4 * Copyright 2016 Cavium, Inc.
5 * Copyright 2016 Intel Corporation.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
12 * * Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * * Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in
16 * the documentation and/or other materials provided with the
18 * * Neither the name of Cavium, Inc nor the names of its
19 * contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
24 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
25 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
26 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
27 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
28 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
29 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
30 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
32 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 #ifndef _RTE_EVENTDEV_H_
36 #define _RTE_EVENTDEV_H_
41 * RTE Event Device API
43 * In a polling model, lcores poll ethdev ports and associated rx queues
44 * directly to look for packet. In an event driven model, by contrast, lcores
45 * call the scheduler that selects packets for them based on programmer
46 * specified criteria. Eventdev library adds support for event driven
47 * programming model, which offer applications automatic multicore scaling,
48 * dynamic load balancing, pipelining, packet ingress order maintenance and
49 * synchronization services to simplify application packet processing.
51 * The Event Device API is composed of two parts:
53 * - The application-oriented Event API that includes functions to setup
54 * an event device (configure it, setup its queues, ports and start it), to
55 * establish the link between queues to port and to receive events, and so on.
57 * - The driver-oriented Event API that exports a function allowing
58 * an event poll Mode Driver (PMD) to simultaneously register itself as
59 * an event device driver.
61 * Event device components:
65 * +-------+ | | flow 0 | |
66 * |Packet | | +-------------+ |
67 * |event | | +-------------+ |
68 * | | | | flow 1 | |port_link(port0, queue0)
69 * +-------+ | +-------------+ | | +--------+
70 * +-------+ | +-------------+ o-----v-----o |dequeue +------+
71 * |Crypto | | | flow n | | | event +------->|Core 0|
72 * |work | | +-------------+ o----+ | port 0 | | |
73 * |done ev| | event queue 0 | | +--------+ +------+
74 * +-------+ +-----------------+ |
76 * |Timer | +-----------------+ | +--------+
77 * |expiry | | +-------------+ | +------o |dequeue +------+
78 * |event | | | flow 0 | o-----------o event +------->|Core 1|
79 * +-------+ | +-------------+ | +----o port 1 | | |
80 * Event enqueue | +-------------+ | | +--------+ +------+
81 * o-------------> | | flow 1 | | |
82 * enqueue( | +-------------+ | |
83 * queue_id, | | | +--------+ +------+
84 * flow_id, | +-------------+ | | | |dequeue |Core 2|
85 * sched_type, | | flow n | o-----------o event +------->| |
86 * event_type, | +-------------+ | | | port 2 | +------+
87 * subev_type, | event queue 1 | | +--------+
88 * event) +-----------------+ | +--------+
89 * | | |dequeue +------+
90 * +-------+ +-----------------+ | | event +------->|Core n|
91 * |Core | | +-------------+ o-----------o port n | | |
92 * |(SW) | | | flow 0 | | | +--------+ +--+---+
93 * |event | | +-------------+ | | |
94 * +-------+ | +-------------+ | | |
95 * ^ | | flow 1 | | | |
96 * | | +-------------+ o------+ |
97 * | | +-------------+ | |
99 * | | +-------------+ | |
100 * | | event queue n | |
101 * | +-----------------+ |
103 * +-----------------------------------------------------------+
105 * Event device: A hardware or software-based event scheduler.
107 * Event: A unit of scheduling that encapsulates a packet or other datatype
108 * like SW generated event from the CPU, Crypto work completion notification,
109 * Timer expiry event notification etc as well as metadata.
110 * The metadata includes flow ID, scheduling type, event priority, event_type,
111 * sub_event_type etc.
113 * Event queue: A queue containing events that are scheduled by the event dev.
114 * An event queue contains events of different flows associated with scheduling
115 * types, such as atomic, ordered, or parallel.
117 * Event port: An application's interface into the event dev for enqueue and
118 * dequeue operations. Each event port can be linked with one or more
119 * event queues for dequeue operations.
121 * By default, all the functions of the Event Device API exported by a PMD
122 * are lock-free functions which assume to not be invoked in parallel on
123 * different logical cores to work on the same target object. For instance,
124 * the dequeue function of a PMD cannot be invoked in parallel on two logical
125 * cores to operates on same event port. Of course, this function
126 * can be invoked in parallel by different logical cores on different ports.
127 * It is the responsibility of the upper level application to enforce this rule.
129 * In all functions of the Event API, the Event device is
130 * designated by an integer >= 0 named the device identifier *dev_id*
132 * At the Event driver level, Event devices are represented by a generic
133 * data structure of type *rte_event_dev*.
135 * Event devices are dynamically registered during the PCI/SoC device probing
136 * phase performed at EAL initialization time.
137 * When an Event device is being probed, a *rte_event_dev* structure and
138 * a new device identifier are allocated for that device. Then, the
139 * event_dev_init() function supplied by the Event driver matching the probed
140 * device is invoked to properly initialize the device.
142 * The role of the device init function consists of resetting the hardware or
143 * software event driver implementations.
145 * If the device init operation is successful, the correspondence between
146 * the device identifier assigned to the new device and its associated
147 * *rte_event_dev* structure is effectively registered.
148 * Otherwise, both the *rte_event_dev* structure and the device identifier are
151 * The functions exported by the application Event API to setup a device
152 * designated by its device identifier must be invoked in the following order:
153 * - rte_event_dev_configure()
154 * - rte_event_queue_setup()
155 * - rte_event_port_setup()
156 * - rte_event_port_link()
157 * - rte_event_dev_start()
159 * Then, the application can invoke, in any order, the functions
160 * exported by the Event API to schedule events, dequeue events, enqueue events,
161 * change event queue(s) to event port [un]link establishment and so on.
163 * Application may use rte_event_[queue/port]_default_conf_get() to get the
164 * default configuration to set up an event queue or event port by
165 * overriding few default values.
167 * If the application wants to change the configuration (i.e. call
168 * rte_event_dev_configure(), rte_event_queue_setup(), or
169 * rte_event_port_setup()), it must call rte_event_dev_stop() first to stop the
170 * device and then do the reconfiguration before calling rte_event_dev_start()
171 * again. The schedule, enqueue and dequeue functions should not be invoked
172 * when the device is stopped.
174 * Finally, an application can close an Event device by invoking the
175 * rte_event_dev_close() function.
177 * Each function of the application Event API invokes a specific function
178 * of the PMD that controls the target device designated by its device
181 * For this purpose, all device-specific functions of an Event driver are
182 * supplied through a set of pointers contained in a generic structure of type
184 * The address of the *event_dev_ops* structure is stored in the *rte_event_dev*
185 * structure by the device init function of the Event driver, which is
186 * invoked during the PCI/SoC device probing phase, as explained earlier.
188 * In other words, each function of the Event API simply retrieves the
189 * *rte_event_dev* structure associated with the device identifier and
190 * performs an indirect invocation of the corresponding driver function
191 * supplied in the *event_dev_ops* structure of the *rte_event_dev* structure.
193 * For performance reasons, the address of the fast-path functions of the
194 * Event driver is not contained in the *event_dev_ops* structure.
195 * Instead, they are directly stored at the beginning of the *rte_event_dev*
196 * structure to avoid an extra indirect memory access during their invocation.
198 * RTE event device drivers do not use interrupts for enqueue or dequeue
199 * operation. Instead, Event drivers export Poll-Mode enqueue and dequeue
200 * functions to applications.
202 * The events are injected to event device through *enqueue* operation by
203 * event producers in the system. The typical event producers are ethdev
204 * subsystem for generating packet events, CPU(SW) for generating events based
205 * on different stages of application processing, cryptodev for generating
206 * crypto work completion notification etc
208 * The *dequeue* operation gets one or more events from the event ports.
209 * The application process the events and send to downstream event queue through
210 * rte_event_enqueue_burst() if it is an intermediate stage of event processing,
211 * on the final stage, the application may send to different subsystem like
212 * ethdev to send the packet/event on the wire using ethdev
213 * rte_eth_tx_burst() API.
215 * The point at which events are scheduled to ports depends on the device.
216 * For hardware devices, scheduling occurs asynchronously without any software
217 * intervention. Software schedulers can either be distributed
218 * (each worker thread schedules events to its own port) or centralized
219 * (a dedicated thread schedules to all ports). Distributed software schedulers
220 * perform the scheduling in rte_event_dequeue_burst(), whereas centralized
221 * scheduler logic is located in rte_event_schedule().
222 * The RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED capability flag is not set
223 * indicates the device is centralized and thus needs a dedicated scheduling
224 * thread that repeatedly calls rte_event_schedule().
226 * An event driven worker thread has following typical workflow on fastpath:
229 * rte_event_dequeue_burst(...);
231 * rte_event_enqueue_burst(...);
241 #include <rte_common.h>
242 #include <rte_memory.h>
243 #include <rte_errno.h>
245 struct rte_mbuf; /* we just use mbuf pointers; no need to include rte_mbuf.h */
247 /* Event device capability bitmap flags */
248 #define RTE_EVENT_DEV_CAP_QUEUE_QOS (1ULL << 0)
249 /**< Event scheduling prioritization is based on the priority associated with
252 * @see rte_event_queue_setup()
254 #define RTE_EVENT_DEV_CAP_EVENT_QOS (1ULL << 1)
255 /**< Event scheduling prioritization is based on the priority associated with
256 * each event. Priority of each event is supplied in *rte_event* structure
257 * on each enqueue operation.
259 * @see rte_event_enqueue_burst()
261 #define RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED (1ULL << 2)
262 /**< Event device operates in distributed scheduling mode.
263 * In distributed scheduling mode, event scheduling happens in HW or
264 * rte_event_dequeue_burst() or the combination of these two.
265 * If the flag is not set then eventdev is centralized and thus needs a
266 * dedicated scheduling thread that repeatedly calls rte_event_schedule().
268 * @see rte_event_schedule(), rte_event_dequeue_burst()
270 #define RTE_EVENT_DEV_CAP_QUEUE_ALL_TYPES (1ULL << 3)
271 /**< Event device is capable of enqueuing events of any type to any queue.
272 * If this capability is not set, the queue only supports events of the
273 * *RTE_EVENT_QUEUE_CFG_* type that it was created with.
275 * @see RTE_EVENT_QUEUE_CFG_* values
277 #define RTE_EVENT_DEV_CAP_BURST_MODE (1ULL << 4)
278 /**< Event device is capable of operating in burst mode for enqueue(forward,
279 * release) and dequeue operation. If this capability is not set, application
280 * still uses the rte_event_dequeue_burst() and rte_event_enqueue_burst() but
281 * PMD accepts only one event at a time.
283 * @see rte_event_dequeue_burst() rte_event_enqueue_burst()
286 /* Event device priority levels */
287 #define RTE_EVENT_DEV_PRIORITY_HIGHEST 0
288 /**< Highest priority expressed across eventdev subsystem
289 * @see rte_event_queue_setup(), rte_event_enqueue_burst()
290 * @see rte_event_port_link()
292 #define RTE_EVENT_DEV_PRIORITY_NORMAL 128
293 /**< Normal priority expressed across eventdev subsystem
294 * @see rte_event_queue_setup(), rte_event_enqueue_burst()
295 * @see rte_event_port_link()
297 #define RTE_EVENT_DEV_PRIORITY_LOWEST 255
298 /**< Lowest priority expressed across eventdev subsystem
299 * @see rte_event_queue_setup(), rte_event_enqueue_burst()
300 * @see rte_event_port_link()
304 * Get the total number of event devices that have been successfully
308 * The total number of usable event devices.
311 rte_event_dev_count(void);
314 * Get the device identifier for the named event device.
317 * Event device name to select the event device identifier.
320 * Returns event device identifier on success.
321 * - <0: Failure to find named event device.
324 rte_event_dev_get_dev_id(const char *name);
327 * Return the NUMA socket to which a device is connected.
330 * The identifier of the device.
332 * The NUMA socket id to which the device is connected or
333 * a default of zero if the socket could not be determined.
334 * -(-EINVAL) dev_id value is out of range.
337 rte_event_dev_socket_id(uint8_t dev_id);
340 * Event device information
342 struct rte_event_dev_info {
343 const char *driver_name; /**< Event driver name */
344 struct rte_device *dev; /**< Device information */
345 uint32_t min_dequeue_timeout_ns;
346 /**< Minimum supported global dequeue timeout(ns) by this device */
347 uint32_t max_dequeue_timeout_ns;
348 /**< Maximum supported global dequeue timeout(ns) by this device */
349 uint32_t dequeue_timeout_ns;
350 /**< Configured global dequeue timeout(ns) for this device */
351 uint8_t max_event_queues;
352 /**< Maximum event_queues supported by this device */
353 uint32_t max_event_queue_flows;
354 /**< Maximum supported flows in an event queue by this device*/
355 uint8_t max_event_queue_priority_levels;
356 /**< Maximum number of event queue priority levels by this device.
357 * Valid when the device has RTE_EVENT_DEV_CAP_QUEUE_QOS capability
359 uint8_t max_event_priority_levels;
360 /**< Maximum number of event priority levels by this device.
361 * Valid when the device has RTE_EVENT_DEV_CAP_EVENT_QOS capability
363 uint8_t max_event_ports;
364 /**< Maximum number of event ports supported by this device */
365 uint8_t max_event_port_dequeue_depth;
366 /**< Maximum number of events can be dequeued at a time from an
367 * event port by this device.
368 * A device that does not support bulk dequeue will set this as 1.
370 uint32_t max_event_port_enqueue_depth;
371 /**< Maximum number of events can be enqueued at a time from an
372 * event port by this device.
373 * A device that does not support bulk enqueue will set this as 1.
375 int32_t max_num_events;
376 /**< A *closed system* event dev has a limit on the number of events it
377 * can manage at a time. An *open system* event dev does not have a
378 * limit and will specify this as -1.
380 uint32_t event_dev_cap;
381 /**< Event device capabilities(RTE_EVENT_DEV_CAP_)*/
385 * Retrieve the contextual information of an event device.
388 * The identifier of the device.
390 * @param[out] dev_info
391 * A pointer to a structure of type *rte_event_dev_info* to be filled with the
392 * contextual information of the device.
395 * - 0: Success, driver updates the contextual information of the event device
396 * - <0: Error code returned by the driver info get function.
400 rte_event_dev_info_get(uint8_t dev_id, struct rte_event_dev_info *dev_info);
403 * The count of ports.
405 #define RTE_EVENT_DEV_ATTR_PORT_COUNT 0
407 * The count of queues.
409 #define RTE_EVENT_DEV_ATTR_QUEUE_COUNT 1
411 * The status of the device, zero for stopped, non-zero for started.
413 #define RTE_EVENT_DEV_ATTR_STARTED 2
416 * Get an attribute from a device.
418 * @param dev_id Eventdev id
419 * @param attr_id The attribute ID to retrieve
420 * @param[out] attr_value A pointer that will be filled in with the attribute
421 * value if successful.
423 * @retval 0 Successfully retrieved attribute value
424 * -EINVAL Invalid device or *attr_id* provided, or *attr_value*
428 rte_event_dev_attr_get(uint8_t dev_id, uint32_t attr_id,
429 uint32_t *attr_value);
432 /* Event device configuration bitmap flags */
433 #define RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT (1ULL << 0)
434 /**< Override the global *dequeue_timeout_ns* and use per dequeue timeout in ns.
435 * @see rte_event_dequeue_timeout_ticks(), rte_event_dequeue_burst()
438 /** Event device configuration structure */
439 struct rte_event_dev_config {
440 uint32_t dequeue_timeout_ns;
441 /**< rte_event_dequeue_burst() timeout on this device.
442 * This value should be in the range of *min_dequeue_timeout_ns* and
443 * *max_dequeue_timeout_ns* which previously provided in
444 * rte_event_dev_info_get()
445 * The value 0 is allowed, in which case, default dequeue timeout used.
446 * @see RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT
448 int32_t nb_events_limit;
449 /**< In a *closed system* this field is the limit on maximum number of
450 * events that can be inflight in the eventdev at a given time. The
451 * limit is required to ensure that the finite space in a closed system
452 * is not overwhelmed. The value cannot exceed the *max_num_events*
453 * as provided by rte_event_dev_info_get().
454 * This value should be set to -1 for *open system*.
456 uint8_t nb_event_queues;
457 /**< Number of event queues to configure on this device.
458 * This value cannot exceed the *max_event_queues* which previously
459 * provided in rte_event_dev_info_get()
461 uint8_t nb_event_ports;
462 /**< Number of event ports to configure on this device.
463 * This value cannot exceed the *max_event_ports* which previously
464 * provided in rte_event_dev_info_get()
466 uint32_t nb_event_queue_flows;
467 /**< Number of flows for any event queue on this device.
468 * This value cannot exceed the *max_event_queue_flows* which previously
469 * provided in rte_event_dev_info_get()
471 uint32_t nb_event_port_dequeue_depth;
472 /**< Maximum number of events can be dequeued at a time from an
473 * event port by this device.
474 * This value cannot exceed the *max_event_port_dequeue_depth*
475 * which previously provided in rte_event_dev_info_get().
476 * Ignored when device is not RTE_EVENT_DEV_CAP_BURST_MODE capable.
477 * @see rte_event_port_setup()
479 uint32_t nb_event_port_enqueue_depth;
480 /**< Maximum number of events can be enqueued at a time from an
481 * event port by this device.
482 * This value cannot exceed the *max_event_port_enqueue_depth*
483 * which previously provided in rte_event_dev_info_get().
484 * Ignored when device is not RTE_EVENT_DEV_CAP_BURST_MODE capable.
485 * @see rte_event_port_setup()
487 uint32_t event_dev_cfg;
488 /**< Event device config flags(RTE_EVENT_DEV_CFG_)*/
492 * Configure an event device.
494 * This function must be invoked first before any other function in the
495 * API. This function can also be re-invoked when a device is in the
498 * The caller may use rte_event_dev_info_get() to get the capability of each
499 * resources available for this event device.
502 * The identifier of the device to configure.
504 * The event device configuration structure.
507 * - 0: Success, device configured.
508 * - <0: Error code returned by the driver configuration function.
511 rte_event_dev_configure(uint8_t dev_id,
512 const struct rte_event_dev_config *dev_conf);
515 /* Event queue specific APIs */
517 /* Event queue configuration bitmap flags */
518 #define RTE_EVENT_QUEUE_CFG_TYPE_MASK (3ULL << 0)
519 /**< Mask for event queue schedule type configuration request */
520 #define RTE_EVENT_QUEUE_CFG_ALL_TYPES (0ULL << 0)
521 /**< Allow ATOMIC,ORDERED,PARALLEL schedule type enqueue
523 * @see RTE_SCHED_TYPE_ORDERED, RTE_SCHED_TYPE_ATOMIC, RTE_SCHED_TYPE_PARALLEL
524 * @see rte_event_enqueue_burst()
526 #define RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY (1ULL << 0)
527 /**< Allow only ATOMIC schedule type enqueue
529 * The rte_event_enqueue_burst() result is undefined if the queue configured
530 * with ATOMIC only and sched_type != RTE_SCHED_TYPE_ATOMIC
532 * @see RTE_SCHED_TYPE_ATOMIC, rte_event_enqueue_burst()
534 #define RTE_EVENT_QUEUE_CFG_ORDERED_ONLY (2ULL << 0)
535 /**< Allow only ORDERED schedule type enqueue
537 * The rte_event_enqueue_burst() result is undefined if the queue configured
538 * with ORDERED only and sched_type != RTE_SCHED_TYPE_ORDERED
540 * @see RTE_SCHED_TYPE_ORDERED, rte_event_enqueue_burst()
542 #define RTE_EVENT_QUEUE_CFG_PARALLEL_ONLY (3ULL << 0)
543 /**< Allow only PARALLEL schedule type enqueue
545 * The rte_event_enqueue_burst() result is undefined if the queue configured
546 * with PARALLEL only and sched_type != RTE_SCHED_TYPE_PARALLEL
548 * @see RTE_SCHED_TYPE_PARALLEL, rte_event_enqueue_burst()
550 #define RTE_EVENT_QUEUE_CFG_SINGLE_LINK (1ULL << 2)
551 /**< This event queue links only to a single event port.
553 * @see rte_event_port_setup(), rte_event_port_link()
556 /** Event queue configuration structure */
557 struct rte_event_queue_conf {
558 uint32_t nb_atomic_flows;
559 /**< The maximum number of active flows this queue can track at any
560 * given time. If the queue is configured for atomic scheduling (by
561 * applying the RTE_EVENT_QUEUE_CFG_ALL_TYPES or
562 * RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY flags to event_queue_cfg), then the
563 * value must be in the range of [1, nb_event_queue_flows], which was
564 * previously provided in rte_event_dev_configure().
566 uint32_t nb_atomic_order_sequences;
567 /**< The maximum number of outstanding events waiting to be
568 * reordered by this queue. In other words, the number of entries in
569 * this queue’s reorder buffer.When the number of events in the
570 * reorder buffer reaches to *nb_atomic_order_sequences* then the
571 * scheduler cannot schedule the events from this queue and invalid
572 * event will be returned from dequeue until one or more entries are
574 * If the queue is configured for ordered scheduling (by applying the
575 * RTE_EVENT_QUEUE_CFG_ALL_TYPES or RTE_EVENT_QUEUE_CFG_ORDERED_ONLY
576 * flags to event_queue_cfg), then the value must be in the range of
577 * [1, nb_event_queue_flows], which was previously supplied to
578 * rte_event_dev_configure().
580 uint32_t event_queue_cfg; /**< Queue cfg flags(EVENT_QUEUE_CFG_) */
582 /**< Priority for this event queue relative to other event queues.
583 * The requested priority should in the range of
584 * [RTE_EVENT_DEV_PRIORITY_HIGHEST, RTE_EVENT_DEV_PRIORITY_LOWEST].
585 * The implementation shall normalize the requested priority to
586 * event device supported priority value.
587 * Valid when the device has RTE_EVENT_DEV_CAP_QUEUE_QOS capability
592 * Retrieve the default configuration information of an event queue designated
593 * by its *queue_id* from the event driver for an event device.
595 * This function intended to be used in conjunction with rte_event_queue_setup()
596 * where caller needs to set up the queue by overriding few default values.
599 * The identifier of the device.
601 * The index of the event queue to get the configuration information.
602 * The value must be in the range [0, nb_event_queues - 1]
603 * previously supplied to rte_event_dev_configure().
604 * @param[out] queue_conf
605 * The pointer to the default event queue configuration data.
607 * - 0: Success, driver updates the default event queue configuration data.
608 * - <0: Error code returned by the driver info get function.
610 * @see rte_event_queue_setup()
614 rte_event_queue_default_conf_get(uint8_t dev_id, uint8_t queue_id,
615 struct rte_event_queue_conf *queue_conf);
618 * Allocate and set up an event queue for an event device.
621 * The identifier of the device.
623 * The index of the event queue to setup. The value must be in the range
624 * [0, nb_event_queues - 1] previously supplied to rte_event_dev_configure().
626 * The pointer to the configuration data to be used for the event queue.
627 * NULL value is allowed, in which case default configuration used.
629 * @see rte_event_queue_default_conf_get()
632 * - 0: Success, event queue correctly set up.
633 * - <0: event queue configuration failed
636 rte_event_queue_setup(uint8_t dev_id, uint8_t queue_id,
637 const struct rte_event_queue_conf *queue_conf);
640 * The priority of the queue.
642 #define RTE_EVENT_QUEUE_ATTR_PRIORITY 0
644 * The number of atomic flows configured for the queue.
646 #define RTE_EVENT_QUEUE_ATTR_NB_ATOMIC_FLOWS 1
648 * The number of atomic order sequences configured for the queue.
650 #define RTE_EVENT_QUEUE_ATTR_NB_ATOMIC_ORDER_SEQUENCES 2
652 * The cfg flags for the queue.
654 #define RTE_EVENT_QUEUE_ATTR_EVENT_QUEUE_CFG 3
657 * Get an attribute from a queue.
659 * @param dev_id Eventdev id
660 * @param queue_id Eventdev queue id
661 * @param attr_id The attribute ID to retrieve
662 * @param[out] attr_value A pointer that will be filled in with the attribute
663 * value if successful
665 * @retval 0 Successfully returned value
666 * -EINVAL invalid device, queue or attr_id provided, or attr_value
670 rte_event_queue_attr_get(uint8_t dev_id, uint8_t queue_id, uint32_t attr_id,
671 uint32_t *attr_value);
673 /* Event port specific APIs */
675 /** Event port configuration structure */
676 struct rte_event_port_conf {
677 int32_t new_event_threshold;
678 /**< A backpressure threshold for new event enqueues on this port.
679 * Use for *closed system* event dev where event capacity is limited,
680 * and cannot exceed the capacity of the event dev.
681 * Configuring ports with different thresholds can make higher priority
682 * traffic less likely to be backpressured.
683 * For example, a port used to inject NIC Rx packets into the event dev
684 * can have a lower threshold so as not to overwhelm the device,
685 * while ports used for worker pools can have a higher threshold.
686 * This value cannot exceed the *nb_events_limit*
687 * which was previously supplied to rte_event_dev_configure().
688 * This should be set to '-1' for *open system*.
690 uint16_t dequeue_depth;
691 /**< Configure number of bulk dequeues for this event port.
692 * This value cannot exceed the *nb_event_port_dequeue_depth*
693 * which previously supplied to rte_event_dev_configure().
694 * Ignored when device is not RTE_EVENT_DEV_CAP_BURST_MODE capable.
696 uint16_t enqueue_depth;
697 /**< Configure number of bulk enqueues for this event port.
698 * This value cannot exceed the *nb_event_port_enqueue_depth*
699 * which previously supplied to rte_event_dev_configure().
700 * Ignored when device is not RTE_EVENT_DEV_CAP_BURST_MODE capable.
705 * Retrieve the default configuration information of an event port designated
706 * by its *port_id* from the event driver for an event device.
708 * This function intended to be used in conjunction with rte_event_port_setup()
709 * where caller needs to set up the port by overriding few default values.
712 * The identifier of the device.
714 * The index of the event port to get the configuration information.
715 * The value must be in the range [0, nb_event_ports - 1]
716 * previously supplied to rte_event_dev_configure().
717 * @param[out] port_conf
718 * The pointer to the default event port configuration data
720 * - 0: Success, driver updates the default event port configuration data.
721 * - <0: Error code returned by the driver info get function.
723 * @see rte_event_port_setup()
727 rte_event_port_default_conf_get(uint8_t dev_id, uint8_t port_id,
728 struct rte_event_port_conf *port_conf);
731 * Allocate and set up an event port for an event device.
734 * The identifier of the device.
736 * The index of the event port to setup. The value must be in the range
737 * [0, nb_event_ports - 1] previously supplied to rte_event_dev_configure().
739 * The pointer to the configuration data to be used for the queue.
740 * NULL value is allowed, in which case default configuration used.
742 * @see rte_event_port_default_conf_get()
745 * - 0: Success, event port correctly set up.
746 * - <0: Port configuration failed
747 * - (-EDQUOT) Quota exceeded(Application tried to link the queue configured
748 * with RTE_EVENT_QUEUE_CFG_SINGLE_LINK to more than one event ports)
751 rte_event_port_setup(uint8_t dev_id, uint8_t port_id,
752 const struct rte_event_port_conf *port_conf);
755 * The queue depth of the port on the enqueue side
757 #define RTE_EVENT_PORT_ATTR_ENQ_DEPTH 0
759 * The queue depth of the port on the dequeue side
761 #define RTE_EVENT_PORT_ATTR_DEQ_DEPTH 1
763 * The new event threshold of the port
765 #define RTE_EVENT_PORT_ATTR_NEW_EVENT_THRESHOLD 2
768 * Get an attribute from a port.
770 * @param dev_id Eventdev id
771 * @param port_id Eventdev port id
772 * @param attr_id The attribute ID to retrieve
773 * @param[out] attr_value A pointer that will be filled in with the attribute
774 * value if successful
776 * @retval 0 Successfully returned value
777 * -EINVAL Invalid device, port or attr_id, or attr_value was NULL
780 rte_event_port_attr_get(uint8_t dev_id, uint8_t port_id, uint32_t attr_id,
781 uint32_t *attr_value);
784 * Start an event device.
786 * The device start step is the last one and consists of setting the event
787 * queues to start accepting the events and schedules to event ports.
789 * On success, all basic functions exported by the API (event enqueue,
790 * event dequeue and so on) can be invoked.
793 * Event device identifier
795 * - 0: Success, device started.
796 * - -ESTALE : Not all ports of the device are configured
797 * - -ENOLINK: Not all queues are linked, which could lead to deadlock.
800 rte_event_dev_start(uint8_t dev_id);
803 * Stop an event device. The device can be restarted with a call to
804 * rte_event_dev_start()
807 * Event device identifier.
810 rte_event_dev_stop(uint8_t dev_id);
813 * Close an event device. The device cannot be restarted!
816 * Event device identifier
819 * - 0 on successfully closing device
820 * - <0 on failure to close device
821 * - (-EAGAIN) if device is busy
824 rte_event_dev_close(uint8_t dev_id);
826 /* Scheduler type definitions */
827 #define RTE_SCHED_TYPE_ORDERED 0
828 /**< Ordered scheduling
830 * Events from an ordered flow of an event queue can be scheduled to multiple
831 * ports for concurrent processing while maintaining the original event order.
832 * This scheme enables the user to achieve high single flow throughput by
833 * avoiding SW synchronization for ordering between ports which bound to cores.
835 * The source flow ordering from an event queue is maintained when events are
836 * enqueued to their destination queue within the same ordered flow context.
837 * An event port holds the context until application call
838 * rte_event_dequeue_burst() from the same port, which implicitly releases
840 * User may allow the scheduler to release the context earlier than that
841 * by invoking rte_event_enqueue_burst() with RTE_EVENT_OP_RELEASE operation.
843 * Events from the source queue appear in their original order when dequeued
844 * from a destination queue.
845 * Event ordering is based on the received event(s), but also other
846 * (newly allocated or stored) events are ordered when enqueued within the same
847 * ordered context. Events not enqueued (e.g. released or stored) within the
848 * context are considered missing from reordering and are skipped at this time
849 * (but can be ordered again within another context).
851 * @see rte_event_queue_setup(), rte_event_dequeue_burst(), RTE_EVENT_OP_RELEASE
854 #define RTE_SCHED_TYPE_ATOMIC 1
855 /**< Atomic scheduling
857 * Events from an atomic flow of an event queue can be scheduled only to a
858 * single port at a time. The port is guaranteed to have exclusive (atomic)
859 * access to the associated flow context, which enables the user to avoid SW
860 * synchronization. Atomic flows also help to maintain event ordering
861 * since only one port at a time can process events from a flow of an
864 * The atomic queue synchronization context is dedicated to the port until
865 * application call rte_event_dequeue_burst() from the same port,
866 * which implicitly releases the context. User may allow the scheduler to
867 * release the context earlier than that by invoking rte_event_enqueue_burst()
868 * with RTE_EVENT_OP_RELEASE operation.
870 * @see rte_event_queue_setup(), rte_event_dequeue_burst(), RTE_EVENT_OP_RELEASE
873 #define RTE_SCHED_TYPE_PARALLEL 2
874 /**< Parallel scheduling
876 * The scheduler performs priority scheduling, load balancing, etc. functions
877 * but does not provide additional event synchronization or ordering.
878 * It is free to schedule events from a single parallel flow of an event queue
879 * to multiple events ports for concurrent processing.
880 * The application is responsible for flow context synchronization and
881 * event ordering (SW synchronization).
883 * @see rte_event_queue_setup(), rte_event_dequeue_burst()
886 /* Event types to classify the event source */
887 #define RTE_EVENT_TYPE_ETHDEV 0x0
888 /**< The event generated from ethdev subsystem */
889 #define RTE_EVENT_TYPE_CRYPTODEV 0x1
890 /**< The event generated from crypodev subsystem */
891 #define RTE_EVENT_TYPE_TIMERDEV 0x2
892 /**< The event generated from timerdev subsystem */
893 #define RTE_EVENT_TYPE_CPU 0x3
894 /**< The event generated from cpu for pipelining.
895 * Application may use *sub_event_type* to further classify the event
897 #define RTE_EVENT_TYPE_ETH_RX_ADAPTER 0x4
898 /**< The event generated from event eth Rx adapter */
899 #define RTE_EVENT_TYPE_MAX 0x10
900 /**< Maximum number of event types */
902 /* Event enqueue operations */
903 #define RTE_EVENT_OP_NEW 0
904 /**< The event producers use this operation to inject a new event to the
907 #define RTE_EVENT_OP_FORWARD 1
908 /**< The CPU use this operation to forward the event to different event queue or
909 * change to new application specific flow or schedule type to enable
912 * This operation must only be enqueued to the same port that the
913 * event to be forwarded was dequeued from.
915 #define RTE_EVENT_OP_RELEASE 2
916 /**< Release the flow context associated with the schedule type.
918 * If current flow's scheduler type method is *RTE_SCHED_TYPE_ATOMIC*
919 * then this function hints the scheduler that the user has completed critical
920 * section processing in the current atomic context.
921 * The scheduler is now allowed to schedule events from the same flow from
922 * an event queue to another port. However, the context may be still held
923 * until the next rte_event_dequeue_burst() call, this call allows but does not
924 * force the scheduler to release the context early.
926 * Early atomic context release may increase parallelism and thus system
927 * performance, but the user needs to design carefully the split into critical
928 * vs non-critical sections.
930 * If current flow's scheduler type method is *RTE_SCHED_TYPE_ORDERED*
931 * then this function hints the scheduler that the user has done all that need
932 * to maintain event order in the current ordered context.
933 * The scheduler is allowed to release the ordered context of this port and
934 * avoid reordering any following enqueues.
936 * Early ordered context release may increase parallelism and thus system
939 * If current flow's scheduler type method is *RTE_SCHED_TYPE_PARALLEL*
940 * or no scheduling context is held then this function may be an NOOP,
941 * depending on the implementation.
943 * This operation must only be enqueued to the same port that the
944 * event to be released was dequeued from.
949 * The generic *rte_event* structure to hold the event attributes
950 * for dequeue and enqueue operation
957 /** Event attributes for dequeue or enqueue operation */
960 /**< Targeted flow identifier for the enqueue and
962 * The value must be in the range of
963 * [0, nb_event_queue_flows - 1] which
964 * previously supplied to rte_event_dev_configure().
966 uint32_t sub_event_type:8;
967 /**< Sub-event types based on the event source.
968 * @see RTE_EVENT_TYPE_CPU
970 uint32_t event_type:4;
971 /**< Event type to classify the event source.
972 * @see RTE_EVENT_TYPE_ETHDEV, (RTE_EVENT_TYPE_*)
975 /**< The type of event enqueue operation - new/forward/
976 * etc.This field is not preserved across an instance
977 * and is undefined on dequeue.
978 * @see RTE_EVENT_OP_NEW, (RTE_EVENT_OP_*)
981 /**< Reserved for future use */
982 uint8_t sched_type:2;
983 /**< Scheduler synchronization type (RTE_SCHED_TYPE_*)
984 * associated with flow id on a given event queue
985 * for the enqueue and dequeue operation.
988 /**< Targeted event queue identifier for the enqueue or
990 * The value must be in the range of
991 * [0, nb_event_queues - 1] which previously supplied to
992 * rte_event_dev_configure().
995 /**< Event priority relative to other events in the
996 * event queue. The requested priority should in the
997 * range of [RTE_EVENT_DEV_PRIORITY_HIGHEST,
998 * RTE_EVENT_DEV_PRIORITY_LOWEST].
999 * The implementation shall normalize the requested
1000 * priority to supported priority value.
1001 * Valid when the device has
1002 * RTE_EVENT_DEV_CAP_EVENT_QOS capability.
1004 uint8_t impl_opaque;
1005 /**< Implementation specific opaque value.
1006 * An implementation may use this field to hold
1007 * implementation specific value to share between
1008 * dequeue and enqueue operation.
1009 * The application should not modify this field.
1016 /**< Opaque 64-bit value */
1018 /**< Opaque event pointer */
1019 struct rte_mbuf *mbuf;
1020 /**< mbuf pointer if dequeued event is associated with mbuf */
1024 /* Ethdev Rx adapter capability bitmap flags */
1025 #define RTE_EVENT_ETH_RX_ADAPTER_CAP_INTERNAL_PORT 0x1
1026 /**< This flag is sent when the packet transfer mechanism is in HW.
1027 * Ethdev can send packets to the event device using internal event port.
1029 #define RTE_EVENT_ETH_RX_ADAPTER_CAP_MULTI_EVENTQ 0x2
1030 /**< Adapter supports multiple event queues per ethdev. Every ethdev
1031 * Rx queue can be connected to a unique event queue.
1033 #define RTE_EVENT_ETH_RX_ADAPTER_CAP_OVERRIDE_FLOW_ID 0x4
1034 /**< The application can override the adapter generated flow ID in the
1035 * event. This flow ID can be specified when adding an ethdev Rx queue
1036 * to the adapter using the ev member of struct rte_event_eth_rx_adapter
1037 * @see struct rte_event_eth_rx_adapter_queue_conf::ev
1038 * @see struct rte_event_eth_rx_adapter_queue_conf::rx_queue_flags
1042 * Retrieve the event device's ethdev Rx adapter capabilities for the
1043 * specified ethernet port
1046 * The identifier of the device.
1048 * @param eth_port_id
1049 * The identifier of the ethernet device.
1052 * A pointer to memory filled with Rx event adapter capabilities.
1055 * - 0: Success, driver provides Rx event adapter capabilities for the
1057 * - <0: Error code returned by the driver function.
1061 rte_event_eth_rx_adapter_caps_get(uint8_t dev_id, uint8_t eth_port_id,
1064 struct rte_eventdev_driver;
1065 struct rte_eventdev_ops;
1066 struct rte_eventdev;
1068 typedef void (*event_schedule_t)(struct rte_eventdev *dev);
1069 /**< @internal Schedule one or more events in the event dev. */
1071 typedef uint16_t (*event_enqueue_t)(void *port, const struct rte_event *ev);
1072 /**< @internal Enqueue event on port of a device */
1074 typedef uint16_t (*event_enqueue_burst_t)(void *port,
1075 const struct rte_event ev[], uint16_t nb_events);
1076 /**< @internal Enqueue burst of events on port of a device */
1078 typedef uint16_t (*event_dequeue_t)(void *port, struct rte_event *ev,
1079 uint64_t timeout_ticks);
1080 /**< @internal Dequeue event from port of a device */
1082 typedef uint16_t (*event_dequeue_burst_t)(void *port, struct rte_event ev[],
1083 uint16_t nb_events, uint64_t timeout_ticks);
1084 /**< @internal Dequeue burst of events from port of a device */
1086 #define RTE_EVENTDEV_NAME_MAX_LEN (64)
1087 /**< @internal Max length of name of event PMD */
1091 * The data part, with no function pointers, associated with each device.
1093 * This structure is safe to place in shared memory to be common among
1094 * different processes in a multi-process configuration.
1096 struct rte_eventdev_data {
1098 /**< Socket ID where memory is allocated */
1100 /**< Device ID for this instance */
1102 /**< Number of event queues. */
1104 /**< Number of event ports. */
1106 /**< Array of pointers to ports. */
1107 struct rte_event_port_conf *ports_cfg;
1108 /**< Array of port configuration structures. */
1109 struct rte_event_queue_conf *queues_cfg;
1110 /**< Array of queue configuration structures. */
1111 uint16_t *links_map;
1112 /**< Memory to store queues to port connections. */
1114 /**< PMD-specific private data */
1115 uint32_t event_dev_cap;
1116 /**< Event device capabilities(RTE_EVENT_DEV_CAP_)*/
1117 struct rte_event_dev_config dev_conf;
1118 /**< Configuration applied to device. */
1121 uint8_t dev_started : 1;
1122 /**< Device state: STARTED(1)/STOPPED(0) */
1124 char name[RTE_EVENTDEV_NAME_MAX_LEN];
1125 /**< Unique identifier name */
1126 } __rte_cache_aligned;
1128 /** @internal The data structure associated with each event device. */
1129 struct rte_eventdev {
1130 event_schedule_t schedule;
1131 /**< Pointer to PMD schedule function. */
1132 event_enqueue_t enqueue;
1133 /**< Pointer to PMD enqueue function. */
1134 event_enqueue_burst_t enqueue_burst;
1135 /**< Pointer to PMD enqueue burst function. */
1136 event_enqueue_burst_t enqueue_new_burst;
1137 /**< Pointer to PMD enqueue burst function(op new variant) */
1138 event_enqueue_burst_t enqueue_forward_burst;
1139 /**< Pointer to PMD enqueue burst function(op forward variant) */
1140 event_dequeue_t dequeue;
1141 /**< Pointer to PMD dequeue function. */
1142 event_dequeue_burst_t dequeue_burst;
1143 /**< Pointer to PMD dequeue burst function. */
1145 struct rte_eventdev_data *data;
1146 /**< Pointer to device data */
1147 const struct rte_eventdev_ops *dev_ops;
1148 /**< Functions exported by PMD */
1149 struct rte_device *dev;
1150 /**< Device info. supplied by probing */
1153 uint8_t attached : 1;
1154 /**< Flag indicating the device is attached */
1155 } __rte_cache_aligned;
1157 extern struct rte_eventdev *rte_eventdevs;
1158 /** @internal The pool of rte_eventdev structures. */
1162 * Schedule one or more events in the event dev.
1164 * An event dev implementation may define this is a NOOP, for instance if
1165 * the event dev performs its scheduling in hardware.
1168 * The identifier of the device.
1171 rte_event_schedule(uint8_t dev_id)
1173 struct rte_eventdev *dev = &rte_eventdevs[dev_id];
1175 (*dev->schedule)(dev);
1178 static __rte_always_inline uint16_t
1179 __rte_event_enqueue_burst(uint8_t dev_id, uint8_t port_id,
1180 const struct rte_event ev[], uint16_t nb_events,
1181 const event_enqueue_burst_t fn)
1183 const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
1185 #ifdef RTE_LIBRTE_EVENTDEV_DEBUG
1186 if (dev_id >= RTE_EVENT_MAX_DEVS || !rte_eventdevs[dev_id].attached) {
1187 rte_errno = -EINVAL;
1191 if (port_id >= dev->data->nb_ports) {
1192 rte_errno = -EINVAL;
1197 * Allow zero cost non burst mode routine invocation if application
1198 * requests nb_events as const one
1201 return (*dev->enqueue)(dev->data->ports[port_id], ev);
1203 return fn(dev->data->ports[port_id], ev, nb_events);
1207 * Enqueue a burst of events objects or an event object supplied in *rte_event*
1208 * structure on an event device designated by its *dev_id* through the event
1209 * port specified by *port_id*. Each event object specifies the event queue on
1210 * which it will be enqueued.
1212 * The *nb_events* parameter is the number of event objects to enqueue which are
1213 * supplied in the *ev* array of *rte_event* structure.
1215 * Event operations RTE_EVENT_OP_FORWARD and RTE_EVENT_OP_RELEASE must only be
1216 * enqueued to the same port that their associated events were dequeued from.
1218 * The rte_event_enqueue_burst() function returns the number of
1219 * events objects it actually enqueued. A return value equal to *nb_events*
1220 * means that all event objects have been enqueued.
1223 * The identifier of the device.
1225 * The identifier of the event port.
1227 * Points to an array of *nb_events* objects of type *rte_event* structure
1228 * which contain the event object enqueue operations to be processed.
1230 * The number of event objects to enqueue, typically number of
1231 * rte_event_port_enqueue_depth() available for this port.
1234 * The number of event objects actually enqueued on the event device. The
1235 * return value can be less than the value of the *nb_events* parameter when
1236 * the event devices queue is full or if invalid parameters are specified in a
1237 * *rte_event*. If the return value is less than *nb_events*, the remaining
1238 * events at the end of ev[] are not consumed and the caller has to take care
1239 * of them, and rte_errno is set accordingly. Possible errno values include:
1240 * - -EINVAL The port ID is invalid, device ID is invalid, an event's queue
1241 * ID is invalid, or an event's sched type doesn't match the
1242 * capabilities of the destination queue.
1243 * - -ENOSPC The event port was backpressured and unable to enqueue
1244 * one or more events. This error code is only applicable to
1246 * @see rte_event_port_enqueue_depth()
1248 static inline uint16_t
1249 rte_event_enqueue_burst(uint8_t dev_id, uint8_t port_id,
1250 const struct rte_event ev[], uint16_t nb_events)
1252 const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
1254 return __rte_event_enqueue_burst(dev_id, port_id, ev, nb_events,
1255 dev->enqueue_burst);
1259 * Enqueue a burst of events objects of operation type *RTE_EVENT_OP_NEW* on
1260 * an event device designated by its *dev_id* through the event port specified
1263 * Provides the same functionality as rte_event_enqueue_burst(), expect that
1264 * application can use this API when the all objects in the burst contains
1265 * the enqueue operation of the type *RTE_EVENT_OP_NEW*. This specialized
1266 * function can provide the additional hint to the PMD and optimize if possible.
1268 * The rte_event_enqueue_new_burst() result is undefined if the enqueue burst
1269 * has event object of operation type != RTE_EVENT_OP_NEW.
1272 * The identifier of the device.
1274 * The identifier of the event port.
1276 * Points to an array of *nb_events* objects of type *rte_event* structure
1277 * which contain the event object enqueue operations to be processed.
1279 * The number of event objects to enqueue, typically number of
1280 * rte_event_port_enqueue_depth() available for this port.
1283 * The number of event objects actually enqueued on the event device. The
1284 * return value can be less than the value of the *nb_events* parameter when
1285 * the event devices queue is full or if invalid parameters are specified in a
1286 * *rte_event*. If the return value is less than *nb_events*, the remaining
1287 * events at the end of ev[] are not consumed and the caller has to take care
1288 * of them, and rte_errno is set accordingly. Possible errno values include:
1289 * - -EINVAL The port ID is invalid, device ID is invalid, an event's queue
1290 * ID is invalid, or an event's sched type doesn't match the
1291 * capabilities of the destination queue.
1292 * - -ENOSPC The event port was backpressured and unable to enqueue
1293 * one or more events. This error code is only applicable to
1295 * @see rte_event_port_enqueue_depth() rte_event_enqueue_burst()
1297 static inline uint16_t
1298 rte_event_enqueue_new_burst(uint8_t dev_id, uint8_t port_id,
1299 const struct rte_event ev[], uint16_t nb_events)
1301 const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
1303 return __rte_event_enqueue_burst(dev_id, port_id, ev, nb_events,
1304 dev->enqueue_new_burst);
1308 * Enqueue a burst of events objects of operation type *RTE_EVENT_OP_FORWARD*
1309 * on an event device designated by its *dev_id* through the event port
1310 * specified by *port_id*.
1312 * Provides the same functionality as rte_event_enqueue_burst(), expect that
1313 * application can use this API when the all objects in the burst contains
1314 * the enqueue operation of the type *RTE_EVENT_OP_FORWARD*. This specialized
1315 * function can provide the additional hint to the PMD and optimize if possible.
1317 * The rte_event_enqueue_new_burst() result is undefined if the enqueue burst
1318 * has event object of operation type != RTE_EVENT_OP_FORWARD.
1321 * The identifier of the device.
1323 * The identifier of the event port.
1325 * Points to an array of *nb_events* objects of type *rte_event* structure
1326 * which contain the event object enqueue operations to be processed.
1328 * The number of event objects to enqueue, typically number of
1329 * rte_event_port_enqueue_depth() available for this port.
1332 * The number of event objects actually enqueued on the event device. The
1333 * return value can be less than the value of the *nb_events* parameter when
1334 * the event devices queue is full or if invalid parameters are specified in a
1335 * *rte_event*. If the return value is less than *nb_events*, the remaining
1336 * events at the end of ev[] are not consumed and the caller has to take care
1337 * of them, and rte_errno is set accordingly. Possible errno values include:
1338 * - -EINVAL The port ID is invalid, device ID is invalid, an event's queue
1339 * ID is invalid, or an event's sched type doesn't match the
1340 * capabilities of the destination queue.
1341 * - -ENOSPC The event port was backpressured and unable to enqueue
1342 * one or more events. This error code is only applicable to
1344 * @see rte_event_port_enqueue_depth() rte_event_enqueue_burst()
1346 static inline uint16_t
1347 rte_event_enqueue_forward_burst(uint8_t dev_id, uint8_t port_id,
1348 const struct rte_event ev[], uint16_t nb_events)
1350 const struct rte_eventdev *dev = &rte_eventdevs[dev_id];
1352 return __rte_event_enqueue_burst(dev_id, port_id, ev, nb_events,
1353 dev->enqueue_forward_burst);
1357 * Converts nanoseconds to *timeout_ticks* value for rte_event_dequeue_burst()
1359 * If the device is configured with RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT flag
1360 * then application can use this function to convert timeout value in
1361 * nanoseconds to implementations specific timeout value supplied in
1362 * rte_event_dequeue_burst()
1365 * The identifier of the device.
1367 * Wait time in nanosecond
1368 * @param[out] timeout_ticks
1369 * Value for the *timeout_ticks* parameter in rte_event_dequeue_burst()
1373 * - -ENOTSUP if the device doesn't support timeouts
1374 * - -EINVAL if *dev_id* is invalid or *timeout_ticks* is NULL
1375 * - other values < 0 on failure.
1377 * @see rte_event_dequeue_burst(), RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT
1378 * @see rte_event_dev_configure()
1382 rte_event_dequeue_timeout_ticks(uint8_t dev_id, uint64_t ns,
1383 uint64_t *timeout_ticks);
1386 * Dequeue a burst of events objects or an event object from the event port
1387 * designated by its *event_port_id*, on an event device designated
1390 * rte_event_dequeue_burst() does not dictate the specifics of scheduling
1391 * algorithm as each eventdev driver may have different criteria to schedule
1392 * an event. However, in general, from an application perspective scheduler may
1393 * use the following scheme to dispatch an event to the port.
1395 * 1) Selection of event queue based on
1396 * a) The list of event queues are linked to the event port.
1397 * b) If the device has RTE_EVENT_DEV_CAP_QUEUE_QOS capability then event
1398 * queue selection from list is based on event queue priority relative to
1399 * other event queue supplied as *priority* in rte_event_queue_setup()
1400 * c) If the device has RTE_EVENT_DEV_CAP_EVENT_QOS capability then event
1401 * queue selection from the list is based on event priority supplied as
1402 * *priority* in rte_event_enqueue_burst()
1403 * 2) Selection of event
1404 * a) The number of flows available in selected event queue.
1405 * b) Schedule type method associated with the event
1407 * The *nb_events* parameter is the maximum number of event objects to dequeue
1408 * which are returned in the *ev* array of *rte_event* structure.
1410 * The rte_event_dequeue_burst() function returns the number of events objects
1411 * it actually dequeued. A return value equal to *nb_events* means that all
1412 * event objects have been dequeued.
1414 * The number of events dequeued is the number of scheduler contexts held by
1415 * this port. These contexts are automatically released in the next
1416 * rte_event_dequeue_burst() invocation, or invoking rte_event_enqueue_burst()
1417 * with RTE_EVENT_OP_RELEASE operation can be used to release the
1420 * Event operations RTE_EVENT_OP_FORWARD and RTE_EVENT_OP_RELEASE must only be
1421 * enqueued to the same port that their associated events were dequeued from.
1424 * The identifier of the device.
1426 * The identifier of the event port.
1428 * Points to an array of *nb_events* objects of type *rte_event* structure
1429 * for output to be populated with the dequeued event objects.
1431 * The maximum number of event objects to dequeue, typically number of
1432 * rte_event_port_dequeue_depth() available for this port.
1434 * @param timeout_ticks
1435 * - 0 no-wait, returns immediately if there is no event.
1436 * - >0 wait for the event, if the device is configured with
1437 * RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT then this function will wait until
1438 * at least one event is available or *timeout_ticks* time.
1439 * if the device is not configured with RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT
1440 * then this function will wait until the event available or
1441 * *dequeue_timeout_ns* ns which was previously supplied to
1442 * rte_event_dev_configure()
1445 * The number of event objects actually dequeued from the port. The return
1446 * value can be less than the value of the *nb_events* parameter when the
1447 * event port's queue is not full.
1449 * @see rte_event_port_dequeue_depth()
1451 static inline uint16_t
1452 rte_event_dequeue_burst(uint8_t dev_id, uint8_t port_id, struct rte_event ev[],
1453 uint16_t nb_events, uint64_t timeout_ticks)
1455 struct rte_eventdev *dev = &rte_eventdevs[dev_id];
1457 #ifdef RTE_LIBRTE_EVENTDEV_DEBUG
1458 if (dev_id >= RTE_EVENT_MAX_DEVS || !rte_eventdevs[dev_id].attached) {
1459 rte_errno = -EINVAL;
1463 if (port_id >= dev->data->nb_ports) {
1464 rte_errno = -EINVAL;
1470 * Allow zero cost non burst mode routine invocation if application
1471 * requests nb_events as const one
1474 return (*dev->dequeue)(
1475 dev->data->ports[port_id], ev, timeout_ticks);
1477 return (*dev->dequeue_burst)(
1478 dev->data->ports[port_id], ev, nb_events,
1483 * Link multiple source event queues supplied in *queues* to the destination
1484 * event port designated by its *port_id* with associated service priority
1485 * supplied in *priorities* on the event device designated by its *dev_id*.
1487 * The link establishment shall enable the event port *port_id* from
1488 * receiving events from the specified event queue(s) supplied in *queues*
1490 * An event queue may link to one or more event ports.
1491 * The number of links can be established from an event queue to event port is
1492 * implementation defined.
1494 * Event queue(s) to event port link establishment can be changed at runtime
1495 * without re-configuring the device to support scaling and to reduce the
1496 * latency of critical work by establishing the link with more event ports
1500 * The identifier of the device.
1503 * Event port identifier to select the destination port to link.
1506 * Points to an array of *nb_links* event queues to be linked
1507 * to the event port.
1508 * NULL value is allowed, in which case this function links all the configured
1509 * event queues *nb_event_queues* which previously supplied to
1510 * rte_event_dev_configure() to the event port *port_id*
1513 * Points to an array of *nb_links* service priorities associated with each
1514 * event queue link to event port.
1515 * The priority defines the event port's servicing priority for
1516 * event queue, which may be ignored by an implementation.
1517 * The requested priority should in the range of
1518 * [RTE_EVENT_DEV_PRIORITY_HIGHEST, RTE_EVENT_DEV_PRIORITY_LOWEST].
1519 * The implementation shall normalize the requested priority to
1520 * implementation supported priority value.
1521 * NULL value is allowed, in which case this function links the event queues
1522 * with RTE_EVENT_DEV_PRIORITY_NORMAL servicing priority
1525 * The number of links to establish. This parameter is ignored if queues is
1529 * The number of links actually established. The return value can be less than
1530 * the value of the *nb_links* parameter when the implementation has the
1531 * limitation on specific queue to port link establishment or if invalid
1532 * parameters are specified in *queues*
1533 * If the return value is less than *nb_links*, the remaining links at the end
1534 * of link[] are not established, and the caller has to take care of them.
1535 * If return value is less than *nb_links* then implementation shall update the
1536 * rte_errno accordingly, Possible rte_errno values are
1537 * (-EDQUOT) Quota exceeded(Application tried to link the queue configured with
1538 * RTE_EVENT_QUEUE_CFG_SINGLE_LINK to more than one event ports)
1539 * (-EINVAL) Invalid parameter
1543 rte_event_port_link(uint8_t dev_id, uint8_t port_id,
1544 const uint8_t queues[], const uint8_t priorities[],
1548 * Unlink multiple source event queues supplied in *queues* from the destination
1549 * event port designated by its *port_id* on the event device designated
1552 * The unlink establishment shall disable the event port *port_id* from
1553 * receiving events from the specified event queue *queue_id*
1555 * Event queue(s) to event port unlink establishment can be changed at runtime
1556 * without re-configuring the device.
1559 * The identifier of the device.
1562 * Event port identifier to select the destination port to unlink.
1565 * Points to an array of *nb_unlinks* event queues to be unlinked
1566 * from the event port.
1567 * NULL value is allowed, in which case this function unlinks all the
1568 * event queue(s) from the event port *port_id*.
1571 * The number of unlinks to establish. This parameter is ignored if queues is
1575 * The number of unlinks actually established. The return value can be less
1576 * than the value of the *nb_unlinks* parameter when the implementation has the
1577 * limitation on specific queue to port unlink establishment or
1578 * if invalid parameters are specified.
1579 * If the return value is less than *nb_unlinks*, the remaining queues at the
1580 * end of queues[] are not established, and the caller has to take care of them.
1581 * If return value is less than *nb_unlinks* then implementation shall update
1582 * the rte_errno accordingly, Possible rte_errno values are
1583 * (-EINVAL) Invalid parameter
1587 rte_event_port_unlink(uint8_t dev_id, uint8_t port_id,
1588 uint8_t queues[], uint16_t nb_unlinks);
1591 * Retrieve the list of source event queues and its associated service priority
1592 * linked to the destination event port designated by its *port_id*
1593 * on the event device designated by its *dev_id*.
1596 * The identifier of the device.
1599 * Event port identifier.
1601 * @param[out] queues
1602 * Points to an array of *queues* for output.
1603 * The caller has to allocate *RTE_EVENT_MAX_QUEUES_PER_DEV* bytes to
1604 * store the event queue(s) linked with event port *port_id*
1606 * @param[out] priorities
1607 * Points to an array of *priorities* for output.
1608 * The caller has to allocate *RTE_EVENT_MAX_QUEUES_PER_DEV* bytes to
1609 * store the service priority associated with each event queue linked
1612 * The number of links established on the event port designated by its
1618 rte_event_port_links_get(uint8_t dev_id, uint8_t port_id,
1619 uint8_t queues[], uint8_t priorities[]);
1622 * Dump internal information about *dev_id* to the FILE* provided in *f*.
1625 * The identifier of the device.
1628 * A pointer to a file for output
1635 rte_event_dev_dump(uint8_t dev_id, FILE *f);
1637 /** Maximum name length for extended statistics counters */
1638 #define RTE_EVENT_DEV_XSTATS_NAME_SIZE 64
1641 * Selects the component of the eventdev to retrieve statistics from.
1643 enum rte_event_dev_xstats_mode {
1644 RTE_EVENT_DEV_XSTATS_DEVICE,
1645 RTE_EVENT_DEV_XSTATS_PORT,
1646 RTE_EVENT_DEV_XSTATS_QUEUE,
1650 * A name-key lookup element for extended statistics.
1652 * This structure is used to map between names and ID numbers
1653 * for extended ethdev statistics.
1655 struct rte_event_dev_xstats_name {
1656 char name[RTE_EVENT_DEV_XSTATS_NAME_SIZE];
1660 * Retrieve names of extended statistics of an event device.
1663 * The identifier of the event device.
1665 * The mode of statistics to retrieve. Choices include the device statistics,
1666 * port statistics or queue statistics.
1667 * @param queue_port_id
1668 * Used to specify the port or queue number in queue or port mode, and is
1669 * ignored in device mode.
1670 * @param[out] xstats_names
1671 * Block of memory to insert names into. Must be at least size in capacity.
1672 * If set to NULL, function returns required capacity.
1674 * Block of memory to insert ids into. Must be at least size in capacity.
1675 * If set to NULL, function returns required capacity. The id values returned
1676 * can be passed to *rte_event_dev_xstats_get* to select statistics.
1678 * Capacity of xstats_names (number of names).
1680 * - positive value lower or equal to size: success. The return value
1681 * is the number of entries filled in the stats table.
1682 * - positive value higher than size: error, the given statistics table
1683 * is too small. The return value corresponds to the size that should
1684 * be given to succeed. The entries in the table are not valid and
1685 * shall not be used by the caller.
1686 * - negative value on error:
1687 * -ENODEV for invalid *dev_id*
1688 * -EINVAL for invalid mode, queue port or id parameters
1689 * -ENOTSUP if the device doesn't support this function.
1692 rte_event_dev_xstats_names_get(uint8_t dev_id,
1693 enum rte_event_dev_xstats_mode mode,
1694 uint8_t queue_port_id,
1695 struct rte_event_dev_xstats_name *xstats_names,
1700 * Retrieve extended statistics of an event device.
1703 * The identifier of the device.
1705 * The mode of statistics to retrieve. Choices include the device statistics,
1706 * port statistics or queue statistics.
1707 * @param queue_port_id
1708 * Used to specify the port or queue number in queue or port mode, and is
1709 * ignored in device mode.
1711 * The id numbers of the stats to get. The ids can be got from the stat
1712 * position in the stat list from rte_event_dev_get_xstats_names(), or
1713 * by using rte_eventdev_get_xstats_by_name()
1714 * @param[out] values
1715 * The values for each stats request by ID.
1717 * The number of stats requested
1719 * - positive value: number of stat entries filled into the values array
1720 * - negative value on error:
1721 * -ENODEV for invalid *dev_id*
1722 * -EINVAL for invalid mode, queue port or id parameters
1723 * -ENOTSUP if the device doesn't support this function.
1726 rte_event_dev_xstats_get(uint8_t dev_id,
1727 enum rte_event_dev_xstats_mode mode,
1728 uint8_t queue_port_id,
1729 const unsigned int ids[],
1730 uint64_t values[], unsigned int n);
1733 * Retrieve the value of a single stat by requesting it by name.
1736 * The identifier of the device
1738 * The stat name to retrieve
1740 * If non-NULL, the numerical id of the stat will be returned, so that further
1741 * requests for the stat can be got using rte_eventdev_xstats_get, which will
1742 * be faster as it doesn't need to scan a list of names for the stat.
1743 * If the stat cannot be found, the id returned will be (unsigned)-1.
1745 * - positive value or zero: the stat value
1746 * - negative value: -EINVAL if stat not found, -ENOTSUP if not supported.
1749 rte_event_dev_xstats_by_name_get(uint8_t dev_id, const char *name,
1753 * Reset the values of the xstats of the selected component in the device.
1756 * The identifier of the device
1758 * The mode of the statistics to reset. Choose from device, queue or port.
1759 * @param queue_port_id
1760 * The queue or port to reset. 0 and positive values select ports and queues,
1761 * while -1 indicates all ports or queues.
1763 * Selects specific statistics to be reset. When NULL, all statistics selected
1764 * by *mode* will be reset. If non-NULL, must point to array of at least
1767 * The number of ids available from the *ids* array. Ignored when ids is NULL.
1769 * - zero: successfully reset the statistics to zero
1770 * - negative value: -EINVAL invalid parameters, -ENOTSUP if not supported.
1773 rte_event_dev_xstats_reset(uint8_t dev_id,
1774 enum rte_event_dev_xstats_mode mode,
1775 int16_t queue_port_id,
1776 const uint32_t ids[],
1783 #endif /* _RTE_EVENTDEV_H_ */