4 * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * * Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * * Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * * Neither the name of Intel Corporation nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
37 #include <rte_ethdev.h>
38 #include <rte_cycles.h>
39 #include <rte_lcore.h>
42 #define RX_RING_SIZE 128
43 #define TX_RING_SIZE 512
45 #define NUM_MBUFS 8191
46 #define MBUF_SIZE (1600 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
47 #define MBUF_CACHE_SIZE 250
50 static const struct rte_eth_conf port_conf_default = {
51 .rxmode = { .max_rx_pkt_len = ETHER_MAX_LEN }
54 /* basicfwd.c: Basic DPDK skeleton forwarding example. */
57 * Initializes a given port using global settings and with the RX buffers
58 * coming from the mbuf_pool passed as a parameter.
61 port_init(uint8_t port, struct rte_mempool *mbuf_pool)
63 struct rte_eth_conf port_conf = port_conf_default;
64 const uint16_t rx_rings = 1, tx_rings = 1;
68 if (port >= rte_eth_dev_count())
71 /* Configure the Ethernet device. */
72 retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
76 /* Allocate and set up 1 RX queue per Ethernet port. */
77 for (q = 0; q < rx_rings; q++) {
78 retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
79 rte_eth_dev_socket_id(port), NULL, mbuf_pool);
84 /* Allocate and set up 1 TX queue per Ethernet port. */
85 for (q = 0; q < tx_rings; q++) {
86 retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
87 rte_eth_dev_socket_id(port), NULL);
92 /* Start the Ethernet port. */
93 retval = rte_eth_dev_start(port);
97 /* Display the port MAC address. */
98 struct ether_addr addr;
99 rte_eth_macaddr_get(port, &addr);
100 printf("Port %u MAC: %02" PRIx8 " %02" PRIx8 " %02" PRIx8
101 " %02" PRIx8 " %02" PRIx8 " %02" PRIx8 "\n",
103 addr.addr_bytes[0], addr.addr_bytes[1],
104 addr.addr_bytes[2], addr.addr_bytes[3],
105 addr.addr_bytes[4], addr.addr_bytes[5]);
107 /* Enable RX in promiscuous mode for the Ethernet device. */
108 rte_eth_promiscuous_enable(port);
114 * The lcore main. This is the main thread that does the work, reading from
115 * an input port and writing to an output port.
117 static __attribute__((noreturn)) void
120 const uint8_t nb_ports = rte_eth_dev_count();
124 * Check that the port is on the same NUMA node as the polling thread
125 * for best performance.
127 for (port = 0; port < nb_ports; port++)
128 if (rte_eth_dev_socket_id(port) > 0 &&
129 rte_eth_dev_socket_id(port) !=
130 (int)rte_socket_id())
131 printf("WARNING, port %u is on remote NUMA node to "
132 "polling thread.\n\tPerformance will "
133 "not be optimal.\n", port);
135 printf("\nCore %u forwarding packets. [Ctrl+C to quit]\n",
138 /* Run until the application is quit or killed. */
141 * Receive packets on a port and forward them on the paired
142 * port. The mapping is 0 -> 1, 1 -> 0, 2 -> 3, 3 -> 2, etc.
144 for (port = 0; port < nb_ports; port++) {
146 /* Get burst of RX packets, from first port of pair. */
147 struct rte_mbuf *bufs[BURST_SIZE];
148 const uint16_t nb_rx = rte_eth_rx_burst(port, 0,
151 if (unlikely(nb_rx == 0))
154 /* Send burst of TX packets, to second port of pair. */
155 const uint16_t nb_tx = rte_eth_tx_burst(port ^ 1, 0,
158 /* Free any unsent packets. */
159 if (unlikely(nb_tx < nb_rx)) {
161 for (buf = nb_tx; buf < nb_rx; buf++)
162 rte_pktmbuf_free(bufs[buf]);
169 * The main function, which does initialization and calls the per-lcore
173 main(int argc, char *argv[])
175 struct rte_mempool *mbuf_pool;
179 /* Initialize the Environment Abstraction Layer (EAL). */
180 int ret = rte_eal_init(argc, argv);
182 rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
187 /* Check that there is an even number of ports to send/receive on. */
188 nb_ports = rte_eth_dev_count();
189 if (nb_ports < 2 || (nb_ports & 1))
190 rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n");
192 /* Creates a new mempool in memory to hold the mbufs. */
193 mbuf_pool = rte_mempool_create("MBUF_POOL",
194 NUM_MBUFS * nb_ports,
197 sizeof(struct rte_pktmbuf_pool_private),
198 rte_pktmbuf_pool_init, NULL,
199 rte_pktmbuf_init, NULL,
203 if (mbuf_pool == NULL)
204 rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
206 /* Initialize all ports. */
207 for (portid = 0; portid < nb_ports; portid++)
208 if (port_init(portid, mbuf_pool) != 0)
209 rte_exit(EXIT_FAILURE, "Cannot init port %"PRIu8 "\n",
212 if (rte_lcore_count() > 1)
213 printf("\nWARNING: Too many lcores enabled. Only 1 used.\n");
215 /* Call lcore_main on the master core only. */