From: Dekel Peled Date: Wed, 15 Jul 2020 07:31:01 +0000 (+0300) Subject: net/mlx5: fix VLAN push action on hairpin queue X-Git-Url: http://git.droids-corp.org/?p=dpdk.git;a=commitdiff_plain;h=210008309b45316288869377be574c22f670b825 net/mlx5: fix VLAN push action on hairpin queue Push VLAN action is allowed on Tx only, same as encap action. Flow rules for hairpin queue are created on Rx, and split by PMD to Rx and Tx rules, according to the above limitation. In current implementation the encap action is split to Tx rule. This patch adds the same handling for push-vlan action, as well as its complementing actions set-vlan-vid and set-vlan-pcp. Fixes: d85c7b5ea59f ("net/mlx5: split hairpin flows") Cc: stable@dpdk.org Signed-off-by: Dekel Peled Acked-by: Matan Azrad --- diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c index e83cf8311e..b56bee43bd 100644 --- a/drivers/net/mlx5/mlx5_flow.c +++ b/drivers/net/mlx5/mlx5_flow.c @@ -2876,10 +2876,10 @@ flow_check_meter_action(const struct rte_flow_action actions[], uint32_t *mtr) } /** - * Check if the flow should be splited due to hairpin. + * Check if the flow should be split due to hairpin. * The reason for the split is that in current HW we can't - * support encap on Rx, so if a flow have encap we move it - * to Tx. + * support encap and push-vlan on Rx, so if a flow contains + * these actions we move it to Tx. * * @param dev * Pointer to Ethernet device. @@ -2899,7 +2899,7 @@ flow_check_hairpin_split(struct rte_eth_dev *dev, { int queue_action = 0; int action_n = 0; - int encap = 0; + int split = 0; const struct rte_flow_action_queue *queue; const struct rte_flow_action_rss *rss; const struct rte_flow_action_raw_encap *raw_encap; @@ -2930,7 +2930,10 @@ flow_check_hairpin_split(struct rte_eth_dev *dev, break; case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP: case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP: - encap = 1; + case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN: + case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID: + case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP: + split++; action_n++; break; case RTE_FLOW_ACTION_TYPE_RAW_ENCAP: @@ -2938,7 +2941,7 @@ flow_check_hairpin_split(struct rte_eth_dev *dev, if (raw_encap->size > (sizeof(struct rte_flow_item_eth) + sizeof(struct rte_flow_item_ipv4))) - encap = 1; + split++; action_n++; break; default: @@ -2946,7 +2949,7 @@ flow_check_hairpin_split(struct rte_eth_dev *dev, break; } } - if (encap == 1 && queue_action) + if (split && queue_action) return action_n; return 0; } @@ -3388,7 +3391,8 @@ flow_mreg_update_copy_table(struct rte_eth_dev *dev, /** * Split the hairpin flow. - * Since HW can't support encap on Rx we move the encap to Tx. + * Since HW can't support encap and push-vlan on Rx, we move these + * actions to Tx. * If the count action is after the encap then we also * move the count action. in this case the count will also measure * the outer bytes. @@ -3432,6 +3436,9 @@ flow_hairpin_split(struct rte_eth_dev *dev, switch (actions->type) { case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP: case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP: + case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN: + case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID: + case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP: rte_memcpy(actions_tx, actions, sizeof(struct rte_flow_action)); actions_tx++; diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c index 5ba788a330..12c7db79d3 100644 --- a/drivers/net/mlx5/mlx5_flow_dv.c +++ b/drivers/net/mlx5/mlx5_flow_dv.c @@ -1951,22 +1951,11 @@ flow_dv_validate_action_push_vlan(struct rte_eth_dev *dev, const struct rte_flow_action_of_push_vlan *push_vlan = action->conf; const struct mlx5_priv *priv = dev->data->dev_private; - if (!attr->transfer && attr->ingress) - return rte_flow_error_set(error, ENOTSUP, - RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, - NULL, - "push VLAN action not supported for " - "ingress"); if (push_vlan->ethertype != RTE_BE16(RTE_ETHER_TYPE_VLAN) && push_vlan->ethertype != RTE_BE16(RTE_ETHER_TYPE_QINQ)) return rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION, action, "invalid vlan ethertype"); - if (action_flags & MLX5_FLOW_VLAN_ACTIONS) - return rte_flow_error_set(error, ENOTSUP, - RTE_FLOW_ERROR_TYPE_ACTION, action, - "no support for multiple VLAN " - "actions"); if (action_flags & MLX5_FLOW_ACTION_PORT_ID) return rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION, action, @@ -5691,21 +5680,38 @@ flow_dv_validate(struct rte_eth_dev *dev, const struct rte_flow_attr *attr, actions, "no fate action is found"); } - /* Continue validation for Xcap actions.*/ - if ((action_flags & MLX5_FLOW_XCAP_ACTIONS) && (queue_index == 0xFFFF || - mlx5_rxq_get_type(dev, queue_index) != MLX5_RXQ_TYPE_HAIRPIN)) { + /* Continue validation for Xcap and VLAN actions.*/ + if ((action_flags & (MLX5_FLOW_XCAP_ACTIONS | + MLX5_FLOW_VLAN_ACTIONS)) && + (queue_index == 0xFFFF || + mlx5_rxq_get_type(dev, queue_index) != MLX5_RXQ_TYPE_HAIRPIN)) { if ((action_flags & MLX5_FLOW_XCAP_ACTIONS) == MLX5_FLOW_XCAP_ACTIONS) return rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION, NULL, "encap and decap " "combination aren't supported"); - if (!attr->transfer && attr->ingress && (action_flags & - MLX5_FLOW_ACTION_ENCAP)) - return rte_flow_error_set(error, ENOTSUP, - RTE_FLOW_ERROR_TYPE_ACTION, - NULL, "encap is not supported" - " for ingress traffic"); + if (!attr->transfer && attr->ingress) { + if (action_flags & MLX5_FLOW_ACTION_ENCAP) + return rte_flow_error_set + (error, ENOTSUP, + RTE_FLOW_ERROR_TYPE_ACTION, + NULL, "encap is not supported" + " for ingress traffic"); + else if (action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN) + return rte_flow_error_set + (error, ENOTSUP, + RTE_FLOW_ERROR_TYPE_ACTION, + NULL, "push VLAN action not " + "supported for ingress"); + else if ((action_flags & MLX5_FLOW_VLAN_ACTIONS) == + MLX5_FLOW_VLAN_ACTIONS) + return rte_flow_error_set + (error, ENOTSUP, + RTE_FLOW_ERROR_TYPE_ACTION, + NULL, "no support for " + "multiple VLAN actions"); + } } /* Hairpin flow will add one more TAG action. */ if (hairpin > 0)