4 * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * * Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * * Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * * Neither the name of Intel Corporation nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38 #include <sys/types.h>
40 #include <sys/queue.h>
45 #include <rte_common.h>
46 #include <rte_byteorder.h>
48 #include <rte_memory.h>
49 #include <rte_memcpy.h>
51 #include <rte_launch.h>
52 #include <rte_atomic.h>
53 #include <rte_cycles.h>
54 #include <rte_prefetch.h>
55 #include <rte_lcore.h>
56 #include <rte_per_lcore.h>
57 #include <rte_branch_prediction.h>
58 #include <rte_interrupts.h>
59 #include <rte_random.h>
60 #include <rte_debug.h>
61 #include <rte_ether.h>
62 #include <rte_ethdev.h>
63 #include <rte_mempool.h>
65 #include <rte_malloc.h>
66 #include <rte_fbk_hash.h>
69 #define RTE_LOGTYPE_IPv4_MULTICAST RTE_LOGTYPE_USER1
73 #define MCAST_CLONE_PORTS 2
74 #define MCAST_CLONE_SEGS 2
76 #define PKT_MBUF_DATA_SIZE RTE_MBUF_DEFAULT_BUF_SIZE
77 #define NB_PKT_MBUF 8192
79 #define HDR_MBUF_DATA_SIZE (2 * RTE_PKTMBUF_HEADROOM)
80 #define NB_HDR_MBUF (NB_PKT_MBUF * MAX_PORTS)
82 #define NB_CLONE_MBUF (NB_PKT_MBUF * MCAST_CLONE_PORTS * MCAST_CLONE_SEGS * 2)
84 /* allow max jumbo frame 9.5 KB */
85 #define JUMBO_FRAME_MAX_SIZE 0x2600
87 #define MAX_PKT_BURST 32
88 #define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
90 /* Configure how many packets ahead to prefetch, when reading packets */
91 #define PREFETCH_OFFSET 3
94 * Construct Ethernet multicast address from IPv4 multicast address.
95 * Citing RFC 1112, section 6.4:
96 * "An IP host group address is mapped to an Ethernet multicast address
97 * by placing the low-order 23-bits of the IP address into the low-order
98 * 23 bits of the Ethernet multicast address 01-00-5E-00-00-00 (hex)."
100 #define ETHER_ADDR_FOR_IPV4_MCAST(x) \
101 (rte_cpu_to_be_64(0x01005e000000ULL | ((x) & 0x7fffff)) >> 16)
104 * Configurable number of RX/TX ring descriptors
106 #define RTE_TEST_RX_DESC_DEFAULT 128
107 #define RTE_TEST_TX_DESC_DEFAULT 512
108 static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
109 static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
111 /* ethernet addresses of ports */
112 static struct ether_addr ports_eth_addr[MAX_PORTS];
114 /* mask of enabled ports */
115 static uint32_t enabled_port_mask = 0;
117 static uint16_t nb_ports;
119 static int rx_queue_per_lcore = 1;
123 struct rte_mbuf *m_table[MAX_PKT_BURST];
126 #define MAX_RX_QUEUE_PER_LCORE 16
127 #define MAX_TX_QUEUE_PER_PORT 16
128 struct lcore_queue_conf {
131 uint8_t rx_queue_list[MAX_RX_QUEUE_PER_LCORE];
132 uint16_t tx_queue_id[MAX_PORTS];
133 struct mbuf_table tx_mbufs[MAX_PORTS];
134 } __rte_cache_aligned;
135 static struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
137 static struct rte_eth_conf port_conf = {
139 .max_rx_pkt_len = JUMBO_FRAME_MAX_SIZE,
141 .header_split = 0, /**< Header Split disabled */
142 .hw_ip_checksum = 0, /**< IP checksum offload disabled */
143 .hw_vlan_filter = 0, /**< VLAN filtering disabled */
144 .jumbo_frame = 1, /**< Jumbo Frame Support enabled */
145 .hw_strip_crc = 1, /**< CRC stripped by hardware */
148 .mq_mode = ETH_MQ_TX_NONE,
152 static struct rte_mempool *packet_pool, *header_pool, *clone_pool;
156 static struct rte_fbk_hash_params mcast_hash_params = {
157 .name = "MCAST_HASH",
159 .entries_per_bucket = 4,
165 struct rte_fbk_hash_table *mcast_hash = NULL;
167 struct mcast_group_params {
172 static struct mcast_group_params mcast_group_table[] = {
173 {IPv4(224,0,0,101), 0x1},
174 {IPv4(224,0,0,102), 0x2},
175 {IPv4(224,0,0,103), 0x3},
176 {IPv4(224,0,0,104), 0x4},
177 {IPv4(224,0,0,105), 0x5},
178 {IPv4(224,0,0,106), 0x6},
179 {IPv4(224,0,0,107), 0x7},
180 {IPv4(224,0,0,108), 0x8},
181 {IPv4(224,0,0,109), 0x9},
182 {IPv4(224,0,0,110), 0xA},
183 {IPv4(224,0,0,111), 0xB},
184 {IPv4(224,0,0,112), 0xC},
185 {IPv4(224,0,0,113), 0xD},
186 {IPv4(224,0,0,114), 0xE},
187 {IPv4(224,0,0,115), 0xF},
190 #define N_MCAST_GROUPS \
191 (sizeof (mcast_group_table) / sizeof (mcast_group_table[0]))
194 /* Send burst of packets on an output interface */
196 send_burst(struct lcore_queue_conf *qconf, uint16_t port)
198 struct rte_mbuf **m_table;
202 queueid = qconf->tx_queue_id[port];
203 m_table = (struct rte_mbuf **)qconf->tx_mbufs[port].m_table;
204 n = qconf->tx_mbufs[port].len;
206 ret = rte_eth_tx_burst(port, queueid, m_table, n);
207 while (unlikely (ret < n)) {
208 rte_pktmbuf_free(m_table[ret]);
212 qconf->tx_mbufs[port].len = 0;
215 /* Get number of bits set. */
216 static inline uint32_t
221 for (n = 0; v != 0; v &= v - 1, n++)
228 * Create the output multicast packet based on the given input packet.
229 * There are two approaches for creating outgoing packet, though both
230 * are based on data zero-copy idea, they differ in few details:
231 * First one creates a clone of the input packet, e.g - walk though all
232 * segments of the input packet, and for each of them create a new packet
233 * mbuf and attach that new mbuf to the segment (refer to rte_pktmbuf_clone()
234 * for more details). Then new mbuf is allocated for the packet header
235 * and is prepended to the 'clone' mbuf.
236 * Second approach doesn't make a clone, it just increment refcnt for all
237 * input packet segments. Then it allocates new mbuf for the packet header
238 * and prepends it to the input packet.
239 * Basically first approach reuses only input packet's data, but creates
240 * it's own copy of packet's metadata. Second approach reuses both input's
241 * packet data and metadata.
242 * The advantage of first approach - is that each outgoing packet has it's
243 * own copy of metadata, so we can safely modify data pointer of the
244 * input packet. That allows us to skip creation if the output packet for
245 * the last destination port, but instead modify input packet's header inplace,
246 * e.g: for N destination ports we need to invoke mcast_out_pkt (N-1) times.
247 * The advantage of second approach - less work for each outgoing packet,
248 * e.g: we skip "clone" operation completely. Though it comes with a price -
249 * input packet's metadata has to be intact. So for N destination ports we
250 * need to invoke mcast_out_pkt N times.
251 * So for small number of outgoing ports (and segments in the input packet)
252 * first approach will be faster.
253 * As number of outgoing ports (and/or input segments) will grow,
254 * second way will become more preferable.
259 * Control which of the two approaches described above should be used:
260 * - 0 - use second approach:
261 * Don't "clone" input packet.
262 * Prepend new header directly to the input packet
263 * - 1 - use first approach:
264 * Make a "clone" of input packet first.
265 * Prepend new header to the clone of the input packet
267 * - The pointer to the new outgoing packet.
268 * - NULL if operation failed.
270 static inline struct rte_mbuf *
271 mcast_out_pkt(struct rte_mbuf *pkt, int use_clone)
273 struct rte_mbuf *hdr;
275 /* Create new mbuf for the header. */
276 if (unlikely ((hdr = rte_pktmbuf_alloc(header_pool)) == NULL))
279 /* If requested, then make a new clone packet. */
280 if (use_clone != 0 &&
281 unlikely ((pkt = rte_pktmbuf_clone(pkt, clone_pool)) == NULL)) {
282 rte_pktmbuf_free(hdr);
286 /* prepend new header */
290 /* update header's fields */
291 hdr->pkt_len = (uint16_t)(hdr->data_len + pkt->pkt_len);
292 hdr->nb_segs = pkt->nb_segs + 1;
294 /* copy metadata from source packet*/
295 hdr->port = pkt->port;
296 hdr->vlan_tci = pkt->vlan_tci;
297 hdr->vlan_tci_outer = pkt->vlan_tci_outer;
298 hdr->tx_offload = pkt->tx_offload;
299 hdr->hash = pkt->hash;
301 hdr->ol_flags = pkt->ol_flags;
303 __rte_mbuf_sanity_check(hdr, 1);
308 * Write new Ethernet header to the outgoing packet,
309 * and put it into the outgoing queue for the given port.
312 mcast_send_pkt(struct rte_mbuf *pkt, struct ether_addr *dest_addr,
313 struct lcore_queue_conf *qconf, uint16_t port)
315 struct ether_hdr *ethdr;
318 /* Construct Ethernet header. */
319 ethdr = (struct ether_hdr *)rte_pktmbuf_prepend(pkt, (uint16_t)sizeof(*ethdr));
320 RTE_ASSERT(ethdr != NULL);
322 ether_addr_copy(dest_addr, ðdr->d_addr);
323 ether_addr_copy(&ports_eth_addr[port], ðdr->s_addr);
324 ethdr->ether_type = rte_be_to_cpu_16(ETHER_TYPE_IPv4);
326 /* Put new packet into the output queue */
327 len = qconf->tx_mbufs[port].len;
328 qconf->tx_mbufs[port].m_table[len] = pkt;
329 qconf->tx_mbufs[port].len = ++len;
331 /* Transmit packets */
332 if (unlikely(MAX_PKT_BURST == len))
333 send_burst(qconf, port);
336 /* Multicast forward of the input packet */
338 mcast_forward(struct rte_mbuf *m, struct lcore_queue_conf *qconf)
341 struct ipv4_hdr *iphdr;
342 uint32_t dest_addr, port_mask, port_num, use_clone;
347 struct ether_addr as_addr;
350 /* Remove the Ethernet header from the input packet */
351 iphdr = (struct ipv4_hdr *)rte_pktmbuf_adj(m, (uint16_t)sizeof(struct ether_hdr));
352 RTE_ASSERT(iphdr != NULL);
354 dest_addr = rte_be_to_cpu_32(iphdr->dst_addr);
357 * Check that it is a valid multicast address and
358 * we have some active ports assigned to it.
360 if(!IS_IPV4_MCAST(dest_addr) ||
361 (hash = rte_fbk_hash_lookup(mcast_hash, dest_addr)) <= 0 ||
362 (port_mask = hash & enabled_port_mask) == 0) {
367 /* Calculate number of destination ports. */
368 port_num = bitcnt(port_mask);
370 /* Should we use rte_pktmbuf_clone() or not. */
371 use_clone = (port_num <= MCAST_CLONE_PORTS &&
372 m->nb_segs <= MCAST_CLONE_SEGS);
374 /* Mark all packet's segments as referenced port_num times */
376 rte_pktmbuf_refcnt_update(m, (uint16_t)port_num);
378 /* construct destination ethernet address */
379 dst_eth_addr.as_int = ETHER_ADDR_FOR_IPV4_MCAST(dest_addr);
381 for (port = 0; use_clone != port_mask; port_mask >>= 1, port++) {
383 /* Prepare output packet and send it out. */
384 if ((port_mask & 1) != 0) {
385 if (likely ((mc = mcast_out_pkt(m, use_clone)) != NULL))
386 mcast_send_pkt(mc, &dst_eth_addr.as_addr,
388 else if (use_clone == 0)
394 * If we making clone packets, then, for the last destination port,
395 * we can overwrite input packet's metadata.
398 mcast_send_pkt(m, &dst_eth_addr.as_addr, qconf, port);
403 /* Send burst of outgoing packet, if timeout expires. */
405 send_timeout_burst(struct lcore_queue_conf *qconf)
409 const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
411 cur_tsc = rte_rdtsc();
412 if (likely (cur_tsc < qconf->tx_tsc + drain_tsc))
415 for (portid = 0; portid < MAX_PORTS; portid++) {
416 if (qconf->tx_mbufs[portid].len != 0)
417 send_burst(qconf, portid);
419 qconf->tx_tsc = cur_tsc;
422 /* main processing loop */
424 main_loop(__rte_unused void *dummy)
426 struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
430 struct lcore_queue_conf *qconf;
432 lcore_id = rte_lcore_id();
433 qconf = &lcore_queue_conf[lcore_id];
436 if (qconf->n_rx_queue == 0) {
437 RTE_LOG(INFO, IPv4_MULTICAST, "lcore %u has nothing to do\n",
442 RTE_LOG(INFO, IPv4_MULTICAST, "entering main loop on lcore %u\n",
445 for (i = 0; i < qconf->n_rx_queue; i++) {
447 portid = qconf->rx_queue_list[i];
448 RTE_LOG(INFO, IPv4_MULTICAST, " -- lcoreid=%u portid=%d\n",
455 * Read packet from RX queues
457 for (i = 0; i < qconf->n_rx_queue; i++) {
459 portid = qconf->rx_queue_list[i];
460 nb_rx = rte_eth_rx_burst(portid, 0, pkts_burst,
463 /* Prefetch first packets */
464 for (j = 0; j < PREFETCH_OFFSET && j < nb_rx; j++) {
465 rte_prefetch0(rte_pktmbuf_mtod(
466 pkts_burst[j], void *));
469 /* Prefetch and forward already prefetched packets */
470 for (j = 0; j < (nb_rx - PREFETCH_OFFSET); j++) {
471 rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[
472 j + PREFETCH_OFFSET], void *));
473 mcast_forward(pkts_burst[j], qconf);
476 /* Forward remaining prefetched packets */
477 for (; j < nb_rx; j++) {
478 mcast_forward(pkts_burst[j], qconf);
482 /* Send out packets from TX queues */
483 send_timeout_burst(qconf);
489 print_usage(const char *prgname)
491 printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
492 " -p PORTMASK: hexadecimal bitmask of ports to configure\n"
493 " -q NQ: number of queue (=ports) per lcore (default is 1)\n",
498 parse_portmask(const char *portmask)
503 /* parse hexadecimal string */
504 pm = strtoul(portmask, &end, 16);
505 if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
512 parse_nqueue(const char *q_arg)
517 /* parse numerical string */
519 n = strtoul(q_arg, &end, 0);
520 if (errno != 0 || end == NULL || *end != '\0' ||
521 n == 0 || n >= MAX_RX_QUEUE_PER_LCORE)
527 /* Parse the argument given in the command line of the application */
529 parse_args(int argc, char **argv)
534 char *prgname = argv[0];
535 static struct option lgopts[] = {
541 while ((opt = getopt_long(argc, argvopt, "p:q:",
542 lgopts, &option_index)) != EOF) {
547 enabled_port_mask = parse_portmask(optarg);
548 if (enabled_port_mask == 0) {
549 printf("invalid portmask\n");
550 print_usage(prgname);
557 rx_queue_per_lcore = parse_nqueue(optarg);
558 if (rx_queue_per_lcore < 0) {
559 printf("invalid queue number\n");
560 print_usage(prgname);
566 print_usage(prgname);
572 argv[optind-1] = prgname;
575 optind = 1; /* reset getopt lib */
580 print_ethaddr(const char *name, struct ether_addr *eth_addr)
582 char buf[ETHER_ADDR_FMT_SIZE];
583 ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
584 printf("%s%s", name, buf);
588 init_mcast_hash(void)
592 mcast_hash_params.socket_id = rte_socket_id();
593 mcast_hash = rte_fbk_hash_create(&mcast_hash_params);
594 if (mcast_hash == NULL){
598 for (i = 0; i < N_MCAST_GROUPS; i ++){
599 if (rte_fbk_hash_add_key(mcast_hash,
600 mcast_group_table[i].ip,
601 mcast_group_table[i].port_mask) < 0) {
609 /* Check the link status of all ports in up to 9s, and print them finally */
611 check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
613 #define CHECK_INTERVAL 100 /* 100ms */
614 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
616 uint8_t count, all_ports_up, print_flag = 0;
617 struct rte_eth_link link;
619 printf("\nChecking link status");
621 for (count = 0; count <= MAX_CHECK_TIME; count++) {
623 for (portid = 0; portid < port_num; portid++) {
624 if ((port_mask & (1 << portid)) == 0)
626 memset(&link, 0, sizeof(link));
627 rte_eth_link_get_nowait(portid, &link);
628 /* print link status if flag set */
629 if (print_flag == 1) {
630 if (link.link_status)
632 "Port%d Link Up. Speed %u Mbps - %s\n",
633 portid, link.link_speed,
634 (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
635 ("full-duplex") : ("half-duplex\n"));
637 printf("Port %d Link Down\n", portid);
640 /* clear all_ports_up flag if any link down */
641 if (link.link_status == ETH_LINK_DOWN) {
646 /* after finally printing all link status, get out */
650 if (all_ports_up == 0) {
653 rte_delay_ms(CHECK_INTERVAL);
656 /* set the print_flag if all ports up or timeout */
657 if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
665 main(int argc, char **argv)
667 struct lcore_queue_conf *qconf;
668 struct rte_eth_dev_info dev_info;
669 struct rte_eth_txconf *txconf;
672 unsigned lcore_id = 0, rx_lcore_id = 0;
673 uint32_t n_tx_queue, nb_lcores;
677 ret = rte_eal_init(argc, argv);
679 rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n");
683 /* parse application arguments (after the EAL ones) */
684 ret = parse_args(argc, argv);
686 rte_exit(EXIT_FAILURE, "Invalid IPV4_MULTICAST parameters\n");
688 /* create the mbuf pools */
689 packet_pool = rte_pktmbuf_pool_create("packet_pool", NB_PKT_MBUF, 32,
690 0, PKT_MBUF_DATA_SIZE, rte_socket_id());
692 if (packet_pool == NULL)
693 rte_exit(EXIT_FAILURE, "Cannot init packet mbuf pool\n");
695 header_pool = rte_pktmbuf_pool_create("header_pool", NB_HDR_MBUF, 32,
696 0, HDR_MBUF_DATA_SIZE, rte_socket_id());
698 if (header_pool == NULL)
699 rte_exit(EXIT_FAILURE, "Cannot init header mbuf pool\n");
701 clone_pool = rte_pktmbuf_pool_create("clone_pool", NB_CLONE_MBUF, 32,
702 0, 0, rte_socket_id());
704 if (clone_pool == NULL)
705 rte_exit(EXIT_FAILURE, "Cannot init clone mbuf pool\n");
707 nb_ports = rte_eth_dev_count();
709 rte_exit(EXIT_FAILURE, "No physical ports!\n");
710 if (nb_ports > MAX_PORTS)
711 nb_ports = MAX_PORTS;
713 nb_lcores = rte_lcore_count();
715 /* initialize all ports */
716 for (portid = 0; portid < nb_ports; portid++) {
717 /* skip ports that are not enabled */
718 if ((enabled_port_mask & (1 << portid)) == 0) {
719 printf("Skipping disabled port %d\n", portid);
723 qconf = &lcore_queue_conf[rx_lcore_id];
725 /* limit the frame size to the maximum supported by NIC */
726 rte_eth_dev_info_get(portid, &dev_info);
727 port_conf.rxmode.max_rx_pkt_len = RTE_MIN(
728 dev_info.max_rx_pktlen, port_conf.rxmode.max_rx_pkt_len);
730 /* get the lcore_id for this port */
731 while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
732 qconf->n_rx_queue == (unsigned)rx_queue_per_lcore) {
735 qconf = &lcore_queue_conf[rx_lcore_id];
737 if (rx_lcore_id >= RTE_MAX_LCORE)
738 rte_exit(EXIT_FAILURE, "Not enough cores\n");
740 qconf->rx_queue_list[qconf->n_rx_queue] = portid;
744 printf("Initializing port %d on lcore %u... ", portid,
748 n_tx_queue = nb_lcores;
749 if (n_tx_queue > MAX_TX_QUEUE_PER_PORT)
750 n_tx_queue = MAX_TX_QUEUE_PER_PORT;
751 ret = rte_eth_dev_configure(portid, 1, (uint16_t)n_tx_queue,
754 rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%d\n",
757 ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
760 rte_exit(EXIT_FAILURE,
761 "Cannot adjust number of descriptors: err=%d, port=%d\n",
764 rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
765 print_ethaddr(" Address:", &ports_eth_addr[portid]);
768 /* init one RX queue */
770 printf("rxq=%hu ", queueid);
772 ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
773 rte_eth_dev_socket_id(portid),
777 rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, port=%d\n",
780 /* init one TX queue per couple (lcore,port) */
783 RTE_LCORE_FOREACH(lcore_id) {
784 if (rte_lcore_is_enabled(lcore_id) == 0)
786 printf("txq=%u,%hu ", lcore_id, queueid);
789 txconf = &dev_info.default_txconf;
790 txconf->txq_flags = 0;
791 ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
792 rte_lcore_to_socket_id(lcore_id), txconf);
794 rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, "
795 "port=%d\n", ret, portid);
797 qconf = &lcore_queue_conf[lcore_id];
798 qconf->tx_queue_id[portid] = queueid;
803 ret = rte_eth_dev_start(portid);
805 rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, port=%d\n",
811 check_all_ports_link_status(nb_ports, enabled_port_mask);
813 /* initialize the multicast hash */
814 int retval = init_mcast_hash();
816 rte_exit(EXIT_FAILURE, "Cannot build the multicast hash\n");
818 /* launch per-lcore init on every lcore */
819 rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
820 RTE_LCORE_FOREACH_SLAVE(lcore_id) {
821 if (rte_eal_wait_lcore(lcore_id) < 0)