3 # Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions
10 # * Redistributions of source code must retain the above copyright
11 # notice, this list of conditions and the following disclaimer.
12 # * Redistributions in binary form must reproduce the above copyright
13 # notice, this list of conditions and the following disclaimer in
14 # the documentation and/or other materials provided with the
16 # * Neither the name of Intel Corporation nor the names of its
17 # contributors may be used to endorse or promote products derived
18 # from this software without specific prior written permission.
20 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 # define executive environment
35 # RTE_EXEC_ENV values are the directories in mk/exec-env/
40 # define the architecture we compile for.
41 # RTE_ARCH values are the directories in mk/arch/
46 # machine can define specific variables or action for a specific board
47 # RTE_MACHINE values are the directories in mk/machine/
52 # The compiler we use.
53 # RTE_TOOLCHAIN values are the directories in mk/toolchain/
58 # Use intrinsics or assembly code for key routines
60 CONFIG_RTE_FORCE_INTRINSICS=n
63 # Machine forces strict alignment constraints.
65 CONFIG_RTE_ARCH_STRICT_ALIGN=n
68 # Compile to share library
70 CONFIG_RTE_BUILD_SHARED_LIB=n
73 # Use newest code breaking previous ABI
78 # Major ABI to overwrite library specific LIBABIVER
83 # Machine's cache line size
85 CONFIG_RTE_CACHE_LINE_SIZE=64
88 # Compile Environment Abstraction Layer
90 CONFIG_RTE_LIBRTE_EAL=y
91 CONFIG_RTE_MAX_LCORE=128
92 CONFIG_RTE_MAX_NUMA_NODES=8
93 CONFIG_RTE_MAX_MEMSEG=256
94 CONFIG_RTE_MAX_MEMZONE=2560
95 CONFIG_RTE_MAX_TAILQ=32
96 CONFIG_RTE_LOG_LEVEL=RTE_LOG_INFO
97 CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
98 CONFIG_RTE_LOG_HISTORY=256
99 CONFIG_RTE_BACKTRACE=y
100 CONFIG_RTE_LIBEAL_USE_HPET=n
101 CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
102 CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
103 CONFIG_RTE_EAL_IGB_UIO=n
104 CONFIG_RTE_EAL_VFIO=n
105 CONFIG_RTE_MALLOC_DEBUG=n
106 CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
109 # Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
110 # AVX512 is marked as experimental for now, will enable it after enough
111 # field test and possible optimization.
113 CONFIG_RTE_ENABLE_AVX=y
114 CONFIG_RTE_ENABLE_AVX512=n
116 # Default driver path (or "" to disable)
117 CONFIG_RTE_EAL_PMD_PATH=""
120 # Compile Environment Abstraction Layer to support Vmware TSC map
122 CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
125 # Compile the argument parser library
127 CONFIG_RTE_LIBRTE_KVARGS=y
130 # Compile generic ethernet library
132 CONFIG_RTE_LIBRTE_ETHER=y
133 CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
134 CONFIG_RTE_MAX_ETHPORTS=32
135 CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
136 CONFIG_RTE_LIBRTE_IEEE1588=n
137 CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
138 CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
141 # Turn off Tx preparation stage
143 # Warning: rte_eth_tx_prepare() can be safely disabled only if using a
144 # driver which do not implement any Tx preparation.
146 CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
149 # Compile burst-oriented Amazon ENA PMD driver
151 CONFIG_RTE_LIBRTE_ENA_PMD=y
152 CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
153 CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
154 CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
155 CONFIG_RTE_LIBRTE_ENA_DEBUG_DRIVER=n
156 CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
159 # Compile burst-oriented IGB & EM PMD drivers
161 CONFIG_RTE_LIBRTE_EM_PMD=y
162 CONFIG_RTE_LIBRTE_IGB_PMD=y
163 CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
164 CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
165 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
166 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
167 CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
168 CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
171 # Compile burst-oriented IXGBE PMD driver
173 CONFIG_RTE_LIBRTE_IXGBE_PMD=y
174 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
175 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
176 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
177 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
178 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
179 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
180 CONFIG_RTE_IXGBE_INC_VECTOR=y
181 CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
184 # Compile burst-oriented I40E PMD driver
186 CONFIG_RTE_LIBRTE_I40E_PMD=y
187 CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
188 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
189 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
190 CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
191 CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
192 CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
193 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
194 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
195 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
196 # interval up to 8160 us, aligned to 2 (or default value)
197 CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
200 # Compile burst-oriented FM10K PMD
202 CONFIG_RTE_LIBRTE_FM10K_PMD=y
203 CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
204 CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
205 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
206 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
207 CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
208 CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
209 CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
212 # Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
214 CONFIG_RTE_LIBRTE_MLX4_PMD=n
215 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
216 CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
217 CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
218 CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
219 CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
222 # Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD
224 CONFIG_RTE_LIBRTE_MLX5_PMD=n
225 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
226 CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
229 # Compile burst-oriented Broadcom PMD driver
231 CONFIG_RTE_LIBRTE_BNX2X_PMD=n
232 CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
233 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
234 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
235 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
236 CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
237 CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
240 # Compile burst-oriented Chelsio Terminator (CXGBE) PMD
242 CONFIG_RTE_LIBRTE_CXGBE_PMD=y
243 CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
244 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
245 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
246 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
247 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
248 CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
251 # Compile burst-oriented Cisco ENIC PMD driver
253 CONFIG_RTE_LIBRTE_ENIC_PMD=y
254 CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
255 CONFIG_RTE_LIBRTE_ENIC_DEBUG_FLOW=n
258 # Compile burst-oriented Netronome NFP PMD driver
260 CONFIG_RTE_LIBRTE_NFP_PMD=n
261 CONFIG_RTE_LIBRTE_NFP_DEBUG=n
264 # Compile burst-oriented Broadcom BNXT PMD driver
266 CONFIG_RTE_LIBRTE_BNXT_PMD=y
269 # Compile burst-oriented Solarflare libefx-based PMD
271 CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
272 CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
275 # Compile software PMD backed by SZEDATA2 device
277 CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
279 # Defines firmware type address space.
280 # See documentation for supported values.
281 # Other values raise compile time error.
282 CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0
285 # Compile burst-oriented Cavium Thunderx NICVF PMD driver
287 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
288 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_INIT=n
289 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
290 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
291 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_DRIVER=n
292 CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_MBOX=n
295 # Compile burst-oriented Cavium LiquidIO PMD driver
297 CONFIG_RTE_LIBRTE_LIO_PMD=y
298 CONFIG_RTE_LIBRTE_LIO_DEBUG_DRIVER=n
299 CONFIG_RTE_LIBRTE_LIO_DEBUG_INIT=n
300 CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
301 CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
302 CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
303 CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
306 # Compile NXP DPAA2 FSL-MC Bus
308 CONFIG_RTE_LIBRTE_FSLMC_BUS=n
311 # Compile Support Libraries for NXP DPAA2
313 CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
314 CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
317 # Compile burst-oriented NXP DPAA2 PMD driver
319 CONFIG_RTE_LIBRTE_DPAA2_PMD=n
320 CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
321 CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
322 CONFIG_RTE_LIBRTE_DPAA2_DEBUG_RX=n
323 CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX=n
324 CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
327 # Compile burst-oriented VIRTIO PMD driver
329 CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
330 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
331 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
332 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
333 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
334 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
337 # Compile virtio device emulation inside virtio PMD driver
339 CONFIG_RTE_VIRTIO_USER=n
342 # Compile burst-oriented VMXNET3 PMD driver
344 CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
345 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
346 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
347 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
348 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
349 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
352 # Compile example software rings based PMD
354 CONFIG_RTE_LIBRTE_PMD_RING=y
355 CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
356 CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
359 # Compile software PMD backed by PCAP files
361 CONFIG_RTE_LIBRTE_PMD_PCAP=n
364 # Compile link bonding PMD library
366 CONFIG_RTE_LIBRTE_PMD_BOND=y
367 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
368 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
370 # QLogic 10G/25G/40G/50G/100G PMD
372 CONFIG_RTE_LIBRTE_QEDE_PMD=y
373 CONFIG_RTE_LIBRTE_QEDE_DEBUG_INIT=n
374 CONFIG_RTE_LIBRTE_QEDE_DEBUG_INFO=n
375 CONFIG_RTE_LIBRTE_QEDE_DEBUG_DRIVER=n
376 CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
377 CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
378 #Provides abs path/name of the firmware file.
379 #Empty string denotes driver will use default firmware
380 CONFIG_RTE_LIBRTE_QEDE_FW=""
383 # Compile software PMD backed by AF_PACKET sockets (Linux only)
385 CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
390 CONFIG_RTE_LIBRTE_ARK_PMD=y
391 CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
392 CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
393 CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
394 CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
395 CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
398 # Compile WRS accelerated virtual port (AVP) guest PMD driver
400 CONFIG_RTE_LIBRTE_AVP_PMD=n
401 CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
402 CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
403 CONFIG_RTE_LIBRTE_AVP_DEBUG_DRIVER=y
404 CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
407 # Compile the TAP PMD
408 # It is enabled by default for Linux only.
410 CONFIG_RTE_LIBRTE_PMD_TAP=n
415 CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
420 CONFIG_RTE_LIBRTE_PMD_NULL=y
423 # Compile fail-safe PMD
425 CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
428 # Do prefetch of packet data within PMD driver receive function
430 CONFIG_RTE_PMD_PACKET_PREFETCH=y
433 # Compile generic crypto device library
435 CONFIG_RTE_LIBRTE_CRYPTODEV=y
436 CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
437 CONFIG_RTE_CRYPTO_MAX_DEVS=64
438 CONFIG_RTE_CRYPTODEV_NAME_LEN=64
441 # Compile PMD for ARMv8 Crypto device
443 CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
444 CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
447 # Compile NXP DPAA2 crypto sec driver for CAAM HW
449 CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
450 CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n
451 CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n
452 CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n
455 # Compile PMD for QuickAssist based devices
457 CONFIG_RTE_LIBRTE_PMD_QAT=n
458 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
459 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
460 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
461 CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
463 # Number of sessions to create in the session memory pool
464 # on a single QuickAssist device.
466 CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
469 # Compile PMD for AESNI backed device
471 CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
472 CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
475 # Compile PMD for Software backed device
477 CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
478 CONFIG_RTE_LIBRTE_PMD_OPENSSL_DEBUG=n
481 # Compile PMD for AESNI GCM device
483 CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
484 CONFIG_RTE_LIBRTE_PMD_AESNI_GCM_DEBUG=n
487 # Compile PMD for SNOW 3G device
489 CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
490 CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
493 # Compile PMD for KASUMI device
495 CONFIG_RTE_LIBRTE_PMD_KASUMI=n
496 CONFIG_RTE_LIBRTE_PMD_KASUMI_DEBUG=n
499 # Compile PMD for ZUC device
501 CONFIG_RTE_LIBRTE_PMD_ZUC=n
502 CONFIG_RTE_LIBRTE_PMD_ZUC_DEBUG=n
505 # Compile PMD for Crypto Scheduler device
507 CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
508 CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER_DEBUG=n
511 # Compile PMD for NULL Crypto device
513 CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
516 # Compile generic event device library
518 CONFIG_RTE_LIBRTE_EVENTDEV=y
519 CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
520 CONFIG_RTE_EVENT_MAX_DEVS=16
521 CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
524 # Compile PMD for skeleton event device
526 CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
527 CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
530 # Compile PMD for software event device
532 CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
533 CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV_DEBUG=n
536 # Compile PMD for octeontx sso event device
538 CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
539 CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF_DEBUG=n
542 # Compile librte_ring
544 CONFIG_RTE_LIBRTE_RING=y
547 # Compile librte_mempool
549 CONFIG_RTE_LIBRTE_MEMPOOL=y
550 CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
551 CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
554 # Compile Mempool drivers
556 CONFIG_RTE_DRIVER_MEMPOOL_RING=y
557 CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
560 # Compile librte_mbuf
562 CONFIG_RTE_LIBRTE_MBUF=y
563 CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
564 CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
565 CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
566 CONFIG_RTE_PKTMBUF_HEADROOM=128
569 # Compile librte_timer
571 CONFIG_RTE_LIBRTE_TIMER=y
572 CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
575 # Compile librte_cfgfile
577 CONFIG_RTE_LIBRTE_CFGFILE=y
580 # Compile librte_cmdline
582 CONFIG_RTE_LIBRTE_CMDLINE=y
583 CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
586 # Compile librte_hash
588 CONFIG_RTE_LIBRTE_HASH=y
589 CONFIG_RTE_LIBRTE_HASH_DEBUG=n
594 CONFIG_RTE_LIBRTE_EFD=y
597 # Compile librte_jobstats
599 CONFIG_RTE_LIBRTE_JOBSTATS=y
602 # Compile the device metrics library
604 CONFIG_RTE_LIBRTE_METRICS=y
607 # Compile the bitrate statistics library
609 CONFIG_RTE_LIBRTE_BITRATE=y
612 # Compile the latency statistics library
614 CONFIG_RTE_LIBRTE_LATENCY_STATS=y
619 CONFIG_RTE_LIBRTE_LPM=y
620 CONFIG_RTE_LIBRTE_LPM_DEBUG=n
625 CONFIG_RTE_LIBRTE_ACL=y
626 CONFIG_RTE_LIBRTE_ACL_DEBUG=n
629 # Compile librte_power
631 CONFIG_RTE_LIBRTE_POWER=n
632 CONFIG_RTE_LIBRTE_POWER_DEBUG=n
633 CONFIG_RTE_MAX_LCORE_FREQS=64
638 CONFIG_RTE_LIBRTE_NET=y
641 # Compile librte_ip_frag
643 CONFIG_RTE_LIBRTE_IP_FRAG=y
644 CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
645 CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
646 CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
649 # Compile GRO library
651 CONFIG_RTE_LIBRTE_GRO=y
654 # Compile librte_meter
656 CONFIG_RTE_LIBRTE_METER=y
659 # Compile librte_sched
661 CONFIG_RTE_LIBRTE_SCHED=y
662 CONFIG_RTE_SCHED_DEBUG=n
663 CONFIG_RTE_SCHED_RED=n
664 CONFIG_RTE_SCHED_COLLECT_STATS=n
665 CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
666 CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
667 CONFIG_RTE_SCHED_VECTOR=n
670 # Compile the distributor library
672 CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
675 # Compile the reorder library
677 CONFIG_RTE_LIBRTE_REORDER=y
680 # Compile librte_port
682 CONFIG_RTE_LIBRTE_PORT=y
683 CONFIG_RTE_PORT_STATS_COLLECT=n
684 CONFIG_RTE_PORT_PCAP=n
687 # Compile librte_table
689 CONFIG_RTE_LIBRTE_TABLE=y
690 CONFIG_RTE_TABLE_STATS_COLLECT=n
693 # Compile librte_pipeline
695 CONFIG_RTE_LIBRTE_PIPELINE=y
696 CONFIG_RTE_PIPELINE_STATS_COLLECT=n
701 CONFIG_RTE_LIBRTE_KNI=n
702 CONFIG_RTE_LIBRTE_PMD_KNI=n
703 CONFIG_RTE_KNI_KMOD=n
704 CONFIG_RTE_KNI_KMOD_ETHTOOL=n
705 CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
708 # Compile the pdump library
710 CONFIG_RTE_LIBRTE_PDUMP=y
713 # Compile vhost user library
715 CONFIG_RTE_LIBRTE_VHOST=n
716 CONFIG_RTE_LIBRTE_VHOST_NUMA=n
717 CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
721 # To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
723 CONFIG_RTE_LIBRTE_PMD_VHOST=n
726 #Compile Xen domain0 support
728 CONFIG_RTE_LIBRTE_XEN_DOM0=n
731 # Compile the test application
733 CONFIG_RTE_APP_TEST=y
734 CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
737 # Compile the PMD test application
739 CONFIG_RTE_TEST_PMD=y
740 CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
741 CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
744 # Compile the crypto performance application
746 CONFIG_RTE_APP_CRYPTO_PERF=y
749 # Compile the eventdev application
751 CONFIG_RTE_APP_EVENTDEV=y