# BSD LICENSE # # Copyright(c) 2010-2017 Intel Corporation. All rights reserved. # Copyright(c) 2014-2015 6WIND S.A. # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # * Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # * Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. # * Neither the name of Intel Corporation nor the names of its # contributors may be used to endorse or promote products derived # from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. include $(RTE_SDK)/mk/internal/rte.compile-pre.mk include $(RTE_SDK)/mk/internal/rte.install-pre.mk include $(RTE_SDK)/mk/internal/rte.clean-pre.mk include $(RTE_SDK)/mk/internal/rte.build-pre.mk # VPATH contains at least SRCDIR VPATH += $(SRCDIR) _BUILD = $(APP) _INSTALL = $(INSTALL-FILES-y) $(SYMLINK-FILES-y) _INSTALL += $(RTE_OUTPUT)/app/$(APP) $(RTE_OUTPUT)/app/$(APP).map POSTINSTALL += target-appinstall _CLEAN = doclean POSTCLEAN += target-appclean ifeq ($(NO_LDSCRIPT),) LDSCRIPT = $(RTE_LDSCRIPT) endif # Link only the libraries used in the application LDFLAGS += --as-needed # default path for libs _LDLIBS-y += -L$(RTE_SDK_BIN)/lib # # Order is important: from higher level to lower level # _LDLIBS-$(CONFIG_RTE_LIBRTE_PIPELINE) += -lrte_pipeline _LDLIBS-$(CONFIG_RTE_LIBRTE_TABLE) += -lrte_table _LDLIBS-$(CONFIG_RTE_LIBRTE_PORT) += -lrte_port _LDLIBS-$(CONFIG_RTE_LIBRTE_PDUMP) += -lrte_pdump _LDLIBS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += -lrte_distributor _LDLIBS-$(CONFIG_RTE_LIBRTE_IP_FRAG) += -lrte_ip_frag _LDLIBS-$(CONFIG_RTE_LIBRTE_METER) += -lrte_meter _LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lrte_sched _LDLIBS-$(CONFIG_RTE_LIBRTE_LPM) += -lrte_lpm # librte_acl needs --whole-archive because of weak functions _LDLIBS-$(CONFIG_RTE_LIBRTE_ACL) += --whole-archive _LDLIBS-$(CONFIG_RTE_LIBRTE_ACL) += -lrte_acl _LDLIBS-$(CONFIG_RTE_LIBRTE_ACL) += --no-whole-archive _LDLIBS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += -lrte_jobstats _LDLIBS-$(CONFIG_RTE_LIBRTE_METRICS) += -lrte_metrics _LDLIBS-$(CONFIG_RTE_LIBRTE_BITRATE) += -lrte_bitratestats _LDLIBS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += -lrte_latencystats _LDLIBS-$(CONFIG_RTE_LIBRTE_POWER) += -lrte_power _LDLIBS-$(CONFIG_RTE_LIBRTE_TIMER) += -lrte_timer _LDLIBS-$(CONFIG_RTE_LIBRTE_EFD) += -lrte_efd _LDLIBS-$(CONFIG_RTE_LIBRTE_CFGFILE) += -lrte_cfgfile _LDLIBS-y += --whole-archive _LDLIBS-$(CONFIG_RTE_LIBRTE_HASH) += -lrte_hash _LDLIBS-$(CONFIG_RTE_LIBRTE_VHOST) += -lrte_vhost _LDLIBS-$(CONFIG_RTE_LIBRTE_KVARGS) += -lrte_kvargs _LDLIBS-$(CONFIG_RTE_LIBRTE_MBUF) += -lrte_mbuf _LDLIBS-$(CONFIG_RTE_LIBRTE_NET) += -lrte_net _LDLIBS-$(CONFIG_RTE_LIBRTE_ETHER) += -lrte_ethdev _LDLIBS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += -lrte_cryptodev _LDLIBS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += -lrte_eventdev _LDLIBS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += -lrte_mempool _LDLIBS-$(CONFIG_RTE_DRIVER_MEMPOOL_RING) += -lrte_mempool_ring _LDLIBS-$(CONFIG_RTE_LIBRTE_RING) += -lrte_ring _LDLIBS-$(CONFIG_RTE_LIBRTE_EAL) += -lrte_eal _LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE) += -lrte_cmdline _LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER) += -lrte_reorder ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y) _LDLIBS-$(CONFIG_RTE_LIBRTE_KNI) += -lrte_kni endif ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n) # plugins (link only if static libraries) _LDLIBS-$(CONFIG_RTE_DRIVER_MEMPOOL_STACK) += -lrte_mempool_stack _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AF_PACKET) += -lrte_pmd_af_packet _LDLIBS-$(CONFIG_RTE_LIBRTE_AVP_PMD) += -lrte_pmd_avp _LDLIBS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += -lrte_pmd_bnx2x -lz _LDLIBS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += -lrte_pmd_bnxt _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += -lrte_pmd_bond _LDLIBS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += -lrte_pmd_cxgbe _LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000 _LDLIBS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += -lrte_pmd_ena _LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic _LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k _LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e _LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe ifeq ($(CONFIG_RTE_LIBRTE_KNI),y) _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += -lrte_pmd_kni endif _LDLIBS-$(CONFIG_RTE_LIBRTE_LIO_PMD) += -lrte_pmd_lio _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4 -libverbs _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5 -libverbs _LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += -lrte_pmd_nfp -lm _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += -lrte_pmd_null _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP) += -lrte_pmd_pcap -lpcap _LDLIBS-$(CONFIG_RTE_LIBRTE_QEDE_PMD) += -lrte_pmd_qede _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_RING) += -lrte_pmd_ring _LDLIBS-$(CONFIG_RTE_LIBRTE_SFC_EFX_PMD) += -lrte_pmd_sfc_efx _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SZEDATA2) += -lrte_pmd_szedata2 -lsze2 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_TAP) += -lrte_pmd_tap _LDLIBS-$(CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD) += -lrte_pmd_thunderx_nicvf -lm _LDLIBS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += -lrte_pmd_virtio ifeq ($(CONFIG_RTE_LIBRTE_VHOST),y) _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_VHOST) += -lrte_pmd_vhost endif # $(CONFIG_RTE_LIBRTE_VHOST) _LDLIBS-$(CONFIG_RTE_LIBRTE_VMXNET3_PMD) += -lrte_pmd_vmxnet3_uio _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_XENVIRT) += -lrte_pmd_xenvirt -lxenstore ifeq ($(CONFIG_RTE_LIBRTE_CRYPTODEV),y) _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += -lrte_pmd_aesni_mb _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM) += -lrte_pmd_aesni_gcm -lisal_crypto _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL) += -lrte_pmd_openssl -lcrypto _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO) += -lrte_pmd_null_crypto _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += -lrte_pmd_qat -lcrypto _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += -lrte_pmd_snow3g _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += -L$(LIBSSO_SNOW3G_PATH)/build -lsso_snow3g _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += -lrte_pmd_kasumi _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += -L$(LIBSSO_KASUMI_PATH)/build -lsso_kasumi _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -lrte_pmd_zuc _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -L$(LIBSSO_ZUC_PATH)/build -lsso_zuc _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += -lrte_pmd_armv8 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += -L$(ARMV8_CRYPTO_LIB_PATH) -larmv8_crypto _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += -lrte_pmd_crypto_scheduler endif # CONFIG_RTE_LIBRTE_CRYPTODEV ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y) _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV) += -lrte_pmd_skeleton_event _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += -lrte_pmd_sw_event _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF) += -lrte_pmd_octeontx_ssovf endif # CONFIG_RTE_LIBRTE_EVENTDEV endif # !CONFIG_RTE_BUILD_SHARED_LIBS _LDLIBS-y += --no-whole-archive ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n) # The static libraries do not know their dependencies. # So linking with static library requires explicit dependencies. _LDLIBS-$(CONFIG_RTE_LIBRTE_EAL) += -lrt _LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lm _LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lrt _LDLIBS-$(CONFIG_RTE_LIBRTE_METER) += -lm ifeq ($(CONFIG_RTE_LIBRTE_VHOST_NUMA),y) _LDLIBS-$(CONFIG_RTE_LIBRTE_VHOST) += -lnuma endif _LDLIBS-$(CONFIG_RTE_PORT_PCAP) += -lpcap endif # !CONFIG_RTE_BUILD_SHARED_LIBS _LDLIBS-y += $(EXECENV_LDLIBS) LDLIBS += $(_LDLIBS-y) $(CPU_LDLIBS) $(EXTRA_LDLIBS) # all the words except the first one allbutfirst = $(wordlist 2,$(words $(1)),$(1)) # Eliminate duplicates without sorting, only keep the last occurrence filter-libs = \ $(if $(1),$(strip\ $(if \ $(and \ $(filter $(firstword $(1)),$(call allbutfirst,$(1))),\ $(filter -l%,$(firstword $(1)))),\ ,\ $(firstword $(1))) \ $(call filter-libs,$(call allbutfirst,$(1))))) LDLIBS := $(call filter-libs,$(LDLIBS)) ifeq ($(RTE_DEVEL_BUILD)$(CONFIG_RTE_BUILD_SHARED_LIB),yy) LDFLAGS += -rpath=$(RTE_SDK_BIN)/lib endif MAPFLAGS = -Map=$@.map --cref .PHONY: all all: install .PHONY: install install: build _postinstall _postinstall: build .PHONY: build build: _postbuild exe2cmd = $(strip $(call dotfile,$(patsubst %,%.cmd,$(1)))) ifeq ($(LINK_USING_CC),1) O_TO_EXE = $(CC) -o $@ $(CFLAGS) $(OBJS-y) $(call linkerprefix, \ $(LDLIBS) $(LDFLAGS) $(LDFLAGS_$(@)) $(EXTRA_LDFLAGS) \ $(MAPFLAGS)) else O_TO_EXE = $(LD) -o $@ $(OBJS-y) \ $(LDLIBS) $(LDFLAGS) $(LDFLAGS_$(@)) $(EXTRA_LDFLAGS) \ $(MAPFLAGS) endif O_TO_EXE_STR = $(subst ','\'',$(O_TO_EXE)) #'# fix syntax highlight O_TO_EXE_DISP = $(if $(V),"$(O_TO_EXE_STR)"," LD $(@)") O_TO_EXE_CMD = "cmd_$@ = $(O_TO_EXE_STR)" O_TO_EXE_DO = @set -e; \ echo $(O_TO_EXE_DISP); \ $(O_TO_EXE) && \ echo $(O_TO_EXE_CMD) > $(call exe2cmd,$(@)) -include .$(APP).cmd # path where libraries are retrieved LDLIBS_PATH := $(subst -Wl$(comma)-L,,$(filter -Wl$(comma)-L%,$(LDLIBS))) LDLIBS_PATH += $(subst -L,,$(filter -L%,$(LDLIBS))) # list of .a files that are linked to this application LDLIBS_NAMES := $(patsubst -l%,lib%.a,$(filter -l%,$(LDLIBS))) LDLIBS_NAMES += $(patsubst -Wl$(comma)-l%,lib%.a,$(filter -Wl$(comma)-l%,$(LDLIBS))) # list of found libraries files (useful for deps). If not found, the # library is silently ignored and dep won't be checked LDLIBS_FILES := $(wildcard $(foreach dir,$(LDLIBS_PATH),\ $(addprefix $(dir)/,$(LDLIBS_NAMES)))) # # Compile executable file if needed # $(APP): $(OBJS-y) $(LDLIBS_FILES) $(DEP_$(APP)) $(LDSCRIPT) FORCE @[ -d $(dir $@) ] || mkdir -p $(dir $@) $(if $(D),\ @echo -n "$< -> $@ " ; \ echo -n "file_missing=$(call boolean,$(file_missing)) " ; \ echo -n "cmdline_changed=$(call boolean,$(call cmdline_changed,$(O_TO_EXE_STR))) " ; \ echo -n "depfile_missing=$(call boolean,$(depfile_missing)) " ; \ echo "depfile_newer=$(call boolean,$(depfile_newer)) ") $(if $(or \ $(file_missing),\ $(call cmdline_changed,$(O_TO_EXE_STR)),\ $(depfile_missing),\ $(depfile_newer)),\ $(O_TO_EXE_DO)) # # install app in $(RTE_OUTPUT)/app # $(RTE_OUTPUT)/app/$(APP): $(APP) @echo " INSTALL-APP $(APP)" @[ -d $(RTE_OUTPUT)/app ] || mkdir -p $(RTE_OUTPUT)/app $(Q)cp -f $(APP) $(RTE_OUTPUT)/app # # install app map file in $(RTE_OUTPUT)/app # $(RTE_OUTPUT)/app/$(APP).map: $(APP) @echo " INSTALL-MAP $(APP).map" @[ -d $(RTE_OUTPUT)/app ] || mkdir -p $(RTE_OUTPUT)/app $(Q)cp -f $(APP).map $(RTE_OUTPUT)/app # # Clean all generated files # .PHONY: clean clean: _postclean $(Q)rm -f $(_BUILD_TARGETS) $(_INSTALL_TARGETS) $(_CLEAN_TARGETS) .PHONY: doclean doclean: $(Q)rm -rf $(APP) $(OBJS-all) $(DEPS-all) $(DEPSTMP-all) \ $(CMDS-all) $(INSTALL-FILES-all) .$(APP).cmd $(APP).map include $(RTE_SDK)/mk/internal/rte.compile-post.mk include $(RTE_SDK)/mk/internal/rte.install-post.mk include $(RTE_SDK)/mk/internal/rte.clean-post.mk include $(RTE_SDK)/mk/internal/rte.build-post.mk ifneq ($(wildcard $(RTE_SDK)/mk/target/$(RTE_TARGET)/rte.app.mk),) include $(RTE_SDK)/mk/target/$(RTE_TARGET)/rte.app.mk else include $(RTE_SDK)/mk/target/generic/rte.app.mk endif .PHONY: FORCE FORCE: