update debug board... but what ?

[protos/xbee-elec.git] / fpv_debugboard / fpv_debugboard.s#7

diff --git a/fpv_debugboard/fpv_debugboard.s#7 b/fpv_debugboard/fpv_debugboard.s#7
index f46fb67..24b1a28 100644 (file)
--- a/fpv_debugboard/fpv_debugboard.s#7
+++ b/fpv_debugboard/fpv_debugboard.s#7
@@ -2448,6 +2448,283 @@ Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.
 <text x="-2.54" y="1.381" size="0.4064" layer="25">&gt;NAME</text>
 <text x="0.408" y="1.332" size="0.4064" layer="27">&gt;VALUE</text>
 </package>
+<package name="1X03">
+<wire x1="3.81" y1="0.635" x2="4.445" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="4.445" y1="1.27" x2="5.715" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="5.715" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="-0.635" x2="5.715" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="5.715" y1="-1.27" x2="4.445" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="4.445" y1="-1.27" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="-1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="-1.27" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="0.635" x2="6.35" y2="-0.635" width="0.2032" layer="21"/>
+<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="3" x="5.08" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<text x="-1.3462" y="1.8288" size="1.27" layer="25" ratio="10">&gt;NAME</text>
+<text x="-1.27" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
+<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+</package>
+<package name="MOLEX-1X3">
+<wire x1="-1.27" y1="3.048" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="6.35" y1="3.048" x2="6.35" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="6.35" y1="3.048" x2="-1.27" y2="3.048" width="0.127" layer="21"/>
+<wire x1="6.35" y1="-2.54" x2="5.08" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="5.08" y1="-2.54" x2="0" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="0" y1="-2.54" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="0" y1="-2.54" x2="0" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="0" y1="-1.27" x2="5.08" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="5.08" y1="-1.27" x2="5.08" y2="-2.54" width="0.127" layer="21"/>
+<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" shape="square"/>
+<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796"/>
+<pad name="3" x="5.08" y="0" drill="1.016" diameter="1.8796"/>
+</package>
+<package name="SCREWTERMINAL-3.5MM-3">
+<wire x1="-2.3" y1="3.4" x2="9.3" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="9.3" y1="3.4" x2="9.3" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="9.3" y1="-2.8" x2="9.3" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="9.3" y1="-3.6" x2="-2.3" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="-2.3" y1="-3.6" x2="-2.3" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-2.3" y1="-2.8" x2="-2.3" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="9.3" y1="-2.8" x2="-2.3" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-2.3" y1="-1.35" x2="-2.7" y2="-1.35" width="0.2032" layer="51"/>
+<wire x1="-2.7" y1="-1.35" x2="-2.7" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="-2.7" y1="-2.35" x2="-2.3" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="9.3" y1="3.15" x2="9.7" y2="3.15" width="0.2032" layer="51"/>
+<wire x1="9.7" y1="3.15" x2="9.7" y2="2.15" width="0.2032" layer="51"/>
+<wire x1="9.7" y1="2.15" x2="9.3" y2="2.15" width="0.2032" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.2" diameter="2.413" shape="square"/>
+<pad name="2" x="3.5" y="0" drill="1.2" diameter="2.413"/>
+<pad name="3" x="7" y="0" drill="1.2" diameter="2.413"/>
+<text x="-1.27" y="2.54" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-1.27" y="1.27" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
+<package name="1X03_LOCK">
+<wire x1="3.81" y1="0.635" x2="4.445" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="4.445" y1="1.27" x2="5.715" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="5.715" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="-0.635" x2="5.715" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="5.715" y1="-1.27" x2="4.445" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="4.445" y1="-1.27" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="-1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="-1.27" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="0.635" x2="6.35" y2="-0.635" width="0.2032" layer="21"/>
+<pad name="1" x="0" y="0.127" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.54" y="-0.127" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="3" x="5.08" y="0.127" drill="1.016" diameter="1.8796" rot="R90"/>
+<text x="-1.3462" y="1.8288" size="1.27" layer="25" ratio="10">&gt;NAME</text>
+<text x="-1.27" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
+<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+</package>
+<package name="1X03_LOCK_LONGPADS">
+<description>This footprint was designed to help hold the alignment of a through-hole component (i.e.  6-pin header) while soldering it into place.  
+You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).  
+This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes.  Because they are alternating, it causes a "brace" 
+to hold the component in place.  0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers.
+Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice.  Also,
+if you push a header all the way into place, it is covered up entirely on the bottom side.  This idea of altering the position of holes to aid alignment 
+will be further integrated into the Sparkfun Library for other footprints.  It can help hold any component with 3 or more connection pins.</description>
+<wire x1="1.524" y1="-0.127" x2="1.016" y2="-0.127" width="0.2032" layer="21"/>
+<wire x1="4.064" y1="-0.127" x2="3.556" y2="-0.127" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.127" x2="-1.016" y2="-0.127" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.127" x2="-1.27" y2="0.8636" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0.8636" x2="-0.9906" y2="1.143" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.127" x2="-1.27" y2="-1.1176" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-1.1176" x2="-0.9906" y2="-1.397" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="-0.127" x2="6.096" y2="-0.127" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="-0.127" x2="6.35" y2="-1.1176" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="-1.1176" x2="6.0706" y2="-1.397" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="-0.127" x2="6.35" y2="0.8636" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="0.8636" x2="6.0706" y2="1.143" width="0.2032" layer="21"/>
+<pad name="1" x="0" y="0" drill="1.016" shape="long" rot="R90"/>
+<pad name="2" x="2.54" y="-0.254" drill="1.016" shape="long" rot="R90"/>
+<pad name="3" x="5.08" y="0" drill="1.016" shape="long" rot="R90"/>
+<text x="-1.27" y="1.778" size="1.27" layer="25" font="vector">&gt;NAME</text>
+<text x="-1.27" y="-3.302" size="1.27" layer="27" font="vector">&gt;VALUE</text>
+<rectangle x1="-0.2921" y1="-0.4191" x2="0.2921" y2="0.1651" layer="51"/>
+<rectangle x1="2.2479" y1="-0.4191" x2="2.8321" y2="0.1651" layer="51"/>
+<rectangle x1="4.7879" y1="-0.4191" x2="5.3721" y2="0.1651" layer="51"/>
+</package>
+<package name="MOLEX-1X3_LOCK">
+<wire x1="-1.27" y1="3.048" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="6.35" y1="3.048" x2="6.35" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="6.35" y1="3.048" x2="-1.27" y2="3.048" width="0.127" layer="21"/>
+<wire x1="6.35" y1="-2.54" x2="5.08" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="5.08" y1="-2.54" x2="0" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="0" y1="-2.54" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="0" y1="-2.54" x2="0" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="0" y1="-1.27" x2="5.08" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="5.08" y1="-1.27" x2="5.08" y2="-2.54" width="0.127" layer="21"/>
+<pad name="1" x="0" y="0.127" drill="1.016" diameter="1.8796" shape="square"/>
+<pad name="2" x="2.54" y="-0.127" drill="1.016" diameter="1.8796"/>
+<pad name="3" x="5.08" y="0.127" drill="1.016" diameter="1.8796"/>
+<rectangle x1="-0.2921" y1="-0.2921" x2="0.2921" y2="0.2921" layer="51"/>
+<rectangle x1="2.2479" y1="-0.2921" x2="2.8321" y2="0.2921" layer="51"/>
+<rectangle x1="4.7879" y1="-0.2921" x2="5.3721" y2="0.2921" layer="51"/>
+</package>
+<package name="SCREWTERMINAL-3.5MM-3_LOCK.007S">
+<wire x1="-2.3" y1="3.4" x2="9.3" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="9.3" y1="3.4" x2="9.3" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="9.3" y1="-2.8" x2="9.3" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="9.3" y1="-3.6" x2="-2.3" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="-2.3" y1="-3.6" x2="-2.3" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-2.3" y1="-2.8" x2="-2.3" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="9.3" y1="-2.8" x2="-2.3" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-2.3" y1="-1.35" x2="-2.7" y2="-1.35" width="0.2032" layer="51"/>
+<wire x1="-2.7" y1="-1.35" x2="-2.7" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="-2.7" y1="-2.35" x2="-2.3" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="9.3" y1="3.15" x2="9.7" y2="3.15" width="0.2032" layer="51"/>
+<wire x1="9.7" y1="3.15" x2="9.7" y2="2.15" width="0.2032" layer="51"/>
+<wire x1="9.7" y1="2.15" x2="9.3" y2="2.15" width="0.2032" layer="51"/>
+<circle x="0" y="0" radius="0.425" width="0.001" layer="51"/>
+<circle x="3.5" y="0" radius="0.425" width="0.001" layer="51"/>
+<circle x="7" y="0" radius="0.425" width="0.001" layer="51"/>
+<pad name="1" x="-0.1778" y="0" drill="1.2" diameter="2.032" shape="square"/>
+<pad name="2" x="3.5" y="0" drill="1.2" diameter="2.032"/>
+<pad name="3" x="7.1778" y="0" drill="1.2" diameter="2.032"/>
+<text x="-1.27" y="2.54" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-1.27" y="1.27" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
+<package name="1X03_NO_SILK">
+<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="3" x="5.08" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<text x="-1.3462" y="1.8288" size="1.27" layer="25" ratio="10">&gt;NAME</text>
+<text x="-1.27" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
+<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+</package>
+<package name="1X03_LONGPADS">
+<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="0.635" x2="6.35" y2="-0.635" width="0.2032" layer="21"/>
+<pad name="1" x="0" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
+<pad name="3" x="5.08" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
+<text x="-1.3462" y="2.4638" size="1.27" layer="25" ratio="10">&gt;NAME</text>
+<text x="-1.27" y="-3.81" size="1.27" layer="27">&gt;VALUE</text>
+<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+</package>
+<package name="JST-3-PTH">
+<wire x1="-4" y1="-6.3" x2="-4" y2="1.5" width="0.2032" layer="21"/>
+<wire x1="-4" y1="1.5" x2="4" y2="1.5" width="0.2032" layer="21"/>
+<wire x1="4" y1="1.5" x2="4" y2="-6.3" width="0.2032" layer="21"/>
+<wire x1="-4" y1="-6.3" x2="-3.3" y2="-6.3" width="0.2032" layer="21"/>
+<wire x1="4" y1="-6.3" x2="3.3" y2="-6.3" width="0.2032" layer="21"/>
+<wire x1="-3.3" y1="-6.3" x2="-3.3" y2="-5" width="0.2032" layer="21"/>
+<wire x1="3.3" y1="-6.3" x2="3.3" y2="-5" width="0.2032" layer="21"/>
+<pad name="1" x="-2" y="-5" drill="0.7" diameter="1.6256"/>
+<pad name="2" x="0" y="-5" drill="0.7" diameter="1.6256"/>
+<pad name="3" x="2" y="-5" drill="0.7" diameter="1.6256"/>
+<text x="-1.27" y="0.24" size="0.4064" layer="25">&gt;Name</text>
+<text x="-1.27" y="-1.03" size="0.4064" layer="27">&gt;Value</text>
+<text x="-2.4" y="-4.33" size="1.27" layer="51">+</text>
+<text x="-0.4" y="-4.33" size="1.27" layer="51">-</text>
+<text x="1.7" y="-4.13" size="0.8" layer="51">S</text>
+</package>
+<package name="1X03_PP_HOLES_ONLY">
+<circle x="0" y="0" radius="0.635" width="0.127" layer="51"/>
+<circle x="2.54" y="0" radius="0.635" width="0.127" layer="51"/>
+<circle x="5.08" y="0" radius="0.635" width="0.127" layer="51"/>
+<pad name="1" x="0" y="0" drill="0.9" diameter="0.8128" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="0.9" diameter="0.8128" rot="R90"/>
+<pad name="3" x="5.08" y="0" drill="0.9" diameter="0.8128" rot="R90"/>
+<hole x="0" y="0" drill="1.4732"/>
+<hole x="2.54" y="0" drill="1.4732"/>
+<hole x="5.08" y="0" drill="1.4732"/>
+</package>
+<package name="SCREWTERMINAL-5MM-3">
+<wire x1="-3.1" y1="4.2" x2="13.1" y2="4.2" width="0.2032" layer="21"/>
+<wire x1="13.1" y1="4.2" x2="13.1" y2="-2.3" width="0.2032" layer="21"/>
+<wire x1="13.1" y1="-2.3" x2="13.1" y2="-3.3" width="0.2032" layer="21"/>
+<wire x1="13.1" y1="-3.3" x2="-3.1" y2="-3.3" width="0.2032" layer="21"/>
+<wire x1="-3.1" y1="-3.3" x2="-3.1" y2="-2.3" width="0.2032" layer="21"/>
+<wire x1="-3.1" y1="-2.3" x2="-3.1" y2="4.2" width="0.2032" layer="21"/>
+<wire x1="13.1" y1="-2.3" x2="-3.1" y2="-2.3" width="0.2032" layer="21"/>
+<wire x1="-3.1" y1="-1.35" x2="-3.7" y2="-1.35" width="0.2032" layer="51"/>
+<wire x1="-3.7" y1="-1.35" x2="-3.7" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="-3.7" y1="-2.35" x2="-3.1" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="13.1" y1="4" x2="13.7" y2="4" width="0.2032" layer="51"/>
+<wire x1="13.7" y1="4" x2="13.7" y2="3" width="0.2032" layer="51"/>
+<wire x1="13.7" y1="3" x2="13.1" y2="3" width="0.2032" layer="51"/>
+<circle x="2.5" y="3.7" radius="0.2828" width="0.127" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.3" diameter="2.413" shape="square"/>
+<pad name="2" x="5" y="0" drill="1.3" diameter="2.413"/>
+<pad name="3" x="10" y="0" drill="1.3" diameter="2.413"/>
+<text x="-1.27" y="2.54" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-1.27" y="1.27" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
+<package name="1X03_LOCK_NO_SILK">
+<pad name="1" x="0" y="0.127" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.54" y="-0.127" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="3" x="5.08" y="0.127" drill="1.016" diameter="1.8796" rot="R90"/>
+<text x="-1.3462" y="1.8288" size="1.27" layer="25" ratio="10">&gt;NAME</text>
+<text x="-1.27" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
+<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+</package>
+<package name="JST-3-SMD">
+<wire x1="-4.99" y1="-2.07" x2="-4.99" y2="-5.57" width="0.2032" layer="21"/>
+<wire x1="-4.99" y1="-5.57" x2="-4.19" y2="-5.57" width="0.2032" layer="21"/>
+<wire x1="-4.19" y1="-5.57" x2="-4.19" y2="-3.07" width="0.2032" layer="21"/>
+<wire x1="-4.19" y1="-3.07" x2="-2.99" y2="-3.07" width="0.2032" layer="21"/>
+<wire x1="3.01" y1="-3.07" x2="4.21" y2="-3.07" width="0.2032" layer="21"/>
+<wire x1="4.21" y1="-3.07" x2="4.21" y2="-5.57" width="0.2032" layer="21"/>
+<wire x1="4.21" y1="-5.57" x2="5.01" y2="-5.57" width="0.2032" layer="21"/>
+<wire x1="5.01" y1="-5.57" x2="5.01" y2="-2.07" width="0.2032" layer="21"/>
+<wire x1="3.01" y1="1.93" x2="-2.99" y2="1.93" width="0.2032" layer="21"/>
+<smd name="1" x="-1.99" y="-4.77" dx="1" dy="4.6" layer="1"/>
+<smd name="3" x="2.01" y="-4.77" dx="1" dy="4.6" layer="1"/>
+<smd name="NC1" x="-4.39" y="0.43" dx="3.4" dy="1.6" layer="1" rot="R90"/>
+<smd name="NC2" x="4.41" y="0.43" dx="3.4" dy="1.6" layer="1" rot="R90"/>
+<smd name="2" x="0.01" y="-4.77" dx="1" dy="4.6" layer="1"/>
+<text x="-2.26" y="0.2" size="0.4064" layer="25">&gt;Name</text>
+<text x="-2.26" y="-1.07" size="0.4064" layer="27">&gt;Value</text>
+</package>
+<package name="1X03-1MM-RA">
+<wire x1="-1" y1="-4.6" x2="1" y2="-4.6" width="0.254" layer="21"/>
+<wire x1="-2.5" y1="-2" x2="-2.5" y2="-0.35" width="0.254" layer="21"/>
+<wire x1="1.75" y1="-0.35" x2="2.4997" y2="-0.35" width="0.254" layer="21"/>
+<wire x1="2.4997" y1="-0.35" x2="2.4997" y2="-2" width="0.254" layer="21"/>
+<wire x1="-2.5" y1="-0.35" x2="-1.75" y2="-0.35" width="0.254" layer="21"/>
+<circle x="-2" y="0.3" radius="0.1414" width="0.4" layer="21"/>
+<smd name="NC2" x="-2.3" y="-3.675" dx="1.2" dy="2" layer="1"/>
+<smd name="NC1" x="2.3" y="-3.675" dx="1.2" dy="2" layer="1"/>
+<smd name="1" x="-1" y="0" dx="0.6" dy="1.35" layer="1"/>
+<smd name="2" x="0" y="0" dx="0.6" dy="1.35" layer="1"/>
+<smd name="3" x="1" y="0" dx="0.6" dy="1.35" layer="1"/>
+<text x="-1.73" y="1.73" size="0.4064" layer="25" rot="R180">&gt;NAME</text>
+<text x="3.46" y="1.73" size="0.4064" layer="27" rot="R180">&gt;VALUE</text>
+</package>
 </packages>
 <symbols>
 <symbol name="AVR_SPI_PROGRAMMER">
@@ -2669,6 +2946,20 @@ Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.
 <text x="-1.016" y="3.556" size="1.778" layer="96">&gt;VALUE</text>
 <pin name="3.3V" x="0" y="0" visible="off" length="short" direction="sup" rot="R90"/>
 </symbol>
+<symbol name="M03">
+<wire x1="3.81" y1="-5.08" x2="-2.54" y2="-5.08" width="0.4064" layer="94"/>
+<wire x1="1.27" y1="2.54" x2="2.54" y2="2.54" width="0.6096" layer="94"/>
+<wire x1="1.27" y1="0" x2="2.54" y2="0" width="0.6096" layer="94"/>
+<wire x1="1.27" y1="-2.54" x2="2.54" y2="-2.54" width="0.6096" layer="94"/>
+<wire x1="-2.54" y1="5.08" x2="-2.54" y2="-5.08" width="0.4064" layer="94"/>
+<wire x1="3.81" y1="-5.08" x2="3.81" y2="5.08" width="0.4064" layer="94"/>
+<wire x1="-2.54" y1="5.08" x2="3.81" y2="5.08" width="0.4064" layer="94"/>
+<text x="-2.54" y="-7.62" size="1.778" layer="96">&gt;VALUE</text>
+<text x="-2.54" y="5.842" size="1.778" layer="95">&gt;NAME</text>
+<pin name="1" x="7.62" y="-2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
+<pin name="2" x="7.62" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
+<pin name="3" x="7.62" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
+</symbol>
 </symbols>
 <devicesets>
 <deviceset name="AVR_SPI_PROG">
@@ -3839,6 +4130,165 @@ These are standard SMD and PTH capacitors. Normally 10uF, 47uF, and 100uF in ele
 </device>
 </devices>
 </deviceset>
+<deviceset name="M03" prefix="JP" uservalue="yes">
+<description>&lt;b&gt;Header 3&lt;/b&gt;
+Standard 3-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08232 with associated crimp pins and housings.</description>
+<gates>
+<gate name="G$1" symbol="M03" x="-2.54" y="0"/>
+</gates>
+<devices>
+<device name="PTH" package="1X03">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="POLAR" package="MOLEX-1X3">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="SCREW" package="SCREWTERMINAL-3.5MM-3">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="LOCK" package="1X03_LOCK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="LOCK_LONGPADS" package="1X03_LOCK_LONGPADS">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="POLAR_LOCK" package="MOLEX-1X3_LOCK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="SCREW_LOCK" package="SCREWTERMINAL-3.5MM-3_LOCK.007S">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="1X03_NO_SILK" package="1X03_NO_SILK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="LONGPADS" package="1X03_LONGPADS">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="JST-PTH" package="JST-3-PTH">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="POGO_PIN_HOLES_ONLY" package="1X03_PP_HOLES_ONLY">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="-SCREW-5MM" package="SCREWTERMINAL-5MM-3">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="LOCK_NO_SILK" package="1X03_LOCK_NO_SILK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="" package="JST-3-SMD">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="SMD" package="1X03-1MM-RA">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
 </devicesets>
 </library>
 </libraries>
@@ -3886,13 +4336,17 @@ These are standard SMD and PTH capacitors. Normally 10uF, 47uF, and 100uF in ele
 <part name="LED4" library="SparkFun" deviceset="LED" device="1206"/>
 <part name="GND7" library="supply1" deviceset="GND" device=""/>
 <part name="GND8" library="supply1" deviceset="GND" device=""/>
-<part name="C1" library="SparkFun" deviceset="CAP" device="0805"/>
-<part name="C2" library="SparkFun" deviceset="CAP" device="0805"/>
-<part name="C3" library="SparkFun" deviceset="CAP_POL" device="1206"/>
+<part name="C1" library="SparkFun" deviceset="CAP" device="0805" value="100n"/>
+<part name="C2" library="SparkFun" deviceset="CAP" device="0805" value="100n"/>
+<part name="C3" library="SparkFun" deviceset="CAP_POL" device="1206" value="10u"/>
 <part name="U$1" library="SparkFun" deviceset="5V" device=""/>
 <part name="U$2" library="SparkFun" deviceset="5V" device=""/>
 <part name="U$3" library="SparkFun" deviceset="5V" device=""/>
 <part name="P+1" library="SparkFun" deviceset="3.3V" device=""/>
+<part name="JP6" library="SparkFun" deviceset="M03" device="PTH"/>
+<part name="U$4" library="SparkFun" deviceset="5V" device=""/>
+<part name="P+2" library="SparkFun" deviceset="3.3V" device=""/>
+<part name="GND10" library="supply1" deviceset="GND" device=""/>
 </parts>
 <sheets>
 <sheet>
@@ -3905,6 +4359,10 @@ These are standard SMD and PTH capacitors. Normally 10uF, 47uF, and 100uF in ele
 <text x="127" y="243.84" size="1.778" layer="91">usb conn ok ?</text>
 <text x="127" y="241.3" size="1.778" layer="91">3 vcc sources: fix switches and/or add diodes</text>
 <text x="12.7" y="180.34" size="1.778" layer="91">This switch allows to supply programmer</text>
+<text x="55.88" y="218.44" size="1.778" layer="91">Select between 3.3V or 5V for UART</text>
+<text x="58.42" y="208.28" size="1.778" layer="91">Unfortunately, it looks impossible to
+use an external supply lower than 4V
+for VCCIO. So use a manual switch.</text>
 </plain>
 <instances>
 <instance part="X1" gate="-1" x="55.88" y="149.86"/>
@@ -3958,12 +4416,16 @@ These are standard SMD and PTH capacitors. Normally 10uF, 47uF, and 100uF in ele
 <instance part="GND7" gate="1" x="157.48" y="172.72"/>
 <instance part="GND8" gate="1" x="160.02" y="220.98"/>
 <instance part="C1" gate="G$1" x="157.48" y="187.96"/>
-<instance part="C2" gate="G$1" x="175.26" y="187.96"/>
+<instance part="C2" gate="G$1" x="172.72" y="187.96"/>
 <instance part="C3" gate="G$1" x="165.1" y="190.5"/>
 <instance part="U$1" gate="G$1" x="154.94" y="203.2"/>
 <instance part="U$2" gate="G$1" x="165.1" y="213.36"/>
 <instance part="U$3" gate="G$1" x="264.16" y="187.96"/>
-<instance part="P+1" gate="G$1" x="172.72" y="198.12"/>
+<instance part="P+1" gate="G$1" x="167.64" y="195.58"/>
+<instance part="JP6" gate="G$1" x="71.12" y="228.6"/>
+<instance part="U$4" gate="G$1" x="83.82" y="236.22"/>
+<instance part="P+2" gate="G$1" x="101.6" y="228.6"/>
+<instance part="GND10" gate="1" x="226.06" y="198.12"/>
 </instances>
 <busses>
 </busses>
@@ -4058,20 +4520,27 @@ These are standard SMD and PTH capacitors. Normally 10uF, 47uF, and 100uF in ele
 <pinref part="IC1" gate="G$1" pin="AGND"/>
 <wire x1="187.96" y1="182.88" x2="185.42" y2="182.88" width="0.1524" layer="91"/>
 <pinref part="GND7" gate="1" pin="GND"/>
-<wire x1="185.42" y1="175.26" x2="175.26" y2="175.26" width="0.1524" layer="91"/>
+<wire x1="185.42" y1="175.26" x2="172.72" y2="175.26" width="0.1524" layer="91"/>
 <junction x="185.42" y="182.88"/>
 <junction x="185.42" y="180.34"/>
 <junction x="185.42" y="177.8"/>
 <junction x="185.42" y="175.26"/>
 <pinref part="C3" gate="G$1" pin="-"/>
-<wire x1="175.26" y1="175.26" x2="165.1" y2="175.26" width="0.1524" layer="91"/>
+<wire x1="172.72" y1="175.26" x2="165.1" y2="175.26" width="0.1524" layer="91"/>
 <wire x1="165.1" y1="175.26" x2="157.48" y2="175.26" width="0.1524" layer="91"/>
 <wire x1="165.1" y1="185.42" x2="165.1" y2="175.26" width="0.1524" layer="91"/>
 <pinref part="C1" gate="G$1" pin="2"/>
 <wire x1="157.48" y1="185.42" x2="157.48" y2="175.26" width="0.1524" layer="91"/>
 <junction x="165.1" y="175.26"/>
 <pinref part="C2" gate="G$1" pin="2"/>
-<wire x1="175.26" y1="185.42" x2="175.26" y2="175.26" width="0.1524" layer="91"/>
+<wire x1="172.72" y1="185.42" x2="172.72" y2="175.26" width="0.1524" layer="91"/>
+<junction x="172.72" y="175.26"/>
+</segment>
+<segment>
+<pinref part="IC1" gate="G$1" pin="CTS"/>
+<wire x1="218.44" y1="203.2" x2="226.06" y2="203.2" width="0.1524" layer="91"/>
+<wire x1="226.06" y1="203.2" x2="226.06" y2="200.66" width="0.1524" layer="91"/>
+<pinref part="GND10" gate="1" pin="GND"/>
 </segment>
 </net>
 <net name="PDI_CLK_RESET" class="0">
@@ -4219,11 +4688,6 @@ These are standard SMD and PTH capacitors. Normally 10uF, 47uF, and 100uF in ele
 <label x="12.7" y="172.72" size="1.778" layer="95"/>
 <pinref part="R10" gate="G$1" pin="1"/>
 </segment>
-<segment>
-<pinref part="IC1" gate="G$1" pin="VCCIO"/>
-<wire x1="187.96" y1="198.12" x2="177.8" y2="198.12" width="0.1524" layer="91"/>
-<label x="177.8" y="198.12" size="1.778" layer="95"/>
-</segment>
 </net>
 <net name="RESET" class="0">
 <segment>
@@ -4238,6 +4702,11 @@ These are standard SMD and PTH capacitors. Normally 10uF, 47uF, and 100uF in ele
 <label x="12.7" y="134.62" size="1.778" layer="95"/>
 <pinref part="R5" gate="G$1" pin="1"/>
 </segment>
+<segment>
+<pinref part="IC1" gate="G$1" pin="RXD"/>
+<wire x1="218.44" y1="208.28" x2="228.6" y2="208.28" width="0.1524" layer="91"/>
+<label x="220.98" y="208.28" size="1.778" layer="95"/>
+</segment>
 </net>
 <net name="RX_AVR" class="0">
 <segment>
@@ -4245,6 +4714,11 @@ These are standard SMD and PTH capacitors. Normally 10uF, 47uF, and 100uF in ele
 <label x="12.7" y="137.16" size="1.778" layer="95"/>
 <pinref part="R4" gate="G$1" pin="1"/>
 </segment>
+<segment>
+<pinref part="IC1" gate="G$1" pin="TXD"/>
+<wire x1="218.44" y1="210.82" x2="228.6" y2="210.82" width="0.1524" layer="91"/>
+<label x="220.98" y="210.82" size="1.778" layer="95"/>
+</segment>
 </net>
 <net name="VCC_PGM" class="0">
 <segment>
@@ -4421,17 +4895,41 @@ These are standard SMD and PTH capacitors. Normally 10uF, 47uF, and 100uF in ele
 <pinref part="U$3" gate="G$1" pin="5V"/>
 <wire x1="264.16" y1="185.42" x2="264.16" y2="187.96" width="0.1524" layer="91"/>
 </segment>
+<segment>
+<pinref part="JP6" gate="G$1" pin="3"/>
+<wire x1="78.74" y1="231.14" x2="83.82" y2="231.14" width="0.1524" layer="91"/>
+<wire x1="83.82" y1="231.14" x2="83.82" y2="236.22" width="0.1524" layer="91"/>
+<pinref part="U$4" gate="G$1" pin="5V"/>
+</segment>
 </net>
 <net name="3.3V" class="0">
 <segment>
 <pinref part="IC1" gate="G$1" pin="3V3OUT"/>
 <pinref part="C2" gate="G$1" pin="1"/>
-<wire x1="187.96" y1="200.66" x2="175.26" y2="200.66" width="0.1524" layer="91"/>
-<wire x1="175.26" y1="200.66" x2="175.26" y2="198.12" width="0.1524" layer="91"/>
+<wire x1="187.96" y1="200.66" x2="172.72" y2="200.66" width="0.1524" layer="91"/>
+<wire x1="172.72" y1="200.66" x2="172.72" y2="195.58" width="0.1524" layer="91"/>
 <pinref part="P+1" gate="G$1" pin="3.3V"/>
-<wire x1="175.26" y1="198.12" x2="175.26" y2="193.04" width="0.1524" layer="91"/>
-<wire x1="175.26" y1="198.12" x2="172.72" y2="198.12" width="0.1524" layer="91"/>
-<junction x="175.26" y="198.12"/>
+<wire x1="172.72" y1="195.58" x2="172.72" y2="193.04" width="0.1524" layer="91"/>
+<wire x1="172.72" y1="195.58" x2="167.64" y2="195.58" width="0.1524" layer="91"/>
+<junction x="172.72" y="195.58"/>
+</segment>
+<segment>
+<pinref part="JP6" gate="G$1" pin="1"/>
+<wire x1="78.74" y1="226.06" x2="101.6" y2="226.06" width="0.1524" layer="91"/>
+<pinref part="P+2" gate="G$1" pin="3.3V"/>
+<wire x1="101.6" y1="226.06" x2="101.6" y2="228.6" width="0.1524" layer="91"/>
+</segment>
+</net>
+<net name="VCCIO" class="0">
+<segment>
+<pinref part="JP6" gate="G$1" pin="2"/>
+<wire x1="78.74" y1="228.6" x2="93.98" y2="228.6" width="0.1524" layer="91"/>
+<label x="83.82" y="228.6" size="1.778" layer="95"/>
+</segment>
+<segment>
+<pinref part="IC1" gate="G$1" pin="VCCIO"/>
+<wire x1="187.96" y1="198.12" x2="177.8" y2="198.12" width="0.1524" layer="91"/>
+<label x="177.8" y="198.12" size="1.778" layer="95"/>
 </segment>
 </net>
 </nets>
@@ -4439,4 +4937,10 @@ These are standard SMD and PTH capacitors. Normally 10uF, 47uF, and 100uF in ele
 </sheets>
 </schematic>
 </drawing>
+<compatibility>
+<note version="6.3" minversion="6.2.2" severity="warning">
+Since Version 6.2.2 text objects can contain more than one line,
+which will not be processed correctly with this version.
+</note>
+</compatibility>
 </eagle>