From 205d9d3cf8a8d6fa7a79b399315c61df859dd01d Mon Sep 17 00:00:00 2001 From: Dekel Peled Date: Sun, 31 Mar 2019 13:20:55 +0300 Subject: [PATCH] doc: fix typos in testpmd user guide Correct typing mistakes in several places. 1) "Those command will" ==> "These commands will" 2) icmp6_nd_opt_sla_eth ==> icmp6_nd_opt_tla_eth (change 's' to 't' for 'target' where applicable) Fixes: 1960be7d32f8 ("app/testpmd: add VXLAN encap/decap") Cc: stable@dpdk.org Signed-off-by: Dekel Peled Acked-by: Bernard Iremonger --- doc/guides/testpmd_app_ug/testpmd_funcs.rst | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst index 06c8b2ac01..bcf1449a2c 100644 --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst @@ -1623,7 +1623,7 @@ Configure the outer layer to encapsulate a packet inside a VXLAN tunnel:: udp-dst (udp-dst) ip-tos (ip-tos) ip-ttl (ip-ttl) ip-src (ip-src) \ ip-dst (ip-dst) eth-src (eth-src) eth-dst (eth-dst) -Those command will set an internal configuration inside testpmd, any following +These commands will set an internal configuration inside testpmd, any following flow rule using the action vxlan_encap will use the last configuration set. To have a different encapsulation header, one of those commands must be called before the flow rule creation. @@ -1638,7 +1638,7 @@ Configure the outer layer to encapsulate a packet inside a NVGRE tunnel:: set nvgre-with-vlan ip-version (ipv4|ipv6) tni (tni) ip-src (ip-src) \ ip-dst (ip-dst) vlan-tci (vlan-tci) eth-src (eth-src) eth-dst (eth-dst) -Those command will set an internal configuration inside testpmd, any following +These commands will set an internal configuration inside testpmd, any following flow rule using the action nvgre_encap will use the last configuration set. To have a different encapsulation header, one of those commands must be called before the flow rule creation. @@ -1681,7 +1681,7 @@ Configure the outer layer to encapsulate a packet inside a MPLSoGRE tunnel:: ip-src (ip-src) ip-dst (ip-dst) vlan-tci (vlan-tci) \ eth-src (eth-src) eth-dst (eth-dst) -Those command will set an internal configuration inside testpmd, any following +These commands will set an internal configuration inside testpmd, any following flow rule using the action mplsogre_encap will use the last configuration set. To have a different encapsulation header, one of those commands must be called before the flow rule creation. @@ -1694,7 +1694,7 @@ Configure the outer layer to decapsulate MPLSoGRE packet:: set mplsogre_decap ip-version (ipv4|ipv6) set mplsogre_decap-with-vlan ip-version (ipv4|ipv6) -Those command will set an internal configuration inside testpmd, any following +These commands will set an internal configuration inside testpmd, any following flow rule using the action mplsogre_decap will use the last configuration set. To have a different decapsulation header, one of those commands must be called before the flow rule creation. @@ -1711,7 +1711,7 @@ Configure the outer layer to encapsulate a packet inside a MPLSoUDP tunnel:: udp-src (udp-src) udp-dst (udp-dst) ip-src (ip-src) ip-dst (ip-dst) \ vlan-tci (vlan-tci) eth-src (eth-src) eth-dst (eth-dst) -Those command will set an internal configuration inside testpmd, any following +These commands will set an internal configuration inside testpmd, any following flow rule using the action mplsoudp_encap will use the last configuration set. To have a different encapsulation header, one of those commands must be called before the flow rule creation. @@ -1724,7 +1724,7 @@ Configure the outer layer to decapsulate MPLSoUDP packet:: set mplsoudp_decap ip-version (ipv4|ipv6) set mplsoudp_decap-with-vlan ip-version (ipv4|ipv6) -Those command will set an internal configuration inside testpmd, any following +These commands will set an internal configuration inside testpmd, any following flow rule using the action mplsoudp_decap will use the last configuration set. To have a different decapsulation header, one of those commands must be called before the flow rule creation. @@ -3745,7 +3745,7 @@ This section lists supported pattern items and their attributes, if any. - ``sla {MAC-48}``: source Ethernet LLA. -- ``icmp6_nd_opt_sla_eth``: match ICMPv6 neighbor discovery target Ethernet +- ``icmp6_nd_opt_tla_eth``: match ICMPv6 neighbor discovery target Ethernet link-layer address option. - ``tla {MAC-48}``: target Ethernet LLA. -- 2.20.1