- }
- }
-
- if (likely(!vdev->remove)) {
- /* Handle guest TX*/
- tx_count = rte_vhost_dequeue_burst(dev, VIRTIO_TXQ, mbuf_pool, pkts_burst, MAX_PKT_BURST);
- /* If this is the first received packet we need to learn the MAC and setup VMDQ */
- if (unlikely(vdev->ready == DEVICE_MAC_LEARNING) && tx_count) {
- if (vdev->remove || (link_vmdq(vdev, pkts_burst[0]) == -1)) {
- while (tx_count)
- rte_pktmbuf_free(pkts_burst[--tx_count]);
- }
- }
- while (tx_count)
- virtio_tx_route(vdev, pkts_burst[--tx_count], (uint16_t)dev->device_fh);
- }
-
- /*move to the next device in the list*/
- dev_ll = dev_ll->next;
- }
- }
-
- return 0;
-}
-
-/*
- * This function gets available ring number for zero copy rx.
- * Only one thread will call this funciton for a paticular virtio device,
- * so, it is designed as non-thread-safe function.
- */
-static inline uint32_t __attribute__((always_inline))
-get_available_ring_num_zcp(struct virtio_net *dev)
-{
- struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ];
- uint16_t avail_idx;
-
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
- return (uint32_t)(avail_idx - vq->last_used_idx_res);
-}
-
-/*
- * This function gets available ring index for zero copy rx,
- * it will retry 'burst_rx_retry_num' times till it get enough ring index.
- * Only one thread will call this funciton for a paticular virtio device,
- * so, it is designed as non-thread-safe function.
- */
-static inline uint32_t __attribute__((always_inline))
-get_available_ring_index_zcp(struct virtio_net *dev,
- uint16_t *res_base_idx, uint32_t count)
-{
- struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ];
- uint16_t avail_idx;
- uint32_t retry = 0;
- uint16_t free_entries;
-
- *res_base_idx = vq->last_used_idx_res;
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
- free_entries = (avail_idx - *res_base_idx);
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") in get_available_ring_index_zcp: "
- "avail idx: %d, "
- "res base idx:%d, free entries:%d\n",
- dev->device_fh, avail_idx, *res_base_idx,
- free_entries);
-
- /*
- * If retry is enabled and the queue is full then we wait
- * and retry to avoid packet loss.
- */
- if (enable_retry && unlikely(count > free_entries)) {
- for (retry = 0; retry < burst_rx_retry_num; retry++) {
- rte_delay_us(burst_rx_delay_time);
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
- free_entries = (avail_idx - *res_base_idx);
- if (count <= free_entries)
- break;
- }
- }
-
- /*check that we have enough buffers*/
- if (unlikely(count > free_entries))
- count = free_entries;
-
- if (unlikely(count == 0)) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") Fail in get_available_ring_index_zcp: "
- "avail idx: %d, res base idx:%d, free entries:%d\n",
- dev->device_fh, avail_idx,
- *res_base_idx, free_entries);
- return 0;
- }
-
- vq->last_used_idx_res = *res_base_idx + count;
-
- return count;
-}
-
-/*
- * This function put descriptor back to used list.
- */
-static inline void __attribute__((always_inline))
-put_desc_to_used_list_zcp(struct vhost_virtqueue *vq, uint16_t desc_idx)
-{
- uint16_t res_cur_idx = vq->last_used_idx;
- vq->used->ring[res_cur_idx & (vq->size - 1)].id = (uint32_t)desc_idx;
- vq->used->ring[res_cur_idx & (vq->size - 1)].len = 0;
- rte_compiler_barrier();
- *(volatile uint16_t *)&vq->used->idx += 1;
- vq->last_used_idx += 1;
-
- /* Kick the guest if necessary. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write(vq->callfd, (eventfd_t)1);
-}
-
-/*
- * This function get available descriptor from vitio vring and un-attached mbuf
- * from vpool->ring, and then attach them together. It needs adjust the offset
- * for buff_addr and phys_addr accroding to PMD implementation, otherwise the
- * frame data may be put to wrong location in mbuf.
- */
-static inline void __attribute__((always_inline))
-attach_rxmbuf_zcp(struct virtio_net *dev)
-{
- uint16_t res_base_idx, desc_idx;
- uint64_t buff_addr, phys_addr;
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- void *obj = NULL;
- struct rte_mbuf *mbuf;
- struct vpool *vpool;
- hpa_type addr_type;
- struct vhost_dev *vdev = (struct vhost_dev *)dev->priv;
-
- vpool = &vpool_array[vdev->vmdq_rx_q];
- vq = dev->virtqueue[VIRTIO_RXQ];
-
- do {
- if (unlikely(get_available_ring_index_zcp(vdev->dev, &res_base_idx,
- 1) != 1))
- return;
- desc_idx = vq->avail->ring[(res_base_idx) & (vq->size - 1)];
-
- desc = &vq->desc[desc_idx];
- if (desc->flags & VRING_DESC_F_NEXT) {
- desc = &vq->desc[desc->next];
- buff_addr = gpa_to_vva(dev, desc->addr);
- phys_addr = gpa_to_hpa(vdev, desc->addr, desc->len,
- &addr_type);
- } else {
- buff_addr = gpa_to_vva(dev,
- desc->addr + vq->vhost_hlen);
- phys_addr = gpa_to_hpa(vdev,
- desc->addr + vq->vhost_hlen,
- desc->len, &addr_type);
- }
-
- if (unlikely(addr_type == PHYS_ADDR_INVALID)) {
- RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Invalid frame buffer"
- " address found when attaching RX frame buffer"
- " address!\n", dev->device_fh);
- put_desc_to_used_list_zcp(vq, desc_idx);
- continue;
- }
-
- /*
- * Check if the frame buffer address from guest crosses
- * sub-region or not.
- */
- if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) {
- RTE_LOG(ERR, VHOST_DATA,
- "(%"PRIu64") Frame buffer address cross "
- "sub-regioin found when attaching RX frame "
- "buffer address!\n",
- dev->device_fh);
- put_desc_to_used_list_zcp(vq, desc_idx);
- continue;
- }
- } while (unlikely(phys_addr == 0));
-
- rte_ring_sc_dequeue(vpool->ring, &obj);
- mbuf = obj;
- if (unlikely(mbuf == NULL)) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in attach_rxmbuf_zcp: "
- "ring_sc_dequeue fail.\n",
- dev->device_fh);
- put_desc_to_used_list_zcp(vq, desc_idx);
- return;
- }
-
- if (unlikely(vpool->buf_size > desc->len)) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in attach_rxmbuf_zcp: frame buffer "
- "length(%d) of descriptor idx: %d less than room "
- "size required: %d\n",
- dev->device_fh, desc->len, desc_idx, vpool->buf_size);
- put_desc_to_used_list_zcp(vq, desc_idx);
- rte_ring_sp_enqueue(vpool->ring, obj);
- return;
- }
-
- mbuf->buf_addr = (void *)(uintptr_t)(buff_addr - RTE_PKTMBUF_HEADROOM);
- mbuf->data_off = RTE_PKTMBUF_HEADROOM;
- mbuf->buf_physaddr = phys_addr - RTE_PKTMBUF_HEADROOM;
- mbuf->data_len = desc->len;
- MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx;
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in attach_rxmbuf_zcp: res base idx:%d, "
- "descriptor idx:%d\n",
- dev->device_fh, res_base_idx, desc_idx);
-
- __rte_mbuf_raw_free(mbuf);
-
- return;
-}
-
-/*
- * Detach an attched packet mbuf -
- * - restore original mbuf address and length values.
- * - reset pktmbuf data and data_len to their default values.
- * All other fields of the given packet mbuf will be left intact.
- *
- * @param m
- * The attached packet mbuf.
- */
-static inline void pktmbuf_detach_zcp(struct rte_mbuf *m)
-{
- const struct rte_mempool *mp = m->pool;
- void *buf = rte_mbuf_to_baddr(m);
- uint32_t buf_ofs;
- uint32_t buf_len = mp->elt_size - sizeof(*m);
- m->buf_physaddr = rte_mempool_virt2phy(mp, m) + sizeof(*m);
-
- m->buf_addr = buf;
- m->buf_len = (uint16_t)buf_len;
-
- buf_ofs = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
- RTE_PKTMBUF_HEADROOM : m->buf_len;
- m->data_off = buf_ofs;
-
- m->data_len = 0;
-}
-
-/*
- * This function is called after packets have been transimited. It fetchs mbuf
- * from vpool->pool, detached it and put into vpool->ring. It also update the
- * used index and kick the guest if necessary.
- */
-static inline uint32_t __attribute__((always_inline))
-txmbuf_clean_zcp(struct virtio_net *dev, struct vpool *vpool)
-{
- struct rte_mbuf *mbuf;
- struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ];
- uint32_t used_idx = vq->last_used_idx & (vq->size - 1);
- uint32_t index = 0;
- uint32_t mbuf_count = rte_mempool_count(vpool->pool);
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool before "
- "clean is: %d\n",
- dev->device_fh, mbuf_count);
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring before "
- "clean is : %d\n",
- dev->device_fh, rte_ring_count(vpool->ring));
-
- for (index = 0; index < mbuf_count; index++) {
- mbuf = __rte_mbuf_raw_alloc(vpool->pool);
- if (likely(MBUF_EXT_MEM(mbuf)))
- pktmbuf_detach_zcp(mbuf);
- rte_ring_sp_enqueue(vpool->ring, mbuf);
-
- /* Update used index buffer information. */
- vq->used->ring[used_idx].id = MBUF_HEADROOM_UINT32(mbuf);
- vq->used->ring[used_idx].len = 0;
-
- used_idx = (used_idx + 1) & (vq->size - 1);
- }
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool after "
- "clean is: %d\n",
- dev->device_fh, rte_mempool_count(vpool->pool));
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring after "
- "clean is : %d\n",
- dev->device_fh, rte_ring_count(vpool->ring));
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: before updated "
- "vq->last_used_idx:%d\n",
- dev->device_fh, vq->last_used_idx);
-
- vq->last_used_idx += mbuf_count;
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: after updated "
- "vq->last_used_idx:%d\n",
- dev->device_fh, vq->last_used_idx);
-
- rte_compiler_barrier();
-
- *(volatile uint16_t *)&vq->used->idx += mbuf_count;
-
- /* Kick guest if required. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write(vq->callfd, (eventfd_t)1);
-
- return 0;
-}
-
-/*
- * This function is called when a virtio device is destroy.
- * It fetchs mbuf from vpool->pool, and detached it, and put into vpool->ring.
- */
-static void mbuf_destroy_zcp(struct vpool *vpool)
-{
- struct rte_mbuf *mbuf = NULL;
- uint32_t index, mbuf_count = rte_mempool_count(vpool->pool);
-
- LOG_DEBUG(VHOST_CONFIG,
- "in mbuf_destroy_zcp: mbuf count in mempool before "
- "mbuf_destroy_zcp is: %d\n",
- mbuf_count);
- LOG_DEBUG(VHOST_CONFIG,
- "in mbuf_destroy_zcp: mbuf count in ring before "
- "mbuf_destroy_zcp is : %d\n",
- rte_ring_count(vpool->ring));
-
- for (index = 0; index < mbuf_count; index++) {
- mbuf = __rte_mbuf_raw_alloc(vpool->pool);
- if (likely(mbuf != NULL)) {
- if (likely(MBUF_EXT_MEM(mbuf)))
- pktmbuf_detach_zcp(mbuf);
- rte_ring_sp_enqueue(vpool->ring, (void *)mbuf);
- }
- }
-
- LOG_DEBUG(VHOST_CONFIG,
- "in mbuf_destroy_zcp: mbuf count in mempool after "
- "mbuf_destroy_zcp is: %d\n",
- rte_mempool_count(vpool->pool));
- LOG_DEBUG(VHOST_CONFIG,
- "in mbuf_destroy_zcp: mbuf count in ring after "
- "mbuf_destroy_zcp is : %d\n",
- rte_ring_count(vpool->ring));
-}
-
-/*
- * This function update the use flag and counter.
- */
-static inline uint32_t __attribute__((always_inline))
-virtio_dev_rx_zcp(struct virtio_net *dev, struct rte_mbuf **pkts,
- uint32_t count)
-{
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- struct rte_mbuf *buff;
- /* The virtio_hdr is initialised to 0. */
- struct virtio_net_hdr_mrg_rxbuf virtio_hdr
- = {{0, 0, 0, 0, 0, 0}, 0};
- uint64_t buff_hdr_addr = 0;
- uint32_t head[MAX_PKT_BURST], packet_len = 0;
- uint32_t head_idx, packet_success = 0;
- uint16_t res_cur_idx;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
-
- if (count == 0)
- return 0;
-
- vq = dev->virtqueue[VIRTIO_RXQ];
- count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
-
- res_cur_idx = vq->last_used_idx;
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n",
- dev->device_fh, res_cur_idx, res_cur_idx + count);
-
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (head_idx = 0; head_idx < count; head_idx++)
- head[head_idx] = MBUF_HEADROOM_UINT32(pkts[head_idx]);
-
- /*Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
-
- while (packet_success != count) {
- /* Get descriptor from available ring */
- desc = &vq->desc[head[packet_success]];
-
- buff = pkts[packet_success];
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in dev_rx_zcp: update the used idx for "
- "pkt[%d] descriptor idx: %d\n",
- dev->device_fh, packet_success,
- MBUF_HEADROOM_UINT32(buff));
-
- PRINT_PACKET(dev,
- (uintptr_t)(((uint64_t)(uintptr_t)buff->buf_addr)
- + RTE_PKTMBUF_HEADROOM),
- rte_pktmbuf_data_len(buff), 0);
-
- /* Buffer address translation for virtio header. */
- buff_hdr_addr = gpa_to_vva(dev, desc->addr);
- packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen;
-
- /*
- * If the descriptors are chained the header and data are
- * placed in separate buffers.
- */
- if (desc->flags & VRING_DESC_F_NEXT) {
- desc->len = vq->vhost_hlen;
- desc = &vq->desc[desc->next];
- desc->len = rte_pktmbuf_data_len(buff);
- } else {
- desc->len = packet_len;
- }
-
- /* Update used ring with desc information */
- vq->used->ring[res_cur_idx & (vq->size - 1)].id
- = head[packet_success];
- vq->used->ring[res_cur_idx & (vq->size - 1)].len
- = packet_len;
- res_cur_idx++;
- packet_success++;
-
- /* A header is required per buffer. */
- rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
- (const void *)&virtio_hdr, vq->vhost_hlen);
-
- PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1);
-
- if (likely(packet_success < count)) {
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
- }
- }
-
- rte_compiler_barrier();
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in dev_rx_zcp: before update used idx: "
- "vq.last_used_idx: %d, vq->used->idx: %d\n",
- dev->device_fh, vq->last_used_idx, vq->used->idx);
-
- *(volatile uint16_t *)&vq->used->idx += count;
- vq->last_used_idx += count;
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in dev_rx_zcp: after update used idx: "
- "vq.last_used_idx: %d, vq->used->idx: %d\n",
- dev->device_fh, vq->last_used_idx, vq->used->idx);
-
- /* Kick the guest if necessary. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write(vq->callfd, (eventfd_t)1);
-
- return count;
-}
-
-/*
- * This function routes the TX packet to the correct interface.
- * This may be a local device or the physical port.
- */
-static inline void __attribute__((always_inline))
-virtio_tx_route_zcp(struct virtio_net *dev, struct rte_mbuf *m,
- uint32_t desc_idx, uint8_t need_copy)
-{
- struct mbuf_table *tx_q;
- struct rte_mbuf **m_table;
- void *obj = NULL;
- struct rte_mbuf *mbuf;
- unsigned len, ret, offset = 0;
- struct vpool *vpool;
- uint16_t vlan_tag = (uint16_t)vlan_tags[(uint16_t)dev->device_fh];
- uint16_t vmdq_rx_q = ((struct vhost_dev *)dev->priv)->vmdq_rx_q;
-
- /*Add packet to the port tx queue*/
- tx_q = &tx_queue_zcp[vmdq_rx_q];
- len = tx_q->len;
-
- /* Allocate an mbuf and populate the structure. */
- vpool = &vpool_array[MAX_QUEUES + vmdq_rx_q];
- rte_ring_sc_dequeue(vpool->ring, &obj);
- mbuf = obj;
- if (unlikely(mbuf == NULL)) {
- struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ];
- RTE_LOG(ERR, VHOST_DATA,
- "(%"PRIu64") Failed to allocate memory for mbuf.\n",
- dev->device_fh);
- put_desc_to_used_list_zcp(vq, desc_idx);
- return;
- }
-
- if (vm2vm_mode == VM2VM_HARDWARE) {
- /* Avoid using a vlan tag from any vm for external pkt, such as
- * vlan_tags[dev->device_fh], oterwise, it conflicts when pool
- * selection, MAC address determines it as an external pkt
- * which should go to network, while vlan tag determine it as
- * a vm2vm pkt should forward to another vm. Hardware confuse
- * such a ambiguous situation, so pkt will lost.
- */
- vlan_tag = external_pkt_default_vlan_tag;
- if (find_local_dest(dev, m, &offset, &vlan_tag) != 0) {
- MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx;
- __rte_mbuf_raw_free(mbuf);
- return;
- }
- }
-
- mbuf->nb_segs = m->nb_segs;
- mbuf->next = m->next;
- mbuf->data_len = m->data_len + offset;
- mbuf->pkt_len = mbuf->data_len;
- if (unlikely(need_copy)) {
- /* Copy the packet contents to the mbuf. */
- rte_memcpy(rte_pktmbuf_mtod(mbuf, void *),
- rte_pktmbuf_mtod(m, void *),
- m->data_len);
- } else {
- mbuf->data_off = m->data_off;
- mbuf->buf_physaddr = m->buf_physaddr;
- mbuf->buf_addr = m->buf_addr;
- }
- mbuf->ol_flags = PKT_TX_VLAN_PKT;
- mbuf->vlan_tci = vlan_tag;
- mbuf->l2_len = sizeof(struct ether_hdr);
- mbuf->l3_len = sizeof(struct ipv4_hdr);
- MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx;
-
- tx_q->m_table[len] = mbuf;
- len++;
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in tx_route_zcp: pkt: nb_seg: %d, next:%s\n",
- dev->device_fh,
- mbuf->nb_segs,
- (mbuf->next == NULL) ? "null" : "non-null");
-
- if (enable_stats) {
- dev_statistics[dev->device_fh].tx_total++;
- dev_statistics[dev->device_fh].tx++;
- }
-
- if (unlikely(len == MAX_PKT_BURST)) {
- m_table = (struct rte_mbuf **)tx_q->m_table;
- ret = rte_eth_tx_burst(ports[0],
- (uint16_t)tx_q->txq_id, m_table, (uint16_t) len);
-
- /*
- * Free any buffers not handled by TX and update
- * the port stats.
- */
- if (unlikely(ret < len)) {
- do {
- rte_pktmbuf_free(m_table[ret]);
- } while (++ret < len);
- }
-
- len = 0;
- txmbuf_clean_zcp(dev, vpool);
- }
-
- tx_q->len = len;
-
- return;
-}
-
-/*
- * This function TX all available packets in virtio TX queue for one
- * virtio-net device. If it is first packet, it learns MAC address and
- * setup VMDQ.
- */
-static inline void __attribute__((always_inline))
-virtio_dev_tx_zcp(struct virtio_net *dev)
-{
- struct rte_mbuf m;
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- uint64_t buff_addr = 0, phys_addr;
- uint32_t head[MAX_PKT_BURST];
- uint32_t i;
- uint16_t free_entries, packet_success = 0;
- uint16_t avail_idx;
- uint8_t need_copy = 0;
- hpa_type addr_type;
- struct vhost_dev *vdev = (struct vhost_dev *)dev->priv;
-
- vq = dev->virtqueue[VIRTIO_TXQ];
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
-
- /* If there are no available buffers then return. */
- if (vq->last_used_idx_res == avail_idx)
- return;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh);
-
- /* Prefetch available ring to retrieve head indexes. */
- rte_prefetch0(&vq->avail->ring[vq->last_used_idx_res & (vq->size - 1)]);
-
- /* Get the number of free entries in the ring */
- free_entries = (avail_idx - vq->last_used_idx_res);
-
- /* Limit to MAX_PKT_BURST. */
- free_entries
- = (free_entries > MAX_PKT_BURST) ? MAX_PKT_BURST : free_entries;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n",
- dev->device_fh, free_entries);
-
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (i = 0; i < free_entries; i++)
- head[i]
- = vq->avail->ring[(vq->last_used_idx_res + i)
- & (vq->size - 1)];
-
- vq->last_used_idx_res += free_entries;
-
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
- rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
-
- while (packet_success < free_entries) {
- desc = &vq->desc[head[packet_success]];
-
- /* Discard first buffer as it is the virtio header */
- desc = &vq->desc[desc->next];
-
- /* Buffer address translation. */
- buff_addr = gpa_to_vva(dev, desc->addr);
- /* Need check extra VLAN_HLEN size for inserting VLAN tag */
- phys_addr = gpa_to_hpa(vdev, desc->addr, desc->len + VLAN_HLEN,
- &addr_type);
-
- if (likely(packet_success < (free_entries - 1)))
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success + 1]]);
-
- if (unlikely(addr_type == PHYS_ADDR_INVALID)) {
- RTE_LOG(ERR, VHOST_DATA,
- "(%"PRIu64") Invalid frame buffer address found"
- "when TX packets!\n",
- dev->device_fh);
- packet_success++;
- continue;
- }
-
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)buff_addr);
-
- /*
- * Setup dummy mbuf. This is copied to a real mbuf if
- * transmitted out the physical port.
- */
- m.data_len = desc->len;
- m.nb_segs = 1;
- m.next = NULL;
- m.data_off = 0;
- m.buf_addr = (void *)(uintptr_t)buff_addr;
- m.buf_physaddr = phys_addr;
-
- /*
- * Check if the frame buffer address from guest crosses
- * sub-region or not.
- */
- if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) {
- RTE_LOG(ERR, VHOST_DATA,
- "(%"PRIu64") Frame buffer address cross "
- "sub-regioin found when attaching TX frame "
- "buffer address!\n",
- dev->device_fh);
- need_copy = 1;
- } else
- need_copy = 0;
-
- PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0);
-
- /*
- * If this is the first received packet we need to learn
- * the MAC and setup VMDQ
- */
- if (unlikely(vdev->ready == DEVICE_MAC_LEARNING)) {
- if (vdev->remove || (link_vmdq(vdev, &m) == -1)) {
- /*
- * Discard frame if device is scheduled for
- * removal or a duplicate MAC address is found.
- */
- packet_success += free_entries;
- vq->last_used_idx += packet_success;
- break;
- }
- }
-
- virtio_tx_route_zcp(dev, &m, head[packet_success], need_copy);
- packet_success++;
- }
-}
-
-/*
- * This function is called by each data core. It handles all RX/TX registered
- * with the core. For TX the specific lcore linked list is used. For RX, MAC
- * addresses are compared with all devices in the main linked list.
- */
-static int
-switch_worker_zcp(__attribute__((unused)) void *arg)
-{
- struct virtio_net *dev = NULL;
- struct vhost_dev *vdev = NULL;
- struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
- struct virtio_net_data_ll *dev_ll;
- struct mbuf_table *tx_q;
- volatile struct lcore_ll_info *lcore_ll;
- const uint64_t drain_tsc
- = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S
- * BURST_TX_DRAIN_US;
- uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0;
- unsigned ret;
- const uint16_t lcore_id = rte_lcore_id();
- uint16_t count_in_ring, rx_count = 0;
-
- RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
-
- lcore_ll = lcore_info[lcore_id].lcore_ll;
- prev_tsc = 0;
-
- while (1) {
- cur_tsc = rte_rdtsc();
-
- /* TX burst queue drain */
- diff_tsc = cur_tsc - prev_tsc;
- if (unlikely(diff_tsc > drain_tsc)) {
- /*
- * Get mbuf from vpool.pool and detach mbuf and
- * put back into vpool.ring.
- */
- dev_ll = lcore_ll->ll_root_used;
- while ((dev_ll != NULL) && (dev_ll->vdev != NULL)) {
- /* Get virtio device ID */
- vdev = dev_ll->vdev;
- dev = vdev->dev;
-
- if (likely(!vdev->remove)) {
- tx_q = &tx_queue_zcp[(uint16_t)vdev->vmdq_rx_q];
- if (tx_q->len) {
- LOG_DEBUG(VHOST_DATA,
- "TX queue drained after timeout"
- " with burst size %u\n",
- tx_q->len);
-
- /*
- * Tx any packets in the queue
- */
- ret = rte_eth_tx_burst(
- ports[0],
- (uint16_t)tx_q->txq_id,
- (struct rte_mbuf **)
- tx_q->m_table,
- (uint16_t)tx_q->len);
- if (unlikely(ret < tx_q->len)) {
- do {
- rte_pktmbuf_free(
- tx_q->m_table[ret]);
- } while (++ret < tx_q->len);
- }
- tx_q->len = 0;
-
- txmbuf_clean_zcp(dev,
- &vpool_array[MAX_QUEUES+vdev->vmdq_rx_q]);
- }
- }
- dev_ll = dev_ll->next;
- }
- prev_tsc = cur_tsc;
- }
-
- rte_prefetch0(lcore_ll->ll_root_used);
-
- /*
- * Inform the configuration core that we have exited the linked
- * list and that no devices are in use if requested.
- */
- if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL)
- lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
-
- /* Process devices */
- dev_ll = lcore_ll->ll_root_used;
-
- while ((dev_ll != NULL) && (dev_ll->vdev != NULL)) {
- vdev = dev_ll->vdev;
- dev = vdev->dev;
- if (unlikely(vdev->remove)) {
- dev_ll = dev_ll->next;
- unlink_vmdq(vdev);
- vdev->ready = DEVICE_SAFE_REMOVE;
- continue;
- }
-
- if (likely(vdev->ready == DEVICE_RX)) {
- uint32_t index = vdev->vmdq_rx_q;
- uint16_t i;
- count_in_ring
- = rte_ring_count(vpool_array[index].ring);
- uint16_t free_entries
- = (uint16_t)get_available_ring_num_zcp(dev);
-
- /*
- * Attach all mbufs in vpool.ring and put back
- * into vpool.pool.
- */
- for (i = 0;
- i < RTE_MIN(free_entries,
- RTE_MIN(count_in_ring, MAX_PKT_BURST));
- i++)
- attach_rxmbuf_zcp(dev);
-
- /* Handle guest RX */
- rx_count = rte_eth_rx_burst(ports[0],
- vdev->vmdq_rx_q, pkts_burst,
- MAX_PKT_BURST);
-
- if (rx_count) {
- ret_count = virtio_dev_rx_zcp(dev,
- pkts_burst, rx_count);
- if (enable_stats) {
- dev_statistics[dev->device_fh].rx_total
- += rx_count;
- dev_statistics[dev->device_fh].rx
- += ret_count;
- }
- while (likely(rx_count)) {
- rx_count--;
- pktmbuf_detach_zcp(
- pkts_burst[rx_count]);
- rte_ring_sp_enqueue(
- vpool_array[index].ring,
- (void *)pkts_burst[rx_count]);
- }
- }
- }