+int rte_eth_timesync_read_tx_timestamp(uint8_t port_id,
+ struct timespec *timestamp);
+
+/**
+ * Adjust the timesync clock on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param delta
+ * The adjustment in nanoseconds.
+ *
+ * @return
+ * - 0: Success.
+ * - -ENODEV: The port ID is invalid.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_adjust_time(uint8_t port_id, int64_t delta);
+
+/**
+ * Read the time from the timesync clock on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param time
+ * Pointer to the timespec struct that holds the time.
+ *
+ * @return
+ * - 0: Success.
+ */
+int rte_eth_timesync_read_time(uint8_t port_id, struct timespec *time);
+
+/**
+ * Set the time of the timesync clock on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param time
+ * Pointer to the timespec struct that holds the time.
+ *
+ * @return
+ * - 0: Success.
+ * - -EINVAL: No timestamp is available.
+ * - -ENODEV: The port ID is invalid.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_write_time(uint8_t port_id, const struct timespec *time);
+
+/**
+ * Copy pci device info to the Ethernet device data.
+ *
+ * @param eth_dev
+ * The *eth_dev* pointer is the address of the *rte_eth_dev* structure.
+ * @param pci_dev
+ * The *pci_dev* pointer is the address of the *rte_pci_device* structure.
+ *
+ * @return
+ * - 0 on success, negative on error
+ */
+void rte_eth_copy_pci_info(struct rte_eth_dev *eth_dev,
+ struct rte_pci_device *pci_dev);
+
+/**
+ * Create memzone for HW rings.
+ * malloc can't be used as the physical address is needed.
+ * If the memzone is already created, then this function returns a ptr
+ * to the old one.
+ *
+ * @param eth_dev
+ * The *eth_dev* pointer is the address of the *rte_eth_dev* structure
+ * @param name
+ * The name of the memory zone
+ * @param queue_id
+ * The index of the queue to add to name
+ * @param size
+ * The sizeof of the memory area
+ * @param align
+ * Alignment for resulting memzone. Must be a power of 2.
+ * @param socket_id
+ * The *socket_id* argument is the socket identifier in case of NUMA.
+ */
+const struct rte_memzone *
+rte_eth_dma_zone_reserve(const struct rte_eth_dev *eth_dev, const char *name,
+ uint16_t queue_id, size_t size,
+ unsigned align, int socket_id);
+
+/**
+ * Config l2 tunnel ether type of an Ethernet device for filtering specific
+ * tunnel packets by ether type.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param l2_tunnel
+ * l2 tunnel configuration.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_l2_tunnel_eth_type_conf(uint8_t port_id,
+ struct rte_eth_l2_tunnel_conf *l2_tunnel);
+
+/**
+ * Enable/disable l2 tunnel offload functions. Include,
+ * 1, The ability of parsing a type of l2 tunnel of an Ethernet device.
+ * Filtering, forwarding and offloading this type of tunnel packets depend on
+ * this ability.
+ * 2, Stripping the l2 tunnel tag.
+ * 3, Insertion of the l2 tunnel tag.
+ * 4, Forwarding the packets based on the l2 tunnel tag.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param l2_tunnel
+ * l2 tunnel parameters.
+ * @param mask
+ * Indicate the offload function.
+ * @param en
+ * Enable or disable this function.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_l2_tunnel_offload_set(uint8_t port_id,
+ struct rte_eth_l2_tunnel_conf *l2_tunnel,
+ uint32_t mask,
+ uint8_t en);
+
+/**
+* Get the port id from pci adrress or device name
+* Ex: 0000:2:00.0 or vdev name eth_pcap0
+*
+* @param name
+* pci address or name of the device
+* @param port_id
+* pointer to port identifier of the device
+* @return
+* - (0) if successful.
+* - (-ENODEV or -EINVAL) on failure.
+*/
+int
+rte_eth_dev_get_port_by_name(const char *name, uint8_t *port_id);
+
+/**
+* Get the device name from port id
+*
+* @param port_id
+* pointer to port identifier of the device
+* @param name
+* pci address or name of the device
+* @return
+* - (0) if successful.
+* - (-EINVAL) on failure.
+*/
+int
+rte_eth_dev_get_name_by_port(uint8_t port_id, char *name);
+
+/**
+ * @internal
+ * Wrapper for use by pci drivers as a .probe function to attach to a ethdev
+ * interface.
+ */
+int rte_eth_dev_pci_probe(struct rte_pci_driver *pci_drv,
+ struct rte_pci_device *pci_dev);
+
+/**
+ * @internal
+ * Wrapper for use by pci drivers as a .remove function to detach a ethdev
+ * interface.
+ */
+int rte_eth_dev_pci_remove(struct rte_pci_device *pci_dev);
+
+#ifdef __cplusplus
+}
+#endif
+