INSTALLING DPDK USING THE MESON BUILD SYSTEM --------------------------------------------- NOTE: Compiling and installing DPDK using ``meson`` and ``ninja``, rather than using ``make`` (GNU make) is EXPERIMENTAL. Official builds of DPDK should always be done using ``make``, as described in the ``Getting Started Guide`` documentation, and at "http://dpdk.org/doc/quick-start". Summary -------- For many platforms, compiling and installing DPDK should work using the following set of commands:: meson build cd build ninja ninja install This will compile DPDK in the ``build`` subdirectory, and then install the resulting libraries, drivers and header files onto the system - generally in /usr/local. A package-config file, ``libdpdk.pc``, for DPDK will also be installed to allow ease of compiling and linking with applications. After installation, to use DPDK, the necessary CFLAG and LDFLAG variables can be got from pkg-config:: pkg-config --cflags libdpdk pkg-config --libs libdpdk More detail on each of these steps can be got from the following sections. Getting the Tools ------------------ The ``meson`` tool is used to configure a DPDK build. On most Linux distributions this can be got using the local package management system, e.g. ``dnf install meson`` or ``apt-get install meson``. If meson is not available as a suitable package, it can also be installed using the Python 3 ``pip`` tool, e.g. ``pip3 install meson``. Version 0.42 of meson is recommended - if the version packaged is too old, the latest version is generally available from "pip". The other dependency for building is the ``ninja`` tool, which acts similar to make and performs the actual build using information provided by meson. Installing meson will, in many cases, also install ninja, but, if not already installed, it too is generally packaged by most Linux distributions. If not available as a package, it can be downloaded as source or binary from https://ninja-build.org/ Configuring the Build ---------------------- To configure a build, run the meson tool, passing the path to the directory to be used for the build e.g. ``meson build``, as shown above. If calling meson from somewhere other than the root directory of the DPDK project the path to the root directory should be passed as the first parameter, and the build path as the second. For example, to build DPDK in /tmp/dpdk-build:: user@host:/tmp$ meson ~user/dpdk dpdk-build Meson will then configure the build based on settings in the project's meson.build files, and by checking the build environment for e.g. compiler properties or the presence of dependencies, such as libpcap, or openssl libcrypto libraries. Once done, meson writes a ``build.ninja`` file in the build directory to be used to do the build itself when ninja is called. Tuning of the build is possible, both as part of the original meson call, or subsequently using ``meson configure`` command (``mesonconf`` in some older versions). Some options, such as ``buildtype``, or ``werror`` are built into meson, while others, such as ``max_lcores``, or the list of examples to build, are DPDK-specific. To have a list of all options available run ``meson configure`` in the build directory. Examples of adjusting the defaults when doing initial meson configuration. Project-specific options are passed used -Doption=value:: meson --werror werrorbuild # build with warnings as errors meson --buildtype=debug debugbuild # build for debugging meson -Dexamples=l3fwd,l2fwd fwdbuild # build some examples as # part of the normal DPDK build meson -Dmax_lcores=8 smallbuild # scale build for smaller systems Examples of setting the same options using meson configure:: meson configure -Dwerror=true meson configure -Dbuildtype=debug meson configure -Dexamples=l3fwd,l2fwd meson configure -Dmax_lcores=8 NOTE: once meson has been run to configure a build in a directory, it cannot be run again on the same directory. Instead ``meson configure`` should be used to change the build settings within the directory, and when ``ninja`` is called to do the build itself, it will trigger the necessary re-scan from meson. As well as those settings taken from ``meson configure``, other options such as the compiler to use can be passed via environment variables. For example:: CC=clang meson clang-build NOTE: for more comprehensive overriding of compilers or other environment settings, the tools for cross-compilation may be considered. However, for basic overriding of the compiler etc., the above form works as expected. Performing the Build --------------------- Use ``ninja`` to perform the actual build inside the build folder previously configured. In most cases no arguments are necessary. Ninja accepts a number of flags which are similar to make. For example, to call ninja from outside the build folder, you can use ``ninja -C build``. Ninja also runs parallel builds by default, but you can limit this using the ``-j`` flag, e.g. ``ninja -j1 -v`` to do the build one step at a time, printing each command on a new line as it runs. Installing the Compiled Files ------------------------------ Use ``ninja install`` to install the required DPDK files onto the system. The install prefix defaults to ``/usr/local`` but can be used as with other options above. The environment variable ``DEST_DIR`` can be used to adjust the root directory for the install, for example when packaging. With the base install directory, the individual directories for libraries and headers are configurable. By default, the following will be the installed layout:: headers -> /usr/local/include libraries -> /usr/local/lib64 drivers -> /usr/local/lib64/dpdk/drivers libdpdk.pc -> /usr/local/lib64/pkgconfig For the drivers, these will also be symbolically linked into the library install directory, so that ld.so can find them in cases where one driver may depend on another, e.g. a NIC PMD depending upon the PCI bus driver. Within the EAL, the default search path for drivers will be set to the configured driver install path, so dynamically-linked applications can be run without having to pass in ``-d /path/to/driver`` options for standard drivers. Cross Compiling DPDK -------------------- To cross-compile DPDK on a desired target machine we can use the following command:: meson cross-build --cross-file For example if the target machine is arm64 we can use the following command:: meson arm-build --cross-file config/arm/arm64_armv8_linuxapp_gcc where config/arm/arm64_armv8_linuxapp_gcc contains the following parameters:: [binaries] c = 'aarch64-linux-gnu-gcc' cpp = 'aarch64-linux-gnu-cpp' ar = 'aarch64-linux-gnu-ar' [host_machine] system = 'linux' cpu_family = 'aarch64' cpu = 'armv8-a' endian = 'little' Using the DPDK within an Application ------------------------------------- To compile and link against DPDK within an application, pkg-config should be used to query the correct parameters. Examples of this are given in the makefiles for the example applications included with DPDK. They demonstrate how to link either against the DPDK shared libraries, or against the static versions of the same. From examples/helloworld/Makefile:: PC_FILE := $(shell pkg-config --path libdpdk) CFLAGS += -O3 $(shell pkg-config --cflags libdpdk) LDFLAGS_SHARED = $(shell pkg-config --libs libdpdk) LDFLAGS_STATIC = -Wl,-Bstatic $(shell pkg-config --static --libs libdpdk) build/$(APP)-shared: $(SRCS-y) Makefile $(PC_FILE) | build $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_SHARED) build/$(APP)-static: $(SRCS-y) Makefile $(PC_FILE) | build $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_STATIC) build: @mkdir -p $@