1 /*******************************************************************************
3 Copyright (c) 2013 - 2015, Intel Corporation
6 Redistribution and use in source and binary forms, with or without
7 modification, are permitted provided that the following conditions are met:
9 1. Redistributions of source code must retain the above copyright notice,
10 this list of conditions and the following disclaimer.
12 2. Redistributions in binary form must reproduce the above copyright
13 notice, this list of conditions and the following disclaimer in the
14 documentation and/or other materials provided with the distribution.
16 3. Neither the name of the Intel Corporation nor the names of its
17 contributors may be used to endorse or promote products derived from
18 this software without specific prior written permission.
20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 POSSIBILITY OF SUCH DAMAGE.
32 ***************************************************************************/
37 * fm10k_stop_hw_vf - Stop Tx/Rx units
38 * @hw: pointer to hardware structure
41 STATIC s32 fm10k_stop_hw_vf(struct fm10k_hw *hw)
43 u8 *perm_addr = hw->mac.perm_addr;
44 u32 bal = 0, bah = 0, tdlen;
48 DEBUGFUNC("fm10k_stop_hw_vf");
50 /* we need to disable the queues before taking further steps */
51 err = fm10k_stop_hw_generic(hw);
55 /* If permanent address is set then we need to restore it */
56 if (FM10K_IS_VALID_ETHER_ADDR(perm_addr)) {
57 bal = (((u32)perm_addr[3]) << 24) |
58 (((u32)perm_addr[4]) << 16) |
59 (((u32)perm_addr[5]) << 8);
60 bah = (((u32)0xFF) << 24) |
61 (((u32)perm_addr[0]) << 16) |
62 (((u32)perm_addr[1]) << 8) |
66 /* restore default itr_scale for next VF initialization */
67 tdlen = hw->mac.itr_scale << FM10K_TDLEN_ITR_SCALE_SHIFT;
69 /* The queues have already been disabled so we just need to
70 * update their base address registers
72 for (i = 0; i < hw->mac.max_queues; i++) {
73 FM10K_WRITE_REG(hw, FM10K_TDBAL(i), bal);
74 FM10K_WRITE_REG(hw, FM10K_TDBAH(i), bah);
75 FM10K_WRITE_REG(hw, FM10K_RDBAL(i), bal);
76 FM10K_WRITE_REG(hw, FM10K_RDBAH(i), bah);
77 FM10K_WRITE_REG(hw, FM10K_TDLEN(i), tdlen);
84 * fm10k_reset_hw_vf - VF hardware reset
85 * @hw: pointer to hardware structure
87 * This function should return the hardware to a state similar to the
88 * one it is in after just being initialized.
90 STATIC s32 fm10k_reset_hw_vf(struct fm10k_hw *hw)
94 DEBUGFUNC("fm10k_reset_hw_vf");
96 /* shut down queues we own and reset DMA configuration */
97 err = fm10k_stop_hw_vf(hw);
101 /* Inititate VF reset */
102 FM10K_WRITE_REG(hw, FM10K_VFCTRL, FM10K_VFCTRL_RST);
104 /* Flush write and allow 100us for reset to complete */
105 FM10K_WRITE_FLUSH(hw);
106 usec_delay(FM10K_RESET_TIMEOUT);
108 /* Clear reset bit and verify it was cleared */
109 FM10K_WRITE_REG(hw, FM10K_VFCTRL, 0);
110 if (FM10K_READ_REG(hw, FM10K_VFCTRL) & FM10K_VFCTRL_RST)
111 err = FM10K_ERR_RESET_FAILED;
117 * fm10k_init_hw_vf - VF hardware initialization
118 * @hw: pointer to hardware structure
121 STATIC s32 fm10k_init_hw_vf(struct fm10k_hw *hw)
123 u32 tqdloc, tqdloc0 = ~FM10K_READ_REG(hw, FM10K_TQDLOC(0));
127 DEBUGFUNC("fm10k_init_hw_vf");
129 /* verify we have at least 1 queue */
130 if (!~FM10K_READ_REG(hw, FM10K_TXQCTL(0)) ||
131 !~FM10K_READ_REG(hw, FM10K_RXQCTL(0)))
132 return FM10K_ERR_NO_RESOURCES;
134 /* determine how many queues we have */
135 for (i = 1; tqdloc0 && (i < FM10K_MAX_QUEUES_POOL); i++) {
136 /* verify the Descriptor cache offsets are increasing */
137 tqdloc = ~FM10K_READ_REG(hw, FM10K_TQDLOC(i));
138 if (!tqdloc || (tqdloc == tqdloc0))
141 /* check to verify the PF doesn't own any of our queues */
142 if (!~FM10K_READ_REG(hw, FM10K_TXQCTL(i)) ||
143 !~FM10K_READ_REG(hw, FM10K_RXQCTL(i)))
147 /* shut down queues we own and reset DMA configuration */
148 err = fm10k_disable_queues_generic(hw, i);
152 /* record maximum queue count */
153 hw->mac.max_queues = i;
155 /* fetch default VLAN and ITR scale */
156 hw->mac.default_vid = (FM10K_READ_REG(hw, FM10K_TXQCTL(0)) &
157 FM10K_TXQCTL_VID_MASK) >> FM10K_TXQCTL_VID_SHIFT;
158 hw->mac.itr_scale = (FM10K_READ_REG(hw, FM10K_TDLEN(0)) &
159 FM10K_TDLEN_ITR_SCALE_MASK) >>
160 FM10K_TDLEN_ITR_SCALE_SHIFT;
162 /* ensure a non-zero itr scale */
163 if (!hw->mac.itr_scale)
164 hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN3;
166 return FM10K_SUCCESS;
170 * fm10k_is_slot_appropriate_vf - Indicate appropriate slot for this SKU
171 * @hw: pointer to hardware structure
173 * Looks at the PCIe bus info to confirm whether or not this slot can support
174 * the necessary bandwidth for this device. Since the VF has no control over
175 * the "slot" it is in, always indicate that the slot is appropriate.
177 STATIC bool fm10k_is_slot_appropriate_vf(struct fm10k_hw *hw)
179 UNREFERENCED_1PARAMETER(hw);
180 DEBUGFUNC("fm10k_is_slot_appropriate_vf");
185 /* This structure defines the attibutes to be parsed below */
186 const struct fm10k_tlv_attr fm10k_mac_vlan_msg_attr[] = {
187 FM10K_TLV_ATTR_U32(FM10K_MAC_VLAN_MSG_VLAN),
188 FM10K_TLV_ATTR_BOOL(FM10K_MAC_VLAN_MSG_SET),
189 FM10K_TLV_ATTR_MAC_ADDR(FM10K_MAC_VLAN_MSG_MAC),
190 FM10K_TLV_ATTR_MAC_ADDR(FM10K_MAC_VLAN_MSG_DEFAULT_MAC),
191 FM10K_TLV_ATTR_MAC_ADDR(FM10K_MAC_VLAN_MSG_MULTICAST),
196 * fm10k_update_vlan_vf - Update status of VLAN ID in VLAN filter table
197 * @hw: pointer to hardware structure
198 * @vid: VLAN ID to add to table
199 * @vsi: Reserved, should always be 0
200 * @set: Indicates if this is a set or clear operation
202 * This function adds or removes the corresponding VLAN ID from the VLAN
203 * filter table for this VF.
205 STATIC s32 fm10k_update_vlan_vf(struct fm10k_hw *hw, u32 vid, u8 vsi, bool set)
207 struct fm10k_mbx_info *mbx = &hw->mbx;
210 /* verify the index is not set */
212 return FM10K_ERR_PARAM;
214 /* verify upper 4 bits of vid and length are 0 */
215 if ((vid << 16 | vid) >> 28)
216 return FM10K_ERR_PARAM;
218 /* encode set bit into the VLAN ID */
220 vid |= FM10K_VLAN_CLEAR;
222 /* generate VLAN request */
223 fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN);
224 fm10k_tlv_attr_put_u32(msg, FM10K_MAC_VLAN_MSG_VLAN, vid);
226 /* load onto outgoing mailbox */
227 return mbx->ops.enqueue_tx(hw, mbx, msg);
231 * fm10k_msg_mac_vlan_vf - Read device MAC address from mailbox message
232 * @hw: pointer to the HW structure
233 * @results: Attributes for message
234 * @mbx: unused mailbox data
236 * This function should determine the MAC address for the VF
238 s32 fm10k_msg_mac_vlan_vf(struct fm10k_hw *hw, u32 **results,
239 struct fm10k_mbx_info *mbx)
241 u8 perm_addr[ETH_ALEN];
245 UNREFERENCED_1PARAMETER(mbx);
246 DEBUGFUNC("fm10k_msg_mac_vlan_vf");
248 /* record MAC address requested */
249 err = fm10k_tlv_attr_get_mac_vlan(
250 results[FM10K_MAC_VLAN_MSG_DEFAULT_MAC],
255 memcpy(hw->mac.perm_addr, perm_addr, ETH_ALEN);
256 hw->mac.default_vid = vid & (FM10K_VLAN_TABLE_VID_MAX - 1);
257 hw->mac.vlan_override = !!(vid & FM10K_VLAN_CLEAR);
259 return FM10K_SUCCESS;
263 * fm10k_read_mac_addr_vf - Read device MAC address
264 * @hw: pointer to the HW structure
266 * This function should determine the MAC address for the VF
268 STATIC s32 fm10k_read_mac_addr_vf(struct fm10k_hw *hw)
270 u8 perm_addr[ETH_ALEN];
273 DEBUGFUNC("fm10k_read_mac_addr_vf");
275 base_addr = FM10K_READ_REG(hw, FM10K_TDBAL(0));
277 /* last byte should be 0 */
279 return FM10K_ERR_INVALID_MAC_ADDR;
281 perm_addr[3] = (u8)(base_addr >> 24);
282 perm_addr[4] = (u8)(base_addr >> 16);
283 perm_addr[5] = (u8)(base_addr >> 8);
285 base_addr = FM10K_READ_REG(hw, FM10K_TDBAH(0));
287 /* first byte should be all 1's */
288 if ((~base_addr) >> 24)
289 return FM10K_ERR_INVALID_MAC_ADDR;
291 perm_addr[0] = (u8)(base_addr >> 16);
292 perm_addr[1] = (u8)(base_addr >> 8);
293 perm_addr[2] = (u8)(base_addr);
295 memcpy(hw->mac.perm_addr, perm_addr, ETH_ALEN);
296 memcpy(hw->mac.addr, perm_addr, ETH_ALEN);
298 return FM10K_SUCCESS;
302 * fm10k_update_uc_addr_vf - Update device unicast addresses
303 * @hw: pointer to the HW structure
305 * @mac: MAC address to add/remove from table
306 * @vid: VLAN ID to add/remove from table
307 * @add: Indicates if this is an add or remove operation
308 * @flags: flags field to indicate add and secure - unused
310 * This function is used to add or remove unicast MAC addresses for
313 STATIC s32 fm10k_update_uc_addr_vf(struct fm10k_hw *hw, u16 glort,
314 const u8 *mac, u16 vid, bool add, u8 flags)
316 struct fm10k_mbx_info *mbx = &hw->mbx;
319 DEBUGFUNC("fm10k_update_uc_addr_vf");
321 UNREFERENCED_2PARAMETER(glort, flags);
323 /* verify VLAN ID is valid */
324 if (vid >= FM10K_VLAN_TABLE_VID_MAX)
325 return FM10K_ERR_PARAM;
327 /* verify MAC address is valid */
328 if (!FM10K_IS_VALID_ETHER_ADDR(mac))
329 return FM10K_ERR_PARAM;
331 /* verify we are not locked down on the MAC address */
332 if (FM10K_IS_VALID_ETHER_ADDR(hw->mac.perm_addr) &&
333 memcmp(hw->mac.perm_addr, mac, ETH_ALEN))
334 return FM10K_ERR_PARAM;
336 /* add bit to notify us if this is a set or clear operation */
338 vid |= FM10K_VLAN_CLEAR;
340 /* generate VLAN request */
341 fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN);
342 fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_MAC, mac, vid);
344 /* load onto outgoing mailbox */
345 return mbx->ops.enqueue_tx(hw, mbx, msg);
349 * fm10k_update_mc_addr_vf - Update device multicast addresses
350 * @hw: pointer to the HW structure
352 * @mac: MAC address to add/remove from table
353 * @vid: VLAN ID to add/remove from table
354 * @add: Indicates if this is an add or remove operation
356 * This function is used to add or remove multicast MAC addresses for
359 STATIC s32 fm10k_update_mc_addr_vf(struct fm10k_hw *hw, u16 glort,
360 const u8 *mac, u16 vid, bool add)
362 struct fm10k_mbx_info *mbx = &hw->mbx;
365 DEBUGFUNC("fm10k_update_uc_addr_vf");
367 UNREFERENCED_1PARAMETER(glort);
369 /* verify VLAN ID is valid */
370 if (vid >= FM10K_VLAN_TABLE_VID_MAX)
371 return FM10K_ERR_PARAM;
373 /* verify multicast address is valid */
374 if (!FM10K_IS_MULTICAST_ETHER_ADDR(mac))
375 return FM10K_ERR_PARAM;
377 /* add bit to notify us if this is a set or clear operation */
379 vid |= FM10K_VLAN_CLEAR;
381 /* generate VLAN request */
382 fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN);
383 fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_MULTICAST,
386 /* load onto outgoing mailbox */
387 return mbx->ops.enqueue_tx(hw, mbx, msg);
391 * fm10k_update_int_moderator_vf - Request update of interrupt moderator list
392 * @hw: pointer to hardware structure
394 * This function will issue a request to the PF to rescan our MSI-X table
395 * and to update the interrupt moderator linked list.
397 STATIC void fm10k_update_int_moderator_vf(struct fm10k_hw *hw)
399 struct fm10k_mbx_info *mbx = &hw->mbx;
402 /* generate MSI-X request */
403 fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MSIX);
405 /* load onto outgoing mailbox */
406 mbx->ops.enqueue_tx(hw, mbx, msg);
409 /* This structure defines the attibutes to be parsed below */
410 const struct fm10k_tlv_attr fm10k_lport_state_msg_attr[] = {
411 FM10K_TLV_ATTR_BOOL(FM10K_LPORT_STATE_MSG_DISABLE),
412 FM10K_TLV_ATTR_U8(FM10K_LPORT_STATE_MSG_XCAST_MODE),
413 FM10K_TLV_ATTR_BOOL(FM10K_LPORT_STATE_MSG_READY),
417 extern const struct fm10k_tlv_attr fm10k_1588_msg_attr[];
420 * fm10k_msg_lport_state_vf - Message handler for lport_state message from PF
421 * @hw: Pointer to hardware structure
422 * @results: pointer array containing parsed data
423 * @mbx: Pointer to mailbox information structure
425 * This handler is meant to capture the indication from the PF that we
426 * are ready to bring up the interface.
428 s32 fm10k_msg_lport_state_vf(struct fm10k_hw *hw, u32 **results,
429 struct fm10k_mbx_info *mbx)
431 UNREFERENCED_1PARAMETER(mbx);
432 DEBUGFUNC("fm10k_msg_lport_state_vf");
434 hw->mac.dglort_map = !results[FM10K_LPORT_STATE_MSG_READY] ?
435 FM10K_DGLORTMAP_NONE : FM10K_DGLORTMAP_ZERO;
437 return FM10K_SUCCESS;
441 * fm10k_update_lport_state_vf - Update device state in lower device
442 * @hw: pointer to the HW structure
444 * @count: number of logical ports to enable - unused (always 1)
445 * @enable: boolean value indicating if this is an enable or disable request
447 * Notify the lower device of a state change. If the lower device is
448 * enabled we can add filters, if it is disabled all filters for this
449 * logical port are flushed.
451 STATIC s32 fm10k_update_lport_state_vf(struct fm10k_hw *hw, u16 glort,
452 u16 count, bool enable)
454 struct fm10k_mbx_info *mbx = &hw->mbx;
457 UNREFERENCED_2PARAMETER(glort, count);
458 DEBUGFUNC("fm10k_update_lport_state_vf");
460 /* reset glort mask 0 as we have to wait to be enabled */
461 hw->mac.dglort_map = FM10K_DGLORTMAP_NONE;
463 /* generate port state request */
464 fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE);
466 fm10k_tlv_attr_put_bool(msg, FM10K_LPORT_STATE_MSG_DISABLE);
468 /* load onto outgoing mailbox */
469 return mbx->ops.enqueue_tx(hw, mbx, msg);
473 * fm10k_update_xcast_mode_vf - Request update of multicast mode
474 * @hw: pointer to hardware structure
476 * @mode: integer value indicating mode being requested
478 * This function will attempt to request a higher mode for the port
479 * so that it can enable either multicast, multicast promiscuous, or
480 * promiscuous mode of operation.
482 STATIC s32 fm10k_update_xcast_mode_vf(struct fm10k_hw *hw, u16 glort, u8 mode)
484 struct fm10k_mbx_info *mbx = &hw->mbx;
487 UNREFERENCED_1PARAMETER(glort);
488 DEBUGFUNC("fm10k_update_xcast_mode_vf");
490 if (mode > FM10K_XCAST_MODE_NONE)
491 return FM10K_ERR_PARAM;
493 /* generate message requesting to change xcast mode */
494 fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE);
495 fm10k_tlv_attr_put_u8(msg, FM10K_LPORT_STATE_MSG_XCAST_MODE, mode);
497 /* load onto outgoing mailbox */
498 return mbx->ops.enqueue_tx(hw, mbx, msg);
501 const struct fm10k_tlv_attr fm10k_1588_msg_attr[] = {
502 FM10K_TLV_ATTR_U64(FM10K_1588_MSG_CLK_OFFSET),
506 /* currently there is no shared 1588 message handler */
509 * fm10k_update_hw_stats_vf - Updates hardware related statistics of VF
510 * @hw: pointer to hardware structure
511 * @stats: pointer to statistics structure
513 * This function collects and aggregates per queue hardware statistics.
515 STATIC void fm10k_update_hw_stats_vf(struct fm10k_hw *hw,
516 struct fm10k_hw_stats *stats)
518 DEBUGFUNC("fm10k_update_hw_stats_vf");
520 fm10k_update_hw_stats_q(hw, stats->q, 0, hw->mac.max_queues);
524 * fm10k_rebind_hw_stats_vf - Resets base for hardware statistics of VF
525 * @hw: pointer to hardware structure
526 * @stats: pointer to the stats structure to update
528 * This function resets the base for queue hardware statistics.
530 STATIC void fm10k_rebind_hw_stats_vf(struct fm10k_hw *hw,
531 struct fm10k_hw_stats *stats)
533 DEBUGFUNC("fm10k_rebind_hw_stats_vf");
535 /* Unbind Queue Statistics */
536 fm10k_unbind_hw_stats_q(stats->q, 0, hw->mac.max_queues);
538 /* Reinitialize bases for all stats */
539 fm10k_update_hw_stats_vf(hw, stats);
543 * fm10k_configure_dglort_map_vf - Configures GLORT entry and queues
544 * @hw: pointer to hardware structure
545 * @dglort: pointer to dglort configuration structure
547 * Reads the configuration structure contained in dglort_cfg and uses
548 * that information to then populate a DGLORTMAP/DEC entry and the queues
549 * to which it has been assigned.
551 STATIC s32 fm10k_configure_dglort_map_vf(struct fm10k_hw *hw,
552 struct fm10k_dglort_cfg *dglort)
554 UNREFERENCED_1PARAMETER(hw);
555 DEBUGFUNC("fm10k_configure_dglort_map_vf");
557 /* verify the dglort pointer */
559 return FM10K_ERR_PARAM;
561 /* stub for now until we determine correct message for this */
563 return FM10K_SUCCESS;
567 * fm10k_adjust_systime_vf - Adjust systime frequency
568 * @hw: pointer to hardware structure
569 * @ppb: adjustment rate in parts per billion
571 * This function takes an adjustment rate in parts per billion and will
572 * verify that this value is 0 as the VF cannot support adjusting the
575 * If the ppb value is non-zero the return is ERR_PARAM else success
577 STATIC s32 fm10k_adjust_systime_vf(struct fm10k_hw *hw, s32 ppb)
579 UNREFERENCED_1PARAMETER(hw);
580 DEBUGFUNC("fm10k_adjust_systime_vf");
582 /* The VF cannot adjust the clock frequency, however it should
583 * already have a syntonic clock with whichever host interface is
584 * running as the master for the host interface clock domain so
585 * there should be not frequency adjustment necessary.
587 return ppb ? FM10K_ERR_PARAM : FM10K_SUCCESS;
591 * fm10k_read_systime_vf - Reads value of systime registers
592 * @hw: pointer to the hardware structure
594 * Function reads the content of 2 registers, combined to represent a 64 bit
595 * value measured in nanoseconds. In order to guarantee the value is accurate
596 * we check the 32 most significant bits both before and after reading the
597 * 32 least significant bits to verify they didn't change as we were reading
600 static u64 fm10k_read_systime_vf(struct fm10k_hw *hw)
602 u32 systime_l, systime_h, systime_tmp;
604 systime_h = fm10k_read_reg(hw, FM10K_VFSYSTIME + 1);
607 systime_tmp = systime_h;
608 systime_l = fm10k_read_reg(hw, FM10K_VFSYSTIME);
609 systime_h = fm10k_read_reg(hw, FM10K_VFSYSTIME + 1);
610 } while (systime_tmp != systime_h);
612 return ((u64)systime_h << 32) | systime_l;
615 static const struct fm10k_msg_data fm10k_msg_data_vf[] = {
616 FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test),
617 FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_msg_mac_vlan_vf),
618 FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_msg_lport_state_vf),
619 FM10K_TLV_MSG_ERROR_HANDLER(fm10k_tlv_msg_error),
623 * fm10k_init_ops_vf - Inits func ptrs and MAC type
624 * @hw: pointer to hardware structure
626 * Initialize the function pointers and assign the MAC type for VF.
627 * Does not touch the hardware.
629 s32 fm10k_init_ops_vf(struct fm10k_hw *hw)
631 struct fm10k_mac_info *mac = &hw->mac;
633 DEBUGFUNC("fm10k_init_ops_vf");
635 fm10k_init_ops_generic(hw);
637 mac->ops.reset_hw = &fm10k_reset_hw_vf;
638 mac->ops.init_hw = &fm10k_init_hw_vf;
639 mac->ops.start_hw = &fm10k_start_hw_generic;
640 mac->ops.stop_hw = &fm10k_stop_hw_vf;
641 mac->ops.is_slot_appropriate = &fm10k_is_slot_appropriate_vf;
642 mac->ops.update_vlan = &fm10k_update_vlan_vf;
643 mac->ops.read_mac_addr = &fm10k_read_mac_addr_vf;
644 mac->ops.update_uc_addr = &fm10k_update_uc_addr_vf;
645 mac->ops.update_mc_addr = &fm10k_update_mc_addr_vf;
646 mac->ops.update_xcast_mode = &fm10k_update_xcast_mode_vf;
647 mac->ops.update_int_moderator = &fm10k_update_int_moderator_vf;
648 mac->ops.update_lport_state = &fm10k_update_lport_state_vf;
649 mac->ops.update_hw_stats = &fm10k_update_hw_stats_vf;
650 mac->ops.rebind_hw_stats = &fm10k_rebind_hw_stats_vf;
651 mac->ops.configure_dglort_map = &fm10k_configure_dglort_map_vf;
652 mac->ops.get_host_state = &fm10k_get_host_state_generic;
653 mac->ops.adjust_systime = &fm10k_adjust_systime_vf;
654 mac->ops.read_systime = &fm10k_read_systime_vf;
656 mac->max_msix_vectors = fm10k_get_pcie_msix_count_generic(hw);
658 return fm10k_pfvf_mbx_init(hw, &hw->mbx, fm10k_msg_data_vf, 0);