From: Alejandro Lucero Date: Fri, 24 Nov 2017 14:24:37 +0000 (+0000) Subject: net/nfp: fix jumbo settings X-Git-Tag: spdx-start~616 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=c70ccbc79d8a0b7327f98f6072da75a530c4102a;p=dpdk.git net/nfp: fix jumbo settings When jumbo frames is configured, the hardware mtu needs to be updated to the specified max_rx_pkt_len. Also, changing mtu should be avoided once the PMD port started. Fixes: defb9a5dd156 ("nfp: introduce driver initialization") Cc: stable@dpdk.org Signed-off-by: Alejandro Lucero --- diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c index 9a7b0b22e2..4aec94d585 100644 --- a/drivers/net/nfp/nfp_net.c +++ b/drivers/net/nfp/nfp_net.c @@ -489,7 +489,7 @@ nfp_net_configure(struct rte_eth_dev *dev) } if (rxmode->jumbo_frame) - /* this is handled in rte_eth_dev_configure */ + hw->mtu = rxmode->max_rx_pkt_len; if (rxmode->hw_strip_crc) { PMD_INIT_LOG(INFO, "strip CRC not supported"); @@ -1469,6 +1469,13 @@ nfp_net_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) if ((mtu < ETHER_MIN_MTU) || ((uint32_t)mtu > hw->max_mtu)) return -EINVAL; + /* mtu setting is forbidden if port is started */ + if (dev->data->dev_started) { + PMD_DRV_LOG(ERR, "port %d must be stopped before configuration", + dev->data->port_id); + return -EBUSY; + } + /* switch to jumbo mode if needed */ if ((uint32_t)mtu > ETHER_MAX_LEN) dev->data->dev_conf.rxmode.jumbo_frame = 1;