DPDK Release 17.11 ================== .. **Read this first.** The text in the sections below explains how to update the release notes. Use proper spelling, capitalization and punctuation in all sections. Variable and config names should be quoted as fixed width text: ``LIKE_THIS``. Build the docs and view the output file to ensure the changes are correct:: make doc-guides-html xdg-open build/doc/html/guides/rel_notes/release_17_11.html New Features ------------ .. This section should contain new features added in this release. Sample format: * **Add a title in the past tense with a full stop.** Add a short 1-2 sentence description in the past tense. The description should be enough to allow someone scanning the release notes to understand the new feature. If the feature adds a lot of sub-features you can use a bullet list like this: * Added feature foo to do something. * Enhanced feature bar to do something else. Refer to the previous release notes for examples. This section is a comment. do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * **Extended port_id range from uint8_t to uint16_t.** Increased port_id range from 8 bits to 16 bits in order to support more than 256 ports in dpdk. All ethdev APIs which have port_id as parameter are changed in the meantime. * **Modified the return type of rte_eth_stats_reset.** Changed return type of ``rte_eth_stats_reset`` from ``void`` to ``int`` so the caller may know whether a device supports the operation or not and if the operation was carried out. * **Added a new driver for Marvell Armada 7k/8k devices.** Added the new mrvl net driver for Marvell Armada 7k/8k devices. See the "Network Interface Controller Drivers" document for more details on this new driver. * **Updated mlx5 driver.** Updated the mlx5 driver including the following changes: * Enabled PMD to run on top of upstream linux kernel and rdma-core libs. By that removed the dependency on specific Mellanox OFED libraries. * Improved PMD latency performance. * Improved PMD memory footprint. * Supported vectorized Rx/Tx burst for ARMv8. * Supported secondary process. * Supported flow counters. * Supported Rx hardware timestamp offload. * Supported device removal event. * **Added SoftNIC PMD.** Added new SoftNIC PMD. This virtual device offers applications a software fallback support for traffic management. * **Added support for NXP DPAA Devices.** Added support for NXP's DPAA devices - LS104x series. This includes: * DPAA Bus driver * DPAA Mempool driver for supporting offloaded packet memory pool * DPAA PMD for DPAA devices See the "Network Interface Controller Drivers" document for more details of this new driver. * **Updated support for Cavium OCTEONTX Device.** Updated support for Cavium's OCTEONTX device(CN83xx). This includes: * OCTEONTX Mempool driver for supporting offloaded packet memory pool * OCTEONTX Ethdev PMD * OCTEONTX Eventdev-Ethdev Rx adapter See the "Network Interface Controller Drivers" document for more details of this new driver. * **nfp: Added PF support.** Previously Netronome's NFP PMD had just support for VFs. PF support is just as a basic DPDK port and has no VF management yet. PF support comes with firmware upload support which allows the PMD to independently work from kernel netdev NFP drivers. NFP 4000 devices are also now supported along with previous 6000 devices. * **Updated bnxt PMD.** Major enhancements include: * Support for Flow API * Support for Tx and Rx descriptor status functions * **Add bus agnostic functions to cryptodev for PMD initialisation** Adds new PMD assist functions ``rte_cryptodev_pmd_parse_input_args()``, ``rte_cryptodev_pmd_create()`` and ``rte_cryptodev_pmd_destroy()`` which are bus independent for driver to manage creation and destruction of new device instances. * **Updated QAT crypto PMD.** Performance enhancements: * Removed atomics from the internal queue pair structure. * Coalesce writes to HEAD CSR on response processing. * Coalesce writes to TAIL CSR on request processing. Additional support for: * AES CCM algorithm. * **Updated the AESNI MB PMD.** The AESNI MB PMD has been updated with additional support for: * DES CBC algorithm. * DES DOCSIS BPI algorithm. This requires the IPSec Multi-buffer library 0.47. For more details, check out the AESNI MB PMD documenation. * **Updated the OpenSSL PMD.** The OpenSSL PMD has been updated with additional support for: * DES CBC algorithm. * AES CCM algorithm. * **Added NXP DPAA SEC crypto PMD.** A new "dpaa_sec" hardware based crypto PMD for NXP DPAA devices has been added. See the "Crypto Device Drivers" document for more details on this driver. * **Added MRVL crypto PMD.** A new crypto PMD has been added, which provides several ciphering and hashing algorithms. All cryptography operations use the MUSDK library crypto API. * **Add new benchmarking mode to dpdk-test-crypto-perf application.** Added new "PMD cyclecount" benchmark mode to dpdk-test-crypto-perf application that displays more detailed breakdown of CPU cycles used by hardware acceleration. * **Added the Security Offload Library.** Added an experimental library - rte_security. It provide security APIs for protocols like IPSec using inline ipsec offload to ethernet device or full protocol offload with lookaside crypto device. See the "Security_Library" section of the DPDK Programmers Guide document, for more information. * **Updated DPAA2_SEC crypto driver.** Updated dpaa2_sec crypto PMD to support rte_security lookaside protocol offload for IPSec. * **Updated IXGBE ethernet driver.** Updated ixgbe ethernet PMD to support rte_security inline IPSec offload. * **Updated ipsec-secgw application** Updated ipsec-secgw sample application to support rte_security actions for ipsec inline and full protocol offload using lookaside crypto offload. * **Added IOMMU support to libvhost-user** Implemented device IOTLB in Vhost-user backend, and enabled Virtio's IOMMU feature. The feature is disabled by default, and can be enabled by setting RTE_VHOST_USER_IOMMU_SUPPORT flag at vhost device registration time. * **Added the Event Ethernet Adapter Library.** Added the Event Ethernet Adapter library. It provices APIs for eventdev applications to configure the ethdev to eventdev packet flow. * **Updated DPAA2 Event PMD.** Added support for eventdev ethernet adapter for DPAA2. * **Added Membership library (rte_member).** Added membership library. It provides an API for DPDK applications to insert a new member, delete an existing member, or query the existence of a member in a given set, or a group of sets. For the case of a group of sets the library will return not only whether the element has been inserted before in one of the sets but also which set it belongs to. The Membership Library is an extension and generalization of a traditional filter (for example Bloom Filter) structure that has multiple usages in a wide variety of workloads and applications. In general, the Membership Library is a data structure that provides a “set-summary” and responds to set-membership queries whether a certain member belongs to a set(s). See the :ref:`Membership Library ` documentation in the Programmers Guide document, for more information. * **Added the Generic Segmentation Offload Library.** Added the Generic Segmentation Offload (GSO) library to enable applications to split large packets (e.g. MTU is 64KB) into small ones (e.g. MTU is 1500B). Supported packet types are: * TCP/IPv4 packets. * VxLAN packets, which must have an outer IPv4 header, and contain an inner TCP/IPv4 packet. * GRE packets, which must contain an outer IPv4 header, and inner TCP/IPv4 headers. The GSO library doesn't check if the input packets have correct checksums, and doesn't update checksums for output packets. Additionally, the GSO library doesn't process IP fragmented packets. * **Added the Flow Classification Library.** Added the Flow Classification library, it provides an API for DPDK applications to classify an input packet by matching it against a set of flow rules. It uses the librte_table API to manage the flow rules. Resolved Issues --------------- .. This section should contain bug fixes added to the relevant sections. Sample format: * **code/section Fixed issue in the past tense with a full stop.** Add a short 1-2 sentence description of the resolved issue in the past tense. The title should contain the code/lib section like a commit message. Add the entries in alphabetic order in the relevant sections below. This section is a comment. do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= EAL ~~~ * **Service core fails to call service callback due to atomic lock** In a specific configuration of multi-thread unsafe services and service cores, a service core previously did not correctly release the atomic lock on the service. This would result in the cores polling the service, but it looked like another thread was executing the service callback. The logic for atomic locking of the services has been fixed and refactored for readability. Drivers ~~~~~~~ Libraries ~~~~~~~~~ Examples ~~~~~~~~ Other ~~~~~ Known Issues ------------ .. This section should contain new known issues in this release. Sample format: * **Add title in present tense with full stop.** Add a short 1-2 sentence description of the known issue in the present tense. Add information on any known workarounds. This section is a comment. do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= API Changes ----------- .. This section should contain API changes. Sample format: * Add a short 1-2 sentence description of the API change. Use fixed width quotes for ``rte_function_names`` or ``rte_struct_names``. Use the past tense. This section is a comment. do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * **Ethdev device name length increased** The size of internal device name is increased to 64 characters to allow for storing longer bus specific name. * **Ethdev flag RTE_ETH_DEV_DETACHABLE was removed** This flag is not necessary anymore, with the new hotplug implementation. It is now removed from the ether library. Its semantic is expressed at the bus and PMD level. * **Service cores API updated for usability** The service cores API has been changed, removing pointers from the API where possible, instead using integer IDs to identify each service. This simplifed application code, aids debugging, and provides better encapsulation. A summary of the main changes made is as follows: * Services identified by ID not by ``rte_service_spec`` pointer * Reduced API surface by using ``set`` functions instead of enable/disable * Reworked ``rte_service_register`` to provide the service ID to registrar * Rework start and stop APIs into ``rte_service_runstate_set`` * Added API to set runstate of service implementation to indicate readyness * **The following changes made in mempool library** * Moved ``flags`` datatype from int to unsigned int for ``rte_mempool``. * Removed ``__rte_unused int flag`` param from ``rte_mempool_generic_put`` and ``rte_mempool_generic_get`` API. * Added ``flags`` param in ``rte_mempool_xmem_size`` and ``rte_mempool_xmem_usage``. * Xen dom0 in EAL was removed, as well as xenvirt PMD and vhost_xen. * ``rte_mem_phy2mch`` was used in Xen dom0 to obtain the physical address; remove this API as Xen dom0 support was removed. * **Some data type, structure members and functions related to physical address are deprecated and have new alias with IOVA wording.** * ``phys_addr_t`` can be often replaced by ``rte_iova_t`` of same size. * ``RTE_BAD_PHYS_ADDR`` is often replaced by ``RTE_BAD_IOVA`` of same value. * ``rte_memseg.phys_addr`` is aliased with ``rte_memseg.iova_addr``. * ``rte_mem_virt2phy()`` can often be replaced by ``rte_mem_virt2iova``. * ``rte_malloc_virt2phy`` is aliased with ``rte_malloc_virt2iova``. * ``rte_memzone.phys_addr`` is aliased with ``rte_memzone.iova``. * ``rte_mempool_objhdr.physaddr`` is aliased with ``rte_mempool_objhdr.iova``. * ``rte_mempool_memhdr.phys_addr`` is aliased with ``rte_mempool_memhdr.iova``. * ``rte_mempool_virt2phy()`` can be replaced by ``rte_mempool_virt2iova()``. * ``rte_mempool_populate_phys*()`` are aliased with ``rte_mempool_populate_iova*()`` * ``rte_mbuf.buf_physaddr`` is aliased with ``rte_mbuf.buf_iova``. * ``rte_mbuf_data_dma_addr*()`` are aliased with ``rte_mbuf_data_iova*()``. * ``rte_pktmbuf_mtophys*`` are aliased with ``rte_pktmbuf_iova*()``. * **PCI bus API moved outside of the EAL** The PCI bus previously implemented within the EAL has been moved. A first part has been added as an RTE library providing PCI helpers to parse device locations or other such utilities. A second part consisting in the actual bus driver has been moved to its proper subdirectory, without changing its functionalities. As such, several PCI-related functions are not proposed by the EAL anymore: * rte_pci_detach * rte_pci_dump * rte_pci_ioport_map * rte_pci_ioport_read * rte_pci_ioport_unmap * rte_pci_ioport_write * rte_pci_map_device * rte_pci_probe * rte_pci_probe_one * rte_pci_read_config * rte_pci_register * rte_pci_scan * rte_pci_unmap_device * rte_pci_unregister * rte_pci_write_config These functions are made available either as part of ``librte_pci`` or ``librte_bus_pci``. * **Moved vdev bus APIs outside of the EAL** Moved the following APIs from ``librte_eal`` to ``librte_bus_vdev``: * ``rte_vdev_init`` * ``rte_vdev_register`` * ``rte_vdev_uninit`` * ``rte_vdev_unregister`` * **Add return value to stats_get dev op API** The ``stats_get`` dev op API return value has been changed to be int. By this way PMDs can return an error value in case of failure at stats getting process time. * **Modified the rte_cryptodev_allocate_driver function in the cryptodev library.** The function ``rte_cryptodev_allocate_driver()`` has been modified. An extra parameter ``struct cryptodev_driver *crypto_drv`` has been added. * **Removed virtual device bus specific functions from librte_cryptodev.** The functions ``rte_cryptodev_vdev_parse_init_params()`` and ``rte_cryptodev_vdev_pmd_init()`` have been removed from librte_cryptodev and have been replaced by non bus specific functions ``rte_cryptodev_pmd_parse_input_args()`` and ``rte_cryptodev_pmd_create()``. * ``rte_cryptodev_create_vdev`` was removed to avoid the dependency on vdev in librte_cryptodev; instead, users can call rte_vdev_init() directly. * **Removed PCI device bus specific functions from librte_cryptodev.** The functions ``rte_cryptodev_pci_generic_probe()`` and ``rte_cryptodev_pci_generic_remove()`` have been removed from librte_cryptodev and have been replaced by non bus specific functions ``rte_cryptodev_pmd_create()`` and ``rte_cryptodev_pmd_destroy()``. * **Removed deprecated functions to manage log level or type.** The functions ``rte_set_log_level()``, ``rte_get_log_level()``, ``rte_set_log_type()`` and ``rte_get_log_type()`` have been removed. They are respectively replaced by ``rte_log_set_global_level()``, ``rte_log_get_global_level()``, ``rte_log_set_level()`` and ``rte_log_get_level()``. * **Removed ``mbuf`` flags ``PKT_RX_VLAN_PKT`` and ``PKT_RX_QINQ_PKT``.** The ``mbuf`` flags ``PKT_RX_VLAN_PKT`` and ``PKT_RX_QINQ_PKT`` have been removed since their behavior were not properly described. * **Added ``mbuf`` flags ``PKT_RX_VLAN`` and ``PKT_RX_QINQ``.** Two ``mbuf`` flags have been added to indicate that the VLAN identifier has been saved in in the ``mbuf`` structure. For instance: - if VLAN is not stripped and TCI is saved: ``PKT_RX_VLAN`` - if VLAN is stripped and TCI is saved: ``PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED`` * **Modified the vlan_offload_set_t function prototype in the ethdev library.** Changed the function prototype of ``vlan_offload_set_t``. The return value has been changed from ``void`` to ``int`` so the caller to knows whether the backing device supports the operation or if the operation was successfully performed. ABI Changes ----------- .. This section should contain ABI changes. Sample format: * Add a short 1-2 sentence description of the ABI change that was announced in the previous releases and made in this release. Use fixed width quotes for ``rte_function_names`` or ``rte_struct_names``. Use the past tense. This section is a comment. do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * **Extended port_id range.** The size of the field ``port_id`` in the ``rte_eth_dev_data`` structure changed, as described in the `New Features` section. * **New parameter added to rte_eth_dev.** New parameter ``security_ctx`` added to ``rte_eth_dev`` to support security operations like IPSec inline. * **New parameter added to rte_cryptodev.** New parameter ``security_ctx`` added to ``rte_cryptodev`` to support security operations like lookaside crypto. Removed Items ------------- .. This section should contain removed items in this release. Sample format: * Add a short 1-2 sentence description of the removed item in the past tense. This section is a comment. do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * The crypto performance unit tests have been removed, replaced by the dpdk-test-crypto-perf application. Shared Library Versions ----------------------- .. Update any library version updated in this release and prepend with a ``+`` sign, like this: librte_acl.so.2 + librte_cfgfile.so.2 librte_cmdline.so.2 This section is a comment. do not overwrite or remove it. ========================================================= The libraries prepended with a plus sign were incremented in this version. .. code-block:: diff librte_acl.so.2 + librte_bitratestats.so.2 + librte_bus_vdev.so.1 librte_cfgfile.so.2 librte_cmdline.so.2 + librte_cryptodev.so.4 librte_distributor.so.1 + librte_eal.so.6 + librte_ethdev.so.8 + librte_eventdev.so.3 + librte_flow_classify.so.1 librte_gro.so.1 + librte_gso.so.1 librte_hash.so.2 librte_ip_frag.so.1 librte_jobstats.so.1 librte_kni.so.2 librte_kvargs.so.1 librte_latencystats.so.1 librte_lpm.so.2 librte_mbuf.so.3 + librte_mempool.so.3 librte_meter.so.1 librte_metrics.so.1 librte_net.so.1 + librte_pci.so.1 + librte_pdump.so.2 librte_pipeline.so.3 + librte_pmd_bnxt.so.2 + librte_pmd_bond.so.2 + librte_pmd_i40e.so.2 + librte_pmd_ixgbe.so.2 librte_pmd_ring.so.2 + librte_pmd_softnic.so.1 + librte_pmd_vhost.so.2 librte_port.so.3 librte_power.so.1 librte_reorder.so.1 librte_ring.so.1 librte_sched.so.1 + librte_security.so.1 + librte_table.so.3 librte_timer.so.1 librte_vhost.so.3 Tested Platforms ---------------- .. This section should contain a list of platforms that were tested with this release. The format is: * platform with combinations * List of CPU * List of OS * List of devices * Other relevant details... This section is a comment. do not overwrite or remove it. Also, make sure to start the actual text at the margin. =========================================================