>Name >Value >Name >Value >NAME >VALUE >Name >Value >NAME >VALUE >NAME >VALUE CAPACITOR chip >NAME >VALUE >Name >Value >Name >Value >NAME >VALUE >NAME >VALUE CTZ3 Series land pattern for variable capacitor - CTZ3E-50C-W1-PF >NAME >VALUE <h3>CAP-PTH-SMALL-KIT</h3> Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571). Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. >Name >Value RESISTOR chip >NAME >VALUE >NAME >VALUE CAPACITOR chip >NAME >VALUE 1/6W Thru-hole Resistor - *UNPROVEN* >NAME >VALUE >NAME >VALUE 1/4W Resistor, 0.4" wide Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value 1/2W Resistor, 0.5" wide Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value 1W Resistor, 0.6" wide Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value 2W Resistor, 0.8" wide Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value <h3>AXIAL-0.3-KIT</h3> Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes. Warning: This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. >Name >Value SOT-23 >NAME >VALUE >NAME >VALUE TO 92 >NAME >VALUE SOT-223 >NAME >VALUE >NAME >VALUE >NAME >VALUE BUZZER >NAME >VALUE >NAME >VALUE + <h3>BUZZER-12MM-NS-KIT</h3> Through-hole buzzer Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. >NAME >VALUE + <h3>BUZZER-CCV-KIT</h3> SMD Buzzer Warning: This is the KIT version of this package. This package has longer pads to aid in hand soldering. DPAK PLASTIC PACKAGE CASE 369C-01 Source: http://www.onsemi.co.jp .. LM317M-D.PDF >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. >NAME >VALUE >NAME >VALUE >NAME >VALUE >Name >Value + - S S >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >Name >Value + - S >NAME >VALUE >NAME >VALUE >Name >Value >NAME >VALUE >NAME >Value OMRON SWITCH >NAME >NAME >Value Sparkfun SKU# COM-08229 >NAME >VALUE DPDT Slide Switch SMD www.SparkFun.com SKU : Comp-SMDS >Name >Value MSS22 DPDT Switch >NAME >VALUE Series S Slide Switch Right Angle Slide Switch. Works with part#ES21MABE >NAME >VALUE >NAME >VALUE Switch with part number: GPI-152-3013 LED 5 mm, round >NAME >VALUE LED 3 mm, round >NAME >VALUE >NAME >VALUE >NAME >VALUE L S >NAME >VALUE <h3>LED 3MM - No Silk</h3> 3 mm, round >NAME >VALUE <h3>LED5MM-KIT</h3> 5MM Through-hole LED Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE ADJ IN OUT >VALUE >VALUE >VALUE >NAME >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE Capacitor Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. Resistor Basic schematic elements and footprints for 0603, 1206, and PTH resistors. Transistor NPN BJT configuration in SOT23 package. MMBT2222 is the common NPN we use. Double check BCE configuration again layout. Buzzer 12mm Spark Fun Electronics SKU : Comp-Buzzer Voltage Regulator Standard LM317 adjustable voltage regulator. AOI (Adjust Output Input). Google 'LM317 Calculator' for easy to use app to get the two resistor values needed. 240/720 for 5V output. 240/390 for 3.3V output. Spark Fun Electronics SKU : COM-00527 SUPPLY SYMBOL SUPPLY SYMBOL Header 4 Standard 4-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208 Header 3 Standard 3-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08232 with associated crimp pins and housings. DPDT Version of the COM-00597 LEDs Standard schematic elements and footprints for 5mm, 3mm, 1206, and 0603 sized LEDs. 5mm - Spark Fun Electronics SKU : COM-00529 (and others) Dual In Line >NAME >VALUE 8S1 8-lead (0.150" Wide Body) Plastic Gull Wing Small Outline (JEDEC SOIC) Source: http://www.atmel.com/dyn/resources/prod_documents/2535S.pdf >NAME >VALUE 8S2 8-lead, 0.208 Body Plastic Small Outline Package (EIAJ) Source: http://www.atmel.com/dyn/resources/prod_documents/2535S.pdf >NAME >VALUE >NAME >VALUE 8-bit AVR Microcontroller with 1K Bytes In-System Programmable Flash Source: http://www.atmel.com/dyn/resources/prod_documents/2535S.pdf POTENTIOMETER Beckman Helitrim 25 >NAME >VALUE 3 1 POTENTIOMETER Beckman Helitrim 25 >NAME >VALUE 3 1 POTENTIOMETER Beckman Helitrim 25 >NAME >VALUE 3 1 3 POTENTIOMETER Beckman Helitrim 25 >NAME >VALUE 3 1 3 POTENTIOMETER Beckman Helitrim 64 >NAME >VALUE 3 1 3 POTENTIOMETER Beckman Helitrim 64 >NAME >VALUE 1 3 POTENTIOMETER >NAME >VALUE 1 3 2 3 1 POTENTIOMETER distributor Schukat >NAME >VALUE POTENTIOMETER distributor Schukat >NAME >VALUE POTENTIOMETER distributor Schukat >NAME >VALUE POTENTIOMETER distributor Schukat >NAME >VALUE POTENTIOMETER distributor Schukat >NAME >VALUE POTENTIOMETER distributor Schukat >NAME >VALUE POTENTIOMETER Copal >NAME >VALUE 3 1 POTENTIOMETER >NAME >VALUE POTENTIOMETER >NAME >VALUE POTENTIOMETER Piher >NAME >VALUE POTENTIOMETER Piher >NAME >VALUE POTENTIOMETER Copal 3 1 >NAME >VALUE POTENTIOMETER Copal >NAME >VALUE 3 1 3 POTENTIOMETER Copal >NAME >VALUE 1 3 3 POTENTIOMETER Copal >NAME >VALUE 1 3 POTENTIOMETER Spectrol >NAME >VALUE 63P 1 3 3 POTENTIOMETER Spectrol >NAME >VALUE 3 1 3 POTENTIOMETER Spectrol >NAME >VALUE 3 1 3 POTENTIOMETER Spectrol >NAME >VALUE 3 1 3 POTENTIOMETER Spectrol >NAME >VALUE 3 1 3 POTENTIOMETER 3 1 >NAME >VALUE POTENTIOMETER >NAME >VALUE 3 1 POTENTIOMETER Piher >NAME >VALUE POTENTIOMETER Piher >NAME >VALUE POTENTIOMETER >NAME >VALUE 1 3 2 1 3 POTENTIOMETER >NAME >VALUE POTENTIOMETER >NAME >VALUE POTENTIOMETER >NAME >VALUE Carbon Rotary Potentiometers - 20 mm size Source: Radiohm .. RAD.pdf >NAME >VALUE Carbon Rotary Potentiometers - 20 mm size Source: Radiohm .. RAD.pdf >NAME >VALUE COPAL ELECTRONICS SM-42/43 SURFACE MOUNT TRIMMERS Side adjustmet Source: smt-pots.pdf >NAME >VALUE COPAL ELECTRONICS SM-42/43 SURFACE MOUNT TRIMMERS Side adjustmet Source: smt-pots.pdf >NAME >VALUE COPAL ELECTRONICS SM-42/43 SURFACE MOUNT TRIMMERS Top adjustmet Source: smt-pots.pdf >NAME >VALUE COPAL ELECTRONICS SM-42/43 SURFACE MOUNT TRIMMERS Top adjustmet Source: smt-pots.pdf >NAME >VALUE 3 mm SMD Trimming Potentiometer Side Adjust Source: http://www.bourns.com/data/global/PDFs/3223.PDF >NAME >VALUE 3 mm SMD Trimming Potentiometer Side Adjust Source: http://www.bourns.com/data/global/PDFs/3223.PDF >NAME >VALUE 3 mm SMD Trimming Potentiometer Top Adjust Source: http://www.bourns.com/data/global/PDFs/3223.PDF >NAME >VALUE >NAME >VALUE POTENTIOMETER >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL FEMALE SMA CONNECTOR Radiall distributor RS 193-9117 >NAME >VALUE >VALUE >NAME >NAME FEMALE SMA CONNECTOR Radiall distributor RS 193-9117 battery connector Radio DRA887TX VCC is the supply for radio 7.6V 7.6V 7.6V 7.6V 3.8V 3.8V 4V to 6V (real range 1.25 to 7.5) 4V to 6V Software reset & control Power supply Buzzer Vout = 1.25 * (1 + R5/R6)