+ /*
+ * Layers bits could be localization, but usually the compiler will
+ * help to do the optimization work for source code.
+ * If no decap actions, use the layers directly.
+ */
+ if (!(dev_flow->act_flags & MLX5_FLOW_ACTION_DECAP))
+ return dev_flow->handle->layers;
+ /* Convert L3 layers with decap action. */
+ if (dev_flow->handle->layers & MLX5_FLOW_LAYER_INNER_L3_IPV4)
+ layers |= MLX5_FLOW_LAYER_OUTER_L3_IPV4;
+ else if (dev_flow->handle->layers & MLX5_FLOW_LAYER_INNER_L3_IPV6)
+ layers |= MLX5_FLOW_LAYER_OUTER_L3_IPV6;
+ /* Convert L4 layers with decap action. */
+ if (dev_flow->handle->layers & MLX5_FLOW_LAYER_INNER_L4_TCP)
+ layers |= MLX5_FLOW_LAYER_OUTER_L4_TCP;
+ else if (dev_flow->handle->layers & MLX5_FLOW_LAYER_INNER_L4_UDP)
+ layers |= MLX5_FLOW_LAYER_OUTER_L4_UDP;
+ return layers;
+}
+
+/**
+ * Get metadata split action information.
+ *
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[out] qrss
+ * Pointer to the return pointer.
+ * @param[out] qrss_type
+ * Pointer to the action type to return. RTE_FLOW_ACTION_TYPE_END is returned
+ * if no QUEUE/RSS is found.
+ * @param[out] encap_idx
+ * Pointer to the index of the encap action if exists, otherwise the last
+ * action index.
+ *
+ * @return
+ * Total number of actions.
+ */
+static int
+flow_parse_metadata_split_actions_info(const struct rte_flow_action actions[],
+ const struct rte_flow_action **qrss,
+ int *encap_idx)
+{
+ const struct rte_flow_action_raw_encap *raw_encap;
+ int actions_n = 0;
+ int raw_decap_idx = -1;
+
+ *encap_idx = -1;
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
+ case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
+ *encap_idx = actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
+ raw_decap_idx = actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
+ raw_encap = actions->conf;
+ if (raw_encap->size > MLX5_ENCAPSULATION_DECISION_SIZE)
+ *encap_idx = raw_decap_idx != -1 ?
+ raw_decap_idx : actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_QUEUE:
+ case RTE_FLOW_ACTION_TYPE_RSS:
+ *qrss = actions;
+ break;
+ default:
+ break;
+ }
+ actions_n++;
+ }
+ if (*encap_idx == -1)
+ *encap_idx = actions_n;
+ /* Count RTE_FLOW_ACTION_TYPE_END. */
+ return actions_n + 1;
+}
+
+/**
+ * Check meter action from the action list.
+ *
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[out] mtr
+ * Pointer to the meter exist flag.
+ *
+ * @return
+ * Total number of actions.
+ */
+static int
+flow_check_meter_action(const struct rte_flow_action actions[], uint32_t *mtr)
+{
+ int actions_n = 0;
+
+ MLX5_ASSERT(mtr);
+ *mtr = 0;
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_METER:
+ *mtr = 1;
+ break;
+ default:
+ break;
+ }
+ actions_n++;
+ }
+ /* Count RTE_FLOW_ACTION_TYPE_END. */
+ return actions_n + 1;
+}
+
+/**
+ * Check if the flow should be splited due to hairpin.
+ * The reason for the split is that in current HW we can't
+ * support encap on Rx, so if a flow have encap we move it
+ * to Tx.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ *
+ * @return
+ * > 0 the number of actions and the flow should be split,
+ * 0 when no split required.
+ */
+static int
+flow_check_hairpin_split(struct rte_eth_dev *dev,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_action actions[])
+{
+ int queue_action = 0;
+ int action_n = 0;
+ int encap = 0;
+ const struct rte_flow_action_queue *queue;
+ const struct rte_flow_action_rss *rss;
+ const struct rte_flow_action_raw_encap *raw_encap;
+
+ if (!attr->ingress)
+ return 0;
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_QUEUE:
+ queue = actions->conf;
+ if (queue == NULL)
+ return 0;
+ if (mlx5_rxq_get_type(dev, queue->index) !=
+ MLX5_RXQ_TYPE_HAIRPIN)
+ return 0;
+ queue_action = 1;
+ action_n++;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RSS:
+ rss = actions->conf;
+ if (rss == NULL || rss->queue_num == 0)
+ return 0;
+ if (mlx5_rxq_get_type(dev, rss->queue[0]) !=
+ MLX5_RXQ_TYPE_HAIRPIN)
+ return 0;
+ queue_action = 1;
+ action_n++;
+ break;
+ case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
+ case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
+ encap = 1;
+ action_n++;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
+ raw_encap = actions->conf;
+ if (raw_encap->size >
+ (sizeof(struct rte_flow_item_eth) +
+ sizeof(struct rte_flow_item_ipv4)))
+ encap = 1;
+ action_n++;
+ break;
+ default:
+ action_n++;
+ break;
+ }
+ }
+ if (encap == 1 && queue_action)
+ return action_n;
+ return 0;
+}
+
+/* Declare flow create/destroy prototype in advance. */
+static uint32_t
+flow_list_create(struct rte_eth_dev *dev, uint32_t *list,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ bool external, struct rte_flow_error *error);
+
+static void
+flow_list_destroy(struct rte_eth_dev *dev, uint32_t *list,
+ uint32_t flow_idx);
+
+/**
+ * Add a flow of copying flow metadata registers in RX_CP_TBL.
+ *
+ * As mark_id is unique, if there's already a registered flow for the mark_id,
+ * return by increasing the reference counter of the resource. Otherwise, create
+ * the resource (mcp_res) and flow.
+ *
+ * Flow looks like,
+ * - If ingress port is ANY and reg_c[1] is mark_id,
+ * flow_tag := mark_id, reg_b := reg_c[0] and jump to RX_ACT_TBL.
+ *
+ * For default flow (zero mark_id), flow is like,
+ * - If ingress port is ANY,
+ * reg_b := reg_c[0] and jump to RX_ACT_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param mark_id
+ * ID of MARK action, zero means default flow for META.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * Associated resource on success, NULL otherwise and rte_errno is set.
+ */
+static struct mlx5_flow_mreg_copy_resource *
+flow_mreg_add_copy_action(struct rte_eth_dev *dev, uint32_t mark_id,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct rte_flow_attr attr = {
+ .group = MLX5_FLOW_MREG_CP_TABLE_GROUP,
+ .ingress = 1,
+ };
+ struct mlx5_rte_flow_item_tag tag_spec = {
+ .data = mark_id,
+ };
+ struct rte_flow_item items[] = {
+ [1] = { .type = RTE_FLOW_ITEM_TYPE_END, },
+ };
+ struct rte_flow_action_mark ftag = {
+ .id = mark_id,
+ };
+ struct mlx5_flow_action_copy_mreg cp_mreg = {
+ .dst = REG_B,
+ .src = 0,
+ };
+ struct rte_flow_action_jump jump = {
+ .group = MLX5_FLOW_MREG_ACT_TABLE_GROUP,
+ };
+ struct rte_flow_action actions[] = {
+ [3] = { .type = RTE_FLOW_ACTION_TYPE_END, },
+ };
+ struct mlx5_flow_mreg_copy_resource *mcp_res;
+ uint32_t idx = 0;
+ int ret;
+
+ /* Fill the register fileds in the flow. */
+ ret = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK, 0, error);
+ if (ret < 0)
+ return NULL;
+ tag_spec.id = ret;
+ ret = mlx5_flow_get_reg_id(dev, MLX5_METADATA_RX, 0, error);
+ if (ret < 0)
+ return NULL;
+ cp_mreg.src = ret;
+ /* Check if already registered. */
+ MLX5_ASSERT(priv->mreg_cp_tbl);
+ mcp_res = (void *)mlx5_hlist_lookup(priv->mreg_cp_tbl, mark_id);
+ if (mcp_res) {
+ /* For non-default rule. */
+ if (mark_id != MLX5_DEFAULT_COPY_ID)
+ mcp_res->refcnt++;
+ MLX5_ASSERT(mark_id != MLX5_DEFAULT_COPY_ID ||
+ mcp_res->refcnt == 1);
+ return mcp_res;
+ }
+ /* Provide the full width of FLAG specific value. */
+ if (mark_id == (priv->sh->dv_regc0_mask & MLX5_FLOW_MARK_DEFAULT))
+ tag_spec.data = MLX5_FLOW_MARK_DEFAULT;
+ /* Build a new flow. */
+ if (mark_id != MLX5_DEFAULT_COPY_ID) {
+ items[0] = (struct rte_flow_item){
+ .type = MLX5_RTE_FLOW_ITEM_TYPE_TAG,
+ .spec = &tag_spec,
+ };
+ items[1] = (struct rte_flow_item){
+ .type = RTE_FLOW_ITEM_TYPE_END,
+ };
+ actions[0] = (struct rte_flow_action){
+ .type = MLX5_RTE_FLOW_ACTION_TYPE_MARK,
+ .conf = &ftag,
+ };
+ actions[1] = (struct rte_flow_action){
+ .type = MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
+ .conf = &cp_mreg,
+ };
+ actions[2] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_JUMP,
+ .conf = &jump,
+ };
+ actions[3] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_END,
+ };
+ } else {
+ /* Default rule, wildcard match. */
+ attr.priority = MLX5_FLOW_PRIO_RSVD;
+ items[0] = (struct rte_flow_item){
+ .type = RTE_FLOW_ITEM_TYPE_END,
+ };
+ actions[0] = (struct rte_flow_action){
+ .type = MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
+ .conf = &cp_mreg,
+ };
+ actions[1] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_JUMP,
+ .conf = &jump,
+ };
+ actions[2] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_END,
+ };
+ }
+ /* Build a new entry. */
+ mcp_res = mlx5_ipool_zmalloc(priv->sh->ipool[MLX5_IPOOL_MCP], &idx);
+ if (!mcp_res) {
+ rte_errno = ENOMEM;
+ return NULL;
+ }
+ mcp_res->idx = idx;
+ /*
+ * The copy Flows are not included in any list. There
+ * ones are referenced from other Flows and can not
+ * be applied, removed, deleted in ardbitrary order
+ * by list traversing.
+ */
+ mcp_res->rix_flow = flow_list_create(dev, NULL, &attr, items,
+ actions, false, error);
+ if (!mcp_res->rix_flow)
+ goto error;
+ mcp_res->refcnt++;
+ mcp_res->hlist_ent.key = mark_id;
+ ret = mlx5_hlist_insert(priv->mreg_cp_tbl,
+ &mcp_res->hlist_ent);
+ MLX5_ASSERT(!ret);
+ if (ret)
+ goto error;
+ return mcp_res;
+error:
+ if (mcp_res->rix_flow)
+ flow_list_destroy(dev, NULL, mcp_res->rix_flow);
+ mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_MCP], mcp_res->idx);
+ return NULL;
+}
+
+/**
+ * Release flow in RX_CP_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @flow
+ * Parent flow for wich copying is provided.
+ */
+static void
+flow_mreg_del_copy_action(struct rte_eth_dev *dev,
+ struct rte_flow *flow)
+{
+ struct mlx5_flow_mreg_copy_resource *mcp_res;
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ if (!flow->rix_mreg_copy)
+ return;
+ mcp_res = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_MCP],
+ flow->rix_mreg_copy);
+ if (!mcp_res || !priv->mreg_cp_tbl)
+ return;
+ if (flow->copy_applied) {
+ MLX5_ASSERT(mcp_res->appcnt);
+ flow->copy_applied = 0;
+ --mcp_res->appcnt;
+ if (!mcp_res->appcnt) {
+ struct rte_flow *mcp_flow = mlx5_ipool_get
+ (priv->sh->ipool[MLX5_IPOOL_RTE_FLOW],
+ mcp_res->rix_flow);
+
+ if (mcp_flow)
+ flow_drv_remove(dev, mcp_flow);
+ }
+ }
+ /*
+ * We do not check availability of metadata registers here,
+ * because copy resources are not allocated in this case.
+ */
+ if (--mcp_res->refcnt)
+ return;
+ MLX5_ASSERT(mcp_res->rix_flow);
+ flow_list_destroy(dev, NULL, mcp_res->rix_flow);
+ mlx5_hlist_remove(priv->mreg_cp_tbl, &mcp_res->hlist_ent);
+ mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_MCP], mcp_res->idx);
+ flow->rix_mreg_copy = 0;
+}
+
+/**
+ * Start flow in RX_CP_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @flow
+ * Parent flow for wich copying is provided.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_mreg_start_copy_action(struct rte_eth_dev *dev,
+ struct rte_flow *flow)
+{
+ struct mlx5_flow_mreg_copy_resource *mcp_res;
+ struct mlx5_priv *priv = dev->data->dev_private;
+ int ret;
+
+ if (!flow->rix_mreg_copy || flow->copy_applied)
+ return 0;
+ mcp_res = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_MCP],
+ flow->rix_mreg_copy);
+ if (!mcp_res)
+ return 0;
+ if (!mcp_res->appcnt) {
+ struct rte_flow *mcp_flow = mlx5_ipool_get
+ (priv->sh->ipool[MLX5_IPOOL_RTE_FLOW],
+ mcp_res->rix_flow);
+
+ if (mcp_flow) {
+ ret = flow_drv_apply(dev, mcp_flow, NULL);
+ if (ret)
+ return ret;
+ }
+ }
+ ++mcp_res->appcnt;
+ flow->copy_applied = 1;
+ return 0;
+}
+
+/**
+ * Stop flow in RX_CP_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @flow
+ * Parent flow for wich copying is provided.
+ */
+static void
+flow_mreg_stop_copy_action(struct rte_eth_dev *dev,
+ struct rte_flow *flow)
+{
+ struct mlx5_flow_mreg_copy_resource *mcp_res;
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ if (!flow->rix_mreg_copy || !flow->copy_applied)
+ return;
+ mcp_res = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_MCP],
+ flow->rix_mreg_copy);
+ if (!mcp_res)
+ return;
+ MLX5_ASSERT(mcp_res->appcnt);
+ --mcp_res->appcnt;
+ flow->copy_applied = 0;
+ if (!mcp_res->appcnt) {
+ struct rte_flow *mcp_flow = mlx5_ipool_get
+ (priv->sh->ipool[MLX5_IPOOL_RTE_FLOW],
+ mcp_res->rix_flow);
+
+ if (mcp_flow)
+ flow_drv_remove(dev, mcp_flow);
+ }
+}
+
+/**
+ * Remove the default copy action from RX_CP_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ */
+static void
+flow_mreg_del_default_copy_action(struct rte_eth_dev *dev)
+{
+ struct mlx5_flow_mreg_copy_resource *mcp_res;
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ /* Check if default flow is registered. */
+ if (!priv->mreg_cp_tbl)
+ return;
+ mcp_res = (void *)mlx5_hlist_lookup(priv->mreg_cp_tbl,
+ MLX5_DEFAULT_COPY_ID);
+ if (!mcp_res)
+ return;
+ MLX5_ASSERT(mcp_res->rix_flow);
+ flow_list_destroy(dev, NULL, mcp_res->rix_flow);
+ mlx5_hlist_remove(priv->mreg_cp_tbl, &mcp_res->hlist_ent);
+ mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_MCP], mcp_res->idx);
+}
+
+/**
+ * Add the default copy action in in RX_CP_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * 0 for success, negative value otherwise and rte_errno is set.
+ */
+static int
+flow_mreg_add_default_copy_action(struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_flow_mreg_copy_resource *mcp_res;
+
+ /* Check whether extensive metadata feature is engaged. */
+ if (!priv->config.dv_flow_en ||
+ priv->config.dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
+ !mlx5_flow_ext_mreg_supported(dev) ||
+ !priv->sh->dv_regc0_mask)
+ return 0;
+ mcp_res = flow_mreg_add_copy_action(dev, MLX5_DEFAULT_COPY_ID, error);
+ if (!mcp_res)
+ return -rte_errno;
+ return 0;
+}
+
+/**
+ * Add a flow of copying flow metadata registers in RX_CP_TBL.
+ *
+ * All the flow having Q/RSS action should be split by
+ * flow_mreg_split_qrss_prep() to pass by RX_CP_TBL. A flow in the RX_CP_TBL
+ * performs the following,
+ * - CQE->flow_tag := reg_c[1] (MARK)
+ * - CQE->flow_table_metadata (reg_b) := reg_c[0] (META)
+ * As CQE's flow_tag is not a register, it can't be simply copied from reg_c[1]
+ * but there should be a flow per each MARK ID set by MARK action.
+ *
+ * For the aforementioned reason, if there's a MARK action in flow's action
+ * list, a corresponding flow should be added to the RX_CP_TBL in order to copy
+ * the MARK ID to CQE's flow_tag like,
+ * - If reg_c[1] is mark_id,
+ * flow_tag := mark_id, reg_b := reg_c[0] and jump to RX_ACT_TBL.
+ *
+ * For SET_META action which stores value in reg_c[0], as the destination is
+ * also a flow metadata register (reg_b), adding a default flow is enough. Zero
+ * MARK ID means the default flow. The default flow looks like,
+ * - For all flow, reg_b := reg_c[0] and jump to RX_ACT_TBL.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param flow
+ * Pointer to flow structure.
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * 0 on success, negative value otherwise and rte_errno is set.
+ */
+static int
+flow_mreg_update_copy_table(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ const struct rte_flow_action *actions,
+ struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_config *config = &priv->config;
+ struct mlx5_flow_mreg_copy_resource *mcp_res;
+ const struct rte_flow_action_mark *mark;
+
+ /* Check whether extensive metadata feature is engaged. */
+ if (!config->dv_flow_en ||
+ config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
+ !mlx5_flow_ext_mreg_supported(dev) ||
+ !priv->sh->dv_regc0_mask)
+ return 0;
+ /* Find MARK action. */
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_FLAG:
+ mcp_res = flow_mreg_add_copy_action
+ (dev, MLX5_FLOW_MARK_DEFAULT, error);
+ if (!mcp_res)
+ return -rte_errno;
+ flow->rix_mreg_copy = mcp_res->idx;
+ if (dev->data->dev_started) {
+ mcp_res->appcnt++;
+ flow->copy_applied = 1;
+ }
+ return 0;
+ case RTE_FLOW_ACTION_TYPE_MARK:
+ mark = (const struct rte_flow_action_mark *)
+ actions->conf;
+ mcp_res =
+ flow_mreg_add_copy_action(dev, mark->id, error);
+ if (!mcp_res)
+ return -rte_errno;
+ flow->rix_mreg_copy = mcp_res->idx;
+ if (dev->data->dev_started) {
+ mcp_res->appcnt++;
+ flow->copy_applied = 1;
+ }
+ return 0;
+ default:
+ break;
+ }
+ }
+ return 0;
+}
+
+#define MLX5_MAX_SPLIT_ACTIONS 24
+#define MLX5_MAX_SPLIT_ITEMS 24
+
+/**
+ * Split the hairpin flow.
+ * Since HW can't support encap on Rx we move the encap to Tx.
+ * If the count action is after the encap then we also
+ * move the count action. in this case the count will also measure
+ * the outer bytes.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[out] actions_rx
+ * Rx flow actions.
+ * @param[out] actions_tx
+ * Tx flow actions..
+ * @param[out] pattern_tx
+ * The pattern items for the Tx flow.
+ * @param[out] flow_id
+ * The flow ID connected to this flow.
+ *
+ * @return
+ * 0 on success.
+ */
+static int
+flow_hairpin_split(struct rte_eth_dev *dev,
+ const struct rte_flow_action actions[],
+ struct rte_flow_action actions_rx[],
+ struct rte_flow_action actions_tx[],
+ struct rte_flow_item pattern_tx[],
+ uint32_t *flow_id)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ const struct rte_flow_action_raw_encap *raw_encap;
+ const struct rte_flow_action_raw_decap *raw_decap;
+ struct mlx5_rte_flow_action_set_tag *set_tag;
+ struct rte_flow_action *tag_action;
+ struct mlx5_rte_flow_item_tag *tag_item;
+ struct rte_flow_item *item;
+ char *addr;
+ int encap = 0;
+
+ mlx5_flow_id_get(priv->sh->flow_id_pool, flow_id);
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
+ case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
+ rte_memcpy(actions_tx, actions,
+ sizeof(struct rte_flow_action));
+ actions_tx++;
+ break;
+ case RTE_FLOW_ACTION_TYPE_COUNT:
+ if (encap) {
+ rte_memcpy(actions_tx, actions,
+ sizeof(struct rte_flow_action));
+ actions_tx++;
+ } else {
+ rte_memcpy(actions_rx, actions,
+ sizeof(struct rte_flow_action));
+ actions_rx++;
+ }
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
+ raw_encap = actions->conf;
+ if (raw_encap->size >
+ (sizeof(struct rte_flow_item_eth) +
+ sizeof(struct rte_flow_item_ipv4))) {
+ memcpy(actions_tx, actions,
+ sizeof(struct rte_flow_action));
+ actions_tx++;
+ encap = 1;
+ } else {
+ rte_memcpy(actions_rx, actions,
+ sizeof(struct rte_flow_action));
+ actions_rx++;
+ }
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
+ raw_decap = actions->conf;
+ if (raw_decap->size <
+ (sizeof(struct rte_flow_item_eth) +
+ sizeof(struct rte_flow_item_ipv4))) {
+ memcpy(actions_tx, actions,
+ sizeof(struct rte_flow_action));
+ actions_tx++;
+ } else {
+ rte_memcpy(actions_rx, actions,
+ sizeof(struct rte_flow_action));
+ actions_rx++;
+ }
+ break;
+ default:
+ rte_memcpy(actions_rx, actions,
+ sizeof(struct rte_flow_action));
+ actions_rx++;
+ break;
+ }
+ }
+ /* Add set meta action and end action for the Rx flow. */
+ tag_action = actions_rx;
+ tag_action->type = MLX5_RTE_FLOW_ACTION_TYPE_TAG;
+ actions_rx++;
+ rte_memcpy(actions_rx, actions, sizeof(struct rte_flow_action));
+ actions_rx++;
+ set_tag = (void *)actions_rx;
+ set_tag->id = mlx5_flow_get_reg_id(dev, MLX5_HAIRPIN_RX, 0, NULL);
+ MLX5_ASSERT(set_tag->id > REG_NONE);
+ set_tag->data = *flow_id;
+ tag_action->conf = set_tag;
+ /* Create Tx item list. */
+ rte_memcpy(actions_tx, actions, sizeof(struct rte_flow_action));
+ addr = (void *)&pattern_tx[2];
+ item = pattern_tx;
+ item->type = MLX5_RTE_FLOW_ITEM_TYPE_TAG;
+ tag_item = (void *)addr;
+ tag_item->data = *flow_id;
+ tag_item->id = mlx5_flow_get_reg_id(dev, MLX5_HAIRPIN_TX, 0, NULL);
+ MLX5_ASSERT(set_tag->id > REG_NONE);
+ item->spec = tag_item;
+ addr += sizeof(struct mlx5_rte_flow_item_tag);
+ tag_item = (void *)addr;
+ tag_item->data = UINT32_MAX;
+ tag_item->id = UINT16_MAX;
+ item->mask = tag_item;
+ addr += sizeof(struct mlx5_rte_flow_item_tag);
+ item->last = NULL;
+ item++;
+ item->type = RTE_FLOW_ITEM_TYPE_END;
+ return 0;
+}
+
+/**
+ * The last stage of splitting chain, just creates the subflow
+ * without any modification.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ * @param[in] flow
+ * Parent flow structure pointer.
+ * @param[in, out] sub_flow
+ * Pointer to return the created subflow, may be NULL.
+ * @param[in] prefix_layers
+ * Prefix subflow layers, may be 0.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] items
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[in] external
+ * This flow rule is created by request external to PMD.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ * @return
+ * 0 on success, negative value otherwise
+ */
+static int
+flow_create_split_inner(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ struct mlx5_flow **sub_flow,
+ uint64_t prefix_layers,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ bool external, struct rte_flow_error *error)
+{
+ struct mlx5_flow *dev_flow;
+
+ dev_flow = flow_drv_prepare(dev, flow, attr, items, actions, error);
+ if (!dev_flow)
+ return -rte_errno;
+ dev_flow->flow = flow;
+ dev_flow->external = external;
+ /* Subflow object was created, we must include one in the list. */
+ SILIST_INSERT(&flow->dev_handles, dev_flow->handle_idx,
+ dev_flow->handle, next);
+ /*
+ * If dev_flow is as one of the suffix flow, some actions in suffix
+ * flow may need some user defined item layer flags.
+ */
+ if (prefix_layers)
+ dev_flow->handle->layers = prefix_layers;
+ if (sub_flow)
+ *sub_flow = dev_flow;
+ return flow_drv_translate(dev, dev_flow, attr, items, actions, error);
+}
+
+/**
+ * Split the meter flow.
+ *
+ * As meter flow will split to three sub flow, other than meter
+ * action, the other actions make sense to only meter accepts
+ * the packet. If it need to be dropped, no other additional
+ * actions should be take.
+ *
+ * One kind of special action which decapsulates the L3 tunnel
+ * header will be in the prefix sub flow, as not to take the
+ * L3 tunnel header into account.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] items
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[out] sfx_items
+ * Suffix flow match items (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[out] actions_sfx
+ * Suffix flow actions.
+ * @param[out] actions_pre
+ * Prefix flow actions.
+ * @param[out] pattern_sfx
+ * The pattern items for the suffix flow.
+ * @param[out] tag_sfx
+ * Pointer to suffix flow tag.
+ *
+ * @return
+ * 0 on success.
+ */
+static int
+flow_meter_split_prep(struct rte_eth_dev *dev,
+ const struct rte_flow_item items[],
+ struct rte_flow_item sfx_items[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_action actions_sfx[],
+ struct rte_flow_action actions_pre[])
+{
+ struct rte_flow_action *tag_action = NULL;
+ struct rte_flow_item *tag_item;
+ struct mlx5_rte_flow_action_set_tag *set_tag;
+ struct rte_flow_error error;
+ const struct rte_flow_action_raw_encap *raw_encap;
+ const struct rte_flow_action_raw_decap *raw_decap;
+ struct mlx5_rte_flow_item_tag *tag_spec;
+ struct mlx5_rte_flow_item_tag *tag_mask;
+ uint32_t tag_id;
+ bool copy_vlan = false;
+
+ /* Prepare the actions for prefix and suffix flow. */
+ for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+ struct rte_flow_action **action_cur = NULL;
+
+ switch (actions->type) {
+ case RTE_FLOW_ACTION_TYPE_METER:
+ /* Add the extra tag action first. */
+ tag_action = actions_pre;
+ tag_action->type = MLX5_RTE_FLOW_ACTION_TYPE_TAG;
+ actions_pre++;
+ action_cur = &actions_pre;
+ break;
+ case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
+ case RTE_FLOW_ACTION_TYPE_NVGRE_DECAP:
+ action_cur = &actions_pre;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
+ raw_encap = actions->conf;
+ if (raw_encap->size < MLX5_ENCAPSULATION_DECISION_SIZE)
+ action_cur = &actions_pre;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
+ raw_decap = actions->conf;
+ if (raw_decap->size > MLX5_ENCAPSULATION_DECISION_SIZE)
+ action_cur = &actions_pre;
+ break;
+ case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
+ case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
+ copy_vlan = true;
+ break;
+ default:
+ break;
+ }
+ if (!action_cur)
+ action_cur = &actions_sfx;
+ memcpy(*action_cur, actions, sizeof(struct rte_flow_action));
+ (*action_cur)++;
+ }
+ /* Add end action to the actions. */
+ actions_sfx->type = RTE_FLOW_ACTION_TYPE_END;
+ actions_pre->type = RTE_FLOW_ACTION_TYPE_END;
+ actions_pre++;
+ /* Set the tag. */
+ set_tag = (void *)actions_pre;
+ set_tag->id = mlx5_flow_get_reg_id(dev, MLX5_MTR_SFX, 0, &error);
+ /*
+ * Get the id from the qrss_pool to make qrss share the id with meter.
+ */
+ tag_id = flow_qrss_get_id(dev);
+ set_tag->data = tag_id << MLX5_MTR_COLOR_BITS;
+ assert(tag_action);
+ tag_action->conf = set_tag;
+ /* Prepare the suffix subflow items. */
+ tag_item = sfx_items++;
+ for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
+ int item_type = items->type;
+
+ switch (item_type) {
+ case RTE_FLOW_ITEM_TYPE_PORT_ID:
+ memcpy(sfx_items, items, sizeof(*sfx_items));
+ sfx_items++;
+ break;
+ case RTE_FLOW_ITEM_TYPE_VLAN:
+ if (copy_vlan) {
+ memcpy(sfx_items, items, sizeof(*sfx_items));
+ /*
+ * Convert to internal match item, it is used
+ * for vlan push and set vid.
+ */
+ sfx_items->type = MLX5_RTE_FLOW_ITEM_TYPE_VLAN;
+ sfx_items++;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ sfx_items->type = RTE_FLOW_ITEM_TYPE_END;
+ sfx_items++;
+ tag_spec = (struct mlx5_rte_flow_item_tag *)sfx_items;
+ tag_spec->data = tag_id << MLX5_MTR_COLOR_BITS;
+ tag_spec->id = mlx5_flow_get_reg_id(dev, MLX5_MTR_SFX, 0, &error);
+ tag_mask = tag_spec + 1;
+ tag_mask->data = 0xffffff00;
+ tag_item->type = MLX5_RTE_FLOW_ITEM_TYPE_TAG;
+ tag_item->spec = tag_spec;
+ tag_item->last = NULL;
+ tag_item->mask = tag_mask;
+ return tag_id;
+}
+
+/**
+ * Split action list having QUEUE/RSS for metadata register copy.
+ *
+ * Once Q/RSS action is detected in user's action list, the flow action
+ * should be split in order to copy metadata registers, which will happen in
+ * RX_CP_TBL like,
+ * - CQE->flow_tag := reg_c[1] (MARK)
+ * - CQE->flow_table_metadata (reg_b) := reg_c[0] (META)
+ * The Q/RSS action will be performed on RX_ACT_TBL after passing by RX_CP_TBL.
+ * This is because the last action of each flow must be a terminal action
+ * (QUEUE, RSS or DROP).
+ *
+ * Flow ID must be allocated to identify actions in the RX_ACT_TBL and it is
+ * stored and kept in the mlx5_flow structure per each sub_flow.
+ *
+ * The Q/RSS action is replaced with,
+ * - SET_TAG, setting the allocated flow ID to reg_c[2].
+ * And the following JUMP action is added at the end,
+ * - JUMP, to RX_CP_TBL.
+ *
+ * A flow to perform remained Q/RSS action will be created in RX_ACT_TBL by
+ * flow_create_split_metadata() routine. The flow will look like,
+ * - If flow ID matches (reg_c[2]), perform Q/RSS.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[out] split_actions
+ * Pointer to store split actions to jump to CP_TBL.
+ * @param[in] actions
+ * Pointer to the list of original flow actions.
+ * @param[in] qrss
+ * Pointer to the Q/RSS action.
+ * @param[in] actions_n
+ * Number of original actions.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * non-zero unique flow_id on success, otherwise 0 and
+ * error/rte_error are set.
+ */
+static uint32_t
+flow_mreg_split_qrss_prep(struct rte_eth_dev *dev,
+ struct rte_flow_action *split_actions,
+ const struct rte_flow_action *actions,
+ const struct rte_flow_action *qrss,
+ int actions_n, struct rte_flow_error *error)
+{
+ struct mlx5_rte_flow_action_set_tag *set_tag;
+ struct rte_flow_action_jump *jump;
+ const int qrss_idx = qrss - actions;
+ uint32_t flow_id = 0;
+ int ret = 0;
+
+ /*
+ * Given actions will be split
+ * - Replace QUEUE/RSS action with SET_TAG to set flow ID.
+ * - Add jump to mreg CP_TBL.
+ * As a result, there will be one more action.
+ */
+ ++actions_n;
+ memcpy(split_actions, actions, sizeof(*split_actions) * actions_n);
+ set_tag = (void *)(split_actions + actions_n);
+ /*
+ * If tag action is not set to void(it means we are not the meter
+ * suffix flow), add the tag action. Since meter suffix flow already
+ * has the tag added.
+ */
+ if (split_actions[qrss_idx].type != RTE_FLOW_ACTION_TYPE_VOID) {
+ /*
+ * Allocate the new subflow ID. This one is unique within
+ * device and not shared with representors. Otherwise,
+ * we would have to resolve multi-thread access synch
+ * issue. Each flow on the shared device is appended
+ * with source vport identifier, so the resulting
+ * flows will be unique in the shared (by master and
+ * representors) domain even if they have coinciding
+ * IDs.
+ */
+ flow_id = flow_qrss_get_id(dev);
+ if (!flow_id)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "can't allocate id "
+ "for split Q/RSS subflow");
+ /* Internal SET_TAG action to set flow ID. */
+ *set_tag = (struct mlx5_rte_flow_action_set_tag){
+ .data = flow_id,
+ };
+ ret = mlx5_flow_get_reg_id(dev, MLX5_COPY_MARK, 0, error);
+ if (ret < 0)
+ return ret;
+ set_tag->id = ret;
+ /* Construct new actions array. */
+ /* Replace QUEUE/RSS action. */
+ split_actions[qrss_idx] = (struct rte_flow_action){
+ .type = MLX5_RTE_FLOW_ACTION_TYPE_TAG,
+ .conf = set_tag,
+ };
+ }
+ /* JUMP action to jump to mreg copy table (CP_TBL). */
+ jump = (void *)(set_tag + 1);
+ *jump = (struct rte_flow_action_jump){
+ .group = MLX5_FLOW_MREG_CP_TABLE_GROUP,
+ };
+ split_actions[actions_n - 2] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_JUMP,
+ .conf = jump,
+ };
+ split_actions[actions_n - 1] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_END,
+ };
+ return flow_id;
+}
+
+/**
+ * Extend the given action list for Tx metadata copy.
+ *
+ * Copy the given action list to the ext_actions and add flow metadata register
+ * copy action in order to copy reg_a set by WQE to reg_c[0].
+ *
+ * @param[out] ext_actions
+ * Pointer to the extended action list.
+ * @param[in] actions
+ * Pointer to the list of actions.
+ * @param[in] actions_n
+ * Number of actions in the list.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ * @param[in] encap_idx
+ * The encap action inndex.
+ *
+ * @return
+ * 0 on success, negative value otherwise
+ */
+static int
+flow_mreg_tx_copy_prep(struct rte_eth_dev *dev,
+ struct rte_flow_action *ext_actions,
+ const struct rte_flow_action *actions,
+ int actions_n, struct rte_flow_error *error,
+ int encap_idx)
+{
+ struct mlx5_flow_action_copy_mreg *cp_mreg =
+ (struct mlx5_flow_action_copy_mreg *)
+ (ext_actions + actions_n + 1);
+ int ret;
+
+ ret = mlx5_flow_get_reg_id(dev, MLX5_METADATA_RX, 0, error);
+ if (ret < 0)
+ return ret;
+ cp_mreg->dst = ret;
+ ret = mlx5_flow_get_reg_id(dev, MLX5_METADATA_TX, 0, error);
+ if (ret < 0)
+ return ret;
+ cp_mreg->src = ret;
+ if (encap_idx != 0)
+ memcpy(ext_actions, actions, sizeof(*ext_actions) * encap_idx);
+ if (encap_idx == actions_n - 1) {
+ ext_actions[actions_n - 1] = (struct rte_flow_action){
+ .type = MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
+ .conf = cp_mreg,
+ };
+ ext_actions[actions_n] = (struct rte_flow_action){
+ .type = RTE_FLOW_ACTION_TYPE_END,
+ };
+ } else {
+ ext_actions[encap_idx] = (struct rte_flow_action){
+ .type = MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG,
+ .conf = cp_mreg,
+ };
+ memcpy(ext_actions + encap_idx + 1, actions + encap_idx,
+ sizeof(*ext_actions) * (actions_n - encap_idx));
+ }
+ return 0;
+}
+
+/**
+ * The splitting for metadata feature.
+ *
+ * - Q/RSS action on NIC Rx should be split in order to pass by
+ * the mreg copy table (RX_CP_TBL) and then it jumps to the
+ * action table (RX_ACT_TBL) which has the split Q/RSS action.
+ *
+ * - All the actions on NIC Tx should have a mreg copy action to
+ * copy reg_a from WQE to reg_c[0].
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] flow
+ * Parent flow structure pointer.
+ * @param[in] prefix_layers
+ * Prefix flow layer flags.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] items
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[in] external
+ * This flow rule is created by request external to PMD.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ * @return
+ * 0 on success, negative value otherwise
+ */
+static int
+flow_create_split_metadata(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ uint64_t prefix_layers,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ bool external, struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_config *config = &priv->config;
+ const struct rte_flow_action *qrss = NULL;
+ struct rte_flow_action *ext_actions = NULL;
+ struct mlx5_flow *dev_flow = NULL;
+ uint32_t qrss_id = 0;
+ int mtr_sfx = 0;
+ size_t act_size;
+ int actions_n;
+ int encap_idx;
+ int ret;
+
+ /* Check whether extensive metadata feature is engaged. */
+ if (!config->dv_flow_en ||
+ config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
+ !mlx5_flow_ext_mreg_supported(dev))
+ return flow_create_split_inner(dev, flow, NULL, prefix_layers,
+ attr, items, actions, external,
+ error);
+ actions_n = flow_parse_metadata_split_actions_info(actions, &qrss,
+ &encap_idx);
+ if (qrss) {
+ /* Exclude hairpin flows from splitting. */
+ if (qrss->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
+ const struct rte_flow_action_queue *queue;
+
+ queue = qrss->conf;
+ if (mlx5_rxq_get_type(dev, queue->index) ==
+ MLX5_RXQ_TYPE_HAIRPIN)
+ qrss = NULL;
+ } else if (qrss->type == RTE_FLOW_ACTION_TYPE_RSS) {
+ const struct rte_flow_action_rss *rss;
+
+ rss = qrss->conf;
+ if (mlx5_rxq_get_type(dev, rss->queue[0]) ==
+ MLX5_RXQ_TYPE_HAIRPIN)
+ qrss = NULL;
+ }
+ }
+ if (qrss) {
+ /* Check if it is in meter suffix table. */
+ mtr_sfx = attr->group == (attr->transfer ?
+ (MLX5_FLOW_TABLE_LEVEL_SUFFIX - 1) :
+ MLX5_FLOW_TABLE_LEVEL_SUFFIX);
+ /*
+ * Q/RSS action on NIC Rx should be split in order to pass by
+ * the mreg copy table (RX_CP_TBL) and then it jumps to the
+ * action table (RX_ACT_TBL) which has the split Q/RSS action.
+ */
+ act_size = sizeof(struct rte_flow_action) * (actions_n + 1) +
+ sizeof(struct rte_flow_action_set_tag) +
+ sizeof(struct rte_flow_action_jump);
+ ext_actions = rte_zmalloc(__func__, act_size, 0);
+ if (!ext_actions)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "no memory to split "
+ "metadata flow");
+ /*
+ * If we are the suffix flow of meter, tag already exist.
+ * Set the tag action to void.
+ */
+ if (mtr_sfx)
+ ext_actions[qrss - actions].type =
+ RTE_FLOW_ACTION_TYPE_VOID;
+ else
+ ext_actions[qrss - actions].type =
+ MLX5_RTE_FLOW_ACTION_TYPE_TAG;
+ /*
+ * Create the new actions list with removed Q/RSS action
+ * and appended set tag and jump to register copy table
+ * (RX_CP_TBL). We should preallocate unique tag ID here
+ * in advance, because it is needed for set tag action.
+ */
+ qrss_id = flow_mreg_split_qrss_prep(dev, ext_actions, actions,
+ qrss, actions_n, error);
+ if (!mtr_sfx && !qrss_id) {
+ ret = -rte_errno;
+ goto exit;
+ }
+ } else if (attr->egress && !attr->transfer) {
+ /*
+ * All the actions on NIC Tx should have a metadata register
+ * copy action to copy reg_a from WQE to reg_c[meta]
+ */
+ act_size = sizeof(struct rte_flow_action) * (actions_n + 1) +
+ sizeof(struct mlx5_flow_action_copy_mreg);
+ ext_actions = rte_zmalloc(__func__, act_size, 0);
+ if (!ext_actions)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "no memory to split "
+ "metadata flow");
+ /* Create the action list appended with copy register. */
+ ret = flow_mreg_tx_copy_prep(dev, ext_actions, actions,
+ actions_n, error, encap_idx);
+ if (ret < 0)
+ goto exit;
+ }
+ /* Add the unmodified original or prefix subflow. */
+ ret = flow_create_split_inner(dev, flow, &dev_flow, prefix_layers, attr,
+ items, ext_actions ? ext_actions :
+ actions, external, error);
+ if (ret < 0)
+ goto exit;
+ MLX5_ASSERT(dev_flow);
+ if (qrss) {
+ const struct rte_flow_attr q_attr = {
+ .group = MLX5_FLOW_MREG_ACT_TABLE_GROUP,
+ .ingress = 1,
+ };
+ /* Internal PMD action to set register. */
+ struct mlx5_rte_flow_item_tag q_tag_spec = {
+ .data = qrss_id,
+ .id = 0,
+ };
+ struct rte_flow_item q_items[] = {
+ {
+ .type = MLX5_RTE_FLOW_ITEM_TYPE_TAG,
+ .spec = &q_tag_spec,
+ .last = NULL,
+ .mask = NULL,
+ },
+ {
+ .type = RTE_FLOW_ITEM_TYPE_END,
+ },
+ };
+ struct rte_flow_action q_actions[] = {
+ {
+ .type = qrss->type,
+ .conf = qrss->conf,
+ },
+ {
+ .type = RTE_FLOW_ACTION_TYPE_END,
+ },
+ };
+ uint64_t layers = flow_get_prefix_layer_flags(dev_flow);
+
+ /*
+ * Configure the tag item only if there is no meter subflow.
+ * Since tag is already marked in the meter suffix subflow
+ * we can just use the meter suffix items as is.
+ */
+ if (qrss_id) {
+ /* Not meter subflow. */
+ MLX5_ASSERT(!mtr_sfx);
+ /*
+ * Put unique id in prefix flow due to it is destroyed
+ * after suffix flow and id will be freed after there
+ * is no actual flows with this id and identifier
+ * reallocation becomes possible (for example, for
+ * other flows in other threads).
+ */
+ dev_flow->handle->split_flow_id = qrss_id;
+ ret = mlx5_flow_get_reg_id(dev, MLX5_COPY_MARK, 0,
+ error);
+ if (ret < 0)
+ goto exit;
+ q_tag_spec.id = ret;
+ }
+ dev_flow = NULL;
+ /* Add suffix subflow to execute Q/RSS. */
+ ret = flow_create_split_inner(dev, flow, &dev_flow, layers,
+ &q_attr, mtr_sfx ? items :
+ q_items, q_actions,
+ external, error);
+ if (ret < 0)
+ goto exit;
+ /* qrss ID should be freed if failed. */
+ qrss_id = 0;
+ MLX5_ASSERT(dev_flow);
+ }
+
+exit:
+ /*
+ * We do not destroy the partially created sub_flows in case of error.
+ * These ones are included into parent flow list and will be destroyed
+ * by flow_drv_destroy.
+ */
+ flow_qrss_free_id(dev, qrss_id);
+ rte_free(ext_actions);
+ return ret;
+}
+
+/**
+ * The splitting for meter feature.
+ *
+ * - The meter flow will be split to two flows as prefix and
+ * suffix flow. The packets make sense only it pass the prefix
+ * meter action.
+ *
+ * - Reg_C_5 is used for the packet to match betweend prefix and
+ * suffix flow.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] flow
+ * Parent flow structure pointer.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] items
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[in] external
+ * This flow rule is created by request external to PMD.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ * @return
+ * 0 on success, negative value otherwise
+ */
+static int
+flow_create_split_meter(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ bool external, struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct rte_flow_action *sfx_actions = NULL;
+ struct rte_flow_action *pre_actions = NULL;
+ struct rte_flow_item *sfx_items = NULL;
+ struct mlx5_flow *dev_flow = NULL;
+ struct rte_flow_attr sfx_attr = *attr;
+ uint32_t mtr = 0;
+ uint32_t mtr_tag_id = 0;
+ size_t act_size;
+ size_t item_size;
+ int actions_n = 0;
+ int ret;
+
+ if (priv->mtr_en)
+ actions_n = flow_check_meter_action(actions, &mtr);
+ if (mtr) {
+ /* The five prefix actions: meter, decap, encap, tag, end. */
+ act_size = sizeof(struct rte_flow_action) * (actions_n + 5) +
+ sizeof(struct mlx5_rte_flow_action_set_tag);
+ /* tag, vlan, port id, end. */
+#define METER_SUFFIX_ITEM 4
+ item_size = sizeof(struct rte_flow_item) * METER_SUFFIX_ITEM +
+ sizeof(struct mlx5_rte_flow_item_tag) * 2;
+ sfx_actions = rte_zmalloc(__func__, (act_size + item_size), 0);
+ if (!sfx_actions)
+ return rte_flow_error_set(error, ENOMEM,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "no memory to split "
+ "meter flow");
+ sfx_items = (struct rte_flow_item *)((char *)sfx_actions +
+ act_size);
+ pre_actions = sfx_actions + actions_n;
+ mtr_tag_id = flow_meter_split_prep(dev, items, sfx_items,
+ actions, sfx_actions,
+ pre_actions);
+ if (!mtr_tag_id) {
+ ret = -rte_errno;
+ goto exit;
+ }
+ /* Add the prefix subflow. */
+ ret = flow_create_split_inner(dev, flow, &dev_flow, 0, attr,
+ items, pre_actions, external,
+ error);
+ if (ret) {
+ ret = -rte_errno;
+ goto exit;
+ }
+ dev_flow->handle->split_flow_id = mtr_tag_id;
+ /* Setting the sfx group atrr. */
+ sfx_attr.group = sfx_attr.transfer ?
+ (MLX5_FLOW_TABLE_LEVEL_SUFFIX - 1) :
+ MLX5_FLOW_TABLE_LEVEL_SUFFIX;
+ }
+ /* Add the prefix subflow. */
+ ret = flow_create_split_metadata(dev, flow, dev_flow ?
+ flow_get_prefix_layer_flags(dev_flow) :
+ 0, &sfx_attr,
+ sfx_items ? sfx_items : items,
+ sfx_actions ? sfx_actions : actions,
+ external, error);
+exit:
+ if (sfx_actions)
+ rte_free(sfx_actions);
+ return ret;
+}
+
+/**
+ * Split the flow to subflow set. The splitters might be linked
+ * in the chain, like this:
+ * flow_create_split_outer() calls:
+ * flow_create_split_meter() calls:
+ * flow_create_split_metadata(meter_subflow_0) calls:
+ * flow_create_split_inner(metadata_subflow_0)
+ * flow_create_split_inner(metadata_subflow_1)
+ * flow_create_split_inner(metadata_subflow_2)
+ * flow_create_split_metadata(meter_subflow_1) calls:
+ * flow_create_split_inner(metadata_subflow_0)
+ * flow_create_split_inner(metadata_subflow_1)
+ * flow_create_split_inner(metadata_subflow_2)
+ *
+ * This provide flexible way to add new levels of flow splitting.
+ * The all of successfully created subflows are included to the
+ * parent flow dev_flow list.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] flow
+ * Parent flow structure pointer.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] items
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[in] external
+ * This flow rule is created by request external to PMD.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ * @return
+ * 0 on success, negative value otherwise
+ */
+static int
+flow_create_split_outer(struct rte_eth_dev *dev,
+ struct rte_flow *flow,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ bool external, struct rte_flow_error *error)
+{
+ int ret;
+
+ ret = flow_create_split_meter(dev, flow, attr, items,
+ actions, external, error);
+ MLX5_ASSERT(ret <= 0);
+ return ret;
+}
+
+/**
+ * Create a flow and add it to @p list.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param list
+ * Pointer to a TAILQ flow list. If this parameter NULL,
+ * no list insertion occurred, flow is just created,
+ * this is caller's responsibility to track the
+ * created flow.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] items
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ * @param[in] external
+ * This flow rule is created by request external to PMD.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * A flow index on success, 0 otherwise and rte_errno is set.
+ */
+static uint32_t
+flow_list_create(struct rte_eth_dev *dev, uint32_t *list,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item items[],
+ const struct rte_flow_action actions[],
+ bool external, struct rte_flow_error *error)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct rte_flow *flow = NULL;
+ struct mlx5_flow *dev_flow;
+ const struct rte_flow_action_rss *rss;
+ union {
+ struct rte_flow_expand_rss buf;
+ uint8_t buffer[2048];
+ } expand_buffer;
+ union {
+ struct rte_flow_action actions[MLX5_MAX_SPLIT_ACTIONS];
+ uint8_t buffer[2048];
+ } actions_rx;
+ union {
+ struct rte_flow_action actions[MLX5_MAX_SPLIT_ACTIONS];
+ uint8_t buffer[2048];
+ } actions_hairpin_tx;
+ union {
+ struct rte_flow_item items[MLX5_MAX_SPLIT_ITEMS];
+ uint8_t buffer[2048];
+ } items_tx;
+ struct rte_flow_expand_rss *buf = &expand_buffer.buf;
+ struct mlx5_flow_rss_desc *rss_desc = &((struct mlx5_flow_rss_desc *)
+ priv->rss_desc)[!!priv->flow_idx];
+ const struct rte_flow_action *p_actions_rx = actions;
+ uint32_t i;
+ uint32_t idx = 0;
+ int hairpin_flow;
+ uint32_t hairpin_id = 0;
+ struct rte_flow_attr attr_tx = { .priority = 0 };
+ int ret;
+
+ hairpin_flow = flow_check_hairpin_split(dev, attr, actions);
+ ret = flow_drv_validate(dev, attr, items, p_actions_rx,
+ external, hairpin_flow, error);
+ if (ret < 0)
+ return 0;
+ if (hairpin_flow > 0) {
+ if (hairpin_flow > MLX5_MAX_SPLIT_ACTIONS) {
+ rte_errno = EINVAL;
+ return 0;
+ }
+ flow_hairpin_split(dev, actions, actions_rx.actions,
+ actions_hairpin_tx.actions, items_tx.items,
+ &hairpin_id);
+ p_actions_rx = actions_rx.actions;
+ }
+ flow = mlx5_ipool_zmalloc(priv->sh->ipool[MLX5_IPOOL_RTE_FLOW], &idx);
+ if (!flow) {
+ rte_errno = ENOMEM;
+ goto error_before_flow;
+ }
+ flow->drv_type = flow_get_drv_type(dev, attr);
+ if (hairpin_id != 0)
+ flow->hairpin_flow_id = hairpin_id;
+ MLX5_ASSERT(flow->drv_type > MLX5_FLOW_TYPE_MIN &&
+ flow->drv_type < MLX5_FLOW_TYPE_MAX);
+ memset(rss_desc, 0, sizeof(*rss_desc));
+ rss = flow_get_rss_action(p_actions_rx);
+ if (rss) {
+ /*
+ * The following information is required by
+ * mlx5_flow_hashfields_adjust() in advance.
+ */
+ rss_desc->level = rss->level;
+ /* RSS type 0 indicates default RSS type (ETH_RSS_IP). */
+ rss_desc->types = !rss->types ? ETH_RSS_IP : rss->types;
+ }
+ flow->dev_handles = 0;
+ if (rss && rss->types) {
+ unsigned int graph_root;