Generated by EAGLE CAM Processor 6.4.0 Photoplotter Info File: /home/zer0/eagle/xbee-elec/fpv_debugboard/fpv_debugboard.gpi Date : 7/12/13 6:25 PM Plotfile : /home/zer0/eagle/xbee-elec/fpv_debugboard/fpv_debugboard.GTL Apertures : generated: Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch Parameter settings: Emulate Apertures : no Tolerance Draw + : 0.00 % Tolerance Draw - : 0.00 % Tolerance Flash + : 0.00 % Tolerance Flash - : 0.00 % Rotate : no Mirror : no Optimize : yes Auto fit : yes OffsetX : 0inch OffsetY : 0inch Plotfile Info: Coordinate Format : 2.4 Coordinate Units : Inch Data Mode : Absolute Zero Suppression : None End Of Block : * Apertures used: Code Shape Size used D10 draw 0.0100inch 3 D11 draw 0.0120inch 282 D12 rectangle 0.0118inch x 0.0315inch 16 D13 rectangle 0.0945inch x 0.0866inch 2 D14 rectangle 0.0512inch x 0.0335inch 2 D15 octagon 0.0740inch 31 D16 square 0.0740inch 1 D17 round 0.0740inch 5 D18 rectangle 0.0472inch x 0.0315inch 24 D19 rectangle 0.0315inch x 0.0472inch 10 D20 rectangle 0.0551inch x 0.0472inch 6 D21 rectangle 0.0137inch x 0.0550inch 28 D22 rectangle 0.0197inch x 0.0984inch 5 D23 rectangle 0.0787inch x 0.0984inch 4 D24 draw 0.0000inch 2 D25 rectangle 0.0472inch x 0.0551inch 4 D26 rectangle 0.0630inch x 0.0551inch 2 D27 round 0.0356inch 38