From b1b700ce7d6fe0db9152f73e8e00394fc2756e60 Mon Sep 17 00:00:00 2001 From: Olivier Matz Date: Wed, 29 Mar 2017 10:36:28 +0200 Subject: [PATCH] ethdev: add descriptor status API Introduce a new API to get the status of a descriptor. For Rx, it is almost similar to rx_descriptor_done API, except it differentiates "used" descriptors (which are hold by the driver and not returned to the hardware). For Tx, it is a new API. The descriptor_done() API, and probably the rx_queue_count() API could be replaced by this new API as soon as it is implemented on all PMDs. Signed-off-by: Olivier Matz Reviewed-by: Andrew Rybchenko --- doc/guides/nics/features/default.ini | 2 + doc/guides/rel_notes/release_17_05.rst | 8 ++ lib/librte_ether/rte_ethdev.h | 125 +++++++++++++++++++++++++ 3 files changed, 135 insertions(+) diff --git a/doc/guides/nics/features/default.ini b/doc/guides/nics/features/default.ini index 0135c0c4e5..b1b9114dc6 100644 --- a/doc/guides/nics/features/default.ini +++ b/doc/guides/nics/features/default.ini @@ -51,6 +51,8 @@ Inner L3 checksum = Inner L4 checksum = Packet type parsing = Timesync = +Rx descriptor status = +Tx descriptor status = Basic stats = Extended stats = Stats per queue = diff --git a/doc/guides/rel_notes/release_17_05.rst b/doc/guides/rel_notes/release_17_05.rst index c67e468a1f..a4ee81538b 100644 --- a/doc/guides/rel_notes/release_17_05.rst +++ b/doc/guides/rel_notes/release_17_05.rst @@ -47,6 +47,14 @@ New Features to request the driver to release mbufs from their Tx ring that are no longer in use, independent of whether or not the ``tx_rs_thresh`` has been crossed. +* **Added descriptor status ethdev API.** + + Added a new API to get the status of a descriptor. + + For Rx, it is almost similar to the ``rx_descriptor_done`` API, except + it differentiates descriptors which are hold by the driver and not + returned to the hardware. For Tx, it is a new API. + * **Increased number of next hops for LPM IPv6 to 2^21.** The next_hop field is extended from 8 bits to 21 bits for IPv6. diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h index b3ee8728b9..71a35f2420 100644 --- a/lib/librte_ether/rte_ethdev.h +++ b/lib/librte_ether/rte_ethdev.h @@ -1179,6 +1179,12 @@ typedef uint32_t (*eth_rx_queue_count_t)(struct rte_eth_dev *dev, typedef int (*eth_rx_descriptor_done_t)(void *rxq, uint16_t offset); /**< @internal Check DD bit of specific RX descriptor */ +typedef int (*eth_rx_descriptor_status_t)(void *rxq, uint16_t offset); +/**< @internal Check the status of a Rx descriptor */ + +typedef int (*eth_tx_descriptor_status_t)(void *txq, uint16_t offset); +/**< @internal Check the status of a Tx descriptor */ + typedef int (*eth_fw_version_get_t)(struct rte_eth_dev *dev, char *fw_version, size_t fw_size); /**< @internal Get firmware information of an Ethernet device. */ @@ -1487,6 +1493,10 @@ struct eth_dev_ops { eth_rx_queue_count_t rx_queue_count; /**< Get the number of used RX descriptors. */ eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit. */ + eth_rx_descriptor_status_t rx_descriptor_status; + /**< Check the status of a Rx descriptor. */ + eth_tx_descriptor_status_t tx_descriptor_status; + /**< Check the status of a Tx descriptor. */ eth_rx_enable_intr_t rx_queue_intr_enable; /**< Enable Rx queue interrupt. */ eth_rx_disable_intr_t rx_queue_intr_disable; /**< Disable Rx queue interrupt. */ eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue. */ @@ -2778,6 +2788,121 @@ rte_eth_rx_descriptor_done(uint8_t port_id, uint16_t queue_id, uint16_t offset) dev->data->rx_queues[queue_id], offset); } +#define RTE_ETH_RX_DESC_AVAIL 0 /**< Desc available for hw. */ +#define RTE_ETH_RX_DESC_DONE 1 /**< Desc done, filled by hw. */ +#define RTE_ETH_RX_DESC_UNAVAIL 2 /**< Desc used by driver or hw. */ + +/** + * Check the status of a Rx descriptor in the queue + * + * It should be called in a similar context than the Rx function: + * - on a dataplane core + * - not concurrently on the same queue + * + * Since it's a dataplane function, no check is performed on port_id and + * queue_id. The caller must therefore ensure that the port is enabled + * and the queue is configured and running. + * + * Note: accessing to a random descriptor in the ring may trigger cache + * misses and have a performance impact. + * + * @param port_id + * A valid port identifier of the Ethernet device which. + * @param queue_id + * A valid Rx queue identifier on this port. + * @param offset + * The offset of the descriptor starting from tail (0 is the next + * packet to be received by the driver). + * + * @return + * - (RTE_ETH_RX_DESC_AVAIL): Descriptor is available for the hardware to + * receive a packet. + * - (RTE_ETH_RX_DESC_DONE): Descriptor is done, it is filled by hw, but + * not yet processed by the driver (i.e. in the receive queue). + * - (RTE_ETH_RX_DESC_UNAVAIL): Descriptor is unavailable, either hold by + * the driver and not yet returned to hw, or reserved by the hw. + * - (-EINVAL) bad descriptor offset. + * - (-ENOTSUP) if the device does not support this function. + * - (-ENODEV) bad port or queue (only if compiled with debug). + */ +static inline int +rte_eth_rx_descriptor_status(uint8_t port_id, uint16_t queue_id, + uint16_t offset) +{ + struct rte_eth_dev *dev; + void *rxq; + +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); +#endif + dev = &rte_eth_devices[port_id]; +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + if (queue_id >= dev->data->nb_rx_queues) + return -ENODEV; +#endif + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_descriptor_status, -ENOTSUP); + rxq = dev->data->rx_queues[queue_id]; + + return (*dev->dev_ops->rx_descriptor_status)(rxq, offset); +} + +#define RTE_ETH_TX_DESC_FULL 0 /**< Desc filled for hw, waiting xmit. */ +#define RTE_ETH_TX_DESC_DONE 1 /**< Desc done, packet is transmitted. */ +#define RTE_ETH_TX_DESC_UNAVAIL 2 /**< Desc used by driver or hw. */ + +/** + * Check the status of a Tx descriptor in the queue. + * + * It should be called in a similar context than the Tx function: + * - on a dataplane core + * - not concurrently on the same queue + * + * Since it's a dataplane function, no check is performed on port_id and + * queue_id. The caller must therefore ensure that the port is enabled + * and the queue is configured and running. + * + * Note: accessing to a random descriptor in the ring may trigger cache + * misses and have a performance impact. + * + * @param port_id + * A valid port identifier of the Ethernet device which. + * @param queue_id + * A valid Tx queue identifier on this port. + * @param offset + * The offset of the descriptor starting from tail (0 is the place where + * the next packet will be send). + * + * @return + * - (RTE_ETH_TX_DESC_FULL) Descriptor is being processed by the hw, i.e. + * in the transmit queue. + * - (RTE_ETH_TX_DESC_DONE) Hardware is done with this descriptor, it can + * be reused by the driver. + * - (RTE_ETH_TX_DESC_UNAVAIL): Descriptor is unavailable, reserved by the + * driver or the hardware. + * - (-EINVAL) bad descriptor offset. + * - (-ENOTSUP) if the device does not support this function. + * - (-ENODEV) bad port or queue (only if compiled with debug). + */ +static inline int rte_eth_tx_descriptor_status(uint8_t port_id, + uint16_t queue_id, uint16_t offset) +{ + struct rte_eth_dev *dev; + void *txq; + +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); +#endif + dev = &rte_eth_devices[port_id]; +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + if (queue_id >= dev->data->nb_tx_queues) + return -ENODEV; +#endif + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_descriptor_status, -ENOTSUP); + txq = dev->data->tx_queues[queue_id]; + + return (*dev->dev_ops->tx_descriptor_status)(txq, offset); +} + /** * Send a burst of output packets on a transmit queue of an Ethernet device. * -- 2.20.1