3 # Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions
10 # * Redistributions of source code must retain the above copyright
11 # notice, this list of conditions and the following disclaimer.
12 # * Redistributions in binary form must reproduce the above copyright
13 # notice, this list of conditions and the following disclaimer in
14 # the documentation and/or other materials provided with the
16 # * Neither the name of Intel Corporation nor the names of its
17 # contributors may be used to endorse or promote products derived
18 # from this software without specific prior written permission.
20 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 # define executive environment
36 # CONFIG_RTE_EXEC_ENV can be linuxapp, bsdapp
38 CONFIG_RTE_EXEC_ENV="bsdapp"
39 CONFIG_RTE_EXEC_ENV_BSDAPP=y
42 ## machine can define specific variables or action for a specific board
43 ## RTE_MACHINE can be:
44 ## default nothing specific
45 ## native current machine
46 ## atm Intel® Atom™ microarchitecture
47 ## nhm Intel® microarchitecture code name Nehalem
48 ## wsm Intel® microarchitecture code name Westmere
49 ## snb Intel® microarchitecture code name Sandy Bridge
50 ## ivb Intel® microarchitecture code name Ivy Bridge
52 ## Note: if your compiler does not support the relevant -march options,
53 ## it will be compiled with whatever latest processor the compiler supports!
55 #CONFIG_RTE_MACHINE="native"
58 ## define the architecture we compile for.
59 ## CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
61 #CONFIG_RTE_ARCH="x86_64"
62 #CONFIG_RTE_ARCH_X86_64=y
65 ## The compiler we use.
66 ## Can be gcc, icc or clang.
68 #CONFIG_RTE_TOOLCHAIN="gcc"
69 #CONFIG_RTE_TOOLCHAIN_GCC=y
72 # Use intrinsics or assembly code for key routines
74 CONFIG_RTE_FORCE_INTRINSICS=n
77 # Machine forces strict alignment constraints.
79 CONFIG_RTE_ARCH_STRICT_ALIGN=n
82 # Compile to share library
84 CONFIG_RTE_BUILD_SHARED_LIB=n
87 # Combine to one single library
89 CONFIG_RTE_BUILD_COMBINE_LIBS=n
92 # Use newest code breaking previous ABI
97 # Compile Environment Abstraction Layer
99 CONFIG_RTE_LIBRTE_EAL=y
100 CONFIG_RTE_MAX_LCORE=128
101 CONFIG_RTE_MAX_NUMA_NODES=8
102 CONFIG_RTE_MAX_MEMSEG=256
103 CONFIG_RTE_MAX_MEMZONE=2560
104 CONFIG_RTE_MAX_TAILQ=32
105 CONFIG_RTE_LOG_LEVEL=8
106 CONFIG_RTE_LOG_HISTORY=256
107 CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
108 CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
111 # FreeBSD contiguous memory driver settings
113 CONFIG_RTE_CONTIGMEM_MAX_NUM_BUFS=64
114 CONFIG_RTE_CONTIGMEM_DEFAULT_NUM_BUFS=2
115 CONFIG_RTE_CONTIGMEM_DEFAULT_BUF_SIZE=1024*1024*1024
118 # Compile Environment Abstraction Layer for BSD
120 CONFIG_RTE_LIBRTE_EAL_BSDAPP=y
123 # Compile Environment Abstraction Layer for linux
125 CONFIG_RTE_LIBRTE_EAL_LINUXAPP=n
128 # Compile Environment Abstraction Layer to support Vmware TSC map
130 CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
133 # Compile the argument parser library
135 CONFIG_RTE_LIBRTE_KVARGS=y
138 # Compile generic ethernet library
140 CONFIG_RTE_LIBRTE_ETHER=y
141 CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
142 CONFIG_RTE_MAX_ETHPORTS=32
143 CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
144 CONFIG_RTE_LIBRTE_IEEE1588=n
145 CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
146 CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
149 # Support NIC bypass logic
151 CONFIG_RTE_NIC_BYPASS=n
154 # Compile burst-oriented IGB & EM PMD drivers
156 CONFIG_RTE_LIBRTE_EM_PMD=y
157 CONFIG_RTE_LIBRTE_IGB_PMD=y
158 CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
159 CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
160 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
161 CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
162 CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
163 CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
166 # Compile burst-oriented IXGBE PMD driver
168 CONFIG_RTE_LIBRTE_IXGBE_PMD=y
169 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
170 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
171 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
172 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
173 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
174 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
175 CONFIG_RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC=y
176 CONFIG_RTE_IXGBE_INC_VECTOR=n
177 CONFIG_RTE_IXGBE_RX_OLFLAGS_DISABLE=n
180 # Compile burst-oriented I40E PMD driver
182 CONFIG_RTE_LIBRTE_I40E_PMD=y
183 CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
184 CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
185 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
186 CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
187 CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
188 CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=n
189 CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
190 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
191 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
192 # interval up to 8160 us, aligned to 2 (or default value)
193 CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
196 # Compile burst-oriented FM10K PMD
198 CONFIG_RTE_LIBRTE_FM10K_PMD=y
199 CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
200 CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
201 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
202 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
203 CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
204 CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
207 # Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
209 CONFIG_RTE_LIBRTE_MLX4_PMD=n
210 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
211 CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
212 CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
213 CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
214 CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
217 # Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
219 CONFIG_RTE_LIBRTE_CXGBE_PMD=n
220 CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
221 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
222 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
223 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
224 CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
227 # Compile burst-oriented Cisco ENIC PMD driver
229 CONFIG_RTE_LIBRTE_ENIC_PMD=y
230 CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
233 # Compile burst-oriented VIRTIO PMD driver
235 CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
236 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
237 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
238 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
239 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
240 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
243 # Compile burst-oriented VMXNET3 PMD driver
245 CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
246 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
247 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
248 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
249 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
250 CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
253 # Compile example software rings based PMD
255 CONFIG_RTE_LIBRTE_PMD_RING=y
256 CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
257 CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
260 # Compile software PMD backed by PCAP files
262 CONFIG_RTE_LIBRTE_PMD_PCAP=y
265 # Compile link bonding PMD library
267 CONFIG_RTE_LIBRTE_PMD_BOND=y
268 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
269 CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
274 CONFIG_RTE_LIBRTE_PMD_NULL=y
277 # Do prefetch of packet data within PMD driver receive function
279 CONFIG_RTE_PMD_PACKET_PREFETCH=y
282 # Compile librte_ring
284 CONFIG_RTE_LIBRTE_RING=y
285 CONFIG_RTE_LIBRTE_RING_DEBUG=n
286 CONFIG_RTE_RING_SPLIT_PROD_CONS=n
287 CONFIG_RTE_RING_PAUSE_REP_COUNT=0
290 # Compile librte_mempool
292 CONFIG_RTE_LIBRTE_MEMPOOL=y
293 CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
294 CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
297 # Compile librte_mbuf
299 CONFIG_RTE_LIBRTE_MBUF=y
300 CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
301 CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
302 CONFIG_RTE_PKTMBUF_HEADROOM=128
305 # Compile librte_timer
307 CONFIG_RTE_LIBRTE_TIMER=y
308 CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
311 # Compile librte_malloc
313 CONFIG_RTE_LIBRTE_MALLOC=y
314 CONFIG_RTE_LIBRTE_MALLOC_DEBUG=n
315 CONFIG_RTE_MALLOC_MEMZONE_SIZE=11M
318 # Compile librte_cfgfile
320 CONFIG_RTE_LIBRTE_CFGFILE=y
323 # Compile librte_cmdline
325 CONFIG_RTE_LIBRTE_CMDLINE=y
326 CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
329 # Compile librte_hash
331 CONFIG_RTE_LIBRTE_HASH=y
332 CONFIG_RTE_LIBRTE_HASH_DEBUG=n
335 # Compile librte_jobstats
337 CONFIG_RTE_LIBRTE_JOBSTATS=y
342 CONFIG_RTE_LIBRTE_LPM=y
343 CONFIG_RTE_LIBRTE_LPM_DEBUG=n
348 CONFIG_RTE_LIBRTE_ACL=y
349 CONFIG_RTE_LIBRTE_ACL_DEBUG=n
352 # Compile librte_power
354 CONFIG_RTE_LIBRTE_POWER=n
355 CONFIG_RTE_LIBRTE_POWER_DEBUG=n
356 CONFIG_RTE_MAX_LCORE_FREQS=64
361 CONFIG_RTE_LIBRTE_NET=y
364 # Compile librte_ip_frag
366 CONFIG_RTE_LIBRTE_IP_FRAG=y
367 CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
368 CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
369 CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
372 # Compile librte_meter
374 CONFIG_RTE_LIBRTE_METER=y
377 # Compile librte_sched
379 CONFIG_RTE_LIBRTE_SCHED=y
380 CONFIG_RTE_SCHED_RED=n
381 CONFIG_RTE_SCHED_COLLECT_STATS=n
382 CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
383 CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
386 # Compile the distributor library
388 CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
391 # Compile the reorder library
393 CONFIG_RTE_LIBRTE_REORDER=y
396 # Compile librte_port
398 CONFIG_RTE_LIBRTE_PORT=y
399 CONFIG_RTE_PORT_STATS_COLLECT=n
402 # Compile librte_table
404 CONFIG_RTE_LIBRTE_TABLE=y
405 CONFIG_RTE_TABLE_STATS_COLLECT=n
408 # Compile librte_pipeline
410 CONFIG_RTE_LIBRTE_PIPELINE=y
411 CONFIG_RTE_PIPELINE_STATS_COLLECT=n
416 CONFIG_RTE_LIBRTE_KNI=n
417 CONFIG_RTE_KNI_KO_DEBUG=n
418 CONFIG_RTE_KNI_VHOST=n
419 CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
420 CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
421 CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
422 CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
425 # Enable warning directives
427 CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
430 # Compile the test application
432 CONFIG_RTE_APP_TEST=y
435 # Compile the PMD test application
437 CONFIG_RTE_TEST_PMD=y
438 CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
439 CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n