From: Bruce Richardson Date: Thu, 28 Nov 2019 16:33:50 +0000 (+0000) Subject: doc: update example output in FreeBSD guide X-Git-Url: http://git.droids-corp.org/?p=dpdk.git;a=commitdiff_plain;h=e21ee74082f2b5b358e83fc2df879c2486d633a3 doc: update example output in FreeBSD guide The output of running the helloworld example on FreeBSD was a little out-of-date and can be shortened by using the latest version of DPDK. Update appropriately. Signed-off-by: Bruce Richardson Acked-by: Anatoly Burakov --- diff --git a/doc/guides/freebsd_gsg/install_from_ports.rst b/doc/guides/freebsd_gsg/install_from_ports.rst index 4b04475842..29f16cc6c5 100644 --- a/doc/guides/freebsd_gsg/install_from_ports.rst +++ b/doc/guides/freebsd_gsg/install_from_ports.rst @@ -84,48 +84,36 @@ compiled and run as below: INSTALL-APP helloworld INSTALL-MAP helloworld.map - sudo ./build/helloworld -l 0-3 -n 2 - - EAL: Contigmem driver has 2 buffers, each of size 1GB + sudo ./build//helloworld -l 0-3 EAL: Sysctl reports 8 cpus - EAL: Detected lcore 0 - EAL: Detected lcore 1 - EAL: Detected lcore 2 - EAL: Detected lcore 3 - EAL: Support maximum 64 logical core(s) by configuration. - EAL: Detected 4 lcore(s) - EAL: Setting up physically contiguous memory... - EAL: Mapped memory segment 1 @ 0x802400000: len 1073741824 - EAL: Mapped memory segment 2 @ 0x842400000: len 1073741824 - EAL: WARNING: clock_gettime cannot use CLOCK_MONOTONIC_RAW and HPET - is not available - clock timings may be less accurate. - EAL: TSC frequency is ~3569023 KHz - EAL: PCI scan found 24 devices - EAL: Master core 0 is ready (tid=0x802006400) - EAL: Core 1 is ready (tid=0x802006800) - EAL: Core 3 is ready (tid=0x802007000) - EAL: Core 2 is ready (tid=0x802006c00) + EAL: Detected 8 lcore(s) + EAL: Detected 1 NUMA nodes + EAL: Multi-process socket /var/run/dpdk/rte/mp_socket + EAL: Selected IOVA mode 'PA' + EAL: Contigmem driver has 2 buffers, each of size 1GB + EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x180000000, len 1073741824 + EAL: Mapped memory segment 1 @ 0x1080000000: physaddr:0x1c0000000, len 1073741824 + EAL: PCI device 0000:00:19.0 on NUMA socket 0 + EAL: probe driver: 8086:153b net_e1000_em + EAL: 0000:00:19.0 not managed by UIO driver, skipping EAL: PCI device 0000:01:00.0 on NUMA socket 0 - EAL: probe driver: 8086:10fb rte_ixgbe_pmd - EAL: PCI memory mapped at 0x80074a000 - EAL: PCI memory mapped at 0x8007ca000 + EAL: probe driver: 8086:1572 net_i40e + EAL: 0000:01:00.0 not managed by UIO driver, skipping EAL: PCI device 0000:01:00.1 on NUMA socket 0 - EAL: probe driver: 8086:10fb rte_ixgbe_pmd - EAL: PCI memory mapped at 0x8007ce000 - EAL: PCI memory mapped at 0x80084e000 - EAL: PCI device 0000:02:00.0 on NUMA socket 0 - EAL: probe driver: 8086:10fb rte_ixgbe_pmd - EAL: PCI memory mapped at 0x800852000 - EAL: PCI memory mapped at 0x8008d2000 - EAL: PCI device 0000:02:00.1 on NUMA socket 0 - EAL: probe driver: 8086:10fb rte_ixgbe_pmd - EAL: PCI memory mapped at 0x801b3f000 - EAL: PCI memory mapped at 0x8008d6000 + EAL: probe driver: 8086:1572 net_i40e + EAL: 0000:01:00.1 not managed by UIO driver, skipping + EAL: PCI device 0000:01:00.2 on NUMA socket 0 + EAL: probe driver: 8086:1572 net_i40e + EAL: 0000:01:00.2 not managed by UIO driver, skipping + EAL: PCI device 0000:01:00.3 on NUMA socket 0 + EAL: probe driver: 8086:1572 net_i40e + EAL: 0000:01:00.3 not managed by UIO driver, skipping hello from core 1 hello from core 2 hello from core 3 hello from core 0 + .. note:: To run a DPDK process as a non-root user, adjust the permissions on