From 3ff4b0866fe22840994be631e552c9420204fc1e Mon Sep 17 00:00:00 2001 From: Adrien Mazarguil Date: Tue, 10 Jul 2018 18:04:44 +0200 Subject: [PATCH] net/mlx5: remove redundant objects in probe function This patch gets rid of redundant calls to open the device and query its attributes in order to simplify the code. Signed-off-by: Adrien Mazarguil Reviewed-by: Xueming Li --- drivers/net/mlx5/mlx5.c | 64 +++++++++++++++++++---------------------- 1 file changed, 30 insertions(+), 34 deletions(-) diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index 99a79348e5..5523440110 100644 --- a/drivers/net/mlx5/mlx5.c +++ b/drivers/net/mlx5/mlx5.c @@ -654,10 +654,10 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, { struct ibv_device **list = NULL; struct ibv_device *ibv_dev; + struct ibv_context *ctx = NULL; + struct ibv_device_attr_ex attr; struct mlx5dv_context dv_attr = { .comp_mask = 0 }; int err = 0; - struct ibv_context *attr_ctx = NULL; - struct ibv_device_attr_ex device_attr; unsigned int vf = 0; unsigned int mps; unsigned int cqe_comp; @@ -714,12 +714,12 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, PCI_DEVICE_ID_MELLANOX_CONNECTX5VF) || (pci_dev->id.device_id == PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF)); - attr_ctx = mlx5_glue->open_device(list[i]); + ctx = mlx5_glue->open_device(list[i]); rte_errno = errno; err = rte_errno; break; } - if (attr_ctx == NULL) { + if (ctx == NULL) { switch (err) { case 0: DRV_LOG(ERR, @@ -748,7 +748,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, #ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_STRIDING_RQ; #endif - mlx5_glue->dv_query_device(attr_ctx, &dv_attr); + mlx5_glue->dv_query_device(ctx, &dv_attr); if (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED) { if (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW) { DRV_LOG(DEBUG, "enhanced MPW is supported"); @@ -822,23 +822,20 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, DRV_LOG(WARNING, "MPLS over GRE/UDP tunnel offloading disabled due to" " old OFED/rdma-core version or firmware configuration"); #endif - err = mlx5_glue->query_device_ex(attr_ctx, NULL, &device_attr); + err = mlx5_glue->query_device_ex(ctx, NULL, &attr); if (err) { DEBUG("ibv_query_device_ex() failed"); goto error; } - DRV_LOG(INFO, "%u port(s) detected", - device_attr.orig_attr.phys_port_cnt); - for (i = 0; i < device_attr.orig_attr.phys_port_cnt; i++) { + DRV_LOG(INFO, "%u port(s) detected", attr.orig_attr.phys_port_cnt); + for (i = 0; i < attr.orig_attr.phys_port_cnt; i++) { char name[RTE_ETH_NAME_MAX_LEN]; int len; uint32_t port = i + 1; /* ports are indexed from one */ - struct ibv_context *ctx = NULL; struct ibv_port_attr port_attr; struct ibv_pd *pd = NULL; struct priv *priv = NULL; struct rte_eth_dev *eth_dev = NULL; - struct ibv_device_attr_ex device_attr_ex; struct ether_addr mac; struct mlx5_dev_config config = { .cqe_comp = cqe_comp, @@ -865,7 +862,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, len = snprintf(name, sizeof(name), PCI_PRI_FMT, pci_dev->addr.domain, pci_dev->addr.bus, pci_dev->addr.devid, pci_dev->addr.function); - if (device_attr.orig_attr.phys_port_cnt > 1) + if (attr.orig_attr.phys_port_cnt > 1) snprintf(name + len, sizeof(name), " port %u", i); if (rte_eal_process_type() == RTE_PROC_SECONDARY) { eth_dev = rte_eth_dev_attach_secondary(name); @@ -907,7 +904,8 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, continue; } DRV_LOG(DEBUG, "using port %u", port); - ctx = mlx5_glue->open_device(ibv_dev); + if (!ctx) + ctx = mlx5_glue->open_device(ibv_dev); if (ctx == NULL) { err = ENODEV; goto port_error; @@ -949,7 +947,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, priv->ctx = ctx; strncpy(priv->ibdev_path, priv->ctx->device->ibdev_path, sizeof(priv->ibdev_path)); - priv->device_attr = device_attr; + priv->device_attr = attr; priv->port = port; priv->pd = pd; priv->mtu = ETHER_MTU; @@ -960,17 +958,12 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, strerror(rte_errno)); goto port_error; } - err = mlx5_glue->query_device_ex(ctx, NULL, &device_attr_ex); - if (err) { - DRV_LOG(ERR, "ibv_query_device_ex() failed"); - goto port_error; - } - config.hw_csum = !!(device_attr_ex.device_cap_flags_ex & + config.hw_csum = !!(attr.device_cap_flags_ex & IBV_DEVICE_RAW_IP_CSUM); DRV_LOG(DEBUG, "checksum offloading is %ssupported", (config.hw_csum ? "" : "not ")); #ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT - config.flow_counter_en = !!(device_attr.max_counter_sets); + config.flow_counter_en = !!attr.max_counter_sets; mlx5_glue->describe_counter_set(ctx, 0, &cs_desc); DRV_LOG(DEBUG, "counter type = %d, num of cs = %ld, attributes = %d", @@ -978,7 +971,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, cs_desc.attributes); #endif config.ind_table_max_size = - device_attr_ex.rss_caps.max_rwq_indirection_table_size; + attr.rss_caps.max_rwq_indirection_table_size; /* Remove this check once DPDK supports larger/variable * indirection tables. */ if (config.ind_table_max_size > @@ -986,29 +979,28 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, config.ind_table_max_size = ETH_RSS_RETA_SIZE_512; DRV_LOG(DEBUG, "maximum Rx indirection table size is %u", config.ind_table_max_size); - config.hw_vlan_strip = !!(device_attr_ex.raw_packet_caps & + config.hw_vlan_strip = !!(attr.raw_packet_caps & IBV_RAW_PACKET_CAP_CVLAN_STRIPPING); DRV_LOG(DEBUG, "VLAN stripping is %ssupported", (config.hw_vlan_strip ? "" : "not ")); - config.hw_fcs_strip = !!(device_attr_ex.raw_packet_caps & + config.hw_fcs_strip = !!(attr.raw_packet_caps & IBV_RAW_PACKET_CAP_SCATTER_FCS); DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported", (config.hw_fcs_strip ? "" : "not ")); #ifdef HAVE_IBV_WQ_FLAG_RX_END_PADDING - config.hw_padding = !!device_attr_ex.rx_pad_end_addr_align; + config.hw_padding = !!attr.rx_pad_end_addr_align; #endif DRV_LOG(DEBUG, "hardware Rx end alignment padding is %ssupported", (config.hw_padding ? "" : "not ")); config.vf = vf; - config.tso = ((device_attr_ex.tso_caps.max_tso > 0) && - (device_attr_ex.tso_caps.supported_qpts & - (1 << IBV_QPT_RAW_PACKET))); + config.tso = (attr.tso_caps.max_tso > 0 && + (attr.tso_caps.supported_qpts & + (1 << IBV_QPT_RAW_PACKET))); if (config.tso) - config.tso_max_payload_sz = - device_attr_ex.tso_caps.max_tso; + config.tso_max_payload_sz = attr.tso_caps.max_tso; if (config.mps && !mps) { DRV_LOG(ERR, "multi-packet send not supported on this device" @@ -1170,14 +1162,18 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, priv, mem_event_cb); rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock); rte_eth_dev_probing_finish(eth_dev); + /* + * Each eth_dev instance is assigned its own Verbs context, + * since this one is consumed, let the next iteration open + * another. + */ + ctx = NULL; continue; port_error: if (priv) rte_free(priv); if (pd) claim_zero(mlx5_glue->dealloc_pd(pd)); - if (ctx) - claim_zero(mlx5_glue->close_device(ctx)); if (eth_dev && rte_eal_process_type() == RTE_PROC_PRIMARY) rte_eth_dev_release_port(eth_dev); break; @@ -1189,8 +1185,8 @@ port_error: * way to enumerate the registered ethdevs to free the previous ones. */ error: - if (attr_ctx) - claim_zero(mlx5_glue->close_device(attr_ctx)); + if (ctx) + claim_zero(mlx5_glue->close_device(ctx)); if (list) mlx5_glue->free_device_list(list); if (err) { -- 2.20.1