4 * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
5 * Copyright(c) 2012-2014 6WIND S.A.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
12 * * Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * * Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in
16 * the documentation and/or other materials provided with the
18 * * Neither the name of Intel Corporation nor the names of its
19 * contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
24 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
25 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
26 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
27 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
28 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
29 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
30 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
32 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
52 #include <sys/queue.h>
55 #include <rte_common.h>
56 #include <rte_debug.h>
57 #include <rte_memory.h>
58 #include <rte_memzone.h>
59 #include <rte_launch.h>
60 #include <rte_tailq.h>
62 #include <rte_eal_memconfig.h>
63 #include <rte_per_lcore.h>
64 #include <rte_lcore.h>
66 #include <rte_random.h>
67 #include <rte_cycles.h>
68 #include <rte_string_fns.h>
69 #include <rte_cpuflags.h>
70 #include <rte_interrupts.h>
72 #include <rte_devargs.h>
73 #include <rte_common.h>
74 #include <rte_version.h>
75 #include <rte_atomic.h>
76 #include <malloc_heap.h>
77 #include <rte_eth_ring.h>
80 #include "eal_private.h"
81 #include "eal_thread.h"
82 #include "eal_internal_cfg.h"
83 #include "eal_filesystem.h"
84 #include "eal_hugepages.h"
86 #define OPT_HUGE_DIR "huge-dir"
87 #define OPT_PROC_TYPE "proc-type"
88 #define OPT_NO_SHCONF "no-shconf"
89 #define OPT_NO_HPET "no-hpet"
90 #define OPT_VMWARE_TSC_MAP "vmware-tsc-map"
91 #define OPT_NO_PCI "no-pci"
92 #define OPT_NO_HUGE "no-huge"
93 #define OPT_FILE_PREFIX "file-prefix"
94 #define OPT_SOCKET_MEM "socket-mem"
95 #define OPT_USE_DEVICE "use-device"
96 #define OPT_PCI_WHITELIST "pci-whitelist"
97 #define OPT_PCI_BLACKLIST "pci-blacklist"
98 #define OPT_VDEV "vdev"
99 #define OPT_SYSLOG "syslog"
100 #define OPT_BASE_VIRTADDR "base-virtaddr"
101 #define OPT_XEN_DOM0 "xen-dom0"
102 #define OPT_CREATE_UIO_DEV "create-uio-dev"
103 #define OPT_VFIO_INTR "vfio-intr"
105 #define RTE_EAL_BLACKLIST_SIZE 0x100
107 #define MEMSIZE_IF_NO_HUGE_PAGE (64ULL * 1024ULL * 1024ULL)
109 #define SOCKET_MEM_STRLEN (RTE_MAX_NUMA_NODES * 10)
111 #define HIGHEST_RPL 3
113 #define BITS_PER_HEX 4
115 /* Allow the application to print its usage message too if set */
116 static rte_usage_hook_t rte_application_usage_hook = NULL;
118 TAILQ_HEAD(shared_driver_list, shared_driver);
120 /* Definition for shared object drivers. */
121 struct shared_driver {
122 TAILQ_ENTRY(shared_driver) next;
128 /* List of external loadable drivers */
129 static struct shared_driver_list solib_list =
130 TAILQ_HEAD_INITIALIZER(solib_list);
132 /* early configuration structure, when memory config is not mmapped */
133 static struct rte_mem_config early_mem_config;
135 /* define fd variable here, because file needs to be kept open for the
136 * duration of the program, as we hold a write lock on it in the primary proc */
137 static int mem_cfg_fd = -1;
139 static struct flock wr_lock = {
141 .l_whence = SEEK_SET,
142 .l_start = offsetof(struct rte_mem_config, memseg),
143 .l_len = sizeof(early_mem_config.memseg),
146 /* Address of global and public configuration */
147 static struct rte_config rte_config = {
148 .mem_config = &early_mem_config,
151 /* internal configuration (per-core) */
152 struct lcore_config lcore_config[RTE_MAX_LCORE];
154 /* internal configuration */
155 struct internal_config internal_config;
157 /* used by rte_rdtsc() */
158 int rte_cycles_vmware_tsc_map;
160 /* Return a pointer to the configuration structure */
162 rte_eal_get_configuration(void)
167 /* parse a sysfs (or other) file containing one integer value */
169 eal_parse_sysfs_value(const char *filename, unsigned long *val)
175 if ((f = fopen(filename, "r")) == NULL) {
176 RTE_LOG(ERR, EAL, "%s(): cannot open sysfs value %s\n",
181 if (fgets(buf, sizeof(buf), f) == NULL) {
182 RTE_LOG(ERR, EAL, "%s(): cannot read sysfs value %s\n",
187 *val = strtoul(buf, &end, 0);
188 if ((buf[0] == '\0') || (end == NULL) || (*end != '\n')) {
189 RTE_LOG(ERR, EAL, "%s(): cannot parse sysfs value %s\n",
199 /* create memory configuration in shared/mmap memory. Take out
200 * a write lock on the memsegs, so we can auto-detect primary/secondary.
201 * This means we never close the file while running (auto-close on exit).
202 * We also don't lock the whole file, so that in future we can use read-locks
203 * on other parts, e.g. memzones, to detect if there are running secondary
206 rte_eal_config_create(void)
208 void *rte_mem_cfg_addr;
211 const char *pathname = eal_runtime_config_path();
213 if (internal_config.no_shconf)
217 mem_cfg_fd = open(pathname, O_RDWR | O_CREAT, 0660);
219 rte_panic("Cannot open '%s' for rte_mem_config\n", pathname);
222 retval = ftruncate(mem_cfg_fd, sizeof(*rte_config.mem_config));
225 rte_panic("Cannot resize '%s' for rte_mem_config\n", pathname);
228 retval = fcntl(mem_cfg_fd, F_SETLK, &wr_lock);
231 rte_exit(EXIT_FAILURE, "Cannot create lock on '%s'. Is another primary "
232 "process running?\n", pathname);
235 rte_mem_cfg_addr = mmap(NULL, sizeof(*rte_config.mem_config),
236 PROT_READ | PROT_WRITE, MAP_SHARED, mem_cfg_fd, 0);
238 if (rte_mem_cfg_addr == MAP_FAILED){
239 rte_panic("Cannot mmap memory for rte_config\n");
241 memcpy(rte_mem_cfg_addr, &early_mem_config, sizeof(early_mem_config));
242 rte_config.mem_config = (struct rte_mem_config *) rte_mem_cfg_addr;
245 /* attach to an existing shared memory config */
247 rte_eal_config_attach(void)
249 void *rte_mem_cfg_addr;
250 const char *pathname = eal_runtime_config_path();
252 if (internal_config.no_shconf)
256 mem_cfg_fd = open(pathname, O_RDWR);
258 rte_panic("Cannot open '%s' for rte_mem_config\n", pathname);
261 rte_mem_cfg_addr = mmap(NULL, sizeof(*rte_config.mem_config),
262 PROT_READ | PROT_WRITE, MAP_SHARED, mem_cfg_fd, 0);
264 if (rte_mem_cfg_addr == MAP_FAILED)
265 rte_panic("Cannot mmap memory for rte_config\n");
267 rte_config.mem_config = (struct rte_mem_config *) rte_mem_cfg_addr;
270 /* Detect if we are a primary or a secondary process */
271 static enum rte_proc_type_t
272 eal_proc_type_detect(void)
274 enum rte_proc_type_t ptype = RTE_PROC_PRIMARY;
275 const char *pathname = eal_runtime_config_path();
277 /* if we can open the file but not get a write-lock we are a secondary
278 * process. NOTE: if we get a file handle back, we keep that open
279 * and don't close it to prevent a race condition between multiple opens */
280 if (((mem_cfg_fd = open(pathname, O_RDWR)) >= 0) &&
281 (fcntl(mem_cfg_fd, F_SETLK, &wr_lock) < 0))
282 ptype = RTE_PROC_SECONDARY;
284 RTE_LOG(INFO, EAL, "Auto-detected process type: %s\n",
285 ptype == RTE_PROC_PRIMARY ? "PRIMARY" : "SECONDARY");
290 /* Sets up rte_config structure with the pointer to shared memory config.*/
292 rte_config_init(void)
294 rte_config.process_type = (internal_config.process_type == RTE_PROC_AUTO) ?
295 eal_proc_type_detect() : /* for auto, detect the type */
296 internal_config.process_type; /* otherwise use what's already set */
298 switch (rte_config.process_type){
299 case RTE_PROC_PRIMARY:
300 rte_eal_config_create();
302 case RTE_PROC_SECONDARY:
303 rte_eal_config_attach();
304 rte_eal_mcfg_wait_complete(rte_config.mem_config);
307 case RTE_PROC_INVALID:
308 rte_panic("Invalid process type\n");
312 /* Unlocks hugepage directories that were locked by eal_hugepage_info_init */
314 eal_hugedirs_unlock(void)
318 for (i = 0; i < MAX_HUGEPAGE_SIZES; i++)
320 /* skip uninitialized */
321 if (internal_config.hugepage_info[i].lock_descriptor < 0)
323 /* unlock hugepage file */
324 flock(internal_config.hugepage_info[i].lock_descriptor, LOCK_UN);
325 close(internal_config.hugepage_info[i].lock_descriptor);
326 /* reset the field */
327 internal_config.hugepage_info[i].lock_descriptor = -1;
333 eal_usage(const char *prgname)
335 printf("\nUsage: %s -c COREMASK -n NUM [-m NB] [-r NUM] [-b <domain:bus:devid.func>]"
336 "[--proc-type primary|secondary|auto] \n\n"
338 " -c COREMASK : A hexadecimal bitmask of cores to run on\n"
339 " -n NUM : Number of memory channels\n"
340 " -v : Display version information on startup\n"
341 " -d LIB.so : add driver (can be used multiple times)\n"
342 " -m MB : memory to allocate (see also --"OPT_SOCKET_MEM")\n"
343 " -r NUM : force number of memory ranks (don't detect)\n"
344 " --"OPT_XEN_DOM0" : support application running on Xen Domain0 "
345 "without hugetlbfs\n"
346 " --"OPT_SYSLOG" : set syslog facility\n"
347 " --"OPT_SOCKET_MEM" : memory to allocate on specific \n"
348 " sockets (use comma separated values)\n"
349 " --"OPT_HUGE_DIR" : directory where hugetlbfs is mounted\n"
350 " --"OPT_PROC_TYPE" : type of this process\n"
351 " --"OPT_FILE_PREFIX": prefix for hugepage filenames\n"
352 " --"OPT_PCI_BLACKLIST", -b: add a PCI device in black list.\n"
353 " Prevent EAL from using this PCI device. The argument\n"
354 " format is <domain:bus:devid.func>.\n"
355 " --"OPT_PCI_WHITELIST", -w: add a PCI device in white list.\n"
356 " Only use the specified PCI devices. The argument format\n"
357 " is <[domain:]bus:devid.func>. This option can be present\n"
358 " several times (once per device).\n"
359 " [NOTE: PCI whitelist cannot be used with -b option]\n"
360 " --"OPT_VDEV": add a virtual device.\n"
361 " The argument format is <driver><id>[,key=val,...]\n"
362 " (ex: --vdev=eth_pcap0,iface=eth2).\n"
363 " --"OPT_VMWARE_TSC_MAP": use VMware TSC map instead of native RDTSC\n"
364 " --"OPT_BASE_VIRTADDR": specify base virtual address\n"
365 " --"OPT_VFIO_INTR": specify desired interrupt mode for VFIO "
366 "(legacy|msi|msix)\n"
367 " --"OPT_CREATE_UIO_DEV": create /dev/uioX (usually done by hotplug)\n"
368 "\nEAL options for DEBUG use only:\n"
369 " --"OPT_NO_HUGE" : use malloc instead of hugetlbfs\n"
370 " --"OPT_NO_PCI" : disable pci\n"
371 " --"OPT_NO_HPET" : disable hpet\n"
372 " --"OPT_NO_SHCONF": no shared config (mmap'd files)\n"
375 /* Allow the application to print its usage message too if hook is set */
376 if ( rte_application_usage_hook ) {
377 printf("===== Application Usage =====\n\n");
378 rte_application_usage_hook(prgname);
382 /* Set a per-application usage message */
384 rte_set_application_usage_hook( rte_usage_hook_t usage_func )
386 rte_usage_hook_t old_func;
388 /* Will be NULL on the first call to denote the last usage routine. */
389 old_func = rte_application_usage_hook;
390 rte_application_usage_hook = usage_func;
396 * Parse the coremask given as argument (hexadecimal string) and fill
397 * the global configuration (core role and core count) with the parsed
400 static int xdigit2val(unsigned char c)
412 eal_parse_coremask(const char *coremask)
414 struct rte_config *cfg = rte_eal_get_configuration();
420 if (coremask == NULL)
422 /* Remove all blank characters ahead and after .
423 * Remove 0x/0X if exists.
425 while (isblank(*coremask))
427 if (coremask[0] == '0' && ((coremask[1] == 'x')
428 || (coremask[1] == 'X')) )
430 i = strnlen(coremask, PATH_MAX);
431 while ((i > 0) && isblank(coremask[i - 1]))
436 for (i = i - 1; i >= 0 && idx < RTE_MAX_LCORE; i--) {
438 if (isxdigit(c) == 0) {
439 /* invalid characters */
443 for(j = 0; j < BITS_PER_HEX && idx < RTE_MAX_LCORE; j++, idx++) {
445 if (!lcore_config[idx].detected) {
446 RTE_LOG(ERR, EAL, "lcore %u "
447 "unavailable\n", idx);
450 cfg->lcore_role[idx] = ROLE_RTE;
452 cfg->master_lcore = idx;
455 cfg->lcore_role[idx] = ROLE_OFF;
460 if(coremask[i] != '0')
462 for(; idx < RTE_MAX_LCORE; idx++)
463 cfg->lcore_role[idx] = ROLE_OFF;
466 /* Update the count of enabled logical cores of the EAL configuration */
467 cfg->lcore_count = count;
472 eal_parse_syslog(const char *facility)
479 { "auth", LOG_AUTH },
480 { "cron", LOG_CRON },
481 { "daemon", LOG_DAEMON },
483 { "kern", LOG_KERN },
485 { "mail", LOG_MAIL },
486 { "news", LOG_NEWS },
487 { "syslog", LOG_SYSLOG },
488 { "user", LOG_USER },
489 { "uucp", LOG_UUCP },
490 { "local0", LOG_LOCAL0 },
491 { "local1", LOG_LOCAL1 },
492 { "local2", LOG_LOCAL2 },
493 { "local3", LOG_LOCAL3 },
494 { "local4", LOG_LOCAL4 },
495 { "local5", LOG_LOCAL5 },
496 { "local6", LOG_LOCAL6 },
497 { "local7", LOG_LOCAL7 },
501 for (i = 0; map[i].name; i++) {
502 if (!strcmp(facility, map[i].name)) {
503 internal_config.syslog_facility = map[i].value;
511 eal_parse_socket_mem(char *socket_mem)
513 char * arg[RTE_MAX_NUMA_NODES];
516 uint64_t total_mem = 0;
518 len = strnlen(socket_mem, SOCKET_MEM_STRLEN);
519 if (len == SOCKET_MEM_STRLEN) {
520 RTE_LOG(ERR, EAL, "--socket-mem is too long\n");
524 /* all other error cases will be caught later */
525 if (!isdigit(socket_mem[len-1]))
528 /* split the optarg into separate socket values */
529 arg_num = rte_strsplit(socket_mem, len,
530 arg, RTE_MAX_NUMA_NODES, ',');
532 /* if split failed, or 0 arguments */
536 internal_config.force_sockets = 1;
538 /* parse each defined socket option */
540 for (i = 0; i < arg_num; i++) {
542 internal_config.socket_mem[i] = strtoull(arg[i], &end, 10);
544 /* check for invalid input */
546 (arg[i][0] == '\0') || (end == NULL) || (*end != '\0'))
548 internal_config.socket_mem[i] *= 1024ULL;
549 internal_config.socket_mem[i] *= 1024ULL;
550 total_mem += internal_config.socket_mem[i];
553 /* check if we have a positive amount of total memory */
561 eal_parse_base_virtaddr(const char *arg)
567 addr = strtoull(arg, &end, 16);
569 /* check for errors */
570 if ((errno != 0) || (arg[0] == '\0') || end == NULL || (*end != '\0'))
573 /* make sure we don't exceed 32-bit boundary on 32-bit target */
574 #ifndef RTE_ARCH_X86_64
575 if (addr >= UINTPTR_MAX)
579 /* align the addr on 2M boundary */
580 internal_config.base_virtaddr = RTE_PTR_ALIGN_CEIL((uintptr_t)addr,
587 eal_parse_vfio_intr(const char *mode)
592 enum rte_intr_mode value;
594 { "legacy", RTE_INTR_MODE_LEGACY },
595 { "msi", RTE_INTR_MODE_MSI },
596 { "msix", RTE_INTR_MODE_MSIX },
599 for (i = 0; i < RTE_DIM(map); i++) {
600 if (!strcmp(mode, map[i].name)) {
601 internal_config.vfio_intr_mode = map[i].value;
609 eal_get_hugepage_mem_size(void)
614 for (i = 0; i < internal_config.num_hugepage_sizes; i++) {
615 struct hugepage_info *hpi = &internal_config.hugepage_info[i];
616 if (hpi->hugedir != NULL) {
617 for (j = 0; j < RTE_MAX_NUMA_NODES; j++) {
618 size += hpi->hugepage_sz * hpi->num_pages[j];
623 return (size < SIZE_MAX) ? (size_t)(size) : SIZE_MAX;
626 static enum rte_proc_type_t
627 eal_parse_proc_type(const char *arg)
629 if (strncasecmp(arg, "primary", sizeof("primary")) == 0)
630 return RTE_PROC_PRIMARY;
631 if (strncasecmp(arg, "secondary", sizeof("secondary")) == 0)
632 return RTE_PROC_SECONDARY;
633 if (strncasecmp(arg, "auto", sizeof("auto")) == 0)
634 return RTE_PROC_AUTO;
636 return RTE_PROC_INVALID;
639 /* Parse the argument given in the command line of the application */
641 eal_parse_args(int argc, char **argv)
647 char *prgname = argv[0];
648 static struct option lgopts[] = {
649 {OPT_NO_HUGE, 0, 0, 0},
650 {OPT_NO_PCI, 0, 0, 0},
651 {OPT_NO_HPET, 0, 0, 0},
652 {OPT_VMWARE_TSC_MAP, 0, 0, 0},
653 {OPT_HUGE_DIR, 1, 0, 0},
654 {OPT_NO_SHCONF, 0, 0, 0},
655 {OPT_PROC_TYPE, 1, 0, 0},
656 {OPT_FILE_PREFIX, 1, 0, 0},
657 {OPT_SOCKET_MEM, 1, 0, 0},
658 {OPT_PCI_WHITELIST, 1, 0, 0},
659 {OPT_PCI_BLACKLIST, 1, 0, 0},
661 {OPT_SYSLOG, 1, NULL, 0},
662 {OPT_VFIO_INTR, 1, NULL, 0},
663 {OPT_BASE_VIRTADDR, 1, 0, 0},
664 {OPT_XEN_DOM0, 0, 0, 0},
665 {OPT_CREATE_UIO_DEV, 1, NULL, 0},
668 struct shared_driver *solib;
672 internal_config.memory = 0;
673 internal_config.force_nrank = 0;
674 internal_config.force_nchannel = 0;
675 internal_config.hugefile_prefix = HUGEFILE_PREFIX_DEFAULT;
676 internal_config.hugepage_dir = NULL;
677 internal_config.force_sockets = 0;
678 internal_config.syslog_facility = LOG_DAEMON;
679 internal_config.xen_dom0_support = 0;
680 /* if set to NONE, interrupt mode is determined automatically */
681 internal_config.vfio_intr_mode = RTE_INTR_MODE_NONE;
682 #ifdef RTE_LIBEAL_USE_HPET
683 internal_config.no_hpet = 0;
685 internal_config.no_hpet = 1;
687 /* zero out the NUMA config */
688 for (i = 0; i < RTE_MAX_NUMA_NODES; i++)
689 internal_config.socket_mem[i] = 0;
691 /* zero out hugedir descriptors */
692 for (i = 0; i < MAX_HUGEPAGE_SIZES; i++)
693 internal_config.hugepage_info[i].lock_descriptor = -1;
695 internal_config.vmware_tsc_map = 0;
696 internal_config.base_virtaddr = 0;
698 while ((opt = getopt_long(argc, argvopt, "b:w:c:d:m:n:r:v",
699 lgopts, &option_index)) != EOF) {
704 if (rte_eal_devargs_add(RTE_DEVTYPE_BLACKLISTED_PCI,
712 if (rte_eal_devargs_add(RTE_DEVTYPE_WHITELISTED_PCI,
720 if (eal_parse_coremask(optarg) < 0) {
721 RTE_LOG(ERR, EAL, "invalid coremask\n");
727 /* force loading of external driver */
729 solib = malloc(sizeof(*solib));
731 RTE_LOG(ERR, EAL, "malloc(solib) failed\n");
734 memset(solib, 0, sizeof(*solib));
735 strncpy(solib->name, optarg, PATH_MAX-1);
736 solib->name[PATH_MAX-1] = 0;
737 TAILQ_INSERT_TAIL(&solib_list, solib, next);
741 internal_config.memory = atoi(optarg);
742 internal_config.memory *= 1024ULL;
743 internal_config.memory *= 1024ULL;
745 /* force number of channels */
747 internal_config.force_nchannel = atoi(optarg);
748 if (internal_config.force_nchannel == 0 ||
749 internal_config.force_nchannel > 4) {
750 RTE_LOG(ERR, EAL, "invalid channel number\n");
755 /* force number of ranks */
757 internal_config.force_nrank = atoi(optarg);
758 if (internal_config.force_nrank == 0 ||
759 internal_config.force_nrank > 16) {
760 RTE_LOG(ERR, EAL, "invalid rank number\n");
766 /* since message is explicitly requested by user, we
767 * write message at highest log level so it can always be seen
768 * even if info or warning messages are disabled */
769 RTE_LOG(CRIT, EAL, "RTE Version: '%s'\n", rte_version());
774 if (!strcmp(lgopts[option_index].name, OPT_NO_HUGE)) {
775 internal_config.no_hugetlbfs = 1;
777 if (!strcmp(lgopts[option_index].name, OPT_XEN_DOM0)) {
778 #ifdef RTE_LIBRTE_XEN_DOM0
779 internal_config.xen_dom0_support = 1;
781 RTE_LOG(ERR, EAL, "Can't support DPDK app "
782 "running on Dom0, please configure"
783 " RTE_LIBRTE_XEN_DOM0=y\n");
787 else if (!strcmp(lgopts[option_index].name, OPT_NO_PCI)) {
788 internal_config.no_pci = 1;
790 else if (!strcmp(lgopts[option_index].name, OPT_NO_HPET)) {
791 internal_config.no_hpet = 1;
793 else if (!strcmp(lgopts[option_index].name, OPT_VMWARE_TSC_MAP)) {
794 internal_config.vmware_tsc_map = 1;
796 else if (!strcmp(lgopts[option_index].name, OPT_NO_SHCONF)) {
797 internal_config.no_shconf = 1;
799 else if (!strcmp(lgopts[option_index].name, OPT_HUGE_DIR)) {
800 internal_config.hugepage_dir = optarg;
802 else if (!strcmp(lgopts[option_index].name, OPT_PROC_TYPE)) {
803 internal_config.process_type = eal_parse_proc_type(optarg);
805 else if (!strcmp(lgopts[option_index].name, OPT_FILE_PREFIX)) {
806 internal_config.hugefile_prefix = optarg;
808 else if (!strcmp(lgopts[option_index].name, OPT_SOCKET_MEM)) {
809 if (eal_parse_socket_mem(optarg) < 0) {
810 RTE_LOG(ERR, EAL, "invalid parameters for --"
811 OPT_SOCKET_MEM "\n");
816 else if (!strcmp(lgopts[option_index].name, OPT_USE_DEVICE)) {
817 printf("The --use-device option is deprecated, please use\n"
818 "--whitelist or --vdev instead.\n");
822 else if (!strcmp(lgopts[option_index].name, OPT_PCI_BLACKLIST)) {
823 if (rte_eal_devargs_add(RTE_DEVTYPE_BLACKLISTED_PCI,
829 else if (!strcmp(lgopts[option_index].name, OPT_PCI_WHITELIST)) {
830 if (rte_eal_devargs_add(RTE_DEVTYPE_WHITELISTED_PCI,
836 else if (!strcmp(lgopts[option_index].name, OPT_VDEV)) {
837 if (rte_eal_devargs_add(RTE_DEVTYPE_VIRTUAL,
843 else if (!strcmp(lgopts[option_index].name, OPT_SYSLOG)) {
844 if (eal_parse_syslog(optarg) < 0) {
845 RTE_LOG(ERR, EAL, "invalid parameters for --"
851 else if (!strcmp(lgopts[option_index].name, OPT_BASE_VIRTADDR)) {
852 if (eal_parse_base_virtaddr(optarg) < 0) {
853 RTE_LOG(ERR, EAL, "invalid parameter for --"
854 OPT_BASE_VIRTADDR "\n");
859 else if (!strcmp(lgopts[option_index].name, OPT_VFIO_INTR)) {
860 if (eal_parse_vfio_intr(optarg) < 0) {
861 RTE_LOG(ERR, EAL, "invalid parameters for --"
867 else if (!strcmp(lgopts[option_index].name, OPT_CREATE_UIO_DEV)) {
868 internal_config.create_uio_dev = 1;
880 RTE_LOG(ERR, EAL, "coremask not specified\n");
884 if (internal_config.process_type == RTE_PROC_AUTO){
885 internal_config.process_type = eal_proc_type_detect();
887 if (internal_config.process_type == RTE_PROC_INVALID){
888 RTE_LOG(ERR, EAL, "Invalid process type specified\n");
892 if (internal_config.process_type == RTE_PROC_PRIMARY &&
893 internal_config.force_nchannel == 0) {
894 RTE_LOG(ERR, EAL, "Number of memory channels (-n) not specified\n");
898 if (index(internal_config.hugefile_prefix,'%') != NULL){
899 RTE_LOG(ERR, EAL, "Invalid char, '%%', in '"OPT_FILE_PREFIX"' option\n");
903 if (internal_config.memory > 0 && internal_config.force_sockets == 1) {
904 RTE_LOG(ERR, EAL, "Options -m and --socket-mem cannot be specified "
905 "at the same time\n");
909 /* --no-huge doesn't make sense with either -m or --socket-mem */
910 if (internal_config.no_hugetlbfs &&
911 (internal_config.memory > 0 ||
912 internal_config.force_sockets == 1)) {
913 RTE_LOG(ERR, EAL, "Options -m or --socket-mem cannot be specified "
914 "together with --no-huge!\n");
918 /* --xen-dom0 doesn't make sense with --socket-mem */
919 if (internal_config.xen_dom0_support && internal_config.force_sockets == 1) {
920 RTE_LOG(ERR, EAL, "Options --socket-mem cannot be specified "
921 "together with --xen_dom0!\n");
926 if (rte_eal_devargs_type_count(RTE_DEVTYPE_WHITELISTED_PCI) != 0 &&
927 rte_eal_devargs_type_count(RTE_DEVTYPE_BLACKLISTED_PCI) != 0) {
928 RTE_LOG(ERR, EAL, "Error: blacklist [-b] and whitelist "
929 "[-w] options cannot be used at the same time\n");
935 argv[optind-1] = prgname;
937 /* if no memory amounts were requested, this will result in 0 and
938 * will be overriden later, right after eal_hugepage_info_init() */
939 for (i = 0; i < RTE_MAX_NUMA_NODES; i++)
940 internal_config.memory += internal_config.socket_mem[i];
943 optind = 0; /* reset getopt lib */
948 eal_check_mem_on_local_socket(void)
950 const struct rte_memseg *ms;
953 socket_id = rte_lcore_to_socket_id(rte_config.master_lcore);
955 ms = rte_eal_get_physmem_layout();
957 for (i = 0; i < RTE_MAX_MEMSEG; i++)
958 if (ms[i].socket_id == socket_id &&
962 RTE_LOG(WARNING, EAL, "WARNING: Master core has no "
963 "memory on local socket!\n");
967 sync_func(__attribute__((unused)) void *arg)
973 rte_eal_mcfg_complete(void)
975 /* ALL shared mem_config related INIT DONE */
976 if (rte_config.process_type == RTE_PROC_PRIMARY)
977 rte_config.mem_config->magic = RTE_MAGIC;
981 * Request iopl privilege for all RPL, returns 0 on success
984 rte_eal_iopl_init(void)
986 return iopl(HIGHEST_RPL);
989 /* Launch threads, called at application init(). */
991 rte_eal_init(int argc, char **argv)
995 static rte_atomic32_t run_once = RTE_ATOMIC32_INIT(0);
996 struct shared_driver *solib = NULL;
999 if (!rte_atomic32_test_and_set(&run_once))
1002 logid = strrchr(argv[0], '/');
1003 logid = strdup(logid ? logid + 1: argv[0]);
1005 thread_id = pthread_self();
1007 if (rte_eal_log_early_init() < 0)
1008 rte_panic("Cannot init early logs\n");
1010 if (rte_eal_cpu_init() < 0)
1011 rte_panic("Cannot detect lcores\n");
1013 fctret = eal_parse_args(argc, argv);
1017 if (internal_config.no_hugetlbfs == 0 &&
1018 internal_config.process_type != RTE_PROC_SECONDARY &&
1019 internal_config.xen_dom0_support == 0 &&
1020 eal_hugepage_info_init() < 0)
1021 rte_panic("Cannot get hugepage information\n");
1023 if (internal_config.memory == 0 && internal_config.force_sockets == 0) {
1024 if (internal_config.no_hugetlbfs)
1025 internal_config.memory = MEMSIZE_IF_NO_HUGE_PAGE;
1027 internal_config.memory = eal_get_hugepage_mem_size();
1030 if (internal_config.vmware_tsc_map == 1) {
1031 #ifdef RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT
1032 rte_cycles_vmware_tsc_map = 1;
1033 RTE_LOG (DEBUG, EAL, "Using VMWARE TSC MAP, "
1034 "you must have monitor_control.pseudo_perfctr = TRUE\n");
1036 RTE_LOG (WARNING, EAL, "Ignoring --vmware-tsc-map because "
1037 "RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT is not set\n");
1041 rte_srand(rte_rdtsc());
1045 if (rte_eal_iopl_init() == 0)
1046 rte_config.flags |= EAL_FLG_HIGH_IOPL;
1048 if (rte_eal_pci_init() < 0)
1049 rte_panic("Cannot init PCI\n");
1051 #ifdef RTE_LIBRTE_IVSHMEM
1052 if (rte_eal_ivshmem_init() < 0)
1053 rte_panic("Cannot init IVSHMEM\n");
1056 if (rte_eal_memory_init() < 0)
1057 rte_panic("Cannot init memory\n");
1059 /* the directories are locked during eal_hugepage_info_init */
1060 eal_hugedirs_unlock();
1062 if (rte_eal_memzone_init() < 0)
1063 rte_panic("Cannot init memzone\n");
1065 if (rte_eal_tailqs_init() < 0)
1066 rte_panic("Cannot init tail queues for objects\n");
1068 #ifdef RTE_LIBRTE_IVSHMEM
1069 if (rte_eal_ivshmem_obj_init() < 0)
1070 rte_panic("Cannot init IVSHMEM objects\n");
1073 if (rte_eal_log_init(logid, internal_config.syslog_facility) < 0)
1074 rte_panic("Cannot init logs\n");
1076 if (rte_eal_alarm_init() < 0)
1077 rte_panic("Cannot init interrupt-handling thread\n");
1079 if (rte_eal_intr_init() < 0)
1080 rte_panic("Cannot init interrupt-handling thread\n");
1082 if (rte_eal_timer_init() < 0)
1083 rte_panic("Cannot init HPET or TSC timers\n");
1085 eal_check_mem_on_local_socket();
1087 rte_eal_mcfg_complete();
1089 TAILQ_FOREACH(solib, &solib_list, next) {
1090 RTE_LOG(INFO, EAL, "open shared lib %s\n", solib->name);
1091 solib->lib_handle = dlopen(solib->name, RTLD_NOW);
1092 if (solib->lib_handle == NULL)
1093 RTE_LOG(WARNING, EAL, "%s\n", dlerror());
1096 eal_thread_init_master(rte_config.master_lcore);
1098 RTE_LOG(DEBUG, EAL, "Master core %u is ready (tid=%x)\n",
1099 rte_config.master_lcore, (int)thread_id);
1101 if (rte_eal_dev_init(PMD_INIT_PRE_PCI_PROBE) < 0)
1102 rte_panic("Cannot init pmd devices\n");
1104 RTE_LCORE_FOREACH_SLAVE(i) {
1107 * create communication pipes between master thread
1110 if (pipe(lcore_config[i].pipe_master2slave) < 0)
1111 rte_panic("Cannot create pipe\n");
1112 if (pipe(lcore_config[i].pipe_slave2master) < 0)
1113 rte_panic("Cannot create pipe\n");
1115 lcore_config[i].state = WAIT;
1117 /* create a thread for each lcore */
1118 ret = pthread_create(&lcore_config[i].thread_id, NULL,
1119 eal_thread_loop, NULL);
1121 rte_panic("Cannot create thread\n");
1125 * Launch a dummy function on all slave lcores, so that master lcore
1126 * knows they are all ready when this function returns.
1128 rte_eal_mp_remote_launch(sync_func, NULL, SKIP_MASTER);
1129 rte_eal_mp_wait_lcore();
1131 /* Probe & Initialize PCI devices */
1132 if (rte_eal_pci_probe())
1133 rte_panic("Cannot probe PCI\n");
1135 /* Initialize any outstanding devices */
1136 if (rte_eal_dev_init(PMD_INIT_POST_PCI_PROBE) < 0)
1137 rte_panic("Cannot init pmd devices\n");
1143 enum rte_lcore_role_t
1144 rte_eal_lcore_role(unsigned lcore_id)
1146 return (rte_config.lcore_role[lcore_id]);
1149 enum rte_proc_type_t
1150 rte_eal_process_type(void)
1152 return (rte_config.process_type);
1155 int rte_eal_has_hugepages(void)
1157 return ! internal_config.no_hugetlbfs;