DPDK Release 17.05 ================== .. **Read this first.** The text in the sections below explains how to update the release notes. Use proper spelling, capitalization and punctuation in all sections. Variable and config names should be quoted as fixed width text: ``LIKE_THIS``. Build the docs and view the output file to ensure the changes are correct:: make doc-guides-html xdg-open build/doc/html/guides/rel_notes/release_17_05.html New Features ------------ .. This section should contain new features added in this release. Sample format: * **Add a title in the past tense with a full stop.** Add a short 1-2 sentence description in the past tense. The description should be enough to allow someone scanning the release notes to understand the new feature. If the feature adds a lot of sub-features you can use a bullet list like this: * Added feature foo to do something. * Enhanced feature bar to do something else. Refer to the previous release notes for examples. This section is a comment. do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * **Added free Tx mbuf on demand API.** Added a new function ``rte_eth_tx_done_cleanup()`` which allows an application to request the driver to release mbufs from their Tx ring that are no longer in use, independent of whether or not the ``tx_rs_thresh`` has been crossed. * **Added descriptor status ethdev API.** Added a new API to get the status of a descriptor. For Rx, it is almost similar to the ``rx_descriptor_done`` API, except it differentiates descriptors which are hold by the driver and not returned to the hardware. For Tx, it is a new API. * **Increased number of next hops for LPM IPv6 to 2^21.** The next_hop field is extended from 8 bits to 21 bits for IPv6. * **Added VFIO hotplug support.** How hotplug supported with UIO and VFIO drivers. * **Added powerpc support in pci probing for vfio-pci devices.** sPAPR IOMMU based pci probing enabled for vfio-pci devices. * **Kept consistent PMD batching behaviour.** Removed the limit of fm10k/i40e/ixgbe TX burst size and vhost RX/TX burst size in order to support the same policy of "make an best effort to RX/TX pkts" for PMDs. * **Updated the ixgbe base driver.** Updated the ixgbe base driver, including the following changes: * Add link block check for KR. * Complete HW initialization even if SFP is not present. * Add VF xcast promiscuous mode. * **Added powerpc support for i40e and its vector PMD .** i40e PMD and its vector PMD enabled by default in powerpc. * **Added VF max bandwidth setting on i40e.** i40e HW supports to set the max bandwidth for a VF. Enable this capability. * **Added VF TC min bandwidth setting on i40e.** i40e HW supports to set the allocated bandwidth for a TC on a VF. Enable this capability. * **Added VF TC max bandwidth setting on i40e.** i40e HW supports to set the max bandwidth for a TC on a VF. Enable this capability. * **Added TC strict priority mode setting on i40e.** There're 2 TX scheduling modes supported for TCs by i40e HW, round ribon mode and strict priority mode. By default it's round robin mode. Enable the capability to change the TX scheduling mode for a TC. It's a global setting on a physical port. * **Added i40e dynamic device personalization support.** * Added dynamic device personalization processing to i40e FW. * **Added TSO support for tunneled and non-tunneled packets on mlx5 driver.** Added support for Hardware TSO for tunneled and non-tunneled packets. Tunneling protocols supported are GRE and VXLAN. * **Added support for Rx interrupts on mlx5 driver.** Rx queues can be armed with an interrupt which will trigger on the next packet arrival. * **Updated the sfc_efx driver.** * Generic flow API support for Ethernet, VLAN, IPv4, IPv6, UDP and TCP pattern items with QUEUE action for ingress traffic. * Support virtual functions (VFs) * **Added LiquidIO network PMD.** Added poll mode driver support for Cavium LiquidIO II server adapter VFs. * **Added support for the Wind River Systems AVP PMD.** Added a new networking driver for the AVP device type. Theses devices are specific to the Wind River Systems virtualization platforms. * **Added vmxnet3 version 3 support.** Added support for vmxnet3 version 3 which includes several performance enhancements viz. configurable TX data ring, Receive Data Ring, ability to register memory regions. * **Updated the tap driver.** * Support MTU modification. * Support packet type for Rx. * Support segmented packets on Rx and Tx. * Speed up Rx on tap when no packets are available. * Support capturing traffic from another netdevice. * Dynamically change link status when the underlying interface state changes. * Generic flow API support for Ethernet, VLAN, IPv4, IPv6, UDP and TCP pattern items with DROP, QUEUE and PASSTHRU actions for ingress traffic. * **Added MTU feature support to Virtio and Vhost.** Implemented new Virtio MTU feature into Vhost and Virtio: * Add ``rte_vhost_mtu_get()`` API to Vhost library. * Enable Vhost PMD's MTU get feature. * Get max MTU value from host in Virtio PMD * **Added interrupt mode support for virtio-user.** Implemented Rxq interrupt mode and LSC support for virtio-user as a virtual device. Supported cases: * Rxq interrupt for virtio-user + vhost-user as the backend. * Rxq interrupt for virtio-user + vhost-kernel as the backend. * LSC interrupt for virtio-user + vhost-user as the backend. Resolved Issues --------------- .. This section should contain bug fixes added to the relevant sections. Sample format: * **code/section Fixed issue in the past tense with a full stop.** Add a short 1-2 sentence description of the resolved issue in the past tense. The title should contain the code/lib section like a commit message. Add the entries in alphabetic order in the relevant sections below. This section is a comment. do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= EAL ~~~ Drivers ~~~~~~~ Libraries ~~~~~~~~~ Examples ~~~~~~~~ Other ~~~~~ Known Issues ------------ .. This section should contain new known issues in this release. Sample format: * **Add title in present tense with full stop.** Add a short 1-2 sentence description of the known issue in the present tense. Add information on any known workarounds. This section is a comment. do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * **LSC interrupt cannot work for virtio-user + vhost-kernel.** LSC interrupt cannot be detected when setting the backend, tap device, up/down as we fail to find a way to monitor such event. API Changes ----------- .. This section should contain API changes. Sample format: * Add a short 1-2 sentence description of the API change. Use fixed width quotes for ``rte_function_names`` or ``rte_struct_names``. Use the past tense. This section is a comment. do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * The LPM ``next_hop`` field is extended from 8 bits to 21 bits for IPv6 while keeping ABI compatibility. * **Reworked rte_ring library** The rte_ring library has been reworked and updated. The following changes have been made to it: * removed the build-time setting ``CONFIG_RTE_RING_SPLIT_PROD_CONS`` * removed the build-time setting ``CONFIG_RTE_LIBRTE_RING_DEBUG`` * removed the build-time setting ``CONFIG_RTE_RING_PAUSE_REP_COUNT`` * removed the function ``rte_ring_set_water_mark`` as part of a general removal of watermarks support in the library. * added an extra parameter to the burst/bulk enqueue functions to return the number of free spaces in the ring after enqueue. This can be used by an application to implement its own watermark functionality. * added an extra parameter to the burst/bulk dequeue functions to return the number elements remaining in the ring after dequeue. * changed the return value of the enqueue and dequeue bulk functions to match that of the burst equivalents. In all cases, ring functions which operate on multiple packets now return the number of elements enqueued or dequeued, as appropriate. The updated functions are: - ``rte_ring_mp_enqueue_bulk`` - ``rte_ring_sp_enqueue_bulk`` - ``rte_ring_enqueue_bulk`` - ``rte_ring_mc_dequeue_bulk`` - ``rte_ring_sc_dequeue_bulk`` - ``rte_ring_dequeue_bulk`` NOTE: the above functions all have different parameters as well as different return values, due to the other listed changes above. This means that all instances of the functions in existing code will be flagged by the compiler. The return value usage should be checked while fixing the compiler error due to the extra parameter. * **Reworked rte_vhost library** The rte_vhost library has been reworked to make it generic enough so that user could build other vhost-user drivers on top of it. To achieve that, following changes have been made: * The following vhost-pmd APIs are removed: * ``rte_eth_vhost_feature_disable`` * ``rte_eth_vhost_feature_enable`` * ``rte_eth_vhost_feature_get`` * The vhost API ``rte_vhost_driver_callback_register(ops)`` is reworked to be per vhost-user socket file. Thus, it takes one more argument: ``rte_vhost_driver_callback_register(path, ops)``. * The vhost API ``rte_vhost_get_queue_num`` is deprecated, instead, ``rte_vhost_get_vring_num`` should be used. * Following macros are removed in ``rte_virtio_net.h`` * ``VIRTIO_RXQ`` * ``VIRTIO_TXQ`` * ``VIRTIO_QNUM`` ABI Changes ----------- .. This section should contain ABI changes. Sample format: * Add a short 1-2 sentence description of the ABI change that was announced in the previous releases and made in this release. Use fixed width quotes for ``rte_function_names`` or ``rte_struct_names``. Use the past tense. This section is a comment. do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= Removed Items ------------- .. This section should contain removed items in this release. Sample format: * Add a short 1-2 sentence description of the removed item in the past tense. This section is a comment. do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * KNI vhost support removed. Shared Library Versions ----------------------- .. Update any library version updated in this release and prepend with a ``+`` sign, like this: librte_acl.so.2 + librte_cfgfile.so.2 librte_cmdline.so.2 This section is a comment. do not overwrite or remove it. ========================================================= The libraries prepended with a plus sign were incremented in this version. .. code-block:: diff librte_acl.so.2 librte_cfgfile.so.2 librte_cmdline.so.2 librte_cryptodev.so.2 librte_distributor.so.1 librte_eal.so.3 librte_ethdev.so.6 librte_hash.so.2 librte_ip_frag.so.1 librte_jobstats.so.1 librte_kni.so.2 librte_kvargs.so.1 librte_lpm.so.2 librte_mbuf.so.2 librte_mempool.so.2 librte_meter.so.1 librte_net.so.1 librte_pdump.so.1 librte_pipeline.so.3 librte_pmd_bond.so.1 librte_pmd_ring.so.2 librte_port.so.3 librte_power.so.1 librte_reorder.so.1 librte_ring.so.1 librte_sched.so.1 librte_table.so.2 librte_timer.so.1 librte_vhost.so.3 Tested Platforms ---------------- .. This section should contain a list of platforms that were tested with this release. The format is: * platform with combinations * List of CPU * List of OS * List of devices * Other relevant details... This section is a comment. do not overwrite or remove it. Also, make sure to start the actual text at the margin. =========================================================