.. SPDX-License-Identifier: BSD-3-Clause Copyright(C) 2021 Marvell. Marvell cnxk platform guide =========================== This document gives an overview of **Marvell OCTEON CN9K and CN10K** RVU H/W block, packet flow and procedure to build DPDK on OCTEON cnxk platform. More information about CN9K and CN10K SoC can be found at `Marvell Official Website `_. Supported OCTEON cnxk SoCs -------------------------- - CN93xx - CN96xx - CN98xx - CN106xx - CNF105xx Resource Virtualization Unit architecture ----------------------------------------- The :numref:`figure_cnxk_resource_virtualization` diagram depicts the RVU architecture and a resource provisioning example. .. _figure_cnxk_resource_virtualization: .. figure:: img/cnxk_resource_virtualization.* cnxk Resource virtualization architecture and provisioning example Resource Virtualization Unit (RVU) on Marvell's OCTEON CN9K/CN10K SoC maps HW resources belonging to the network, crypto and other functional blocks onto PCI-compatible physical and virtual functions. Each functional block has multiple local functions (LFs) for provisioning to different PCIe devices. RVU supports multiple PCIe SRIOV physical functions (PFs) and virtual functions (VFs). The :numref:`table_cnxk_rvu_dpdk_mapping` shows the various local functions (LFs) provided by the RVU and its functional mapping to DPDK subsystem. .. _table_cnxk_rvu_dpdk_mapping: .. table:: RVU managed functional blocks and its mapping to DPDK subsystem +---+-----+--------------------------------------------------------------+ | # | LF | DPDK subsystem mapping | +===+=====+==============================================================+ | 1 | NIX | rte_ethdev, rte_tm, rte_event_eth_[rt]x_adapter, rte_security| +---+-----+--------------------------------------------------------------+ | 2 | NPA | rte_mempool | +---+-----+--------------------------------------------------------------+ | 3 | NPC | rte_flow | +---+-----+--------------------------------------------------------------+ | 4 | CPT | rte_cryptodev, rte_event_crypto_adapter | +---+-----+--------------------------------------------------------------+ | 5 | SSO | rte_eventdev | +---+-----+--------------------------------------------------------------+ | 6 | TIM | rte_event_timer_adapter | +---+-----+--------------------------------------------------------------+ | 7 | LBK | rte_ethdev | +---+-----+--------------------------------------------------------------+ | 8 | DPI | rte_dmadev | +---+-----+--------------------------------------------------------------+ | 9 | SDP | rte_ethdev | +---+-----+--------------------------------------------------------------+ | 10| REE | rte_regexdev | +---+-----+--------------------------------------------------------------+ | 11| BPHY| rte_rawdev | +---+-----+--------------------------------------------------------------+ | 12| GPIO| rte_rawdev | +---+-----+--------------------------------------------------------------+ PF0 is called the administrative / admin function (AF) and has exclusive privileges to provision RVU functional block's LFs to each of the PF/VF. PF/VFs communicates with AF via a shared memory region (mailbox).Upon receiving requests from PF/VF, AF does resource provisioning and other HW configuration. AF is always attached to host, but PF/VFs may be used by host kernel itself, or attached to VMs or to userspace applications like DPDK, etc. So, AF has to handle provisioning/configuration requests sent by any device from any domain. The AF driver does not receive or process any data. It is only a configuration driver used in control path. The :numref:`figure_cnxk_resource_virtualization` diagram also shows a resource provisioning example where, 1. PFx and PFx-VF0 bound to Linux netdev driver. 2. PFx-VF1 ethdev driver bound to the first DPDK application. 3. PFy ethdev driver, PFy-VF0 ethdev driver, PFz eventdev driver, PFm-VF0 cryptodev driver bound to the second DPDK application. LBK HW Access ------------- Loopback HW Unit (LBK) receives packets from NIX-RX and sends packets back to NIX-TX. The loopback block has N channels and contains data buffering that is shared across all channels. The LBK HW Unit is abstracted using ethdev subsystem, Where PF0's VFs are exposed as ethdev device and odd-even pairs of VFs are tied together, that is, packets sent on odd VF end up received on even VF and vice versa. This would enable HW accelerated means of communication between two domains where even VF bound to the first domain and odd VF bound to the second domain. Typical application usage models are, #. Communication between the Linux kernel and DPDK application. #. Exception path to Linux kernel from DPDK application as SW ``KNI`` replacement. #. Communication between two different DPDK applications. SDP interface ------------- System DPI Packet Interface unit(SDP) provides PCIe endpoint support for remote host to DMA packets into and out of cnxk SoC. SDP interface comes in to live only when cnxk SoC is connected in PCIe endpoint mode. It can be used to send/receive packets to/from remote host machine using input/output queue pairs exposed to it. SDP interface receives input packets from remote host from NIX-RX and sends packets to remote host using NIX-TX. Remote host machine need to use corresponding driver (kernel/user mode) to communicate with SDP interface on cnxk SoC. SDP supports single PCIe SRIOV physical function(PF) and multiple virtual functions(VF's). Users can bind PF or VF to use SDP interface and it will be enumerated as ethdev ports. The primary use case for SDP is to enable the smart NIC use case. Typical usage models are, #. Communication channel between remote host and cnxk SoC over PCIe. #. Transfer packets received from network interface to remote host over PCIe and vice-versa. cnxk packet flow ---------------------- The :numref:`figure_cnxk_packet_flow_hw_accelerators` diagram depicts the packet flow on cnxk SoC in conjunction with use of various HW accelerators. .. _figure_cnxk_packet_flow_hw_accelerators: .. figure:: img/cnxk_packet_flow_hw_accelerators.* cnxk packet flow in conjunction with use of HW accelerators HW Offload Drivers ------------------ This section lists dataplane H/W block(s) available in cnxk SoC. #. **Ethdev Driver** See :doc:`../nics/cnxk` for NIX Ethdev driver information. #. **Mempool Driver** See :doc:`../mempool/cnxk` for NPA mempool driver information. #. **Baseband PHY Driver** See :doc:`../rawdevs/cnxk_bphy` for Baseband PHY driver information. #. **Dmadev Driver** See :doc:`../dmadevs/cnxk` for DPI Dmadev driver information. #. **Regex Device Driver** See :doc:`../regexdevs/cn9k` for REE Regex device driver information. Procedure to Setup Platform --------------------------- There are three main prerequisites for setting up DPDK on cnxk compatible board: 1. **RVU AF Linux kernel driver** The dependent kernel drivers can be obtained from the `kernel.org `_. Alternatively, the Marvell SDK also provides the required kernel drivers. Linux kernel should be configured with the following features enabled: .. code-block:: console # 64K pages enabled for better performance CONFIG_ARM64_64K_PAGES=y CONFIG_ARM64_VA_BITS_48=y # huge pages support enabled CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y # VFIO enabled with TYPE1 IOMMU at minimum CONFIG_VFIO_IOMMU_TYPE1=y CONFIG_VFIO_VIRQFD=y CONFIG_VFIO=y CONFIG_VFIO_NOIOMMU=y CONFIG_VFIO_PCI=y CONFIG_VFIO_PCI_MMAP=y # SMMUv3 driver CONFIG_ARM_SMMU_V3=y # ARMv8.1 LSE atomics CONFIG_ARM64_LSE_ATOMICS=y # OCTEONTX2 drivers CONFIG_OCTEONTX2_MBOX=y CONFIG_OCTEONTX2_AF=y # Enable if netdev PF driver required CONFIG_OCTEONTX2_PF=y # Enable if netdev VF driver required CONFIG_OCTEONTX2_VF=y CONFIG_CRYPTO_DEV_OCTEONTX2_CPT=y # Enable if OCTEONTX2 DMA PF driver required CONFIG_OCTEONTX2_DPI_PF=n 2. **ARM64 Linux Tool Chain** For example, the *aarch64* Linaro Toolchain, which can be obtained from `here `_. Alternatively, the Marvell SDK also provides GNU GCC toolchain, which is optimized for cnxk CPU. 3. **Rootfile system** Any *aarch64* supporting filesystem may be used. For example, Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained from ``_. Alternatively, the Marvell SDK provides the buildroot based root filesystem. The SDK includes all the above prerequisites necessary to bring up the cnxk board. - Follow the DPDK :doc:`../linux_gsg/index` to setup the basic DPDK environment. Debugging Options ----------------- .. _table_cnxk_common_debug_options: .. table:: cnxk common debug options +---+------------+-------------------------------------------------------+ | # | Component | EAL log command | +===+============+=======================================================+ | 1 | Common | --log-level='pmd\.cnxk\.base,8' | +---+------------+-------------------------------------------------------+ | 2 | Mailbox | --log-level='pmd\.cnxk\.mbox,8' | +---+------------+-------------------------------------------------------+ Debugfs support ~~~~~~~~~~~~~~~ The **RVU AF Linux kernel driver** provides support to dump RVU blocks context or stats using debugfs. Enable ``debugfs`` by: 1. Compile kernel with debugfs enabled, i.e ``CONFIG_DEBUGFS=y``. 2. Boot OCTEON CN9K/CN10K with debugfs supported kernel. 3. Verify ``debugfs`` mounted by default "mount | grep -i debugfs" or mount it manually by using. .. code-block:: console # mount -t debugfs none /sys/kernel/debug Currently ``debugfs`` supports the following RVU blocks NIX, NPA, NPC, NDC, SSO & RPM. The file structure under ``/sys/kernel/debug`` is as follows .. code-block:: console octeontx2/ | cn10k/ |-- rpm | |-- rpm0 | | '-- lmac0 | | '-- stats | |-- rpm1 | | |-- lmac0 | | | '-- stats | | '-- lmac1 | | '-- stats | '-- rpm2 | '-- lmac0 | '-- stats |-- cpt | |-- cpt_engines_info | |-- cpt_engines_sts | |-- cpt_err_info | |-- cpt_lfs_info | '-- cpt_pc |---- nix | |-- cq_ctx | |-- ndc_rx_cache | |-- ndc_rx_hits_miss | |-- ndc_tx_cache | |-- ndc_tx_hits_miss | |-- qsize | |-- rq_ctx | '-- sq_ctx |-- npa | |-- aura_ctx | |-- ndc_cache | |-- ndc_hits_miss | |-- pool_ctx | '-- qsize |-- npc | |-- mcam_info | |-- mcam_rules | '-- rx_miss_act_stats |-- rsrc_alloc '-- sso |-- hws | '-- sso_hws_info '-- hwgrp |-- sso_hwgrp_aq_thresh |-- sso_hwgrp_iaq_walk |-- sso_hwgrp_pc |-- sso_hwgrp_free_list_walk |-- sso_hwgrp_ient_walk '-- sso_hwgrp_taq_walk RVU block LF allocation: .. code-block:: console cat /sys/kernel/debug/cn10k/rsrc_alloc pcifunc NPA NIX SSO GROUP SSOWS TIM CPT PF1 0 0 PF4 1 PF13 0, 1 0, 1 0 RPM example usage: .. code-block:: console cat /sys/kernel/debug/cn10k/rpm/rpm0/lmac0/stats =======Link Status====== Link is UP 25000 Mbps =======NIX RX_STATS(rpm port level)====== rx_ucast_frames: 0 rx_mcast_frames: 0 rx_bcast_frames: 0 rx_frames: 0 rx_bytes: 0 rx_drops: 0 rx_errors: 0 =======NIX TX_STATS(rpm port level)====== tx_ucast_frames: 0 tx_mcast_frames: 0 tx_bcast_frames: 0 tx_frames: 0 tx_bytes: 0 tx_drops: 0 =======rpm RX_STATS====== Octets of received packets: 0 Octets of received packets with out error: 0 Received packets with alignment errors: 0 Control/PAUSE packets received: 0 Packets received with Frame too long Errors: 0 Packets received with a1nrange length Errors: 0 Received packets: 0 Packets received with FrameCheckSequenceErrors: 0 Packets received with VLAN header: 0 Error packets: 0 Packets received with unicast DMAC: 0 Packets received with multicast DMAC: 0 Packets received with broadcast DMAC: 0 Dropped packets: 0 Total frames received on interface: 0 Packets received with an octet count < 64: 0 Packets received with an octet count == 64: 0 Packets received with an octet count of 65–127: 0 Packets received with an octet count of 128-255: 0 Packets received with an octet count of 256-511: 0 Packets received with an octet count of 512-1023: 0 Packets received with an octet count of 1024-1518: 0 Packets received with an octet count of > 1518: 0 Oversized Packets: 0 Jabber Packets: 0 Fragmented Packets: 0 CBFC(class based flow control) pause frames received for class 0: 0 CBFC pause frames received for class 1: 0 CBFC pause frames received for class 2: 0 CBFC pause frames received for class 3: 0 CBFC pause frames received for class 4: 0 CBFC pause frames received for class 5: 0 CBFC pause frames received for class 6: 0 CBFC pause frames received for class 7: 0 CBFC pause frames received for class 8: 0 CBFC pause frames received for class 9: 0 CBFC pause frames received for class 10: 0 CBFC pause frames received for class 11: 0 CBFC pause frames received for class 12: 0 CBFC pause frames received for class 13: 0 CBFC pause frames received for class 14: 0 CBFC pause frames received for class 15: 0 MAC control packets received: 0 =======rpm TX_STATS====== Total octets sent on the interface: 0 Total octets transmitted OK: 0 Control/Pause frames sent: 0 Total frames transmitted OK: 0 Total frames sent with VLAN header: 0 Error Packets: 0 Packets sent to unicast DMAC: 0 Packets sent to the multicast DMAC: 0 Packets sent to a broadcast DMAC: 0 Packets sent with an octet count == 64: 0 Packets sent with an octet count of 65–127: 0 Packets sent with an octet count of 128-255: 0 Packets sent with an octet count of 256-511: 0 Packets sent with an octet count of 512-1023: 0 Packets sent with an octet count of 1024-1518: 0 Packets sent with an octet count of > 1518: 0 CBFC(class based flow control) pause frames transmitted for class 0: 0 CBFC pause frames transmitted for class 1: 0 CBFC pause frames transmitted for class 2: 0 CBFC pause frames transmitted for class 3: 0 CBFC pause frames transmitted for class 4: 0 CBFC pause frames transmitted for class 5: 0 CBFC pause frames transmitted for class 6: 0 CBFC pause frames transmitted for class 7: 0 CBFC pause frames transmitted for class 8: 0 CBFC pause frames transmitted for class 9: 0 CBFC pause frames transmitted for class 10: 0 CBFC pause frames transmitted for class 11: 0 CBFC pause frames transmitted for class 12: 0 CBFC pause frames transmitted for class 13: 0 CBFC pause frames transmitted for class 14: 0 CBFC pause frames transmitted for class 15: 0 MAC control packets sent: 0 Total frames sent on the interface: 0 CPT example usage: .. code-block:: console cat /sys/kernel/debug/cn10k/cpt/cpt_pc CPT instruction requests 0 CPT instruction latency 0 CPT NCB read requests 0 CPT NCB read latency 0 CPT read requests caused by UC fills 0 CPT active cycles pc 1395642 CPT clock count pc 5579867595493 NIX example usage: .. code-block:: console Usage: echo [cq number/all] > /sys/kernel/debug/cn10k/nix/cq_ctx cat /sys/kernel/debug/cn10k/nix/cq_ctx echo 0 0 > /sys/kernel/debug/cn10k/nix/cq_ctx cat /sys/kernel/debug/cn10k/nix/cq_ctx =====cq_ctx for nixlf:0 and qidx:0 is===== W0: base 158ef1a00 W1: wrptr 0 W1: avg_con 0 W1: cint_idx 0 W1: cq_err 0 W1: qint_idx 0 W1: bpid 0 W1: bp_ena 0 W2: update_time 31043 W2:avg_level 255 W2: head 0 W2:tail 0 W3: cq_err_int_ena 5 W3:cq_err_int 0 W3: qsize 4 W3:caching 1 W3: substream 0x000 W3: ena 1 W3: drop_ena 1 W3: drop 64 W3: bp 0 NPA example usage: .. code-block:: console Usage: echo [pool number/all] > /sys/kernel/debug/cn10k/npa/pool_ctx cat /sys/kernel/debug/cn10k/npa/pool_ctx echo 0 0 > /sys/kernel/debug/cn10k/npa/pool_ctx cat /sys/kernel/debug/cn10k/npa/pool_ctx ======POOL : 0======= W0: Stack base 1375bff00 W1: ena 1 W1: nat_align 1 W1: stack_caching 1 W1: stack_way_mask 0 W1: buf_offset 1 W1: buf_size 19 W2: stack_max_pages 24315 W2: stack_pages 24314 W3: op_pc 267456 W4: stack_offset 2 W4: shift 5 W4: avg_level 255 W4: avg_con 0 W4: fc_ena 0 W4: fc_stype 0 W4: fc_hyst_bits 0 W4: fc_up_crossing 0 W4: update_time 62993 W5: fc_addr 0 W6: ptr_start 1593adf00 W7: ptr_end 180000000 W8: err_int 0 W8: err_int_ena 7 W8: thresh_int 0 W8: thresh_int_ena 0 W8: thresh_up 0 W8: thresh_qint_idx 0 W8: err_qint_idx 0 NPC example usage: .. code-block:: console cat /sys/kernel/debug/cn10k/npc/mcam_info NPC MCAM info: RX keywidth : 224bits TX keywidth : 224bits MCAM entries : 2048 Reserved : 158 Available : 1890 MCAM counters : 512 Reserved : 1 Available : 511 SSO example usage: .. code-block:: console Usage: echo [/all] > /sys/kernel/debug/cn10k/sso/hws/sso_hws_info echo 0 > /sys/kernel/debug/cn10k/sso/hws/sso_hws_info ================================================== SSOW HWS[0] Arbitration State 0x0 SSOW HWS[0] Guest Machine Control 0x0 SSOW HWS[0] SET[0] Group Mask[0] 0xffffffffffffffff SSOW HWS[0] SET[0] Group Mask[1] 0xffffffffffffffff SSOW HWS[0] SET[0] Group Mask[2] 0xffffffffffffffff SSOW HWS[0] SET[0] Group Mask[3] 0xffffffffffffffff SSOW HWS[0] SET[1] Group Mask[0] 0xffffffffffffffff SSOW HWS[0] SET[1] Group Mask[1] 0xffffffffffffffff SSOW HWS[0] SET[1] Group Mask[2] 0xffffffffffffffff SSOW HWS[0] SET[1] Group Mask[3] 0xffffffffffffffff ================================================== Compile DPDK ------------ DPDK may be compiled either natively on OCTEON CN9K/CN10K platform or cross-compiled on an x86 based platform. Native Compilation ~~~~~~~~~~~~~~~~~~ .. code-block:: console meson build ninja -C build Cross Compilation ~~~~~~~~~~~~~~~~~ Refer to :doc:`../linux_gsg/cross_build_dpdk_for_arm64` for generic arm64 details. CN9K: .. code-block:: console meson build --cross-file config/arm/arm64_cn9k_linux_gcc ninja -C build CN10K: .. code-block:: console meson build --cross-file config/arm/arm64_cn10k_linux_gcc ninja -C build .. note:: By default, meson cross compilation uses ``aarch64-linux-gnu-gcc`` toolchain, if Marvell toolchain is available then it can be used by overriding the c, cpp, ar, strip ``binaries`` attributes to respective Marvell toolchain binaries in ``config/arm/arm64_cn10k_linux_gcc`` file.