(void) status = test_blockcipher_all_tests(ts_params->mbuf_pool, ts_params->op_mpool, ts_params->valid_devs[0], - RTE_CRYPTODEV_OPENSSL_PMD, + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD)), BLKCIPHER_3DES_CIPHERONLY_TYPE); TEST_ASSERT_EQUAL(status, 0, "Test failed"); @@ -7661,8 +7656,9 @@ test_scheduler_attach_slave_op(void) char vdev_name[32]; /* create 2 AESNI_MB if necessary */ - nb_devs = rte_cryptodev_count_devtype( - RTE_CRYPTODEV_AESNI_MB_PMD); + nb_devs = rte_cryptodev_device_count_by_driver( + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD))); if (nb_devs < 2) { for (i = nb_devs; i < 2; i++) { snprintf(vdev_name, sizeof(vdev_name), "%s_%u", @@ -7683,7 +7679,8 @@ test_scheduler_attach_slave_op(void) struct rte_cryptodev_info info; rte_cryptodev_info_get(i, &info); - if (info.dev_type != RTE_CRYPTODEV_AESNI_MB_PMD) + if (info.driver_id != rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD))) continue; ret = rte_cryptodev_scheduler_slave_attach(sched_id, @@ -8683,14 +8680,31 @@ static struct unit_test_suite cryptodev_armv8_testsuite = { static int test_cryptodev_qat(void /*argv __rte_unused, int argc __rte_unused*/) { - gbl_cryptodev_type = RTE_CRYPTODEV_QAT_SYM_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "QAT PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_QAT is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } + return unit_test_suite_runner(&cryptodev_qat_testsuite); } static int test_cryptodev_aesni_mb(void /*argv __rte_unused, int argc __rte_unused*/) { - gbl_cryptodev_type = RTE_CRYPTODEV_AESNI_MB_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "AESNI MB PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_AESNI_MB is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_aesni_mb_testsuite); } @@ -8698,7 +8712,15 @@ test_cryptodev_aesni_mb(void /*argv __rte_unused, int argc __rte_unused*/) static int test_cryptodev_openssl(void) { - gbl_cryptodev_type = RTE_CRYPTODEV_OPENSSL_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "AESNI MB PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_AESNI_MB is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_openssl_testsuite); } @@ -8706,7 +8728,15 @@ test_cryptodev_openssl(void) static int test_cryptodev_aesni_gcm(void) { - gbl_cryptodev_type = RTE_CRYPTODEV_AESNI_GCM_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_GCM_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "AESNI GCM PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_AESNI_GCM is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_aesni_gcm_testsuite); } @@ -8714,7 +8744,15 @@ test_cryptodev_aesni_gcm(void) static int test_cryptodev_null(void) { - gbl_cryptodev_type = RTE_CRYPTODEV_NULL_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_NULL_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "NULL PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_NULL is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_null_testsuite); } @@ -8722,7 +8760,15 @@ test_cryptodev_null(void) static int test_cryptodev_sw_snow3g(void /*argv __rte_unused, int argc __rte_unused*/) { - gbl_cryptodev_type = RTE_CRYPTODEV_SNOW3G_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_SNOW3G_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "SNOW3G PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_SNOW3G is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_sw_snow3g_testsuite); } @@ -8730,7 +8776,15 @@ test_cryptodev_sw_snow3g(void /*argv __rte_unused, int argc __rte_unused*/) static int test_cryptodev_sw_kasumi(void /*argv __rte_unused, int argc __rte_unused*/) { - gbl_cryptodev_type = RTE_CRYPTODEV_KASUMI_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_KASUMI_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "ZUC PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_KASUMI is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_sw_kasumi_testsuite); } @@ -8738,7 +8792,15 @@ test_cryptodev_sw_kasumi(void /*argv __rte_unused, int argc __rte_unused*/) static int test_cryptodev_sw_zuc(void /*argv __rte_unused, int argc __rte_unused*/) { - gbl_cryptodev_type = RTE_CRYPTODEV_ZUC_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_ZUC_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "ZUC PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_ZUC is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_sw_zuc_testsuite); } @@ -8746,7 +8808,15 @@ test_cryptodev_sw_zuc(void /*argv __rte_unused, int argc __rte_unused*/) static int test_cryptodev_armv8(void) { - gbl_cryptodev_type = RTE_CRYPTODEV_ARMV8_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_ARMV8_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "ARMV8 PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_ARMV8 is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_armv8_testsuite); } @@ -8756,7 +8826,22 @@ test_cryptodev_armv8(void) static int test_cryptodev_scheduler(void /*argv __rte_unused, int argc __rte_unused*/) { - gbl_cryptodev_type = RTE_CRYPTODEV_SCHEDULER_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "SCHEDULER PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_SCHEDULER is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } + + if (rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)) == -1) { + RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_MB must be" + " enabled in config file to run this testsuite.\n"); + return TEST_FAILED; +} return unit_test_suite_runner(&cryptodev_scheduler_testsuite); } @@ -8767,7 +8852,16 @@ REGISTER_TEST_COMMAND(cryptodev_scheduler_autotest, test_cryptodev_scheduler); static int test_cryptodev_dpaa2_sec(void /*argv __rte_unused, int argc __rte_unused*/) { - gbl_cryptodev_type = RTE_CRYPTODEV_DPAA2_SEC_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_DPAA2_SEC_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "DPAA2 SEC PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } + return unit_test_suite_runner(&cryptodev_dpaa2_sec_testsuite); } diff --git a/test/test/test_cryptodev_blockcipher.c b/test/test/test_cryptodev_blockcipher.c index fc27dd6305..0b512c2e9d 100644 --- a/test/test/test_cryptodev_blockcipher.c +++ b/test/test/test_cryptodev_blockcipher.c @@ -54,7 +54,7 @@ test_blockcipher_one_case(const struct blockcipher_test_case *t, struct rte_mempool *mbuf_pool, struct rte_mempool *op_mpool, uint8_t dev_id, - enum rte_cryptodev_type cryptodev_type, + int driver_id, char *test_msg) { struct rte_mbuf *ibuf = NULL; @@ -80,6 +80,19 @@ test_blockcipher_one_case(const struct blockcipher_test_case *t, uint8_t tmp_src_buf[MBUF_SIZE]; uint8_t tmp_dst_buf[MBUF_SIZE]; + int openssl_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD)); + int scheduler_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD)); + int armv8_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_ARMV8_PMD)); + int aesni_mb_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)); + int qat_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD)); + int dpaa2_sec_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_DPAA2_SEC_PMD)); + int nb_segs = 1; if (t->feature_mask & BLOCKCIPHER_TEST_FEATURE_SG) { @@ -100,18 +113,15 @@ test_blockcipher_one_case(const struct blockcipher_test_case *t, memcpy(auth_key, tdata->auth_key.data, tdata->auth_key.len); - switch (cryptodev_type) { - case RTE_CRYPTODEV_DPAA2_SEC_PMD: - case RTE_CRYPTODEV_QAT_SYM_PMD: - case RTE_CRYPTODEV_OPENSSL_PMD: - case RTE_CRYPTODEV_ARMV8_PMD: /* Fall through */ + if (driver_id == dpaa2_sec_pmd || + driver_id == qat_pmd || + driver_id == openssl_pmd || + driver_id == armv8_pmd) { /* Fall through */ digest_len = tdata->digest.len; - break; - case RTE_CRYPTODEV_AESNI_MB_PMD: - case RTE_CRYPTODEV_SCHEDULER_PMD: + } else if (driver_id == aesni_mb_pmd || + driver_id == scheduler_pmd) { digest_len = tdata->digest.truncated_len; - break; - default: + } else { snprintf(test_msg, BLOCKCIPHER_TEST_MSG_LEN, "line %u FAILED: %s", __LINE__, "Unsupported PMD type"); @@ -575,7 +585,7 @@ int test_blockcipher_all_tests(struct rte_mempool *mbuf_pool, struct rte_mempool *op_mpool, uint8_t dev_id, - enum rte_cryptodev_type cryptodev_type, + int driver_id, enum blockcipher_test_type test_type) { int status, overall_status = TEST_SUCCESS; @@ -585,6 +595,19 @@ test_blockcipher_all_tests(struct rte_mempool *mbuf_pool, uint32_t target_pmd_mask = 0; const struct blockcipher_test_case *tcs = NULL; + int openssl_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD)); + int dpaa2_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_DPAA2_SEC_PMD)); + int scheduler_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD)); + int armv8_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_ARMV8_PMD)); + int aesni_mb_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)); + int qat_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD)); + switch (test_type) { case BLKCIPHER_AES_CHAIN_TYPE: n_test_cases = sizeof(aes_chain_test_cases) / @@ -630,29 +653,20 @@ test_blockcipher_all_tests(struct rte_mempool *mbuf_pool, break; } - switch (cryptodev_type) { - case RTE_CRYPTODEV_AESNI_MB_PMD: + if (driver_id == aesni_mb_pmd) target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB; - break; - case RTE_CRYPTODEV_QAT_SYM_PMD: + else if (driver_id == qat_pmd) target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT; - break; - case RTE_CRYPTODEV_OPENSSL_PMD: + else if (driver_id == openssl_pmd) target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL; - break; - case RTE_CRYPTODEV_ARMV8_PMD: + else if (driver_id == armv8_pmd) target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8; - break; - case RTE_CRYPTODEV_SCHEDULER_PMD: + else if (driver_id == scheduler_pmd) target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER; - break; - case RTE_CRYPTODEV_DPAA2_SEC_PMD: + else if (driver_id == dpaa2_pmd) target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC; - break; - default: + else TEST_ASSERT(0, "Unrecognized cryptodev type"); - break; - } for (i = 0; i < n_test_cases; i++) { const struct blockcipher_test_case *tc = &tcs[i]; @@ -661,7 +675,7 @@ test_blockcipher_all_tests(struct rte_mempool *mbuf_pool, continue; status = test_blockcipher_one_case(tc, mbuf_pool, op_mpool, - dev_id, cryptodev_type, test_msg); + dev_id, driver_id, test_msg); printf(" %u) TestCase %s %s\n", test_index ++, tc->test_descr, test_msg); diff --git a/test/test/test_cryptodev_blockcipher.h b/test/test/test_cryptodev_blockcipher.h index 004122f2d5..22fb4201e3 100644 --- a/test/test/test_cryptodev_blockcipher.h +++ b/test/test/test_cryptodev_blockcipher.h @@ -126,7 +126,7 @@ int test_blockcipher_all_tests(struct rte_mempool *mbuf_pool, struct rte_mempool *op_mpool, uint8_t dev_id, - enum rte_cryptodev_type cryptodev_type, + int driver_id, enum blockcipher_test_type test_type); #endif /* TEST_CRYPTODEV_BLOCKCIPHER_H_ */ diff --git a/test/test/test_cryptodev_perf.c b/test/test/test_cryptodev_perf.c index e3d0479721..7193d187d2 100644 --- a/test/test/test_cryptodev_perf.c +++ b/test/test/test_cryptodev_perf.c @@ -204,23 +204,35 @@ static const char *chain_mode_name(enum chain_mode mode) } } -static const char *pmd_name(enum rte_cryptodev_type pmd) +static const char *pmd_name(uint8_t driver_id) { - switch (pmd) { - case RTE_CRYPTODEV_NULL_PMD: return RTE_STR(CRYPTODEV_NAME_NULL_PMD); break; - case RTE_CRYPTODEV_AESNI_GCM_PMD: + uint8_t null_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_NULL_PMD)); + uint8_t dpaa2_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_DPAA2_SEC_PMD)); + uint8_t snow3g_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_SNOW3G_PMD)); + uint8_t aesni_gcm_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_GCM_PMD)); + uint8_t aesni_mb_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)); + uint8_t qat_pmd = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD)); + + if (driver_id == null_pmd) + return RTE_STR(CRYPTODEV_NAME_NULL_PMD); + else if (driver_id == aesni_gcm_pmd) return RTE_STR(CRYPTODEV_NAME_AESNI_GCM_PMD); - case RTE_CRYPTODEV_AESNI_MB_PMD: + else if (driver_id == aesni_mb_pmd) return RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD); - case RTE_CRYPTODEV_QAT_SYM_PMD: + else if (driver_id == qat_pmd) return RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD); - case RTE_CRYPTODEV_SNOW3G_PMD: + else if (driver_id == snow3g_pmd) return RTE_STR(CRYPTODEV_NAME_SNOW3G_PMD); - case RTE_CRYPTODEV_DPAA2_SEC_PMD: + else if (driver_id == dpaa2_pmd) return RTE_STR(CRYPTODEV_NAME_DPAA2_SEC_PMD); - default: + else return ""; - } } static struct rte_mbuf * @@ -245,7 +257,7 @@ setup_test_string(struct rte_mempool *mpool, static struct crypto_testsuite_params testsuite_params = { NULL }; static struct crypto_unittest_params unittest_params; -static enum rte_cryptodev_type gbl_cryptodev_perftest_devtype; +static int gbl_driver_id; static int testsuite_setup(void) @@ -283,13 +295,11 @@ testsuite_setup(void) } /* Create an AESNI MB device if required */ - if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_AESNI_MB_PMD) { -#ifndef RTE_LIBRTE_PMD_AESNI_MB - RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_MB must be" - " enabled in config file to run this testsuite.\n"); - return TEST_FAILED; -#endif - nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_AESNI_MB_PMD); + if (gbl_driver_id == rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD))) { + nb_devs = rte_cryptodev_device_count_by_driver( + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD))); if (nb_devs < 1) { ret = rte_vdev_init( RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD), NULL); @@ -301,13 +311,11 @@ testsuite_setup(void) } /* Create an AESNI GCM device if required */ - if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_AESNI_GCM_PMD) { -#ifndef RTE_LIBRTE_PMD_AESNI_GCM - RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_GCM must be" - " enabled in config file to run this testsuite.\n"); - return TEST_FAILED; -#endif - nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_AESNI_GCM_PMD); + if (gbl_driver_id == rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_GCM_PMD))) { + nb_devs = rte_cryptodev_device_count_by_driver( + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_GCM_PMD))); if (nb_devs < 1) { ret = rte_vdev_init( RTE_STR(CRYPTODEV_NAME_AESNI_GCM_PMD), NULL); @@ -319,13 +327,11 @@ testsuite_setup(void) } /* Create a SNOW3G device if required */ - if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_SNOW3G_PMD) { -#ifndef RTE_LIBRTE_PMD_SNOW3G - RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_SNOW3G must be" - " enabled in config file to run this testsuite.\n"); - return TEST_FAILED; -#endif - nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_SNOW3G_PMD); + if (gbl_driver_id == rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_SNOW3G_PMD))) { + nb_devs = rte_cryptodev_device_count_by_driver( + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_SNOW3G_PMD))); if (nb_devs < 1) { ret = rte_vdev_init( RTE_STR(CRYPTODEV_NAME_SNOW3G_PMD), NULL); @@ -337,14 +343,11 @@ testsuite_setup(void) } /* Create an OPENSSL device if required */ - if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_OPENSSL_PMD) { -#ifndef RTE_LIBRTE_PMD_OPENSSL - RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_OPENSSL must be" - " enabled in config file to run this testsuite.\n"); - return TEST_FAILED; -#endif - nb_devs = rte_cryptodev_count_devtype( - RTE_CRYPTODEV_OPENSSL_PMD); + if (gbl_driver_id == rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD))) { + nb_devs = rte_cryptodev_device_count_by_driver( + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD))); if (nb_devs < 1) { ret = rte_vdev_init( RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD), @@ -357,14 +360,11 @@ testsuite_setup(void) } /* Create an ARMv8 device if required */ - if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_ARMV8_PMD) { -#ifndef RTE_LIBRTE_PMD_ARMV8_CRYPTO - RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO must be" - " enabled in config file to run this testsuite.\n"); - return TEST_FAILED; -#endif - nb_devs = rte_cryptodev_count_devtype( - RTE_CRYPTODEV_ARMV8_PMD); + if (gbl_driver_id == rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_ARMV8_PMD))) { + nb_devs = rte_cryptodev_device_count_by_driver( + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_ARMV8_PMD))); if (nb_devs < 1) { ret = rte_vdev_init( RTE_STR(CRYPTODEV_NAME_ARMV8_PMD), @@ -376,14 +376,6 @@ testsuite_setup(void) } } -#ifndef RTE_LIBRTE_PMD_QAT - if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_QAT_SYM_PMD) { - RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_QAT must be enabled " - "in config file to run this testsuite.\n"); - return TEST_FAILED; - } -#endif - nb_devs = rte_cryptodev_count(); if (nb_devs < 1) { RTE_LOG(ERR, USER1, "No crypto devices found?\n"); @@ -393,7 +385,7 @@ testsuite_setup(void) /* Search for the first valid */ for (i = 0; i < nb_devs; i++) { rte_cryptodev_info_get(i, &info); - if (info.dev_type == gbl_cryptodev_perftest_devtype) { + if (info.driver_id == (uint8_t) gbl_driver_id) { ts_params->dev_id = i; valid_dev_id = 1; break; @@ -2046,8 +2038,9 @@ test_perf_crypto_qp_vary_burst_size(uint16_t dev_num) } while (num_received != num_to_submit) { - if (gbl_cryptodev_perftest_devtype == - RTE_CRYPTODEV_AESNI_MB_PMD) + if (gbl_driver_id == + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD))) rte_cryptodev_enqueue_burst(dev_num, 0, NULL, 0); @@ -2118,7 +2111,7 @@ test_perf_snow3G_optimise_cyclecount(struct perf_test_params *pparams) if (pparams->chain == AEAD) printf("\nOn %s dev%u qp%u, %s, aead algo:%s, " "Packet Size %u bytes", - pmd_name(gbl_cryptodev_perftest_devtype), + pmd_name(gbl_driver_id), ts_params->dev_id, 0, chain_mode_name(pparams->chain), rte_crypto_aead_algorithm_strings[pparams->aead_algo], @@ -2126,7 +2119,7 @@ test_perf_snow3G_optimise_cyclecount(struct perf_test_params *pparams) else printf("\nOn %s dev%u qp%u, %s, cipher algo:%s, auth_algo:%s, " "Packet Size %u bytes", - pmd_name(gbl_cryptodev_perftest_devtype), + pmd_name(gbl_driver_id), ts_params->dev_id, 0, chain_mode_name(pparams->chain), rte_crypto_cipher_algorithm_strings[pparams->cipher_algo], @@ -2170,8 +2163,9 @@ test_perf_snow3G_optimise_cyclecount(struct perf_test_params *pparams) } while (num_ops_received != num_to_submit) { - if (gbl_cryptodev_perftest_devtype == - RTE_CRYPTODEV_AESNI_MB_PMD) + if (gbl_driver_id == + rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD))) rte_cryptodev_enqueue_burst(ts_params->dev_id, 0, NULL, 0); start_cycles = rte_rdtsc_precise(); @@ -2322,7 +2316,7 @@ test_perf_openssl_optimise_cyclecount(struct perf_test_params *pparams) if (pparams->chain == AEAD) printf("\nOn %s dev%u qp%u, %s, aead_algo:%s, " "key length:%u, Packet Size %u bytes", - pmd_name(gbl_cryptodev_perftest_devtype), + pmd_name(gbl_driver_id), ts_params->dev_id, 0, chain_mode_name(pparams->chain), rte_crypto_aead_algorithm_strings[pparams->aead_algo], @@ -2331,7 +2325,7 @@ test_perf_openssl_optimise_cyclecount(struct perf_test_params *pparams) else printf("\nOn %s dev%u qp%u, %s, cipher algo:%s, auth_algo:%s, " "key length:%u, Packet Size %u bytes", - pmd_name(gbl_cryptodev_perftest_devtype), + pmd_name(gbl_driver_id), ts_params->dev_id, 0, chain_mode_name(pparams->chain), rte_crypto_cipher_algorithm_strings[pparams->cipher_algo], @@ -2464,7 +2458,7 @@ test_perf_armv8_optimise_cyclecount(struct perf_test_params *pparams) printf("\nOn %s dev%u qp%u, %s, cipher algo:%s, cipher key length:%u, " "auth_algo:%s, Packet Size %u bytes", - pmd_name(gbl_cryptodev_perftest_devtype), + pmd_name(gbl_driver_id), ts_params->dev_id, 0, chain_mode_name(pparams->chain), rte_crypto_cipher_algorithm_strings[pparams->cipher_algo], @@ -3399,7 +3393,8 @@ test_perf_snow3g(uint8_t dev_id, uint16_t queue_id, double cycles_B = cycles_buff / pparams->buf_size; double throughput = (ops_s * pparams->buf_size * 8) / 1000000; - if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_QAT_SYM_PMD) { + if (gbl_driver_id == rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD))) { /* Cycle count misleading on HW devices for this test, so don't print */ printf("%4u\t%6.2f\t%10.2f\t n/a \t\t n/a " "\t\t n/a \t\t%8"PRIu64"\t%8"PRIu64, @@ -3837,7 +3832,7 @@ test_perf_snow3G_vary_pkt_size(void) params_set[i].auth_algo; printf("\nOn %s dev%u qp%u, %s, " "cipher algo:%s, auth algo:%s, burst_size: %d ops", - pmd_name(gbl_cryptodev_perftest_devtype), + pmd_name(gbl_driver_id), testsuite_params.dev_id, 0, chain_mode_name(params_set[i].chain), rte_crypto_cipher_algorithm_strings[cipher_algo], @@ -4683,7 +4678,15 @@ static struct unit_test_suite cryptodev_armv8_testsuite = { static int perftest_aesni_gcm_cryptodev(void) { - gbl_cryptodev_perftest_devtype = RTE_CRYPTODEV_AESNI_GCM_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_GCM_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "AESNI GCM PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_AESNI_GCM is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_gcm_testsuite); } @@ -4691,7 +4694,15 @@ perftest_aesni_gcm_cryptodev(void) static int perftest_aesni_mb_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/) { - gbl_cryptodev_perftest_devtype = RTE_CRYPTODEV_AESNI_MB_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "AESNI MB PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_AESNI_MB is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_aes_testsuite); } @@ -4699,7 +4710,15 @@ perftest_aesni_mb_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/) static int perftest_qat_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/) { - gbl_cryptodev_perftest_devtype = RTE_CRYPTODEV_QAT_SYM_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "QAT PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_QAT is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_testsuite); } @@ -4707,7 +4726,15 @@ perftest_qat_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/) static int perftest_sw_snow3g_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/) { - gbl_cryptodev_perftest_devtype = RTE_CRYPTODEV_SNOW3G_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_SNOW3G_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "SNOW3G PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_SNOW3G is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_snow3g_testsuite); } @@ -4715,7 +4742,15 @@ perftest_sw_snow3g_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/) static int perftest_qat_snow3g_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/) { - gbl_cryptodev_perftest_devtype = RTE_CRYPTODEV_QAT_SYM_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "QAT PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_QAT is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_snow3g_testsuite); } @@ -4723,7 +4758,15 @@ perftest_qat_snow3g_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/) static int perftest_openssl_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/) { - gbl_cryptodev_perftest_devtype = RTE_CRYPTODEV_OPENSSL_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "OpenSSL PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_OPENSSL is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_openssl_testsuite); } @@ -4731,7 +4774,15 @@ perftest_openssl_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/) static int perftest_qat_continual_cryptodev(void) { - gbl_cryptodev_perftest_devtype = RTE_CRYPTODEV_QAT_SYM_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "QAT PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_QAT is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_qat_continual_testsuite); } @@ -4739,7 +4790,15 @@ perftest_qat_continual_cryptodev(void) static int perftest_sw_armv8_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/) { - gbl_cryptodev_perftest_devtype = RTE_CRYPTODEV_ARMV8_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_ARMV8_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "ARMV8 PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_ARMV8 is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_armv8_testsuite); } @@ -4747,7 +4806,15 @@ perftest_sw_armv8_cryptodev(void /*argv __rte_unused, int argc __rte_unused*/) static int perftest_dpaa2_sec_cryptodev(void) { - gbl_cryptodev_perftest_devtype = RTE_CRYPTODEV_DPAA2_SEC_PMD; + gbl_driver_id = rte_cryptodev_driver_id_get( + RTE_STR(CRYPTODEV_NAME_DPAA2_SEC_PMD)); + + if (gbl_driver_id == -1) { + RTE_LOG(ERR, USER1, "DPAA2 SEC PMD must be loaded. Check if " + "CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC is enabled " + "in config file to run this testsuite.\n"); + return TEST_FAILED; + } return unit_test_suite_runner(&cryptodev_dpaa2_sec_testsuite); }