2 * Copyright (c) 2007-2013 Broadcom Corporation.
4 * Eric Davis <edavis@broadcom.com>
5 * David Christensen <davidch@broadcom.com>
6 * Gary Zambrano <zambrano@broadcom.com>
8 * Copyright (c) 2013-2015 Brocade Communications Systems, Inc.
9 * Copyright (c) 2015 QLogic Corporation.
10 * All rights reserved.
13 * See LICENSE.bnx2x_pmd for copyright and licensing details.
16 #define BNX2X_DRIVER_VERSION "1.78.18"
19 #include "bnx2x_vfpf.h"
21 #include "ecore_init.h"
22 #include "ecore_init_ops.h"
24 #include "rte_version.h"
26 #include <sys/types.h>
31 #define BNX2X_PMD_VER_PREFIX "BNX2X PMD"
32 #define BNX2X_PMD_VERSION_MAJOR 1
33 #define BNX2X_PMD_VERSION_MINOR 0
34 #define BNX2X_PMD_VERSION_REVISION 1
35 #define BNX2X_PMD_VERSION_PATCH 1
37 static inline const char *
38 bnx2x_pmd_version(void)
40 static char version[32];
42 snprintf(version, sizeof(version), "%s %s_%d.%d.%d.%d",
45 BNX2X_PMD_VERSION_MAJOR,
46 BNX2X_PMD_VERSION_MINOR,
47 BNX2X_PMD_VERSION_REVISION,
48 BNX2X_PMD_VERSION_PATCH);
53 static z_stream zlib_stream;
55 #define EVL_VLID_MASK 0x0FFF
57 #define BNX2X_DEF_SB_ATT_IDX 0x0001
58 #define BNX2X_DEF_SB_IDX 0x0002
61 * FLR Support - bnx2x_pf_flr_clnup() is called during nic_load in the per
62 * function HW initialization.
64 #define FLR_WAIT_USEC 10000 /* 10 msecs */
65 #define FLR_WAIT_INTERVAL 50 /* usecs */
66 #define FLR_POLL_CNT (FLR_WAIT_USEC / FLR_WAIT_INTERVAL) /* 200 */
68 struct pbf_pN_buf_regs {
75 struct pbf_pN_cmd_regs {
81 /* resources needed for unloading a previously loaded device */
83 #define BNX2X_PREV_WAIT_NEEDED 1
84 rte_spinlock_t bnx2x_prev_mtx;
85 struct bnx2x_prev_list_node {
86 LIST_ENTRY(bnx2x_prev_list_node) node;
94 static LIST_HEAD(, bnx2x_prev_list_node) bnx2x_prev_list
95 = LIST_HEAD_INITIALIZER(bnx2x_prev_list);
97 static int load_count[2][3] = { { 0 } };
98 /* per-path: 0-common, 1-port0, 2-port1 */
100 static void bnx2x_cmng_fns_init(struct bnx2x_softc *sc, uint8_t read_cfg,
102 static int bnx2x_get_cmng_fns_mode(struct bnx2x_softc *sc);
103 static void storm_memset_cmng(struct bnx2x_softc *sc, struct cmng_init *cmng,
105 static void bnx2x_set_reset_global(struct bnx2x_softc *sc);
106 static void bnx2x_set_reset_in_progress(struct bnx2x_softc *sc);
107 static uint8_t bnx2x_reset_is_done(struct bnx2x_softc *sc, int engine);
108 static uint8_t bnx2x_clear_pf_load(struct bnx2x_softc *sc);
109 static uint8_t bnx2x_chk_parity_attn(struct bnx2x_softc *sc, uint8_t * global,
111 static void bnx2x_int_disable(struct bnx2x_softc *sc);
112 static int bnx2x_release_leader_lock(struct bnx2x_softc *sc);
113 static void bnx2x_pf_disable(struct bnx2x_softc *sc);
114 static void bnx2x_update_rx_prod(struct bnx2x_softc *sc,
115 struct bnx2x_fastpath *fp,
116 uint16_t rx_bd_prod, uint16_t rx_cq_prod);
117 static void bnx2x_link_report(struct bnx2x_softc *sc);
118 void bnx2x_link_status_update(struct bnx2x_softc *sc);
119 static int bnx2x_alloc_mem(struct bnx2x_softc *sc);
120 static void bnx2x_free_mem(struct bnx2x_softc *sc);
121 static int bnx2x_alloc_fw_stats_mem(struct bnx2x_softc *sc);
122 static void bnx2x_free_fw_stats_mem(struct bnx2x_softc *sc);
123 static __attribute__ ((noinline))
124 int bnx2x_nic_load(struct bnx2x_softc *sc);
126 static int bnx2x_handle_sp_tq(struct bnx2x_softc *sc);
127 static void bnx2x_handle_fp_tq(struct bnx2x_fastpath *fp, int scan_fp);
128 static void bnx2x_periodic_stop(struct bnx2x_softc *sc);
129 static void bnx2x_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id,
130 uint8_t storm, uint16_t index, uint8_t op,
133 int bnx2x_test_bit(int nr, volatile unsigned long *addr)
138 res = ((*addr) & (1UL << nr)) != 0;
143 void bnx2x_set_bit(unsigned int nr, volatile unsigned long *addr)
145 __sync_fetch_and_or(addr, (1UL << nr));
148 void bnx2x_clear_bit(int nr, volatile unsigned long *addr)
150 __sync_fetch_and_and(addr, ~(1UL << nr));
153 int bnx2x_test_and_clear_bit(int nr, volatile unsigned long *addr)
155 unsigned long mask = (1UL << nr);
156 return __sync_fetch_and_and(addr, ~mask) & mask;
159 int bnx2x_cmpxchg(volatile int *addr, int old, int new)
161 return __sync_val_compare_and_swap(addr, old, new);
165 bnx2x_dma_alloc(struct bnx2x_softc *sc, size_t size, struct bnx2x_dma *dma,
166 const char *msg, uint32_t align)
168 char mz_name[RTE_MEMZONE_NAMESIZE];
169 const struct rte_memzone *z;
173 sprintf(mz_name, "bnx2x%d_%s_%" PRIx64, SC_ABS_FUNC(sc), msg,
174 rte_get_timer_cycles());
176 sprintf(mz_name, "bnx2x%d_%s_%" PRIx64, sc->pcie_device, msg,
177 rte_get_timer_cycles());
179 /* Caller must take care that strlen(mz_name) < RTE_MEMZONE_NAMESIZE */
180 z = rte_memzone_reserve_aligned(mz_name, (uint64_t) (size),
184 PMD_DRV_LOG(ERR, "DMA alloc failed for %s", msg);
187 dma->paddr = (uint64_t) z->phys_addr;
188 dma->vaddr = z->addr;
190 PMD_DRV_LOG(DEBUG, "%s: virt=%p phys=%" PRIx64, msg, dma->vaddr, dma->paddr);
195 static int bnx2x_acquire_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
197 uint32_t lock_status;
198 uint32_t resource_bit = (1 << resource);
199 int func = SC_FUNC(sc);
200 uint32_t hw_lock_control_reg;
203 PMD_INIT_FUNC_TRACE();
205 /* validate the resource is within range */
206 if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
208 "resource 0x%x > HW_LOCK_MAX_RESOURCE_VALUE",
214 hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + (func * 8));
216 hw_lock_control_reg =
217 (MISC_REG_DRIVER_CONTROL_7 + ((func - 6) * 8));
220 /* validate the resource is not already taken */
221 lock_status = REG_RD(sc, hw_lock_control_reg);
222 if (lock_status & resource_bit) {
224 "resource in use (status 0x%x bit 0x%x)",
225 lock_status, resource_bit);
229 /* try every 5ms for 5 seconds */
230 for (cnt = 0; cnt < 1000; cnt++) {
231 REG_WR(sc, (hw_lock_control_reg + 4), resource_bit);
232 lock_status = REG_RD(sc, hw_lock_control_reg);
233 if (lock_status & resource_bit) {
239 PMD_DRV_LOG(NOTICE, "Resource lock timeout!");
243 static int bnx2x_release_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
245 uint32_t lock_status;
246 uint32_t resource_bit = (1 << resource);
247 int func = SC_FUNC(sc);
248 uint32_t hw_lock_control_reg;
250 PMD_INIT_FUNC_TRACE();
252 /* validate the resource is within range */
253 if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
255 "resource 0x%x > HW_LOCK_MAX_RESOURCE_VALUE",
261 hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + (func * 8));
263 hw_lock_control_reg =
264 (MISC_REG_DRIVER_CONTROL_7 + ((func - 6) * 8));
267 /* validate the resource is currently taken */
268 lock_status = REG_RD(sc, hw_lock_control_reg);
269 if (!(lock_status & resource_bit)) {
271 "resource not in use (status 0x%x bit 0x%x)",
272 lock_status, resource_bit);
276 REG_WR(sc, hw_lock_control_reg, resource_bit);
280 /* copy command into DMAE command memory and set DMAE command Go */
281 void bnx2x_post_dmae(struct bnx2x_softc *sc, struct dmae_command *dmae, int idx)
286 cmd_offset = (DMAE_REG_CMD_MEM + (sizeof(struct dmae_command) * idx));
287 for (i = 0; i < ((sizeof(struct dmae_command) / 4)); i++) {
288 REG_WR(sc, (cmd_offset + (i * 4)), *(((uint32_t *) dmae) + i));
291 REG_WR(sc, dmae_reg_go_c[idx], 1);
294 uint32_t bnx2x_dmae_opcode_add_comp(uint32_t opcode, uint8_t comp_type)
296 return opcode | ((comp_type << DMAE_COMMAND_C_DST_SHIFT) |
297 DMAE_COMMAND_C_TYPE_ENABLE);
300 uint32_t bnx2x_dmae_opcode_clr_src_reset(uint32_t opcode)
302 return opcode & ~DMAE_COMMAND_SRC_RESET;
306 bnx2x_dmae_opcode(struct bnx2x_softc * sc, uint8_t src_type, uint8_t dst_type,
307 uint8_t with_comp, uint8_t comp_type)
311 opcode |= ((src_type << DMAE_COMMAND_SRC_SHIFT) |
312 (dst_type << DMAE_COMMAND_DST_SHIFT));
314 opcode |= (DMAE_COMMAND_SRC_RESET | DMAE_COMMAND_DST_RESET);
316 opcode |= (SC_PORT(sc) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0);
318 opcode |= ((SC_VN(sc) << DMAE_COMMAND_E1HVN_SHIFT) |
319 (SC_VN(sc) << DMAE_COMMAND_DST_VN_SHIFT));
321 opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT);
324 opcode |= DMAE_CMD_ENDIANITY_B_DW_SWAP;
326 opcode |= DMAE_CMD_ENDIANITY_DW_SWAP;
330 opcode = bnx2x_dmae_opcode_add_comp(opcode, comp_type);
337 bnx2x_prep_dmae_with_comp(struct bnx2x_softc *sc, struct dmae_command *dmae,
338 uint8_t src_type, uint8_t dst_type)
340 memset(dmae, 0, sizeof(struct dmae_command));
343 dmae->opcode = bnx2x_dmae_opcode(sc, src_type, dst_type,
344 TRUE, DMAE_COMP_PCI);
346 /* fill in the completion parameters */
347 dmae->comp_addr_lo = U64_LO(BNX2X_SP_MAPPING(sc, wb_comp));
348 dmae->comp_addr_hi = U64_HI(BNX2X_SP_MAPPING(sc, wb_comp));
349 dmae->comp_val = DMAE_COMP_VAL;
352 /* issue a DMAE command over the init channel and wait for completion */
354 bnx2x_issue_dmae_with_comp(struct bnx2x_softc *sc, struct dmae_command *dmae)
356 uint32_t *wb_comp = BNX2X_SP(sc, wb_comp);
357 int timeout = CHIP_REV_IS_SLOW(sc) ? 400000 : 4000;
359 /* reset completion */
362 /* post the command on the channel used for initializations */
363 bnx2x_post_dmae(sc, dmae, INIT_DMAE_C(sc));
365 /* wait for completion */
368 while ((*wb_comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) {
370 (sc->recovery_state != BNX2X_RECOVERY_DONE &&
371 sc->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) {
372 PMD_DRV_LOG(INFO, "DMAE timeout!");
380 if (*wb_comp & DMAE_PCI_ERR_FLAG) {
381 PMD_DRV_LOG(INFO, "DMAE PCI error!");
382 return DMAE_PCI_ERROR;
388 void bnx2x_read_dmae(struct bnx2x_softc *sc, uint32_t src_addr, uint32_t len32)
390 struct dmae_command dmae;
395 if (!sc->dmae_ready) {
396 data = BNX2X_SP(sc, wb_data[0]);
398 for (i = 0; i < len32; i++) {
399 data[i] = REG_RD(sc, (src_addr + (i * 4)));
405 /* set opcode and fixed command fields */
406 bnx2x_prep_dmae_with_comp(sc, &dmae, DMAE_SRC_GRC, DMAE_DST_PCI);
408 /* fill in addresses and len */
409 dmae.src_addr_lo = (src_addr >> 2); /* GRC addr has dword resolution */
410 dmae.src_addr_hi = 0;
411 dmae.dst_addr_lo = U64_LO(BNX2X_SP_MAPPING(sc, wb_data));
412 dmae.dst_addr_hi = U64_HI(BNX2X_SP_MAPPING(sc, wb_data));
415 /* issue the command and wait for completion */
416 if ((rc = bnx2x_issue_dmae_with_comp(sc, &dmae)) != 0) {
417 rte_panic("DMAE failed (%d)", rc);
422 bnx2x_write_dmae(struct bnx2x_softc *sc, phys_addr_t dma_addr, uint32_t dst_addr,
425 struct dmae_command dmae;
428 if (!sc->dmae_ready) {
429 ecore_init_str_wr(sc, dst_addr, BNX2X_SP(sc, wb_data[0]), len32);
433 /* set opcode and fixed command fields */
434 bnx2x_prep_dmae_with_comp(sc, &dmae, DMAE_SRC_PCI, DMAE_DST_GRC);
436 /* fill in addresses and len */
437 dmae.src_addr_lo = U64_LO(dma_addr);
438 dmae.src_addr_hi = U64_HI(dma_addr);
439 dmae.dst_addr_lo = (dst_addr >> 2); /* GRC addr has dword resolution */
440 dmae.dst_addr_hi = 0;
443 /* issue the command and wait for completion */
444 if ((rc = bnx2x_issue_dmae_with_comp(sc, &dmae)) != 0) {
445 rte_panic("DMAE failed (%d)", rc);
450 bnx2x_write_dmae_phys_len(struct bnx2x_softc *sc, phys_addr_t phys_addr,
451 uint32_t addr, uint32_t len)
453 uint32_t dmae_wr_max = DMAE_LEN32_WR_MAX(sc);
456 while (len > dmae_wr_max) {
457 bnx2x_write_dmae(sc, (phys_addr + offset), /* src DMA address */
458 (addr + offset), /* dst GRC address */
460 offset += (dmae_wr_max * 4);
464 bnx2x_write_dmae(sc, (phys_addr + offset), /* src DMA address */
465 (addr + offset), /* dst GRC address */
470 bnx2x_set_ctx_validation(struct bnx2x_softc *sc, struct eth_context *cxt,
473 /* ustorm cxt validation */
474 cxt->ustorm_ag_context.cdu_usage =
475 CDU_RSRVD_VALUE_TYPE_A(HW_CID(sc, cid),
476 CDU_REGION_NUMBER_UCM_AG,
477 ETH_CONNECTION_TYPE);
478 /* xcontext validation */
479 cxt->xstorm_ag_context.cdu_reserved =
480 CDU_RSRVD_VALUE_TYPE_A(HW_CID(sc, cid),
481 CDU_REGION_NUMBER_XCM_AG,
482 ETH_CONNECTION_TYPE);
486 bnx2x_storm_memset_hc_timeout(struct bnx2x_softc *sc, uint8_t fw_sb_id,
487 uint8_t sb_index, uint8_t ticks)
490 (BAR_CSTRORM_INTMEM +
491 CSTORM_STATUS_BLOCK_DATA_TIMEOUT_OFFSET(fw_sb_id, sb_index));
493 REG_WR8(sc, addr, ticks);
497 bnx2x_storm_memset_hc_disable(struct bnx2x_softc *sc, uint16_t fw_sb_id,
498 uint8_t sb_index, uint8_t disable)
500 uint32_t enable_flag =
501 (disable) ? 0 : (1 << HC_INDEX_DATA_HC_ENABLED_SHIFT);
503 (BAR_CSTRORM_INTMEM +
504 CSTORM_STATUS_BLOCK_DATA_FLAGS_OFFSET(fw_sb_id, sb_index));
508 flags = REG_RD8(sc, addr);
509 flags &= ~HC_INDEX_DATA_HC_ENABLED;
510 flags |= enable_flag;
511 REG_WR8(sc, addr, flags);
515 bnx2x_update_coalesce_sb_index(struct bnx2x_softc *sc, uint8_t fw_sb_id,
516 uint8_t sb_index, uint8_t disable, uint16_t usec)
518 uint8_t ticks = (usec / 4);
520 bnx2x_storm_memset_hc_timeout(sc, fw_sb_id, sb_index, ticks);
522 disable = (disable) ? 1 : ((usec) ? 0 : 1);
523 bnx2x_storm_memset_hc_disable(sc, fw_sb_id, sb_index, disable);
526 uint32_t elink_cb_reg_read(struct bnx2x_softc *sc, uint32_t reg_addr)
528 return REG_RD(sc, reg_addr);
531 void elink_cb_reg_write(struct bnx2x_softc *sc, uint32_t reg_addr, uint32_t val)
533 REG_WR(sc, reg_addr, val);
537 elink_cb_event_log(__rte_unused struct bnx2x_softc *sc,
538 __rte_unused const elink_log_id_t elink_log_id, ...)
540 PMD_DRV_LOG(DEBUG, "ELINK EVENT LOG (%d)", elink_log_id);
543 static int bnx2x_set_spio(struct bnx2x_softc *sc, int spio, uint32_t mode)
547 /* Only 2 SPIOs are configurable */
548 if ((spio != MISC_SPIO_SPIO4) && (spio != MISC_SPIO_SPIO5)) {
549 PMD_DRV_LOG(NOTICE, "Invalid SPIO 0x%x", spio);
553 bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_SPIO);
555 /* read SPIO and mask except the float bits */
556 spio_reg = (REG_RD(sc, MISC_REG_SPIO) & MISC_SPIO_FLOAT);
559 case MISC_SPIO_OUTPUT_LOW:
560 /* clear FLOAT and set CLR */
561 spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
562 spio_reg |= (spio << MISC_SPIO_CLR_POS);
565 case MISC_SPIO_OUTPUT_HIGH:
566 /* clear FLOAT and set SET */
567 spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
568 spio_reg |= (spio << MISC_SPIO_SET_POS);
571 case MISC_SPIO_INPUT_HI_Z:
573 spio_reg |= (spio << MISC_SPIO_FLOAT_POS);
580 REG_WR(sc, MISC_REG_SPIO, spio_reg);
581 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_SPIO);
586 static int bnx2x_gpio_read(struct bnx2x_softc *sc, int gpio_num, uint8_t port)
588 /* The GPIO should be swapped if swap register is set and active */
589 int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
590 REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
591 int gpio_shift = gpio_num;
593 gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;
595 uint32_t gpio_mask = (1 << gpio_shift);
598 if (gpio_num > MISC_REGISTERS_GPIO_3) {
599 PMD_DRV_LOG(NOTICE, "Invalid GPIO %d", gpio_num);
603 /* read GPIO value */
604 gpio_reg = REG_RD(sc, MISC_REG_GPIO);
606 /* get the requested pin value */
607 return ((gpio_reg & gpio_mask) == gpio_mask) ? 1 : 0;
611 bnx2x_gpio_write(struct bnx2x_softc *sc, int gpio_num, uint32_t mode, uint8_t port)
613 /* The GPIO should be swapped if swap register is set and active */
614 int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
615 REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
616 int gpio_shift = gpio_num;
618 gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;
620 uint32_t gpio_mask = (1 << gpio_shift);
623 if (gpio_num > MISC_REGISTERS_GPIO_3) {
624 PMD_DRV_LOG(NOTICE, "Invalid GPIO %d", gpio_num);
628 bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
630 /* read GPIO and mask except the float bits */
631 gpio_reg = (REG_RD(sc, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
634 case MISC_REGISTERS_GPIO_OUTPUT_LOW:
635 /* clear FLOAT and set CLR */
636 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
637 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
640 case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
641 /* clear FLOAT and set SET */
642 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
643 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
646 case MISC_REGISTERS_GPIO_INPUT_HI_Z:
648 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
655 REG_WR(sc, MISC_REG_GPIO, gpio_reg);
656 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
662 bnx2x_gpio_mult_write(struct bnx2x_softc *sc, uint8_t pins, uint32_t mode)
666 /* any port swapping should be handled by caller */
668 bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
670 /* read GPIO and mask except the float bits */
671 gpio_reg = REG_RD(sc, MISC_REG_GPIO);
672 gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_FLOAT_POS);
673 gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_CLR_POS);
674 gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_SET_POS);
677 case MISC_REGISTERS_GPIO_OUTPUT_LOW:
679 gpio_reg |= (pins << MISC_REGISTERS_GPIO_CLR_POS);
682 case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
684 gpio_reg |= (pins << MISC_REGISTERS_GPIO_SET_POS);
687 case MISC_REGISTERS_GPIO_INPUT_HI_Z:
689 gpio_reg |= (pins << MISC_REGISTERS_GPIO_FLOAT_POS);
693 PMD_DRV_LOG(NOTICE, "Invalid GPIO mode assignment %d", mode);
694 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
698 REG_WR(sc, MISC_REG_GPIO, gpio_reg);
699 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
705 bnx2x_gpio_int_write(struct bnx2x_softc *sc, int gpio_num, uint32_t mode,
708 /* The GPIO should be swapped if swap register is set and active */
709 int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
710 REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
711 int gpio_shift = gpio_num;
713 gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;
715 uint32_t gpio_mask = (1 << gpio_shift);
718 if (gpio_num > MISC_REGISTERS_GPIO_3) {
719 PMD_DRV_LOG(NOTICE, "Invalid GPIO %d", gpio_num);
723 bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
726 gpio_reg = REG_RD(sc, MISC_REG_GPIO_INT);
729 case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR:
730 /* clear SET and set CLR */
731 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
732 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
735 case MISC_REGISTERS_GPIO_INT_OUTPUT_SET:
736 /* clear CLR and set SET */
737 gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
738 gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
745 REG_WR(sc, MISC_REG_GPIO_INT, gpio_reg);
746 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
752 elink_cb_gpio_read(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t port)
754 return bnx2x_gpio_read(sc, gpio_num, port);
757 uint8_t elink_cb_gpio_write(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t mode, /* 0=low 1=high */
760 return bnx2x_gpio_write(sc, gpio_num, mode, port);
764 elink_cb_gpio_mult_write(struct bnx2x_softc * sc, uint8_t pins,
765 uint8_t mode /* 0=low 1=high */ )
767 return bnx2x_gpio_mult_write(sc, pins, mode);
770 uint8_t elink_cb_gpio_int_write(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t mode, /* 0=low 1=high */
773 return bnx2x_gpio_int_write(sc, gpio_num, mode, port);
776 void elink_cb_notify_link_changed(struct bnx2x_softc *sc)
778 REG_WR(sc, (MISC_REG_AEU_GENERAL_ATTN_12 +
779 (SC_FUNC(sc) * sizeof(uint32_t))), 1);
782 /* send the MCP a request, block until there is a reply */
784 elink_cb_fw_command(struct bnx2x_softc *sc, uint32_t command, uint32_t param)
786 int mb_idx = SC_FW_MB_IDX(sc);
790 uint8_t delay = CHIP_REV_IS_SLOW(sc) ? 100 : 10;
793 SHMEM_WR(sc, func_mb[mb_idx].drv_mb_param, param);
794 SHMEM_WR(sc, func_mb[mb_idx].drv_mb_header, (command | seq));
797 "wrote command 0x%08x to FW MB param 0x%08x",
798 (command | seq), param);
800 /* Let the FW do it's magic. GIve it up to 5 seconds... */
803 rc = SHMEM_RD(sc, func_mb[mb_idx].fw_mb_header);
804 } while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500));
806 /* is this a reply to our command? */
807 if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
808 rc &= FW_MSG_CODE_MASK;
811 PMD_DRV_LOG(NOTICE, "FW failed to respond!");
819 bnx2x_fw_command(struct bnx2x_softc *sc, uint32_t command, uint32_t param)
821 return elink_cb_fw_command(sc, command, param);
825 __storm_memset_dma_mapping(struct bnx2x_softc *sc, uint32_t addr,
828 REG_WR(sc, addr, U64_LO(mapping));
829 REG_WR(sc, (addr + 4), U64_HI(mapping));
833 storm_memset_spq_addr(struct bnx2x_softc *sc, phys_addr_t mapping,
836 uint32_t addr = (XSEM_REG_FAST_MEMORY +
837 XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid));
838 __storm_memset_dma_mapping(sc, addr, mapping);
842 storm_memset_vf_to_pf(struct bnx2x_softc *sc, uint16_t abs_fid, uint16_t pf_id)
844 REG_WR8(sc, (BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid)),
846 REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid)),
848 REG_WR8(sc, (BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid)),
850 REG_WR8(sc, (BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid)),
855 storm_memset_func_en(struct bnx2x_softc *sc, uint16_t abs_fid, uint8_t enable)
857 REG_WR8(sc, (BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid)),
859 REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid)),
861 REG_WR8(sc, (BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid)),
863 REG_WR8(sc, (BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid)),
868 storm_memset_eq_data(struct bnx2x_softc *sc, struct event_ring_data *eq_data,
874 addr = (BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_DATA_OFFSET(pfid));
875 size = sizeof(struct event_ring_data);
876 ecore_storm_memset_struct(sc, addr, size, (uint32_t *) eq_data);
880 storm_memset_eq_prod(struct bnx2x_softc *sc, uint16_t eq_prod, uint16_t pfid)
882 uint32_t addr = (BAR_CSTRORM_INTMEM +
883 CSTORM_EVENT_RING_PROD_OFFSET(pfid));
884 REG_WR16(sc, addr, eq_prod);
888 * Post a slowpath command.
890 * A slowpath command is used to propogate a configuration change through
891 * the controller in a controlled manner, allowing each STORM processor and
892 * other H/W blocks to phase in the change. The commands sent on the
893 * slowpath are referred to as ramrods. Depending on the ramrod used the
894 * completion of the ramrod will occur in different ways. Here's a
895 * breakdown of ramrods and how they complete:
897 * RAMROD_CMD_ID_ETH_PORT_SETUP
898 * Used to setup the leading connection on a port. Completes on the
899 * Receive Completion Queue (RCQ) of that port (typically fp[0]).
901 * RAMROD_CMD_ID_ETH_CLIENT_SETUP
902 * Used to setup an additional connection on a port. Completes on the
903 * RCQ of the multi-queue/RSS connection being initialized.
905 * RAMROD_CMD_ID_ETH_STAT_QUERY
906 * Used to force the storm processors to update the statistics database
907 * in host memory. This ramrod is send on the leading connection CID and
908 * completes as an index increment of the CSTORM on the default status
911 * RAMROD_CMD_ID_ETH_UPDATE
912 * Used to update the state of the leading connection, usually to udpate
913 * the RSS indirection table. Completes on the RCQ of the leading
914 * connection. (Not currently used under FreeBSD until OS support becomes
917 * RAMROD_CMD_ID_ETH_HALT
918 * Used when tearing down a connection prior to driver unload. Completes
919 * on the RCQ of the multi-queue/RSS connection being torn down. Don't
920 * use this on the leading connection.
922 * RAMROD_CMD_ID_ETH_SET_MAC
923 * Sets the Unicast/Broadcast/Multicast used by the port. Completes on
924 * the RCQ of the leading connection.
926 * RAMROD_CMD_ID_ETH_CFC_DEL
927 * Used when tearing down a conneciton prior to driver unload. Completes
928 * on the RCQ of the leading connection (since the current connection
929 * has been completely removed from controller memory).
931 * RAMROD_CMD_ID_ETH_PORT_DEL
932 * Used to tear down the leading connection prior to driver unload,
933 * typically fp[0]. Completes as an index increment of the CSTORM on the
934 * default status block.
936 * RAMROD_CMD_ID_ETH_FORWARD_SETUP
937 * Used for connection offload. Completes on the RCQ of the multi-queue
938 * RSS connection that is being offloaded. (Not currently used under
941 * There can only be one command pending per function.
944 * 0 = Success, !0 = Failure.
947 /* must be called under the spq lock */
948 static inline struct eth_spe *bnx2x_sp_get_next(struct bnx2x_softc *sc)
950 struct eth_spe *next_spe = sc->spq_prod_bd;
952 if (sc->spq_prod_bd == sc->spq_last_bd) {
953 /* wrap back to the first eth_spq */
954 sc->spq_prod_bd = sc->spq;
955 sc->spq_prod_idx = 0;
964 /* must be called under the spq lock */
965 static void bnx2x_sp_prod_update(struct bnx2x_softc *sc)
967 int func = SC_FUNC(sc);
970 * Make sure that BD data is updated before writing the producer.
971 * BD data is written to the memory, the producer is read from the
972 * memory, thus we need a full memory barrier to ensure the ordering.
976 REG_WR16(sc, (BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func)),
983 * bnx2x_is_contextless_ramrod - check if the current command ends on EQ
985 * @cmd: command to check
986 * @cmd_type: command type
988 static int bnx2x_is_contextless_ramrod(int cmd, int cmd_type)
990 if ((cmd_type == NONE_CONNECTION_TYPE) ||
991 (cmd == RAMROD_CMD_ID_ETH_FORWARD_SETUP) ||
992 (cmd == RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES) ||
993 (cmd == RAMROD_CMD_ID_ETH_FILTER_RULES) ||
994 (cmd == RAMROD_CMD_ID_ETH_MULTICAST_RULES) ||
995 (cmd == RAMROD_CMD_ID_ETH_SET_MAC) ||
996 (cmd == RAMROD_CMD_ID_ETH_RSS_UPDATE)) {
1004 * bnx2x_sp_post - place a single command on an SP ring
1006 * @sc: driver handle
1007 * @command: command to place (e.g. SETUP, FILTER_RULES, etc.)
1008 * @cid: SW CID the command is related to
1009 * @data_hi: command private data address (high 32 bits)
1010 * @data_lo: command private data address (low 32 bits)
1011 * @cmd_type: command type (e.g. NONE, ETH)
1013 * SP data is handled as if it's always an address pair, thus data fields are
1014 * not swapped to little endian in upper functions. Instead this function swaps
1015 * data as if it's two uint32 fields.
1018 bnx2x_sp_post(struct bnx2x_softc *sc, int command, int cid, uint32_t data_hi,
1019 uint32_t data_lo, int cmd_type)
1021 struct eth_spe *spe;
1025 common = bnx2x_is_contextless_ramrod(command, cmd_type);
1028 if (!atomic_load_acq_long(&sc->eq_spq_left)) {
1029 PMD_DRV_LOG(INFO, "EQ ring is full!");
1033 if (!atomic_load_acq_long(&sc->cq_spq_left)) {
1034 PMD_DRV_LOG(INFO, "SPQ ring is full!");
1039 spe = bnx2x_sp_get_next(sc);
1041 /* CID needs port number to be encoded int it */
1042 spe->hdr.conn_and_cmd_data =
1043 htole32((command << SPE_HDR_CMD_ID_SHIFT) | HW_CID(sc, cid));
1045 type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) & SPE_HDR_CONN_TYPE;
1047 /* TBD: Check if it works for VFs */
1048 type |= ((SC_FUNC(sc) << SPE_HDR_FUNCTION_ID_SHIFT) &
1049 SPE_HDR_FUNCTION_ID);
1051 spe->hdr.type = htole16(type);
1053 spe->data.update_data_addr.hi = htole32(data_hi);
1054 spe->data.update_data_addr.lo = htole32(data_lo);
1057 * It's ok if the actual decrement is issued towards the memory
1058 * somewhere between the lock and unlock. Thus no more explict
1059 * memory barrier is needed.
1062 atomic_subtract_acq_long(&sc->eq_spq_left, 1);
1064 atomic_subtract_acq_long(&sc->cq_spq_left, 1);
1068 "SPQE[%x] (%x:%x) (cmd, common?) (%d,%d) hw_cid %x"
1069 "data (%x:%x) type(0x%x) left (CQ, EQ) (%lx,%lx)",
1071 (uint32_t) U64_HI(sc->spq_dma.paddr),
1072 (uint32_t) (U64_LO(sc->spq_dma.paddr) +
1073 (uint8_t *) sc->spq_prod_bd -
1074 (uint8_t *) sc->spq), command, common,
1075 HW_CID(sc, cid), data_hi, data_lo, type,
1076 atomic_load_acq_long(&sc->cq_spq_left),
1077 atomic_load_acq_long(&sc->eq_spq_left));
1079 bnx2x_sp_prod_update(sc);
1084 static void bnx2x_drv_pulse(struct bnx2x_softc *sc)
1086 SHMEM_WR(sc, func_mb[SC_FW_MB_IDX(sc)].drv_pulse_mb,
1087 sc->fw_drv_pulse_wr_seq);
1090 static int bnx2x_tx_queue_has_work(const struct bnx2x_fastpath *fp)
1093 struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
1095 if (unlikely(!txq)) {
1096 PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
1100 mb(); /* status block fields can change */
1101 hw_cons = le16toh(*fp->tx_cons_sb);
1102 return hw_cons != txq->tx_pkt_head;
1105 static uint8_t bnx2x_has_tx_work(struct bnx2x_fastpath *fp)
1107 /* expand this for multi-cos if ever supported */
1108 return bnx2x_tx_queue_has_work(fp);
1111 static int bnx2x_has_rx_work(struct bnx2x_fastpath *fp)
1113 uint16_t rx_cq_cons_sb;
1114 struct bnx2x_rx_queue *rxq;
1115 rxq = fp->sc->rx_queues[fp->index];
1116 if (unlikely(!rxq)) {
1117 PMD_RX_LOG(ERR, "ERROR: RX queue is NULL");
1121 mb(); /* status block fields can change */
1122 rx_cq_cons_sb = le16toh(*fp->rx_cq_cons_sb);
1123 if (unlikely((rx_cq_cons_sb & MAX_RCQ_ENTRIES(rxq)) ==
1124 MAX_RCQ_ENTRIES(rxq)))
1126 return rxq->rx_cq_head != rx_cq_cons_sb;
1130 bnx2x_sp_event(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
1131 union eth_rx_cqe *rr_cqe)
1133 #ifdef RTE_LIBRTE_BNX2X_DEBUG
1134 int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data);
1136 int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data);
1137 enum ecore_queue_cmd drv_cmd = ECORE_Q_CMD_MAX;
1138 struct ecore_queue_sp_obj *q_obj = &BNX2X_SP_OBJ(sc, fp).q_obj;
1141 "fp=%d cid=%d got ramrod #%d state is %x type is %d",
1142 fp->index, cid, command, sc->state,
1143 rr_cqe->ramrod_cqe.ramrod_type);
1146 case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE):
1147 PMD_DRV_LOG(DEBUG, "got UPDATE ramrod. CID %d", cid);
1148 drv_cmd = ECORE_Q_CMD_UPDATE;
1151 case (RAMROD_CMD_ID_ETH_CLIENT_SETUP):
1152 PMD_DRV_LOG(DEBUG, "got MULTI[%d] setup ramrod", cid);
1153 drv_cmd = ECORE_Q_CMD_SETUP;
1156 case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP):
1157 PMD_DRV_LOG(DEBUG, "got MULTI[%d] tx-only setup ramrod", cid);
1158 drv_cmd = ECORE_Q_CMD_SETUP_TX_ONLY;
1161 case (RAMROD_CMD_ID_ETH_HALT):
1162 PMD_DRV_LOG(DEBUG, "got MULTI[%d] halt ramrod", cid);
1163 drv_cmd = ECORE_Q_CMD_HALT;
1166 case (RAMROD_CMD_ID_ETH_TERMINATE):
1167 PMD_DRV_LOG(DEBUG, "got MULTI[%d] teminate ramrod", cid);
1168 drv_cmd = ECORE_Q_CMD_TERMINATE;
1171 case (RAMROD_CMD_ID_ETH_EMPTY):
1172 PMD_DRV_LOG(DEBUG, "got MULTI[%d] empty ramrod", cid);
1173 drv_cmd = ECORE_Q_CMD_EMPTY;
1178 "ERROR: unexpected MC reply (%d)"
1179 "on fp[%d]", command, fp->index);
1183 if ((drv_cmd != ECORE_Q_CMD_MAX) &&
1184 q_obj->complete_cmd(sc, q_obj, drv_cmd)) {
1186 * q_obj->complete_cmd() failure means that this was
1187 * an unexpected completion.
1189 * In this case we don't want to increase the sc->spq_left
1190 * because apparently we haven't sent this command the first
1193 // rte_panic("Unexpected SP completion");
1197 atomic_add_acq_long(&sc->cq_spq_left, 1);
1199 PMD_DRV_LOG(DEBUG, "sc->cq_spq_left 0x%lx",
1200 atomic_load_acq_long(&sc->cq_spq_left));
1203 static uint8_t bnx2x_rxeof(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp)
1205 struct bnx2x_rx_queue *rxq;
1206 uint16_t bd_cons, bd_prod, bd_prod_fw, comp_ring_cons;
1207 uint16_t hw_cq_cons, sw_cq_cons, sw_cq_prod;
1209 rxq = sc->rx_queues[fp->index];
1211 PMD_RX_LOG(ERR, "RX queue %d is NULL", fp->index);
1215 /* CQ "next element" is of the size of the regular element */
1216 hw_cq_cons = le16toh(*fp->rx_cq_cons_sb);
1217 if (unlikely((hw_cq_cons & USABLE_RCQ_ENTRIES_PER_PAGE) ==
1218 USABLE_RCQ_ENTRIES_PER_PAGE)) {
1222 bd_cons = rxq->rx_bd_head;
1223 bd_prod = rxq->rx_bd_tail;
1224 bd_prod_fw = bd_prod;
1225 sw_cq_cons = rxq->rx_cq_head;
1226 sw_cq_prod = rxq->rx_cq_tail;
1229 * Memory barrier necessary as speculative reads of the rx
1230 * buffer can be ahead of the index in the status block
1234 while (sw_cq_cons != hw_cq_cons) {
1235 union eth_rx_cqe *cqe;
1236 struct eth_fast_path_rx_cqe *cqe_fp;
1237 uint8_t cqe_fp_flags;
1238 enum eth_rx_cqe_type cqe_fp_type;
1240 comp_ring_cons = RCQ_ENTRY(sw_cq_cons, rxq);
1241 bd_prod = RX_BD(bd_prod, rxq);
1242 bd_cons = RX_BD(bd_cons, rxq);
1244 cqe = &rxq->cq_ring[comp_ring_cons];
1245 cqe_fp = &cqe->fast_path_cqe;
1246 cqe_fp_flags = cqe_fp->type_error_flags;
1247 cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE;
1249 /* is this a slowpath msg? */
1250 if (CQE_TYPE_SLOW(cqe_fp_type)) {
1251 bnx2x_sp_event(sc, fp, cqe);
1255 /* is this an error packet? */
1256 if (unlikely(cqe_fp_flags &
1257 ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG)) {
1258 PMD_RX_LOG(DEBUG, "flags 0x%x rx packet %u",
1259 cqe_fp_flags, sw_cq_cons);
1263 PMD_RX_LOG(DEBUG, "Dropping fastpath called from attn poller!");
1266 bd_cons = NEXT_RX_BD(bd_cons);
1267 bd_prod = NEXT_RX_BD(bd_prod);
1268 bd_prod_fw = NEXT_RX_BD(bd_prod_fw);
1271 sw_cq_prod = NEXT_RCQ_IDX(sw_cq_prod);
1272 sw_cq_cons = NEXT_RCQ_IDX(sw_cq_cons);
1274 } /* while work to do */
1276 rxq->rx_bd_head = bd_cons;
1277 rxq->rx_bd_tail = bd_prod_fw;
1278 rxq->rx_cq_head = sw_cq_cons;
1279 rxq->rx_cq_tail = sw_cq_prod;
1281 /* Update producers */
1282 bnx2x_update_rx_prod(sc, fp, bd_prod_fw, sw_cq_prod);
1284 return sw_cq_cons != hw_cq_cons;
1288 bnx2x_free_tx_pkt(__rte_unused struct bnx2x_fastpath *fp, struct bnx2x_tx_queue *txq,
1289 uint16_t pkt_idx, uint16_t bd_idx)
1291 struct eth_tx_start_bd *tx_start_bd =
1292 &txq->tx_ring[TX_BD(bd_idx, txq)].start_bd;
1293 uint16_t nbd = rte_le_to_cpu_16(tx_start_bd->nbd);
1294 struct rte_mbuf *tx_mbuf = txq->sw_ring[TX_BD(pkt_idx, txq)];
1296 if (likely(tx_mbuf != NULL)) {
1297 rte_pktmbuf_free_seg(tx_mbuf);
1299 PMD_RX_LOG(ERR, "fp[%02d] lost mbuf %lu",
1300 fp->index, (unsigned long)TX_BD(pkt_idx, txq));
1303 txq->sw_ring[TX_BD(pkt_idx, txq)] = NULL;
1304 txq->nb_tx_avail += nbd;
1307 bd_idx = NEXT_TX_BD(bd_idx);
1312 /* processes transmit completions */
1313 uint8_t bnx2x_txeof(__rte_unused struct bnx2x_softc * sc, struct bnx2x_fastpath * fp)
1315 uint16_t bd_cons, hw_cons, sw_cons;
1316 __rte_unused uint16_t tx_bd_avail;
1318 struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
1320 if (unlikely(!txq)) {
1321 PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
1325 bd_cons = txq->tx_bd_head;
1326 hw_cons = rte_le_to_cpu_16(*fp->tx_cons_sb);
1327 sw_cons = txq->tx_pkt_head;
1329 while (sw_cons != hw_cons) {
1330 bd_cons = bnx2x_free_tx_pkt(fp, txq, sw_cons, bd_cons);
1334 txq->tx_pkt_head = sw_cons;
1335 txq->tx_bd_head = bd_cons;
1337 tx_bd_avail = txq->nb_tx_avail;
1339 PMD_TX_LOG(DEBUG, "fp[%02d] avail=%u cons_sb=%u, "
1340 "pkt_head=%u pkt_tail=%u bd_head=%u bd_tail=%u",
1341 fp->index, tx_bd_avail, hw_cons,
1342 txq->tx_pkt_head, txq->tx_pkt_tail,
1343 txq->tx_bd_head, txq->tx_bd_tail);
1347 static void bnx2x_drain_tx_queues(struct bnx2x_softc *sc)
1349 struct bnx2x_fastpath *fp;
1352 /* wait until all TX fastpath tasks have completed */
1353 for (i = 0; i < sc->num_queues; i++) {
1358 while (bnx2x_has_tx_work(fp)) {
1359 bnx2x_txeof(sc, fp);
1363 "Timeout waiting for fp[%d] "
1364 "transmits to complete!", i);
1365 rte_panic("tx drain failure");
1379 bnx2x_del_all_macs(struct bnx2x_softc *sc, struct ecore_vlan_mac_obj *mac_obj,
1380 int mac_type, uint8_t wait_for_comp)
1382 unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
1385 /* wait for completion of requested */
1386 if (wait_for_comp) {
1387 bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
1390 /* Set the mac type of addresses we want to clear */
1391 bnx2x_set_bit(mac_type, &vlan_mac_flags);
1393 rc = mac_obj->delete_all(sc, mac_obj, &vlan_mac_flags, &ramrod_flags);
1395 PMD_DRV_LOG(ERR, "Failed to delete MACs (%d)", rc);
1401 bnx2x_fill_accept_flags(struct bnx2x_softc *sc, uint32_t rx_mode,
1402 unsigned long *rx_accept_flags,
1403 unsigned long *tx_accept_flags)
1405 /* Clear the flags first */
1406 *rx_accept_flags = 0;
1407 *tx_accept_flags = 0;
1410 case BNX2X_RX_MODE_NONE:
1412 * 'drop all' supersedes any accept flags that may have been
1413 * passed to the function.
1417 case BNX2X_RX_MODE_NORMAL:
1418 bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
1419 bnx2x_set_bit(ECORE_ACCEPT_MULTICAST, rx_accept_flags);
1420 bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
1422 /* internal switching mode */
1423 bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
1424 bnx2x_set_bit(ECORE_ACCEPT_MULTICAST, tx_accept_flags);
1425 bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
1429 case BNX2X_RX_MODE_ALLMULTI:
1430 bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
1431 bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
1432 bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
1434 /* internal switching mode */
1435 bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
1436 bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
1437 bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
1441 case BNX2X_RX_MODE_PROMISC:
1443 * According to deffinition of SI mode, iface in promisc mode
1444 * should receive matched and unmatched (in resolution of port)
1447 bnx2x_set_bit(ECORE_ACCEPT_UNMATCHED, rx_accept_flags);
1448 bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
1449 bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
1450 bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
1452 /* internal switching mode */
1453 bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
1454 bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
1457 bnx2x_set_bit(ECORE_ACCEPT_ALL_UNICAST, tx_accept_flags);
1459 bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
1465 PMD_RX_LOG(ERR, "Unknown rx_mode (%d)", rx_mode);
1469 /* Set ACCEPT_ANY_VLAN as we do not enable filtering by VLAN */
1470 if (rx_mode != BNX2X_RX_MODE_NONE) {
1471 bnx2x_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags);
1472 bnx2x_set_bit(ECORE_ACCEPT_ANY_VLAN, tx_accept_flags);
1479 bnx2x_set_q_rx_mode(struct bnx2x_softc *sc, uint8_t cl_id,
1480 unsigned long rx_mode_flags,
1481 unsigned long rx_accept_flags,
1482 unsigned long tx_accept_flags, unsigned long ramrod_flags)
1484 struct ecore_rx_mode_ramrod_params ramrod_param;
1487 memset(&ramrod_param, 0, sizeof(ramrod_param));
1489 /* Prepare ramrod parameters */
1490 ramrod_param.cid = 0;
1491 ramrod_param.cl_id = cl_id;
1492 ramrod_param.rx_mode_obj = &sc->rx_mode_obj;
1493 ramrod_param.func_id = SC_FUNC(sc);
1495 ramrod_param.pstate = &sc->sp_state;
1496 ramrod_param.state = ECORE_FILTER_RX_MODE_PENDING;
1498 ramrod_param.rdata = BNX2X_SP(sc, rx_mode_rdata);
1499 ramrod_param.rdata_mapping =
1500 (phys_addr_t)BNX2X_SP_MAPPING(sc, rx_mode_rdata),
1501 bnx2x_set_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);
1503 ramrod_param.ramrod_flags = ramrod_flags;
1504 ramrod_param.rx_mode_flags = rx_mode_flags;
1506 ramrod_param.rx_accept_flags = rx_accept_flags;
1507 ramrod_param.tx_accept_flags = tx_accept_flags;
1509 rc = ecore_config_rx_mode(sc, &ramrod_param);
1511 PMD_RX_LOG(ERR, "Set rx_mode %d failed", sc->rx_mode);
1518 int bnx2x_set_storm_rx_mode(struct bnx2x_softc *sc)
1520 unsigned long rx_mode_flags = 0, ramrod_flags = 0;
1521 unsigned long rx_accept_flags = 0, tx_accept_flags = 0;
1524 rc = bnx2x_fill_accept_flags(sc, sc->rx_mode, &rx_accept_flags,
1530 bnx2x_set_bit(RAMROD_RX, &ramrod_flags);
1531 bnx2x_set_bit(RAMROD_TX, &ramrod_flags);
1532 bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
1534 return bnx2x_set_q_rx_mode(sc, sc->fp[0].cl_id, rx_mode_flags,
1535 rx_accept_flags, tx_accept_flags,
1539 /* returns the "mcp load_code" according to global load_count array */
1540 static int bnx2x_nic_load_no_mcp(struct bnx2x_softc *sc)
1542 int path = SC_PATH(sc);
1543 int port = SC_PORT(sc);
1545 PMD_DRV_LOG(INFO, "NO MCP - load counts[%d] %d, %d, %d",
1546 path, load_count[path][0], load_count[path][1],
1547 load_count[path][2]);
1549 load_count[path][0]++;
1550 load_count[path][1 + port]++;
1551 PMD_DRV_LOG(INFO, "NO MCP - new load counts[%d] %d, %d, %d",
1552 path, load_count[path][0], load_count[path][1],
1553 load_count[path][2]);
1554 if (load_count[path][0] == 1)
1555 return FW_MSG_CODE_DRV_LOAD_COMMON;
1556 else if (load_count[path][1 + port] == 1)
1557 return FW_MSG_CODE_DRV_LOAD_PORT;
1559 return FW_MSG_CODE_DRV_LOAD_FUNCTION;
1562 /* returns the "mcp load_code" according to global load_count array */
1563 static int bnx2x_nic_unload_no_mcp(struct bnx2x_softc *sc)
1565 int port = SC_PORT(sc);
1566 int path = SC_PATH(sc);
1568 PMD_DRV_LOG(INFO, "NO MCP - load counts[%d] %d, %d, %d",
1569 path, load_count[path][0], load_count[path][1],
1570 load_count[path][2]);
1571 load_count[path][0]--;
1572 load_count[path][1 + port]--;
1573 PMD_DRV_LOG(INFO, "NO MCP - new load counts[%d] %d, %d, %d",
1574 path, load_count[path][0], load_count[path][1],
1575 load_count[path][2]);
1576 if (load_count[path][0] == 0) {
1577 return FW_MSG_CODE_DRV_UNLOAD_COMMON;
1578 } else if (load_count[path][1 + port] == 0) {
1579 return FW_MSG_CODE_DRV_UNLOAD_PORT;
1581 return FW_MSG_CODE_DRV_UNLOAD_FUNCTION;
1585 /* request unload mode from the MCP: COMMON, PORT or FUNCTION */
1586 static uint32_t bnx2x_send_unload_req(struct bnx2x_softc *sc, int unload_mode)
1588 uint32_t reset_code = 0;
1590 /* Select the UNLOAD request mode */
1591 if (unload_mode == UNLOAD_NORMAL) {
1592 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
1594 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
1597 /* Send the request to the MCP */
1598 if (!BNX2X_NOMCP(sc)) {
1599 reset_code = bnx2x_fw_command(sc, reset_code, 0);
1601 reset_code = bnx2x_nic_unload_no_mcp(sc);
1607 /* send UNLOAD_DONE command to the MCP */
1608 static void bnx2x_send_unload_done(struct bnx2x_softc *sc, uint8_t keep_link)
1610 uint32_t reset_param =
1611 keep_link ? DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET : 0;
1613 /* Report UNLOAD_DONE to MCP */
1614 if (!BNX2X_NOMCP(sc)) {
1615 bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, reset_param);
1619 static int bnx2x_func_wait_started(struct bnx2x_softc *sc)
1623 if (!sc->port.pmf) {
1628 * (assumption: No Attention from MCP at this stage)
1629 * PMF probably in the middle of TX disable/enable transaction
1630 * 1. Sync IRS for default SB
1631 * 2. Sync SP queue - this guarantees us that attention handling started
1632 * 3. Wait, that TX disable/enable transaction completes
1634 * 1+2 guarantee that if DCBX attention was scheduled it already changed
1635 * pending bit of transaction from STARTED-->TX_STOPPED, if we already
1636 * received completion for the transaction the state is TX_STOPPED.
1637 * State will return to STARTED after completion of TX_STOPPED-->STARTED
1641 while (ecore_func_get_state(sc, &sc->func_obj) !=
1642 ECORE_F_STATE_STARTED && tout--) {
1646 if (ecore_func_get_state(sc, &sc->func_obj) != ECORE_F_STATE_STARTED) {
1648 * Failed to complete the transaction in a "good way"
1649 * Force both transactions with CLR bit.
1651 struct ecore_func_state_params func_params = { NULL };
1653 PMD_DRV_LOG(NOTICE, "Unexpected function state! "
1654 "Forcing STARTED-->TX_STOPPED-->STARTED");
1656 func_params.f_obj = &sc->func_obj;
1657 bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
1659 /* STARTED-->TX_STOPPED */
1660 func_params.cmd = ECORE_F_CMD_TX_STOP;
1661 ecore_func_state_change(sc, &func_params);
1663 /* TX_STOPPED-->STARTED */
1664 func_params.cmd = ECORE_F_CMD_TX_START;
1665 return ecore_func_state_change(sc, &func_params);
1671 static int bnx2x_stop_queue(struct bnx2x_softc *sc, int index)
1673 struct bnx2x_fastpath *fp = &sc->fp[index];
1674 struct ecore_queue_state_params q_params = { NULL };
1677 PMD_DRV_LOG(DEBUG, "stopping queue %d cid %d", index, fp->index);
1679 q_params.q_obj = &sc->sp_objs[fp->index].q_obj;
1680 /* We want to wait for completion in this context */
1681 bnx2x_set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
1683 /* Stop the primary connection: */
1685 /* ...halt the connection */
1686 q_params.cmd = ECORE_Q_CMD_HALT;
1687 rc = ecore_queue_state_change(sc, &q_params);
1692 /* ...terminate the connection */
1693 q_params.cmd = ECORE_Q_CMD_TERMINATE;
1694 memset(&q_params.params.terminate, 0,
1695 sizeof(q_params.params.terminate));
1696 q_params.params.terminate.cid_index = FIRST_TX_COS_INDEX;
1697 rc = ecore_queue_state_change(sc, &q_params);
1702 /* ...delete cfc entry */
1703 q_params.cmd = ECORE_Q_CMD_CFC_DEL;
1704 memset(&q_params.params.cfc_del, 0, sizeof(q_params.params.cfc_del));
1705 q_params.params.cfc_del.cid_index = FIRST_TX_COS_INDEX;
1706 return ecore_queue_state_change(sc, &q_params);
1709 /* wait for the outstanding SP commands */
1710 static uint8_t bnx2x_wait_sp_comp(struct bnx2x_softc *sc, unsigned long mask)
1713 int tout = 5000; /* wait for 5 secs tops */
1717 if (!(atomic_load_acq_long(&sc->sp_state) & mask)) {
1726 tmp = atomic_load_acq_long(&sc->sp_state);
1728 PMD_DRV_LOG(INFO, "Filtering completion timed out: "
1729 "sp_state 0x%lx, mask 0x%lx", tmp, mask);
1736 static int bnx2x_func_stop(struct bnx2x_softc *sc)
1738 struct ecore_func_state_params func_params = { NULL };
1741 /* prepare parameters for function state transitions */
1742 bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
1743 func_params.f_obj = &sc->func_obj;
1744 func_params.cmd = ECORE_F_CMD_STOP;
1747 * Try to stop the function the 'good way'. If it fails (in case
1748 * of a parity error during bnx2x_chip_cleanup()) and we are
1749 * not in a debug mode, perform a state transaction in order to
1750 * enable further HW_RESET transaction.
1752 rc = ecore_func_state_change(sc, &func_params);
1754 PMD_DRV_LOG(NOTICE, "FUNC_STOP ramrod failed. "
1755 "Running a dry transaction");
1756 bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
1757 return ecore_func_state_change(sc, &func_params);
1763 static int bnx2x_reset_hw(struct bnx2x_softc *sc, uint32_t load_code)
1765 struct ecore_func_state_params func_params = { NULL };
1767 /* Prepare parameters for function state transitions */
1768 bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
1770 func_params.f_obj = &sc->func_obj;
1771 func_params.cmd = ECORE_F_CMD_HW_RESET;
1773 func_params.params.hw_init.load_phase = load_code;
1775 return ecore_func_state_change(sc, &func_params);
1778 static void bnx2x_int_disable_sync(struct bnx2x_softc *sc, int disable_hw)
1781 /* prevent the HW from sending interrupts */
1782 bnx2x_int_disable(sc);
1787 bnx2x_chip_cleanup(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link)
1789 int port = SC_PORT(sc);
1790 struct ecore_mcast_ramrod_params rparam = { NULL };
1791 uint32_t reset_code;
1794 bnx2x_drain_tx_queues(sc);
1796 /* give HW time to discard old tx messages */
1799 /* Clean all ETH MACs */
1800 rc = bnx2x_del_all_macs(sc, &sc->sp_objs[0].mac_obj, ECORE_ETH_MAC,
1803 PMD_DRV_LOG(NOTICE, "Failed to delete all ETH MACs (%d)", rc);
1806 /* Clean up UC list */
1807 rc = bnx2x_del_all_macs(sc, &sc->sp_objs[0].mac_obj, ECORE_UC_LIST_MAC,
1810 PMD_DRV_LOG(NOTICE, "Failed to delete UC MACs list (%d)", rc);
1814 REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 0);
1816 /* Set "drop all" to stop Rx */
1819 * We need to take the if_maddr_lock() here in order to prevent
1820 * a race between the completion code and this code.
1823 if (bnx2x_test_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state)) {
1824 bnx2x_set_bit(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state);
1826 bnx2x_set_storm_rx_mode(sc);
1829 /* Clean up multicast configuration */
1830 rparam.mcast_obj = &sc->mcast_obj;
1831 rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_DEL);
1834 "Failed to send DEL MCAST command (%d)", rc);
1838 * Send the UNLOAD_REQUEST to the MCP. This will return if
1839 * this function should perform FUNCTION, PORT, or COMMON HW
1842 reset_code = bnx2x_send_unload_req(sc, unload_mode);
1845 * (assumption: No Attention from MCP at this stage)
1846 * PMF probably in the middle of TX disable/enable transaction
1848 rc = bnx2x_func_wait_started(sc);
1850 PMD_DRV_LOG(NOTICE, "bnx2x_func_wait_started failed");
1854 * Close multi and leading connections
1855 * Completions for ramrods are collected in a synchronous way
1857 for (i = 0; i < sc->num_queues; i++) {
1858 if (bnx2x_stop_queue(sc, i)) {
1864 * If SP settings didn't get completed so far - something
1865 * very wrong has happen.
1867 if (!bnx2x_wait_sp_comp(sc, ~0x0UL)) {
1868 PMD_DRV_LOG(NOTICE, "Common slow path ramrods got stuck!");
1873 rc = bnx2x_func_stop(sc);
1875 PMD_DRV_LOG(NOTICE, "Function stop failed!");
1878 /* disable HW interrupts */
1879 bnx2x_int_disable_sync(sc, TRUE);
1881 /* Reset the chip */
1882 rc = bnx2x_reset_hw(sc, reset_code);
1884 PMD_DRV_LOG(NOTICE, "Hardware reset failed");
1887 /* Report UNLOAD_DONE to MCP */
1888 bnx2x_send_unload_done(sc, keep_link);
1891 static void bnx2x_disable_close_the_gate(struct bnx2x_softc *sc)
1895 PMD_DRV_LOG(DEBUG, "Disabling 'close the gates'");
1897 val = REG_RD(sc, MISC_REG_AEU_GENERAL_MASK);
1898 val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK |
1899 MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK);
1900 REG_WR(sc, MISC_REG_AEU_GENERAL_MASK, val);
1904 * Cleans the object that have internal lists without sending
1905 * ramrods. Should be run when interrutps are disabled.
1907 static void bnx2x_squeeze_objects(struct bnx2x_softc *sc)
1909 unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
1910 struct ecore_mcast_ramrod_params rparam = { NULL };
1911 struct ecore_vlan_mac_obj *mac_obj = &sc->sp_objs->mac_obj;
1914 /* Cleanup MACs' object first... */
1916 /* Wait for completion of requested */
1917 bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
1918 /* Perform a dry cleanup */
1919 bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &ramrod_flags);
1921 /* Clean ETH primary MAC */
1922 bnx2x_set_bit(ECORE_ETH_MAC, &vlan_mac_flags);
1923 rc = mac_obj->delete_all(sc, &sc->sp_objs->mac_obj, &vlan_mac_flags,
1926 PMD_DRV_LOG(NOTICE, "Failed to clean ETH MACs (%d)", rc);
1929 /* Cleanup UC list */
1931 bnx2x_set_bit(ECORE_UC_LIST_MAC, &vlan_mac_flags);
1932 rc = mac_obj->delete_all(sc, mac_obj, &vlan_mac_flags, &ramrod_flags);
1934 PMD_DRV_LOG(NOTICE, "Failed to clean UC list MACs (%d)", rc);
1937 /* Now clean mcast object... */
1939 rparam.mcast_obj = &sc->mcast_obj;
1940 bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &rparam.ramrod_flags);
1942 /* Add a DEL command... */
1943 rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_DEL);
1946 "Failed to send DEL MCAST command (%d)", rc);
1949 /* now wait until all pending commands are cleared */
1951 rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
1955 "Failed to clean MCAST object (%d)", rc);
1959 rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
1963 /* stop the controller */
1964 __attribute__ ((noinline))
1966 bnx2x_nic_unload(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link)
1968 uint8_t global = FALSE;
1971 PMD_DRV_LOG(DEBUG, "Starting NIC unload...");
1973 /* stop the periodic callout */
1974 bnx2x_periodic_stop(sc);
1976 /* mark driver as unloaded in shmem2 */
1977 if (IS_PF(sc) && SHMEM2_HAS(sc, drv_capabilities_flag)) {
1978 val = SHMEM2_RD(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)]);
1979 SHMEM2_WR(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)],
1980 val & ~DRV_FLAGS_CAPABILITIES_LOADED_L2);
1983 if (IS_PF(sc) && sc->recovery_state != BNX2X_RECOVERY_DONE &&
1984 (sc->state == BNX2X_STATE_CLOSED || sc->state == BNX2X_STATE_ERROR)) {
1986 * We can get here if the driver has been unloaded
1987 * during parity error recovery and is either waiting for a
1988 * leader to complete or for other functions to unload and
1989 * then ifconfig down has been issued. In this case we want to
1990 * unload and let other functions to complete a recovery
1993 sc->recovery_state = BNX2X_RECOVERY_DONE;
1995 bnx2x_release_leader_lock(sc);
1998 PMD_DRV_LOG(NOTICE, "Can't unload in closed or error state");
2003 * Nothing to do during unload if previous bnx2x_nic_load()
2004 * did not completed succesfully - all resourses are released.
2006 if ((sc->state == BNX2X_STATE_CLOSED) || (sc->state == BNX2X_STATE_ERROR)) {
2010 sc->state = BNX2X_STATE_CLOSING_WAITING_HALT;
2013 sc->rx_mode = BNX2X_RX_MODE_NONE;
2014 bnx2x_set_rx_mode(sc);
2018 /* set ALWAYS_ALIVE bit in shmem */
2019 sc->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
2021 bnx2x_drv_pulse(sc);
2023 bnx2x_stats_handle(sc, STATS_EVENT_STOP);
2024 bnx2x_save_statistics(sc);
2027 /* wait till consumers catch up with producers in all queues */
2028 bnx2x_drain_tx_queues(sc);
2030 /* if VF indicate to PF this function is going down (PF will delete sp
2031 * elements and clear initializations
2034 bnx2x_vf_unload(sc);
2035 } else if (unload_mode != UNLOAD_RECOVERY) {
2036 /* if this is a normal/close unload need to clean up chip */
2037 bnx2x_chip_cleanup(sc, unload_mode, keep_link);
2039 /* Send the UNLOAD_REQUEST to the MCP */
2040 bnx2x_send_unload_req(sc, unload_mode);
2043 * Prevent transactions to host from the functions on the
2044 * engine that doesn't reset global blocks in case of global
2045 * attention once gloabl blocks are reset and gates are opened
2046 * (the engine which leader will perform the recovery
2049 if (!CHIP_IS_E1x(sc)) {
2050 bnx2x_pf_disable(sc);
2053 /* disable HW interrupts */
2054 bnx2x_int_disable_sync(sc, TRUE);
2056 /* Report UNLOAD_DONE to MCP */
2057 bnx2x_send_unload_done(sc, FALSE);
2061 * At this stage no more interrupts will arrive so we may safely clean
2062 * the queue'able objects here in case they failed to get cleaned so far.
2065 bnx2x_squeeze_objects(sc);
2068 /* There should be no more pending SP commands at this stage */
2077 bnx2x_free_fw_stats_mem(sc);
2079 sc->state = BNX2X_STATE_CLOSED;
2082 * Check if there are pending parity attentions. If there are - set
2083 * RECOVERY_IN_PROGRESS.
2085 if (IS_PF(sc) && bnx2x_chk_parity_attn(sc, &global, FALSE)) {
2086 bnx2x_set_reset_in_progress(sc);
2088 /* Set RESET_IS_GLOBAL if needed */
2090 bnx2x_set_reset_global(sc);
2095 * The last driver must disable a "close the gate" if there is no
2096 * parity attention or "process kill" pending.
2098 if (IS_PF(sc) && !bnx2x_clear_pf_load(sc) &&
2099 bnx2x_reset_is_done(sc, SC_PATH(sc))) {
2100 bnx2x_disable_close_the_gate(sc);
2103 PMD_DRV_LOG(DEBUG, "Ended NIC unload");
2109 * Encapsulte an mbuf cluster into the tx bd chain and makes the memory
2110 * visible to the controller.
2112 * If an mbuf is submitted to this routine and cannot be given to the
2113 * controller (e.g. it has too many fragments) then the function may free
2114 * the mbuf and return to the caller.
2117 * int: Number of TX BDs used for the mbuf
2119 * Note the side effect that an mbuf may be freed if it causes a problem.
2121 int bnx2x_tx_encap(struct bnx2x_tx_queue *txq, struct rte_mbuf *m0)
2123 struct eth_tx_start_bd *tx_start_bd;
2124 uint16_t bd_prod, pkt_prod;
2125 struct bnx2x_softc *sc;
2129 bd_prod = txq->tx_bd_tail;
2130 pkt_prod = txq->tx_pkt_tail;
2132 txq->sw_ring[TX_BD(pkt_prod, txq)] = m0;
2134 tx_start_bd = &txq->tx_ring[TX_BD(bd_prod, txq)].start_bd;
2137 rte_cpu_to_le_64(rte_mbuf_data_dma_addr(m0));
2138 tx_start_bd->nbytes = rte_cpu_to_le_16(m0->data_len);
2139 tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
2140 tx_start_bd->general_data =
2141 (1 << ETH_TX_START_BD_HDR_NBDS_SHIFT);
2143 tx_start_bd->nbd = rte_cpu_to_le_16(2);
2145 if (m0->ol_flags & PKT_TX_VLAN_PKT) {
2146 tx_start_bd->vlan_or_ethertype =
2147 rte_cpu_to_le_16(m0->vlan_tci);
2148 tx_start_bd->bd_flags.as_bitfield |=
2149 (X_ETH_OUTBAND_VLAN <<
2150 ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT);
2153 tx_start_bd->vlan_or_ethertype =
2154 rte_cpu_to_le_16(pkt_prod);
2156 struct ether_hdr *eh =
2157 rte_pktmbuf_mtod(m0, struct ether_hdr *);
2159 tx_start_bd->vlan_or_ethertype =
2160 rte_cpu_to_le_16(rte_be_to_cpu_16(eh->ether_type));
2164 bd_prod = NEXT_TX_BD(bd_prod);
2166 struct eth_tx_parse_bd_e2 *tx_parse_bd;
2167 const struct ether_hdr *eh =
2168 rte_pktmbuf_mtod(m0, struct ether_hdr *);
2169 uint8_t mac_type = UNICAST_ADDRESS;
2172 &txq->tx_ring[TX_BD(bd_prod, txq)].parse_bd_e2;
2173 if (is_multicast_ether_addr(&eh->d_addr)) {
2174 if (is_broadcast_ether_addr(&eh->d_addr))
2175 mac_type = BROADCAST_ADDRESS;
2177 mac_type = MULTICAST_ADDRESS;
2179 tx_parse_bd->parsing_data =
2180 (mac_type << ETH_TX_PARSE_BD_E2_ETH_ADDR_TYPE_SHIFT);
2182 rte_memcpy(&tx_parse_bd->data.mac_addr.dst_hi,
2183 &eh->d_addr.addr_bytes[0], 2);
2184 rte_memcpy(&tx_parse_bd->data.mac_addr.dst_mid,
2185 &eh->d_addr.addr_bytes[2], 2);
2186 rte_memcpy(&tx_parse_bd->data.mac_addr.dst_lo,
2187 &eh->d_addr.addr_bytes[4], 2);
2188 rte_memcpy(&tx_parse_bd->data.mac_addr.src_hi,
2189 &eh->s_addr.addr_bytes[0], 2);
2190 rte_memcpy(&tx_parse_bd->data.mac_addr.src_mid,
2191 &eh->s_addr.addr_bytes[2], 2);
2192 rte_memcpy(&tx_parse_bd->data.mac_addr.src_lo,
2193 &eh->s_addr.addr_bytes[4], 2);
2195 tx_parse_bd->data.mac_addr.dst_hi =
2196 rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.dst_hi);
2197 tx_parse_bd->data.mac_addr.dst_mid =
2198 rte_cpu_to_be_16(tx_parse_bd->data.
2200 tx_parse_bd->data.mac_addr.dst_lo =
2201 rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.dst_lo);
2202 tx_parse_bd->data.mac_addr.src_hi =
2203 rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.src_hi);
2204 tx_parse_bd->data.mac_addr.src_mid =
2205 rte_cpu_to_be_16(tx_parse_bd->data.
2207 tx_parse_bd->data.mac_addr.src_lo =
2208 rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.src_lo);
2211 "PBD dst %x %x %x src %x %x %x p_data %x",
2212 tx_parse_bd->data.mac_addr.dst_hi,
2213 tx_parse_bd->data.mac_addr.dst_mid,
2214 tx_parse_bd->data.mac_addr.dst_lo,
2215 tx_parse_bd->data.mac_addr.src_hi,
2216 tx_parse_bd->data.mac_addr.src_mid,
2217 tx_parse_bd->data.mac_addr.src_lo,
2218 tx_parse_bd->parsing_data);
2222 "start bd: nbytes %d flags %x vlan %x\n",
2223 tx_start_bd->nbytes,
2224 tx_start_bd->bd_flags.as_bitfield,
2225 tx_start_bd->vlan_or_ethertype);
2227 bd_prod = NEXT_TX_BD(bd_prod);
2230 if (TX_IDX(bd_prod) < 2)
2233 txq->nb_tx_avail -= 2;
2234 txq->tx_bd_tail = bd_prod;
2235 txq->tx_pkt_tail = pkt_prod;
2240 static uint16_t bnx2x_cid_ilt_lines(struct bnx2x_softc *sc)
2242 return L2_ILT_LINES(sc);
2245 static void bnx2x_ilt_set_info(struct bnx2x_softc *sc)
2247 struct ilt_client_info *ilt_client;
2248 struct ecore_ilt *ilt = sc->ilt;
2251 PMD_INIT_FUNC_TRACE();
2253 ilt->start_line = FUNC_ILT_BASE(SC_FUNC(sc));
2256 ilt_client = &ilt->clients[ILT_CLIENT_CDU];
2257 ilt_client->client_num = ILT_CLIENT_CDU;
2258 ilt_client->page_size = CDU_ILT_PAGE_SZ;
2259 ilt_client->flags = ILT_CLIENT_SKIP_MEM;
2260 ilt_client->start = line;
2261 line += bnx2x_cid_ilt_lines(sc);
2263 if (CNIC_SUPPORT(sc)) {
2264 line += CNIC_ILT_LINES;
2267 ilt_client->end = (line - 1);
2270 if (QM_INIT(sc->qm_cid_count)) {
2271 ilt_client = &ilt->clients[ILT_CLIENT_QM];
2272 ilt_client->client_num = ILT_CLIENT_QM;
2273 ilt_client->page_size = QM_ILT_PAGE_SZ;
2274 ilt_client->flags = 0;
2275 ilt_client->start = line;
2277 /* 4 bytes for each cid */
2278 line += DIV_ROUND_UP(sc->qm_cid_count * QM_QUEUES_PER_FUNC * 4,
2281 ilt_client->end = (line - 1);
2284 if (CNIC_SUPPORT(sc)) {
2286 ilt_client = &ilt->clients[ILT_CLIENT_SRC];
2287 ilt_client->client_num = ILT_CLIENT_SRC;
2288 ilt_client->page_size = SRC_ILT_PAGE_SZ;
2289 ilt_client->flags = 0;
2290 ilt_client->start = line;
2291 line += SRC_ILT_LINES;
2292 ilt_client->end = (line - 1);
2295 ilt_client = &ilt->clients[ILT_CLIENT_TM];
2296 ilt_client->client_num = ILT_CLIENT_TM;
2297 ilt_client->page_size = TM_ILT_PAGE_SZ;
2298 ilt_client->flags = 0;
2299 ilt_client->start = line;
2300 line += TM_ILT_LINES;
2301 ilt_client->end = (line - 1);
2304 assert((line <= ILT_MAX_LINES));
2307 static void bnx2x_set_fp_rx_buf_size(struct bnx2x_softc *sc)
2311 for (i = 0; i < sc->num_queues; i++) {
2312 /* get the Rx buffer size for RX frames */
2313 sc->fp[i].rx_buf_size =
2314 (IP_HEADER_ALIGNMENT_PADDING + ETH_OVERHEAD + sc->mtu);
2318 int bnx2x_alloc_ilt_mem(struct bnx2x_softc *sc)
2321 sc->ilt = rte_malloc("", sizeof(struct ecore_ilt), RTE_CACHE_LINE_SIZE);
2323 return sc->ilt == NULL;
2326 static int bnx2x_alloc_ilt_lines_mem(struct bnx2x_softc *sc)
2328 sc->ilt->lines = rte_calloc("",
2329 sizeof(struct ilt_line), ILT_MAX_LINES,
2330 RTE_CACHE_LINE_SIZE);
2331 return sc->ilt->lines == NULL;
2334 void bnx2x_free_ilt_mem(struct bnx2x_softc *sc)
2340 static void bnx2x_free_ilt_lines_mem(struct bnx2x_softc *sc)
2342 if (sc->ilt->lines != NULL) {
2343 rte_free(sc->ilt->lines);
2344 sc->ilt->lines = NULL;
2348 static void bnx2x_free_mem(struct bnx2x_softc *sc)
2352 for (i = 0; i < L2_ILT_LINES(sc); i++) {
2353 sc->context[i].vcxt = NULL;
2354 sc->context[i].size = 0;
2357 ecore_ilt_mem_op(sc, ILT_MEMOP_FREE);
2359 bnx2x_free_ilt_lines_mem(sc);
2362 static int bnx2x_alloc_mem(struct bnx2x_softc *sc)
2367 char cdu_name[RTE_MEMZONE_NAMESIZE];
2370 * Allocate memory for CDU context:
2371 * This memory is allocated separately and not in the generic ILT
2372 * functions because CDU differs in few aspects:
2373 * 1. There can be multiple entities allocating memory for context -
2374 * regular L2, CNIC, and SRIOV drivers. Each separately controls
2375 * its own ILT lines.
2376 * 2. Since CDU page-size is not a single 4KB page (which is the case
2377 * for the other ILT clients), to be efficient we want to support
2378 * allocation of sub-page-size in the last entry.
2379 * 3. Context pointers are used by the driver to pass to FW / update
2380 * the context (for the other ILT clients the pointers are used just to
2381 * free the memory during unload).
2383 context_size = (sizeof(union cdu_context) * BNX2X_L2_CID_COUNT(sc));
2384 for (i = 0, allocated = 0; allocated < context_size; i++) {
2385 sc->context[i].size = min(CDU_ILT_PAGE_SZ,
2386 (context_size - allocated));
2388 snprintf(cdu_name, sizeof(cdu_name), "cdu_%d", i);
2389 if (bnx2x_dma_alloc(sc, sc->context[i].size,
2390 &sc->context[i].vcxt_dma,
2391 cdu_name, BNX2X_PAGE_SIZE) != 0) {
2396 sc->context[i].vcxt =
2397 (union cdu_context *)sc->context[i].vcxt_dma.vaddr;
2399 allocated += sc->context[i].size;
2402 bnx2x_alloc_ilt_lines_mem(sc);
2404 if (ecore_ilt_mem_op(sc, ILT_MEMOP_ALLOC)) {
2405 PMD_DRV_LOG(NOTICE, "ecore_ilt_mem_op ILT_MEMOP_ALLOC failed");
2413 static void bnx2x_free_fw_stats_mem(struct bnx2x_softc *sc)
2415 sc->fw_stats_num = 0;
2417 sc->fw_stats_req_size = 0;
2418 sc->fw_stats_req = NULL;
2419 sc->fw_stats_req_mapping = 0;
2421 sc->fw_stats_data_size = 0;
2422 sc->fw_stats_data = NULL;
2423 sc->fw_stats_data_mapping = 0;
2426 static int bnx2x_alloc_fw_stats_mem(struct bnx2x_softc *sc)
2428 uint8_t num_queue_stats;
2429 int num_groups, vf_headroom = 0;
2431 /* number of queues for statistics is number of eth queues */
2432 num_queue_stats = BNX2X_NUM_ETH_QUEUES(sc);
2435 * Total number of FW statistics requests =
2436 * 1 for port stats + 1 for PF stats + num of queues
2438 sc->fw_stats_num = (2 + num_queue_stats);
2441 * Request is built from stats_query_header and an array of
2442 * stats_query_cmd_group each of which contains STATS_QUERY_CMD_COUNT
2443 * rules. The real number or requests is configured in the
2444 * stats_query_header.
2446 num_groups = (sc->fw_stats_num + vf_headroom) / STATS_QUERY_CMD_COUNT;
2447 if ((sc->fw_stats_num + vf_headroom) % STATS_QUERY_CMD_COUNT)
2450 sc->fw_stats_req_size =
2451 (sizeof(struct stats_query_header) +
2452 (num_groups * sizeof(struct stats_query_cmd_group)));
2455 * Data for statistics requests + stats_counter.
2456 * stats_counter holds per-STORM counters that are incremented when
2457 * STORM has finished with the current request. Memory for FCoE
2458 * offloaded statistics are counted anyway, even if they will not be sent.
2459 * VF stats are not accounted for here as the data of VF stats is stored
2460 * in memory allocated by the VF, not here.
2462 sc->fw_stats_data_size =
2463 (sizeof(struct stats_counter) +
2464 sizeof(struct per_port_stats) + sizeof(struct per_pf_stats) +
2465 /* sizeof(struct fcoe_statistics_params) + */
2466 (sizeof(struct per_queue_stats) * num_queue_stats));
2468 if (bnx2x_dma_alloc(sc, (sc->fw_stats_req_size + sc->fw_stats_data_size),
2469 &sc->fw_stats_dma, "fw_stats",
2470 RTE_CACHE_LINE_SIZE) != 0) {
2471 bnx2x_free_fw_stats_mem(sc);
2475 /* set up the shortcuts */
2477 sc->fw_stats_req = (struct bnx2x_fw_stats_req *)sc->fw_stats_dma.vaddr;
2478 sc->fw_stats_req_mapping = sc->fw_stats_dma.paddr;
2481 (struct bnx2x_fw_stats_data *)((uint8_t *) sc->fw_stats_dma.vaddr +
2482 sc->fw_stats_req_size);
2483 sc->fw_stats_data_mapping = (sc->fw_stats_dma.paddr +
2484 sc->fw_stats_req_size);
2491 * 0-7 - Engine0 load counter.
2492 * 8-15 - Engine1 load counter.
2493 * 16 - Engine0 RESET_IN_PROGRESS bit.
2494 * 17 - Engine1 RESET_IN_PROGRESS bit.
2495 * 18 - Engine0 ONE_IS_LOADED. Set when there is at least one active
2496 * function on the engine
2497 * 19 - Engine1 ONE_IS_LOADED.
2498 * 20 - Chip reset flow bit. When set none-leader must wait for both engines
2499 * leader to complete (check for both RESET_IN_PROGRESS bits and not
2500 * for just the one belonging to its engine).
2502 #define BNX2X_RECOVERY_GLOB_REG MISC_REG_GENERIC_POR_1
2503 #define BNX2X_PATH0_LOAD_CNT_MASK 0x000000ff
2504 #define BNX2X_PATH0_LOAD_CNT_SHIFT 0
2505 #define BNX2X_PATH1_LOAD_CNT_MASK 0x0000ff00
2506 #define BNX2X_PATH1_LOAD_CNT_SHIFT 8
2507 #define BNX2X_PATH0_RST_IN_PROG_BIT 0x00010000
2508 #define BNX2X_PATH1_RST_IN_PROG_BIT 0x00020000
2509 #define BNX2X_GLOBAL_RESET_BIT 0x00040000
2511 /* set the GLOBAL_RESET bit, should be run under rtnl lock */
2512 static void bnx2x_set_reset_global(struct bnx2x_softc *sc)
2515 bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
2516 val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
2517 REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val | BNX2X_GLOBAL_RESET_BIT);
2518 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
2521 /* clear the GLOBAL_RESET bit, should be run under rtnl lock */
2522 static void bnx2x_clear_reset_global(struct bnx2x_softc *sc)
2525 bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
2526 val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
2527 REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val & (~BNX2X_GLOBAL_RESET_BIT));
2528 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
2531 /* checks the GLOBAL_RESET bit, should be run under rtnl lock */
2532 static uint8_t bnx2x_reset_is_global(struct bnx2x_softc *sc)
2534 return REG_RD(sc, BNX2X_RECOVERY_GLOB_REG) & BNX2X_GLOBAL_RESET_BIT;
2537 /* clear RESET_IN_PROGRESS bit for the engine, should be run under rtnl lock */
2538 static void bnx2x_set_reset_done(struct bnx2x_softc *sc)
2541 uint32_t bit = SC_PATH(sc) ? BNX2X_PATH1_RST_IN_PROG_BIT :
2542 BNX2X_PATH0_RST_IN_PROG_BIT;
2544 bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
2546 val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
2549 REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
2551 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
2554 /* set RESET_IN_PROGRESS for the engine, should be run under rtnl lock */
2555 static void bnx2x_set_reset_in_progress(struct bnx2x_softc *sc)
2558 uint32_t bit = SC_PATH(sc) ? BNX2X_PATH1_RST_IN_PROG_BIT :
2559 BNX2X_PATH0_RST_IN_PROG_BIT;
2561 bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
2563 val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
2566 REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
2568 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
2571 /* check RESET_IN_PROGRESS bit for an engine, should be run under rtnl lock */
2572 static uint8_t bnx2x_reset_is_done(struct bnx2x_softc *sc, int engine)
2574 uint32_t val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
2575 uint32_t bit = engine ? BNX2X_PATH1_RST_IN_PROG_BIT :
2576 BNX2X_PATH0_RST_IN_PROG_BIT;
2578 /* return false if bit is set */
2579 return (val & bit) ? FALSE : TRUE;
2582 /* get the load status for an engine, should be run under rtnl lock */
2583 static uint8_t bnx2x_get_load_status(struct bnx2x_softc *sc, int engine)
2585 uint32_t mask = engine ? BNX2X_PATH1_LOAD_CNT_MASK :
2586 BNX2X_PATH0_LOAD_CNT_MASK;
2587 uint32_t shift = engine ? BNX2X_PATH1_LOAD_CNT_SHIFT :
2588 BNX2X_PATH0_LOAD_CNT_SHIFT;
2589 uint32_t val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
2591 val = ((val & mask) >> shift);
2596 /* set pf load mark */
2597 static void bnx2x_set_pf_load(struct bnx2x_softc *sc)
2601 uint32_t mask = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_MASK :
2602 BNX2X_PATH0_LOAD_CNT_MASK;
2603 uint32_t shift = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
2604 BNX2X_PATH0_LOAD_CNT_SHIFT;
2606 bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
2608 PMD_INIT_FUNC_TRACE();
2610 val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
2612 /* get the current counter value */
2613 val1 = ((val & mask) >> shift);
2615 /* set bit of this PF */
2616 val1 |= (1 << SC_ABS_FUNC(sc));
2618 /* clear the old value */
2621 /* set the new one */
2622 val |= ((val1 << shift) & mask);
2624 REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
2626 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
2629 /* clear pf load mark */
2630 static uint8_t bnx2x_clear_pf_load(struct bnx2x_softc *sc)
2633 uint32_t mask = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_MASK :
2634 BNX2X_PATH0_LOAD_CNT_MASK;
2635 uint32_t shift = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
2636 BNX2X_PATH0_LOAD_CNT_SHIFT;
2638 bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
2639 val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
2641 /* get the current counter value */
2642 val1 = (val & mask) >> shift;
2644 /* clear bit of that PF */
2645 val1 &= ~(1 << SC_ABS_FUNC(sc));
2647 /* clear the old value */
2650 /* set the new one */
2651 val |= ((val1 << shift) & mask);
2653 REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
2654 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
2658 /* send load requrest to mcp and analyze response */
2659 static int bnx2x_nic_load_request(struct bnx2x_softc *sc, uint32_t * load_code)
2661 PMD_INIT_FUNC_TRACE();
2665 (SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_mb_header) &
2666 DRV_MSG_SEQ_NUMBER_MASK);
2668 PMD_DRV_LOG(DEBUG, "initial fw_seq 0x%04x", sc->fw_seq);
2671 /* get the current FW pulse sequence */
2672 sc->fw_drv_pulse_wr_seq =
2673 (SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_pulse_mb) &
2674 DRV_PULSE_SEQ_MASK);
2676 /* set ALWAYS_ALIVE bit in shmem */
2677 sc->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
2678 bnx2x_drv_pulse(sc);
2682 (*load_code) = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_REQ,
2683 DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
2685 /* if the MCP fails to respond we must abort */
2686 if (!(*load_code)) {
2687 PMD_DRV_LOG(NOTICE, "MCP response failure!");
2691 /* if MCP refused then must abort */
2692 if ((*load_code) == FW_MSG_CODE_DRV_LOAD_REFUSED) {
2693 PMD_DRV_LOG(NOTICE, "MCP refused load request");
2701 * Check whether another PF has already loaded FW to chip. In virtualized
2702 * environments a pf from anoth VM may have already initialized the device
2703 * including loading FW.
2705 static int bnx2x_nic_load_analyze_req(struct bnx2x_softc *sc, uint32_t load_code)
2707 uint32_t my_fw, loaded_fw;
2709 /* is another pf loaded on this engine? */
2710 if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) &&
2711 (load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) {
2712 /* build my FW version dword */
2713 my_fw = (BNX2X_5710_FW_MAJOR_VERSION +
2714 (BNX2X_5710_FW_MINOR_VERSION << 8) +
2715 (BNX2X_5710_FW_REVISION_VERSION << 16) +
2716 (BNX2X_5710_FW_ENGINEERING_VERSION << 24));
2718 /* read loaded FW from chip */
2719 loaded_fw = REG_RD(sc, XSEM_REG_PRAM);
2720 PMD_DRV_LOG(DEBUG, "loaded FW 0x%08x / my FW 0x%08x",
2723 /* abort nic load if version mismatch */
2724 if (my_fw != loaded_fw) {
2726 "FW 0x%08x already loaded (mine is 0x%08x)",
2735 /* mark PMF if applicable */
2736 static void bnx2x_nic_load_pmf(struct bnx2x_softc *sc, uint32_t load_code)
2738 uint32_t ncsi_oem_data_addr;
2740 PMD_INIT_FUNC_TRACE();
2742 if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
2743 (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) ||
2744 (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) {
2746 * Barrier here for ordering between the writing to sc->port.pmf here
2747 * and reading it from the periodic task.
2755 PMD_DRV_LOG(DEBUG, "pmf %d", sc->port.pmf);
2757 if (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) {
2758 if (SHMEM2_HAS(sc, ncsi_oem_data_addr)) {
2759 ncsi_oem_data_addr = SHMEM2_RD(sc, ncsi_oem_data_addr);
2760 if (ncsi_oem_data_addr) {
2762 (ncsi_oem_data_addr +
2763 offsetof(struct glob_ncsi_oem_data,
2764 driver_version)), 0);
2770 static void bnx2x_read_mf_cfg(struct bnx2x_softc *sc)
2772 int n = (CHIP_IS_MODE_4_PORT(sc) ? 2 : 1);
2776 if (BNX2X_NOMCP(sc)) {
2777 return; /* what should be the default bvalue in this case */
2781 * The formula for computing the absolute function number is...
2782 * For 2 port configuration (4 functions per port):
2783 * abs_func = 2 * vn + SC_PORT + SC_PATH
2784 * For 4 port configuration (2 functions per port):
2785 * abs_func = 4 * vn + 2 * SC_PORT + SC_PATH
2787 for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
2788 abs_func = (n * (2 * vn + SC_PORT(sc)) + SC_PATH(sc));
2789 if (abs_func >= E1H_FUNC_MAX) {
2792 sc->devinfo.mf_info.mf_config[vn] =
2793 MFCFG_RD(sc, func_mf_config[abs_func].config);
2796 if (sc->devinfo.mf_info.mf_config[SC_VN(sc)] &
2797 FUNC_MF_CFG_FUNC_DISABLED) {
2798 PMD_DRV_LOG(DEBUG, "mf_cfg function disabled");
2799 sc->flags |= BNX2X_MF_FUNC_DIS;
2801 PMD_DRV_LOG(DEBUG, "mf_cfg function enabled");
2802 sc->flags &= ~BNX2X_MF_FUNC_DIS;
2806 /* acquire split MCP access lock register */
2807 static int bnx2x_acquire_alr(struct bnx2x_softc *sc)
2811 for (j = 0; j < 1000; j++) {
2813 REG_WR(sc, GRCBASE_MCP + 0x9c, val);
2814 val = REG_RD(sc, GRCBASE_MCP + 0x9c);
2815 if (val & (1L << 31))
2821 if (!(val & (1L << 31))) {
2822 PMD_DRV_LOG(NOTICE, "Cannot acquire MCP access lock register");
2829 /* release split MCP access lock register */
2830 static void bnx2x_release_alr(struct bnx2x_softc *sc)
2832 REG_WR(sc, GRCBASE_MCP + 0x9c, 0);
2835 static void bnx2x_fan_failure(struct bnx2x_softc *sc)
2837 int port = SC_PORT(sc);
2838 uint32_t ext_phy_config;
2840 /* mark the failure */
2842 SHMEM_RD(sc, dev_info.port_hw_config[port].external_phy_config);
2844 ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
2845 ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
2846 SHMEM_WR(sc, dev_info.port_hw_config[port].external_phy_config,
2849 /* log the failure */
2851 "Fan Failure has caused the driver to shutdown "
2852 "the card to prevent permanent damage. "
2853 "Please contact OEM Support for assistance");
2855 rte_panic("Schedule task to handle fan failure");
2858 /* this function is called upon a link interrupt */
2859 static void bnx2x_link_attn(struct bnx2x_softc *sc)
2861 uint32_t pause_enabled = 0;
2862 struct host_port_stats *pstats;
2865 /* Make sure that we are synced with the current statistics */
2866 bnx2x_stats_handle(sc, STATS_EVENT_STOP);
2868 elink_link_update(&sc->link_params, &sc->link_vars);
2870 if (sc->link_vars.link_up) {
2872 /* dropless flow control */
2873 if (sc->dropless_fc) {
2876 if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_TX) {
2881 (BAR_USTRORM_INTMEM +
2882 USTORM_ETH_PAUSE_ENABLED_OFFSET(SC_PORT(sc))),
2886 if (sc->link_vars.mac_type != ELINK_MAC_TYPE_EMAC) {
2887 pstats = BNX2X_SP(sc, port_stats);
2888 /* reset old mac stats */
2889 memset(&(pstats->mac_stx[0]), 0,
2890 sizeof(struct mac_stx));
2893 if (sc->state == BNX2X_STATE_OPEN) {
2894 bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
2898 if (sc->link_vars.link_up && sc->link_vars.line_speed) {
2899 cmng_fns = bnx2x_get_cmng_fns_mode(sc);
2901 if (cmng_fns != CMNG_FNS_NONE) {
2902 bnx2x_cmng_fns_init(sc, FALSE, cmng_fns);
2903 storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
2907 bnx2x_link_report(sc);
2910 bnx2x_link_sync_notify(sc);
2914 static void bnx2x_attn_int_asserted(struct bnx2x_softc *sc, uint32_t asserted)
2916 int port = SC_PORT(sc);
2917 uint32_t aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
2918 MISC_REG_AEU_MASK_ATTN_FUNC_0;
2919 uint32_t nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
2920 NIG_REG_MASK_INTERRUPT_PORT0;
2922 uint32_t nig_mask = 0;
2927 if (sc->attn_state & asserted) {
2928 PMD_DRV_LOG(ERR, "IGU ERROR attn=0x%08x", asserted);
2931 bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
2933 aeu_mask = REG_RD(sc, aeu_addr);
2935 aeu_mask &= ~(asserted & 0x3ff);
2937 REG_WR(sc, aeu_addr, aeu_mask);
2939 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
2941 sc->attn_state |= asserted;
2943 if (asserted & ATTN_HARD_WIRED_MASK) {
2944 if (asserted & ATTN_NIG_FOR_FUNC) {
2946 /* save nig interrupt mask */
2947 nig_mask = REG_RD(sc, nig_int_mask_addr);
2949 /* If nig_mask is not set, no need to call the update function */
2951 REG_WR(sc, nig_int_mask_addr, 0);
2953 bnx2x_link_attn(sc);
2956 /* handle unicore attn? */
2959 if (asserted & ATTN_SW_TIMER_4_FUNC) {
2960 PMD_DRV_LOG(DEBUG, "ATTN_SW_TIMER_4_FUNC!");
2963 if (asserted & GPIO_2_FUNC) {
2964 PMD_DRV_LOG(DEBUG, "GPIO_2_FUNC!");
2967 if (asserted & GPIO_3_FUNC) {
2968 PMD_DRV_LOG(DEBUG, "GPIO_3_FUNC!");
2971 if (asserted & GPIO_4_FUNC) {
2972 PMD_DRV_LOG(DEBUG, "GPIO_4_FUNC!");
2976 if (asserted & ATTN_GENERAL_ATTN_1) {
2977 PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_1!");
2978 REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_1, 0x0);
2980 if (asserted & ATTN_GENERAL_ATTN_2) {
2981 PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_2!");
2982 REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_2, 0x0);
2984 if (asserted & ATTN_GENERAL_ATTN_3) {
2985 PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_3!");
2986 REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_3, 0x0);
2989 if (asserted & ATTN_GENERAL_ATTN_4) {
2990 PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_4!");
2991 REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_4, 0x0);
2993 if (asserted & ATTN_GENERAL_ATTN_5) {
2994 PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_5!");
2995 REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_5, 0x0);
2997 if (asserted & ATTN_GENERAL_ATTN_6) {
2998 PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_6!");
2999 REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_6, 0x0);
3004 if (sc->devinfo.int_block == INT_BLOCK_HC) {
3006 (HC_REG_COMMAND_REG + port * 32 +
3007 COMMAND_REG_ATTN_BITS_SET);
3009 reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_SET_UPPER * 8);
3012 PMD_DRV_LOG(DEBUG, "about to mask 0x%08x at %s addr 0x%08x",
3014 (sc->devinfo.int_block == INT_BLOCK_HC) ? "HC" : "IGU",
3016 REG_WR(sc, reg_addr, asserted);
3018 /* now set back the mask */
3019 if (asserted & ATTN_NIG_FOR_FUNC) {
3021 * Verify that IGU ack through BAR was written before restoring
3022 * NIG mask. This loop should exit after 2-3 iterations max.
3024 if (sc->devinfo.int_block != INT_BLOCK_HC) {
3029 REG_RD(sc, IGU_REG_ATTENTION_ACK_BITS);
3030 } while (((igu_acked & ATTN_NIG_FOR_FUNC) == 0)
3031 && (++cnt < MAX_IGU_ATTN_ACK_TO));
3035 "Failed to verify IGU ack on time");
3041 REG_WR(sc, nig_int_mask_addr, nig_mask);
3047 bnx2x_print_next_block(__rte_unused struct bnx2x_softc *sc, __rte_unused int idx,
3048 __rte_unused const char *blk)
3050 PMD_DRV_LOG(INFO, "%s%s", idx ? ", " : "", blk);
3054 bnx2x_check_blocks_with_parity0(struct bnx2x_softc *sc, uint32_t sig, int par_num,
3057 uint32_t cur_bit = 0;
3060 for (i = 0; sig; i++) {
3061 cur_bit = ((uint32_t) 0x1 << i);
3062 if (sig & cur_bit) {
3064 case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR:
3066 bnx2x_print_next_block(sc, par_num++,
3069 case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR:
3071 bnx2x_print_next_block(sc, par_num++,
3074 case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR:
3076 bnx2x_print_next_block(sc, par_num++,
3079 case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR:
3081 bnx2x_print_next_block(sc, par_num++,
3084 case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR:
3086 bnx2x_print_next_block(sc, par_num++,
3089 case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR:
3091 bnx2x_print_next_block(sc, par_num++,
3094 case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR:
3096 bnx2x_print_next_block(sc, par_num++,
3110 bnx2x_check_blocks_with_parity1(struct bnx2x_softc *sc, uint32_t sig, int par_num,
3111 uint8_t * global, uint8_t print)
3114 uint32_t cur_bit = 0;
3115 for (i = 0; sig; i++) {
3116 cur_bit = ((uint32_t) 0x1 << i);
3117 if (sig & cur_bit) {
3119 case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR:
3121 bnx2x_print_next_block(sc, par_num++,
3124 case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR:
3126 bnx2x_print_next_block(sc, par_num++,
3129 case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR:
3131 bnx2x_print_next_block(sc, par_num++,
3134 case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR:
3136 bnx2x_print_next_block(sc, par_num++,
3139 case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR:
3141 bnx2x_print_next_block(sc, par_num++,
3144 case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR:
3146 bnx2x_print_next_block(sc, par_num++,
3149 case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR:
3151 bnx2x_print_next_block(sc, par_num++,
3154 case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR:
3156 bnx2x_print_next_block(sc, par_num++,
3159 case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR:
3161 bnx2x_print_next_block(sc, par_num++,
3165 case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR:
3167 bnx2x_print_next_block(sc, par_num++,
3170 case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR:
3172 bnx2x_print_next_block(sc, par_num++,
3175 case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR:
3177 bnx2x_print_next_block(sc, par_num++,
3180 case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR:
3182 bnx2x_print_next_block(sc, par_num++,
3185 case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR:
3187 bnx2x_print_next_block(sc, par_num++,
3190 case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR:
3192 bnx2x_print_next_block(sc, par_num++,
3195 case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR:
3197 bnx2x_print_next_block(sc, par_num++,
3211 bnx2x_check_blocks_with_parity2(struct bnx2x_softc *sc, uint32_t sig, int par_num,
3214 uint32_t cur_bit = 0;
3217 for (i = 0; sig; i++) {
3218 cur_bit = ((uint32_t) 0x1 << i);
3219 if (sig & cur_bit) {
3221 case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR:
3223 bnx2x_print_next_block(sc, par_num++,
3226 case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR:
3228 bnx2x_print_next_block(sc, par_num++,
3231 case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR:
3233 bnx2x_print_next_block(sc, par_num++,
3234 "PXPPCICLOCKCLIENT");
3236 case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR:
3238 bnx2x_print_next_block(sc, par_num++,
3241 case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR:
3243 bnx2x_print_next_block(sc, par_num++,
3246 case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR:
3248 bnx2x_print_next_block(sc, par_num++,
3251 case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR:
3253 bnx2x_print_next_block(sc, par_num++,
3256 case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR:
3258 bnx2x_print_next_block(sc, par_num++,
3272 bnx2x_check_blocks_with_parity3(struct bnx2x_softc *sc, uint32_t sig, int par_num,
3273 uint8_t * global, uint8_t print)
3275 uint32_t cur_bit = 0;
3278 for (i = 0; sig; i++) {
3279 cur_bit = ((uint32_t) 0x1 << i);
3280 if (sig & cur_bit) {
3282 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY:
3284 bnx2x_print_next_block(sc, par_num++,
3288 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY:
3290 bnx2x_print_next_block(sc, par_num++,
3294 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY:
3296 bnx2x_print_next_block(sc, par_num++,
3300 case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY:
3302 bnx2x_print_next_block(sc, par_num++,
3317 bnx2x_check_blocks_with_parity4(struct bnx2x_softc *sc, uint32_t sig, int par_num,
3320 uint32_t cur_bit = 0;
3323 for (i = 0; sig; i++) {
3324 cur_bit = ((uint32_t) 0x1 << i);
3325 if (sig & cur_bit) {
3327 case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR:
3329 bnx2x_print_next_block(sc, par_num++,
3332 case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR:
3334 bnx2x_print_next_block(sc, par_num++,
3348 bnx2x_parity_attn(struct bnx2x_softc *sc, uint8_t * global, uint8_t print,
3353 if ((sig[0] & HW_PRTY_ASSERT_SET_0) ||
3354 (sig[1] & HW_PRTY_ASSERT_SET_1) ||
3355 (sig[2] & HW_PRTY_ASSERT_SET_2) ||
3356 (sig[3] & HW_PRTY_ASSERT_SET_3) ||
3357 (sig[4] & HW_PRTY_ASSERT_SET_4)) {
3359 "Parity error: HW block parity attention:"
3360 "[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x [4]:0x%08x",
3361 (uint32_t) (sig[0] & HW_PRTY_ASSERT_SET_0),
3362 (uint32_t) (sig[1] & HW_PRTY_ASSERT_SET_1),
3363 (uint32_t) (sig[2] & HW_PRTY_ASSERT_SET_2),
3364 (uint32_t) (sig[3] & HW_PRTY_ASSERT_SET_3),
3365 (uint32_t) (sig[4] & HW_PRTY_ASSERT_SET_4));
3368 PMD_DRV_LOG(INFO, "Parity errors detected in blocks: ");
3371 bnx2x_check_blocks_with_parity0(sc, sig[0] &
3372 HW_PRTY_ASSERT_SET_0,
3375 bnx2x_check_blocks_with_parity1(sc, sig[1] &
3376 HW_PRTY_ASSERT_SET_1,
3377 par_num, global, print);
3379 bnx2x_check_blocks_with_parity2(sc, sig[2] &
3380 HW_PRTY_ASSERT_SET_2,
3383 bnx2x_check_blocks_with_parity3(sc, sig[3] &
3384 HW_PRTY_ASSERT_SET_3,
3385 par_num, global, print);
3387 bnx2x_check_blocks_with_parity4(sc, sig[4] &
3388 HW_PRTY_ASSERT_SET_4,
3392 PMD_DRV_LOG(INFO, "");
3401 bnx2x_chk_parity_attn(struct bnx2x_softc *sc, uint8_t * global, uint8_t print)
3403 struct attn_route attn = { {0} };
3404 int port = SC_PORT(sc);
3406 attn.sig[0] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port * 4);
3407 attn.sig[1] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port * 4);
3408 attn.sig[2] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port * 4);
3409 attn.sig[3] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port * 4);
3411 if (!CHIP_IS_E1x(sc))
3413 REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port * 4);
3415 return bnx2x_parity_attn(sc, global, print, attn.sig);
3418 static void bnx2x_attn_int_deasserted4(struct bnx2x_softc *sc, uint32_t attn)
3422 if (attn & AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT) {
3423 val = REG_RD(sc, PGLUE_B_REG_PGLUE_B_INT_STS_CLR);
3424 PMD_DRV_LOG(INFO, "ERROR: PGLUE hw attention 0x%08x", val);
3425 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR)
3427 "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR");
3428 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR)
3430 "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR");
3431 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN)
3433 "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN");
3434 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN)
3436 "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN");
3438 PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN)
3440 "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN");
3442 PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN)
3444 "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN");
3445 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN)
3447 "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN");
3448 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN)
3450 "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN");
3451 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW)
3453 "ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW");
3456 if (attn & AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT) {
3457 val = REG_RD(sc, ATC_REG_ATC_INT_STS_CLR);
3458 PMD_DRV_LOG(INFO, "ERROR: ATC hw attention 0x%08x", val);
3459 if (val & ATC_ATC_INT_STS_REG_ADDRESS_ERROR)
3461 "ERROR: ATC_ATC_INT_STS_REG_ADDRESS_ERROR");
3462 if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND)
3464 "ERROR: ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND");
3465 if (val & ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS)
3467 "ERROR: ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS");
3468 if (val & ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT)
3470 "ERROR: ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT");
3471 if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR)
3473 "ERROR: ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR");
3474 if (val & ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU)
3476 "ERROR: ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU");
3479 if (attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |
3480 AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)) {
3482 "ERROR: FATAL parity attention set4 0x%08x",
3484 (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR
3486 AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)));
3490 static void bnx2x_e1h_disable(struct bnx2x_softc *sc)
3492 int port = SC_PORT(sc);
3494 REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 0);
3497 static void bnx2x_e1h_enable(struct bnx2x_softc *sc)
3499 int port = SC_PORT(sc);
3501 REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
3505 * called due to MCP event (on pmf):
3506 * reread new bandwidth configuration
3508 * notify others function about the change
3510 static void bnx2x_config_mf_bw(struct bnx2x_softc *sc)
3512 if (sc->link_vars.link_up) {
3513 bnx2x_cmng_fns_init(sc, TRUE, CMNG_FNS_MINMAX);
3514 bnx2x_link_sync_notify(sc);
3517 storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
3520 static void bnx2x_set_mf_bw(struct bnx2x_softc *sc)
3522 bnx2x_config_mf_bw(sc);
3523 bnx2x_fw_command(sc, DRV_MSG_CODE_SET_MF_BW_ACK, 0);
3526 static void bnx2x_handle_eee_event(struct bnx2x_softc *sc)
3528 bnx2x_fw_command(sc, DRV_MSG_CODE_EEE_RESULTS_ACK, 0);
3531 #define DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED 3
3533 static void bnx2x_drv_info_ether_stat(struct bnx2x_softc *sc)
3535 struct eth_stats_info *ether_stat = &sc->sp->drv_info_to_mcp.ether_stat;
3537 strncpy(ether_stat->version, BNX2X_DRIVER_VERSION,
3538 ETH_STAT_INFO_VERSION_LEN);
3540 sc->sp_objs[0].mac_obj.get_n_elements(sc, &sc->sp_objs[0].mac_obj,
3541 DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED,
3542 ether_stat->mac_local + MAC_PAD,
3545 ether_stat->mtu_size = sc->mtu;
3547 ether_stat->feature_flags |= FEATURE_ETH_CHKSUM_OFFLOAD_MASK;
3548 ether_stat->promiscuous_mode = 0; // (flags & PROMISC) ? 1 : 0;
3550 ether_stat->txq_size = sc->tx_ring_size;
3551 ether_stat->rxq_size = sc->rx_ring_size;
3554 static void bnx2x_handle_drv_info_req(struct bnx2x_softc *sc)
3556 enum drv_info_opcode op_code;
3557 uint32_t drv_info_ctl = SHMEM2_RD(sc, drv_info_control);
3559 /* if drv_info version supported by MFW doesn't match - send NACK */
3560 if ((drv_info_ctl & DRV_INFO_CONTROL_VER_MASK) != DRV_INFO_CUR_VER) {
3561 bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_NACK, 0);
3565 op_code = ((drv_info_ctl & DRV_INFO_CONTROL_OP_CODE_MASK) >>
3566 DRV_INFO_CONTROL_OP_CODE_SHIFT);
3568 memset(&sc->sp->drv_info_to_mcp, 0, sizeof(union drv_info_to_mcp));
3571 case ETH_STATS_OPCODE:
3572 bnx2x_drv_info_ether_stat(sc);
3574 case FCOE_STATS_OPCODE:
3575 case ISCSI_STATS_OPCODE:
3577 /* if op code isn't supported - send NACK */
3578 bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_NACK, 0);
3583 * If we got drv_info attn from MFW then these fields are defined in
3586 SHMEM2_WR(sc, drv_info_host_addr_lo,
3587 U64_LO(BNX2X_SP_MAPPING(sc, drv_info_to_mcp)));
3588 SHMEM2_WR(sc, drv_info_host_addr_hi,
3589 U64_HI(BNX2X_SP_MAPPING(sc, drv_info_to_mcp)));
3591 bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_ACK, 0);
3594 static void bnx2x_dcc_event(struct bnx2x_softc *sc, uint32_t dcc_event)
3596 if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) {
3598 * This is the only place besides the function initialization
3599 * where the sc->flags can change so it is done without any
3603 mf_info.mf_config[SC_VN(sc)] & FUNC_MF_CFG_FUNC_DISABLED) {
3604 PMD_DRV_LOG(DEBUG, "mf_cfg function disabled");
3605 sc->flags |= BNX2X_MF_FUNC_DIS;
3606 bnx2x_e1h_disable(sc);
3608 PMD_DRV_LOG(DEBUG, "mf_cfg function enabled");
3609 sc->flags &= ~BNX2X_MF_FUNC_DIS;
3610 bnx2x_e1h_enable(sc);
3612 dcc_event &= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF;
3615 if (dcc_event & DRV_STATUS_DCC_BANDWIDTH_ALLOCATION) {
3616 bnx2x_config_mf_bw(sc);
3617 dcc_event &= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION;
3620 /* Report results to MCP */
3622 bnx2x_fw_command(sc, DRV_MSG_CODE_DCC_FAILURE, 0);
3624 bnx2x_fw_command(sc, DRV_MSG_CODE_DCC_OK, 0);
3627 static void bnx2x_pmf_update(struct bnx2x_softc *sc)
3629 int port = SC_PORT(sc);
3635 * We need the mb() to ensure the ordering between the writing to
3636 * sc->port.pmf here and reading it from the bnx2x_periodic_task().
3640 /* enable nig attention */
3641 val = (0xff0f | (1 << (SC_VN(sc) + 4)));
3642 if (sc->devinfo.int_block == INT_BLOCK_HC) {
3643 REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, val);
3644 REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, val);
3645 } else if (!CHIP_IS_E1x(sc)) {
3646 REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, val);
3647 REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, val);
3650 bnx2x_stats_handle(sc, STATS_EVENT_PMF);
3653 static int bnx2x_mc_assert(struct bnx2x_softc *sc)
3657 __rte_unused uint32_t row0, row1, row2, row3;
3661 REG_RD8(sc, BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_INDEX_OFFSET);
3663 PMD_DRV_LOG(ERR, "XSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
3665 /* print the asserts */
3666 for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
3670 BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i));
3673 BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
3677 BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
3681 BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
3684 if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
3686 "XSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
3687 i, row3, row2, row1, row0);
3696 REG_RD8(sc, BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_INDEX_OFFSET);
3698 PMD_DRV_LOG(ERR, "TSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
3701 /* print the asserts */
3702 for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
3706 BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i));
3709 BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
3713 BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
3717 BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
3720 if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
3722 "TSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
3723 i, row3, row2, row1, row0);
3732 REG_RD8(sc, BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_INDEX_OFFSET);
3734 PMD_DRV_LOG(ERR, "CSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
3737 /* print the asserts */
3738 for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
3742 BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i));
3745 BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
3749 BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
3753 BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
3756 if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
3758 "CSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
3759 i, row3, row2, row1, row0);
3768 REG_RD8(sc, BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_INDEX_OFFSET);
3770 PMD_DRV_LOG(ERR, "USTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
3773 /* print the asserts */
3774 for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
3778 BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i));
3781 BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
3785 BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
3789 BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
3792 if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
3794 "USTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
3795 i, row3, row2, row1, row0);
3805 static void bnx2x_attn_int_deasserted3(struct bnx2x_softc *sc, uint32_t attn)
3807 int func = SC_FUNC(sc);
3810 if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) {
3812 if (attn & BNX2X_PMF_LINK_ASSERT(sc)) {
3814 REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
3815 bnx2x_read_mf_cfg(sc);
3816 sc->devinfo.mf_info.mf_config[SC_VN(sc)] =
3818 func_mf_config[SC_ABS_FUNC(sc)].config);
3820 SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_status);
3822 if (val & DRV_STATUS_DCC_EVENT_MASK)
3825 DRV_STATUS_DCC_EVENT_MASK));
3827 if (val & DRV_STATUS_SET_MF_BW)
3828 bnx2x_set_mf_bw(sc);
3830 if (val & DRV_STATUS_DRV_INFO_REQ)
3831 bnx2x_handle_drv_info_req(sc);
3833 if ((sc->port.pmf == 0) && (val & DRV_STATUS_PMF))
3834 bnx2x_pmf_update(sc);
3836 if (val & DRV_STATUS_EEE_NEGOTIATION_RESULTS)
3837 bnx2x_handle_eee_event(sc);
3839 if (sc->link_vars.periodic_flags &
3840 ELINK_PERIODIC_FLAGS_LINK_EVENT) {
3841 /* sync with link */
3842 sc->link_vars.periodic_flags &=
3843 ~ELINK_PERIODIC_FLAGS_LINK_EVENT;
3845 bnx2x_link_sync_notify(sc);
3847 bnx2x_link_report(sc);
3851 * Always call it here: bnx2x_link_report() will
3852 * prevent the link indication duplication.
3854 bnx2x_link_status_update(sc);
3856 } else if (attn & BNX2X_MC_ASSERT_BITS) {
3858 PMD_DRV_LOG(ERR, "MC assert!");
3859 bnx2x_mc_assert(sc);
3860 REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_10, 0);
3861 REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_9, 0);
3862 REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_8, 0);
3863 REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_7, 0);
3864 rte_panic("MC assert!");
3866 } else if (attn & BNX2X_MCP_ASSERT) {
3868 PMD_DRV_LOG(ERR, "MCP assert!");
3869 REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_11, 0);
3873 "Unknown HW assert! (attn 0x%08x)", attn);
3877 if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) {
3878 PMD_DRV_LOG(ERR, "LATCHED attention 0x%08x (masked)", attn);
3879 if (attn & BNX2X_GRC_TIMEOUT) {
3880 val = REG_RD(sc, MISC_REG_GRC_TIMEOUT_ATTN);
3881 PMD_DRV_LOG(ERR, "GRC time-out 0x%08x", val);
3883 if (attn & BNX2X_GRC_RSV) {
3884 val = REG_RD(sc, MISC_REG_GRC_RSV_ATTN);
3885 PMD_DRV_LOG(ERR, "GRC reserved 0x%08x", val);
3887 REG_WR(sc, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff);
3891 static void bnx2x_attn_int_deasserted2(struct bnx2x_softc *sc, uint32_t attn)
3893 int port = SC_PORT(sc);
3895 uint32_t val0, mask0, val1, mask1;
3898 if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
3899 val = REG_RD(sc, CFC_REG_CFC_INT_STS_CLR);
3900 PMD_DRV_LOG(ERR, "CFC hw attention 0x%08x", val);
3901 /* CFC error attention */
3903 PMD_DRV_LOG(ERR, "FATAL error from CFC");
3907 if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
3908 val = REG_RD(sc, PXP_REG_PXP_INT_STS_CLR_0);
3909 PMD_DRV_LOG(ERR, "PXP hw attention-0 0x%08x", val);
3910 /* RQ_USDMDP_FIFO_OVERFLOW */
3911 if (val & 0x18000) {
3912 PMD_DRV_LOG(ERR, "FATAL error from PXP");
3915 if (!CHIP_IS_E1x(sc)) {
3916 val = REG_RD(sc, PXP_REG_PXP_INT_STS_CLR_1);
3917 PMD_DRV_LOG(ERR, "PXP hw attention-1 0x%08x", val);
3920 #define PXP2_EOP_ERROR_BIT PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR
3921 #define AEU_PXP2_HW_INT_BIT AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT
3923 if (attn & AEU_PXP2_HW_INT_BIT) {
3924 /* CQ47854 workaround do not panic on
3925 * PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR
3927 if (!CHIP_IS_E1x(sc)) {
3928 mask0 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_0);
3929 val1 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_1);
3930 mask1 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_1);
3931 val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_0);
3933 * If the olny PXP2_EOP_ERROR_BIT is set in
3934 * STS0 and STS1 - clear it
3936 * probably we lose additional attentions between
3937 * STS0 and STS_CLR0, in this case user will not
3938 * be notified about them
3940 if (val0 & mask0 & PXP2_EOP_ERROR_BIT &&
3942 val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_CLR_0);
3944 /* print the register, since no one can restore it */
3946 "PXP2_REG_PXP2_INT_STS_CLR_0 0x%08x", val0);
3949 * if PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR
3952 if (val0 & PXP2_EOP_ERROR_BIT) {
3953 PMD_DRV_LOG(ERR, "PXP2_WR_PGLUE_EOP_ERROR");
3956 * if only PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR is
3957 * set then clear attention from PXP2 block without panic
3959 if (((val0 & mask0) == PXP2_EOP_ERROR_BIT) &&
3960 ((val1 & mask1) == 0))
3961 attn &= ~AEU_PXP2_HW_INT_BIT;
3966 if (attn & HW_INTERRUT_ASSERT_SET_2) {
3967 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 :
3968 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2);
3970 val = REG_RD(sc, reg_offset);
3971 val &= ~(attn & HW_INTERRUT_ASSERT_SET_2);
3972 REG_WR(sc, reg_offset, val);
3975 "FATAL HW block attention set2 0x%x",
3976 (uint32_t) (attn & HW_INTERRUT_ASSERT_SET_2));
3977 rte_panic("HW block attention set2");
3981 static void bnx2x_attn_int_deasserted1(struct bnx2x_softc *sc, uint32_t attn)
3983 int port = SC_PORT(sc);
3987 if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) {
3988 val = REG_RD(sc, DORQ_REG_DORQ_INT_STS_CLR);
3989 PMD_DRV_LOG(ERR, "DB hw attention 0x%08x", val);
3990 /* DORQ discard attention */
3992 PMD_DRV_LOG(ERR, "FATAL error from DORQ");
3996 if (attn & HW_INTERRUT_ASSERT_SET_1) {
3997 reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 :
3998 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1);
4000 val = REG_RD(sc, reg_offset);
4001 val &= ~(attn & HW_INTERRUT_ASSERT_SET_1);
4002 REG_WR(sc, reg_offset, val);
4005 "FATAL HW block attention set1 0x%08x",
4006 (uint32_t) (attn & HW_INTERRUT_ASSERT_SET_1));
4007 rte_panic("HW block attention set1");
4011 static void bnx2x_attn_int_deasserted0(struct bnx2x_softc *sc, uint32_t attn)
4013 int port = SC_PORT(sc);
4017 reg_offset = (port) ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
4018 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
4020 if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) {
4021 val = REG_RD(sc, reg_offset);
4022 val &= ~AEU_INPUTS_ATTN_BITS_SPIO5;
4023 REG_WR(sc, reg_offset, val);
4025 PMD_DRV_LOG(WARNING, "SPIO5 hw attention");
4027 /* Fan failure attention */
4028 elink_hw_reset_phy(&sc->link_params);
4029 bnx2x_fan_failure(sc);
4032 if ((attn & sc->link_vars.aeu_int_mask) && sc->port.pmf) {
4033 elink_handle_module_detect_int(&sc->link_params);
4036 if (attn & HW_INTERRUT_ASSERT_SET_0) {
4037 val = REG_RD(sc, reg_offset);
4038 val &= ~(attn & HW_INTERRUT_ASSERT_SET_0);
4039 REG_WR(sc, reg_offset, val);
4041 rte_panic("FATAL HW block attention set0 0x%lx",
4042 (attn & HW_INTERRUT_ASSERT_SET_0));
4046 static void bnx2x_attn_int_deasserted(struct bnx2x_softc *sc, uint32_t deasserted)
4048 struct attn_route attn;
4049 struct attn_route *group_mask;
4050 int port = SC_PORT(sc);
4055 uint8_t global = FALSE;
4058 * Need to take HW lock because MCP or other port might also
4059 * try to handle this event.
4061 bnx2x_acquire_alr(sc);
4063 if (bnx2x_chk_parity_attn(sc, &global, TRUE)) {
4064 sc->recovery_state = BNX2X_RECOVERY_INIT;
4066 /* disable HW interrupts */
4067 bnx2x_int_disable(sc);
4068 bnx2x_release_alr(sc);
4072 attn.sig[0] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port * 4);
4073 attn.sig[1] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port * 4);
4074 attn.sig[2] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port * 4);
4075 attn.sig[3] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port * 4);
4076 if (!CHIP_IS_E1x(sc)) {
4078 REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port * 4);
4083 for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
4084 if (deasserted & (1 << index)) {
4085 group_mask = &sc->attn_group[index];
4087 bnx2x_attn_int_deasserted4(sc,
4089 sig[4] & group_mask->sig[4]);
4090 bnx2x_attn_int_deasserted3(sc,
4092 sig[3] & group_mask->sig[3]);
4093 bnx2x_attn_int_deasserted1(sc,
4095 sig[1] & group_mask->sig[1]);
4096 bnx2x_attn_int_deasserted2(sc,
4098 sig[2] & group_mask->sig[2]);
4099 bnx2x_attn_int_deasserted0(sc,
4101 sig[0] & group_mask->sig[0]);
4105 bnx2x_release_alr(sc);
4107 if (sc->devinfo.int_block == INT_BLOCK_HC) {
4108 reg_addr = (HC_REG_COMMAND_REG + port * 32 +
4109 COMMAND_REG_ATTN_BITS_CLR);
4111 reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_CLR_UPPER * 8);
4116 "about to mask 0x%08x at %s addr 0x%08x", val,
4117 (sc->devinfo.int_block == INT_BLOCK_HC) ? "HC" : "IGU",
4119 REG_WR(sc, reg_addr, val);
4121 if (~sc->attn_state & deasserted) {
4122 PMD_DRV_LOG(ERR, "IGU error");
4125 reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
4126 MISC_REG_AEU_MASK_ATTN_FUNC_0;
4128 bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
4130 aeu_mask = REG_RD(sc, reg_addr);
4132 aeu_mask |= (deasserted & 0x3ff);
4134 REG_WR(sc, reg_addr, aeu_mask);
4135 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
4137 sc->attn_state &= ~deasserted;
4140 static void bnx2x_attn_int(struct bnx2x_softc *sc)
4142 /* read local copy of bits */
4143 uint32_t attn_bits = le32toh(sc->def_sb->atten_status_block.attn_bits);
4145 le32toh(sc->def_sb->atten_status_block.attn_bits_ack);
4146 uint32_t attn_state = sc->attn_state;
4148 /* look for changed bits */
4149 uint32_t asserted = attn_bits & ~attn_ack & ~attn_state;
4150 uint32_t deasserted = ~attn_bits & attn_ack & attn_state;
4153 "attn_bits 0x%08x attn_ack 0x%08x asserted 0x%08x deasserted 0x%08x",
4154 attn_bits, attn_ack, asserted, deasserted);
4156 if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state)) {
4157 PMD_DRV_LOG(ERR, "BAD attention state");
4160 /* handle bits that were raised */
4162 bnx2x_attn_int_asserted(sc, asserted);
4166 bnx2x_attn_int_deasserted(sc, deasserted);
4170 static uint16_t bnx2x_update_dsb_idx(struct bnx2x_softc *sc)
4172 struct host_sp_status_block *def_sb = sc->def_sb;
4175 mb(); /* status block is written to by the chip */
4177 if (sc->def_att_idx != def_sb->atten_status_block.attn_bits_index) {
4178 sc->def_att_idx = def_sb->atten_status_block.attn_bits_index;
4179 rc |= BNX2X_DEF_SB_ATT_IDX;
4182 if (sc->def_idx != def_sb->sp_sb.running_index) {
4183 sc->def_idx = def_sb->sp_sb.running_index;
4184 rc |= BNX2X_DEF_SB_IDX;
4192 static struct ecore_queue_sp_obj *bnx2x_cid_to_q_obj(struct bnx2x_softc *sc,
4195 return &sc->sp_objs[CID_TO_FP(cid, sc)].q_obj;
4198 static void bnx2x_handle_mcast_eqe(struct bnx2x_softc *sc)
4200 struct ecore_mcast_ramrod_params rparam;
4203 memset(&rparam, 0, sizeof(rparam));
4205 rparam.mcast_obj = &sc->mcast_obj;
4207 /* clear pending state for the last command */
4208 sc->mcast_obj.raw.clear_pending(&sc->mcast_obj.raw);
4210 /* if there are pending mcast commands - send them */
4211 if (sc->mcast_obj.check_pending(&sc->mcast_obj)) {
4212 rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
4215 "Failed to send pending mcast commands (%d)",
4222 bnx2x_handle_classification_eqe(struct bnx2x_softc *sc, union event_ring_elem *elem)
4224 unsigned long ramrod_flags = 0;
4226 uint32_t cid = elem->message.data.eth_event.echo & BNX2X_SWCID_MASK;
4227 struct ecore_vlan_mac_obj *vlan_mac_obj;
4229 /* always push next commands out, don't wait here */
4230 bnx2x_set_bit(RAMROD_CONT, &ramrod_flags);
4232 switch (le32toh(elem->message.data.eth_event.echo) >> BNX2X_SWCID_SHIFT) {
4233 case ECORE_FILTER_MAC_PENDING:
4234 PMD_DRV_LOG(DEBUG, "Got SETUP_MAC completions");
4235 vlan_mac_obj = &sc->sp_objs[cid].mac_obj;
4238 case ECORE_FILTER_MCAST_PENDING:
4239 PMD_DRV_LOG(DEBUG, "Got SETUP_MCAST completions");
4240 bnx2x_handle_mcast_eqe(sc);
4244 PMD_DRV_LOG(NOTICE, "Unsupported classification command: %d",
4245 elem->message.data.eth_event.echo);
4249 rc = vlan_mac_obj->complete(sc, vlan_mac_obj, elem, &ramrod_flags);
4252 PMD_DRV_LOG(NOTICE, "Failed to schedule new commands (%d)", rc);
4253 } else if (rc > 0) {
4254 PMD_DRV_LOG(DEBUG, "Scheduled next pending commands...");
4258 static void bnx2x_handle_rx_mode_eqe(struct bnx2x_softc *sc)
4260 bnx2x_clear_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);
4262 /* send rx_mode command again if was requested */
4263 if (bnx2x_test_and_clear_bit(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state)) {
4264 bnx2x_set_storm_rx_mode(sc);
4268 static void bnx2x_update_eq_prod(struct bnx2x_softc *sc, uint16_t prod)
4270 storm_memset_eq_prod(sc, prod, SC_FUNC(sc));
4271 wmb(); /* keep prod updates ordered */
4274 static void bnx2x_eq_int(struct bnx2x_softc *sc)
4276 uint16_t hw_cons, sw_cons, sw_prod;
4277 union event_ring_elem *elem;
4282 struct ecore_queue_sp_obj *q_obj;
4283 struct ecore_func_sp_obj *f_obj = &sc->func_obj;
4284 struct ecore_raw_obj *rss_raw = &sc->rss_conf_obj.raw;
4286 hw_cons = le16toh(*sc->eq_cons_sb);
4289 * The hw_cons range is 1-255, 257 - the sw_cons range is 0-254, 256.
4290 * when we get to the next-page we need to adjust so the loop
4291 * condition below will be met. The next element is the size of a
4292 * regular element and hence incrementing by 1
4294 if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE) {
4299 * This function may never run in parallel with itself for a
4300 * specific sc and no need for a read memory barrier here.
4302 sw_cons = sc->eq_cons;
4303 sw_prod = sc->eq_prod;
4307 sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) {
4309 elem = &sc->eq[EQ_DESC(sw_cons)];
4311 /* elem CID originates from FW, actually LE */
4312 cid = SW_CID(elem->message.data.cfc_del_event.cid);
4313 opcode = elem->message.opcode;
4315 /* handle eq element */
4317 case EVENT_RING_OPCODE_STAT_QUERY:
4318 PMD_DEBUG_PERIODIC_LOG(DEBUG, "got statistics completion event %d",
4320 /* nothing to do with stats comp */
4323 case EVENT_RING_OPCODE_CFC_DEL:
4324 /* handle according to cid range */
4325 /* we may want to verify here that the sc state is HALTING */
4326 PMD_DRV_LOG(DEBUG, "got delete ramrod for MULTI[%d]",
4328 q_obj = bnx2x_cid_to_q_obj(sc, cid);
4329 if (q_obj->complete_cmd(sc, q_obj, ECORE_Q_CMD_CFC_DEL)) {
4334 case EVENT_RING_OPCODE_STOP_TRAFFIC:
4335 PMD_DRV_LOG(DEBUG, "got STOP TRAFFIC");
4336 if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_TX_STOP)) {
4341 case EVENT_RING_OPCODE_START_TRAFFIC:
4342 PMD_DRV_LOG(DEBUG, "got START TRAFFIC");
4343 if (f_obj->complete_cmd
4344 (sc, f_obj, ECORE_F_CMD_TX_START)) {
4349 case EVENT_RING_OPCODE_FUNCTION_UPDATE:
4350 echo = elem->message.data.function_update_event.echo;
4351 if (echo == SWITCH_UPDATE) {
4353 "got FUNC_SWITCH_UPDATE ramrod");
4354 if (f_obj->complete_cmd(sc, f_obj,
4355 ECORE_F_CMD_SWITCH_UPDATE))
4361 "AFEX: ramrod completed FUNCTION_UPDATE");
4362 f_obj->complete_cmd(sc, f_obj,
4363 ECORE_F_CMD_AFEX_UPDATE);
4367 case EVENT_RING_OPCODE_FORWARD_SETUP:
4368 q_obj = &bnx2x_fwd_sp_obj(sc, q_obj);
4369 if (q_obj->complete_cmd(sc, q_obj,
4370 ECORE_Q_CMD_SETUP_TX_ONLY)) {
4375 case EVENT_RING_OPCODE_FUNCTION_START:
4376 PMD_DRV_LOG(DEBUG, "got FUNC_START ramrod");
4377 if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_START)) {
4382 case EVENT_RING_OPCODE_FUNCTION_STOP:
4383 PMD_DRV_LOG(DEBUG, "got FUNC_STOP ramrod");
4384 if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_STOP)) {
4390 switch (opcode | sc->state) {
4391 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | BNX2X_STATE_OPEN):
4392 case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | BNX2X_STATE_OPENING_WAITING_PORT):
4394 elem->message.data.eth_event.echo & BNX2X_SWCID_MASK;
4395 PMD_DRV_LOG(DEBUG, "got RSS_UPDATE ramrod. CID %d",
4397 rss_raw->clear_pending(rss_raw);
4400 case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_OPEN):
4401 case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_DIAG):
4402 case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_CLOSING_WAITING_HALT):
4403 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_OPEN):
4404 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_DIAG):
4405 case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
4407 "got (un)set mac ramrod");
4408 bnx2x_handle_classification_eqe(sc, elem);
4411 case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_OPEN):
4412 case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_DIAG):
4413 case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
4415 "got mcast ramrod");
4416 bnx2x_handle_mcast_eqe(sc);
4419 case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_OPEN):
4420 case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_DIAG):
4421 case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
4423 "got rx_mode ramrod");
4424 bnx2x_handle_rx_mode_eqe(sc);
4428 /* unknown event log error and continue */
4429 PMD_DRV_LOG(INFO, "Unknown EQ event %d, sc->state 0x%x",
4430 elem->message.opcode, sc->state);
4438 atomic_add_acq_long(&sc->eq_spq_left, spqe_cnt);
4440 sc->eq_cons = sw_cons;
4441 sc->eq_prod = sw_prod;
4443 /* make sure that above mem writes were issued towards the memory */
4446 /* update producer */
4447 bnx2x_update_eq_prod(sc, sc->eq_prod);
4450 static int bnx2x_handle_sp_tq(struct bnx2x_softc *sc)
4455 /* what work needs to be performed? */
4456 status = bnx2x_update_dsb_idx(sc);
4459 if (status & BNX2X_DEF_SB_ATT_IDX) {
4460 PMD_DRV_LOG(DEBUG, "---> ATTN INTR <---");
4462 status &= ~BNX2X_DEF_SB_ATT_IDX;
4466 /* SP events: STAT_QUERY and others */
4467 if (status & BNX2X_DEF_SB_IDX) {
4468 /* handle EQ completions */
4469 PMD_DEBUG_PERIODIC_LOG(DEBUG, "---> EQ INTR <---");
4471 bnx2x_ack_sb(sc, sc->igu_dsb_id, USTORM_ID,
4472 le16toh(sc->def_idx), IGU_INT_NOP, 1);
4473 status &= ~BNX2X_DEF_SB_IDX;
4476 /* if status is non zero then something went wrong */
4477 if (unlikely(status)) {
4479 "Got an unknown SP interrupt! (0x%04x)", status);
4482 /* ack status block only if something was actually handled */
4483 bnx2x_ack_sb(sc, sc->igu_dsb_id, ATTENTION_ID,
4484 le16toh(sc->def_att_idx), IGU_INT_ENABLE, 1);
4489 static void bnx2x_handle_fp_tq(struct bnx2x_fastpath *fp, int scan_fp)
4491 struct bnx2x_softc *sc = fp->sc;
4492 uint8_t more_rx = FALSE;
4494 /* update the fastpath index */
4495 bnx2x_update_fp_sb_idx(fp);
4498 if (bnx2x_has_rx_work(fp)) {
4499 more_rx = bnx2x_rxeof(sc, fp);
4503 /* still more work to do */
4504 bnx2x_handle_fp_tq(fp, scan_fp);
4509 bnx2x_ack_sb(sc, fp->igu_sb_id, USTORM_ID,
4510 le16toh(fp->fp_hc_idx), IGU_INT_DISABLE, 1);
4514 * Legacy interrupt entry point.
4516 * Verifies that the controller generated the interrupt and
4517 * then calls a separate routine to handle the various
4518 * interrupt causes: link, RX, and TX.
4520 int bnx2x_intr_legacy(struct bnx2x_softc *sc, int scan_fp)
4522 struct bnx2x_fastpath *fp;
4523 uint32_t status, mask;
4527 * 0 for ustorm, 1 for cstorm
4528 * the bits returned from ack_int() are 0-15
4529 * bit 0 = attention status block
4530 * bit 1 = fast path status block
4531 * a mask of 0x2 or more = tx/rx event
4532 * a mask of 1 = slow path event
4535 status = bnx2x_ack_int(sc);
4537 /* the interrupt is not for us */
4538 if (unlikely(status == 0)) {
4542 PMD_DEBUG_PERIODIC_LOG(DEBUG, "Interrupt status 0x%04x", status);
4543 //bnx2x_dump_status_block(sc);
4545 FOR_EACH_ETH_QUEUE(sc, i) {
4547 mask = (0x2 << (fp->index + CNIC_SUPPORT(sc)));
4548 if (status & mask) {
4549 bnx2x_handle_fp_tq(fp, scan_fp);
4554 if (unlikely(status & 0x1)) {
4555 rc = bnx2x_handle_sp_tq(sc);
4559 if (unlikely(status)) {
4560 PMD_DRV_LOG(WARNING,
4561 "Unexpected fastpath status (0x%08x)!", status);
4567 static int bnx2x_init_hw_common_chip(struct bnx2x_softc *sc);
4568 static int bnx2x_init_hw_common(struct bnx2x_softc *sc);
4569 static int bnx2x_init_hw_port(struct bnx2x_softc *sc);
4570 static int bnx2x_init_hw_func(struct bnx2x_softc *sc);
4571 static void bnx2x_reset_common(struct bnx2x_softc *sc);
4572 static void bnx2x_reset_port(struct bnx2x_softc *sc);
4573 static void bnx2x_reset_func(struct bnx2x_softc *sc);
4574 static int bnx2x_init_firmware(struct bnx2x_softc *sc);
4575 static void bnx2x_release_firmware(struct bnx2x_softc *sc);
4578 ecore_func_sp_drv_ops bnx2x_func_sp_drv = {
4579 .init_hw_cmn_chip = bnx2x_init_hw_common_chip,
4580 .init_hw_cmn = bnx2x_init_hw_common,
4581 .init_hw_port = bnx2x_init_hw_port,
4582 .init_hw_func = bnx2x_init_hw_func,
4584 .reset_hw_cmn = bnx2x_reset_common,
4585 .reset_hw_port = bnx2x_reset_port,
4586 .reset_hw_func = bnx2x_reset_func,
4588 .init_fw = bnx2x_init_firmware,
4589 .release_fw = bnx2x_release_firmware,
4592 static void bnx2x_init_func_obj(struct bnx2x_softc *sc)
4596 PMD_INIT_FUNC_TRACE();
4598 ecore_init_func_obj(sc,
4600 BNX2X_SP(sc, func_rdata),
4601 (phys_addr_t)BNX2X_SP_MAPPING(sc, func_rdata),
4602 BNX2X_SP(sc, func_afex_rdata),
4603 (phys_addr_t)BNX2X_SP_MAPPING(sc, func_afex_rdata),
4604 &bnx2x_func_sp_drv);
4607 static int bnx2x_init_hw(struct bnx2x_softc *sc, uint32_t load_code)
4609 struct ecore_func_state_params func_params = { NULL };
4612 PMD_INIT_FUNC_TRACE();
4614 /* prepare the parameters for function state transitions */
4615 bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
4617 func_params.f_obj = &sc->func_obj;
4618 func_params.cmd = ECORE_F_CMD_HW_INIT;
4620 func_params.params.hw_init.load_phase = load_code;
4623 * Via a plethora of function pointers, we will eventually reach
4624 * bnx2x_init_hw_common(), bnx2x_init_hw_port(), or bnx2x_init_hw_func().
4626 rc = ecore_func_state_change(sc, &func_params);
4632 bnx2x_fill(struct bnx2x_softc *sc, uint32_t addr, int fill, uint32_t len)
4636 if (!(len % 4) && !(addr % 4)) {
4637 for (i = 0; i < len; i += 4) {
4638 REG_WR(sc, (addr + i), fill);
4641 for (i = 0; i < len; i++) {
4642 REG_WR8(sc, (addr + i), fill);
4647 /* writes FP SP data to FW - data_size in dwords */
4649 bnx2x_wr_fp_sb_data(struct bnx2x_softc *sc, int fw_sb_id, uint32_t * sb_data_p,
4654 for (index = 0; index < data_size; index++) {
4656 (BAR_CSTRORM_INTMEM +
4657 CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id) +
4658 (sizeof(uint32_t) * index)), *(sb_data_p + index));
4662 static void bnx2x_zero_fp_sb(struct bnx2x_softc *sc, int fw_sb_id)
4664 struct hc_status_block_data_e2 sb_data_e2;
4665 struct hc_status_block_data_e1x sb_data_e1x;
4666 uint32_t *sb_data_p;
4667 uint32_t data_size = 0;
4669 if (!CHIP_IS_E1x(sc)) {
4670 memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
4671 sb_data_e2.common.state = SB_DISABLED;
4672 sb_data_e2.common.p_func.vf_valid = FALSE;
4673 sb_data_p = (uint32_t *) & sb_data_e2;
4674 data_size = (sizeof(struct hc_status_block_data_e2) /
4677 memset(&sb_data_e1x, 0,
4678 sizeof(struct hc_status_block_data_e1x));
4679 sb_data_e1x.common.state = SB_DISABLED;
4680 sb_data_e1x.common.p_func.vf_valid = FALSE;
4681 sb_data_p = (uint32_t *) & sb_data_e1x;
4682 data_size = (sizeof(struct hc_status_block_data_e1x) /
4686 bnx2x_wr_fp_sb_data(sc, fw_sb_id, sb_data_p, data_size);
4689 (BAR_CSTRORM_INTMEM + CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id)), 0,
4690 CSTORM_STATUS_BLOCK_SIZE);
4691 bnx2x_fill(sc, (BAR_CSTRORM_INTMEM + CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id)),
4692 0, CSTORM_SYNC_BLOCK_SIZE);
4696 bnx2x_wr_sp_sb_data(struct bnx2x_softc *sc,
4697 struct hc_sp_status_block_data *sp_sb_data)
4702 i < (sizeof(struct hc_sp_status_block_data) / sizeof(uint32_t));
4705 (BAR_CSTRORM_INTMEM +
4706 CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(SC_FUNC(sc)) +
4707 (i * sizeof(uint32_t))),
4708 *((uint32_t *) sp_sb_data + i));
4712 static void bnx2x_zero_sp_sb(struct bnx2x_softc *sc)
4714 struct hc_sp_status_block_data sp_sb_data;
4716 memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
4718 sp_sb_data.state = SB_DISABLED;
4719 sp_sb_data.p_func.vf_valid = FALSE;
4721 bnx2x_wr_sp_sb_data(sc, &sp_sb_data);
4724 (BAR_CSTRORM_INTMEM +
4725 CSTORM_SP_STATUS_BLOCK_OFFSET(SC_FUNC(sc))),
4726 0, CSTORM_SP_STATUS_BLOCK_SIZE);
4728 (BAR_CSTRORM_INTMEM +
4729 CSTORM_SP_SYNC_BLOCK_OFFSET(SC_FUNC(sc))),
4730 0, CSTORM_SP_SYNC_BLOCK_SIZE);
4734 bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm, int igu_sb_id,
4737 hc_sm->igu_sb_id = igu_sb_id;
4738 hc_sm->igu_seg_id = igu_seg_id;
4739 hc_sm->timer_value = 0xFF;
4740 hc_sm->time_to_expire = 0xFFFFFFFF;
4743 static void bnx2x_map_sb_state_machines(struct hc_index_data *index_data)
4745 /* zero out state machine indices */
4748 index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
4751 index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
4752 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID;
4753 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID;
4754 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID;
4759 index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |=
4760 (SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
4763 index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |=
4764 (SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
4765 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |=
4766 (SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
4767 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |=
4768 (SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
4769 index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |=
4770 (SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
4774 bnx2x_init_sb(struct bnx2x_softc *sc, phys_addr_t busaddr, int vfid,
4775 uint8_t vf_valid, int fw_sb_id, int igu_sb_id)
4777 struct hc_status_block_data_e2 sb_data_e2;
4778 struct hc_status_block_data_e1x sb_data_e1x;
4779 struct hc_status_block_sm *hc_sm_p;
4780 uint32_t *sb_data_p;
4784 if (CHIP_INT_MODE_IS_BC(sc)) {
4785 igu_seg_id = HC_SEG_ACCESS_NORM;
4787 igu_seg_id = IGU_SEG_ACCESS_NORM;
4790 bnx2x_zero_fp_sb(sc, fw_sb_id);
4792 if (!CHIP_IS_E1x(sc)) {
4793 memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
4794 sb_data_e2.common.state = SB_ENABLED;
4795 sb_data_e2.common.p_func.pf_id = SC_FUNC(sc);
4796 sb_data_e2.common.p_func.vf_id = vfid;
4797 sb_data_e2.common.p_func.vf_valid = vf_valid;
4798 sb_data_e2.common.p_func.vnic_id = SC_VN(sc);
4799 sb_data_e2.common.same_igu_sb_1b = TRUE;
4800 sb_data_e2.common.host_sb_addr.hi = U64_HI(busaddr);
4801 sb_data_e2.common.host_sb_addr.lo = U64_LO(busaddr);
4802 hc_sm_p = sb_data_e2.common.state_machine;
4803 sb_data_p = (uint32_t *) & sb_data_e2;
4804 data_size = (sizeof(struct hc_status_block_data_e2) /
4806 bnx2x_map_sb_state_machines(sb_data_e2.index_data);
4808 memset(&sb_data_e1x, 0,
4809 sizeof(struct hc_status_block_data_e1x));
4810 sb_data_e1x.common.state = SB_ENABLED;
4811 sb_data_e1x.common.p_func.pf_id = SC_FUNC(sc);
4812 sb_data_e1x.common.p_func.vf_id = 0xff;
4813 sb_data_e1x.common.p_func.vf_valid = FALSE;
4814 sb_data_e1x.common.p_func.vnic_id = SC_VN(sc);
4815 sb_data_e1x.common.same_igu_sb_1b = TRUE;
4816 sb_data_e1x.common.host_sb_addr.hi = U64_HI(busaddr);
4817 sb_data_e1x.common.host_sb_addr.lo = U64_LO(busaddr);
4818 hc_sm_p = sb_data_e1x.common.state_machine;
4819 sb_data_p = (uint32_t *) & sb_data_e1x;
4820 data_size = (sizeof(struct hc_status_block_data_e1x) /
4822 bnx2x_map_sb_state_machines(sb_data_e1x.index_data);
4825 bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID], igu_sb_id, igu_seg_id);
4826 bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_TX_ID], igu_sb_id, igu_seg_id);
4828 /* write indices to HW - PCI guarantees endianity of regpairs */
4829 bnx2x_wr_fp_sb_data(sc, fw_sb_id, sb_data_p, data_size);
4832 static uint8_t bnx2x_fp_qzone_id(struct bnx2x_fastpath *fp)
4834 if (CHIP_IS_E1x(fp->sc)) {
4835 return fp->cl_id + SC_PORT(fp->sc) * ETH_MAX_RX_CLIENTS_E1H;
4842 bnx2x_rx_ustorm_prods_offset(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp)
4844 uint32_t offset = BAR_USTRORM_INTMEM;
4847 return PXP_VF_ADDR_USDM_QUEUES_START +
4848 (sc->acquire_resp.resc.hw_qid[fp->index] *
4849 sizeof(struct ustorm_queue_zone_data));
4850 } else if (!CHIP_IS_E1x(sc)) {
4851 offset += USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id);
4853 offset += USTORM_RX_PRODS_E1X_OFFSET(SC_PORT(sc), fp->cl_id);
4859 static void bnx2x_init_eth_fp(struct bnx2x_softc *sc, int idx)
4861 struct bnx2x_fastpath *fp = &sc->fp[idx];
4862 uint32_t cids[ECORE_MULTI_TX_COS] = { 0 };
4863 unsigned long q_type = 0;
4869 fp->igu_sb_id = (sc->igu_base_sb + idx + CNIC_SUPPORT(sc));
4870 fp->fw_sb_id = (sc->base_fw_ndsb + idx + CNIC_SUPPORT(sc));
4872 if (CHIP_IS_E1x(sc))
4873 fp->cl_id = SC_L_ID(sc) + idx;
4875 /* want client ID same as IGU SB ID for non-E1 */
4876 fp->cl_id = fp->igu_sb_id;
4877 fp->cl_qzone_id = bnx2x_fp_qzone_id(fp);
4879 /* setup sb indices */
4880 if (!CHIP_IS_E1x(sc)) {
4881 fp->sb_index_values = fp->status_block.e2_sb->sb.index_values;
4882 fp->sb_running_index = fp->status_block.e2_sb->sb.running_index;
4884 fp->sb_index_values = fp->status_block.e1x_sb->sb.index_values;
4885 fp->sb_running_index =
4886 fp->status_block.e1x_sb->sb.running_index;
4890 fp->ustorm_rx_prods_offset = bnx2x_rx_ustorm_prods_offset(sc, fp);
4892 fp->rx_cq_cons_sb = &fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS];
4894 for (cos = 0; cos < sc->max_cos; cos++) {
4897 fp->tx_cons_sb = &fp->sb_index_values[HC_INDEX_ETH_TX_CQ_CONS_COS0];
4899 /* nothing more for a VF to do */
4904 bnx2x_init_sb(sc, fp->sb_dma.paddr, BNX2X_VF_ID_INVALID, FALSE,
4905 fp->fw_sb_id, fp->igu_sb_id);
4907 bnx2x_update_fp_sb_idx(fp);
4909 /* Configure Queue State object */
4910 bnx2x_set_bit(ECORE_Q_TYPE_HAS_RX, &q_type);
4911 bnx2x_set_bit(ECORE_Q_TYPE_HAS_TX, &q_type);
4913 ecore_init_queue_obj(sc,
4914 &sc->sp_objs[idx].q_obj,
4919 BNX2X_SP(sc, q_rdata),
4920 (phys_addr_t)BNX2X_SP_MAPPING(sc, q_rdata),
4923 /* configure classification DBs */
4924 ecore_init_mac_obj(sc,
4925 &sc->sp_objs[idx].mac_obj,
4929 BNX2X_SP(sc, mac_rdata),
4930 (phys_addr_t)BNX2X_SP_MAPPING(sc, mac_rdata),
4931 ECORE_FILTER_MAC_PENDING, &sc->sp_state,
4932 ECORE_OBJ_TYPE_RX_TX, &sc->macs_pool);
4936 bnx2x_update_rx_prod(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
4937 uint16_t rx_bd_prod, uint16_t rx_cq_prod)
4939 union ustorm_eth_rx_producers rx_prods;
4942 /* update producers */
4943 rx_prods.prod.bd_prod = rx_bd_prod;
4944 rx_prods.prod.cqe_prod = rx_cq_prod;
4945 rx_prods.prod.reserved = 0;
4948 * Make sure that the BD and SGE data is updated before updating the
4949 * producers since FW might read the BD/SGE right after the producer
4951 * This is only applicable for weak-ordered memory model archs such
4952 * as IA-64. The following barrier is also mandatory since FW will
4953 * assumes BDs must have buffers.
4957 for (i = 0; i < (sizeof(rx_prods) / 4); i++) {
4959 (fp->ustorm_rx_prods_offset + (i * 4)),
4960 rx_prods.raw_data[i]);
4963 wmb(); /* keep prod updates ordered */
4966 static void bnx2x_init_rx_rings(struct bnx2x_softc *sc)
4968 struct bnx2x_fastpath *fp;
4970 struct bnx2x_rx_queue *rxq;
4972 for (i = 0; i < sc->num_queues; i++) {
4974 rxq = sc->rx_queues[fp->index];
4976 PMD_RX_LOG(ERR, "RX queue is NULL");
4980 rxq->rx_bd_head = 0;
4981 rxq->rx_bd_tail = rxq->nb_rx_desc;
4982 rxq->rx_cq_head = 0;
4983 rxq->rx_cq_tail = TOTAL_RCQ_ENTRIES(rxq);
4984 *fp->rx_cq_cons_sb = 0;
4987 * Activate the BD ring...
4988 * Warning, this will generate an interrupt (to the TSTORM)
4989 * so this can only be done after the chip is initialized
4991 bnx2x_update_rx_prod(sc, fp, rxq->rx_bd_tail, rxq->rx_cq_tail);
4999 static void bnx2x_init_tx_ring_one(struct bnx2x_fastpath *fp)
5001 struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
5003 fp->tx_db.data.header.header = 1 << DOORBELL_HDR_DB_TYPE_SHIFT;
5004 fp->tx_db.data.zero_fill1 = 0;
5005 fp->tx_db.data.prod = 0;
5008 PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
5012 txq->tx_pkt_tail = 0;
5013 txq->tx_pkt_head = 0;
5014 txq->tx_bd_tail = 0;
5015 txq->tx_bd_head = 0;
5018 static void bnx2x_init_tx_rings(struct bnx2x_softc *sc)
5022 for (i = 0; i < sc->num_queues; i++) {
5023 bnx2x_init_tx_ring_one(&sc->fp[i]);
5027 static void bnx2x_init_def_sb(struct bnx2x_softc *sc)
5029 struct host_sp_status_block *def_sb = sc->def_sb;
5030 phys_addr_t mapping = sc->def_sb_dma.paddr;
5031 int igu_sp_sb_index;
5033 int port = SC_PORT(sc);
5034 int func = SC_FUNC(sc);
5035 int reg_offset, reg_offset_en5;
5038 struct hc_sp_status_block_data sp_sb_data;
5040 memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
5042 if (CHIP_INT_MODE_IS_BC(sc)) {
5043 igu_sp_sb_index = DEF_SB_IGU_ID;
5044 igu_seg_id = HC_SEG_ACCESS_DEF;
5046 igu_sp_sb_index = sc->igu_dsb_id;
5047 igu_seg_id = IGU_SEG_ACCESS_DEF;
5051 section = ((uint64_t) mapping +
5052 offsetof(struct host_sp_status_block, atten_status_block));
5053 def_sb->atten_status_block.status_block_id = igu_sp_sb_index;
5056 reg_offset = (port) ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
5057 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
5059 reg_offset_en5 = (port) ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 :
5060 MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0;
5062 for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
5063 /* take care of sig[0]..sig[4] */
5064 for (sindex = 0; sindex < 4; sindex++) {
5065 sc->attn_group[index].sig[sindex] =
5067 (reg_offset + (sindex * 0x4) +
5071 if (!CHIP_IS_E1x(sc)) {
5073 * enable5 is separate from the rest of the registers,
5074 * and the address skip is 4 and not 16 between the
5077 sc->attn_group[index].sig[4] =
5078 REG_RD(sc, (reg_offset_en5 + (0x4 * index)));
5080 sc->attn_group[index].sig[4] = 0;
5084 if (sc->devinfo.int_block == INT_BLOCK_HC) {
5086 port ? HC_REG_ATTN_MSG1_ADDR_L : HC_REG_ATTN_MSG0_ADDR_L;
5087 REG_WR(sc, reg_offset, U64_LO(section));
5088 REG_WR(sc, (reg_offset + 4), U64_HI(section));
5089 } else if (!CHIP_IS_E1x(sc)) {
5090 REG_WR(sc, IGU_REG_ATTN_MSG_ADDR_L, U64_LO(section));
5091 REG_WR(sc, IGU_REG_ATTN_MSG_ADDR_H, U64_HI(section));
5094 section = ((uint64_t) mapping +
5095 offsetof(struct host_sp_status_block, sp_sb));
5097 bnx2x_zero_sp_sb(sc);
5099 /* PCI guarantees endianity of regpair */
5100 sp_sb_data.state = SB_ENABLED;
5101 sp_sb_data.host_sb_addr.lo = U64_LO(section);
5102 sp_sb_data.host_sb_addr.hi = U64_HI(section);
5103 sp_sb_data.igu_sb_id = igu_sp_sb_index;
5104 sp_sb_data.igu_seg_id = igu_seg_id;
5105 sp_sb_data.p_func.pf_id = func;
5106 sp_sb_data.p_func.vnic_id = SC_VN(sc);
5107 sp_sb_data.p_func.vf_id = 0xff;
5109 bnx2x_wr_sp_sb_data(sc, &sp_sb_data);
5111 bnx2x_ack_sb(sc, sc->igu_dsb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
5114 static void bnx2x_init_sp_ring(struct bnx2x_softc *sc)
5116 atomic_store_rel_long(&sc->cq_spq_left, MAX_SPQ_PENDING);
5117 sc->spq_prod_idx = 0;
5119 &sc->def_sb->sp_sb.index_values[HC_SP_INDEX_ETH_DEF_CONS];
5120 sc->spq_prod_bd = sc->spq;
5121 sc->spq_last_bd = (sc->spq_prod_bd + MAX_SP_DESC_CNT);
5124 static void bnx2x_init_eq_ring(struct bnx2x_softc *sc)
5126 union event_ring_elem *elem;
5129 for (i = 1; i <= NUM_EQ_PAGES; i++) {
5130 elem = &sc->eq[EQ_DESC_CNT_PAGE * i - 1];
5132 elem->next_page.addr.hi = htole32(U64_HI(sc->eq_dma.paddr +
5134 (i % NUM_EQ_PAGES)));
5135 elem->next_page.addr.lo = htole32(U64_LO(sc->eq_dma.paddr +
5137 (i % NUM_EQ_PAGES)));
5141 sc->eq_prod = NUM_EQ_DESC;
5142 sc->eq_cons_sb = &sc->def_sb->sp_sb.index_values[HC_SP_INDEX_EQ_CONS];
5144 atomic_store_rel_long(&sc->eq_spq_left,
5145 (min((MAX_SP_DESC_CNT - MAX_SPQ_PENDING),
5149 static void bnx2x_init_internal_common(struct bnx2x_softc *sc)
5155 * In switch independent mode, the TSTORM needs to accept
5156 * packets that failed classification, since approximate match
5157 * mac addresses aren't written to NIG LLH.
5160 (BAR_TSTRORM_INTMEM +
5161 TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET), 2);
5164 (BAR_TSTRORM_INTMEM +
5165 TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET), 0);
5168 * Zero this manually as its initialization is currently missing
5171 for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++) {
5173 (BAR_USTRORM_INTMEM + USTORM_AGG_DATA_OFFSET + (i * 4)),
5177 if (!CHIP_IS_E1x(sc)) {
5178 REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_IGU_MODE_OFFSET),
5179 CHIP_INT_MODE_IS_BC(sc) ? HC_IGU_BC_MODE :
5184 static void bnx2x_init_internal(struct bnx2x_softc *sc, uint32_t load_code)
5186 switch (load_code) {
5187 case FW_MSG_CODE_DRV_LOAD_COMMON:
5188 case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP:
5189 bnx2x_init_internal_common(sc);
5192 case FW_MSG_CODE_DRV_LOAD_PORT:
5196 case FW_MSG_CODE_DRV_LOAD_FUNCTION:
5197 /* internal memory per function is initialized inside bnx2x_pf_init */
5201 PMD_DRV_LOG(NOTICE, "Unknown load_code (0x%x) from MCP",
5208 storm_memset_func_cfg(struct bnx2x_softc *sc,
5209 struct tstorm_eth_function_common_config *tcfg,
5215 addr = (BAR_TSTRORM_INTMEM +
5216 TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(abs_fid));
5217 size = sizeof(struct tstorm_eth_function_common_config);
5218 ecore_storm_memset_struct(sc, addr, size, (uint32_t *) tcfg);
5221 static void bnx2x_func_init(struct bnx2x_softc *sc, struct bnx2x_func_init_params *p)
5223 struct tstorm_eth_function_common_config tcfg = { 0 };
5225 if (CHIP_IS_E1x(sc)) {
5226 storm_memset_func_cfg(sc, &tcfg, p->func_id);
5229 /* Enable the function in the FW */
5230 storm_memset_vf_to_pf(sc, p->func_id, p->pf_id);
5231 storm_memset_func_en(sc, p->func_id, 1);
5234 if (p->func_flgs & FUNC_FLG_SPQ) {
5235 storm_memset_spq_addr(sc, p->spq_map, p->func_id);
5237 (XSEM_REG_FAST_MEMORY +
5238 XSTORM_SPQ_PROD_OFFSET(p->func_id)), p->spq_prod);
5243 * Calculates the sum of vn_min_rates.
5244 * It's needed for further normalizing of the min_rates.
5246 * sum of vn_min_rates.
5248 * 0 - if all the min_rates are 0.
5249 * In the later case fainess algorithm should be deactivated.
5250 * If all min rates are not zero then those that are zeroes will be set to 1.
5252 static void bnx2x_calc_vn_min(struct bnx2x_softc *sc, struct cmng_init_input *input)
5255 uint32_t vn_min_rate;
5259 for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
5260 vn_cfg = sc->devinfo.mf_info.mf_config[vn];
5261 vn_min_rate = (((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
5262 FUNC_MF_CFG_MIN_BW_SHIFT) * 100);
5264 if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
5265 /* skip hidden VNs */
5267 } else if (!vn_min_rate) {
5268 /* If min rate is zero - set it to 100 */
5269 vn_min_rate = DEF_MIN_RATE;
5274 input->vnic_min_rate[vn] = vn_min_rate;
5277 /* if ETS or all min rates are zeros - disable fairness */
5279 input->flags.cmng_enables &= ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
5281 input->flags.cmng_enables |= CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
5286 bnx2x_extract_max_cfg(__rte_unused struct bnx2x_softc *sc, uint32_t mf_cfg)
5288 uint16_t max_cfg = ((mf_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
5289 FUNC_MF_CFG_MAX_BW_SHIFT);
5293 "Max BW configured to 0 - using 100 instead");
5301 bnx2x_calc_vn_max(struct bnx2x_softc *sc, int vn, struct cmng_init_input *input)
5303 uint16_t vn_max_rate;
5304 uint32_t vn_cfg = sc->devinfo.mf_info.mf_config[vn];
5307 if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
5310 max_cfg = bnx2x_extract_max_cfg(sc, vn_cfg);
5313 /* max_cfg in percents of linkspeed */
5315 ((sc->link_vars.line_speed * max_cfg) / 100);
5316 } else { /* SD modes */
5317 /* max_cfg is absolute in 100Mb units */
5318 vn_max_rate = (max_cfg * 100);
5322 input->vnic_max_rate[vn] = vn_max_rate;
5326 bnx2x_cmng_fns_init(struct bnx2x_softc *sc, uint8_t read_cfg, uint8_t cmng_type)
5328 struct cmng_init_input input;
5331 memset(&input, 0, sizeof(struct cmng_init_input));
5333 input.port_rate = sc->link_vars.line_speed;
5335 if (cmng_type == CMNG_FNS_MINMAX) {
5336 /* read mf conf from shmem */
5338 bnx2x_read_mf_cfg(sc);
5341 /* get VN min rate and enable fairness if not 0 */
5342 bnx2x_calc_vn_min(sc, &input);
5344 /* get VN max rate */
5346 for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
5347 bnx2x_calc_vn_max(sc, vn, &input);
5351 /* always enable rate shaping and fairness */
5352 input.flags.cmng_enables |= CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN;
5354 ecore_init_cmng(&input, &sc->cmng);
5359 static int bnx2x_get_cmng_fns_mode(struct bnx2x_softc *sc)
5361 if (CHIP_REV_IS_SLOW(sc)) {
5362 return CMNG_FNS_NONE;
5366 return CMNG_FNS_MINMAX;
5369 return CMNG_FNS_NONE;
5373 storm_memset_cmng(struct bnx2x_softc *sc, struct cmng_init *cmng, uint8_t port)
5380 addr = (BAR_XSTRORM_INTMEM + XSTORM_CMNG_PER_PORT_VARS_OFFSET(port));
5381 size = sizeof(struct cmng_struct_per_port);
5382 ecore_storm_memset_struct(sc, addr, size, (uint32_t *) & cmng->port);
5384 for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
5385 func = func_by_vn(sc, vn);
5387 addr = (BAR_XSTRORM_INTMEM +
5388 XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func));
5389 size = sizeof(struct rate_shaping_vars_per_vn);
5390 ecore_storm_memset_struct(sc, addr, size,
5391 (uint32_t *) & cmng->
5392 vnic.vnic_max_rate[vn]);
5394 addr = (BAR_XSTRORM_INTMEM +
5395 XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func));
5396 size = sizeof(struct fairness_vars_per_vn);
5397 ecore_storm_memset_struct(sc, addr, size,
5398 (uint32_t *) & cmng->
5399 vnic.vnic_min_rate[vn]);
5403 static void bnx2x_pf_init(struct bnx2x_softc *sc)
5405 struct bnx2x_func_init_params func_init;
5406 struct event_ring_data eq_data;
5409 memset(&eq_data, 0, sizeof(struct event_ring_data));
5410 memset(&func_init, 0, sizeof(struct bnx2x_func_init_params));
5412 if (!CHIP_IS_E1x(sc)) {
5413 /* reset IGU PF statistics: MSIX + ATTN */
5416 (IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
5417 (BNX2X_IGU_STAS_MSG_VF_CNT * 4) +
5418 ((CHIP_IS_MODE_4_PORT(sc) ? SC_FUNC(sc) : SC_VN(sc)) *
5422 (IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
5423 (BNX2X_IGU_STAS_MSG_VF_CNT * 4) +
5424 (BNX2X_IGU_STAS_MSG_PF_CNT * 4) +
5425 ((CHIP_IS_MODE_4_PORT(sc) ? SC_FUNC(sc) : SC_VN(sc)) *
5429 /* function setup flags */
5430 flags = (FUNC_FLG_STATS | FUNC_FLG_LEADING | FUNC_FLG_SPQ);
5432 func_init.func_flgs = flags;
5433 func_init.pf_id = SC_FUNC(sc);
5434 func_init.func_id = SC_FUNC(sc);
5435 func_init.spq_map = sc->spq_dma.paddr;
5436 func_init.spq_prod = sc->spq_prod_idx;
5438 bnx2x_func_init(sc, &func_init);
5440 memset(&sc->cmng, 0, sizeof(struct cmng_struct_per_port));
5443 * Congestion management values depend on the link rate.
5444 * There is no active link so initial link rate is set to 10Gbps.
5445 * When the link comes up the congestion management values are
5446 * re-calculated according to the actual link rate.
5448 sc->link_vars.line_speed = SPEED_10000;
5449 bnx2x_cmng_fns_init(sc, TRUE, bnx2x_get_cmng_fns_mode(sc));
5451 /* Only the PMF sets the HW */
5453 storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
5456 /* init Event Queue - PCI bus guarantees correct endainity */
5457 eq_data.base_addr.hi = U64_HI(sc->eq_dma.paddr);
5458 eq_data.base_addr.lo = U64_LO(sc->eq_dma.paddr);
5459 eq_data.producer = sc->eq_prod;
5460 eq_data.index_id = HC_SP_INDEX_EQ_CONS;
5461 eq_data.sb_id = DEF_SB_ID;
5462 storm_memset_eq_data(sc, &eq_data, SC_FUNC(sc));
5465 static void bnx2x_hc_int_enable(struct bnx2x_softc *sc)
5467 int port = SC_PORT(sc);
5468 uint32_t addr = (port) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
5469 uint32_t val = REG_RD(sc, addr);
5470 uint8_t msix = (sc->interrupt_mode == INTR_MODE_MSIX)
5471 || (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
5472 uint8_t single_msix = (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
5473 uint8_t msi = (sc->interrupt_mode == INTR_MODE_MSI);
5476 val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
5477 HC_CONFIG_0_REG_INT_LINE_EN_0);
5478 val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
5479 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
5481 val |= HC_CONFIG_0_REG_SINGLE_ISR_EN_0;
5484 val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0;
5485 val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
5486 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
5487 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
5489 val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
5490 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
5491 HC_CONFIG_0_REG_INT_LINE_EN_0 |
5492 HC_CONFIG_0_REG_ATTN_BIT_EN_0);
5494 REG_WR(sc, addr, val);
5496 val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0;
5499 REG_WR(sc, addr, val);
5501 /* ensure that HC_CONFIG is written before leading/trailing edge config */
5504 /* init leading/trailing edge */
5506 val = (0xee0f | (1 << (SC_VN(sc) + 4)));
5508 /* enable nig and gpio3 attention */
5515 REG_WR(sc, (HC_REG_TRAILING_EDGE_0 + port * 8), val);
5516 REG_WR(sc, (HC_REG_LEADING_EDGE_0 + port * 8), val);
5518 /* make sure that interrupts are indeed enabled from here on */
5522 static void bnx2x_igu_int_enable(struct bnx2x_softc *sc)
5525 uint8_t msix = (sc->interrupt_mode == INTR_MODE_MSIX)
5526 || (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
5527 uint8_t single_msix = (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
5528 uint8_t msi = (sc->interrupt_mode == INTR_MODE_MSI);
5530 val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
5533 val &= ~(IGU_PF_CONF_INT_LINE_EN | IGU_PF_CONF_SINGLE_ISR_EN);
5534 val |= (IGU_PF_CONF_MSI_MSIX_EN | IGU_PF_CONF_ATTN_BIT_EN);
5536 val |= IGU_PF_CONF_SINGLE_ISR_EN;
5539 val &= ~IGU_PF_CONF_INT_LINE_EN;
5540 val |= (IGU_PF_CONF_MSI_MSIX_EN |
5541 IGU_PF_CONF_ATTN_BIT_EN | IGU_PF_CONF_SINGLE_ISR_EN);
5543 val &= ~IGU_PF_CONF_MSI_MSIX_EN;
5544 val |= (IGU_PF_CONF_INT_LINE_EN |
5545 IGU_PF_CONF_ATTN_BIT_EN | IGU_PF_CONF_SINGLE_ISR_EN);
5548 /* clean previous status - need to configure igu prior to ack */
5549 if ((!msix) || single_msix) {
5550 REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
5554 val |= IGU_PF_CONF_FUNC_EN;
5556 PMD_DRV_LOG(DEBUG, "write 0x%x to IGU mode %s",
5557 val, ((msix) ? "MSI-X" : ((msi) ? "MSI" : "INTx")));
5559 REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
5563 /* init leading/trailing edge */
5565 val = (0xee0f | (1 << (SC_VN(sc) + 4)));
5567 /* enable nig and gpio3 attention */
5574 REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, val);
5575 REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, val);
5577 /* make sure that interrupts are indeed enabled from here on */
5581 static void bnx2x_int_enable(struct bnx2x_softc *sc)
5583 if (sc->devinfo.int_block == INT_BLOCK_HC) {
5584 bnx2x_hc_int_enable(sc);
5586 bnx2x_igu_int_enable(sc);
5590 static void bnx2x_hc_int_disable(struct bnx2x_softc *sc)
5592 int port = SC_PORT(sc);
5593 uint32_t addr = (port) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
5594 uint32_t val = REG_RD(sc, addr);
5596 val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
5597 HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
5598 HC_CONFIG_0_REG_INT_LINE_EN_0 | HC_CONFIG_0_REG_ATTN_BIT_EN_0);
5599 /* flush all outstanding writes */
5602 REG_WR(sc, addr, val);
5603 if (REG_RD(sc, addr) != val) {
5604 PMD_DRV_LOG(ERR, "proper val not read from HC IGU!");
5608 static void bnx2x_igu_int_disable(struct bnx2x_softc *sc)
5610 uint32_t val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
5612 val &= ~(IGU_PF_CONF_MSI_MSIX_EN |
5613 IGU_PF_CONF_INT_LINE_EN | IGU_PF_CONF_ATTN_BIT_EN);
5615 PMD_DRV_LOG(DEBUG, "write %x to IGU", val);
5617 /* flush all outstanding writes */
5620 REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
5621 if (REG_RD(sc, IGU_REG_PF_CONFIGURATION) != val) {
5622 PMD_DRV_LOG(ERR, "proper val not read from IGU!");
5626 static void bnx2x_int_disable(struct bnx2x_softc *sc)
5628 if (sc->devinfo.int_block == INT_BLOCK_HC) {
5629 bnx2x_hc_int_disable(sc);
5631 bnx2x_igu_int_disable(sc);
5635 static void bnx2x_nic_init(struct bnx2x_softc *sc, int load_code)
5639 PMD_INIT_FUNC_TRACE();
5641 for (i = 0; i < sc->num_queues; i++) {
5642 bnx2x_init_eth_fp(sc, i);
5645 rmb(); /* ensure status block indices were read */
5647 bnx2x_init_rx_rings(sc);
5648 bnx2x_init_tx_rings(sc);
5651 bnx2x_memset_stats(sc);
5655 /* initialize MOD_ABS interrupts */
5656 elink_init_mod_abs_int(sc, &sc->link_vars,
5657 sc->devinfo.chip_id,
5658 sc->devinfo.shmem_base,
5659 sc->devinfo.shmem2_base, SC_PORT(sc));
5661 bnx2x_init_def_sb(sc);
5662 bnx2x_update_dsb_idx(sc);
5663 bnx2x_init_sp_ring(sc);
5664 bnx2x_init_eq_ring(sc);
5665 bnx2x_init_internal(sc, load_code);
5667 bnx2x_stats_init(sc);
5669 /* flush all before enabling interrupts */
5672 bnx2x_int_enable(sc);
5674 /* check for SPIO5 */
5675 bnx2x_attn_int_deasserted0(sc,
5677 (MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 +
5679 AEU_INPUTS_ATTN_BITS_SPIO5);
5682 static void bnx2x_init_objs(struct bnx2x_softc *sc)
5684 /* mcast rules must be added to tx if tx switching is enabled */
5685 ecore_obj_type o_type;
5686 if (sc->flags & BNX2X_TX_SWITCHING)
5687 o_type = ECORE_OBJ_TYPE_RX_TX;
5689 o_type = ECORE_OBJ_TYPE_RX;
5691 /* RX_MODE controlling object */
5692 ecore_init_rx_mode_obj(sc, &sc->rx_mode_obj);
5694 /* multicast configuration controlling object */
5695 ecore_init_mcast_obj(sc,
5701 BNX2X_SP(sc, mcast_rdata),
5702 (phys_addr_t)BNX2X_SP_MAPPING(sc, mcast_rdata),
5703 ECORE_FILTER_MCAST_PENDING,
5704 &sc->sp_state, o_type);
5706 /* Setup CAM credit pools */
5707 ecore_init_mac_credit_pool(sc,
5710 CHIP_IS_E1x(sc) ? VNICS_PER_PORT(sc) :
5711 VNICS_PER_PATH(sc));
5713 ecore_init_vlan_credit_pool(sc,
5715 SC_ABS_FUNC(sc) >> 1,
5716 CHIP_IS_E1x(sc) ? VNICS_PER_PORT(sc) :
5717 VNICS_PER_PATH(sc));
5719 /* RSS configuration object */
5720 ecore_init_rss_config_obj(&sc->rss_conf_obj,
5725 BNX2X_SP(sc, rss_rdata),
5726 (phys_addr_t)BNX2X_SP_MAPPING(sc, rss_rdata),
5727 ECORE_FILTER_RSS_CONF_PENDING,
5728 &sc->sp_state, ECORE_OBJ_TYPE_RX);
5732 * Initialize the function. This must be called before sending CLIENT_SETUP
5733 * for the first client.
5735 static int bnx2x_func_start(struct bnx2x_softc *sc)
5737 struct ecore_func_state_params func_params = { NULL };
5738 struct ecore_func_start_params *start_params =
5739 &func_params.params.start;
5741 /* Prepare parameters for function state transitions */
5742 bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
5744 func_params.f_obj = &sc->func_obj;
5745 func_params.cmd = ECORE_F_CMD_START;
5747 /* Function parameters */
5748 start_params->mf_mode = sc->devinfo.mf_info.mf_mode;
5749 start_params->sd_vlan_tag = OVLAN(sc);
5751 if (CHIP_IS_E2(sc) || CHIP_IS_E3(sc)) {
5752 start_params->network_cos_mode = STATIC_COS;
5753 } else { /* CHIP_IS_E1X */
5754 start_params->network_cos_mode = FW_WRR;
5757 start_params->gre_tunnel_mode = 0;
5758 start_params->gre_tunnel_rss = 0;
5760 return ecore_func_state_change(sc, &func_params);
5763 static int bnx2x_set_power_state(struct bnx2x_softc *sc, uint8_t state)
5767 /* If there is no power capability, silently succeed */
5768 if (!(sc->devinfo.pcie_cap_flags & BNX2X_PM_CAPABLE_FLAG)) {
5769 PMD_DRV_LOG(WARNING, "No power capability");
5773 pci_read(sc, (sc->devinfo.pcie_pm_cap_reg + PCIR_POWER_STATUS), &pmcsr,
5779 (sc->devinfo.pcie_pm_cap_reg +
5781 ((pmcsr & ~PCIM_PSTAT_DMASK) | PCIM_PSTAT_PME));
5783 if (pmcsr & PCIM_PSTAT_DMASK) {
5784 /* delay required during transition out of D3hot */
5791 /* don't shut down the power for emulation and FPGA */
5792 if (CHIP_REV_IS_SLOW(sc)) {
5796 pmcsr &= ~PCIM_PSTAT_DMASK;
5797 pmcsr |= PCIM_PSTAT_D3;
5800 pmcsr |= PCIM_PSTAT_PMEENABLE;
5804 (sc->devinfo.pcie_pm_cap_reg +
5805 PCIR_POWER_STATUS), pmcsr);
5808 * No more memory access after this point until device is brought back
5814 PMD_DRV_LOG(NOTICE, "Can't support PCI power state = %d",
5822 /* return true if succeeded to acquire the lock */
5823 static uint8_t bnx2x_trylock_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
5825 uint32_t lock_status;
5826 uint32_t resource_bit = (1 << resource);
5827 int func = SC_FUNC(sc);
5828 uint32_t hw_lock_control_reg;
5830 /* Validating that the resource is within range */
5831 if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
5833 "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)",
5834 resource, HW_LOCK_MAX_RESOURCE_VALUE);
5839 hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func * 8);
5841 hw_lock_control_reg =
5842 (MISC_REG_DRIVER_CONTROL_7 + (func - 6) * 8);
5845 /* try to acquire the lock */
5846 REG_WR(sc, hw_lock_control_reg + 4, resource_bit);
5847 lock_status = REG_RD(sc, hw_lock_control_reg);
5848 if (lock_status & resource_bit) {
5852 PMD_DRV_LOG(NOTICE, "Failed to get a resource lock 0x%x", resource);
5858 * Get the recovery leader resource id according to the engine this function
5859 * belongs to. Currently only only 2 engines is supported.
5861 static int bnx2x_get_leader_lock_resource(struct bnx2x_softc *sc)
5864 return HW_LOCK_RESOURCE_RECOVERY_LEADER_1;
5866 return HW_LOCK_RESOURCE_RECOVERY_LEADER_0;
5870 /* try to acquire a leader lock for current engine */
5871 static uint8_t bnx2x_trylock_leader_lock(struct bnx2x_softc *sc)
5873 return bnx2x_trylock_hw_lock(sc, bnx2x_get_leader_lock_resource(sc));
5876 static int bnx2x_release_leader_lock(struct bnx2x_softc *sc)
5878 return bnx2x_release_hw_lock(sc, bnx2x_get_leader_lock_resource(sc));
5881 /* close gates #2, #3 and #4 */
5882 static void bnx2x_set_234_gates(struct bnx2x_softc *sc, uint8_t close)
5886 /* gates #2 and #4a are closed/opened */
5888 REG_WR(sc, PXP_REG_HST_DISCARD_DOORBELLS, ! !close);
5890 REG_WR(sc, PXP_REG_HST_DISCARD_INTERNAL_WRITES, ! !close);
5893 if (CHIP_IS_E1x(sc)) {
5894 /* prevent interrupts from HC on both ports */
5895 val = REG_RD(sc, HC_REG_CONFIG_1);
5897 REG_WR(sc, HC_REG_CONFIG_1, (val & ~(uint32_t)
5898 HC_CONFIG_1_REG_BLOCK_DISABLE_1));
5900 REG_WR(sc, HC_REG_CONFIG_1,
5901 (val | HC_CONFIG_1_REG_BLOCK_DISABLE_1));
5903 val = REG_RD(sc, HC_REG_CONFIG_0);
5905 REG_WR(sc, HC_REG_CONFIG_0, (val & ~(uint32_t)
5906 HC_CONFIG_0_REG_BLOCK_DISABLE_0));
5908 REG_WR(sc, HC_REG_CONFIG_0,
5909 (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0));
5912 /* Prevent incomming interrupts in IGU */
5913 val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);
5916 REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION,
5918 IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
5920 REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION,
5922 IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
5928 /* poll for pending writes bit, it should get cleared in no more than 1s */
5929 static int bnx2x_er_poll_igu_vq(struct bnx2x_softc *sc)
5931 uint32_t cnt = 1000;
5932 uint32_t pend_bits = 0;
5935 pend_bits = REG_RD(sc, IGU_REG_PENDING_BITS_STATUS);
5937 if (pend_bits == 0) {
5942 } while (cnt-- > 0);
5945 PMD_DRV_LOG(NOTICE, "Still pending IGU requests bits=0x%08x!",
5953 #define SHARED_MF_CLP_MAGIC 0x80000000 /* 'magic' bit */
5955 static void bnx2x_clp_reset_prep(struct bnx2x_softc *sc, uint32_t * magic_val)
5957 /* Do some magic... */
5958 uint32_t val = MFCFG_RD(sc, shared_mf_config.clp_mb);
5959 *magic_val = val & SHARED_MF_CLP_MAGIC;
5960 MFCFG_WR(sc, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC);
5963 /* restore the value of the 'magic' bit */
5964 static void bnx2x_clp_reset_done(struct bnx2x_softc *sc, uint32_t magic_val)
5966 /* Restore the 'magic' bit value... */
5967 uint32_t val = MFCFG_RD(sc, shared_mf_config.clp_mb);
5968 MFCFG_WR(sc, shared_mf_config.clp_mb,
5969 (val & (~SHARED_MF_CLP_MAGIC)) | magic_val);
5972 /* prepare for MCP reset, takes care of CLP configurations */
5973 static void bnx2x_reset_mcp_prep(struct bnx2x_softc *sc, uint32_t * magic_val)
5976 uint32_t validity_offset;
5978 /* set `magic' bit in order to save MF config */
5979 bnx2x_clp_reset_prep(sc, magic_val);
5981 /* get shmem offset */
5982 shmem = REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
5984 offsetof(struct shmem_region, validity_map[SC_PORT(sc)]);
5986 /* Clear validity map flags */
5988 REG_WR(sc, shmem + validity_offset, 0);
5992 #define MCP_TIMEOUT 5000 /* 5 seconds (in ms) */
5993 #define MCP_ONE_TIMEOUT 100 /* 100 ms */
5995 static void bnx2x_mcp_wait_one(struct bnx2x_softc *sc)
5997 /* special handling for emulation and FPGA (10 times longer) */
5998 if (CHIP_REV_IS_SLOW(sc)) {
5999 DELAY((MCP_ONE_TIMEOUT * 10) * 1000);
6001 DELAY((MCP_ONE_TIMEOUT) * 1000);
6005 /* initialize shmem_base and waits for validity signature to appear */
6006 static int bnx2x_init_shmem(struct bnx2x_softc *sc)
6012 sc->devinfo.shmem_base =
6013 sc->link_params.shmem_base =
6014 REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
6016 if (sc->devinfo.shmem_base) {
6017 val = SHMEM_RD(sc, validity_map[SC_PORT(sc)]);
6018 if (val & SHR_MEM_VALIDITY_MB)
6022 bnx2x_mcp_wait_one(sc);
6024 } while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT));
6026 PMD_DRV_LOG(NOTICE, "BAD MCP validity signature");
6031 static int bnx2x_reset_mcp_comp(struct bnx2x_softc *sc, uint32_t magic_val)
6033 int rc = bnx2x_init_shmem(sc);
6035 /* Restore the `magic' bit value */
6036 bnx2x_clp_reset_done(sc, magic_val);
6041 static void bnx2x_pxp_prep(struct bnx2x_softc *sc)
6043 REG_WR(sc, PXP2_REG_RD_START_INIT, 0);
6044 REG_WR(sc, PXP2_REG_RQ_RBC_DONE, 0);
6049 * Reset the whole chip except for:
6051 * - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by one reset bit)
6053 * - MISC (including AEU)
6057 static void bnx2x_process_kill_chip_reset(struct bnx2x_softc *sc, uint8_t global)
6059 uint32_t not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2;
6060 uint32_t global_bits2, stay_reset2;
6063 * Bits that have to be set in reset_mask2 if we want to reset 'global'
6064 * (per chip) blocks.
6067 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU |
6068 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE;
6071 * Don't reset the following blocks.
6072 * Important: per port blocks (such as EMAC, BMAC, UMAC) can't be
6073 * reset, as in 4 port device they might still be owned
6074 * by the MCP (there is only one leader per path).
6077 MISC_REGISTERS_RESET_REG_1_RST_HC |
6078 MISC_REGISTERS_RESET_REG_1_RST_PXPV |
6079 MISC_REGISTERS_RESET_REG_1_RST_PXP;
6082 MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO |
6083 MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE |
6084 MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE |
6085 MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE |
6086 MISC_REGISTERS_RESET_REG_2_RST_RBCN |
6087 MISC_REGISTERS_RESET_REG_2_RST_GRC |
6088 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE |
6089 MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B |
6090 MISC_REGISTERS_RESET_REG_2_RST_ATC |
6091 MISC_REGISTERS_RESET_REG_2_PGLC |
6092 MISC_REGISTERS_RESET_REG_2_RST_BMAC0 |
6093 MISC_REGISTERS_RESET_REG_2_RST_BMAC1 |
6094 MISC_REGISTERS_RESET_REG_2_RST_EMAC0 |
6095 MISC_REGISTERS_RESET_REG_2_RST_EMAC1 |
6096 MISC_REGISTERS_RESET_REG_2_UMAC0 | MISC_REGISTERS_RESET_REG_2_UMAC1;
6099 * Keep the following blocks in reset:
6100 * - all xxMACs are handled by the elink code.
6103 MISC_REGISTERS_RESET_REG_2_XMAC |
6104 MISC_REGISTERS_RESET_REG_2_XMAC_SOFT;
6106 /* Full reset masks according to the chip */
6107 reset_mask1 = 0xffffffff;
6109 if (CHIP_IS_E1H(sc))
6110 reset_mask2 = 0x1ffff;
6111 else if (CHIP_IS_E2(sc))
6112 reset_mask2 = 0xfffff;
6113 else /* CHIP_IS_E3 */
6114 reset_mask2 = 0x3ffffff;
6116 /* Don't reset global blocks unless we need to */
6118 reset_mask2 &= ~global_bits2;
6121 * In case of attention in the QM, we need to reset PXP
6122 * (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM
6123 * because otherwise QM reset would release 'close the gates' shortly
6124 * before resetting the PXP, then the PSWRQ would send a write
6125 * request to PGLUE. Then when PXP is reset, PGLUE would try to
6126 * read the payload data from PSWWR, but PSWWR would not
6127 * respond. The write queue in PGLUE would stuck, dmae commands
6128 * would not return. Therefore it's important to reset the second
6129 * reset register (containing the
6130 * MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the
6131 * first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM
6134 REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
6135 reset_mask2 & (~not_reset_mask2));
6137 REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
6138 reset_mask1 & (~not_reset_mask1));
6143 REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
6144 reset_mask2 & (~stay_reset2));
6149 REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1);
6153 static int bnx2x_process_kill(struct bnx2x_softc *sc, uint8_t global)
6157 uint32_t sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2;
6158 uint32_t tags_63_32 = 0;
6160 /* Empty the Tetris buffer, wait for 1s */
6162 sr_cnt = REG_RD(sc, PXP2_REG_RD_SR_CNT);
6163 blk_cnt = REG_RD(sc, PXP2_REG_RD_BLK_CNT);
6164 port_is_idle_0 = REG_RD(sc, PXP2_REG_RD_PORT_IS_IDLE_0);
6165 port_is_idle_1 = REG_RD(sc, PXP2_REG_RD_PORT_IS_IDLE_1);
6166 pgl_exp_rom2 = REG_RD(sc, PXP2_REG_PGL_EXP_ROM2);
6167 if (CHIP_IS_E3(sc)) {
6168 tags_63_32 = REG_RD(sc, PGLUE_B_REG_TAGS_63_32);
6171 if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) &&
6172 ((port_is_idle_0 & 0x1) == 0x1) &&
6173 ((port_is_idle_1 & 0x1) == 0x1) &&
6174 (pgl_exp_rom2 == 0xffffffff) &&
6175 (!CHIP_IS_E3(sc) || (tags_63_32 == 0xffffffff)))
6178 } while (cnt-- > 0);
6182 "ERROR: Tetris buffer didn't get empty or there "
6183 "are still outstanding read requests after 1s! "
6184 "sr_cnt=0x%08x, blk_cnt=0x%08x, port_is_idle_0=0x%08x, "
6185 "port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x",
6186 sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1,
6193 /* Close gates #2, #3 and #4 */
6194 bnx2x_set_234_gates(sc, TRUE);
6196 /* Poll for IGU VQs for 57712 and newer chips */
6197 if (!CHIP_IS_E1x(sc) && bnx2x_er_poll_igu_vq(sc)) {
6201 /* clear "unprepared" bit */
6202 REG_WR(sc, MISC_REG_UNPREPARED, 0);
6205 /* Make sure all is written to the chip before the reset */
6209 * Wait for 1ms to empty GLUE and PCI-E core queues,
6210 * PSWHST, GRC and PSWRD Tetris buffer.
6214 /* Prepare to chip reset: */
6217 bnx2x_reset_mcp_prep(sc, &val);
6224 /* reset the chip */
6225 bnx2x_process_kill_chip_reset(sc, global);
6228 /* Recover after reset: */
6230 if (global && bnx2x_reset_mcp_comp(sc, val)) {
6234 /* Open the gates #2, #3 and #4 */
6235 bnx2x_set_234_gates(sc, FALSE);
6240 static int bnx2x_leader_reset(struct bnx2x_softc *sc)
6243 uint8_t global = bnx2x_reset_is_global(sc);
6247 * If not going to reset MCP, load "fake" driver to reset HW while
6248 * driver is owner of the HW.
6250 if (!global && !BNX2X_NOMCP(sc)) {
6251 load_code = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_REQ,
6252 DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
6254 PMD_DRV_LOG(NOTICE, "MCP response failure, aborting");
6256 goto exit_leader_reset;
6259 if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) &&
6260 (load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) {
6262 "MCP unexpected response, aborting");
6264 goto exit_leader_reset2;
6267 load_code = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
6269 PMD_DRV_LOG(NOTICE, "MCP response failure, aborting");
6271 goto exit_leader_reset2;
6275 /* try to recover after the failure */
6276 if (bnx2x_process_kill(sc, global)) {
6277 PMD_DRV_LOG(NOTICE, "Something bad occurred on engine %d!",
6280 goto exit_leader_reset2;
6284 * Clear the RESET_IN_PROGRESS and RESET_GLOBAL bits and update the driver
6287 bnx2x_set_reset_done(sc);
6289 bnx2x_clear_reset_global(sc);
6294 /* unload "fake driver" if it was loaded */
6295 if (!global &&!BNX2X_NOMCP(sc)) {
6296 bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
6297 bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, 0);
6303 bnx2x_release_leader_lock(sc);
6310 * prepare INIT transition, parameters configured:
6311 * - HC configuration
6312 * - Queue's CDU context
6315 bnx2x_pf_q_prep_init(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
6316 struct ecore_queue_init_params *init_params)
6319 int cxt_index, cxt_offset;
6321 bnx2x_set_bit(ECORE_Q_FLG_HC, &init_params->rx.flags);
6322 bnx2x_set_bit(ECORE_Q_FLG_HC, &init_params->tx.flags);
6324 bnx2x_set_bit(ECORE_Q_FLG_HC_EN, &init_params->rx.flags);
6325 bnx2x_set_bit(ECORE_Q_FLG_HC_EN, &init_params->tx.flags);
6328 init_params->rx.hc_rate =
6329 sc->hc_rx_ticks ? (1000000 / sc->hc_rx_ticks) : 0;
6330 init_params->tx.hc_rate =
6331 sc->hc_tx_ticks ? (1000000 / sc->hc_tx_ticks) : 0;
6334 init_params->rx.fw_sb_id = init_params->tx.fw_sb_id = fp->fw_sb_id;
6336 /* CQ index among the SB indices */
6337 init_params->rx.sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
6338 init_params->tx.sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS;
6340 /* set maximum number of COSs supported by this queue */
6341 init_params->max_cos = sc->max_cos;
6343 /* set the context pointers queue object */
6344 for (cos = FIRST_TX_COS_INDEX; cos < init_params->max_cos; cos++) {
6345 cxt_index = fp->index / ILT_PAGE_CIDS;
6346 cxt_offset = fp->index - (cxt_index * ILT_PAGE_CIDS);
6347 init_params->cxts[cos] =
6348 &sc->context[cxt_index].vcxt[cxt_offset].eth;
6352 /* set flags that are common for the Tx-only and not normal connections */
6353 static unsigned long
6354 bnx2x_get_common_flags(struct bnx2x_softc *sc, uint8_t zero_stats)
6356 unsigned long flags = 0;
6358 /* PF driver will always initialize the Queue to an ACTIVE state */
6359 bnx2x_set_bit(ECORE_Q_FLG_ACTIVE, &flags);
6362 * tx only connections collect statistics (on the same index as the
6363 * parent connection). The statistics are zeroed when the parent
6364 * connection is initialized.
6367 bnx2x_set_bit(ECORE_Q_FLG_STATS, &flags);
6369 bnx2x_set_bit(ECORE_Q_FLG_ZERO_STATS, &flags);
6373 * tx only connections can support tx-switching, though their
6374 * CoS-ness doesn't survive the loopback
6376 if (sc->flags & BNX2X_TX_SWITCHING) {
6377 bnx2x_set_bit(ECORE_Q_FLG_TX_SWITCH, &flags);
6380 bnx2x_set_bit(ECORE_Q_FLG_PCSUM_ON_PKT, &flags);
6385 static unsigned long bnx2x_get_q_flags(struct bnx2x_softc *sc, uint8_t leading)
6387 unsigned long flags = 0;
6390 bnx2x_set_bit(ECORE_Q_FLG_OV, &flags);
6394 bnx2x_set_bit(ECORE_Q_FLG_LEADING_RSS, &flags);
6395 bnx2x_set_bit(ECORE_Q_FLG_MCAST, &flags);
6398 bnx2x_set_bit(ECORE_Q_FLG_VLAN, &flags);
6400 /* merge with common flags */
6401 return flags | bnx2x_get_common_flags(sc, TRUE);
6405 bnx2x_pf_q_prep_general(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
6406 struct ecore_general_setup_params *gen_init, uint8_t cos)
6408 gen_init->stat_id = bnx2x_stats_id(fp);
6409 gen_init->spcl_id = fp->cl_id;
6410 gen_init->mtu = sc->mtu;
6411 gen_init->cos = cos;
6415 bnx2x_pf_rx_q_prep(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
6416 struct rxq_pause_params *pause,
6417 struct ecore_rxq_setup_params *rxq_init)
6419 struct bnx2x_rx_queue *rxq;
6421 rxq = sc->rx_queues[fp->index];
6423 PMD_RX_LOG(ERR, "RX queue is NULL");
6427 pause->bd_th_lo = BD_TH_LO(sc);
6428 pause->bd_th_hi = BD_TH_HI(sc);
6430 pause->rcq_th_lo = RCQ_TH_LO(sc);
6431 pause->rcq_th_hi = RCQ_TH_HI(sc);
6433 /* validate rings have enough entries to cross high thresholds */
6434 if (sc->dropless_fc &&
6435 pause->bd_th_hi + FW_PREFETCH_CNT > sc->rx_ring_size) {
6436 PMD_DRV_LOG(WARNING, "rx bd ring threshold limit");
6439 if (sc->dropless_fc &&
6440 pause->rcq_th_hi + FW_PREFETCH_CNT > USABLE_RCQ_ENTRIES(rxq)) {
6441 PMD_DRV_LOG(WARNING, "rcq ring threshold limit");
6447 rxq_init->dscr_map = (phys_addr_t)rxq->rx_ring_phys_addr;
6448 rxq_init->rcq_map = (phys_addr_t)rxq->cq_ring_phys_addr;
6449 rxq_init->rcq_np_map = (phys_addr_t)(rxq->cq_ring_phys_addr +
6453 * This should be a maximum number of data bytes that may be
6454 * placed on the BD (not including paddings).
6456 rxq_init->buf_sz = (fp->rx_buf_size - IP_HEADER_ALIGNMENT_PADDING);
6458 rxq_init->cl_qzone_id = fp->cl_qzone_id;
6459 rxq_init->rss_engine_id = SC_FUNC(sc);
6460 rxq_init->mcast_engine_id = SC_FUNC(sc);
6462 rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT;
6463 rxq_init->fw_sb_id = fp->fw_sb_id;
6465 rxq_init->sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
6468 * configure silent vlan removal
6469 * if multi function mode is afex, then mask default vlan
6471 if (IS_MF_AFEX(sc)) {
6472 rxq_init->silent_removal_value =
6473 sc->devinfo.mf_info.afex_def_vlan_tag;
6474 rxq_init->silent_removal_mask = EVL_VLID_MASK;
6479 bnx2x_pf_tx_q_prep(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
6480 struct ecore_txq_setup_params *txq_init, uint8_t cos)
6482 struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
6485 PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
6488 txq_init->dscr_map = (phys_addr_t)txq->tx_ring_phys_addr;
6489 txq_init->sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS + cos;
6490 txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW;
6491 txq_init->fw_sb_id = fp->fw_sb_id;
6494 * set the TSS leading client id for TX classfication to the
6495 * leading RSS client id
6497 txq_init->tss_leading_cl_id = BNX2X_FP(sc, 0, cl_id);
6501 * This function performs 2 steps in a queue state machine:
6506 bnx2x_setup_queue(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp, uint8_t leading)
6508 struct ecore_queue_state_params q_params = { NULL };
6509 struct ecore_queue_setup_params *setup_params = &q_params.params.setup;
6512 PMD_DRV_LOG(DEBUG, "setting up queue %d", fp->index);
6514 bnx2x_ack_sb(sc, fp->igu_sb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
6516 q_params.q_obj = &BNX2X_SP_OBJ(sc, fp).q_obj;
6518 /* we want to wait for completion in this context */
6519 bnx2x_set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
6521 /* prepare the INIT parameters */
6522 bnx2x_pf_q_prep_init(sc, fp, &q_params.params.init);
6524 /* Set the command */
6525 q_params.cmd = ECORE_Q_CMD_INIT;
6527 /* Change the state to INIT */
6528 rc = ecore_queue_state_change(sc, &q_params);
6530 PMD_DRV_LOG(NOTICE, "Queue(%d) INIT failed", fp->index);
6534 PMD_DRV_LOG(DEBUG, "init complete");
6536 /* now move the Queue to the SETUP state */
6537 memset(setup_params, 0, sizeof(*setup_params));
6539 /* set Queue flags */
6540 setup_params->flags = bnx2x_get_q_flags(sc, leading);
6542 /* set general SETUP parameters */
6543 bnx2x_pf_q_prep_general(sc, fp, &setup_params->gen_params,
6544 FIRST_TX_COS_INDEX);
6546 bnx2x_pf_rx_q_prep(sc, fp,
6547 &setup_params->pause_params,
6548 &setup_params->rxq_params);
6550 bnx2x_pf_tx_q_prep(sc, fp, &setup_params->txq_params, FIRST_TX_COS_INDEX);
6552 /* Set the command */
6553 q_params.cmd = ECORE_Q_CMD_SETUP;
6555 /* change the state to SETUP */
6556 rc = ecore_queue_state_change(sc, &q_params);
6558 PMD_DRV_LOG(NOTICE, "Queue(%d) SETUP failed", fp->index);
6565 static int bnx2x_setup_leading(struct bnx2x_softc *sc)
6568 return bnx2x_setup_queue(sc, &sc->fp[0], TRUE);
6570 return bnx2x_vf_setup_queue(sc, &sc->fp[0], TRUE);
6574 bnx2x_config_rss_pf(struct bnx2x_softc *sc, struct ecore_rss_config_obj *rss_obj,
6575 uint8_t config_hash)
6577 struct ecore_config_rss_params params = { NULL };
6581 * Although RSS is meaningless when there is a single HW queue we
6582 * still need it enabled in order to have HW Rx hash generated.
6585 params.rss_obj = rss_obj;
6587 bnx2x_set_bit(RAMROD_COMP_WAIT, ¶ms.ramrod_flags);
6589 bnx2x_set_bit(ECORE_RSS_MODE_REGULAR, ¶ms.rss_flags);
6591 /* RSS configuration */
6592 bnx2x_set_bit(ECORE_RSS_IPV4, ¶ms.rss_flags);
6593 bnx2x_set_bit(ECORE_RSS_IPV4_TCP, ¶ms.rss_flags);
6594 bnx2x_set_bit(ECORE_RSS_IPV6, ¶ms.rss_flags);
6595 bnx2x_set_bit(ECORE_RSS_IPV6_TCP, ¶ms.rss_flags);
6596 if (rss_obj->udp_rss_v4) {
6597 bnx2x_set_bit(ECORE_RSS_IPV4_UDP, ¶ms.rss_flags);
6599 if (rss_obj->udp_rss_v6) {
6600 bnx2x_set_bit(ECORE_RSS_IPV6_UDP, ¶ms.rss_flags);
6604 params.rss_result_mask = MULTI_MASK;
6606 (void)rte_memcpy(params.ind_table, rss_obj->ind_table,
6607 sizeof(params.ind_table));
6611 for (i = 0; i < sizeof(params.rss_key) / 4; i++) {
6612 params.rss_key[i] = (uint32_t) rte_rand();
6615 bnx2x_set_bit(ECORE_RSS_SET_SRCH, ¶ms.rss_flags);
6619 return ecore_config_rss(sc, ¶ms);
6621 return bnx2x_vf_config_rss(sc, ¶ms);
6624 static int bnx2x_config_rss_eth(struct bnx2x_softc *sc, uint8_t config_hash)
6626 return bnx2x_config_rss_pf(sc, &sc->rss_conf_obj, config_hash);
6629 static int bnx2x_init_rss_pf(struct bnx2x_softc *sc)
6631 uint8_t num_eth_queues = BNX2X_NUM_ETH_QUEUES(sc);
6635 * Prepare the initial contents of the indirection table if
6638 for (i = 0; i < sizeof(sc->rss_conf_obj.ind_table); i++) {
6639 sc->rss_conf_obj.ind_table[i] =
6640 (sc->fp->cl_id + (i % num_eth_queues));
6644 sc->rss_conf_obj.udp_rss_v4 = sc->rss_conf_obj.udp_rss_v6 = 1;
6648 * For 57711 SEARCHER configuration (rss_keys) is
6649 * per-port, so if explicit configuration is needed, do it only
6652 * For 57712 and newer it's a per-function configuration.
6654 return bnx2x_config_rss_eth(sc, sc->port.pmf || !CHIP_IS_E1x(sc));
6658 bnx2x_set_mac_one(struct bnx2x_softc *sc, uint8_t * mac,
6659 struct ecore_vlan_mac_obj *obj, uint8_t set, int mac_type,
6660 unsigned long *ramrod_flags)
6662 struct ecore_vlan_mac_ramrod_params ramrod_param;
6665 memset(&ramrod_param, 0, sizeof(ramrod_param));
6667 /* fill in general parameters */
6668 ramrod_param.vlan_mac_obj = obj;
6669 ramrod_param.ramrod_flags = *ramrod_flags;
6671 /* fill a user request section if needed */
6672 if (!bnx2x_test_bit(RAMROD_CONT, ramrod_flags)) {
6673 (void)rte_memcpy(ramrod_param.user_req.u.mac.mac, mac,
6676 bnx2x_set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags);
6678 /* Set the command: ADD or DEL */
6679 ramrod_param.user_req.cmd = (set) ? ECORE_VLAN_MAC_ADD :
6683 rc = ecore_config_vlan_mac(sc, &ramrod_param);
6685 if (rc == ECORE_EXISTS) {
6686 PMD_DRV_LOG(INFO, "Failed to schedule ADD operations (EEXIST)");
6687 /* do not treat adding same MAC as error */
6689 } else if (rc < 0) {
6691 "%s MAC failed (%d)", (set ? "Set" : "Delete"), rc);
6697 static int bnx2x_set_eth_mac(struct bnx2x_softc *sc, uint8_t set)
6699 unsigned long ramrod_flags = 0;
6701 PMD_DRV_LOG(DEBUG, "Adding Ethernet MAC");
6703 bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
6705 /* Eth MAC is set on RSS leading client (fp[0]) */
6706 return bnx2x_set_mac_one(sc, sc->link_params.mac_addr,
6707 &sc->sp_objs->mac_obj,
6708 set, ECORE_ETH_MAC, &ramrod_flags);
6711 static int bnx2x_get_cur_phy_idx(struct bnx2x_softc *sc)
6713 uint32_t sel_phy_idx = 0;
6715 if (sc->link_params.num_phys <= 1) {
6716 return ELINK_INT_PHY;
6719 if (sc->link_vars.link_up) {
6720 sel_phy_idx = ELINK_EXT_PHY1;
6721 /* In case link is SERDES, check if the ELINK_EXT_PHY2 is the one */
6722 if ((sc->link_vars.link_status & LINK_STATUS_SERDES_LINK) &&
6723 (sc->link_params.phy[ELINK_EXT_PHY2].supported &
6724 ELINK_SUPPORTED_FIBRE))
6725 sel_phy_idx = ELINK_EXT_PHY2;
6727 switch (elink_phy_selection(&sc->link_params)) {
6728 case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
6729 case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
6730 case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
6731 sel_phy_idx = ELINK_EXT_PHY1;
6733 case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
6734 case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
6735 sel_phy_idx = ELINK_EXT_PHY2;
6743 static int bnx2x_get_link_cfg_idx(struct bnx2x_softc *sc)
6745 uint32_t sel_phy_idx = bnx2x_get_cur_phy_idx(sc);
6748 * The selected activated PHY is always after swapping (in case PHY
6749 * swapping is enabled). So when swapping is enabled, we need to reverse
6753 if (sc->link_params.multi_phy_config & PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
6754 if (sel_phy_idx == ELINK_EXT_PHY1)
6755 sel_phy_idx = ELINK_EXT_PHY2;
6756 else if (sel_phy_idx == ELINK_EXT_PHY2)
6757 sel_phy_idx = ELINK_EXT_PHY1;
6760 return ELINK_LINK_CONFIG_IDX(sel_phy_idx);
6763 static void bnx2x_set_requested_fc(struct bnx2x_softc *sc)
6766 * Initialize link parameters structure variables
6767 * It is recommended to turn off RX FC for jumbo frames
6768 * for better performance
6770 if (CHIP_IS_E1x(sc) && (sc->mtu > 5000)) {
6771 sc->link_params.req_fc_auto_adv = ELINK_FLOW_CTRL_TX;
6773 sc->link_params.req_fc_auto_adv = ELINK_FLOW_CTRL_BOTH;
6777 static void bnx2x_calc_fc_adv(struct bnx2x_softc *sc)
6779 uint8_t cfg_idx = bnx2x_get_link_cfg_idx(sc);
6780 switch (sc->link_vars.ieee_fc &
6781 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
6782 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
6784 sc->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
6788 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
6789 sc->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause |
6793 case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
6794 sc->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause;
6799 static uint16_t bnx2x_get_mf_speed(struct bnx2x_softc *sc)
6801 uint16_t line_speed = sc->link_vars.line_speed;
6803 uint16_t maxCfg = bnx2x_extract_max_cfg(sc,
6805 mf_info.mf_config[SC_VN
6808 /* calculate the current MAX line speed limit for the MF devices */
6810 line_speed = (line_speed * maxCfg) / 100;
6811 } else { /* SD mode */
6812 uint16_t vn_max_rate = maxCfg * 100;
6814 if (vn_max_rate < line_speed) {
6815 line_speed = vn_max_rate;
6824 bnx2x_fill_report_data(struct bnx2x_softc *sc, struct bnx2x_link_report_data *data)
6826 uint16_t line_speed = bnx2x_get_mf_speed(sc);
6828 memset(data, 0, sizeof(*data));
6830 /* fill the report data with the effective line speed */
6831 data->line_speed = line_speed;
6834 if (!sc->link_vars.link_up || (sc->flags & BNX2X_MF_FUNC_DIS)) {
6835 bnx2x_set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
6836 &data->link_report_flags);
6840 if (sc->link_vars.duplex == DUPLEX_FULL) {
6841 bnx2x_set_bit(BNX2X_LINK_REPORT_FULL_DUPLEX,
6842 &data->link_report_flags);
6845 /* Rx Flow Control is ON */
6846 if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_RX) {
6847 bnx2x_set_bit(BNX2X_LINK_REPORT_RX_FC_ON, &data->link_report_flags);
6850 /* Tx Flow Control is ON */
6851 if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_TX) {
6852 bnx2x_set_bit(BNX2X_LINK_REPORT_TX_FC_ON, &data->link_report_flags);
6856 /* report link status to OS, should be called under phy_lock */
6857 static void bnx2x_link_report(struct bnx2x_softc *sc)
6859 struct bnx2x_link_report_data cur_data;
6863 bnx2x_read_mf_cfg(sc);
6866 /* Read the current link report info */
6867 bnx2x_fill_report_data(sc, &cur_data);
6869 /* Don't report link down or exactly the same link status twice */
6870 if (!memcmp(&cur_data, &sc->last_reported_link, sizeof(cur_data)) ||
6871 (bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
6872 &sc->last_reported_link.link_report_flags) &&
6873 bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
6874 &cur_data.link_report_flags))) {
6880 /* report new link params and remember the state for the next time */
6881 (void)rte_memcpy(&sc->last_reported_link, &cur_data, sizeof(cur_data));
6883 if (bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
6884 &cur_data.link_report_flags)) {
6885 PMD_DRV_LOG(INFO, "NIC Link is Down");
6887 __rte_unused const char *duplex;
6888 __rte_unused const char *flow;
6890 if (bnx2x_test_and_clear_bit(BNX2X_LINK_REPORT_FULL_DUPLEX,
6891 &cur_data.link_report_flags)) {
6898 * Handle the FC at the end so that only these flags would be
6899 * possibly set. This way we may easily check if there is no FC
6902 if (cur_data.link_report_flags) {
6903 if (bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
6904 &cur_data.link_report_flags) &&
6905 bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
6906 &cur_data.link_report_flags)) {
6907 flow = "ON - receive & transmit";
6908 } else if (bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
6909 &cur_data.link_report_flags) &&
6910 !bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
6911 &cur_data.link_report_flags)) {
6912 flow = "ON - receive";
6913 } else if (!bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
6914 &cur_data.link_report_flags) &&
6915 bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
6916 &cur_data.link_report_flags)) {
6917 flow = "ON - transmit";
6919 flow = "none"; /* possible? */
6926 "NIC Link is Up, %d Mbps %s duplex, Flow control: %s",
6927 cur_data.line_speed, duplex, flow);
6931 void bnx2x_link_status_update(struct bnx2x_softc *sc)
6933 if (sc->state != BNX2X_STATE_OPEN) {
6937 if (IS_PF(sc) && !CHIP_REV_IS_SLOW(sc)) {
6938 elink_link_status_update(&sc->link_params, &sc->link_vars);
6940 sc->port.supported[0] |= (ELINK_SUPPORTED_10baseT_Half |
6941 ELINK_SUPPORTED_10baseT_Full |
6942 ELINK_SUPPORTED_100baseT_Half |
6943 ELINK_SUPPORTED_100baseT_Full |
6944 ELINK_SUPPORTED_1000baseT_Full |
6945 ELINK_SUPPORTED_2500baseX_Full |
6946 ELINK_SUPPORTED_10000baseT_Full |
6947 ELINK_SUPPORTED_TP |
6948 ELINK_SUPPORTED_FIBRE |
6949 ELINK_SUPPORTED_Autoneg |
6950 ELINK_SUPPORTED_Pause |
6951 ELINK_SUPPORTED_Asym_Pause);
6952 sc->port.advertising[0] = sc->port.supported[0];
6954 sc->link_params.sc = sc;
6955 sc->link_params.port = SC_PORT(sc);
6956 sc->link_params.req_duplex[0] = DUPLEX_FULL;
6957 sc->link_params.req_flow_ctrl[0] = ELINK_FLOW_CTRL_NONE;
6958 sc->link_params.req_line_speed[0] = SPEED_10000;
6959 sc->link_params.speed_cap_mask[0] = 0x7f0000;
6960 sc->link_params.switch_cfg = ELINK_SWITCH_CFG_10G;
6962 if (CHIP_REV_IS_FPGA(sc)) {
6963 sc->link_vars.mac_type = ELINK_MAC_TYPE_EMAC;
6964 sc->link_vars.line_speed = ELINK_SPEED_1000;
6965 sc->link_vars.link_status = (LINK_STATUS_LINK_UP |
6966 LINK_STATUS_SPEED_AND_DUPLEX_1000TFD);
6968 sc->link_vars.mac_type = ELINK_MAC_TYPE_BMAC;
6969 sc->link_vars.line_speed = ELINK_SPEED_10000;
6970 sc->link_vars.link_status = (LINK_STATUS_LINK_UP |
6971 LINK_STATUS_SPEED_AND_DUPLEX_10GTFD);
6974 sc->link_vars.link_up = 1;
6976 sc->link_vars.duplex = DUPLEX_FULL;
6977 sc->link_vars.flow_ctrl = ELINK_FLOW_CTRL_NONE;
6981 NIG_REG_EGRESS_DRAIN0_MODE +
6982 sc->link_params.port * 4, 0);
6983 bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
6984 bnx2x_link_report(sc);
6989 if (sc->link_vars.link_up) {
6990 bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
6992 bnx2x_stats_handle(sc, STATS_EVENT_STOP);
6994 bnx2x_link_report(sc);
6996 bnx2x_link_report(sc);
6997 bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
7001 static void bnx2x_periodic_start(struct bnx2x_softc *sc)
7003 atomic_store_rel_long(&sc->periodic_flags, PERIODIC_GO);
7006 static void bnx2x_periodic_stop(struct bnx2x_softc *sc)
7008 atomic_store_rel_long(&sc->periodic_flags, PERIODIC_STOP);
7011 static int bnx2x_initial_phy_init(struct bnx2x_softc *sc, int load_mode)
7013 int rc, cfg_idx = bnx2x_get_link_cfg_idx(sc);
7014 uint16_t req_line_speed = sc->link_params.req_line_speed[cfg_idx];
7015 struct elink_params *lp = &sc->link_params;
7017 bnx2x_set_requested_fc(sc);
7019 if (load_mode == LOAD_DIAG) {
7020 lp->loopback_mode = ELINK_LOOPBACK_XGXS;
7021 /* Prefer doing PHY loopback at 10G speed, if possible */
7022 if (lp->req_line_speed[cfg_idx] < ELINK_SPEED_10000) {
7023 if (lp->speed_cap_mask[cfg_idx] &
7024 PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
7025 lp->req_line_speed[cfg_idx] = ELINK_SPEED_10000;
7027 lp->req_line_speed[cfg_idx] = ELINK_SPEED_1000;
7032 if (load_mode == LOAD_LOOPBACK_EXT) {
7033 lp->loopback_mode = ELINK_LOOPBACK_EXT;
7036 rc = elink_phy_init(&sc->link_params, &sc->link_vars);
7038 bnx2x_calc_fc_adv(sc);
7040 if (sc->link_vars.link_up) {
7041 bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
7042 bnx2x_link_report(sc);
7045 if (!CHIP_REV_IS_SLOW(sc)) {
7046 bnx2x_periodic_start(sc);
7049 sc->link_params.req_line_speed[cfg_idx] = req_line_speed;
7053 /* update flags in shmem */
7055 bnx2x_update_drv_flags(struct bnx2x_softc *sc, uint32_t flags, uint32_t set)
7059 if (SHMEM2_HAS(sc, drv_flags)) {
7060 bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_DRV_FLAGS);
7061 drv_flags = SHMEM2_RD(sc, drv_flags);
7066 drv_flags &= ~flags;
7069 SHMEM2_WR(sc, drv_flags, drv_flags);
7071 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_DRV_FLAGS);
7075 /* periodic timer callout routine, only runs when the interface is up */
7076 void bnx2x_periodic_callout(struct bnx2x_softc *sc)
7078 if ((sc->state != BNX2X_STATE_OPEN) ||
7079 (atomic_load_acq_long(&sc->periodic_flags) == PERIODIC_STOP)) {
7080 PMD_DRV_LOG(WARNING, "periodic callout exit (state=0x%x)",
7084 if (!CHIP_REV_IS_SLOW(sc)) {
7086 * This barrier is needed to ensure the ordering between the writing
7087 * to the sc->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and
7092 elink_period_func(&sc->link_params, &sc->link_vars);
7096 if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
7097 int mb_idx = SC_FW_MB_IDX(sc);
7101 ++sc->fw_drv_pulse_wr_seq;
7102 sc->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
7104 drv_pulse = sc->fw_drv_pulse_wr_seq;
7105 bnx2x_drv_pulse(sc);
7107 mcp_pulse = (SHMEM_RD(sc, func_mb[mb_idx].mcp_pulse_mb) &
7108 MCP_PULSE_SEQ_MASK);
7111 * The delta between driver pulse and mcp response should
7112 * be 1 (before mcp response) or 0 (after mcp response).
7114 if ((drv_pulse != mcp_pulse) &&
7115 (drv_pulse != ((mcp_pulse + 1) & MCP_PULSE_SEQ_MASK))) {
7116 /* someone lost a heartbeat... */
7118 "drv_pulse (0x%x) != mcp_pulse (0x%x)",
7119 drv_pulse, mcp_pulse);
7125 /* start the controller */
7126 static __attribute__ ((noinline))
7127 int bnx2x_nic_load(struct bnx2x_softc *sc)
7130 uint32_t load_code = 0;
7133 PMD_INIT_FUNC_TRACE();
7135 sc->state = BNX2X_STATE_OPENING_WAITING_LOAD;
7138 /* must be called before memory allocation and HW init */
7139 bnx2x_ilt_set_info(sc);
7142 bnx2x_set_fp_rx_buf_size(sc);
7145 if (bnx2x_alloc_mem(sc) != 0) {
7146 sc->state = BNX2X_STATE_CLOSED;
7148 goto bnx2x_nic_load_error0;
7152 if (bnx2x_alloc_fw_stats_mem(sc) != 0) {
7153 sc->state = BNX2X_STATE_CLOSED;
7155 goto bnx2x_nic_load_error0;
7159 rc = bnx2x_vf_init(sc);
7161 sc->state = BNX2X_STATE_ERROR;
7162 goto bnx2x_nic_load_error0;
7167 /* set pf load just before approaching the MCP */
7168 bnx2x_set_pf_load(sc);
7170 /* if MCP exists send load request and analyze response */
7171 if (!BNX2X_NOMCP(sc)) {
7172 /* attempt to load pf */
7173 if (bnx2x_nic_load_request(sc, &load_code) != 0) {
7174 sc->state = BNX2X_STATE_CLOSED;
7176 goto bnx2x_nic_load_error1;
7179 /* what did the MCP say? */
7180 if (bnx2x_nic_load_analyze_req(sc, load_code) != 0) {
7181 bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
7182 sc->state = BNX2X_STATE_CLOSED;
7184 goto bnx2x_nic_load_error2;
7187 PMD_DRV_LOG(INFO, "Device has no MCP!");
7188 load_code = bnx2x_nic_load_no_mcp(sc);
7191 /* mark PMF if applicable */
7192 bnx2x_nic_load_pmf(sc, load_code);
7194 /* Init Function state controlling object */
7195 bnx2x_init_func_obj(sc);
7198 if (bnx2x_init_hw(sc, load_code) != 0) {
7199 PMD_DRV_LOG(NOTICE, "HW init failed");
7200 bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
7201 sc->state = BNX2X_STATE_CLOSED;
7203 goto bnx2x_nic_load_error2;
7207 bnx2x_nic_init(sc, load_code);
7209 /* Init per-function objects */
7211 bnx2x_init_objs(sc);
7213 /* set AFEX default VLAN tag to an invalid value */
7214 sc->devinfo.mf_info.afex_def_vlan_tag = -1;
7216 sc->state = BNX2X_STATE_OPENING_WAITING_PORT;
7217 rc = bnx2x_func_start(sc);
7219 PMD_DRV_LOG(NOTICE, "Function start failed!");
7220 bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
7221 sc->state = BNX2X_STATE_ERROR;
7222 goto bnx2x_nic_load_error3;
7225 /* send LOAD_DONE command to MCP */
7226 if (!BNX2X_NOMCP(sc)) {
7228 bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
7231 "MCP response failure, aborting");
7232 sc->state = BNX2X_STATE_ERROR;
7234 goto bnx2x_nic_load_error3;
7239 rc = bnx2x_setup_leading(sc);
7241 PMD_DRV_LOG(NOTICE, "Setup leading failed!");
7242 sc->state = BNX2X_STATE_ERROR;
7243 goto bnx2x_nic_load_error3;
7246 FOR_EACH_NONDEFAULT_ETH_QUEUE(sc, i) {
7248 rc = bnx2x_setup_queue(sc, &sc->fp[i], FALSE);
7249 else /* IS_VF(sc) */
7250 rc = bnx2x_vf_setup_queue(sc, &sc->fp[i], FALSE);
7253 PMD_DRV_LOG(NOTICE, "Queue(%d) setup failed", i);
7254 sc->state = BNX2X_STATE_ERROR;
7255 goto bnx2x_nic_load_error3;
7259 rc = bnx2x_init_rss_pf(sc);
7261 PMD_DRV_LOG(NOTICE, "PF RSS init failed");
7262 sc->state = BNX2X_STATE_ERROR;
7263 goto bnx2x_nic_load_error3;
7266 /* now when Clients are configured we are ready to work */
7267 sc->state = BNX2X_STATE_OPEN;
7269 /* Configure a ucast MAC */
7271 rc = bnx2x_set_eth_mac(sc, TRUE);
7272 } else { /* IS_VF(sc) */
7273 rc = bnx2x_vf_set_mac(sc, TRUE);
7277 PMD_DRV_LOG(NOTICE, "Setting Ethernet MAC failed");
7278 sc->state = BNX2X_STATE_ERROR;
7279 goto bnx2x_nic_load_error3;
7283 rc = bnx2x_initial_phy_init(sc, LOAD_OPEN);
7285 sc->state = BNX2X_STATE_ERROR;
7286 goto bnx2x_nic_load_error3;
7290 sc->link_params.feature_config_flags &=
7291 ~ELINK_FEATURE_CONFIG_BOOT_FROM_SAN;
7294 switch (LOAD_OPEN) {
7300 case LOAD_LOOPBACK_EXT:
7301 sc->state = BNX2X_STATE_DIAG;
7309 bnx2x_update_drv_flags(sc, 1 << DRV_FLAGS_PORT_MASK, 0);
7311 bnx2x_link_status_update(sc);
7314 if (IS_PF(sc) && SHMEM2_HAS(sc, drv_capabilities_flag)) {
7315 /* mark driver is loaded in shmem2 */
7316 val = SHMEM2_RD(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)]);
7317 SHMEM2_WR(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)],
7319 DRV_FLAGS_CAPABILITIES_LOADED_SUPPORTED |
7320 DRV_FLAGS_CAPABILITIES_LOADED_L2));
7323 /* start fast path */
7324 /* Initialize Rx filter */
7325 bnx2x_set_rx_mode(sc);
7327 /* wait for all pending SP commands to complete */
7328 if (IS_PF(sc) && !bnx2x_wait_sp_comp(sc, ~0x0UL)) {
7329 PMD_DRV_LOG(NOTICE, "Timeout waiting for all SPs to complete!");
7330 bnx2x_periodic_stop(sc);
7331 bnx2x_nic_unload(sc, UNLOAD_CLOSE, FALSE);
7335 PMD_DRV_LOG(DEBUG, "NIC successfully loaded");
7339 bnx2x_nic_load_error3:
7342 bnx2x_int_disable_sync(sc, 1);
7344 /* clean out queued objects */
7345 bnx2x_squeeze_objects(sc);
7348 bnx2x_nic_load_error2:
7350 if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
7351 bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
7352 bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, 0);
7357 bnx2x_nic_load_error1:
7359 /* clear pf_load status, as it was already set */
7361 bnx2x_clear_pf_load(sc);
7364 bnx2x_nic_load_error0:
7366 bnx2x_free_fw_stats_mem(sc);
7373 * Handles controller initialization.
7375 int bnx2x_init(struct bnx2x_softc *sc)
7377 int other_engine = SC_PATH(sc) ? 0 : 1;
7378 uint8_t other_load_status, load_status;
7379 uint8_t global = FALSE;
7382 /* Check if the driver is still running and bail out if it is. */
7383 if (sc->state != BNX2X_STATE_CLOSED) {
7384 PMD_DRV_LOG(DEBUG, "Init called while driver is running!");
7386 goto bnx2x_init_done;
7389 bnx2x_set_power_state(sc, PCI_PM_D0);
7392 * If parity occurred during the unload, then attentions and/or
7393 * RECOVERY_IN_PROGRESS may still be set. If so we want the first function
7394 * loaded on the current engine to complete the recovery. Parity recovery
7395 * is only relevant for PF driver.
7398 other_load_status = bnx2x_get_load_status(sc, other_engine);
7399 load_status = bnx2x_get_load_status(sc, SC_PATH(sc));
7401 if (!bnx2x_reset_is_done(sc, SC_PATH(sc)) ||
7402 bnx2x_chk_parity_attn(sc, &global, TRUE)) {
7405 * If there are attentions and they are in global blocks, set
7406 * the GLOBAL_RESET bit regardless whether it will be this
7407 * function that will complete the recovery or not.
7410 bnx2x_set_reset_global(sc);
7414 * Only the first function on the current engine should try
7415 * to recover in open. In case of attentions in global blocks
7416 * only the first in the chip should try to recover.
7419 && (!global ||!other_load_status))
7420 && bnx2x_trylock_leader_lock(sc)
7421 && !bnx2x_leader_reset(sc)) {
7423 "Recovered during init");
7427 /* recovery has failed... */
7428 bnx2x_set_power_state(sc, PCI_PM_D3hot);
7430 sc->recovery_state = BNX2X_RECOVERY_FAILED;
7433 "Recovery flow hasn't properly "
7434 "completed yet, try again later. "
7435 "If you still see this message after a "
7436 "few retries then power cycle is required.");
7439 goto bnx2x_init_done;
7444 sc->recovery_state = BNX2X_RECOVERY_DONE;
7446 rc = bnx2x_nic_load(sc);
7451 PMD_DRV_LOG(NOTICE, "Initialization failed, "
7452 "stack notified driver is NOT running!");
7458 static void bnx2x_get_function_num(struct bnx2x_softc *sc)
7463 * Read the ME register to get the function number. The ME register
7464 * holds the relative-function number and absolute-function number. The
7465 * absolute-function number appears only in E2 and above. Before that
7466 * these bits always contained zero, therefore we cannot blindly use them.
7469 val = REG_RD(sc, BAR_ME_REGISTER);
7472 (uint8_t) ((val & ME_REG_PF_NUM) >> ME_REG_PF_NUM_SHIFT);
7474 (uint8_t) ((val & ME_REG_ABS_PF_NUM) >> ME_REG_ABS_PF_NUM_SHIFT) &
7477 if (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) {
7478 sc->pfunc_abs = ((sc->pfunc_rel << 1) | sc->path_id);
7480 sc->pfunc_abs = (sc->pfunc_rel | sc->path_id);
7484 "Relative function %d, Absolute function %d, Path %d",
7485 sc->pfunc_rel, sc->pfunc_abs, sc->path_id);
7488 static uint32_t bnx2x_get_shmem_mf_cfg_base(struct bnx2x_softc *sc)
7490 uint32_t shmem2_size;
7492 uint32_t mf_cfg_offset_value;
7495 offset = (SHMEM_ADDR(sc, func_mb) +
7496 (MAX_FUNC_NUM * sizeof(struct drv_func_mb)));
7499 if (sc->devinfo.shmem2_base != 0) {
7500 shmem2_size = SHMEM2_RD(sc, size);
7501 if (shmem2_size > offsetof(struct shmem2_region, mf_cfg_addr)) {
7502 mf_cfg_offset_value = SHMEM2_RD(sc, mf_cfg_addr);
7503 if (SHMEM_MF_CFG_ADDR_NONE != mf_cfg_offset_value) {
7504 offset = mf_cfg_offset_value;
7512 static uint32_t bnx2x_pcie_capability_read(struct bnx2x_softc *sc, int reg)
7515 struct bnx2x_pci_cap *caps;
7517 /* ensure PCIe capability is enabled */
7518 caps = pci_find_cap(sc, PCIY_EXPRESS, BNX2X_PCI_CAP);
7520 PMD_DRV_LOG(DEBUG, "Found PCIe capability: "
7521 "id=0x%04X type=0x%04X addr=0x%08X",
7522 caps->id, caps->type, caps->addr);
7523 pci_read(sc, (caps->addr + reg), &ret, 2);
7527 PMD_DRV_LOG(WARNING, "PCIe capability NOT FOUND!!!");
7532 static uint8_t bnx2x_is_pcie_pending(struct bnx2x_softc *sc)
7534 return bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_DEVICE_STA) &
7535 PCIM_EXP_STA_TRANSACTION_PND;
7539 * Walk the PCI capabiites list for the device to find what features are
7540 * supported. These capabilites may be enabled/disabled by firmware so it's
7541 * best to walk the list rather than make assumptions.
7543 static void bnx2x_probe_pci_caps(struct bnx2x_softc *sc)
7545 PMD_INIT_FUNC_TRACE();
7547 struct bnx2x_pci_cap *caps;
7548 uint16_t link_status;
7549 #ifdef RTE_LIBRTE_BNX2X_DEBUG
7553 /* check if PCI Power Management is enabled */
7554 caps = pci_find_cap(sc, PCIY_PMG, BNX2X_PCI_CAP);
7556 PMD_DRV_LOG(DEBUG, "Found PM capability: "
7557 "id=0x%04X type=0x%04X addr=0x%08X",
7558 caps->id, caps->type, caps->addr);
7560 sc->devinfo.pcie_cap_flags |= BNX2X_PM_CAPABLE_FLAG;
7561 sc->devinfo.pcie_pm_cap_reg = caps->addr;
7564 link_status = bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_LINK_STA);
7566 sc->devinfo.pcie_link_speed = (link_status & PCIM_LINK_STA_SPEED);
7567 sc->devinfo.pcie_link_width =
7568 ((link_status & PCIM_LINK_STA_WIDTH) >> 4);
7570 PMD_DRV_LOG(DEBUG, "PCIe link speed=%d width=%d",
7571 sc->devinfo.pcie_link_speed, sc->devinfo.pcie_link_width);
7573 sc->devinfo.pcie_cap_flags |= BNX2X_PCIE_CAPABLE_FLAG;
7575 /* check if MSI capability is enabled */
7576 caps = pci_find_cap(sc, PCIY_MSI, BNX2X_PCI_CAP);
7578 PMD_DRV_LOG(DEBUG, "Found MSI capability at 0x%04x", reg);
7580 sc->devinfo.pcie_cap_flags |= BNX2X_MSI_CAPABLE_FLAG;
7581 sc->devinfo.pcie_msi_cap_reg = caps->addr;
7584 /* check if MSI-X capability is enabled */
7585 caps = pci_find_cap(sc, PCIY_MSIX, BNX2X_PCI_CAP);
7587 PMD_DRV_LOG(DEBUG, "Found MSI-X capability at 0x%04x", reg);
7589 sc->devinfo.pcie_cap_flags |= BNX2X_MSIX_CAPABLE_FLAG;
7590 sc->devinfo.pcie_msix_cap_reg = caps->addr;
7594 static int bnx2x_get_shmem_mf_cfg_info_sd(struct bnx2x_softc *sc)
7596 struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
7599 /* get the outer vlan if we're in switch-dependent mode */
7601 val = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
7602 mf_info->ext_id = (uint16_t) val;
7604 mf_info->multi_vnics_mode = 1;
7606 if (!VALID_OVLAN(mf_info->ext_id)) {
7607 PMD_DRV_LOG(NOTICE, "Invalid VLAN (%d)", mf_info->ext_id);
7611 /* get the capabilities */
7612 if ((mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_PROTOCOL_MASK) ==
7613 FUNC_MF_CFG_PROTOCOL_ISCSI) {
7614 mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_ISCSI;
7615 } else if ((mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_PROTOCOL_MASK)
7616 == FUNC_MF_CFG_PROTOCOL_FCOE) {
7617 mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_FCOE;
7619 mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_ETHERNET;
7622 mf_info->vnics_per_port =
7623 (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
7628 static uint32_t bnx2x_get_shmem_ext_proto_support_flags(struct bnx2x_softc *sc)
7630 uint32_t retval = 0;
7633 val = MFCFG_RD(sc, func_ext_config[SC_ABS_FUNC(sc)].func_cfg);
7635 if (val & MACP_FUNC_CFG_FLAGS_ENABLED) {
7636 if (val & MACP_FUNC_CFG_FLAGS_ETHERNET) {
7637 retval |= MF_PROTO_SUPPORT_ETHERNET;
7639 if (val & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) {
7640 retval |= MF_PROTO_SUPPORT_ISCSI;
7642 if (val & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) {
7643 retval |= MF_PROTO_SUPPORT_FCOE;
7650 static int bnx2x_get_shmem_mf_cfg_info_si(struct bnx2x_softc *sc)
7652 struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
7656 * There is no outer vlan if we're in switch-independent mode.
7657 * If the mac is valid then assume multi-function.
7660 val = MFCFG_RD(sc, func_ext_config[SC_ABS_FUNC(sc)].func_cfg);
7662 mf_info->multi_vnics_mode = ((val & MACP_FUNC_CFG_FLAGS_MASK) != 0);
7664 mf_info->mf_protos_supported =
7665 bnx2x_get_shmem_ext_proto_support_flags(sc);
7667 mf_info->vnics_per_port =
7668 (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
7673 static int bnx2x_get_shmem_mf_cfg_info_niv(struct bnx2x_softc *sc)
7675 struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
7677 uint32_t func_config;
7678 uint32_t niv_config;
7680 mf_info->multi_vnics_mode = 1;
7682 e1hov_tag = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
7683 func_config = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].config);
7684 niv_config = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].afex_config);
7687 (uint16_t) ((e1hov_tag & FUNC_MF_CFG_E1HOV_TAG_MASK) >>
7688 FUNC_MF_CFG_E1HOV_TAG_SHIFT);
7690 mf_info->default_vlan =
7691 (uint16_t) ((e1hov_tag & FUNC_MF_CFG_AFEX_VLAN_MASK) >>
7692 FUNC_MF_CFG_AFEX_VLAN_SHIFT);
7694 mf_info->niv_allowed_priorities =
7695 (uint8_t) ((niv_config & FUNC_MF_CFG_AFEX_COS_FILTER_MASK) >>
7696 FUNC_MF_CFG_AFEX_COS_FILTER_SHIFT);
7698 mf_info->niv_default_cos =
7699 (uint8_t) ((func_config & FUNC_MF_CFG_TRANSMIT_PRIORITY_MASK) >>
7700 FUNC_MF_CFG_TRANSMIT_PRIORITY_SHIFT);
7702 mf_info->afex_vlan_mode =
7703 ((niv_config & FUNC_MF_CFG_AFEX_VLAN_MODE_MASK) >>
7704 FUNC_MF_CFG_AFEX_VLAN_MODE_SHIFT);
7706 mf_info->niv_mba_enabled =
7707 ((niv_config & FUNC_MF_CFG_AFEX_MBA_ENABLED_MASK) >>
7708 FUNC_MF_CFG_AFEX_MBA_ENABLED_SHIFT);
7710 mf_info->mf_protos_supported =
7711 bnx2x_get_shmem_ext_proto_support_flags(sc);
7713 mf_info->vnics_per_port =
7714 (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
7719 static int bnx2x_check_valid_mf_cfg(struct bnx2x_softc *sc)
7721 struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
7728 /* various MF mode sanity checks... */
7730 if (mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_FUNC_HIDE) {
7732 "Enumerated function %d is marked as hidden",
7737 if ((mf_info->vnics_per_port > 1) && !mf_info->multi_vnics_mode) {
7738 PMD_DRV_LOG(NOTICE, "vnics_per_port=%d multi_vnics_mode=%d",
7739 mf_info->vnics_per_port, mf_info->multi_vnics_mode);
7743 if (mf_info->mf_mode == MULTI_FUNCTION_SD) {
7744 /* vnic id > 0 must have valid ovlan in switch-dependent mode */
7745 if ((SC_VN(sc) > 0) && !VALID_OVLAN(OVLAN(sc))) {
7746 PMD_DRV_LOG(NOTICE, "mf_mode=SD vnic_id=%d ovlan=%d",
7747 SC_VN(sc), OVLAN(sc));
7751 if (!VALID_OVLAN(OVLAN(sc)) && mf_info->multi_vnics_mode) {
7753 "mf_mode=SD multi_vnics_mode=%d ovlan=%d",
7754 mf_info->multi_vnics_mode, OVLAN(sc));
7759 * Verify all functions are either MF or SF mode. If MF, make sure
7760 * sure that all non-hidden functions have a valid ovlan. If SF,
7761 * make sure that all non-hidden functions have an invalid ovlan.
7763 FOREACH_ABS_FUNC_IN_PORT(sc, i) {
7764 mf_cfg1 = MFCFG_RD(sc, func_mf_config[i].config);
7765 ovlan1 = MFCFG_RD(sc, func_mf_config[i].e1hov_tag);
7766 if (!(mf_cfg1 & FUNC_MF_CFG_FUNC_HIDE) &&
7767 (((mf_info->multi_vnics_mode)
7768 && !VALID_OVLAN(ovlan1))
7769 || ((!mf_info->multi_vnics_mode)
7770 && VALID_OVLAN(ovlan1)))) {
7772 "mf_mode=SD function %d MF config "
7773 "mismatch, multi_vnics_mode=%d ovlan=%d",
7774 i, mf_info->multi_vnics_mode,
7780 /* Verify all funcs on the same port each have a different ovlan. */
7781 FOREACH_ABS_FUNC_IN_PORT(sc, i) {
7782 mf_cfg1 = MFCFG_RD(sc, func_mf_config[i].config);
7783 ovlan1 = MFCFG_RD(sc, func_mf_config[i].e1hov_tag);
7784 /* iterate from the next function on the port to the max func */
7785 for (j = i + 2; j < MAX_FUNC_NUM; j += 2) {
7787 MFCFG_RD(sc, func_mf_config[j].config);
7789 MFCFG_RD(sc, func_mf_config[j].e1hov_tag);
7790 if (!(mf_cfg1 & FUNC_MF_CFG_FUNC_HIDE)
7791 && VALID_OVLAN(ovlan1)
7792 && !(mf_cfg2 & FUNC_MF_CFG_FUNC_HIDE)
7793 && VALID_OVLAN(ovlan2)
7794 && (ovlan1 == ovlan2)) {
7796 "mf_mode=SD functions %d and %d "
7797 "have the same ovlan (%d)",
7804 /* MULTI_FUNCTION_SD */
7808 static int bnx2x_get_mf_cfg_info(struct bnx2x_softc *sc)
7810 struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
7811 uint32_t val, mac_upper;
7814 /* initialize mf_info defaults */
7815 mf_info->vnics_per_port = 1;
7816 mf_info->multi_vnics_mode = FALSE;
7817 mf_info->path_has_ovlan = FALSE;
7818 mf_info->mf_mode = SINGLE_FUNCTION;
7820 if (!CHIP_IS_MF_CAP(sc)) {
7824 if (sc->devinfo.mf_cfg_base == SHMEM_MF_CFG_ADDR_NONE) {
7825 PMD_DRV_LOG(NOTICE, "Invalid mf_cfg_base!");
7829 /* get the MF mode (switch dependent / independent / single-function) */
7831 val = SHMEM_RD(sc, dev_info.shared_feature_config.config);
7833 switch (val & SHARED_FEAT_CFG_FORCE_SF_MODE_MASK) {
7834 case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT:
7837 MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
7839 /* check for legal upper mac bytes */
7840 if (mac_upper != FUNC_MF_CFG_UPPERMAC_DEFAULT) {
7841 mf_info->mf_mode = MULTI_FUNCTION_SI;
7844 "Invalid config for Switch Independent mode");
7849 case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED:
7850 case SHARED_FEAT_CFG_FORCE_SF_MODE_SPIO4:
7852 /* get outer vlan configuration */
7853 val = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
7855 if ((val & FUNC_MF_CFG_E1HOV_TAG_MASK) !=
7856 FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
7857 mf_info->mf_mode = MULTI_FUNCTION_SD;
7860 "Invalid config for Switch Dependent mode");
7865 case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF:
7867 /* not in MF mode, vnics_per_port=1 and multi_vnics_mode=FALSE */
7870 case SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE:
7873 * Mark MF mode as NIV if MCP version includes NPAR-SD support
7874 * and the MAC address is valid.
7877 MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
7879 if ((SHMEM2_HAS(sc, afex_driver_support)) &&
7880 (mac_upper != FUNC_MF_CFG_UPPERMAC_DEFAULT)) {
7881 mf_info->mf_mode = MULTI_FUNCTION_AFEX;
7883 PMD_DRV_LOG(NOTICE, "Invalid config for AFEX mode");
7890 PMD_DRV_LOG(NOTICE, "Unknown MF mode (0x%08x)",
7891 (val & SHARED_FEAT_CFG_FORCE_SF_MODE_MASK));
7896 /* set path mf_mode (which could be different than function mf_mode) */
7897 if (mf_info->mf_mode == MULTI_FUNCTION_SD) {
7898 mf_info->path_has_ovlan = TRUE;
7899 } else if (mf_info->mf_mode == SINGLE_FUNCTION) {
7901 * Decide on path multi vnics mode. If we're not in MF mode and in
7902 * 4-port mode, this is good enough to check vnic-0 of the other port
7905 if (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) {
7906 uint8_t other_port = !(PORT_ID(sc) & 1);
7907 uint8_t abs_func_other_port =
7908 (SC_PATH(sc) + (2 * other_port));
7913 [abs_func_other_port].e1hov_tag);
7915 mf_info->path_has_ovlan = VALID_OVLAN((uint16_t) val);
7919 if (mf_info->mf_mode == SINGLE_FUNCTION) {
7920 /* invalid MF config */
7921 if (SC_VN(sc) >= 1) {
7922 PMD_DRV_LOG(NOTICE, "VNIC ID >= 1 in SF mode");
7929 /* get the MF configuration */
7930 mf_info->mf_config[SC_VN(sc)] =
7931 MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].config);
7933 switch (mf_info->mf_mode) {
7934 case MULTI_FUNCTION_SD:
7936 bnx2x_get_shmem_mf_cfg_info_sd(sc);
7939 case MULTI_FUNCTION_SI:
7941 bnx2x_get_shmem_mf_cfg_info_si(sc);
7944 case MULTI_FUNCTION_AFEX:
7946 bnx2x_get_shmem_mf_cfg_info_niv(sc);
7951 PMD_DRV_LOG(NOTICE, "Get MF config failed (mf_mode=0x%08x)",
7956 /* get the congestion management parameters */
7959 FOREACH_ABS_FUNC_IN_PORT(sc, i) {
7960 /* get min/max bw */
7961 val = MFCFG_RD(sc, func_mf_config[i].config);
7962 mf_info->min_bw[vnic] =
7963 ((val & FUNC_MF_CFG_MIN_BW_MASK) >>
7964 FUNC_MF_CFG_MIN_BW_SHIFT);
7965 mf_info->max_bw[vnic] =
7966 ((val & FUNC_MF_CFG_MAX_BW_MASK) >>
7967 FUNC_MF_CFG_MAX_BW_SHIFT);
7971 return bnx2x_check_valid_mf_cfg(sc);
7974 static int bnx2x_get_shmem_info(struct bnx2x_softc *sc)
7977 uint32_t mac_hi, mac_lo, val;
7979 PMD_INIT_FUNC_TRACE();
7982 mac_hi = mac_lo = 0;
7984 sc->link_params.sc = sc;
7985 sc->link_params.port = port;
7987 /* get the hardware config info */
7988 sc->devinfo.hw_config = SHMEM_RD(sc, dev_info.shared_hw_config.config);
7989 sc->devinfo.hw_config2 =
7990 SHMEM_RD(sc, dev_info.shared_hw_config.config2);
7992 sc->link_params.hw_led_mode =
7993 ((sc->devinfo.hw_config & SHARED_HW_CFG_LED_MODE_MASK) >>
7994 SHARED_HW_CFG_LED_MODE_SHIFT);
7996 /* get the port feature config */
7998 SHMEM_RD(sc, dev_info.port_feature_config[port].config);
8000 /* get the link params */
8001 sc->link_params.speed_cap_mask[ELINK_INT_PHY] =
8002 SHMEM_RD(sc, dev_info.port_hw_config[port].speed_capability_mask)
8003 & PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK;
8004 sc->link_params.speed_cap_mask[ELINK_EXT_PHY1] =
8005 SHMEM_RD(sc, dev_info.port_hw_config[port].speed_capability_mask2)
8006 & PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK;
8008 /* get the lane config */
8009 sc->link_params.lane_config =
8010 SHMEM_RD(sc, dev_info.port_hw_config[port].lane_config);
8012 /* get the link config */
8013 val = SHMEM_RD(sc, dev_info.port_feature_config[port].link_config);
8014 sc->port.link_config[ELINK_INT_PHY] = val;
8015 sc->link_params.switch_cfg = (val & PORT_FEATURE_CONNECTED_SWITCH_MASK);
8016 sc->port.link_config[ELINK_EXT_PHY1] =
8017 SHMEM_RD(sc, dev_info.port_feature_config[port].link_config2);
8019 /* get the override preemphasis flag and enable it or turn it off */
8020 val = SHMEM_RD(sc, dev_info.shared_feature_config.config);
8021 if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED) {
8022 sc->link_params.feature_config_flags |=
8023 ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
8025 sc->link_params.feature_config_flags &=
8026 ~ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
8029 /* get the initial value of the link params */
8030 sc->link_params.multi_phy_config =
8031 SHMEM_RD(sc, dev_info.port_hw_config[port].multi_phy_config);
8033 /* get external phy info */
8034 sc->port.ext_phy_config =
8035 SHMEM_RD(sc, dev_info.port_hw_config[port].external_phy_config);
8037 /* get the multifunction configuration */
8038 bnx2x_get_mf_cfg_info(sc);
8040 /* get the mac address */
8043 MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
8045 MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_lower);
8047 mac_hi = SHMEM_RD(sc, dev_info.port_hw_config[port].mac_upper);
8048 mac_lo = SHMEM_RD(sc, dev_info.port_hw_config[port].mac_lower);
8051 if ((mac_lo == 0) && (mac_hi == 0)) {
8052 *sc->mac_addr_str = 0;
8053 PMD_DRV_LOG(NOTICE, "No Ethernet address programmed!");
8055 sc->link_params.mac_addr[0] = (uint8_t) (mac_hi >> 8);
8056 sc->link_params.mac_addr[1] = (uint8_t) (mac_hi);
8057 sc->link_params.mac_addr[2] = (uint8_t) (mac_lo >> 24);
8058 sc->link_params.mac_addr[3] = (uint8_t) (mac_lo >> 16);
8059 sc->link_params.mac_addr[4] = (uint8_t) (mac_lo >> 8);
8060 sc->link_params.mac_addr[5] = (uint8_t) (mac_lo);
8061 snprintf(sc->mac_addr_str, sizeof(sc->mac_addr_str),
8062 "%02x:%02x:%02x:%02x:%02x:%02x",
8063 sc->link_params.mac_addr[0],
8064 sc->link_params.mac_addr[1],
8065 sc->link_params.mac_addr[2],
8066 sc->link_params.mac_addr[3],
8067 sc->link_params.mac_addr[4],
8068 sc->link_params.mac_addr[5]);
8069 PMD_DRV_LOG(DEBUG, "Ethernet address: %s", sc->mac_addr_str);
8075 static void bnx2x_media_detect(struct bnx2x_softc *sc)
8077 uint32_t phy_idx = bnx2x_get_cur_phy_idx(sc);
8078 switch (sc->link_params.phy[phy_idx].media_type) {
8079 case ELINK_ETH_PHY_SFPP_10G_FIBER:
8080 case ELINK_ETH_PHY_SFP_1G_FIBER:
8081 case ELINK_ETH_PHY_XFP_FIBER:
8082 case ELINK_ETH_PHY_KR:
8083 case ELINK_ETH_PHY_CX4:
8084 PMD_DRV_LOG(INFO, "Found 10GBase-CX4 media.");
8085 sc->media = IFM_10G_CX4;
8087 case ELINK_ETH_PHY_DA_TWINAX:
8088 PMD_DRV_LOG(INFO, "Found 10Gb Twinax media.");
8089 sc->media = IFM_10G_TWINAX;
8091 case ELINK_ETH_PHY_BASE_T:
8092 PMD_DRV_LOG(INFO, "Found 10GBase-T media.");
8093 sc->media = IFM_10G_T;
8095 case ELINK_ETH_PHY_NOT_PRESENT:
8096 PMD_DRV_LOG(INFO, "Media not present.");
8099 case ELINK_ETH_PHY_UNSPECIFIED:
8101 PMD_DRV_LOG(INFO, "Unknown media!");
8107 #define GET_FIELD(value, fname) \
8108 (((value) & (fname##_MASK)) >> (fname##_SHIFT))
8109 #define IGU_FID(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID)
8110 #define IGU_VEC(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)
8112 static int bnx2x_get_igu_cam_info(struct bnx2x_softc *sc)
8114 int pfid = SC_FUNC(sc);
8117 uint8_t fid, igu_sb_cnt = 0;
8119 sc->igu_base_sb = 0xff;
8121 if (CHIP_INT_MODE_IS_BC(sc)) {
8123 igu_sb_cnt = sc->igu_sb_cnt;
8124 sc->igu_base_sb = ((CHIP_IS_MODE_4_PORT(sc) ? pfid : vn) *
8126 sc->igu_dsb_id = (E1HVN_MAX * FP_SB_MAX_E1x +
8127 (CHIP_IS_MODE_4_PORT(sc) ? pfid : vn));
8131 /* IGU in normal mode - read CAM */
8133 igu_sb_id < IGU_REG_MAPPING_MEMORY_SIZE; igu_sb_id++) {
8134 val = REG_RD(sc, IGU_REG_MAPPING_MEMORY + igu_sb_id * 4);
8135 if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) {
8139 if ((fid & IGU_FID_ENCODE_IS_PF)) {
8140 if ((fid & IGU_FID_PF_NUM_MASK) != pfid) {
8143 if (IGU_VEC(val) == 0) {
8144 /* default status block */
8145 sc->igu_dsb_id = igu_sb_id;
8147 if (sc->igu_base_sb == 0xff) {
8148 sc->igu_base_sb = igu_sb_id;
8156 * Due to new PF resource allocation by MFW T7.4 and above, it's optional
8157 * that number of CAM entries will not be equal to the value advertised in
8158 * PCI. Driver should use the minimal value of both as the actual status
8161 sc->igu_sb_cnt = min(sc->igu_sb_cnt, igu_sb_cnt);
8163 if (igu_sb_cnt == 0) {
8164 PMD_DRV_LOG(ERR, "CAM configuration error");
8172 * Gather various information from the device config space, the device itself,
8173 * shmem, and the user input.
8175 static int bnx2x_get_device_info(struct bnx2x_softc *sc)
8180 /* get the chip revision (chip metal comes from pci config space) */
8181 sc->devinfo.chip_id = sc->link_params.chip_id =
8182 (((REG_RD(sc, MISC_REG_CHIP_NUM) & 0xffff) << 16) |
8183 ((REG_RD(sc, MISC_REG_CHIP_REV) & 0xf) << 12) |
8184 (((REG_RD(sc, PCICFG_OFFSET + PCI_ID_VAL3) >> 24) & 0xf) << 4) |
8185 ((REG_RD(sc, MISC_REG_BOND_ID) & 0xf) << 0));
8187 /* force 57811 according to MISC register */
8188 if (REG_RD(sc, MISC_REG_CHIP_TYPE) & MISC_REG_CHIP_TYPE_57811_MASK) {
8189 if (CHIP_IS_57810(sc)) {
8190 sc->devinfo.chip_id = ((CHIP_NUM_57811 << 16) |
8192 devinfo.chip_id & 0x0000ffff));
8193 } else if (CHIP_IS_57810_MF(sc)) {
8194 sc->devinfo.chip_id = ((CHIP_NUM_57811_MF << 16) |
8196 devinfo.chip_id & 0x0000ffff));
8198 sc->devinfo.chip_id |= 0x1;
8202 "chip_id=0x%08x (num=0x%04x rev=0x%01x metal=0x%02x bond=0x%01x)",
8203 sc->devinfo.chip_id,
8204 ((sc->devinfo.chip_id >> 16) & 0xffff),
8205 ((sc->devinfo.chip_id >> 12) & 0xf),
8206 ((sc->devinfo.chip_id >> 4) & 0xff),
8207 ((sc->devinfo.chip_id >> 0) & 0xf));
8209 val = (REG_RD(sc, 0x2874) & 0x55);
8210 if ((sc->devinfo.chip_id & 0x1) || (CHIP_IS_E1H(sc) && (val == 0x55))) {
8211 sc->flags |= BNX2X_ONE_PORT_FLAG;
8212 PMD_DRV_LOG(DEBUG, "single port device");
8215 /* set the doorbell size */
8216 sc->doorbell_size = (1 << BNX2X_DB_SHIFT);
8218 /* determine whether the device is in 2 port or 4 port mode */
8219 sc->devinfo.chip_port_mode = CHIP_PORT_MODE_NONE; /* E1h */
8220 if (CHIP_IS_E2E3(sc)) {
8222 * Read port4mode_en_ovwr[0]:
8223 * If 1, four port mode is in port4mode_en_ovwr[1].
8224 * If 0, four port mode is in port4mode_en[0].
8226 val = REG_RD(sc, MISC_REG_PORT4MODE_EN_OVWR);
8228 val = ((val >> 1) & 1);
8230 val = REG_RD(sc, MISC_REG_PORT4MODE_EN);
8233 sc->devinfo.chip_port_mode =
8234 (val) ? CHIP_4_PORT_MODE : CHIP_2_PORT_MODE;
8236 PMD_DRV_LOG(DEBUG, "Port mode = %s", (val) ? "4" : "2");
8239 /* get the function and path info for the device */
8240 bnx2x_get_function_num(sc);
8242 /* get the shared memory base address */
8243 sc->devinfo.shmem_base =
8244 sc->link_params.shmem_base = REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
8245 sc->devinfo.shmem2_base =
8246 REG_RD(sc, (SC_PATH(sc) ? MISC_REG_GENERIC_CR_1 :
8247 MISC_REG_GENERIC_CR_0));
8249 if (!sc->devinfo.shmem_base) {
8250 /* this should ONLY prevent upcoming shmem reads */
8251 PMD_DRV_LOG(INFO, "MCP not active");
8252 sc->flags |= BNX2X_NO_MCP_FLAG;
8256 /* make sure the shared memory contents are valid */
8257 val = SHMEM_RD(sc, validity_map[SC_PORT(sc)]);
8258 if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) !=
8259 (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) {
8260 PMD_DRV_LOG(NOTICE, "Invalid SHMEM validity signature: 0x%08x",
8265 /* get the bootcode version */
8266 sc->devinfo.bc_ver = SHMEM_RD(sc, dev_info.bc_rev);
8267 snprintf(sc->devinfo.bc_ver_str,
8268 sizeof(sc->devinfo.bc_ver_str),
8270 ((sc->devinfo.bc_ver >> 24) & 0xff),
8271 ((sc->devinfo.bc_ver >> 16) & 0xff),
8272 ((sc->devinfo.bc_ver >> 8) & 0xff));
8273 PMD_DRV_LOG(INFO, "Bootcode version: %s", sc->devinfo.bc_ver_str);
8275 /* get the bootcode shmem address */
8276 sc->devinfo.mf_cfg_base = bnx2x_get_shmem_mf_cfg_base(sc);
8278 /* clean indirect addresses as they're not used */
8279 pci_write_long(sc, PCICFG_GRC_ADDRESS, 0);
8281 REG_WR(sc, PXP2_REG_PGL_ADDR_88_F0, 0);
8282 REG_WR(sc, PXP2_REG_PGL_ADDR_8C_F0, 0);
8283 REG_WR(sc, PXP2_REG_PGL_ADDR_90_F0, 0);
8284 REG_WR(sc, PXP2_REG_PGL_ADDR_94_F0, 0);
8285 if (CHIP_IS_E1x(sc)) {
8286 REG_WR(sc, PXP2_REG_PGL_ADDR_88_F1, 0);
8287 REG_WR(sc, PXP2_REG_PGL_ADDR_8C_F1, 0);
8288 REG_WR(sc, PXP2_REG_PGL_ADDR_90_F1, 0);
8289 REG_WR(sc, PXP2_REG_PGL_ADDR_94_F1, 0);
8293 * Enable internal target-read (in case we are probed after PF
8294 * FLR). Must be done prior to any BAR read access. Only for
8297 if (!CHIP_IS_E1x(sc)) {
8298 REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ,
8303 /* get the nvram size */
8304 val = REG_RD(sc, MCP_REG_MCPR_NVM_CFG4);
8305 sc->devinfo.flash_size =
8306 (NVRAM_1MB_SIZE << (val & MCPR_NVM_CFG4_FLASH_SIZE));
8308 bnx2x_set_power_state(sc, PCI_PM_D0);
8309 /* get various configuration parameters from shmem */
8310 bnx2x_get_shmem_info(sc);
8312 /* initialize IGU parameters */
8313 if (CHIP_IS_E1x(sc)) {
8314 sc->devinfo.int_block = INT_BLOCK_HC;
8315 sc->igu_dsb_id = DEF_SB_IGU_ID;
8316 sc->igu_base_sb = 0;
8318 sc->devinfo.int_block = INT_BLOCK_IGU;
8320 /* do not allow device reset during IGU info preocessing */
8321 bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
8323 val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);
8325 if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
8328 val &= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN);
8329 REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION, val);
8330 REG_WR(sc, IGU_REG_RESET_MEMORIES, 0x7f);
8332 while (tout && REG_RD(sc, IGU_REG_RESET_MEMORIES)) {
8337 if (REG_RD(sc, IGU_REG_RESET_MEMORIES)) {
8339 "FORCING IGU Normal Mode failed!!!");
8340 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
8345 if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
8346 PMD_DRV_LOG(DEBUG, "IGU Backward Compatible Mode");
8347 sc->devinfo.int_block |= INT_BLOCK_MODE_BW_COMP;
8349 PMD_DRV_LOG(DEBUG, "IGU Normal Mode");
8352 rc = bnx2x_get_igu_cam_info(sc);
8354 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
8362 * Get base FW non-default (fast path) status block ID. This value is
8363 * used to initialize the fw_sb_id saved on the fp/queue structure to
8364 * determine the id used by the FW.
8366 if (CHIP_IS_E1x(sc)) {
8368 ((SC_PORT(sc) * FP_SB_MAX_E1x) + SC_L_ID(sc));
8371 * 57712+ - We currently use one FW SB per IGU SB (Rx and Tx of
8372 * the same queue are indicated on the same IGU SB). So we prefer
8373 * FW and IGU SBs to be the same value.
8375 sc->base_fw_ndsb = sc->igu_base_sb;
8378 elink_phy_probe(&sc->link_params);
8384 bnx2x_link_settings_supported(struct bnx2x_softc *sc, uint32_t switch_cfg)
8386 uint32_t cfg_size = 0;
8388 uint8_t port = SC_PORT(sc);
8390 /* aggregation of supported attributes of all external phys */
8391 sc->port.supported[0] = 0;
8392 sc->port.supported[1] = 0;
8394 switch (sc->link_params.num_phys) {
8396 sc->port.supported[0] =
8397 sc->link_params.phy[ELINK_INT_PHY].supported;
8401 sc->port.supported[0] =
8402 sc->link_params.phy[ELINK_EXT_PHY1].supported;
8406 if (sc->link_params.multi_phy_config &
8407 PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
8408 sc->port.supported[1] =
8409 sc->link_params.phy[ELINK_EXT_PHY1].supported;
8410 sc->port.supported[0] =
8411 sc->link_params.phy[ELINK_EXT_PHY2].supported;
8413 sc->port.supported[0] =
8414 sc->link_params.phy[ELINK_EXT_PHY1].supported;
8415 sc->port.supported[1] =
8416 sc->link_params.phy[ELINK_EXT_PHY2].supported;
8422 if (!(sc->port.supported[0] || sc->port.supported[1])) {
8424 "Invalid phy config in NVRAM (PHY1=0x%08x PHY2=0x%08x)",
8426 dev_info.port_hw_config
8427 [port].external_phy_config),
8429 dev_info.port_hw_config
8430 [port].external_phy_config2));
8435 sc->port.phy_addr = REG_RD(sc, MISC_REG_WC0_CTRL_PHY_ADDR);
8437 switch (switch_cfg) {
8438 case ELINK_SWITCH_CFG_1G:
8441 NIG_REG_SERDES0_CTRL_PHY_ADDR + port * 0x10);
8443 case ELINK_SWITCH_CFG_10G:
8446 NIG_REG_XGXS0_CTRL_PHY_ADDR + port * 0x18);
8450 "Invalid switch config in"
8451 "link_config=0x%08x",
8452 sc->port.link_config[0]);
8457 PMD_DRV_LOG(INFO, "PHY addr 0x%08x", sc->port.phy_addr);
8459 /* mask what we support according to speed_cap_mask per configuration */
8460 for (idx = 0; idx < cfg_size; idx++) {
8461 if (!(sc->link_params.speed_cap_mask[idx] &
8462 PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) {
8463 sc->port.supported[idx] &=
8464 ~ELINK_SUPPORTED_10baseT_Half;
8467 if (!(sc->link_params.speed_cap_mask[idx] &
8468 PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL)) {
8469 sc->port.supported[idx] &=
8470 ~ELINK_SUPPORTED_10baseT_Full;
8473 if (!(sc->link_params.speed_cap_mask[idx] &
8474 PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) {
8475 sc->port.supported[idx] &=
8476 ~ELINK_SUPPORTED_100baseT_Half;
8479 if (!(sc->link_params.speed_cap_mask[idx] &
8480 PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL)) {
8481 sc->port.supported[idx] &=
8482 ~ELINK_SUPPORTED_100baseT_Full;
8485 if (!(sc->link_params.speed_cap_mask[idx] &
8486 PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) {
8487 sc->port.supported[idx] &=
8488 ~ELINK_SUPPORTED_1000baseT_Full;
8491 if (!(sc->link_params.speed_cap_mask[idx] &
8492 PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) {
8493 sc->port.supported[idx] &=
8494 ~ELINK_SUPPORTED_2500baseX_Full;
8497 if (!(sc->link_params.speed_cap_mask[idx] &
8498 PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
8499 sc->port.supported[idx] &=
8500 ~ELINK_SUPPORTED_10000baseT_Full;
8503 if (!(sc->link_params.speed_cap_mask[idx] &
8504 PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) {
8505 sc->port.supported[idx] &=
8506 ~ELINK_SUPPORTED_20000baseKR2_Full;
8510 PMD_DRV_LOG(INFO, "PHY supported 0=0x%08x 1=0x%08x",
8511 sc->port.supported[0], sc->port.supported[1]);
8514 static void bnx2x_link_settings_requested(struct bnx2x_softc *sc)
8516 uint32_t link_config;
8518 uint32_t cfg_size = 0;
8520 sc->port.advertising[0] = 0;
8521 sc->port.advertising[1] = 0;
8523 switch (sc->link_params.num_phys) {
8533 for (idx = 0; idx < cfg_size; idx++) {
8534 sc->link_params.req_duplex[idx] = DUPLEX_FULL;
8535 link_config = sc->port.link_config[idx];
8537 switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
8538 case PORT_FEATURE_LINK_SPEED_AUTO:
8539 if (sc->port.supported[idx] & ELINK_SUPPORTED_Autoneg) {
8540 sc->link_params.req_line_speed[idx] =
8541 ELINK_SPEED_AUTO_NEG;
8542 sc->port.advertising[idx] |=
8543 sc->port.supported[idx];
8544 if (sc->link_params.phy[ELINK_EXT_PHY1].type ==
8545 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833)
8546 sc->port.advertising[idx] |=
8547 (ELINK_SUPPORTED_100baseT_Half |
8548 ELINK_SUPPORTED_100baseT_Full);
8550 /* force 10G, no AN */
8551 sc->link_params.req_line_speed[idx] =
8553 sc->port.advertising[idx] |=
8554 (ADVERTISED_10000baseT_Full |
8560 case PORT_FEATURE_LINK_SPEED_10M_FULL:
8562 port.supported[idx] & ELINK_SUPPORTED_10baseT_Full)
8564 sc->link_params.req_line_speed[idx] =
8566 sc->port.advertising[idx] |=
8567 (ADVERTISED_10baseT_Full | ADVERTISED_TP);
8570 "Invalid NVRAM config link_config=0x%08x "
8571 "speed_cap_mask=0x%08x",
8574 link_params.speed_cap_mask[idx]);
8579 case PORT_FEATURE_LINK_SPEED_10M_HALF:
8581 port.supported[idx] & ELINK_SUPPORTED_10baseT_Half)
8583 sc->link_params.req_line_speed[idx] =
8585 sc->link_params.req_duplex[idx] = DUPLEX_HALF;
8586 sc->port.advertising[idx] |=
8587 (ADVERTISED_10baseT_Half | ADVERTISED_TP);
8590 "Invalid NVRAM config link_config=0x%08x "
8591 "speed_cap_mask=0x%08x",
8594 link_params.speed_cap_mask[idx]);
8599 case PORT_FEATURE_LINK_SPEED_100M_FULL:
8601 port.supported[idx] & ELINK_SUPPORTED_100baseT_Full)
8603 sc->link_params.req_line_speed[idx] =
8605 sc->port.advertising[idx] |=
8606 (ADVERTISED_100baseT_Full | ADVERTISED_TP);
8609 "Invalid NVRAM config link_config=0x%08x "
8610 "speed_cap_mask=0x%08x",
8613 link_params.speed_cap_mask[idx]);
8618 case PORT_FEATURE_LINK_SPEED_100M_HALF:
8620 port.supported[idx] & ELINK_SUPPORTED_100baseT_Half)
8622 sc->link_params.req_line_speed[idx] =
8624 sc->link_params.req_duplex[idx] = DUPLEX_HALF;
8625 sc->port.advertising[idx] |=
8626 (ADVERTISED_100baseT_Half | ADVERTISED_TP);
8629 "Invalid NVRAM config link_config=0x%08x "
8630 "speed_cap_mask=0x%08x",
8633 link_params.speed_cap_mask[idx]);
8638 case PORT_FEATURE_LINK_SPEED_1G:
8639 if (sc->port.supported[idx] &
8640 ELINK_SUPPORTED_1000baseT_Full) {
8641 sc->link_params.req_line_speed[idx] =
8643 sc->port.advertising[idx] |=
8644 (ADVERTISED_1000baseT_Full | ADVERTISED_TP);
8647 "Invalid NVRAM config link_config=0x%08x "
8648 "speed_cap_mask=0x%08x",
8651 link_params.speed_cap_mask[idx]);
8656 case PORT_FEATURE_LINK_SPEED_2_5G:
8657 if (sc->port.supported[idx] &
8658 ELINK_SUPPORTED_2500baseX_Full) {
8659 sc->link_params.req_line_speed[idx] =
8661 sc->port.advertising[idx] |=
8662 (ADVERTISED_2500baseX_Full | ADVERTISED_TP);
8665 "Invalid NVRAM config link_config=0x%08x "
8666 "speed_cap_mask=0x%08x",
8669 link_params.speed_cap_mask[idx]);
8674 case PORT_FEATURE_LINK_SPEED_10G_CX4:
8675 if (sc->port.supported[idx] &
8676 ELINK_SUPPORTED_10000baseT_Full) {
8677 sc->link_params.req_line_speed[idx] =
8679 sc->port.advertising[idx] |=
8680 (ADVERTISED_10000baseT_Full |
8684 "Invalid NVRAM config link_config=0x%08x "
8685 "speed_cap_mask=0x%08x",
8688 link_params.speed_cap_mask[idx]);
8693 case PORT_FEATURE_LINK_SPEED_20G:
8694 sc->link_params.req_line_speed[idx] = ELINK_SPEED_20000;
8699 "Invalid NVRAM config link_config=0x%08x "
8700 "speed_cap_mask=0x%08x", link_config,
8701 sc->link_params.speed_cap_mask[idx]);
8702 sc->link_params.req_line_speed[idx] =
8703 ELINK_SPEED_AUTO_NEG;
8704 sc->port.advertising[idx] = sc->port.supported[idx];
8708 sc->link_params.req_flow_ctrl[idx] =
8709 (link_config & PORT_FEATURE_FLOW_CONTROL_MASK);
8711 if (sc->link_params.req_flow_ctrl[idx] == ELINK_FLOW_CTRL_AUTO) {
8714 port.supported[idx] & ELINK_SUPPORTED_Autoneg)) {
8715 sc->link_params.req_flow_ctrl[idx] =
8716 ELINK_FLOW_CTRL_NONE;
8718 bnx2x_set_requested_fc(sc);
8724 static void bnx2x_get_phy_info(struct bnx2x_softc *sc)
8726 uint8_t port = SC_PORT(sc);
8729 PMD_INIT_FUNC_TRACE();
8731 /* shmem data already read in bnx2x_get_shmem_info() */
8733 bnx2x_link_settings_supported(sc, sc->link_params.switch_cfg);
8734 bnx2x_link_settings_requested(sc);
8736 /* configure link feature according to nvram value */
8738 (((SHMEM_RD(sc, dev_info.port_feature_config[port].eee_power_mode))
8739 & PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >>
8740 PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT);
8741 if (eee_mode != PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED) {
8742 sc->link_params.eee_mode = (ELINK_EEE_MODE_ADV_LPI |
8743 ELINK_EEE_MODE_ENABLE_LPI |
8744 ELINK_EEE_MODE_OUTPUT_TIME);
8746 sc->link_params.eee_mode = 0;
8749 /* get the media type */
8750 bnx2x_media_detect(sc);
8753 static void bnx2x_set_modes_bitmap(struct bnx2x_softc *sc)
8755 uint32_t flags = MODE_ASIC | MODE_PORT2;
8757 if (CHIP_IS_E2(sc)) {
8759 } else if (CHIP_IS_E3(sc)) {
8761 if (CHIP_REV(sc) == CHIP_REV_Ax) {
8762 flags |= MODE_E3_A0;
8763 } else { /*if (CHIP_REV(sc) == CHIP_REV_Bx) */
8765 flags |= MODE_E3_B0 | MODE_COS3;
8771 switch (sc->devinfo.mf_info.mf_mode) {
8772 case MULTI_FUNCTION_SD:
8773 flags |= MODE_MF_SD;
8775 case MULTI_FUNCTION_SI:
8776 flags |= MODE_MF_SI;
8778 case MULTI_FUNCTION_AFEX:
8779 flags |= MODE_MF_AFEX;
8786 #if defined(__LITTLE_ENDIAN)
8787 flags |= MODE_LITTLE_ENDIAN;
8788 #else /* __BIG_ENDIAN */
8789 flags |= MODE_BIG_ENDIAN;
8792 INIT_MODE_FLAGS(sc) = flags;
8795 int bnx2x_alloc_hsi_mem(struct bnx2x_softc *sc)
8797 struct bnx2x_fastpath *fp;
8802 /************************/
8803 /* DEFAULT STATUS BLOCK */
8804 /************************/
8806 if (bnx2x_dma_alloc(sc, sizeof(struct host_sp_status_block),
8807 &sc->def_sb_dma, "def_sb",
8808 RTE_CACHE_LINE_SIZE) != 0) {
8813 (struct host_sp_status_block *)sc->def_sb_dma.vaddr;
8818 if (bnx2x_dma_alloc(sc, BNX2X_PAGE_SIZE,
8819 &sc->eq_dma, "ev_queue",
8820 RTE_CACHE_LINE_SIZE) != 0) {
8825 sc->eq = (union event_ring_elem *)sc->eq_dma.vaddr;
8831 if (bnx2x_dma_alloc(sc, sizeof(struct bnx2x_slowpath),
8833 RTE_CACHE_LINE_SIZE) != 0) {
8839 sc->sp = (struct bnx2x_slowpath *)sc->sp_dma.vaddr;
8841 /*******************/
8842 /* SLOW PATH QUEUE */
8843 /*******************/
8845 if (bnx2x_dma_alloc(sc, BNX2X_PAGE_SIZE,
8846 &sc->spq_dma, "sp_queue",
8847 RTE_CACHE_LINE_SIZE) != 0) {
8854 sc->spq = (struct eth_spe *)sc->spq_dma.vaddr;
8856 /***************************/
8857 /* FW DECOMPRESSION BUFFER */
8858 /***************************/
8860 if (bnx2x_dma_alloc(sc, FW_BUF_SIZE, &sc->gz_buf_dma,
8861 "fw_buf", RTE_CACHE_LINE_SIZE) != 0) {
8869 sc->gz_buf = (void *)sc->gz_buf_dma.vaddr;
8876 /* allocate DMA memory for each fastpath structure */
8877 for (i = 0; i < sc->num_queues; i++) {
8882 /*******************/
8883 /* FP STATUS BLOCK */
8884 /*******************/
8886 snprintf(buf, sizeof(buf), "fp_%d_sb", i);
8887 if (bnx2x_dma_alloc(sc, sizeof(union bnx2x_host_hc_status_block),
8888 &fp->sb_dma, buf, RTE_CACHE_LINE_SIZE) != 0) {
8889 PMD_DRV_LOG(NOTICE, "Failed to alloc %s", buf);
8892 if (CHIP_IS_E2E3(sc)) {
8893 fp->status_block.e2_sb =
8894 (struct host_hc_status_block_e2 *)
8897 fp->status_block.e1x_sb =
8898 (struct host_hc_status_block_e1x *)
8907 void bnx2x_free_hsi_mem(struct bnx2x_softc *sc)
8909 struct bnx2x_fastpath *fp;
8912 for (i = 0; i < sc->num_queues; i++) {
8915 /*******************/
8916 /* FP STATUS BLOCK */
8917 /*******************/
8919 memset(&fp->status_block, 0, sizeof(fp->status_block));
8922 /***************************/
8923 /* FW DECOMPRESSION BUFFER */
8924 /***************************/
8928 /*******************/
8929 /* SLOW PATH QUEUE */
8930 /*******************/
8946 /************************/
8947 /* DEFAULT STATUS BLOCK */
8948 /************************/
8955 * Previous driver DMAE transaction may have occurred when pre-boot stage
8956 * ended and boot began. This would invalidate the addresses of the
8957 * transaction, resulting in was-error bit set in the PCI causing all
8958 * hw-to-host PCIe transactions to timeout. If this happened we want to clear
8959 * the interrupt which detected this from the pglueb and the was-done bit
8961 static void bnx2x_prev_interrupted_dmae(struct bnx2x_softc *sc)
8965 if (!CHIP_IS_E1x(sc)) {
8966 val = REG_RD(sc, PGLUE_B_REG_PGLUE_B_INT_STS);
8967 if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) {
8968 REG_WR(sc, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR,
8974 static int bnx2x_prev_mcp_done(struct bnx2x_softc *sc)
8976 uint32_t rc = bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE,
8977 DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET);
8979 PMD_DRV_LOG(NOTICE, "MCP response failure, aborting");
8986 static struct bnx2x_prev_list_node *bnx2x_prev_path_get_entry(struct bnx2x_softc *sc)
8988 struct bnx2x_prev_list_node *tmp;
8990 LIST_FOREACH(tmp, &bnx2x_prev_list, node) {
8991 if ((sc->pcie_bus == tmp->bus) &&
8992 (sc->pcie_device == tmp->slot) &&
8993 (SC_PATH(sc) == tmp->path)) {
9001 static uint8_t bnx2x_prev_is_path_marked(struct bnx2x_softc *sc)
9003 struct bnx2x_prev_list_node *tmp;
9006 rte_spinlock_lock(&bnx2x_prev_mtx);
9008 tmp = bnx2x_prev_path_get_entry(sc);
9012 "Path %d/%d/%d was marked by AER",
9013 sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
9017 "Path %d/%d/%d was already cleaned from previous drivers",
9018 sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
9022 rte_spinlock_unlock(&bnx2x_prev_mtx);
9027 static int bnx2x_prev_mark_path(struct bnx2x_softc *sc, uint8_t after_undi)
9029 struct bnx2x_prev_list_node *tmp;
9031 rte_spinlock_lock(&bnx2x_prev_mtx);
9033 /* Check whether the entry for this path already exists */
9034 tmp = bnx2x_prev_path_get_entry(sc);
9038 "Re-marking AER in path %d/%d/%d",
9039 sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
9042 "Removing AER indication from path %d/%d/%d",
9043 sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
9047 rte_spinlock_unlock(&bnx2x_prev_mtx);
9051 rte_spinlock_unlock(&bnx2x_prev_mtx);
9053 /* Create an entry for this path and add it */
9054 tmp = rte_malloc("", sizeof(struct bnx2x_prev_list_node),
9055 RTE_CACHE_LINE_SIZE);
9057 PMD_DRV_LOG(NOTICE, "Failed to allocate 'bnx2x_prev_list_node'");
9061 tmp->bus = sc->pcie_bus;
9062 tmp->slot = sc->pcie_device;
9063 tmp->path = SC_PATH(sc);
9065 tmp->undi = after_undi ? (1 << SC_PORT(sc)) : 0;
9067 rte_spinlock_lock(&bnx2x_prev_mtx);
9069 LIST_INSERT_HEAD(&bnx2x_prev_list, tmp, node);
9071 rte_spinlock_unlock(&bnx2x_prev_mtx);
9076 static int bnx2x_do_flr(struct bnx2x_softc *sc)
9080 /* only E2 and onwards support FLR */
9081 if (CHIP_IS_E1x(sc)) {
9082 PMD_DRV_LOG(WARNING, "FLR not supported in E1H");
9086 /* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */
9087 if (sc->devinfo.bc_ver < REQ_BC_VER_4_INITIATE_FLR) {
9088 PMD_DRV_LOG(WARNING,
9089 "FLR not supported by BC_VER: 0x%08x",
9090 sc->devinfo.bc_ver);
9094 /* Wait for Transaction Pending bit clean */
9095 for (i = 0; i < 4; i++) {
9097 DELAY(((1 << (i - 1)) * 100) * 1000);
9100 if (!bnx2x_is_pcie_pending(sc)) {
9105 PMD_DRV_LOG(NOTICE, "PCIE transaction is not cleared, "
9106 "proceeding with reset anyway");
9109 bnx2x_fw_command(sc, DRV_MSG_CODE_INITIATE_FLR, 0);
9114 struct bnx2x_mac_vals {
9122 uint32_t bmac_val[2];
9126 bnx2x_prev_unload_close_mac(struct bnx2x_softc *sc, struct bnx2x_mac_vals *vals)
9128 uint32_t val, base_addr, offset, mask, reset_reg;
9129 uint8_t mac_stopped = FALSE;
9130 uint8_t port = SC_PORT(sc);
9131 uint32_t wb_data[2];
9133 /* reset addresses as they also mark which values were changed */
9134 vals->bmac_addr = 0;
9135 vals->umac_addr = 0;
9136 vals->xmac_addr = 0;
9137 vals->emac_addr = 0;
9139 reset_reg = REG_RD(sc, MISC_REG_RESET_REG_2);
9141 if (!CHIP_IS_E3(sc)) {
9142 val = REG_RD(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4);
9143 mask = MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port;
9144 if ((mask & reset_reg) && val) {
9145 base_addr = SC_PORT(sc) ? NIG_REG_INGRESS_BMAC1_MEM
9146 : NIG_REG_INGRESS_BMAC0_MEM;
9147 offset = CHIP_IS_E2(sc) ? BIGMAC2_REGISTER_BMAC_CONTROL
9148 : BIGMAC_REGISTER_BMAC_CONTROL;
9151 * use rd/wr since we cannot use dmae. This is safe
9152 * since MCP won't access the bus due to the request
9153 * to unload, and no function on the path can be
9154 * loaded at this time.
9156 wb_data[0] = REG_RD(sc, base_addr + offset);
9157 wb_data[1] = REG_RD(sc, base_addr + offset + 0x4);
9158 vals->bmac_addr = base_addr + offset;
9159 vals->bmac_val[0] = wb_data[0];
9160 vals->bmac_val[1] = wb_data[1];
9161 wb_data[0] &= ~ELINK_BMAC_CONTROL_RX_ENABLE;
9162 REG_WR(sc, vals->bmac_addr, wb_data[0]);
9163 REG_WR(sc, vals->bmac_addr + 0x4, wb_data[1]);
9166 vals->emac_addr = NIG_REG_NIG_EMAC0_EN + SC_PORT(sc) * 4;
9167 vals->emac_val = REG_RD(sc, vals->emac_addr);
9168 REG_WR(sc, vals->emac_addr, 0);
9171 if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) {
9172 base_addr = SC_PORT(sc) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
9173 val = REG_RD(sc, base_addr + XMAC_REG_PFC_CTRL_HI);
9174 REG_WR(sc, base_addr + XMAC_REG_PFC_CTRL_HI,
9176 REG_WR(sc, base_addr + XMAC_REG_PFC_CTRL_HI,
9178 vals->xmac_addr = base_addr + XMAC_REG_CTRL;
9179 vals->xmac_val = REG_RD(sc, vals->xmac_addr);
9180 REG_WR(sc, vals->xmac_addr, 0);
9184 mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port;
9185 if (mask & reset_reg) {
9186 base_addr = SC_PORT(sc) ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
9187 vals->umac_addr = base_addr + UMAC_REG_COMMAND_CONFIG;
9188 vals->umac_val = REG_RD(sc, vals->umac_addr);
9189 REG_WR(sc, vals->umac_addr, 0);
9199 #define BNX2X_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4))
9200 #define BNX2X_PREV_UNDI_RCQ(val) ((val) & 0xffff)
9201 #define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff)
9202 #define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq))
9205 bnx2x_prev_unload_undi_inc(struct bnx2x_softc *sc, uint8_t port, uint8_t inc)
9208 uint32_t tmp_reg = REG_RD(sc, BNX2X_PREV_UNDI_PROD_ADDR(port));
9210 rcq = BNX2X_PREV_UNDI_RCQ(tmp_reg) + inc;
9211 bd = BNX2X_PREV_UNDI_BD(tmp_reg) + inc;
9213 tmp_reg = BNX2X_PREV_UNDI_PROD(rcq, bd);
9214 REG_WR(sc, BNX2X_PREV_UNDI_PROD_ADDR(port), tmp_reg);
9217 static int bnx2x_prev_unload_common(struct bnx2x_softc *sc)
9219 uint32_t reset_reg, tmp_reg = 0, rc;
9220 uint8_t prev_undi = FALSE;
9221 struct bnx2x_mac_vals mac_vals;
9222 uint32_t timer_count = 1000;
9226 * It is possible a previous function received 'common' answer,
9227 * but hasn't loaded yet, therefore creating a scenario of
9228 * multiple functions receiving 'common' on the same path.
9230 memset(&mac_vals, 0, sizeof(mac_vals));
9232 if (bnx2x_prev_is_path_marked(sc)) {
9233 return bnx2x_prev_mcp_done(sc);
9236 reset_reg = REG_RD(sc, MISC_REG_RESET_REG_1);
9238 /* Reset should be performed after BRB is emptied */
9239 if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) {
9240 /* Close the MAC Rx to prevent BRB from filling up */
9241 bnx2x_prev_unload_close_mac(sc, &mac_vals);
9243 /* close LLH filters towards the BRB */
9244 elink_set_rx_filter(&sc->link_params, 0);
9247 * Check if the UNDI driver was previously loaded.
9248 * UNDI driver initializes CID offset for normal bell to 0x7
9250 if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_DORQ) {
9251 tmp_reg = REG_RD(sc, DORQ_REG_NORM_CID_OFST);
9252 if (tmp_reg == 0x7) {
9253 PMD_DRV_LOG(DEBUG, "UNDI previously loaded");
9255 /* clear the UNDI indication */
9256 REG_WR(sc, DORQ_REG_NORM_CID_OFST, 0);
9257 /* clear possible idle check errors */
9258 REG_RD(sc, NIG_REG_NIG_INT_STS_CLR_0);
9262 /* wait until BRB is empty */
9263 tmp_reg = REG_RD(sc, BRB1_REG_NUM_OF_FULL_BLOCKS);
9264 while (timer_count) {
9267 tmp_reg = REG_RD(sc, BRB1_REG_NUM_OF_FULL_BLOCKS);
9272 PMD_DRV_LOG(DEBUG, "BRB still has 0x%08x", tmp_reg);
9274 /* reset timer as long as BRB actually gets emptied */
9275 if (prev_brb > tmp_reg) {
9281 /* If UNDI resides in memory, manually increment it */
9283 bnx2x_prev_unload_undi_inc(sc, SC_PORT(sc), 1);
9290 PMD_DRV_LOG(NOTICE, "Failed to empty BRB");
9294 /* No packets are in the pipeline, path is ready for reset */
9295 bnx2x_reset_common(sc);
9297 if (mac_vals.xmac_addr) {
9298 REG_WR(sc, mac_vals.xmac_addr, mac_vals.xmac_val);
9300 if (mac_vals.umac_addr) {
9301 REG_WR(sc, mac_vals.umac_addr, mac_vals.umac_val);
9303 if (mac_vals.emac_addr) {
9304 REG_WR(sc, mac_vals.emac_addr, mac_vals.emac_val);
9306 if (mac_vals.bmac_addr) {
9307 REG_WR(sc, mac_vals.bmac_addr, mac_vals.bmac_val[0]);
9308 REG_WR(sc, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]);
9311 rc = bnx2x_prev_mark_path(sc, prev_undi);
9313 bnx2x_prev_mcp_done(sc);
9317 return bnx2x_prev_mcp_done(sc);
9320 static int bnx2x_prev_unload_uncommon(struct bnx2x_softc *sc)
9324 /* Test if previous unload process was already finished for this path */
9325 if (bnx2x_prev_is_path_marked(sc)) {
9326 return bnx2x_prev_mcp_done(sc);
9330 * If function has FLR capabilities, and existing FW version matches
9331 * the one required, then FLR will be sufficient to clean any residue
9332 * left by previous driver
9334 rc = bnx2x_nic_load_analyze_req(sc, FW_MSG_CODE_DRV_LOAD_FUNCTION);
9336 /* fw version is good */
9337 rc = bnx2x_do_flr(sc);
9341 /* FLR was performed */
9345 PMD_DRV_LOG(INFO, "Could not FLR");
9347 /* Close the MCP request, return failure */
9348 rc = bnx2x_prev_mcp_done(sc);
9350 rc = BNX2X_PREV_WAIT_NEEDED;
9356 static int bnx2x_prev_unload(struct bnx2x_softc *sc)
9358 int time_counter = 10;
9359 uint32_t fw, hw_lock_reg, hw_lock_val;
9363 * Clear HW from errors which may have resulted from an interrupted
9366 bnx2x_prev_interrupted_dmae(sc);
9368 /* Release previously held locks */
9369 if (SC_FUNC(sc) <= 5)
9370 hw_lock_reg = (MISC_REG_DRIVER_CONTROL_1 + SC_FUNC(sc) * 8);
9373 (MISC_REG_DRIVER_CONTROL_7 + (SC_FUNC(sc) - 6) * 8);
9375 hw_lock_val = (REG_RD(sc, hw_lock_reg));
9377 if (hw_lock_val & HW_LOCK_RESOURCE_NVRAM) {
9378 REG_WR(sc, MCP_REG_MCPR_NVM_SW_ARB,
9379 (MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << SC_PORT(sc)));
9381 REG_WR(sc, hw_lock_reg, 0xffffffff);
9384 if (MCPR_ACCESS_LOCK_LOCK & REG_RD(sc, MCP_REG_MCPR_ACCESS_LOCK)) {
9385 REG_WR(sc, MCP_REG_MCPR_ACCESS_LOCK, 0);
9389 /* Lock MCP using an unload request */
9390 fw = bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0);
9392 PMD_DRV_LOG(NOTICE, "MCP response failure, aborting");
9397 if (fw == FW_MSG_CODE_DRV_UNLOAD_COMMON) {
9398 rc = bnx2x_prev_unload_common(sc);
9402 /* non-common reply from MCP might require looping */
9403 rc = bnx2x_prev_unload_uncommon(sc);
9404 if (rc != BNX2X_PREV_WAIT_NEEDED) {
9409 } while (--time_counter);
9411 if (!time_counter || rc) {
9412 PMD_DRV_LOG(NOTICE, "Failed to unload previous driver!");
9420 bnx2x_dcbx_set_state(struct bnx2x_softc *sc, uint8_t dcb_on, uint32_t dcbx_enabled)
9422 if (!CHIP_IS_E1x(sc)) {
9423 sc->dcb_state = dcb_on;
9424 sc->dcbx_enabled = dcbx_enabled;
9426 sc->dcb_state = FALSE;
9427 sc->dcbx_enabled = BNX2X_DCBX_ENABLED_INVALID;
9430 "DCB state [%s:%s]",
9431 dcb_on ? "ON" : "OFF",
9432 (dcbx_enabled == BNX2X_DCBX_ENABLED_OFF) ? "user-mode" :
9434 BNX2X_DCBX_ENABLED_ON_NEG_OFF) ? "on-chip static"
9436 BNX2X_DCBX_ENABLED_ON_NEG_ON) ?
9437 "on-chip with negotiation" : "invalid");
9440 static int bnx2x_set_qm_cid_count(struct bnx2x_softc *sc)
9442 int cid_count = BNX2X_L2_MAX_CID(sc);
9444 if (CNIC_SUPPORT(sc)) {
9445 cid_count += CNIC_CID_MAX;
9448 return roundup(cid_count, QM_CID_ROUND);
9451 static void bnx2x_init_multi_cos(struct bnx2x_softc *sc)
9455 uint32_t pri_map = 0;
9457 for (pri = 0; pri < BNX2X_MAX_PRIORITY; pri++) {
9458 cos = ((pri_map & (0xf << (pri * 4))) >> (pri * 4));
9459 if (cos < sc->max_cos) {
9460 sc->prio_to_cos[pri] = cos;
9462 PMD_DRV_LOG(WARNING,
9463 "Invalid COS %d for priority %d "
9464 "(max COS is %d), setting to 0", cos, pri,
9466 sc->prio_to_cos[pri] = 0;
9471 static int bnx2x_pci_get_caps(struct bnx2x_softc *sc)
9478 struct bnx2x_pci_cap *cap;
9480 cap = sc->pci_caps = rte_zmalloc("caps", sizeof(struct bnx2x_pci_cap),
9481 RTE_CACHE_LINE_SIZE);
9483 PMD_DRV_LOG(NOTICE, "Failed to allocate memory");
9488 pci_read(sc, PCI_STATUS, &status, 2);
9489 if (!(status & PCI_STATUS_CAP_LIST)) {
9491 pci_read(sc, PCIR_STATUS, &status, 2);
9492 if (!(status & PCIM_STATUS_CAPPRESENT)) {
9494 PMD_DRV_LOG(NOTICE, "PCIe capability reading failed");
9499 pci_read(sc, PCI_CAPABILITY_LIST, &pci_cap.next, 1);
9501 pci_read(sc, PCIR_CAP_PTR, &pci_cap.next, 1);
9503 while (pci_cap.next) {
9504 cap->addr = pci_cap.next & ~3;
9505 pci_read(sc, pci_cap.next & ~3, &pci_cap, 2);
9506 if (pci_cap.id == 0xff)
9508 cap->id = pci_cap.id;
9509 cap->type = BNX2X_PCI_CAP;
9510 cap->next = rte_zmalloc("pci_cap",
9511 sizeof(struct bnx2x_pci_cap),
9512 RTE_CACHE_LINE_SIZE);
9514 PMD_DRV_LOG(NOTICE, "Failed to allocate memory");
9523 static void bnx2x_init_rte(struct bnx2x_softc *sc)
9526 sc->max_tx_queues = min(BNX2X_VF_MAX_QUEUES_PER_VF,
9528 sc->max_rx_queues = min(BNX2X_VF_MAX_QUEUES_PER_VF,
9531 sc->max_rx_queues = BNX2X_MAX_RSS_COUNT(sc);
9532 sc->max_tx_queues = sc->max_rx_queues;
9536 #define FW_HEADER_LEN 104
9537 #define FW_NAME_57711 "/lib/firmware/bnx2x/bnx2x-e1h-7.2.51.0.fw"
9538 #define FW_NAME_57810 "/lib/firmware/bnx2x/bnx2x-e2-7.2.51.0.fw"
9540 void bnx2x_load_firmware(struct bnx2x_softc *sc)
9546 fwname = sc->devinfo.device_id == CHIP_NUM_57711
9547 ? FW_NAME_57711 : FW_NAME_57810;
9548 f = open(fwname, O_RDONLY);
9550 PMD_DRV_LOG(NOTICE, "Can't open firmware file");
9554 if (fstat(f, &st) < 0) {
9555 PMD_DRV_LOG(NOTICE, "Can't stat firmware file");
9560 sc->firmware = rte_zmalloc("bnx2x_fw", st.st_size, RTE_CACHE_LINE_SIZE);
9561 if (!sc->firmware) {
9562 PMD_DRV_LOG(NOTICE, "Can't allocate memory for firmware");
9567 if (read(f, sc->firmware, st.st_size) != st.st_size) {
9568 PMD_DRV_LOG(NOTICE, "Can't read firmware data");
9574 sc->fw_len = st.st_size;
9575 if (sc->fw_len < FW_HEADER_LEN) {
9576 PMD_DRV_LOG(NOTICE, "Invalid fw size: %" PRIu64, sc->fw_len);
9579 PMD_DRV_LOG(DEBUG, "fw_len = %" PRIu64, sc->fw_len);
9583 bnx2x_data_to_init_ops(uint8_t * data, struct raw_op *dst, uint32_t len)
9585 uint32_t *src = (uint32_t *) data;
9588 for (i = 0, j = 0; i < len / 8; ++i, j += 2) {
9589 tmp = rte_be_to_cpu_32(src[j]);
9590 dst[i].op = (tmp >> 24) & 0xFF;
9591 dst[i].offset = tmp & 0xFFFFFF;
9592 dst[i].raw_data = rte_be_to_cpu_32(src[j + 1]);
9597 bnx2x_data_to_init_offsets(uint8_t * data, uint16_t * dst, uint32_t len)
9599 uint16_t *src = (uint16_t *) data;
9602 for (i = 0; i < len / 2; ++i)
9603 dst[i] = rte_be_to_cpu_16(src[i]);
9606 static void bnx2x_data_to_init_data(uint8_t * data, uint32_t * dst, uint32_t len)
9608 uint32_t *src = (uint32_t *) data;
9611 for (i = 0; i < len / 4; ++i)
9612 dst[i] = rte_be_to_cpu_32(src[i]);
9615 static void bnx2x_data_to_iro_array(uint8_t * data, struct iro *dst, uint32_t len)
9617 uint32_t *src = (uint32_t *) data;
9620 for (i = 0, j = 0; i < len / sizeof(struct iro); ++i, ++j) {
9621 dst[i].base = rte_be_to_cpu_32(src[j++]);
9622 tmp = rte_be_to_cpu_32(src[j]);
9623 dst[i].m1 = (tmp >> 16) & 0xFFFF;
9624 dst[i].m2 = tmp & 0xFFFF;
9626 tmp = rte_be_to_cpu_32(src[j]);
9627 dst[i].m3 = (tmp >> 16) & 0xFFFF;
9628 dst[i].size = tmp & 0xFFFF;
9633 * Device attach function.
9635 * Allocates device resources, performs secondary chip identification, and
9636 * initializes driver instance variables. This function is called from driver
9637 * load after a successful probe.
9640 * 0 = Success, >0 = Failure
9642 int bnx2x_attach(struct bnx2x_softc *sc)
9646 PMD_DRV_LOG(DEBUG, "Starting attach...");
9648 rc = bnx2x_pci_get_caps(sc);
9650 PMD_DRV_LOG(NOTICE, "PCIe caps reading was failed");
9654 sc->state = BNX2X_STATE_CLOSED;
9656 pci_write_long(sc, PCICFG_GRC_ADDRESS, PCICFG_VENDOR_ID_OFFSET);
9658 sc->igu_base_addr = IS_VF(sc) ? PXP_VF_ADDR_IGU_START : BAR_IGU_INTMEM;
9660 /* get PCI capabilites */
9661 bnx2x_probe_pci_caps(sc);
9663 if (sc->devinfo.pcie_msix_cap_reg != 0) {
9666 (sc->devinfo.pcie_msix_cap_reg + PCIR_MSIX_CTRL), &val,
9668 sc->igu_sb_cnt = (val & PCIM_MSIXCTRL_TABLE_SIZE) + 1;
9673 /* Init RTE stuff */
9677 /* get device info and set params */
9678 if (bnx2x_get_device_info(sc) != 0) {
9679 PMD_DRV_LOG(NOTICE, "getting device info");
9683 /* get phy settings from shmem and 'and' against admin settings */
9684 bnx2x_get_phy_info(sc);
9686 /* Left mac of VF unfilled, PF should set it for VF */
9687 memset(sc->link_params.mac_addr, 0, ETHER_ADDR_LEN);
9692 /* set the default MTU (changed via ifconfig) */
9693 sc->mtu = ETHER_MTU;
9695 bnx2x_set_modes_bitmap(sc);
9697 /* need to reset chip if UNDI was active */
9698 if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
9701 (SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_mb_header) &
9702 DRV_MSG_SEQ_NUMBER_MASK);
9703 bnx2x_prev_unload(sc);
9706 bnx2x_dcbx_set_state(sc, FALSE, BNX2X_DCBX_ENABLED_OFF);
9708 /* calculate qm_cid_count */
9709 sc->qm_cid_count = bnx2x_set_qm_cid_count(sc);
9712 bnx2x_init_multi_cos(sc);
9718 bnx2x_igu_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id, uint8_t segment,
9719 uint16_t index, uint8_t op, uint8_t update)
9721 uint32_t igu_addr = sc->igu_base_addr;
9722 igu_addr += (IGU_CMD_INT_ACK_BASE + igu_sb_id) * 8;
9723 bnx2x_igu_ack_sb_gen(sc, segment, index, op, update, igu_addr);
9727 bnx2x_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id, uint8_t storm,
9728 uint16_t index, uint8_t op, uint8_t update)
9730 if (unlikely(sc->devinfo.int_block == INT_BLOCK_HC))
9731 bnx2x_hc_ack_sb(sc, igu_sb_id, storm, index, op, update);
9734 if (CHIP_INT_MODE_IS_BC(sc)) {
9736 } else if (igu_sb_id != sc->igu_dsb_id) {
9737 segment = IGU_SEG_ACCESS_DEF;
9738 } else if (storm == ATTENTION_ID) {
9739 segment = IGU_SEG_ACCESS_ATTN;
9741 segment = IGU_SEG_ACCESS_DEF;
9743 bnx2x_igu_ack_sb(sc, igu_sb_id, segment, index, op, update);
9748 bnx2x_igu_clear_sb_gen(struct bnx2x_softc *sc, uint8_t func, uint8_t idu_sb_id,
9751 uint32_t data, ctl, cnt = 100;
9752 uint32_t igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA;
9753 uint32_t igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL;
9754 uint32_t igu_addr_ack = IGU_REG_CSTORM_TYPE_0_SB_CLEANUP +
9755 (idu_sb_id / 32) * 4;
9756 uint32_t sb_bit = 1 << (idu_sb_id % 32);
9757 uint32_t func_encode = func |
9758 (is_pf ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT;
9759 uint32_t addr_encode = IGU_CMD_E2_PROD_UPD_BASE + idu_sb_id;
9761 /* Not supported in BC mode */
9762 if (CHIP_INT_MODE_IS_BC(sc)) {
9766 data = ((IGU_USE_REGISTER_cstorm_type_0_sb_cleanup <<
9767 IGU_REGULAR_CLEANUP_TYPE_SHIFT) |
9768 IGU_REGULAR_CLEANUP_SET | IGU_REGULAR_BCLEANUP);
9770 ctl = ((addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT) |
9771 (func_encode << IGU_CTRL_REG_FID_SHIFT) |
9772 (IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT));
9774 REG_WR(sc, igu_addr_data, data);
9778 PMD_DRV_LOG(DEBUG, "write 0x%08x to IGU(via GRC) addr 0x%x",
9780 REG_WR(sc, igu_addr_ctl, ctl);
9784 /* wait for clean up to finish */
9785 while (!(REG_RD(sc, igu_addr_ack) & sb_bit) && --cnt) {
9789 if (!(REG_RD(sc, igu_addr_ack) & sb_bit)) {
9791 "Unable to finish IGU cleanup: "
9792 "idu_sb_id %d offset %d bit %d (cnt %d)",
9793 idu_sb_id, idu_sb_id / 32, idu_sb_id % 32, cnt);
9797 static void bnx2x_igu_clear_sb(struct bnx2x_softc *sc, uint8_t idu_sb_id)
9799 bnx2x_igu_clear_sb_gen(sc, SC_FUNC(sc), idu_sb_id, TRUE /*PF*/);
9802 /*******************/
9803 /* ECORE CALLBACKS */
9804 /*******************/
9806 static void bnx2x_reset_common(struct bnx2x_softc *sc)
9808 uint32_t val = 0x1400;
9810 PMD_INIT_FUNC_TRACE();
9813 REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR),
9816 if (CHIP_IS_E3(sc)) {
9817 val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
9818 val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
9821 REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR), val);
9824 static void bnx2x_common_init_phy(struct bnx2x_softc *sc)
9826 uint32_t shmem_base[2];
9827 uint32_t shmem2_base[2];
9829 /* Avoid common init in case MFW supports LFA */
9830 if (SHMEM2_RD(sc, size) >
9831 (uint32_t) offsetof(struct shmem2_region,
9832 lfa_host_addr[SC_PORT(sc)])) {
9836 shmem_base[0] = sc->devinfo.shmem_base;
9837 shmem2_base[0] = sc->devinfo.shmem2_base;
9839 if (!CHIP_IS_E1x(sc)) {
9840 shmem_base[1] = SHMEM2_RD(sc, other_shmem_base_addr);
9841 shmem2_base[1] = SHMEM2_RD(sc, other_shmem2_base_addr);
9844 elink_common_init_phy(sc, shmem_base, shmem2_base,
9845 sc->devinfo.chip_id, 0);
9848 static void bnx2x_pf_disable(struct bnx2x_softc *sc)
9850 uint32_t val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
9852 val &= ~IGU_PF_CONF_FUNC_EN;
9854 REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
9855 REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
9856 REG_WR(sc, CFC_REG_WEAK_ENABLE_PF, 0);
9859 static void bnx2x_init_pxp(struct bnx2x_softc *sc)
9862 int r_order, w_order;
9864 devctl = bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_DEVICE_CTL);
9866 w_order = ((devctl & PCIM_EXP_CTL_MAX_PAYLOAD) >> 5);
9867 r_order = ((devctl & PCIM_EXP_CTL_MAX_READ_REQUEST) >> 12);
9869 ecore_init_pxp_arb(sc, r_order, w_order);
9872 static uint32_t bnx2x_get_pretend_reg(struct bnx2x_softc *sc)
9874 uint32_t base = PXP2_REG_PGL_PRETEND_FUNC_F0;
9875 uint32_t stride = (PXP2_REG_PGL_PRETEND_FUNC_F1 - base);
9876 return base + (SC_ABS_FUNC(sc)) * stride;
9880 * Called only on E1H or E2.
9881 * When pretending to be PF, the pretend value is the function number 0..7.
9882 * When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID
9885 static int bnx2x_pretend_func(struct bnx2x_softc *sc, uint16_t pretend_func_val)
9887 uint32_t pretend_reg;
9889 if (CHIP_IS_E1H(sc) && (pretend_func_val > E1H_FUNC_MAX))
9892 /* get my own pretend register */
9893 pretend_reg = bnx2x_get_pretend_reg(sc);
9894 REG_WR(sc, pretend_reg, pretend_func_val);
9895 REG_RD(sc, pretend_reg);
9899 static void bnx2x_setup_fan_failure_detection(struct bnx2x_softc *sc)
9906 val = (SHMEM_RD(sc, dev_info.shared_hw_config.config2) &
9907 SHARED_HW_CFG_FAN_FAILURE_MASK);
9909 if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED) {
9913 * The fan failure mechanism is usually related to the PHY type since
9914 * the power consumption of the board is affected by the PHY. Currently,
9915 * fan is required for most designs with SFX7101, BNX2X8727 and BNX2X8481.
9917 else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE) {
9918 for (port = PORT_0; port < PORT_MAX; port++) {
9919 is_required |= elink_fan_failure_det_req(sc,
9923 devinfo.shmem2_base,
9928 if (is_required == 0) {
9932 /* Fan failure is indicated by SPIO 5 */
9933 bnx2x_set_spio(sc, MISC_SPIO_SPIO5, MISC_SPIO_INPUT_HI_Z);
9935 /* set to active low mode */
9936 val = REG_RD(sc, MISC_REG_SPIO_INT);
9937 val |= (MISC_SPIO_SPIO5 << MISC_SPIO_INT_OLD_SET_POS);
9938 REG_WR(sc, MISC_REG_SPIO_INT, val);
9940 /* enable interrupt to signal the IGU */
9941 val = REG_RD(sc, MISC_REG_SPIO_EVENT_EN);
9942 val |= MISC_SPIO_SPIO5;
9943 REG_WR(sc, MISC_REG_SPIO_EVENT_EN, val);
9946 static void bnx2x_enable_blocks_attention(struct bnx2x_softc *sc)
9950 REG_WR(sc, PXP_REG_PXP_INT_MASK_0, 0);
9951 if (!CHIP_IS_E1x(sc)) {
9952 REG_WR(sc, PXP_REG_PXP_INT_MASK_1, 0x40);
9954 REG_WR(sc, PXP_REG_PXP_INT_MASK_1, 0);
9956 REG_WR(sc, DORQ_REG_DORQ_INT_MASK, 0);
9957 REG_WR(sc, CFC_REG_CFC_INT_MASK, 0);
9959 * mask read length error interrupts in brb for parser
9960 * (parsing unit and 'checksum and crc' unit)
9961 * these errors are legal (PU reads fixed length and CAC can cause
9962 * read length error on truncated packets)
9964 REG_WR(sc, BRB1_REG_BRB1_INT_MASK, 0xFC00);
9965 REG_WR(sc, QM_REG_QM_INT_MASK, 0);
9966 REG_WR(sc, TM_REG_TM_INT_MASK, 0);
9967 REG_WR(sc, XSDM_REG_XSDM_INT_MASK_0, 0);
9968 REG_WR(sc, XSDM_REG_XSDM_INT_MASK_1, 0);
9969 REG_WR(sc, XCM_REG_XCM_INT_MASK, 0);
9970 /* REG_WR(sc, XSEM_REG_XSEM_INT_MASK_0, 0); */
9971 /* REG_WR(sc, XSEM_REG_XSEM_INT_MASK_1, 0); */
9972 REG_WR(sc, USDM_REG_USDM_INT_MASK_0, 0);
9973 REG_WR(sc, USDM_REG_USDM_INT_MASK_1, 0);
9974 REG_WR(sc, UCM_REG_UCM_INT_MASK, 0);
9975 /* REG_WR(sc, USEM_REG_USEM_INT_MASK_0, 0); */
9976 /* REG_WR(sc, USEM_REG_USEM_INT_MASK_1, 0); */
9977 REG_WR(sc, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0);
9978 REG_WR(sc, CSDM_REG_CSDM_INT_MASK_0, 0);
9979 REG_WR(sc, CSDM_REG_CSDM_INT_MASK_1, 0);
9980 REG_WR(sc, CCM_REG_CCM_INT_MASK, 0);
9981 /* REG_WR(sc, CSEM_REG_CSEM_INT_MASK_0, 0); */
9982 /* REG_WR(sc, CSEM_REG_CSEM_INT_MASK_1, 0); */
9984 val = (PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT |
9985 PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF |
9986 PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN);
9987 if (!CHIP_IS_E1x(sc)) {
9988 val |= (PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED |
9989 PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED);
9991 REG_WR(sc, PXP2_REG_PXP2_INT_MASK_0, val);
9993 REG_WR(sc, TSDM_REG_TSDM_INT_MASK_0, 0);
9994 REG_WR(sc, TSDM_REG_TSDM_INT_MASK_1, 0);
9995 REG_WR(sc, TCM_REG_TCM_INT_MASK, 0);
9996 /* REG_WR(sc, TSEM_REG_TSEM_INT_MASK_0, 0); */
9998 if (!CHIP_IS_E1x(sc)) {
9999 /* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */
10000 REG_WR(sc, TSEM_REG_TSEM_INT_MASK_1, 0x07ff);
10003 REG_WR(sc, CDU_REG_CDU_INT_MASK, 0);
10004 REG_WR(sc, DMAE_REG_DMAE_INT_MASK, 0);
10005 /* REG_WR(sc, MISC_REG_MISC_INT_MASK, 0); */
10006 REG_WR(sc, PBF_REG_PBF_INT_MASK, 0x18); /* bit 3,4 masked */
10010 * bnx2x_init_hw_common - initialize the HW at the COMMON phase.
10012 * @sc: driver handle
10014 static int bnx2x_init_hw_common(struct bnx2x_softc *sc)
10016 uint8_t abs_func_id;
10019 PMD_DRV_LOG(DEBUG, "starting common init for func %d", SC_ABS_FUNC(sc));
10022 * take the RESET lock to protect undi_unload flow from accessing
10023 * registers while we are resetting the chip
10025 bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
10027 bnx2x_reset_common(sc);
10029 REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET), 0xffffffff);
10032 if (CHIP_IS_E3(sc)) {
10033 val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
10034 val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
10037 REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET), val);
10039 bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
10041 ecore_init_block(sc, BLOCK_MISC, PHASE_COMMON);
10043 if (!CHIP_IS_E1x(sc)) {
10045 * 4-port mode or 2-port mode we need to turn off master-enable for
10046 * everyone. After that we turn it back on for self. So, we disregard
10047 * multi-function, and always disable all functions on the given path,
10048 * this means 0,2,4,6 for path 0 and 1,3,5,7 for path 1
10050 for (abs_func_id = SC_PATH(sc);
10051 abs_func_id < (E2_FUNC_MAX * 2); abs_func_id += 2) {
10052 if (abs_func_id == SC_ABS_FUNC(sc)) {
10054 PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER,
10059 bnx2x_pretend_func(sc, abs_func_id);
10061 /* clear pf enable */
10062 bnx2x_pf_disable(sc);
10064 bnx2x_pretend_func(sc, SC_ABS_FUNC(sc));
10068 ecore_init_block(sc, BLOCK_PXP, PHASE_COMMON);
10070 ecore_init_block(sc, BLOCK_PXP2, PHASE_COMMON);
10071 bnx2x_init_pxp(sc);
10073 #ifdef __BIG_ENDIAN
10074 REG_WR(sc, PXP2_REG_RQ_QM_ENDIAN_M, 1);
10075 REG_WR(sc, PXP2_REG_RQ_TM_ENDIAN_M, 1);
10076 REG_WR(sc, PXP2_REG_RQ_SRC_ENDIAN_M, 1);
10077 REG_WR(sc, PXP2_REG_RQ_CDU_ENDIAN_M, 1);
10078 REG_WR(sc, PXP2_REG_RQ_DBG_ENDIAN_M, 1);
10079 /* make sure this value is 0 */
10080 REG_WR(sc, PXP2_REG_RQ_HC_ENDIAN_M, 0);
10082 //REG_WR(sc, PXP2_REG_RD_PBF_SWAP_MODE, 1);
10083 REG_WR(sc, PXP2_REG_RD_QM_SWAP_MODE, 1);
10084 REG_WR(sc, PXP2_REG_RD_TM_SWAP_MODE, 1);
10085 REG_WR(sc, PXP2_REG_RD_SRC_SWAP_MODE, 1);
10086 REG_WR(sc, PXP2_REG_RD_CDURD_SWAP_MODE, 1);
10089 ecore_ilt_init_page_size(sc, INITOP_SET);
10091 if (CHIP_REV_IS_FPGA(sc) && CHIP_IS_E1H(sc)) {
10092 REG_WR(sc, PXP2_REG_PGL_TAGS_LIMIT, 0x1);
10095 /* let the HW do it's magic... */
10098 /* finish PXP init */
10100 val = REG_RD(sc, PXP2_REG_RQ_CFG_DONE);
10102 PMD_DRV_LOG(NOTICE, "PXP2 CFG failed");
10105 val = REG_RD(sc, PXP2_REG_RD_INIT_DONE);
10107 PMD_DRV_LOG(NOTICE, "PXP2 RD_INIT failed");
10112 * Timer bug workaround for E2 only. We need to set the entire ILT to have
10113 * entries with value "0" and valid bit on. This needs to be done by the
10114 * first PF that is loaded in a path (i.e. common phase)
10116 if (!CHIP_IS_E1x(sc)) {
10118 * In E2 there is a bug in the timers block that can cause function 6 / 7
10119 * (i.e. vnic3) to start even if it is marked as "scan-off".
10120 * This occurs when a different function (func2,3) is being marked
10121 * as "scan-off". Real-life scenario for example: if a driver is being
10122 * load-unloaded while func6,7 are down. This will cause the timer to access
10123 * the ilt, translate to a logical address and send a request to read/write.
10124 * Since the ilt for the function that is down is not valid, this will cause
10125 * a translation error which is unrecoverable.
10126 * The Workaround is intended to make sure that when this happens nothing
10127 * fatal will occur. The workaround:
10128 * 1. First PF driver which loads on a path will:
10129 * a. After taking the chip out of reset, by using pretend,
10130 * it will write "0" to the following registers of
10132 * REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
10133 * REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0);
10134 * REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0);
10135 * And for itself it will write '1' to
10136 * PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable
10137 * dmae-operations (writing to pram for example.)
10138 * note: can be done for only function 6,7 but cleaner this
10140 * b. Write zero+valid to the entire ILT.
10141 * c. Init the first_timers_ilt_entry, last_timers_ilt_entry of
10142 * VNIC3 (of that port). The range allocated will be the
10143 * entire ILT. This is needed to prevent ILT range error.
10144 * 2. Any PF driver load flow:
10145 * a. ILT update with the physical addresses of the allocated
10147 * b. Wait 20msec. - note that this timeout is needed to make
10148 * sure there are no requests in one of the PXP internal
10149 * queues with "old" ILT addresses.
10150 * c. PF enable in the PGLC.
10151 * d. Clear the was_error of the PF in the PGLC. (could have
10152 * occurred while driver was down)
10153 * e. PF enable in the CFC (WEAK + STRONG)
10154 * f. Timers scan enable
10155 * 3. PF driver unload flow:
10156 * a. Clear the Timers scan_en.
10157 * b. Polling for scan_on=0 for that PF.
10158 * c. Clear the PF enable bit in the PXP.
10159 * d. Clear the PF enable in the CFC (WEAK + STRONG)
10160 * e. Write zero+valid to all ILT entries (The valid bit must
10162 * f. If this is VNIC 3 of a port then also init
10163 * first_timers_ilt_entry to zero and last_timers_ilt_entry
10164 * to the last enrty in the ILT.
10167 * Currently the PF error in the PGLC is non recoverable.
10168 * In the future the there will be a recovery routine for this error.
10169 * Currently attention is masked.
10170 * Having an MCP lock on the load/unload process does not guarantee that
10171 * there is no Timer disable during Func6/7 enable. This is because the
10172 * Timers scan is currently being cleared by the MCP on FLR.
10173 * Step 2.d can be done only for PF6/7 and the driver can also check if
10174 * there is error before clearing it. But the flow above is simpler and
10176 * All ILT entries are written by zero+valid and not just PF6/7
10177 * ILT entries since in the future the ILT entries allocation for
10178 * PF-s might be dynamic.
10180 struct ilt_client_info ilt_cli;
10181 struct ecore_ilt ilt;
10183 memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
10184 memset(&ilt, 0, sizeof(struct ecore_ilt));
10186 /* initialize dummy TM client */
10188 ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
10189 ilt_cli.client_num = ILT_CLIENT_TM;
10192 * Step 1: set zeroes to all ilt page entries with valid bit on
10193 * Step 2: set the timers first/last ilt entry to point
10194 * to the entire range to prevent ILT range error for 3rd/4th
10195 * vnic (this code assumes existence of the vnic)
10197 * both steps performed by call to ecore_ilt_client_init_op()
10198 * with dummy TM client
10200 * we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT
10201 * and his brother are split registers
10204 bnx2x_pretend_func(sc, (SC_PATH(sc) + 6));
10205 ecore_ilt_client_init_op_ilt(sc, &ilt, &ilt_cli, INITOP_CLEAR);
10206 bnx2x_pretend_func(sc, SC_ABS_FUNC(sc));
10208 REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN, BNX2X_PXP_DRAM_ALIGN);
10209 REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN_RD, BNX2X_PXP_DRAM_ALIGN);
10210 REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1);
10213 REG_WR(sc, PXP2_REG_RQ_DISABLE_INPUTS, 0);
10214 REG_WR(sc, PXP2_REG_RD_DISABLE_INPUTS, 0);
10216 if (!CHIP_IS_E1x(sc)) {
10219 ecore_init_block(sc, BLOCK_PGLUE_B, PHASE_COMMON);
10220 ecore_init_block(sc, BLOCK_ATC, PHASE_COMMON);
10222 /* let the HW do it's magic... */
10225 val = REG_RD(sc, ATC_REG_ATC_INIT_DONE);
10226 } while (factor-- && (val != 1));
10229 PMD_DRV_LOG(NOTICE, "ATC_INIT failed");
10234 ecore_init_block(sc, BLOCK_DMAE, PHASE_COMMON);
10236 /* clean the DMAE memory */
10237 sc->dmae_ready = 1;
10238 ecore_init_fill(sc, TSEM_REG_PRAM, 0, 8);
10240 ecore_init_block(sc, BLOCK_TCM, PHASE_COMMON);
10242 ecore_init_block(sc, BLOCK_UCM, PHASE_COMMON);
10244 ecore_init_block(sc, BLOCK_CCM, PHASE_COMMON);
10246 ecore_init_block(sc, BLOCK_XCM, PHASE_COMMON);
10248 bnx2x_read_dmae(sc, XSEM_REG_PASSIVE_BUFFER, 3);
10249 bnx2x_read_dmae(sc, CSEM_REG_PASSIVE_BUFFER, 3);
10250 bnx2x_read_dmae(sc, TSEM_REG_PASSIVE_BUFFER, 3);
10251 bnx2x_read_dmae(sc, USEM_REG_PASSIVE_BUFFER, 3);
10253 ecore_init_block(sc, BLOCK_QM, PHASE_COMMON);
10255 /* QM queues pointers table */
10256 ecore_qm_init_ptr_table(sc, sc->qm_cid_count, INITOP_SET);
10258 /* soft reset pulse */
10259 REG_WR(sc, QM_REG_SOFT_RESET, 1);
10260 REG_WR(sc, QM_REG_SOFT_RESET, 0);
10262 if (CNIC_SUPPORT(sc))
10263 ecore_init_block(sc, BLOCK_TM, PHASE_COMMON);
10265 ecore_init_block(sc, BLOCK_DORQ, PHASE_COMMON);
10266 REG_WR(sc, DORQ_REG_DPM_CID_OFST, BNX2X_DB_SHIFT);
10268 if (!CHIP_REV_IS_SLOW(sc)) {
10269 /* enable hw interrupt from doorbell Q */
10270 REG_WR(sc, DORQ_REG_DORQ_INT_MASK, 0);
10273 ecore_init_block(sc, BLOCK_BRB1, PHASE_COMMON);
10275 ecore_init_block(sc, BLOCK_PRS, PHASE_COMMON);
10276 REG_WR(sc, PRS_REG_A_PRSU_20, 0xf);
10277 REG_WR(sc, PRS_REG_E1HOV_MODE, sc->devinfo.mf_info.path_has_ovlan);
10279 if (!CHIP_IS_E1x(sc) && !CHIP_IS_E3B0(sc)) {
10280 if (IS_MF_AFEX(sc)) {
10282 * configure that AFEX and VLAN headers must be
10283 * received in AFEX mode
10285 REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC, 0xE);
10286 REG_WR(sc, PRS_REG_MUST_HAVE_HDRS, 0xA);
10287 REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0, 0x6);
10288 REG_WR(sc, PRS_REG_TAG_ETHERTYPE_0, 0x8926);
10289 REG_WR(sc, PRS_REG_TAG_LEN_0, 0x4);
10292 * Bit-map indicating which L2 hdrs may appear
10293 * after the basic Ethernet header
10295 REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC,
10296 sc->devinfo.mf_info.path_has_ovlan ? 7 : 6);
10300 ecore_init_block(sc, BLOCK_TSDM, PHASE_COMMON);
10301 ecore_init_block(sc, BLOCK_CSDM, PHASE_COMMON);
10302 ecore_init_block(sc, BLOCK_USDM, PHASE_COMMON);
10303 ecore_init_block(sc, BLOCK_XSDM, PHASE_COMMON);
10305 if (!CHIP_IS_E1x(sc)) {
10306 /* reset VFC memories */
10307 REG_WR(sc, TSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
10308 VFC_MEMORIES_RST_REG_CAM_RST |
10309 VFC_MEMORIES_RST_REG_RAM_RST);
10310 REG_WR(sc, XSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
10311 VFC_MEMORIES_RST_REG_CAM_RST |
10312 VFC_MEMORIES_RST_REG_RAM_RST);
10317 ecore_init_block(sc, BLOCK_TSEM, PHASE_COMMON);
10318 ecore_init_block(sc, BLOCK_USEM, PHASE_COMMON);
10319 ecore_init_block(sc, BLOCK_CSEM, PHASE_COMMON);
10320 ecore_init_block(sc, BLOCK_XSEM, PHASE_COMMON);
10322 /* sync semi rtc */
10323 REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x80000000);
10324 REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x80000000);
10326 ecore_init_block(sc, BLOCK_UPB, PHASE_COMMON);
10327 ecore_init_block(sc, BLOCK_XPB, PHASE_COMMON);
10328 ecore_init_block(sc, BLOCK_PBF, PHASE_COMMON);
10330 if (!CHIP_IS_E1x(sc)) {
10331 if (IS_MF_AFEX(sc)) {
10333 * configure that AFEX and VLAN headers must be
10334 * sent in AFEX mode
10336 REG_WR(sc, PBF_REG_HDRS_AFTER_BASIC, 0xE);
10337 REG_WR(sc, PBF_REG_MUST_HAVE_HDRS, 0xA);
10338 REG_WR(sc, PBF_REG_HDRS_AFTER_TAG_0, 0x6);
10339 REG_WR(sc, PBF_REG_TAG_ETHERTYPE_0, 0x8926);
10340 REG_WR(sc, PBF_REG_TAG_LEN_0, 0x4);
10342 REG_WR(sc, PBF_REG_HDRS_AFTER_BASIC,
10343 sc->devinfo.mf_info.path_has_ovlan ? 7 : 6);
10347 REG_WR(sc, SRC_REG_SOFT_RST, 1);
10349 ecore_init_block(sc, BLOCK_SRC, PHASE_COMMON);
10351 if (CNIC_SUPPORT(sc)) {
10352 REG_WR(sc, SRC_REG_KEYSEARCH_0, 0x63285672);
10353 REG_WR(sc, SRC_REG_KEYSEARCH_1, 0x24b8f2cc);
10354 REG_WR(sc, SRC_REG_KEYSEARCH_2, 0x223aef9b);
10355 REG_WR(sc, SRC_REG_KEYSEARCH_3, 0x26001e3a);
10356 REG_WR(sc, SRC_REG_KEYSEARCH_4, 0x7ae91116);
10357 REG_WR(sc, SRC_REG_KEYSEARCH_5, 0x5ce5230b);
10358 REG_WR(sc, SRC_REG_KEYSEARCH_6, 0x298d8adf);
10359 REG_WR(sc, SRC_REG_KEYSEARCH_7, 0x6eb0ff09);
10360 REG_WR(sc, SRC_REG_KEYSEARCH_8, 0x1830f82f);
10361 REG_WR(sc, SRC_REG_KEYSEARCH_9, 0x01e46be7);
10363 REG_WR(sc, SRC_REG_SOFT_RST, 0);
10365 if (sizeof(union cdu_context) != 1024) {
10366 /* we currently assume that a context is 1024 bytes */
10367 PMD_DRV_LOG(NOTICE,
10368 "please adjust the size of cdu_context(%ld)",
10369 (long)sizeof(union cdu_context));
10372 ecore_init_block(sc, BLOCK_CDU, PHASE_COMMON);
10373 val = (4 << 24) + (0 << 12) + 1024;
10374 REG_WR(sc, CDU_REG_CDU_GLOBAL_PARAMS, val);
10376 ecore_init_block(sc, BLOCK_CFC, PHASE_COMMON);
10378 REG_WR(sc, CFC_REG_INIT_REG, 0x7FF);
10379 /* enable context validation interrupt from CFC */
10380 REG_WR(sc, CFC_REG_CFC_INT_MASK, 0);
10382 /* set the thresholds to prevent CFC/CDU race */
10383 REG_WR(sc, CFC_REG_DEBUG0, 0x20020000);
10384 ecore_init_block(sc, BLOCK_HC, PHASE_COMMON);
10386 if (!CHIP_IS_E1x(sc) && BNX2X_NOMCP(sc)) {
10387 REG_WR(sc, IGU_REG_RESET_MEMORIES, 0x36);
10390 ecore_init_block(sc, BLOCK_IGU, PHASE_COMMON);
10391 ecore_init_block(sc, BLOCK_MISC_AEU, PHASE_COMMON);
10393 /* Reset PCIE errors for debug */
10394 REG_WR(sc, 0x2814, 0xffffffff);
10395 REG_WR(sc, 0x3820, 0xffffffff);
10397 if (!CHIP_IS_E1x(sc)) {
10398 REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_CONTROL_5,
10399 (PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 |
10400 PXPCS_TL_CONTROL_5_ERR_UNSPPORT));
10401 REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_FUNC345_STAT,
10402 (PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 |
10403 PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 |
10404 PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2));
10405 REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_FUNC678_STAT,
10406 (PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 |
10407 PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 |
10408 PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5));
10411 ecore_init_block(sc, BLOCK_NIG, PHASE_COMMON);
10413 /* in E3 this done in per-port section */
10414 if (!CHIP_IS_E3(sc))
10415 REG_WR(sc, NIG_REG_LLH_MF_MODE, IS_MF(sc));
10417 if (CHIP_IS_E1H(sc)) {
10418 /* not applicable for E2 (and above ...) */
10419 REG_WR(sc, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(sc));
10422 if (CHIP_REV_IS_SLOW(sc)) {
10426 /* finish CFC init */
10427 val = reg_poll(sc, CFC_REG_LL_INIT_DONE, 1, 100, 10);
10429 PMD_DRV_LOG(NOTICE, "CFC LL_INIT failed");
10432 val = reg_poll(sc, CFC_REG_AC_INIT_DONE, 1, 100, 10);
10434 PMD_DRV_LOG(NOTICE, "CFC AC_INIT failed");
10437 val = reg_poll(sc, CFC_REG_CAM_INIT_DONE, 1, 100, 10);
10439 PMD_DRV_LOG(NOTICE, "CFC CAM_INIT failed");
10442 REG_WR(sc, CFC_REG_DEBUG0, 0);
10444 bnx2x_setup_fan_failure_detection(sc);
10446 /* clear PXP2 attentions */
10447 REG_RD(sc, PXP2_REG_PXP2_INT_STS_CLR_0);
10449 bnx2x_enable_blocks_attention(sc);
10451 if (!CHIP_REV_IS_SLOW(sc)) {
10452 ecore_enable_blocks_parity(sc);
10455 if (!BNX2X_NOMCP(sc)) {
10456 if (CHIP_IS_E1x(sc)) {
10457 bnx2x_common_init_phy(sc);
10465 * bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase.
10467 * @sc: driver handle
10469 static int bnx2x_init_hw_common_chip(struct bnx2x_softc *sc)
10471 int rc = bnx2x_init_hw_common(sc);
10477 /* In E2 2-PORT mode, same ext phy is used for the two paths */
10478 if (!BNX2X_NOMCP(sc)) {
10479 bnx2x_common_init_phy(sc);
10485 static int bnx2x_init_hw_port(struct bnx2x_softc *sc)
10487 int port = SC_PORT(sc);
10488 int init_phase = port ? PHASE_PORT1 : PHASE_PORT0;
10489 uint32_t low, high;
10492 PMD_DRV_LOG(DEBUG, "starting port init for port %d", port);
10494 REG_WR(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, 0);
10496 ecore_init_block(sc, BLOCK_MISC, init_phase);
10497 ecore_init_block(sc, BLOCK_PXP, init_phase);
10498 ecore_init_block(sc, BLOCK_PXP2, init_phase);
10501 * Timers bug workaround: disables the pf_master bit in pglue at
10502 * common phase, we need to enable it here before any dmae access are
10503 * attempted. Therefore we manually added the enable-master to the
10504 * port phase (it also happens in the function phase)
10506 if (!CHIP_IS_E1x(sc)) {
10507 REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
10510 ecore_init_block(sc, BLOCK_ATC, init_phase);
10511 ecore_init_block(sc, BLOCK_DMAE, init_phase);
10512 ecore_init_block(sc, BLOCK_PGLUE_B, init_phase);
10513 ecore_init_block(sc, BLOCK_QM, init_phase);
10515 ecore_init_block(sc, BLOCK_TCM, init_phase);
10516 ecore_init_block(sc, BLOCK_UCM, init_phase);
10517 ecore_init_block(sc, BLOCK_CCM, init_phase);
10518 ecore_init_block(sc, BLOCK_XCM, init_phase);
10520 /* QM cid (connection) count */
10521 ecore_qm_init_cid_count(sc, sc->qm_cid_count, INITOP_SET);
10523 if (CNIC_SUPPORT(sc)) {
10524 ecore_init_block(sc, BLOCK_TM, init_phase);
10525 REG_WR(sc, TM_REG_LIN0_SCAN_TIME + port * 4, 20);
10526 REG_WR(sc, TM_REG_LIN0_MAX_ACTIVE_CID + port * 4, 31);
10529 ecore_init_block(sc, BLOCK_DORQ, init_phase);
10531 ecore_init_block(sc, BLOCK_BRB1, init_phase);
10533 if (CHIP_IS_E1H(sc)) {
10535 low = (BNX2X_ONE_PORT(sc) ? 160 : 246);
10536 } else if (sc->mtu > 4096) {
10537 if (BNX2X_ONE_PORT(sc)) {
10541 /* (24*1024 + val*4)/256 */
10542 low = (96 + (val / 64) + ((val % 64) ? 1 : 0));
10545 low = (BNX2X_ONE_PORT(sc) ? 80 : 160);
10547 high = (low + 56); /* 14*1024/256 */
10548 REG_WR(sc, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port * 4, low);
10549 REG_WR(sc, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port * 4, high);
10552 if (CHIP_IS_MODE_4_PORT(sc)) {
10553 REG_WR(sc, SC_PORT(sc) ?
10554 BRB1_REG_MAC_GUARANTIED_1 :
10555 BRB1_REG_MAC_GUARANTIED_0, 40);
10558 ecore_init_block(sc, BLOCK_PRS, init_phase);
10559 if (CHIP_IS_E3B0(sc)) {
10560 if (IS_MF_AFEX(sc)) {
10561 /* configure headers for AFEX mode */
10563 REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC_PORT_1,
10565 REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0_PORT_1,
10567 REG_WR(sc, PRS_REG_MUST_HAVE_HDRS_PORT_1, 0xA);
10569 REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC_PORT_0,
10571 REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0_PORT_0,
10573 REG_WR(sc, PRS_REG_MUST_HAVE_HDRS_PORT_0, 0xA);
10576 /* Ovlan exists only if we are in multi-function +
10577 * switch-dependent mode, in switch-independent there
10578 * is no ovlan headers
10580 REG_WR(sc, SC_PORT(sc) ?
10581 PRS_REG_HDRS_AFTER_BASIC_PORT_1 :
10582 PRS_REG_HDRS_AFTER_BASIC_PORT_0,
10583 (sc->devinfo.mf_info.path_has_ovlan ? 7 : 6));
10587 ecore_init_block(sc, BLOCK_TSDM, init_phase);
10588 ecore_init_block(sc, BLOCK_CSDM, init_phase);
10589 ecore_init_block(sc, BLOCK_USDM, init_phase);
10590 ecore_init_block(sc, BLOCK_XSDM, init_phase);
10592 ecore_init_block(sc, BLOCK_TSEM, init_phase);
10593 ecore_init_block(sc, BLOCK_USEM, init_phase);
10594 ecore_init_block(sc, BLOCK_CSEM, init_phase);
10595 ecore_init_block(sc, BLOCK_XSEM, init_phase);
10597 ecore_init_block(sc, BLOCK_UPB, init_phase);
10598 ecore_init_block(sc, BLOCK_XPB, init_phase);
10600 ecore_init_block(sc, BLOCK_PBF, init_phase);
10602 if (CHIP_IS_E1x(sc)) {
10603 /* configure PBF to work without PAUSE mtu 9000 */
10604 REG_WR(sc, PBF_REG_P0_PAUSE_ENABLE + port * 4, 0);
10606 /* update threshold */
10607 REG_WR(sc, PBF_REG_P0_ARB_THRSH + port * 4, (9040 / 16));
10608 /* update init credit */
10609 REG_WR(sc, PBF_REG_P0_INIT_CRD + port * 4,
10610 (9040 / 16) + 553 - 22);
10612 /* probe changes */
10613 REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 1);
10615 REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 0);
10618 if (CNIC_SUPPORT(sc)) {
10619 ecore_init_block(sc, BLOCK_SRC, init_phase);
10622 ecore_init_block(sc, BLOCK_CDU, init_phase);
10623 ecore_init_block(sc, BLOCK_CFC, init_phase);
10624 ecore_init_block(sc, BLOCK_HC, init_phase);
10625 ecore_init_block(sc, BLOCK_IGU, init_phase);
10626 ecore_init_block(sc, BLOCK_MISC_AEU, init_phase);
10627 /* init aeu_mask_attn_func_0/1:
10628 * - SF mode: bits 3-7 are masked. only bits 0-2 are in use
10629 * - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
10630 * bits 4-7 are used for "per vn group attention" */
10631 val = IS_MF(sc) ? 0xF7 : 0x7;
10633 REG_WR(sc, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port * 4, val);
10635 ecore_init_block(sc, BLOCK_NIG, init_phase);
10637 if (!CHIP_IS_E1x(sc)) {
10638 /* Bit-map indicating which L2 hdrs may appear after the
10639 * basic Ethernet header
10641 if (IS_MF_AFEX(sc)) {
10642 REG_WR(sc, SC_PORT(sc) ?
10643 NIG_REG_P1_HDRS_AFTER_BASIC :
10644 NIG_REG_P0_HDRS_AFTER_BASIC, 0xE);
10646 REG_WR(sc, SC_PORT(sc) ?
10647 NIG_REG_P1_HDRS_AFTER_BASIC :
10648 NIG_REG_P0_HDRS_AFTER_BASIC,
10649 IS_MF_SD(sc) ? 7 : 6);
10652 if (CHIP_IS_E3(sc)) {
10653 REG_WR(sc, SC_PORT(sc) ?
10654 NIG_REG_LLH1_MF_MODE :
10655 NIG_REG_LLH_MF_MODE, IS_MF(sc));
10658 if (!CHIP_IS_E3(sc)) {
10659 REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 1);
10662 /* 0x2 disable mf_ov, 0x1 enable */
10663 REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port * 4,
10664 (IS_MF_SD(sc) ? 0x1 : 0x2));
10666 if (!CHIP_IS_E1x(sc)) {
10668 switch (sc->devinfo.mf_info.mf_mode) {
10669 case MULTI_FUNCTION_SD:
10672 case MULTI_FUNCTION_SI:
10673 case MULTI_FUNCTION_AFEX:
10678 REG_WR(sc, (SC_PORT(sc) ? NIG_REG_LLH1_CLS_TYPE :
10679 NIG_REG_LLH0_CLS_TYPE), val);
10681 REG_WR(sc, NIG_REG_LLFC_ENABLE_0 + port * 4, 0);
10682 REG_WR(sc, NIG_REG_LLFC_OUT_EN_0 + port * 4, 0);
10683 REG_WR(sc, NIG_REG_PAUSE_ENABLE_0 + port * 4, 1);
10685 /* If SPIO5 is set to generate interrupts, enable it for this port */
10686 val = REG_RD(sc, MISC_REG_SPIO_EVENT_EN);
10687 if (val & MISC_SPIO_SPIO5) {
10688 uint32_t reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
10689 MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
10690 val = REG_RD(sc, reg_addr);
10691 val |= AEU_INPUTS_ATTN_BITS_SPIO5;
10692 REG_WR(sc, reg_addr, val);
10699 bnx2x_flr_clnup_reg_poll(struct bnx2x_softc *sc, uint32_t reg,
10700 uint32_t expected, uint32_t poll_count)
10702 uint32_t cur_cnt = poll_count;
10705 while ((val = REG_RD(sc, reg)) != expected && cur_cnt--) {
10706 DELAY(FLR_WAIT_INTERVAL);
10713 bnx2x_flr_clnup_poll_hw_counter(struct bnx2x_softc *sc, uint32_t reg,
10714 __rte_unused const char *msg, uint32_t poll_cnt)
10716 uint32_t val = bnx2x_flr_clnup_reg_poll(sc, reg, 0, poll_cnt);
10719 PMD_DRV_LOG(NOTICE, "%s usage count=%d", msg, val);
10726 /* Common routines with VF FLR cleanup */
10727 static uint32_t bnx2x_flr_clnup_poll_count(struct bnx2x_softc *sc)
10729 /* adjust polling timeout */
10730 if (CHIP_REV_IS_EMUL(sc)) {
10731 return FLR_POLL_CNT * 2000;
10734 if (CHIP_REV_IS_FPGA(sc)) {
10735 return FLR_POLL_CNT * 120;
10738 return FLR_POLL_CNT;
10741 static int bnx2x_poll_hw_usage_counters(struct bnx2x_softc *sc, uint32_t poll_cnt)
10743 /* wait for CFC PF usage-counter to zero (includes all the VFs) */
10744 if (bnx2x_flr_clnup_poll_hw_counter(sc,
10745 CFC_REG_NUM_LCIDS_INSIDE_PF,
10746 "CFC PF usage counter timed out",
10751 /* Wait for DQ PF usage-counter to zero (until DQ cleanup) */
10752 if (bnx2x_flr_clnup_poll_hw_counter(sc,
10753 DORQ_REG_PF_USAGE_CNT,
10754 "DQ PF usage counter timed out",
10759 /* Wait for QM PF usage-counter to zero (until DQ cleanup) */
10760 if (bnx2x_flr_clnup_poll_hw_counter(sc,
10761 QM_REG_PF_USG_CNT_0 + 4 * SC_FUNC(sc),
10762 "QM PF usage counter timed out",
10767 /* Wait for Timer PF usage-counters to zero (until DQ cleanup) */
10768 if (bnx2x_flr_clnup_poll_hw_counter(sc,
10769 TM_REG_LIN0_VNIC_UC + 4 * SC_PORT(sc),
10770 "Timers VNIC usage counter timed out",
10775 if (bnx2x_flr_clnup_poll_hw_counter(sc,
10776 TM_REG_LIN0_NUM_SCANS +
10778 "Timers NUM_SCANS usage counter timed out",
10783 /* Wait DMAE PF usage counter to zero */
10784 if (bnx2x_flr_clnup_poll_hw_counter(sc,
10785 dmae_reg_go_c[INIT_DMAE_C(sc)],
10786 "DMAE dommand register timed out",
10794 #define OP_GEN_PARAM(param) \
10795 (((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM)
10796 #define OP_GEN_TYPE(type) \
10797 (((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE)
10798 #define OP_GEN_AGG_VECT(index) \
10799 (((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX)
10802 bnx2x_send_final_clnup(struct bnx2x_softc *sc, uint8_t clnup_func,
10805 uint32_t op_gen_command = 0;
10806 uint32_t comp_addr = (BAR_CSTRORM_INTMEM +
10807 CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func));
10810 if (REG_RD(sc, comp_addr)) {
10811 PMD_DRV_LOG(NOTICE,
10812 "Cleanup complete was not 0 before sending");
10816 op_gen_command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX);
10817 op_gen_command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE);
10818 op_gen_command |= OP_GEN_AGG_VECT(clnup_func);
10819 op_gen_command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT;
10821 REG_WR(sc, XSDM_REG_OPERATION_GEN, op_gen_command);
10823 if (bnx2x_flr_clnup_reg_poll(sc, comp_addr, 1, poll_cnt) != 1) {
10824 PMD_DRV_LOG(NOTICE, "FW final cleanup did not succeed");
10825 PMD_DRV_LOG(DEBUG, "At timeout completion address contained %x",
10826 (REG_RD(sc, comp_addr)));
10827 rte_panic("FLR cleanup failed");
10831 /* Zero completion for nxt FLR */
10832 REG_WR(sc, comp_addr, 0);
10838 bnx2x_pbf_pN_buf_flushed(struct bnx2x_softc *sc, struct pbf_pN_buf_regs *regs,
10839 uint32_t poll_count)
10841 uint32_t init_crd, crd, crd_start, crd_freed, crd_freed_start;
10842 uint32_t cur_cnt = poll_count;
10844 crd_freed = crd_freed_start = REG_RD(sc, regs->crd_freed);
10845 crd = crd_start = REG_RD(sc, regs->crd);
10846 init_crd = REG_RD(sc, regs->init_crd);
10848 while ((crd != init_crd) &&
10849 ((uint32_t) ((int32_t) crd_freed - (int32_t) crd_freed_start) <
10850 (init_crd - crd_start))) {
10852 DELAY(FLR_WAIT_INTERVAL);
10853 crd = REG_RD(sc, regs->crd);
10854 crd_freed = REG_RD(sc, regs->crd_freed);
10862 bnx2x_pbf_pN_cmd_flushed(struct bnx2x_softc *sc, struct pbf_pN_cmd_regs *regs,
10863 uint32_t poll_count)
10865 uint32_t occup, to_free, freed, freed_start;
10866 uint32_t cur_cnt = poll_count;
10868 occup = to_free = REG_RD(sc, regs->lines_occup);
10869 freed = freed_start = REG_RD(sc, regs->lines_freed);
10872 ((uint32_t) ((int32_t) freed - (int32_t) freed_start) <
10875 DELAY(FLR_WAIT_INTERVAL);
10876 occup = REG_RD(sc, regs->lines_occup);
10877 freed = REG_RD(sc, regs->lines_freed);
10884 static void bnx2x_tx_hw_flushed(struct bnx2x_softc *sc, uint32_t poll_count)
10886 struct pbf_pN_cmd_regs cmd_regs[] = {
10887 {0, (CHIP_IS_E3B0(sc)) ?
10888 PBF_REG_TQ_OCCUPANCY_Q0 : PBF_REG_P0_TQ_OCCUPANCY,
10889 (CHIP_IS_E3B0(sc)) ?
10890 PBF_REG_TQ_LINES_FREED_CNT_Q0 : PBF_REG_P0_TQ_LINES_FREED_CNT},
10891 {1, (CHIP_IS_E3B0(sc)) ?
10892 PBF_REG_TQ_OCCUPANCY_Q1 : PBF_REG_P1_TQ_OCCUPANCY,
10893 (CHIP_IS_E3B0(sc)) ?
10894 PBF_REG_TQ_LINES_FREED_CNT_Q1 : PBF_REG_P1_TQ_LINES_FREED_CNT},
10895 {4, (CHIP_IS_E3B0(sc)) ?
10896 PBF_REG_TQ_OCCUPANCY_LB_Q : PBF_REG_P4_TQ_OCCUPANCY,
10897 (CHIP_IS_E3B0(sc)) ?
10898 PBF_REG_TQ_LINES_FREED_CNT_LB_Q :
10899 PBF_REG_P4_TQ_LINES_FREED_CNT}
10902 struct pbf_pN_buf_regs buf_regs[] = {
10903 {0, (CHIP_IS_E3B0(sc)) ?
10904 PBF_REG_INIT_CRD_Q0 : PBF_REG_P0_INIT_CRD,
10905 (CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_Q0 : PBF_REG_P0_CREDIT,
10906 (CHIP_IS_E3B0(sc)) ?
10907 PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 :
10908 PBF_REG_P0_INTERNAL_CRD_FREED_CNT},
10909 {1, (CHIP_IS_E3B0(sc)) ?
10910 PBF_REG_INIT_CRD_Q1 : PBF_REG_P1_INIT_CRD,
10911 (CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_Q1 : PBF_REG_P1_CREDIT,
10912 (CHIP_IS_E3B0(sc)) ?
10913 PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 :
10914 PBF_REG_P1_INTERNAL_CRD_FREED_CNT},
10915 {4, (CHIP_IS_E3B0(sc)) ?
10916 PBF_REG_INIT_CRD_LB_Q : PBF_REG_P4_INIT_CRD,
10917 (CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_LB_Q : PBF_REG_P4_CREDIT,
10918 (CHIP_IS_E3B0(sc)) ?
10919 PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q :
10920 PBF_REG_P4_INTERNAL_CRD_FREED_CNT},
10925 /* Verify the command queues are flushed P0, P1, P4 */
10926 for (i = 0; i < ARRAY_SIZE(cmd_regs); i++) {
10927 bnx2x_pbf_pN_cmd_flushed(sc, &cmd_regs[i], poll_count);
10930 /* Verify the transmission buffers are flushed P0, P1, P4 */
10931 for (i = 0; i < ARRAY_SIZE(buf_regs); i++) {
10932 bnx2x_pbf_pN_buf_flushed(sc, &buf_regs[i], poll_count);
10936 static void bnx2x_hw_enable_status(struct bnx2x_softc *sc)
10938 __rte_unused uint32_t val;
10940 val = REG_RD(sc, CFC_REG_WEAK_ENABLE_PF);
10941 PMD_DRV_LOG(DEBUG, "CFC_REG_WEAK_ENABLE_PF is 0x%x", val);
10943 val = REG_RD(sc, PBF_REG_DISABLE_PF);
10944 PMD_DRV_LOG(DEBUG, "PBF_REG_DISABLE_PF is 0x%x", val);
10946 val = REG_RD(sc, IGU_REG_PCI_PF_MSI_EN);
10947 PMD_DRV_LOG(DEBUG, "IGU_REG_PCI_PF_MSI_EN is 0x%x", val);
10949 val = REG_RD(sc, IGU_REG_PCI_PF_MSIX_EN);
10950 PMD_DRV_LOG(DEBUG, "IGU_REG_PCI_PF_MSIX_EN is 0x%x", val);
10952 val = REG_RD(sc, IGU_REG_PCI_PF_MSIX_FUNC_MASK);
10953 PMD_DRV_LOG(DEBUG, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x", val);
10955 val = REG_RD(sc, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR);
10956 PMD_DRV_LOG(DEBUG, "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x", val);
10958 val = REG_RD(sc, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR);
10959 PMD_DRV_LOG(DEBUG, "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x", val);
10961 val = REG_RD(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER);
10962 PMD_DRV_LOG(DEBUG, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x",
10967 * bnx2x_pf_flr_clnup
10968 * a. re-enable target read on the PF
10969 * b. poll cfc per function usgae counter
10970 * c. poll the qm perfunction usage counter
10971 * d. poll the tm per function usage counter
10972 * e. poll the tm per function scan-done indication
10973 * f. clear the dmae channel associated wit hthe PF
10974 * g. zero the igu 'trailing edge' and 'leading edge' regs (attentions)
10975 * h. call the common flr cleanup code with -1 (pf indication)
10977 static int bnx2x_pf_flr_clnup(struct bnx2x_softc *sc)
10979 uint32_t poll_cnt = bnx2x_flr_clnup_poll_count(sc);
10981 /* Re-enable PF target read access */
10982 REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
10984 /* Poll HW usage counters */
10985 if (bnx2x_poll_hw_usage_counters(sc, poll_cnt)) {
10989 /* Zero the igu 'trailing edge' and 'leading edge' */
10991 /* Send the FW cleanup command */
10992 if (bnx2x_send_final_clnup(sc, (uint8_t) SC_FUNC(sc), poll_cnt)) {
10998 /* Verify TX hw is flushed */
10999 bnx2x_tx_hw_flushed(sc, poll_cnt);
11001 /* Wait 100ms (not adjusted according to platform) */
11004 /* Verify no pending pci transactions */
11005 if (bnx2x_is_pcie_pending(sc)) {
11006 PMD_DRV_LOG(NOTICE, "PCIE Transactions still pending");
11010 bnx2x_hw_enable_status(sc);
11013 * Master enable - Due to WB DMAE writes performed before this
11014 * register is re-initialized as part of the regular function init
11016 REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
11021 static int bnx2x_init_hw_func(struct bnx2x_softc *sc)
11023 int port = SC_PORT(sc);
11024 int func = SC_FUNC(sc);
11025 int init_phase = PHASE_PF0 + func;
11026 struct ecore_ilt *ilt = sc->ilt;
11027 uint16_t cdu_ilt_start;
11028 uint32_t addr, val;
11029 uint32_t main_mem_base, main_mem_size, main_mem_prty_clr;
11030 int main_mem_width, rc;
11033 PMD_DRV_LOG(DEBUG, "starting func init for func %d", func);
11036 if (!CHIP_IS_E1x(sc)) {
11037 rc = bnx2x_pf_flr_clnup(sc);
11039 PMD_DRV_LOG(NOTICE, "FLR cleanup failed!");
11044 /* set MSI reconfigure capability */
11045 if (sc->devinfo.int_block == INT_BLOCK_HC) {
11046 addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0);
11047 val = REG_RD(sc, addr);
11048 val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0;
11049 REG_WR(sc, addr, val);
11052 ecore_init_block(sc, BLOCK_PXP, init_phase);
11053 ecore_init_block(sc, BLOCK_PXP2, init_phase);
11056 cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start;
11058 for (i = 0; i < L2_ILT_LINES(sc); i++) {
11059 ilt->lines[cdu_ilt_start + i].page = sc->context[i].vcxt;
11060 ilt->lines[cdu_ilt_start + i].page_mapping =
11061 (phys_addr_t)sc->context[i].vcxt_dma.paddr;
11062 ilt->lines[cdu_ilt_start + i].size = sc->context[i].size;
11064 ecore_ilt_init_op(sc, INITOP_SET);
11066 REG_WR(sc, PRS_REG_NIC_MODE, 1);
11068 if (!CHIP_IS_E1x(sc)) {
11069 uint32_t pf_conf = IGU_PF_CONF_FUNC_EN;
11071 /* Turn on a single ISR mode in IGU if driver is going to use
11074 if ((sc->interrupt_mode != INTR_MODE_MSIX)
11075 || (sc->interrupt_mode != INTR_MODE_SINGLE_MSIX)) {
11076 pf_conf |= IGU_PF_CONF_SINGLE_ISR_EN;
11080 * Timers workaround bug: function init part.
11081 * Need to wait 20msec after initializing ILT,
11082 * needed to make sure there are no requests in
11083 * one of the PXP internal queues with "old" ILT addresses
11088 * Master enable - Due to WB DMAE writes performed before this
11089 * register is re-initialized as part of the regular function
11092 REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
11093 /* Enable the function in IGU */
11094 REG_WR(sc, IGU_REG_PF_CONFIGURATION, pf_conf);
11097 sc->dmae_ready = 1;
11099 ecore_init_block(sc, BLOCK_PGLUE_B, init_phase);
11101 if (!CHIP_IS_E1x(sc))
11102 REG_WR(sc, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, func);
11104 ecore_init_block(sc, BLOCK_ATC, init_phase);
11105 ecore_init_block(sc, BLOCK_DMAE, init_phase);
11106 ecore_init_block(sc, BLOCK_NIG, init_phase);
11107 ecore_init_block(sc, BLOCK_SRC, init_phase);
11108 ecore_init_block(sc, BLOCK_MISC, init_phase);
11109 ecore_init_block(sc, BLOCK_TCM, init_phase);
11110 ecore_init_block(sc, BLOCK_UCM, init_phase);
11111 ecore_init_block(sc, BLOCK_CCM, init_phase);
11112 ecore_init_block(sc, BLOCK_XCM, init_phase);
11113 ecore_init_block(sc, BLOCK_TSEM, init_phase);
11114 ecore_init_block(sc, BLOCK_USEM, init_phase);
11115 ecore_init_block(sc, BLOCK_CSEM, init_phase);
11116 ecore_init_block(sc, BLOCK_XSEM, init_phase);
11118 if (!CHIP_IS_E1x(sc))
11119 REG_WR(sc, QM_REG_PF_EN, 1);
11121 if (!CHIP_IS_E1x(sc)) {
11122 REG_WR(sc, TSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
11123 REG_WR(sc, USEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
11124 REG_WR(sc, CSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
11125 REG_WR(sc, XSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
11127 ecore_init_block(sc, BLOCK_QM, init_phase);
11129 ecore_init_block(sc, BLOCK_TM, init_phase);
11130 ecore_init_block(sc, BLOCK_DORQ, init_phase);
11132 ecore_init_block(sc, BLOCK_BRB1, init_phase);
11133 ecore_init_block(sc, BLOCK_PRS, init_phase);
11134 ecore_init_block(sc, BLOCK_TSDM, init_phase);
11135 ecore_init_block(sc, BLOCK_CSDM, init_phase);
11136 ecore_init_block(sc, BLOCK_USDM, init_phase);
11137 ecore_init_block(sc, BLOCK_XSDM, init_phase);
11138 ecore_init_block(sc, BLOCK_UPB, init_phase);
11139 ecore_init_block(sc, BLOCK_XPB, init_phase);
11140 ecore_init_block(sc, BLOCK_PBF, init_phase);
11141 if (!CHIP_IS_E1x(sc))
11142 REG_WR(sc, PBF_REG_DISABLE_PF, 0);
11144 ecore_init_block(sc, BLOCK_CDU, init_phase);
11146 ecore_init_block(sc, BLOCK_CFC, init_phase);
11148 if (!CHIP_IS_E1x(sc))
11149 REG_WR(sc, CFC_REG_WEAK_ENABLE_PF, 1);
11152 REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
11153 REG_WR(sc, NIG_REG_LLH0_FUNC_VLAN_ID + port * 8, OVLAN(sc));
11156 ecore_init_block(sc, BLOCK_MISC_AEU, init_phase);
11158 /* HC init per function */
11159 if (sc->devinfo.int_block == INT_BLOCK_HC) {
11160 if (CHIP_IS_E1H(sc)) {
11161 REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
11163 REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, 0);
11164 REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, 0);
11166 ecore_init_block(sc, BLOCK_HC, init_phase);
11169 uint32_t num_segs, sb_idx, prod_offset;
11171 REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
11173 if (!CHIP_IS_E1x(sc)) {
11174 REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, 0);
11175 REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, 0);
11178 ecore_init_block(sc, BLOCK_IGU, init_phase);
11180 if (!CHIP_IS_E1x(sc)) {
11184 * E2 mode: address 0-135 match to the mapping memory;
11185 * 136 - PF0 default prod; 137 - PF1 default prod;
11186 * 138 - PF2 default prod; 139 - PF3 default prod;
11187 * 140 - PF0 attn prod; 141 - PF1 attn prod;
11188 * 142 - PF2 attn prod; 143 - PF3 attn prod;
11189 * 144-147 reserved.
11191 * E1.5 mode - In backward compatible mode;
11192 * for non default SB; each even line in the memory
11193 * holds the U producer and each odd line hold
11194 * the C producer. The first 128 producers are for
11195 * NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20
11196 * producers are for the DSB for each PF.
11197 * Each PF has five segments: (the order inside each
11198 * segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
11199 * 132-135 C prods; 136-139 X prods; 140-143 T prods;
11200 * 144-147 attn prods;
11202 /* non-default-status-blocks */
11203 num_segs = CHIP_INT_MODE_IS_BC(sc) ?
11204 IGU_BC_NDSB_NUM_SEGS : IGU_NORM_NDSB_NUM_SEGS;
11205 for (sb_idx = 0; sb_idx < sc->igu_sb_cnt; sb_idx++) {
11206 prod_offset = (sc->igu_base_sb + sb_idx) *
11209 for (i = 0; i < num_segs; i++) {
11210 addr = IGU_REG_PROD_CONS_MEMORY +
11211 (prod_offset + i) * 4;
11212 REG_WR(sc, addr, 0);
11214 /* send consumer update with value 0 */
11215 bnx2x_ack_sb(sc, sc->igu_base_sb + sb_idx,
11216 USTORM_ID, 0, IGU_INT_NOP, 1);
11217 bnx2x_igu_clear_sb(sc, sc->igu_base_sb + sb_idx);
11220 /* default-status-blocks */
11221 num_segs = CHIP_INT_MODE_IS_BC(sc) ?
11222 IGU_BC_DSB_NUM_SEGS : IGU_NORM_DSB_NUM_SEGS;
11224 if (CHIP_IS_MODE_4_PORT(sc))
11225 dsb_idx = SC_FUNC(sc);
11227 dsb_idx = SC_VN(sc);
11229 prod_offset = (CHIP_INT_MODE_IS_BC(sc) ?
11230 IGU_BC_BASE_DSB_PROD + dsb_idx :
11231 IGU_NORM_BASE_DSB_PROD + dsb_idx);
11234 * igu prods come in chunks of E1HVN_MAX (4) -
11235 * does not matters what is the current chip mode
11237 for (i = 0; i < (num_segs * E1HVN_MAX); i += E1HVN_MAX) {
11238 addr = IGU_REG_PROD_CONS_MEMORY +
11239 (prod_offset + i) * 4;
11240 REG_WR(sc, addr, 0);
11242 /* send consumer update with 0 */
11243 if (CHIP_INT_MODE_IS_BC(sc)) {
11244 bnx2x_ack_sb(sc, sc->igu_dsb_id,
11245 USTORM_ID, 0, IGU_INT_NOP, 1);
11246 bnx2x_ack_sb(sc, sc->igu_dsb_id,
11247 CSTORM_ID, 0, IGU_INT_NOP, 1);
11248 bnx2x_ack_sb(sc, sc->igu_dsb_id,
11249 XSTORM_ID, 0, IGU_INT_NOP, 1);
11250 bnx2x_ack_sb(sc, sc->igu_dsb_id,
11251 TSTORM_ID, 0, IGU_INT_NOP, 1);
11252 bnx2x_ack_sb(sc, sc->igu_dsb_id,
11253 ATTENTION_ID, 0, IGU_INT_NOP, 1);
11255 bnx2x_ack_sb(sc, sc->igu_dsb_id,
11256 USTORM_ID, 0, IGU_INT_NOP, 1);
11257 bnx2x_ack_sb(sc, sc->igu_dsb_id,
11258 ATTENTION_ID, 0, IGU_INT_NOP, 1);
11260 bnx2x_igu_clear_sb(sc, sc->igu_dsb_id);
11262 /* !!! these should become driver const once
11263 rf-tool supports split-68 const */
11264 REG_WR(sc, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0);
11265 REG_WR(sc, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0);
11266 REG_WR(sc, IGU_REG_SB_MASK_LSB, 0);
11267 REG_WR(sc, IGU_REG_SB_MASK_MSB, 0);
11268 REG_WR(sc, IGU_REG_PBA_STATUS_LSB, 0);
11269 REG_WR(sc, IGU_REG_PBA_STATUS_MSB, 0);
11273 /* Reset PCIE errors for debug */
11274 REG_WR(sc, 0x2114, 0xffffffff);
11275 REG_WR(sc, 0x2120, 0xffffffff);
11277 if (CHIP_IS_E1x(sc)) {
11278 main_mem_size = HC_REG_MAIN_MEMORY_SIZE / 2; /*dwords */
11279 main_mem_base = HC_REG_MAIN_MEMORY +
11280 SC_PORT(sc) * (main_mem_size * 4);
11281 main_mem_prty_clr = HC_REG_HC_PRTY_STS_CLR;
11282 main_mem_width = 8;
11284 val = REG_RD(sc, main_mem_prty_clr);
11287 "Parity errors in HC block during function init (0x%x)!",
11291 /* Clear "false" parity errors in MSI-X table */
11292 for (i = main_mem_base;
11293 i < main_mem_base + main_mem_size * 4;
11294 i += main_mem_width) {
11295 bnx2x_read_dmae(sc, i, main_mem_width / 4);
11296 bnx2x_write_dmae(sc, BNX2X_SP_MAPPING(sc, wb_data),
11297 i, main_mem_width / 4);
11299 /* Clear HC parity attention */
11300 REG_RD(sc, main_mem_prty_clr);
11303 /* Enable STORMs SP logging */
11304 REG_WR8(sc, BAR_USTRORM_INTMEM +
11305 USTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
11306 REG_WR8(sc, BAR_TSTRORM_INTMEM +
11307 TSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
11308 REG_WR8(sc, BAR_CSTRORM_INTMEM +
11309 CSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
11310 REG_WR8(sc, BAR_XSTRORM_INTMEM +
11311 XSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
11313 elink_phy_probe(&sc->link_params);
11318 static void bnx2x_link_reset(struct bnx2x_softc *sc)
11320 if (!BNX2X_NOMCP(sc)) {
11321 elink_lfa_reset(&sc->link_params, &sc->link_vars);
11323 if (!CHIP_REV_IS_SLOW(sc)) {
11324 PMD_DRV_LOG(WARNING,
11325 "Bootcode is missing - cannot reset link");
11330 static void bnx2x_reset_port(struct bnx2x_softc *sc)
11332 int port = SC_PORT(sc);
11335 /* reset physical Link */
11336 bnx2x_link_reset(sc);
11338 REG_WR(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, 0);
11340 /* Do not rcv packets to BRB */
11341 REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK + port * 4, 0x0);
11342 /* Do not direct rcv packets that are not for MCP to the BRB */
11343 REG_WR(sc, (port ? NIG_REG_LLH1_BRB1_NOT_MCP :
11344 NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
11346 /* Configure AEU */
11347 REG_WR(sc, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port * 4, 0);
11351 /* Check for BRB port occupancy */
11352 val = REG_RD(sc, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port * 4);
11355 "BRB1 is not empty, %d blocks are occupied", val);
11359 static void bnx2x_ilt_wr(struct bnx2x_softc *sc, uint32_t index, phys_addr_t addr)
11362 uint32_t wb_write[2];
11364 reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index * 8;
11366 wb_write[0] = ONCHIP_ADDR1(addr);
11367 wb_write[1] = ONCHIP_ADDR2(addr);
11368 REG_WR_DMAE(sc, reg, wb_write, 2);
11371 static void bnx2x_clear_func_ilt(struct bnx2x_softc *sc, uint32_t func)
11373 uint32_t i, base = FUNC_ILT_BASE(func);
11374 for (i = base; i < base + ILT_PER_FUNC; i++) {
11375 bnx2x_ilt_wr(sc, i, 0);
11379 static void bnx2x_reset_func(struct bnx2x_softc *sc)
11381 struct bnx2x_fastpath *fp;
11382 int port = SC_PORT(sc);
11383 int func = SC_FUNC(sc);
11386 /* Disable the function in the FW */
11387 REG_WR8(sc, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(func), 0);
11388 REG_WR8(sc, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(func), 0);
11389 REG_WR8(sc, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(func), 0);
11390 REG_WR8(sc, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0);
11393 FOR_EACH_ETH_QUEUE(sc, i) {
11395 REG_WR8(sc, BAR_CSTRORM_INTMEM +
11396 CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp->fw_sb_id),
11401 REG_WR8(sc, BAR_CSTRORM_INTMEM +
11402 CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func), SB_DISABLED);
11404 for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++) {
11405 REG_WR(sc, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func),
11409 /* Configure IGU */
11410 if (sc->devinfo.int_block == INT_BLOCK_HC) {
11411 REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, 0);
11412 REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, 0);
11414 REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, 0);
11415 REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, 0);
11418 if (CNIC_LOADED(sc)) {
11419 /* Disable Timer scan */
11420 REG_WR(sc, TM_REG_EN_LINEAR0_TIMER + port * 4, 0);
11422 * Wait for at least 10ms and up to 2 second for the timers
11425 for (i = 0; i < 200; i++) {
11427 if (!REG_RD(sc, TM_REG_LIN0_SCAN_ON + port * 4))
11433 bnx2x_clear_func_ilt(sc, func);
11436 * Timers workaround bug for E2: if this is vnic-3,
11437 * we need to set the entire ilt range for this timers.
11439 if (!CHIP_IS_E1x(sc) && SC_VN(sc) == 3) {
11440 struct ilt_client_info ilt_cli;
11441 /* use dummy TM client */
11442 memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
11444 ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
11445 ilt_cli.client_num = ILT_CLIENT_TM;
11447 ecore_ilt_boundry_init_op(sc, &ilt_cli, 0);
11450 /* this assumes that reset_port() called before reset_func() */
11451 if (!CHIP_IS_E1x(sc)) {
11452 bnx2x_pf_disable(sc);
11455 sc->dmae_ready = 0;
11458 static void bnx2x_release_firmware(struct bnx2x_softc *sc)
11460 rte_free(sc->init_ops);
11461 rte_free(sc->init_ops_offsets);
11462 rte_free(sc->init_data);
11463 rte_free(sc->iro_array);
11466 static int bnx2x_init_firmware(struct bnx2x_softc *sc)
11469 uint8_t *p = sc->firmware;
11472 for (i = 0; i < 24; ++i)
11473 off[i] = rte_be_to_cpu_32(*((uint32_t *) sc->firmware + i));
11476 sc->init_ops = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
11479 bnx2x_data_to_init_ops(p + off[1], sc->init_ops, len);
11482 sc->init_ops_offsets = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
11483 if (!sc->init_ops_offsets)
11485 bnx2x_data_to_init_offsets(p + off[3], sc->init_ops_offsets, len);
11488 sc->init_data = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
11489 if (!sc->init_data)
11491 bnx2x_data_to_init_data(p + off[5], sc->init_data, len);
11493 sc->tsem_int_table_data = p + off[7];
11494 sc->tsem_pram_data = p + off[9];
11495 sc->usem_int_table_data = p + off[11];
11496 sc->usem_pram_data = p + off[13];
11497 sc->csem_int_table_data = p + off[15];
11498 sc->csem_pram_data = p + off[17];
11499 sc->xsem_int_table_data = p + off[19];
11500 sc->xsem_pram_data = p + off[21];
11503 sc->iro_array = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
11504 if (!sc->iro_array)
11506 bnx2x_data_to_iro_array(p + off[23], sc->iro_array, len);
11511 bnx2x_release_firmware(sc);
11515 static int cut_gzip_prefix(const uint8_t * zbuf, int len)
11517 #define MIN_PREFIX_SIZE (10)
11519 int n = MIN_PREFIX_SIZE;
11522 if (!(zbuf[0] == 0x1f && zbuf[1] == 0x8b && zbuf[2] == Z_DEFLATED) ||
11523 len <= MIN_PREFIX_SIZE) {
11527 /* optional extra fields are present */
11528 if (zbuf[3] & 0x4) {
11535 /* file name is present */
11536 if (zbuf[3] & 0x8) {
11537 while ((zbuf[n++] != 0) && (n < len)) ;
11543 static int ecore_gunzip(struct bnx2x_softc *sc, const uint8_t * zbuf, int len)
11546 int data_begin = cut_gzip_prefix(zbuf, len);
11548 PMD_DRV_LOG(DEBUG, "ecore_gunzip %d", len);
11550 if (data_begin <= 0) {
11551 PMD_DRV_LOG(NOTICE, "bad gzip prefix");
11555 memset(&zlib_stream, 0, sizeof(zlib_stream));
11556 zlib_stream.next_in = zbuf + data_begin;
11557 zlib_stream.avail_in = len - data_begin;
11558 zlib_stream.next_out = sc->gz_buf;
11559 zlib_stream.avail_out = FW_BUF_SIZE;
11561 ret = inflateInit2(&zlib_stream, -MAX_WBITS);
11563 PMD_DRV_LOG(NOTICE, "zlib inflateInit2 error");
11567 ret = inflate(&zlib_stream, Z_FINISH);
11568 if ((ret != Z_STREAM_END) && (ret != Z_OK)) {
11569 PMD_DRV_LOG(NOTICE, "zlib inflate error: %d %s", ret,
11573 sc->gz_outlen = zlib_stream.total_out;
11574 if (sc->gz_outlen & 0x3) {
11575 PMD_DRV_LOG(NOTICE, "firmware is not aligned. gz_outlen == %d",
11578 sc->gz_outlen >>= 2;
11580 inflateEnd(&zlib_stream);
11582 if (ret == Z_STREAM_END)
11589 ecore_write_dmae_phys_len(struct bnx2x_softc *sc, phys_addr_t phys_addr,
11590 uint32_t addr, uint32_t len)
11592 bnx2x_write_dmae_phys_len(sc, phys_addr, addr, len);
11596 ecore_storm_memset_struct(struct bnx2x_softc *sc, uint32_t addr, size_t size,
11600 for (i = 0; i < size / 4; i++) {
11601 REG_WR(sc, addr + (i * 4), data[i]);
11605 static const char *get_ext_phy_type(uint32_t ext_phy_type)
11607 uint32_t phy_type_idx = ext_phy_type >> 8;
11608 static const char *types[] =
11609 { "DIRECT", "BNX2X-8071", "BNX2X-8072", "BNX2X-8073",
11610 "BNX2X-8705", "BNX2X-8706", "BNX2X-8726", "BNX2X-8481", "SFX-7101",
11612 "BNX2X-8727-NOC", "BNX2X-84823", "NOT_CONN", "FAILURE"
11615 if (phy_type_idx < 12)
11616 return types[phy_type_idx];
11617 else if (PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN == ext_phy_type)
11623 static const char *get_state(uint32_t state)
11625 uint32_t state_idx = state >> 12;
11626 static const char *states[] = { "CLOSED", "OPENING_WAIT4_LOAD",
11627 "OPENING_WAIT4_PORT", "OPEN", "CLOSING_WAIT4_HALT",
11628 "CLOSING_WAIT4_DELETE", "CLOSING_WAIT4_UNLOAD",
11629 "UNKNOWN", "UNKNOWN", "UNKNOWN", "UNKNOWN", "UNKNOWN",
11630 "UNKNOWN", "DISABLED", "DIAG", "ERROR", "UNDEFINED"
11633 if (state_idx <= 0xF)
11634 return states[state_idx];
11636 return states[0x10];
11639 static const char *get_recovery_state(uint32_t state)
11641 static const char *states[] = { "NONE", "DONE", "INIT",
11642 "WAIT", "FAILED", "NIC_LOADING"
11644 return states[state];
11647 static const char *get_rx_mode(uint32_t mode)
11649 static const char *modes[] = { "NONE", "NORMAL", "ALLMULTI",
11650 "PROMISC", "MAX_MULTICAST", "ERROR"
11654 return modes[mode];
11655 else if (BNX2X_MAX_MULTICAST == mode)
11661 #define BNX2X_INFO_STR_MAX 256
11662 static const char *get_bnx2x_flags(uint32_t flags)
11665 static const char *flag[] = { "ONE_PORT ", "NO_ISCSI ",
11666 "NO_FCOE ", "NO_WOL ", "USING_DAC ", "USING_MSIX ",
11667 "USING_MSI ", "DISABLE_MSI ", "UNKNOWN ", "NO_MCP ",
11668 "SAFC_TX_FLAG ", "MF_FUNC_DIS ", "TX_SWITCHING "
11670 static char flag_str[BNX2X_INFO_STR_MAX];
11671 memset(flag_str, 0, BNX2X_INFO_STR_MAX);
11673 for (i = 0; i < 5; i++)
11674 if (flags & (1 << i)) {
11675 strcat(flag_str, flag[i]);
11679 static char unknown[BNX2X_INFO_STR_MAX];
11680 snprintf(unknown, 32, "Unknown flag mask %x", flags);
11681 strcat(flag_str, unknown);
11687 * Prints useful adapter info.
11689 void bnx2x_print_adapter_info(struct bnx2x_softc *sc)
11692 __rte_unused uint32_t ext_phy_type;
11694 PMD_INIT_FUNC_TRACE();
11695 if (sc->link_vars.phy_flags & PHY_XGXS_FLAG)
11696 ext_phy_type = ELINK_XGXS_EXT_PHY_TYPE(REG_RD(sc,
11701 dev_info.port_hw_config
11702 [0].external_phy_config)));
11704 ext_phy_type = ELINK_SERDES_EXT_PHY_TYPE(REG_RD(sc,
11710 dev_info.port_hw_config
11711 [0].external_phy_config)));
11713 PMD_INIT_LOG(DEBUG, "\n\n===================================\n");
11714 /* Hardware chip info. */
11715 PMD_INIT_LOG(DEBUG, "%12s : %#08x", "ASIC", sc->devinfo.chip_id);
11716 PMD_INIT_LOG(DEBUG, "%12s : %c%d", "Rev", (CHIP_REV(sc) >> 12) + 'A',
11717 (CHIP_METAL(sc) >> 4));
11720 PMD_INIT_LOG(DEBUG, "%12s : %d, ", "Bus PCIe", sc->devinfo.pcie_link_width);
11721 switch (sc->devinfo.pcie_link_speed) {
11723 PMD_INIT_LOG(DEBUG, "%23s", "2.5 Gbps");
11726 PMD_INIT_LOG(DEBUG, "%21s", "5 Gbps");
11729 PMD_INIT_LOG(DEBUG, "%21s", "8 Gbps");
11732 PMD_INIT_LOG(DEBUG, "%33s", "Unknown link speed");
11735 /* Device features. */
11736 PMD_INIT_LOG(DEBUG, "%12s : ", "Flags");
11738 /* Miscellaneous flags. */
11739 if (sc->devinfo.pcie_cap_flags & BNX2X_MSI_CAPABLE_FLAG) {
11740 PMD_INIT_LOG(DEBUG, "%18s", "MSI");
11744 if (sc->devinfo.pcie_cap_flags & BNX2X_MSIX_CAPABLE_FLAG) {
11746 PMD_INIT_LOG(DEBUG, "|");
11747 PMD_INIT_LOG(DEBUG, "%20s", "MSI-X");
11752 PMD_INIT_LOG(DEBUG, "%12s : ", "Queues");
11753 switch (sc->sp->rss_rdata.rss_mode) {
11754 case ETH_RSS_MODE_DISABLED:
11755 PMD_INIT_LOG(DEBUG, "%19s", "None");
11757 case ETH_RSS_MODE_REGULAR:
11758 PMD_INIT_LOG(DEBUG, "%18s : %d", "RSS", sc->num_queues);
11761 PMD_INIT_LOG(DEBUG, "%22s", "Unknown");
11766 /* RTE and Driver versions */
11767 PMD_INIT_LOG(DEBUG, "%12s : %s", "DPDK",
11769 PMD_INIT_LOG(DEBUG, "%12s : %s", "Driver",
11770 bnx2x_pmd_version());
11772 /* Firmware versions and device features. */
11773 PMD_INIT_LOG(DEBUG, "%12s : %d.%d.%d",
11775 BNX2X_5710_FW_MAJOR_VERSION,
11776 BNX2X_5710_FW_MINOR_VERSION,
11777 BNX2X_5710_FW_REVISION_VERSION);
11778 PMD_INIT_LOG(DEBUG, "%12s : %s",
11779 "Bootcode", sc->devinfo.bc_ver_str);
11781 PMD_INIT_LOG(DEBUG, "\n\n===================================\n");
11782 PMD_INIT_LOG(DEBUG, "%12s : %u", "Bnx2x Func", sc->pcie_func);
11783 PMD_INIT_LOG(DEBUG, "%12s : %s", "Bnx2x Flags", get_bnx2x_flags(sc->flags));
11784 PMD_INIT_LOG(DEBUG, "%12s : %s", "DMAE Is",
11785 (sc->dmae_ready ? "Ready" : "Not Ready"));
11786 PMD_INIT_LOG(DEBUG, "%12s : %s", "OVLAN", (OVLAN(sc) ? "YES" : "NO"));
11787 PMD_INIT_LOG(DEBUG, "%12s : %s", "MF", (IS_MF(sc) ? "YES" : "NO"));
11788 PMD_INIT_LOG(DEBUG, "%12s : %u", "MTU", sc->mtu);
11789 PMD_INIT_LOG(DEBUG, "%12s : %s", "PHY Type", get_ext_phy_type(ext_phy_type));
11790 PMD_INIT_LOG(DEBUG, "%12s : %x:%x:%x:%x:%x:%x", "MAC Addr",
11791 sc->link_params.mac_addr[0],
11792 sc->link_params.mac_addr[1],
11793 sc->link_params.mac_addr[2],
11794 sc->link_params.mac_addr[3],
11795 sc->link_params.mac_addr[4],
11796 sc->link_params.mac_addr[5]);
11797 PMD_INIT_LOG(DEBUG, "%12s : %s", "RX Mode", get_rx_mode(sc->rx_mode));
11798 PMD_INIT_LOG(DEBUG, "%12s : %s", "State", get_state(sc->state));
11799 if (sc->recovery_state)
11800 PMD_INIT_LOG(DEBUG, "%12s : %s", "Recovery",
11801 get_recovery_state(sc->recovery_state));
11802 PMD_INIT_LOG(DEBUG, "%12s : CQ = %lx, EQ = %lx", "SPQ Left",
11803 sc->cq_spq_left, sc->eq_spq_left);
11804 PMD_INIT_LOG(DEBUG, "%12s : %x", "Switch", sc->link_params.switch_cfg);
11805 PMD_INIT_LOG(DEBUG, "\n\n===================================\n");