From: Hemant Agrawal <hemant.agrawal@nxp.com>
Date: Tue, 11 Jul 2017 14:55:59 +0000 (+0530)
Subject: drivers: add newline in dpaa2 logs
X-Git-Tag: spdx-start~2489
X-Git-Url: http://git.droids-corp.org/?p=dpdk.git;a=commitdiff_plain;h=645bd25ad8f905fcdf06b9c319228af03ff8708e

drivers: add newline in dpaa2 logs

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---

diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
index 9fc9dea11c..d6c3088c48 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
@@ -669,7 +669,7 @@ sec_fd_to_mbuf(const struct qbman_fd *fd)
 
 	if (unlikely(DPAA2_GET_FD_IVP(fd))) {
 		/* TODO complete it. */
-		RTE_LOG(ERR, PMD, "error: Non inline buffer - WHAT to DO?");
+		RTE_LOG(ERR, PMD, "error: Non inline buffer - WHAT to DO?\n");
 		return NULL;
 	}
 	op = (struct rte_crypto_op *)DPAA2_IOVA_TO_VADDR(
@@ -731,8 +731,8 @@ dpaa2_sec_dequeue_burst(void *qp, struct rte_crypto_op **ops,
 	/*Issue a volatile dequeue command. */
 	while (1) {
 		if (qbman_swp_pull(swp, &pulldesc)) {
-			RTE_LOG(WARNING, PMD, "SEC VDQ command is not issued."
-				"QBMAN is busy\n");
+			RTE_LOG(WARNING, PMD,
+				"SEC VDQ command is not issued : QBMAN busy\n");
 			/* Portal was busy, try again */
 			continue;
 		}
@@ -926,7 +926,7 @@ dpaa2_sec_cipher_init(struct rte_cryptodev *dev,
 			sizeof(struct ctxt_priv) + sizeof(struct sec_flc_desc),
 			RTE_CACHE_LINE_SIZE);
 	if (priv == NULL) {
-		RTE_LOG(ERR, PMD, "No Memory for priv CTXT");
+		RTE_LOG(ERR, PMD, "No Memory for priv CTXT\n");
 		return -1;
 	}
 
@@ -937,7 +937,7 @@ dpaa2_sec_cipher_init(struct rte_cryptodev *dev,
 	session->cipher_key.data = rte_zmalloc(NULL, xform->cipher.key.length,
 			RTE_CACHE_LINE_SIZE);
 	if (session->cipher_key.data == NULL) {
-		RTE_LOG(ERR, PMD, "No Memory for cipher key");
+		RTE_LOG(ERR, PMD, "No Memory for cipher key\n");
 		rte_free(priv);
 		return -1;
 	}
@@ -980,7 +980,7 @@ dpaa2_sec_cipher_init(struct rte_cryptodev *dev,
 	case RTE_CRYPTO_CIPHER_SNOW3G_UEA2:
 	case RTE_CRYPTO_CIPHER_ZUC_EEA3:
 	case RTE_CRYPTO_CIPHER_NULL:
-		RTE_LOG(ERR, PMD, "Crypto: Unsupported Cipher alg %u",
+		RTE_LOG(ERR, PMD, "Crypto: Unsupported Cipher alg %u\n",
 			xform->cipher.algo);
 		goto error_out;
 	default:
@@ -1042,7 +1042,7 @@ dpaa2_sec_auth_init(struct rte_cryptodev *dev,
 			sizeof(struct sec_flc_desc),
 			RTE_CACHE_LINE_SIZE);
 	if (priv == NULL) {
-		RTE_LOG(ERR, PMD, "No Memory for priv CTXT");
+		RTE_LOG(ERR, PMD, "No Memory for priv CTXT\n");
 		return -1;
 	}
 
@@ -1052,7 +1052,7 @@ dpaa2_sec_auth_init(struct rte_cryptodev *dev,
 	session->auth_key.data = rte_zmalloc(NULL, xform->auth.key.length,
 			RTE_CACHE_LINE_SIZE);
 	if (session->auth_key.data == NULL) {
-		RTE_LOG(ERR, PMD, "No Memory for auth key");
+		RTE_LOG(ERR, PMD, "No Memory for auth key\n");
 		rte_free(priv);
 		return -1;
 	}
@@ -1112,7 +1112,7 @@ dpaa2_sec_auth_init(struct rte_cryptodev *dev,
 	case RTE_CRYPTO_AUTH_AES_CMAC:
 	case RTE_CRYPTO_AUTH_AES_CBC_MAC:
 	case RTE_CRYPTO_AUTH_ZUC_EIA3:
-		RTE_LOG(ERR, PMD, "Crypto: Unsupported auth alg %u",
+		RTE_LOG(ERR, PMD, "Crypto: Unsupported auth alg %u\n",
 			xform->auth.algo);
 		goto error_out;
 	default:
@@ -1174,7 +1174,7 @@ dpaa2_sec_aead_init(struct rte_cryptodev *dev,
 			sizeof(struct ctxt_priv) + sizeof(struct sec_flc_desc),
 			RTE_CACHE_LINE_SIZE);
 	if (priv == NULL) {
-		RTE_LOG(ERR, PMD, "No Memory for priv CTXT");
+		RTE_LOG(ERR, PMD, "No Memory for priv CTXT\n");
 		return -1;
 	}
 
@@ -1184,7 +1184,7 @@ dpaa2_sec_aead_init(struct rte_cryptodev *dev,
 	session->aead_key.data = rte_zmalloc(NULL, aead_xform->key.length,
 					       RTE_CACHE_LINE_SIZE);
 	if (session->aead_key.data == NULL && aead_xform->key.length > 0) {
-		RTE_LOG(ERR, PMD, "No Memory for aead key");
+		RTE_LOG(ERR, PMD, "No Memory for aead key\n");
 		rte_free(priv);
 		return -1;
 	}
@@ -1207,7 +1207,7 @@ dpaa2_sec_aead_init(struct rte_cryptodev *dev,
 		session->cipher_alg = RTE_CRYPTO_AEAD_AES_GCM;
 		break;
 	case RTE_CRYPTO_AEAD_AES_CCM:
-		RTE_LOG(ERR, PMD, "Crypto: Unsupported AEAD alg %u",
+		RTE_LOG(ERR, PMD, "Crypto: Unsupported AEAD alg %u\n",
 			aead_xform->algo);
 		goto error_out;
 	default:
@@ -1225,7 +1225,7 @@ dpaa2_sec_aead_init(struct rte_cryptodev *dev,
 			       &priv->flc_desc[0].desc[1], 1);
 
 	if (err < 0) {
-		PMD_DRV_LOG(ERR, "Crypto: Incorrect key lengths");
+		PMD_DRV_LOG(ERR, "Crypto: Incorrect key lengths\n");
 		goto error_out;
 	}
 	if (priv->flc_desc[0].desc[1] & 1) {
@@ -1308,7 +1308,7 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
 			sizeof(struct ctxt_priv) + sizeof(struct sec_flc_desc),
 			RTE_CACHE_LINE_SIZE);
 	if (priv == NULL) {
-		RTE_LOG(ERR, PMD, "No Memory for priv CTXT");
+		RTE_LOG(ERR, PMD, "No Memory for priv CTXT\n");
 		return -1;
 	}
 
@@ -1318,7 +1318,7 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
 	session->cipher_key.data = rte_zmalloc(NULL, cipher_xform->key.length,
 					       RTE_CACHE_LINE_SIZE);
 	if (session->cipher_key.data == NULL && cipher_xform->key.length > 0) {
-		RTE_LOG(ERR, PMD, "No Memory for cipher key");
+		RTE_LOG(ERR, PMD, "No Memory for cipher key\n");
 		rte_free(priv);
 		return -1;
 	}
@@ -1326,7 +1326,7 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
 	session->auth_key.data = rte_zmalloc(NULL, auth_xform->key.length,
 					     RTE_CACHE_LINE_SIZE);
 	if (session->auth_key.data == NULL && auth_xform->key.length > 0) {
-		RTE_LOG(ERR, PMD, "No Memory for auth key");
+		RTE_LOG(ERR, PMD, "No Memory for auth key\n");
 		rte_free(session->cipher_key.data);
 		rte_free(priv);
 		return -1;
@@ -1389,7 +1389,7 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
 	case RTE_CRYPTO_AUTH_AES_CMAC:
 	case RTE_CRYPTO_AUTH_AES_CBC_MAC:
 	case RTE_CRYPTO_AUTH_ZUC_EIA3:
-		RTE_LOG(ERR, PMD, "Crypto: Unsupported auth alg %u",
+		RTE_LOG(ERR, PMD, "Crypto: Unsupported auth alg %u\n",
 			auth_xform->algo);
 		goto error_out;
 	default:
@@ -1423,7 +1423,7 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
 	case RTE_CRYPTO_CIPHER_3DES_ECB:
 	case RTE_CRYPTO_CIPHER_AES_ECB:
 	case RTE_CRYPTO_CIPHER_KASUMI_F8:
-		RTE_LOG(ERR, PMD, "Crypto: Unsupported Cipher alg %u",
+		RTE_LOG(ERR, PMD, "Crypto: Unsupported Cipher alg %u\n",
 			cipher_xform->algo);
 		goto error_out;
 	default:
@@ -1442,7 +1442,7 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
 			       &priv->flc_desc[0].desc[2], 2);
 
 	if (err < 0) {
-		PMD_DRV_LOG(ERR, "Crypto: Incorrect key lengths");
+		PMD_DRV_LOG(ERR, "Crypto: Incorrect key lengths\n");
 		goto error_out;
 	}
 	if (priv->flc_desc[0].desc[2] & 1) {
@@ -1469,7 +1469,7 @@ dpaa2_sec_aead_chain_init(struct rte_cryptodev *dev,
 					      session->digest_length,
 					      session->dir);
 	} else {
-		RTE_LOG(ERR, PMD, "Hash before cipher not supported");
+		RTE_LOG(ERR, PMD, "Hash before cipher not supported\n");
 		goto error_out;
 	}
 
@@ -1503,7 +1503,7 @@ dpaa2_sec_set_session_parameters(struct rte_cryptodev *dev,
 	PMD_INIT_FUNC_TRACE();
 
 	if (unlikely(sess == NULL)) {
-		RTE_LOG(ERR, PMD, "invalid session struct");
+		RTE_LOG(ERR, PMD, "invalid session struct\n");
 		return -1;
 	}
 
@@ -1539,7 +1539,7 @@ dpaa2_sec_set_session_parameters(struct rte_cryptodev *dev,
 		dpaa2_sec_aead_init(dev, xform, session);
 
 	} else {
-		RTE_LOG(ERR, PMD, "Invalid crypto type");
+		RTE_LOG(ERR, PMD, "Invalid crypto type\n");
 		return -1;
 	}
 
@@ -1910,7 +1910,7 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev)
 			NULL, NULL, NULL, NULL,
 			SOCKET_ID_ANY, 0);
 	if (!internals->fle_pool) {
-		RTE_LOG(ERR, PMD, "%s create failed", str);
+		RTE_LOG(ERR, PMD, "%s create failed\n", str);
 		goto init_error;
 	} else
 		RTE_LOG(INFO, PMD, "%s created: %p\n", str,
diff --git a/drivers/mempool/dpaa2/dpaa2_hw_mempool.c b/drivers/mempool/dpaa2/dpaa2_hw_mempool.c
index d578c2f844..973b9d4f11 100644
--- a/drivers/mempool/dpaa2/dpaa2_hw_mempool.c
+++ b/drivers/mempool/dpaa2/dpaa2_hw_mempool.c
@@ -188,7 +188,7 @@ rte_dpaa2_mbuf_release(struct rte_mempool *pool __rte_unused,
 	if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
 		ret = dpaa2_affine_qbman_swp();
 		if (ret != 0) {
-			RTE_LOG(ERR, PMD, "Failed to allocate IO portal");
+			RTE_LOG(ERR, PMD, "Failed to allocate IO portal\n");
 			return;
 		}
 	}
@@ -267,7 +267,7 @@ rte_dpaa2_mbuf_alloc_bulk(struct rte_mempool *pool,
 	if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
 		ret = dpaa2_affine_qbman_swp();
 		if (ret != 0) {
-			RTE_LOG(ERR, PMD, "Failed to allocate IO portal");
+			RTE_LOG(ERR, PMD, "Failed to allocate IO portal\n");
 			return ret;
 		}
 	}
@@ -323,7 +323,7 @@ rte_hw_mbuf_free_bulk(struct rte_mempool *pool,
 
 	bp_info = mempool_to_bpinfo(pool);
 	if (!(bp_info->bp_list)) {
-		RTE_LOG(ERR, PMD, "DPAA2 buffer pool not configured");
+		RTE_LOG(ERR, PMD, "DPAA2 buffer pool not configured\n");
 		return -ENOENT;
 	}
 	rte_dpaa2_mbuf_release(pool, obj_table, bp_info->bpid,
@@ -341,7 +341,7 @@ rte_hw_mbuf_get_count(const struct rte_mempool *mp)
 	struct dpaa2_dpbp_dev *dpbp_node;
 
 	if (!mp || !mp->pool_data) {
-		RTE_LOG(ERR, PMD, "Invalid mempool provided");
+		RTE_LOG(ERR, PMD, "Invalid mempool provided\n");
 		return 0;
 	}
 
@@ -351,12 +351,12 @@ rte_hw_mbuf_get_count(const struct rte_mempool *mp)
 	ret = dpbp_get_num_free_bufs(&dpbp_node->dpbp, CMD_PRI_LOW,
 				     dpbp_node->token, &num_of_bufs);
 	if (ret) {
-		RTE_LOG(ERR, PMD, "Unable to obtain free buf count (err=%d)",
+		RTE_LOG(ERR, PMD, "Unable to obtain free buf count (err=%d)\n",
 			ret);
 		return 0;
 	}
 
-	RTE_LOG(DEBUG, PMD, "Free bufs = %u", num_of_bufs);
+	RTE_LOG(DEBUG, PMD, "Free bufs = %u\n", num_of_bufs);
 
 	return num_of_bufs;
 }
diff --git a/drivers/net/dpaa2/base/dpaa2_hw_dpni.c b/drivers/net/dpaa2/base/dpaa2_hw_dpni.c
index f3ac0694a6..5aa12db944 100644
--- a/drivers/net/dpaa2/base/dpaa2_hw_dpni.c
+++ b/drivers/net/dpaa2/base/dpaa2_hw_dpni.c
@@ -91,8 +91,9 @@ dpaa2_setup_flow_dist(struct rte_eth_dev *eth_dev,
 				  &tc_cfg);
 	rte_free(p_params);
 	if (ret) {
-		RTE_LOG(ERR, PMD, "Setting distribution for Rx failed with"
-			" err code: %d\n", ret);
+		RTE_LOG(ERR, PMD,
+			"Setting distribution for Rx failed with err: %d\n",
+			ret);
 		return ret;
 	}
 
@@ -134,8 +135,9 @@ int dpaa2_remove_flow_dist(
 				  &tc_cfg);
 	rte_free(p_params);
 	if (ret) {
-		RTE_LOG(ERR, PMD, "Setting distribution for Rx failed with"
-			" err code: %d\n", ret);
+		RTE_LOG(ERR, PMD,
+			"Setting distribution for Rx failed with err: %d\n",
+			ret);
 		return ret;
 	}
 	return ret;
diff --git a/drivers/net/dpaa2/dpaa2_ethdev.c b/drivers/net/dpaa2/dpaa2_ethdev.c
index 9666d9d4c5..44a5bc2bdb 100644
--- a/drivers/net/dpaa2/dpaa2_ethdev.c
+++ b/drivers/net/dpaa2/dpaa2_ethdev.c
@@ -121,7 +121,7 @@ dpaa2_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL");
+		RTE_LOG(ERR, PMD, "dpni is NULL\n");
 		return -1;
 	}
 
@@ -156,7 +156,7 @@ dpaa2_vlan_offload_set(struct rte_eth_dev *dev, int mask)
 			ret = dpni_enable_vlan_filter(dpni, CMD_PRI_LOW,
 						      priv->token, false);
 		if (ret < 0)
-			RTE_LOG(ERR, PMD, "Unable to set vlan filter ret = %d",
+			RTE_LOG(ERR, PMD, "Unable to set vlan filter = %d\n",
 				ret);
 	}
 }
@@ -721,17 +721,17 @@ dpaa2_dev_promiscuous_enable(
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL");
+		RTE_LOG(ERR, PMD, "dpni is NULL\n");
 		return;
 	}
 
 	ret = dpni_set_unicast_promisc(dpni, CMD_PRI_LOW, priv->token, true);
 	if (ret < 0)
-		RTE_LOG(ERR, PMD, "Unable to enable U promisc mode %d", ret);
+		RTE_LOG(ERR, PMD, "Unable to enable U promisc mode %d\n", ret);
 
 	ret = dpni_set_multicast_promisc(dpni, CMD_PRI_LOW, priv->token, true);
 	if (ret < 0)
-		RTE_LOG(ERR, PMD, "Unable to enable M promisc mode %d", ret);
+		RTE_LOG(ERR, PMD, "Unable to enable M promisc mode %d\n", ret);
 }
 
 static void
@@ -745,19 +745,20 @@ dpaa2_dev_promiscuous_disable(
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL");
+		RTE_LOG(ERR, PMD, "dpni is NULL\n");
 		return;
 	}
 
 	ret = dpni_set_unicast_promisc(dpni, CMD_PRI_LOW, priv->token, false);
 	if (ret < 0)
-		RTE_LOG(ERR, PMD, "Unable to disable U promisc mode %d", ret);
+		RTE_LOG(ERR, PMD, "Unable to disable U promisc mode %d\n", ret);
 
 	if (dev->data->all_multicast == 0) {
 		ret = dpni_set_multicast_promisc(dpni, CMD_PRI_LOW,
 						 priv->token, false);
 		if (ret < 0)
-			RTE_LOG(ERR, PMD, "Unable to disable M promisc mode %d",
+			RTE_LOG(ERR, PMD,
+				"Unable to disable M promisc mode %d\n",
 				ret);
 	}
 }
@@ -773,13 +774,13 @@ dpaa2_dev_allmulticast_enable(
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL");
+		RTE_LOG(ERR, PMD, "dpni is NULL\n");
 		return;
 	}
 
 	ret = dpni_set_multicast_promisc(dpni, CMD_PRI_LOW, priv->token, true);
 	if (ret < 0)
-		RTE_LOG(ERR, PMD, "Unable to enable multicast mode %d", ret);
+		RTE_LOG(ERR, PMD, "Unable to enable multicast mode %d\n", ret);
 }
 
 static void
@@ -792,7 +793,7 @@ dpaa2_dev_allmulticast_disable(struct rte_eth_dev *dev)
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL");
+		RTE_LOG(ERR, PMD, "dpni is NULL\n");
 		return;
 	}
 
@@ -802,7 +803,7 @@ dpaa2_dev_allmulticast_disable(struct rte_eth_dev *dev)
 
 	ret = dpni_set_multicast_promisc(dpni, CMD_PRI_LOW, priv->token, false);
 	if (ret < 0)
-		RTE_LOG(ERR, PMD, "Unable to disable multicast mode %d", ret);
+		RTE_LOG(ERR, PMD, "Unable to disable multicast mode %d\n", ret);
 }
 
 static int
@@ -816,7 +817,7 @@ dpaa2_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL");
+		RTE_LOG(ERR, PMD, "dpni is NULL\n");
 		return -EINVAL;
 	}
 
@@ -855,15 +856,15 @@ dpaa2_dev_add_mac_addr(struct rte_eth_dev *dev,
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL");
+		RTE_LOG(ERR, PMD, "dpni is NULL\n");
 		return -1;
 	}
 
 	ret = dpni_add_mac_addr(dpni, CMD_PRI_LOW,
 				priv->token, addr->addr_bytes);
 	if (ret)
-		RTE_LOG(ERR, PMD, "error: Adding the MAC ADDR failed:"
-			" err = %d", ret);
+		RTE_LOG(ERR, PMD,
+			"error: Adding the MAC ADDR failed: err = %d\n", ret);
 	return 0;
 }
 
@@ -882,15 +883,15 @@ dpaa2_dev_remove_mac_addr(struct rte_eth_dev *dev,
 	macaddr = &data->mac_addrs[index];
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL");
+		RTE_LOG(ERR, PMD, "dpni is NULL\n");
 		return;
 	}
 
 	ret = dpni_remove_mac_addr(dpni, CMD_PRI_LOW,
 				   priv->token, macaddr->addr_bytes);
 	if (ret)
-		RTE_LOG(ERR, PMD, "error: Removing the MAC ADDR failed:"
-			" err = %d", ret);
+		RTE_LOG(ERR, PMD,
+			"error: Removing the MAC ADDR failed: err = %d\n", ret);
 }
 
 static void
@@ -904,7 +905,7 @@ dpaa2_dev_set_mac_addr(struct rte_eth_dev *dev,
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL");
+		RTE_LOG(ERR, PMD, "dpni is NULL\n");
 		return;
 	}
 
@@ -912,7 +913,8 @@ dpaa2_dev_set_mac_addr(struct rte_eth_dev *dev,
 					priv->token, addr->addr_bytes);
 
 	if (ret)
-		RTE_LOG(ERR, PMD, "error: Setting the MAC ADDR failed %d", ret);
+		RTE_LOG(ERR, PMD,
+			"error: Setting the MAC ADDR failed %d\n", ret);
 }
 static
 void dpaa2_dev_stats_get(struct rte_eth_dev *dev,
@@ -929,12 +931,12 @@ void dpaa2_dev_stats_get(struct rte_eth_dev *dev,
 	PMD_INIT_FUNC_TRACE();
 
 	if (!dpni) {
-		RTE_LOG(ERR, PMD, "dpni is NULL");
+		RTE_LOG(ERR, PMD, "dpni is NULL\n");
 		return;
 	}
 
 	if (!stats) {
-		RTE_LOG(ERR, PMD, "stats is NULL");
+		RTE_LOG(ERR, PMD, "stats is NULL\n");
 		return;
 	}
 
@@ -987,7 +989,7 @@ void dpaa2_dev_stats_reset(struct rte_eth_dev *dev)
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL");
+		RTE_LOG(ERR, PMD, "dpni is NULL\n");
 		return;
 	}
 
@@ -1016,7 +1018,7 @@ dpaa2_dev_link_update(struct rte_eth_dev *dev,
 	PMD_INIT_FUNC_TRACE();
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "error : dpni is NULL");
+		RTE_LOG(ERR, PMD, "dpni is NULL\n");
 		return 0;
 	}
 	memset(&old, 0, sizeof(old));
@@ -1024,7 +1026,7 @@ dpaa2_dev_link_update(struct rte_eth_dev *dev,
 
 	ret = dpni_get_link_state(dpni, CMD_PRI_LOW, priv->token, &state);
 	if (ret < 0) {
-		RTE_LOG(ERR, PMD, "error: dpni_get_link_state %d", ret);
+		RTE_LOG(ERR, PMD, "error: dpni_get_link_state %d\n", ret);
 		return -1;
 	}
 
@@ -1069,7 +1071,7 @@ dpaa2_dev_set_link_up(struct rte_eth_dev *dev)
 	dpni = (struct fsl_mc_io *)priv->hw;
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "Device has not yet been configured");
+		RTE_LOG(ERR, PMD, "DPNI is NULL\n");
 		return ret;
 	}
 
@@ -1116,7 +1118,7 @@ dpaa2_dev_set_link_down(struct rte_eth_dev *dev)
 	dpni = (struct fsl_mc_io *)priv->hw;
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "Device has not yet been configured");
+		RTE_LOG(ERR, PMD, "Device has not yet been configured\n");
 		return ret;
 	}
 
@@ -1170,13 +1172,13 @@ dpaa2_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	dpni = (struct fsl_mc_io *)priv->hw;
 
 	if (dpni == NULL || fc_conf == NULL) {
-		RTE_LOG(ERR, PMD, "device not configured");
+		RTE_LOG(ERR, PMD, "device not configured\n");
 		return ret;
 	}
 
 	ret = dpni_get_link_state(dpni, CMD_PRI_LOW, priv->token, &state);
 	if (ret) {
-		RTE_LOG(ERR, PMD, "error: dpni_get_link_state %d", ret);
+		RTE_LOG(ERR, PMD, "error: dpni_get_link_state %d\n", ret);
 		return ret;
 	}
 
@@ -1226,7 +1228,7 @@ dpaa2_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	dpni = (struct fsl_mc_io *)priv->hw;
 
 	if (dpni == NULL) {
-		RTE_LOG(ERR, PMD, "dpni is NULL");
+		RTE_LOG(ERR, PMD, "dpni is NULL\n");
 		return ret;
 	}
 
@@ -1236,7 +1238,7 @@ dpaa2_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	 */
 	ret = dpni_get_link_state(dpni, CMD_PRI_LOW, priv->token, &state);
 	if (ret) {
-		RTE_LOG(ERR, PMD, "Unable to get link state (err=%d)", ret);
+		RTE_LOG(ERR, PMD, "Unable to get link state (err=%d)\n", ret);
 		return -1;
 	}
 
@@ -1281,14 +1283,15 @@ dpaa2_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 		cfg.options &= ~DPNI_LINK_OPT_ASYM_PAUSE;
 		break;
 	default:
-		RTE_LOG(ERR, PMD, "Incorrect Flow control flag (%d)",
+		RTE_LOG(ERR, PMD, "Incorrect Flow control flag (%d)\n",
 			fc_conf->mode);
 		return -1;
 	}
 
 	ret = dpni_set_link_cfg(dpni, CMD_PRI_LOW, priv->token, &cfg);
 	if (ret)
-		RTE_LOG(ERR, PMD, "Unable to set Link configuration (err=%d)",
+		RTE_LOG(ERR, PMD,
+			"Unable to set Link configuration (err=%d)\n",
 			ret);
 
 	/* Enable link */