#
# Automatically generated make config: don't edit
#

#
# Hardware
#
# CONFIG_MCU_AT90S2313 is not set
# CONFIG_MCU_AT90S2323 is not set
# CONFIG_MCU_AT90S3333 is not set
# CONFIG_MCU_AT90S2343 is not set
# CONFIG_MCU_ATTINY22 is not set
# CONFIG_MCU_ATTINY26 is not set
# CONFIG_MCU_AT90S4414 is not set
# CONFIG_MCU_AT90S4433 is not set
# CONFIG_MCU_AT90S4434 is not set
# CONFIG_MCU_AT90S8515 is not set
# CONFIG_MCU_AT90S8534 is not set
# CONFIG_MCU_AT90S8535 is not set
# CONFIG_MCU_AT86RF401 is not set
# CONFIG_MCU_ATMEGA103 is not set
# CONFIG_MCU_ATMEGA603 is not set
# CONFIG_MCU_AT43USB320 is not set
# CONFIG_MCU_AT43USB355 is not set
# CONFIG_MCU_AT76C711 is not set
# CONFIG_MCU_ATMEGA8 is not set
# CONFIG_MCU_ATMEGA48 is not set
# CONFIG_MCU_ATMEGA88 is not set
# CONFIG_MCU_ATMEGA8515 is not set
# CONFIG_MCU_ATMEGA8535 is not set
# CONFIG_MCU_ATTINY13 is not set
# CONFIG_MCU_ATTINY2313 is not set
# CONFIG_MCU_ATMEGA16 is not set
# CONFIG_MCU_ATMEGA161 is not set
# CONFIG_MCU_ATMEGA162 is not set
# CONFIG_MCU_ATMEGA163 is not set
# CONFIG_MCU_ATMEGA165 is not set
# CONFIG_MCU_ATMEGA168 is not set
# CONFIG_MCU_ATMEGA169 is not set
# CONFIG_MCU_ATMEGA32 is not set
# CONFIG_MCU_ATMEGA323 is not set
# CONFIG_MCU_ATMEGA325 is not set
# CONFIG_MCU_ATMEGA3250 is not set
# CONFIG_MCU_ATMEGA64 is not set
# CONFIG_MCU_ATMEGA645 is not set
# CONFIG_MCU_ATMEGA6450 is not set
CONFIG_MCU_ATMEGA128=y
# CONFIG_MCU_AT90CAN128 is not set
# CONFIG_MCU_AT94K is not set
# CONFIG_MCU_AT90S1200 is not set
CONFIG_QUARTZ=12000000

#
# Generation options
#
# CONFIG_OPTM_0 is not set
# CONFIG_OPTM_1 is not set
# CONFIG_OPTM_2 is not set
# CONFIG_OPTM_3 is not set
CONFIG_OPTM_S=y
CONFIG_MATH_LIB=y
# CONFIG_MINIMAL_PRINTF is not set
CONFIG_STANDARD_PRINTF=y
# CONFIG_ADVANCED_PRINTF is not set
CONFIG_FORMAT_IHEX=y
# CONFIG_FORMAT_SREC is not set
# CONFIG_FORMAT_BINARY is not set

#
# Base modules
#

#
# To see all modules here, you must enable utils and wait modules, and math library
#
CONFIG_MODULE_UTILS=y
CONFIG_MODULE_UTILS_CREATE_CONFIG=y
# CONFIG_MODULE_FIXED_POINT is not set
# CONFIG_MODULE_VECT2 is not set
CONFIG_MODULE_WAIT=y
CONFIG_MODULE_LIST=y
CONFIG_MODULE_SCHEDULER=y
CONFIG_MODULE_SCHEDULER_CREATE_CONFIG=y
CONFIG_MODULE_TIME=y
CONFIG_MODULE_TIME_CREATE_CONFIG=y

#
# Communication modules
#

#
# Some communications modules depend on utils and list modules
#
# CONFIG_MODULE_UART is not set
# CONFIG_MODULE_UART_CREATE_CONFIG is not set

#
# Hardware modules
#

#
# Hardware modules depend on utils module
#
# CONFIG_MODULE_PWM is not set
# CONFIG_MODULE_PWM_CREATE_CONFIG is not set

#
# IHM modules
#
# CONFIG_MODULE_MENU is not set

#
# External devices modules
#
# CONFIG_MODULE_LCD is not set
# CONFIG_MODULE_LCD_CREATE_CONFIG is not set
# CONFIG_MODULE_MULTISERVO is not set
# CONFIG_MODULE_MULTISERVO_CREATE_CONFIG is not set

#
# Encoders (you should enable utils and fixed_point modules to see all available encoders)
#
# CONFIG_MODULE_ENCODERS_MICROB is not set
# CONFIG_MODULE_ENCODERS_MICROB_CREATE_CONFIG is not set
# CONFIG_MODULE_ENCODERS_EIRBOT is not set
# CONFIG_MODULE_ENCODERS_EIRBOT_CREATE_CONFIG is not set

#
# Robot specific modules
#
# CONFIG_MODULE_ROBOT_SYSTEM is not set
# CONFIG_MODULE_POSITION_MANAGER is not set

#
# Control system modules
#
# CONFIG_MODULE_CONTROL_SYSTEM_MANAGER is not set

#
# Filters (you should enable utils modules to see all available filters)
#
# CONFIG_MODULE_PID is not set
# CONFIG_MODULE_RAMP is not set
# CONFIG_MODULE_QUADRAMP is not set

#
# Debug modules
#

#
# Debug modules depend on utils module
#
# CONFIG_MODULE_DIAGNOSTIC is not set
# CONFIG_MODULE_DIAGNOSTIC_CREATE_CONFIG is not set
CONFIG_MODULE_ERROR=y
CONFIG_MODULE_ERROR_CREATE_CONFIG=y

#
# Avrdude
#
# CONFIG_AVRDUDE_PROG_FUTURELEC is not set
# CONFIG_AVRDUDE_PROG_ABCMINI is not set
# CONFIG_AVRDUDE_PROG_PICOWEB is not set
# CONFIG_AVRDUDE_PROG_SP12 is not set
# CONFIG_AVRDUDE_PROG_ALF is not set
# CONFIG_AVRDUDE_PROG_BASCOM is not set
# CONFIG_AVRDUDE_PROG_DT006 is not set
# CONFIG_AVRDUDE_PROG_PONY_STK200 is not set
CONFIG_AVRDUDE_PROG_STK200=y
# CONFIG_AVRDUDE_PROG_PAVR is not set
# CONFIG_AVRDUDE_PROG_BUTTERFLY is not set
# CONFIG_AVRDUDE_PROG_AVR910 is not set
# CONFIG_AVRDUDE_PROG_STK500 is not set
# CONFIG_AVRDUDE_PROG_AVRISP is not set
# CONFIG_AVRDUDE_PROG_BSD is not set
CONFIG_AVRDUDE_PORT="/dev/parport0"