From: Radu Nicolau Date: Wed, 31 May 2017 11:10:25 +0000 (+0100) Subject: ethdev: move bypass functions to ixgbe PMD X-Git-Tag: spdx-start~3084 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=e261265e42a15164aa649521227f7c2c4740c703;p=dpdk.git ethdev: move bypass functions to ixgbe PMD Move all bypass functions to ixgbe pmd and remove function pointers from the eth_dev_ops struct. Signed-off-by: Radu Nicolau Acked-by: Wenzhuo Lu --- diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index 0afac68c77..58463aa098 100644 --- a/app/test-pmd/cmdline.c +++ b/app/test-pmd/cmdline.c @@ -523,7 +523,6 @@ static void cmd_help_long_parsed(void *parsed_result, " Flush (default) or don't flush RX streams before" " forwarding. Mainly used with PCAP drivers.\n\n" - #ifdef RTE_NIC_BYPASS "set bypass mode (normal|bypass|isolate) (port_id)\n" " Set the bypass mode for the lowest port on bypass enabled" " NIC.\n\n" @@ -546,7 +545,7 @@ static void cmd_help_long_parsed(void *parsed_result, "show bypass config (port_id)\n" " Show the bypass configuration for a bypass enabled NIC" " using the lowest port on the NIC.\n\n" -#endif + #ifdef RTE_LIBRTE_PMD_BOND "create bonded device (mode) (socket)\n" " Create a new bonded device with specific bonding mode and socket.\n\n" @@ -3904,7 +3903,6 @@ cmdline_parse_inst_t cmd_set_link_check = { }, }; -#ifdef RTE_NIC_BYPASS /* *** SET NIC BYPASS MODE *** */ struct cmd_set_bypass_mode_result { cmdline_fixed_string_t set; @@ -3921,19 +3919,23 @@ cmd_set_bypass_mode_parsed(void *parsed_result, { struct cmd_set_bypass_mode_result *res = parsed_result; portid_t port_id = res->port_id; - uint32_t bypass_mode = RTE_BYPASS_MODE_NORMAL; + int32_t rc = -EINVAL; + +#ifdef RTE_LIBRTE_IXGBE_BYPASS + uint32_t bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL; if (!strcmp(res->value, "bypass")) - bypass_mode = RTE_BYPASS_MODE_BYPASS; + bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_BYPASS; else if (!strcmp(res->value, "isolate")) - bypass_mode = RTE_BYPASS_MODE_ISOLATE; + bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_ISOLATE; else - bypass_mode = RTE_BYPASS_MODE_NORMAL; + bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL; /* Set the bypass mode for the relevant port. */ - if (0 != rte_eth_dev_bypass_state_set(port_id, &bypass_mode)) { + rc = rte_pmd_ixgbe_bypass_state_set(port_id, &bypass_mode); +#endif + if (rc != 0) printf("\t Failed to set bypass mode for port = %d.\n", port_id); - } } cmdline_parse_token_string_t cmd_setbypass_mode_set = @@ -3983,51 +3985,57 @@ cmd_set_bypass_event_parsed(void *parsed_result, __attribute__((unused)) struct cmdline *cl, __attribute__((unused)) void *data) { - int32_t rc; + int32_t rc = -EINVAL; struct cmd_set_bypass_event_result *res = parsed_result; portid_t port_id = res->port_id; - uint32_t bypass_event = RTE_BYPASS_EVENT_NONE; - uint32_t bypass_mode = RTE_BYPASS_MODE_NORMAL; + +#ifdef RTE_LIBRTE_IXGBE_BYPASS + uint32_t bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_NONE; + uint32_t bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL; if (!strcmp(res->event_value, "timeout")) - bypass_event = RTE_BYPASS_EVENT_TIMEOUT; + bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_TIMEOUT; else if (!strcmp(res->event_value, "os_on")) - bypass_event = RTE_BYPASS_EVENT_OS_ON; + bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_OS_ON; else if (!strcmp(res->event_value, "os_off")) - bypass_event = RTE_BYPASS_EVENT_OS_OFF; + bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_OS_OFF; else if (!strcmp(res->event_value, "power_on")) - bypass_event = RTE_BYPASS_EVENT_POWER_ON; + bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_POWER_ON; else if (!strcmp(res->event_value, "power_off")) - bypass_event = RTE_BYPASS_EVENT_POWER_OFF; + bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_POWER_OFF; else - bypass_event = RTE_BYPASS_EVENT_NONE; + bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_NONE; if (!strcmp(res->mode_value, "bypass")) - bypass_mode = RTE_BYPASS_MODE_BYPASS; + bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_BYPASS; else if (!strcmp(res->mode_value, "isolate")) - bypass_mode = RTE_BYPASS_MODE_ISOLATE; + bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_ISOLATE; else - bypass_mode = RTE_BYPASS_MODE_NORMAL; + bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL; /* Set the watchdog timeout. */ - if (bypass_event == RTE_BYPASS_EVENT_TIMEOUT) { + if (bypass_event == RTE_PMD_IXGBE_BYPASS_EVENT_TIMEOUT) { rc = -EINVAL; - if (!RTE_BYPASS_TMT_VALID(bypass_timeout) || - (rc = rte_eth_dev_wd_timeout_store(port_id, - bypass_timeout)) != 0) { + if (RTE_PMD_IXGBE_BYPASS_TMT_VALID(bypass_timeout)) { + rc = rte_pmd_ixgbe_bypass_wd_timeout_store(port_id, + bypass_timeout); + } + if (rc != 0) { printf("Failed to set timeout value %u " - "for port %d, errto code: %d.\n", - bypass_timeout, port_id, rc); + "for port %d, errto code: %d.\n", + bypass_timeout, port_id, rc); } } /* Set the bypass event to transition to bypass mode. */ - if (0 != rte_eth_dev_bypass_event_store(port_id, - bypass_event, bypass_mode)) { - printf("\t Failed to set bypass event for port = %d.\n", port_id); - } + rc = rte_pmd_ixgbe_bypass_event_store(port_id, bypass_event, + bypass_mode); +#endif + if (rc != 0) + printf("\t Failed to set bypass event for port = %d.\n", + port_id); } cmdline_parse_token_string_t cmd_setbypass_event_set = @@ -4084,24 +4092,26 @@ cmd_set_bypass_timeout_parsed(void *parsed_result, __attribute__((unused)) struct cmdline *cl, __attribute__((unused)) void *data) { - struct cmd_set_bypass_timeout_result *res = parsed_result; + __rte_unused struct cmd_set_bypass_timeout_result *res = parsed_result; +#ifdef RTE_LIBRTE_IXGBE_BYPASS if (!strcmp(res->value, "1.5")) - bypass_timeout = RTE_BYPASS_TMT_1_5_SEC; + bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_1_5_SEC; else if (!strcmp(res->value, "2")) - bypass_timeout = RTE_BYPASS_TMT_2_SEC; + bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_2_SEC; else if (!strcmp(res->value, "3")) - bypass_timeout = RTE_BYPASS_TMT_3_SEC; + bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_3_SEC; else if (!strcmp(res->value, "4")) - bypass_timeout = RTE_BYPASS_TMT_4_SEC; + bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_4_SEC; else if (!strcmp(res->value, "8")) - bypass_timeout = RTE_BYPASS_TMT_8_SEC; + bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_8_SEC; else if (!strcmp(res->value, "16")) - bypass_timeout = RTE_BYPASS_TMT_16_SEC; + bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_16_SEC; else if (!strcmp(res->value, "32")) - bypass_timeout = RTE_BYPASS_TMT_32_SEC; + bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_32_SEC; else - bypass_timeout = RTE_BYPASS_TMT_OFF; + bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF; +#endif } cmdline_parse_token_string_t cmd_setbypass_timeout_set = @@ -4145,17 +4155,19 @@ cmd_show_bypass_config_parsed(void *parsed_result, __attribute__((unused)) void *data) { struct cmd_show_bypass_config_result *res = parsed_result; + portid_t port_id = res->port_id; + int rc = -EINVAL; +#ifdef RTE_LIBRTE_IXGBE_BYPASS uint32_t event_mode; uint32_t bypass_mode; - portid_t port_id = res->port_id; uint32_t timeout = bypass_timeout; int i; - static const char * const timeouts[RTE_BYPASS_TMT_NUM] = + static const char * const timeouts[RTE_PMD_IXGBE_BYPASS_TMT_NUM] = {"off", "1.5", "2", "3", "4", "8", "16", "32"}; - static const char * const modes[RTE_BYPASS_MODE_NUM] = + static const char * const modes[RTE_PMD_IXGBE_BYPASS_MODE_NUM] = {"UNKNOWN", "normal", "bypass", "isolate"}; - static const char * const events[RTE_BYPASS_EVENT_NUM] = { + static const char * const events[RTE_PMD_IXGBE_BYPASS_EVENT_NUM] = { "NONE", "OS/board on", "power supply on", @@ -4165,37 +4177,41 @@ cmd_show_bypass_config_parsed(void *parsed_result, int num_events = (sizeof events) / (sizeof events[0]); /* Display the bypass mode.*/ - if (0 != rte_eth_dev_bypass_state_show(port_id, &bypass_mode)) { + if (rte_pmd_ixgbe_bypass_state_show(port_id, &bypass_mode) != 0) { printf("\tFailed to get bypass mode for port = %d\n", port_id); return; } else { - if (!RTE_BYPASS_MODE_VALID(bypass_mode)) - bypass_mode = RTE_BYPASS_MODE_NONE; + if (!RTE_PMD_IXGBE_BYPASS_MODE_VALID(bypass_mode)) + bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NONE; printf("\tbypass mode = %s\n", modes[bypass_mode]); } /* Display the bypass timeout.*/ - if (!RTE_BYPASS_TMT_VALID(timeout)) - timeout = RTE_BYPASS_TMT_OFF; + if (!RTE_PMD_IXGBE_BYPASS_TMT_VALID(timeout)) + timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF; printf("\tbypass timeout = %s\n", timeouts[timeout]); /* Display the bypass events and associated modes. */ - for (i = RTE_BYPASS_EVENT_START; i < num_events; i++) { + for (i = RTE_PMD_IXGBE_BYPASS_EVENT_START; i < num_events; i++) { - if (0 != rte_eth_dev_bypass_event_show(port_id, i, &event_mode)) { + if (rte_pmd_ixgbe_bypass_event_show(port_id, i, &event_mode)) { printf("\tFailed to get bypass mode for event = %s\n", events[i]); } else { - if (!RTE_BYPASS_MODE_VALID(event_mode)) - event_mode = RTE_BYPASS_MODE_NONE; + if (!RTE_PMD_IXGBE_BYPASS_MODE_VALID(event_mode)) + event_mode = RTE_PMD_IXGBE_BYPASS_MODE_NONE; printf("\tbypass event: %-16s = %s\n", events[i], modes[event_mode]); } } +#endif + if (rc != 0) + printf("\tFailed to get bypass configuration for port = %d\n", + port_id); } cmdline_parse_token_string_t cmd_showbypass_config_show = @@ -4224,7 +4240,6 @@ cmdline_parse_inst_t cmd_show_bypass_config = { NULL, }, }; -#endif #ifdef RTE_LIBRTE_PMD_BOND /* *** SET BONDING MODE *** */ @@ -13597,12 +13612,10 @@ cmdline_parse_ctx_t main_ctx[] = { (cmdline_parse_inst_t *)&cmd_set_allmulti_mode_all, (cmdline_parse_inst_t *)&cmd_set_flush_rx, (cmdline_parse_inst_t *)&cmd_set_link_check, -#ifdef RTE_NIC_BYPASS (cmdline_parse_inst_t *)&cmd_set_bypass_mode, (cmdline_parse_inst_t *)&cmd_set_bypass_event, (cmdline_parse_inst_t *)&cmd_set_bypass_timeout, (cmdline_parse_inst_t *)&cmd_show_bypass_config, -#endif #ifdef RTE_LIBRTE_PMD_BOND (cmdline_parse_inst_t *) &cmd_set_bonding_mode, (cmdline_parse_inst_t *) &cmd_show_bonding_config, diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index d1041afa50..17ae446c9b 100644 --- a/app/test-pmd/testpmd.c +++ b/app/test-pmd/testpmd.c @@ -73,6 +73,9 @@ #include #include #include +#ifdef RTE_LIBRTE_IXGBE_PMD +#include +#endif #ifdef RTE_LIBRTE_PMD_XENVIRT #include #endif @@ -295,13 +298,13 @@ uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) | /* * NIC bypass mode configuration options. */ -#ifdef RTE_NIC_BYPASS +#ifdef RTE_LIBRTE_IXGBE_BYPASS /* The NIC bypass watchdog timeout. */ -uint32_t bypass_timeout = RTE_BYPASS_TMT_OFF; - +uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF; #endif + #ifdef RTE_LIBRTE_LATENCY_STATS /* @@ -2012,8 +2015,8 @@ init_port_config(void) rte_eth_macaddr_get(pid, &port->eth_addr); map_port_queue_stats_mapping_registers(pid, port); -#ifdef RTE_NIC_BYPASS - rte_eth_dev_bypass_init(pid); +#ifdef RTE_LIBRTE_IXGBE_BYPASS + rte_pmd_ixgbe_bypass_init(pid); #endif if (lsc_interrupt && diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index e6c43ba03b..2efa3ccc7f 100644 --- a/app/test-pmd/testpmd.h +++ b/app/test-pmd/testpmd.h @@ -311,7 +311,7 @@ extern uint8_t rmv_interrupt; /**< disabled by "--no-rmv-interrupt" parameter */ extern uint32_t event_print_mask; /**< set by "--print-event xxxx" and "--mask-event xxxx parameters */ -#ifdef RTE_NIC_BYPASS +#ifdef RTE_LIBRTE_IXGBE_BYPASS extern uint32_t bypass_timeout; /**< Store the NIC bypass watchdog timeout */ #endif diff --git a/config/common_base b/config/common_base index 89825ae4ba..0e0b73217b 100644 --- a/config/common_base +++ b/config/common_base @@ -144,11 +144,6 @@ CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y # CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n -# -# Support NIC bypass logic -# -CONFIG_RTE_NIC_BYPASS=n - # # Compile burst-oriented Amazon ENA PMD driver # @@ -182,6 +177,7 @@ CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n CONFIG_RTE_IXGBE_INC_VECTOR=y +CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n # # Compile burst-oriented I40E PMD driver diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index ba9b5a21b4..1786a59dda 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -38,29 +38,6 @@ Deprecation Notices ``_rte_eth_dev_callback_process``. In 17.08 the function will return an ``int`` instead of ``void`` and a fourth parameter ``void *ret_param`` will be added. -* ethdev: for 17.08 it is planned to deprecate the following nine rte_eth_dev_* - functions and move them into the ixgbe PMD: - - ``rte_eth_dev_bypass_init``, ``rte_eth_dev_bypass_state_set``, - ``rte_eth_dev_bypass_state_show``, ``rte_eth_dev_bypass_event_store``, - ``rte_eth_dev_bypass_event_show``, ``rte_eth_dev_wd_timeout_store``, - ``rte_eth_dev_bypass_wd_timeout_show``, ``rte_eth_dev_bypass_ver_show``, - ``rte_eth_dev_bypass_wd_reset``. - - The following fields will be removed from ``struct eth_dev_ops``: - - ``bypass_init_t``, ``bypass_state_set_t``, ``bypass_state_show_t``, - ``bypass_event_set_t``, ``bypass_event_show_t``, ``bypass_wd_timeout_set_t``, - ``bypass_wd_timeout_show_t``, ``bypass_ver_show_t``, ``bypass_wd_reset_t``. - - The functions will be renamed to the following, and moved to the ``ixgbe`` PMD: - - ``rte_pmd_ixgbe_bypass_init``, ``rte_pmd_ixgbe_bypass_state_set``, - ``rte_pmd_ixgbe_bypass_state_show``, ``rte_pmd_ixgbe_bypass_event_set``, - ``rte_pmd_ixgbe_bypass_event_show``, ``rte_pmd_ixgbe_bypass_wd_timeout_set``, - ``rte_pmd_ixgbe_bypass_wd_timeout_show``, ``rte_pmd_ixgbe_bypass_ver_show``, - ``rte_pmd_ixgbe_bypass_wd_reset``. - * The mbuf flags PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated and are respectively replaced by PKT_RX_VLAN_STRIPPED and PKT_RX_QINQ_STRIPPED, that are better described. The old flags and diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ixgbe/Makefile index 5529d81cbd..6a651b9237 100644 --- a/drivers/net/ixgbe/Makefile +++ b/drivers/net/ixgbe/Makefile @@ -119,7 +119,7 @@ else SRCS-$(CONFIG_RTE_IXGBE_INC_VECTOR) += ixgbe_rxtx_vec_sse.c endif -ifeq ($(CONFIG_RTE_NIC_BYPASS),y) +ifeq ($(CONFIG_RTE_LIBRTE_IXGBE_BYPASS),y) SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_bypass.c SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_82599_bypass.c endif diff --git a/drivers/net/ixgbe/ixgbe_bypass.c b/drivers/net/ixgbe/ixgbe_bypass.c index 70069284ee..38a4493670 100644 --- a/drivers/net/ixgbe/ixgbe_bypass.c +++ b/drivers/net/ixgbe/ixgbe_bypass.c @@ -36,6 +36,7 @@ #include #include "ixgbe_ethdev.h" #include "ixgbe_bypass_api.h" +#include "rte_pmd_ixgbe.h" #define BYPASS_STATUS_OFF_MASK 3 @@ -284,7 +285,7 @@ ixgbe_bypass_wd_timeout_store(struct rte_eth_dev *dev, u32 timeout) FUNC_PTR_OR_ERR_RET(adapter->bps.ops.bypass_set, -ENOTSUP); /* disable the timer with timeout of zero */ - if (timeout == RTE_BYPASS_TMT_OFF) { + if (timeout == RTE_PMD_IXGBE_BYPASS_TMT_OFF) { status = 0x0; /* WDG enable off */ mask = BYPASS_WDT_ENABLE_M; } else { @@ -355,7 +356,7 @@ ixgbe_bypass_wd_timeout_show(struct rte_eth_dev *dev, u32 *wd_timeout) wdg = by_ctl & BYPASS_WDT_ENABLE_M; if (!wdg) - *wd_timeout = RTE_BYPASS_TMT_OFF; + *wd_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF; else *wd_timeout = (by_ctl >> BYPASS_WDT_TIME_SHIFT) & BYPASS_WDT_MASK; diff --git a/drivers/net/ixgbe/ixgbe_bypass.h b/drivers/net/ixgbe/ixgbe_bypass.h index 5f5c63e37d..09155bb36d 100644 --- a/drivers/net/ixgbe/ixgbe_bypass.h +++ b/drivers/net/ixgbe/ixgbe_bypass.h @@ -34,7 +34,7 @@ #ifndef _IXGBE_BYPASS_H_ #define _IXGBE_BYPASS_H_ -#ifdef RTE_NIC_BYPASS +#ifdef RTE_LIBRTE_IXGBE_BYPASS struct ixgbe_bypass_mac_ops { s32 (*bypass_rw)(struct ixgbe_hw *hw, u32 cmd, u32 *status); @@ -63,6 +63,6 @@ s32 ixgbe_bypass_wd_reset(struct rte_eth_dev *dev); s32 ixgbe_bypass_init_shared_code(struct ixgbe_hw *hw); s32 ixgbe_bypass_init_hw(struct ixgbe_hw *hw); -#endif /* RTE_NIC_BYPASS */ +#endif /* RTE_LIBRTE_IXGBE_BYPASS */ #endif /* _IXGBE_BYPASS_H_ */ diff --git a/drivers/net/ixgbe/ixgbe_bypass_api.h b/drivers/net/ixgbe/ixgbe_bypass_api.h index aec8f1ec34..d52fde0461 100644 --- a/drivers/net/ixgbe/ixgbe_bypass_api.h +++ b/drivers/net/ixgbe/ixgbe_bypass_api.h @@ -34,7 +34,7 @@ #ifndef _IXGBE_BYPASS_API_H_ #define _IXGBE_BYPASS_API_H_ -#ifdef RTE_NIC_BYPASS +#ifdef RTE_LIBRTE_IXGBE_BYPASS #include "ixgbe_bypass_defines.h" /** @@ -295,6 +295,6 @@ static s32 ixgbe_bypass_rd_eep_generic(struct ixgbe_hw *hw, u32 addr, u8 *value) return 0; } -#endif /* RTE_NIC_BYPASS */ +#endif /* RTE_LIBRTE_IXGBE_BYPASS */ #endif /* _IXGBE_BYPASS_API_H_ */ diff --git a/drivers/net/ixgbe/ixgbe_bypass_defines.h b/drivers/net/ixgbe/ixgbe_bypass_defines.h index cafcb278cb..d12c271402 100644 --- a/drivers/net/ixgbe/ixgbe_bypass_defines.h +++ b/drivers/net/ixgbe/ixgbe_bypass_defines.h @@ -34,7 +34,7 @@ #ifndef _IXGBE_BYPASS_DEFINES_H_ #define _IXGBE_BYPASS_DEFINES_H_ -#ifdef RTE_NIC_BYPASS +#ifdef RTE_LIBRTE_IXGBE_BYPASS #define msleep(x) rte_delay_us(x*1000) #define usleep_range(min, max) rte_delay_us(min) @@ -155,6 +155,6 @@ enum ixgbe_state_t { #define IXGBE_BYPASS_FW_WRITE_FAILURE -35 -#endif /* RTE_NIC_BYPASS */ +#endif /* RTE_LIBRTE_IXGBE_BYPASS */ #endif /* _IXGBE_BYPASS_DEFINES_H_ */ diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c index c28d87e3f6..504e951595 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.c +++ b/drivers/net/ixgbe/ixgbe_ethdev.c @@ -481,7 +481,7 @@ static const struct rte_pci_id pci_id_ixgbe_map[] = { { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_1G_T_L) }, { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_KX4) }, { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_KR) }, -#ifdef RTE_NIC_BYPASS +#ifdef RTE_LIBRTE_IXGBE_BYPASS { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_BYPASS) }, #endif { .vendor_id = 0, /* sentinel */ }, @@ -575,17 +575,6 @@ static const struct eth_dev_ops ixgbe_eth_dev_ops = { .set_queue_rate_limit = ixgbe_set_queue_rate_limit, .reta_update = ixgbe_dev_rss_reta_update, .reta_query = ixgbe_dev_rss_reta_query, -#ifdef RTE_NIC_BYPASS - .bypass_init = ixgbe_bypass_init, - .bypass_state_set = ixgbe_bypass_state_store, - .bypass_state_show = ixgbe_bypass_state_show, - .bypass_event_set = ixgbe_bypass_event_store, - .bypass_event_show = ixgbe_bypass_event_show, - .bypass_wd_timeout_set = ixgbe_bypass_wd_timeout_store, - .bypass_wd_timeout_show = ixgbe_bypass_wd_timeout_show, - .bypass_ver_show = ixgbe_bypass_ver_show, - .bypass_wd_reset = ixgbe_bypass_wd_reset, -#endif /* RTE_NIC_BYPASS */ .rss_hash_update = ixgbe_dev_rss_hash_update, .rss_hash_conf_get = ixgbe_dev_rss_hash_conf_get, .filter_ctrl = ixgbe_dev_filter_ctrl, @@ -1190,11 +1179,11 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev) hw->allow_unsupported_sfp = 1; /* Initialize the shared code (base driver) */ -#ifdef RTE_NIC_BYPASS +#ifdef RTE_LIBRTE_IXGBE_BYPASS diag = ixgbe_bypass_init_shared_code(hw); #else diag = ixgbe_init_shared_code(hw); -#endif /* RTE_NIC_BYPASS */ +#endif /* RTE_LIBRTE_IXGBE_BYPASS */ if (diag != IXGBE_SUCCESS) { PMD_INIT_LOG(ERR, "Shared code init failed: %d", diag); @@ -1227,11 +1216,11 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev) return -EIO; } -#ifdef RTE_NIC_BYPASS +#ifdef RTE_LIBRTE_IXGBE_BYPASS diag = ixgbe_bypass_init_hw(hw); #else diag = ixgbe_init_hw(hw); -#endif /* RTE_NIC_BYPASS */ +#endif /* RTE_LIBRTE_IXGBE_BYPASS */ /* * Devices with copper phys will fail to initialise if ixgbe_init_hw() @@ -2774,7 +2763,7 @@ ixgbe_dev_set_link_up(struct rte_eth_dev *dev) struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private); if (hw->mac.type == ixgbe_mac_82599EB) { -#ifdef RTE_NIC_BYPASS +#ifdef RTE_LIBRTE_IXGBE_BYPASS if (hw->device_id == IXGBE_DEV_ID_82599_BYPASS) { /* Not suported in bypass mode */ PMD_INIT_LOG(ERR, "Set link up is not supported " @@ -2804,7 +2793,7 @@ ixgbe_dev_set_link_down(struct rte_eth_dev *dev) struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private); if (hw->mac.type == ixgbe_mac_82599EB) { -#ifdef RTE_NIC_BYPASS +#ifdef RTE_LIBRTE_IXGBE_BYPASS if (hw->device_id == IXGBE_DEV_ID_82599_BYPASS) { /* Not suported in bypass mode */ PMD_INIT_LOG(ERR, "Set link down is not supported " diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h index 32c0b38701..3ddfc6952f 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.h +++ b/drivers/net/ixgbe/ixgbe_ethdev.h @@ -450,9 +450,9 @@ struct ixgbe_adapter { struct ixgbe_mirror_info mr_data; struct ixgbe_vf_info *vfdata; struct ixgbe_uta_info uta_info; -#ifdef RTE_NIC_BYPASS +#ifdef RTE_LIBRTE_IXGBE_BYPASS struct ixgbe_bypass_info bps; -#endif /* RTE_NIC_BYPASS */ +#endif /* RTE_LIBRTE_IXGBE_BYPASS */ struct ixgbe_filter_info filter; struct ixgbe_l2_tn_info l2_tn; struct ixgbe_bw_conf bw_conf; diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.c b/drivers/net/ixgbe/rte_pmd_ixgbe.c index d6eae6c469..79897ff643 100644 --- a/drivers/net/ixgbe/rte_pmd_ixgbe.c +++ b/drivers/net/ixgbe/rte_pmd_ixgbe.c @@ -908,3 +908,136 @@ rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port, return 0; } + +#ifdef RTE_LIBRTE_IXGBE_BYPASS +int +rte_pmd_ixgbe_bypass_init(uint8_t port_id) +{ + struct rte_eth_dev *dev; + + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); + + dev = &rte_eth_devices[port_id]; + if (!is_ixgbe_supported(dev)) + return -ENOTSUP; + + ixgbe_bypass_init(dev); + return 0; +} + +int +rte_pmd_ixgbe_bypass_state_show(uint8_t port_id, uint32_t *state) +{ + struct rte_eth_dev *dev; + + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); + + dev = &rte_eth_devices[port_id]; + if (!is_ixgbe_supported(dev)) + return -ENOTSUP; + + return ixgbe_bypass_state_show(dev, state); +} + +int +rte_pmd_ixgbe_bypass_state_set(uint8_t port_id, uint32_t *new_state) +{ + struct rte_eth_dev *dev; + + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); + + dev = &rte_eth_devices[port_id]; + if (!is_ixgbe_supported(dev)) + return -ENOTSUP; + + return ixgbe_bypass_state_store(dev, new_state); +} + +int +rte_pmd_ixgbe_bypass_event_show(uint8_t port_id, + uint32_t event, + uint32_t *state) +{ + struct rte_eth_dev *dev; + + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); + + dev = &rte_eth_devices[port_id]; + if (!is_ixgbe_supported(dev)) + return -ENOTSUP; + + return ixgbe_bypass_event_show(dev, event, state); +} + +int +rte_pmd_ixgbe_bypass_event_store(uint8_t port_id, + uint32_t event, + uint32_t state) +{ + struct rte_eth_dev *dev; + + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); + + dev = &rte_eth_devices[port_id]; + if (!is_ixgbe_supported(dev)) + return -ENOTSUP; + + return ixgbe_bypass_event_store(dev, event, state); +} + +int +rte_pmd_ixgbe_bypass_wd_timeout_store(uint8_t port_id, uint32_t timeout) +{ + struct rte_eth_dev *dev; + + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); + + dev = &rte_eth_devices[port_id]; + if (!is_ixgbe_supported(dev)) + return -ENOTSUP; + + return ixgbe_bypass_wd_timeout_store(dev, timeout); +} + +int +rte_pmd_ixgbe_bypass_ver_show(uint8_t port_id, uint32_t *ver) +{ + struct rte_eth_dev *dev; + + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); + + dev = &rte_eth_devices[port_id]; + if (!is_ixgbe_supported(dev)) + return -ENOTSUP; + + return ixgbe_bypass_ver_show(dev, ver); +} + +int +rte_pmd_ixgbe_bypass_wd_timeout_show(uint8_t port_id, uint32_t *wd_timeout) +{ + struct rte_eth_dev *dev; + + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); + + dev = &rte_eth_devices[port_id]; + if (!is_ixgbe_supported(dev)) + return -ENOTSUP; + + return ixgbe_bypass_wd_timeout_show(dev, wd_timeout); +} + +int +rte_pmd_ixgbe_bypass_wd_reset(uint8_t port_id) +{ + struct rte_eth_dev *dev; + + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); + + dev = &rte_eth_devices[port_id]; + if (!is_ixgbe_supported(dev)) + return -ENOTSUP; + + return ixgbe_bypass_wd_reset(dev); +} +#endif diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h b/drivers/net/ixgbe/rte_pmd_ixgbe.h index 1f2b1bd791..d33c285dbf 100644 --- a/drivers/net/ixgbe/rte_pmd_ixgbe.h +++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h @@ -427,6 +427,177 @@ int rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port, uint8_t tc_num, uint8_t *bw_weight); + +/** + * Initialize bypass logic. This function needs to be called before + * executing any other bypass API. + * + * @param port + * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_init(uint8_t port); + +/** + * Return bypass state. + * + * @param port + * The port identifier of the Ethernet device. + * @param state + * The return bypass state. + * - (1) Normal mode + * - (2) Bypass mode + * - (3) Isolate mode + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_state_show(uint8_t port, uint32_t *state); + +/** + * Set bypass state + * + * @param port + * The port identifier of the Ethernet device. + * @param new_state + * The current bypass state. + * - (1) Normal mode + * - (2) Bypass mode + * - (3) Isolate mode + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_state_set(uint8_t port, uint32_t *new_state); + +/** + * Return bypass state when given event occurs. + * + * @param port + * The port identifier of the Ethernet device. + * @param event + * The bypass event + * - (1) Main power on (power button is pushed) + * - (2) Auxiliary power on (power supply is being plugged) + * - (3) Main power off (system shutdown and power supply is left plugged in) + * - (4) Auxiliary power off (power supply is being unplugged) + * - (5) Display or set the watchdog timer + * @param state + * The bypass state when given event occurred. + * - (1) Normal mode + * - (2) Bypass mode + * - (3) Isolate mode + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_event_show(uint8_t port, + uint32_t event, + uint32_t *state); + +/** + * Set bypass state when given event occurs. + * + * @param port + * The port identifier of the Ethernet device. + * @param event + * The bypass event + * - (1) Main power on (power button is pushed) + * - (2) Auxiliary power on (power supply is being plugged) + * - (3) Main power off (system shutdown and power supply is left plugged in) + * - (4) Auxiliary power off (power supply is being unplugged) + * - (5) Display or set the watchdog timer + * @param state + * The assigned state when given event occurs. + * - (1) Normal mode + * - (2) Bypass mode + * - (3) Isolate mode + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_event_store(uint8_t port, + uint32_t event, + uint32_t state); + +/** + * Set bypass watchdog timeout count. + * + * @param port + * The port identifier of the Ethernet device. + * @param timeout + * The timeout to be set. + * - (0) 0 seconds (timer is off) + * - (1) 1.5 seconds + * - (2) 2 seconds + * - (3) 3 seconds + * - (4) 4 seconds + * - (5) 8 seconds + * - (6) 16 seconds + * - (7) 32 seconds + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_wd_timeout_store(uint8_t port, uint32_t timeout); + +/** + * Get bypass firmware version. + * + * @param port + * The port identifier of the Ethernet device. + * @param ver + * The firmware version + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_ver_show(uint8_t port, uint32_t *ver); + +/** + * Return bypass watchdog timeout in seconds + * + * @param port + * The port identifier of the Ethernet device. + * @param wd_timeout + * The return watchdog timeout. "0" represents timer expired + * - (0) 0 seconds (timer is off) + * - (1) 1.5 seconds + * - (2) 2 seconds + * - (3) 3 seconds + * - (4) 4 seconds + * - (5) 8 seconds + * - (6) 16 seconds + * - (7) 32 seconds + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout); + +/** + * Reset bypass watchdog timer + * + * @param port + * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_wd_reset(uint8_t port); + + /** * Response sent back to ixgbe driver from user app after callback */ @@ -446,4 +617,48 @@ struct rte_pmd_ixgbe_mb_event_param { uint16_t retval; /**< return value */ void *msg; /**< pointer to message */ }; +enum { + RTE_PMD_IXGBE_BYPASS_MODE_NONE, + RTE_PMD_IXGBE_BYPASS_MODE_NORMAL, + RTE_PMD_IXGBE_BYPASS_MODE_BYPASS, + RTE_PMD_IXGBE_BYPASS_MODE_ISOLATE, + RTE_PMD_IXGBE_BYPASS_MODE_NUM, +}; + +#define RTE_PMD_IXGBE_BYPASS_MODE_VALID(x) \ + ((x) > RTE_PMD_IXGBE_BYPASS_MODE_NONE && \ + (x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM) + +enum { + RTE_PMD_IXGBE_BYPASS_EVENT_NONE, + RTE_PMD_IXGBE_BYPASS_EVENT_START, + RTE_PMD_IXGBE_BYPASS_EVENT_OS_ON = RTE_PMD_IXGBE_BYPASS_EVENT_START, + RTE_PMD_IXGBE_BYPASS_EVENT_POWER_ON, + RTE_PMD_IXGBE_BYPASS_EVENT_OS_OFF, + RTE_PMD_IXGBE_BYPASS_EVENT_POWER_OFF, + RTE_PMD_IXGBE_BYPASS_EVENT_TIMEOUT, + RTE_PMD_IXGBE_BYPASS_EVENT_NUM +}; + +#define RTE_PMD_IXGBE_BYPASS_EVENT_VALID(x) \ + ((x) > RTE_PMD_IXGBE_BYPASS_EVENT_NONE && \ + (x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM) + +enum { + RTE_PMD_IXGBE_BYPASS_TMT_OFF, /* timeout disabled. */ + RTE_PMD_IXGBE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */ + RTE_PMD_IXGBE_BYPASS_TMT_2_SEC, /* timeout for 2 seconds */ + RTE_PMD_IXGBE_BYPASS_TMT_3_SEC, /* timeout for 3 seconds */ + RTE_PMD_IXGBE_BYPASS_TMT_4_SEC, /* timeout for 4 seconds */ + RTE_PMD_IXGBE_BYPASS_TMT_8_SEC, /* timeout for 8 seconds */ + RTE_PMD_IXGBE_BYPASS_TMT_16_SEC, /* timeout for 16 seconds */ + RTE_PMD_IXGBE_BYPASS_TMT_32_SEC, /* timeout for 32 seconds */ + RTE_PMD_IXGBE_BYPASS_TMT_NUM +}; + +#define RTE_PMD_IXGBE_BYPASS_TMT_VALID(x) \ + ((x) == RTE_PMD_IXGBE_BYPASS_TMT_OFF || \ + ((x) > RTE_PMD_IXGBE_BYPASS_TMT_OFF && \ + (x) < RTE_PMD_IXGBE_BYPASS_TMT_NUM)) + #endif /* _PMD_IXGBE_H_ */ diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe_version.map b/drivers/net/ixgbe/rte_pmd_ixgbe_version.map index 45a57e3354..bf776742ce 100644 --- a/drivers/net/ixgbe/rte_pmd_ixgbe_version.map +++ b/drivers/net/ixgbe/rte_pmd_ixgbe_version.map @@ -38,3 +38,17 @@ DPDK_17.05 { rte_pmd_ixgbe_ping_vf; rte_pmd_ixgbe_set_tc_bw_alloc; } DPDK_17.02; + +DPDK_17.08 { + global: + + rte_pmd_ixgbe_bypass_event_show; + rte_pmd_ixgbe_bypass_event_store; + rte_pmd_ixgbe_bypass_init; + rte_pmd_ixgbe_bypass_state_set; + rte_pmd_ixgbe_bypass_state_show; + rte_pmd_ixgbe_bypass_ver_show; + rte_pmd_ixgbe_bypass_wd_reset; + rte_pmd_ixgbe_bypass_wd_timeout_show; + rte_pmd_ixgbe_bypass_wd_timeout_store; +} DPDK_17.05; diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c index 64aefdd2c4..9227ecc7a0 100644 --- a/lib/librte_ether/rte_ethdev.c +++ b/lib/librte_ether/rte_ethdev.c @@ -2871,128 +2871,6 @@ rte_eth_dev_rx_intr_disable(uint8_t port_id, return (*dev->dev_ops->rx_queue_intr_disable)(dev, queue_id); } -#ifdef RTE_NIC_BYPASS -int rte_eth_dev_bypass_init(uint8_t port_id) -{ - struct rte_eth_dev *dev; - - RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); - - dev = &rte_eth_devices[port_id]; - RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_init, -ENOTSUP); - (*dev->dev_ops->bypass_init)(dev); - return 0; -} - -int -rte_eth_dev_bypass_state_show(uint8_t port_id, uint32_t *state) -{ - struct rte_eth_dev *dev; - - RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); - - dev = &rte_eth_devices[port_id]; - RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_state_show, -ENOTSUP); - (*dev->dev_ops->bypass_state_show)(dev, state); - return 0; -} - -int -rte_eth_dev_bypass_state_set(uint8_t port_id, uint32_t *new_state) -{ - struct rte_eth_dev *dev; - - RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); - - dev = &rte_eth_devices[port_id]; - RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_state_set, -ENOTSUP); - (*dev->dev_ops->bypass_state_set)(dev, new_state); - return 0; -} - -int -rte_eth_dev_bypass_event_show(uint8_t port_id, uint32_t event, uint32_t *state) -{ - struct rte_eth_dev *dev; - - RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); - - dev = &rte_eth_devices[port_id]; - RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_state_show, -ENOTSUP); - (*dev->dev_ops->bypass_event_show)(dev, event, state); - return 0; -} - -int -rte_eth_dev_bypass_event_store(uint8_t port_id, uint32_t event, uint32_t state) -{ - struct rte_eth_dev *dev; - - RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); - - dev = &rte_eth_devices[port_id]; - - RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_event_set, -ENOTSUP); - (*dev->dev_ops->bypass_event_set)(dev, event, state); - return 0; -} - -int -rte_eth_dev_wd_timeout_store(uint8_t port_id, uint32_t timeout) -{ - struct rte_eth_dev *dev; - - RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); - - dev = &rte_eth_devices[port_id]; - - RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_wd_timeout_set, -ENOTSUP); - (*dev->dev_ops->bypass_wd_timeout_set)(dev, timeout); - return 0; -} - -int -rte_eth_dev_bypass_ver_show(uint8_t port_id, uint32_t *ver) -{ - struct rte_eth_dev *dev; - - RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); - - dev = &rte_eth_devices[port_id]; - - RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_ver_show, -ENOTSUP); - (*dev->dev_ops->bypass_ver_show)(dev, ver); - return 0; -} - -int -rte_eth_dev_bypass_wd_timeout_show(uint8_t port_id, uint32_t *wd_timeout) -{ - struct rte_eth_dev *dev; - - RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); - - dev = &rte_eth_devices[port_id]; - - RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_wd_timeout_show, -ENOTSUP); - (*dev->dev_ops->bypass_wd_timeout_show)(dev, wd_timeout); - return 0; -} - -int -rte_eth_dev_bypass_wd_reset(uint8_t port_id) -{ - struct rte_eth_dev *dev; - - RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); - - dev = &rte_eth_devices[port_id]; - - RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_wd_reset, -ENOTSUP); - (*dev->dev_ops->bypass_wd_reset)(dev); - return 0; -} -#endif int rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type) diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h index d118c05b91..b0d2353dc9 100644 --- a/lib/librte_ether/rte_ethdev.h +++ b/lib/librte_ether/rte_ethdev.h @@ -1383,59 +1383,6 @@ typedef int (*eth_l2_tunnel_offload_set_t) uint8_t en); /**< @internal enable/disable the l2 tunnel offload functions */ -#ifdef RTE_NIC_BYPASS - -enum { - RTE_BYPASS_MODE_NONE, - RTE_BYPASS_MODE_NORMAL, - RTE_BYPASS_MODE_BYPASS, - RTE_BYPASS_MODE_ISOLATE, - RTE_BYPASS_MODE_NUM, -}; - -#define RTE_BYPASS_MODE_VALID(x) \ - ((x) > RTE_BYPASS_MODE_NONE && (x) < RTE_BYPASS_MODE_NUM) - -enum { - RTE_BYPASS_EVENT_NONE, - RTE_BYPASS_EVENT_START, - RTE_BYPASS_EVENT_OS_ON = RTE_BYPASS_EVENT_START, - RTE_BYPASS_EVENT_POWER_ON, - RTE_BYPASS_EVENT_OS_OFF, - RTE_BYPASS_EVENT_POWER_OFF, - RTE_BYPASS_EVENT_TIMEOUT, - RTE_BYPASS_EVENT_NUM -}; - -#define RTE_BYPASS_EVENT_VALID(x) \ - ((x) > RTE_BYPASS_EVENT_NONE && (x) < RTE_BYPASS_MODE_NUM) - -enum { - RTE_BYPASS_TMT_OFF, /* timeout disabled. */ - RTE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */ - RTE_BYPASS_TMT_2_SEC, /* timeout for 2 seconds */ - RTE_BYPASS_TMT_3_SEC, /* timeout for 3 seconds */ - RTE_BYPASS_TMT_4_SEC, /* timeout for 4 seconds */ - RTE_BYPASS_TMT_8_SEC, /* timeout for 8 seconds */ - RTE_BYPASS_TMT_16_SEC, /* timeout for 16 seconds */ - RTE_BYPASS_TMT_32_SEC, /* timeout for 32 seconds */ - RTE_BYPASS_TMT_NUM -}; - -#define RTE_BYPASS_TMT_VALID(x) \ - ((x) == RTE_BYPASS_TMT_OFF || \ - ((x) > RTE_BYPASS_TMT_OFF && (x) < RTE_BYPASS_TMT_NUM)) - -typedef void (*bypass_init_t)(struct rte_eth_dev *dev); -typedef int32_t (*bypass_state_set_t)(struct rte_eth_dev *dev, uint32_t *new_state); -typedef int32_t (*bypass_state_show_t)(struct rte_eth_dev *dev, uint32_t *state); -typedef int32_t (*bypass_event_set_t)(struct rte_eth_dev *dev, uint32_t state, uint32_t event); -typedef int32_t (*bypass_event_show_t)(struct rte_eth_dev *dev, uint32_t event_shift, uint32_t *event); -typedef int32_t (*bypass_wd_timeout_set_t)(struct rte_eth_dev *dev, uint32_t timeout); -typedef int32_t (*bypass_wd_timeout_show_t)(struct rte_eth_dev *dev, uint32_t *wd_timeout); -typedef int32_t (*bypass_ver_show_t)(struct rte_eth_dev *dev, uint32_t *ver); -typedef int32_t (*bypass_wd_reset_t)(struct rte_eth_dev *dev); -#endif typedef int (*eth_filter_ctrl_t)(struct rte_eth_dev *dev, enum rte_filter_type filter_type, @@ -1542,18 +1489,6 @@ struct eth_dev_ops { eth_get_eeprom_t get_eeprom; /**< Get eeprom data. */ eth_set_eeprom_t set_eeprom; /**< Set eeprom. */ - /* bypass control */ -#ifdef RTE_NIC_BYPASS - bypass_init_t bypass_init; - bypass_state_set_t bypass_state_set; - bypass_state_show_t bypass_state_show; - bypass_event_set_t bypass_event_set; - bypass_event_show_t bypass_event_show; - bypass_wd_timeout_set_t bypass_wd_timeout_set; - bypass_wd_timeout_show_t bypass_wd_timeout_show; - bypass_ver_show_t bypass_ver_show; - bypass_wd_reset_t bypass_wd_reset; -#endif eth_filter_ctrl_t filter_ctrl; /**< common filter control. */ @@ -3829,171 +3764,6 @@ int rte_eth_mirror_rule_reset(uint8_t port_id, int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx, uint16_t tx_rate); -/** - * Initialize bypass logic. This function needs to be called before - * executing any other bypass API. - * - * @param port - * The port identifier of the Ethernet device. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_init(uint8_t port); - -/** - * Return bypass state. - * - * @param port - * The port identifier of the Ethernet device. - * @param state - * The return bypass state. - * - (1) Normal mode - * - (2) Bypass mode - * - (3) Isolate mode - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_state_show(uint8_t port, uint32_t *state); - -/** - * Set bypass state - * - * @param port - * The port identifier of the Ethernet device. - * @param new_state - * The current bypass state. - * - (1) Normal mode - * - (2) Bypass mode - * - (3) Isolate mode - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_state_set(uint8_t port, uint32_t *new_state); - -/** - * Return bypass state when given event occurs. - * - * @param port - * The port identifier of the Ethernet device. - * @param event - * The bypass event - * - (1) Main power on (power button is pushed) - * - (2) Auxiliary power on (power supply is being plugged) - * - (3) Main power off (system shutdown and power supply is left plugged in) - * - (4) Auxiliary power off (power supply is being unplugged) - * - (5) Display or set the watchdog timer - * @param state - * The bypass state when given event occurred. - * - (1) Normal mode - * - (2) Bypass mode - * - (3) Isolate mode - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_event_show(uint8_t port, uint32_t event, uint32_t *state); - -/** - * Set bypass state when given event occurs. - * - * @param port - * The port identifier of the Ethernet device. - * @param event - * The bypass event - * - (1) Main power on (power button is pushed) - * - (2) Auxiliary power on (power supply is being plugged) - * - (3) Main power off (system shutdown and power supply is left plugged in) - * - (4) Auxiliary power off (power supply is being unplugged) - * - (5) Display or set the watchdog timer - * @param state - * The assigned state when given event occurs. - * - (1) Normal mode - * - (2) Bypass mode - * - (3) Isolate mode - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_event_store(uint8_t port, uint32_t event, uint32_t state); - -/** - * Set bypass watchdog timeout count. - * - * @param port - * The port identifier of the Ethernet device. - * @param timeout - * The timeout to be set. - * - (0) 0 seconds (timer is off) - * - (1) 1.5 seconds - * - (2) 2 seconds - * - (3) 3 seconds - * - (4) 4 seconds - * - (5) 8 seconds - * - (6) 16 seconds - * - (7) 32 seconds - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_wd_timeout_store(uint8_t port, uint32_t timeout); - -/** - * Get bypass firmware version. - * - * @param port - * The port identifier of the Ethernet device. - * @param ver - * The firmware version - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_ver_show(uint8_t port, uint32_t *ver); - -/** - * Return bypass watchdog timeout in seconds - * - * @param port - * The port identifier of the Ethernet device. - * @param wd_timeout - * The return watchdog timeout. "0" represents timer expired - * - (0) 0 seconds (timer is off) - * - (1) 1.5 seconds - * - (2) 2 seconds - * - (3) 3 seconds - * - (4) 4 seconds - * - (5) 8 seconds - * - (6) 16 seconds - * - (7) 32 seconds - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout); - -/** - * Reset bypass watchdog timer - * - * @param port - * The port identifier of the Ethernet device. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_wd_reset(uint8_t port); - /** * Configuration of Receive Side Scaling hash computation of Ethernet device. * diff --git a/lib/librte_ether/rte_ether_version.map b/lib/librte_ether/rte_ether_version.map index d6726bb1b7..1d22434ed5 100644 --- a/lib/librte_ether/rte_ether_version.map +++ b/lib/librte_ether/rte_ether_version.map @@ -10,14 +10,6 @@ DPDK_2.2 { rte_eth_dev_allocate; rte_eth_dev_allocated; rte_eth_dev_attach; - rte_eth_dev_bypass_event_show; - rte_eth_dev_bypass_event_store; - rte_eth_dev_bypass_init; - rte_eth_dev_bypass_state_set; - rte_eth_dev_bypass_state_show; - rte_eth_dev_bypass_ver_show; - rte_eth_dev_bypass_wd_reset; - rte_eth_dev_bypass_wd_timeout_show; rte_eth_dev_callback_register; rte_eth_dev_callback_unregister; rte_eth_dev_close; @@ -70,7 +62,6 @@ DPDK_2.2 { rte_eth_dev_uc_all_hash_table_set; rte_eth_dev_uc_hash_table_set; rte_eth_dev_vlan_filter; - rte_eth_dev_wd_timeout_store; rte_eth_dma_zone_reserve; rte_eth_led_off; rte_eth_led_on;