+ struct qede_dev *qdev = QEDE_INIT_QDEV(eth_dev);
+ struct ecore_dev *edev = QEDE_INIT_EDEV(qdev);
+ struct ecore_sp_vport_update_params params;
+ struct ecore_hwfn *p_hwfn;
+ uint8_t i;
+ int rc = -1;
+
+ memset(¶ms, 0, sizeof(struct ecore_sp_vport_update_params));
+ params.vport_id = 0;
+ params.update_vport_active_rx_flg = 1;
+ params.update_vport_active_tx_flg = 1;
+ params.vport_active_rx_flg = flg;
+ params.vport_active_tx_flg = flg;
+ if (~qdev->enable_tx_switching & flg) {
+ params.update_tx_switching_flg = 1;
+ params.tx_switching_flg = !flg;
+ }
+ for_each_hwfn(edev, i) {
+ p_hwfn = &edev->hwfns[i];
+ params.opaque_fid = p_hwfn->hw_info.opaque_fid;
+ rc = ecore_sp_vport_update(p_hwfn, ¶ms,
+ ECORE_SPQ_MODE_EBLOCK, NULL);
+ if (rc != ECORE_SUCCESS) {
+ DP_ERR(edev, "Failed to update vport\n");
+ break;
+ }
+ }
+ DP_INFO(edev, "vport is %s\n", flg ? "activated" : "deactivated");
+
+ return rc;
+}
+
+static void
+qede_update_sge_tpa_params(struct ecore_sge_tpa_params *sge_tpa_params,
+ uint16_t mtu, bool enable)
+{
+ /* Enable LRO in split mode */
+ sge_tpa_params->tpa_ipv4_en_flg = enable;
+ sge_tpa_params->tpa_ipv6_en_flg = enable;
+ sge_tpa_params->tpa_ipv4_tunn_en_flg = enable;
+ sge_tpa_params->tpa_ipv6_tunn_en_flg = enable;
+ /* set if tpa enable changes */
+ sge_tpa_params->update_tpa_en_flg = 1;
+ /* set if tpa parameters should be handled */
+ sge_tpa_params->update_tpa_param_flg = enable;
+
+ sge_tpa_params->max_buffers_per_cqe = 20;
+ /* Enable TPA in split mode. In this mode each TPA segment
+ * starts on the new BD, so there is one BD per segment.
+ */
+ sge_tpa_params->tpa_pkt_split_flg = 1;
+ sge_tpa_params->tpa_hdr_data_split_flg = 0;
+ sge_tpa_params->tpa_gro_consistent_flg = 0;
+ sge_tpa_params->tpa_max_aggs_num = ETH_TPA_MAX_AGGS_NUM;
+ sge_tpa_params->tpa_max_size = 0x7FFF;
+ sge_tpa_params->tpa_min_size_to_start = mtu / 2;
+ sge_tpa_params->tpa_min_size_to_cont = mtu / 2;
+}
+
+/* Enable/disable LRO via vport-update */
+int qede_enable_tpa(struct rte_eth_dev *eth_dev, bool flg)
+{
+ struct qede_dev *qdev = QEDE_INIT_QDEV(eth_dev);
+ struct ecore_dev *edev = QEDE_INIT_EDEV(qdev);
+ struct ecore_sp_vport_update_params params;
+ struct ecore_sge_tpa_params tpa_params;
+ struct ecore_hwfn *p_hwfn;
+ int rc;
+ int i;
+
+ memset(¶ms, 0, sizeof(struct ecore_sp_vport_update_params));
+ memset(&tpa_params, 0, sizeof(struct ecore_sge_tpa_params));
+ qede_update_sge_tpa_params(&tpa_params, qdev->mtu, flg);
+ params.vport_id = 0;
+ params.sge_tpa_params = &tpa_params;
+ for_each_hwfn(edev, i) {
+ p_hwfn = &edev->hwfns[i];
+ params.opaque_fid = p_hwfn->hw_info.opaque_fid;
+ rc = ecore_sp_vport_update(p_hwfn, ¶ms,
+ ECORE_SPQ_MODE_EBLOCK, NULL);
+ if (rc != ECORE_SUCCESS) {
+ DP_ERR(edev, "Failed to update LRO\n");
+ return -1;
+ }
+ }
+ qdev->enable_lro = flg;
+ eth_dev->data->lro = flg;
+
+ DP_INFO(edev, "LRO is %s\n", flg ? "enabled" : "disabled");
+
+ return 0;