-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * Copyright(c) 2014 6WIND S.A.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation.
+ * Copyright(c) 2014 6WIND S.A.
*/
+
#include <stdio.h>
#include "test.h"
-#ifndef RTE_EXEC_ENV_BAREMETAL
#include <string.h>
#include <stdarg.h>
#include <libgen.h>
-#include <stdio.h>
#include <stdlib.h>
#include <errno.h>
#include <unistd.h>
#include <sys/wait.h>
#include <sys/file.h>
#include <limits.h>
+#include <fcntl.h>
+#include <rte_lcore.h>
#include <rte_debug.h>
#include <rte_string_fns.h>
#include "process.h"
+#define DEFAULT_MEM_SIZE "18"
#define mp_flag "--proc-type=secondary"
#define no_hpet "--no-hpet"
#define no_huge "--no-huge"
#define memtest "memtest"
#define memtest1 "memtest1"
#define memtest2 "memtest2"
-#define SOCKET_MEM_STRLEN (RTE_MAX_NUMA_NODES * 10)
+#define SOCKET_MEM_STRLEN (RTE_MAX_NUMA_NODES * 20)
#define launch_proc(ARGV) process_dup(ARGV, \
sizeof(ARGV)/(sizeof(ARGV[0])), __func__)
return 0;
if (strncmp(tokens[2], "hugetlbfs", sizeof("hugetlbfs")) == 0) {
- rte_snprintf(dst, dst_len, "%s", tokens[1]);
+ strlcpy(dst, tokens[1], dst_len);
return 1;
}
return 0;
int fd, lck_result, result = 0;
- const int prefix_len = rte_snprintf(hugefile_prefix,
+ const int prefix_len = snprintf(hugefile_prefix,
sizeof(hugefile_prefix), "%smap_", prefix);
if (prefix_len <= 0 || prefix_len >= (int)sizeof(hugefile_prefix)
|| prefix_len >= (int)sizeof(dirent->d_name)) {
{
char file_path[PATH_MAX] = {0};
- rte_snprintf(file_path, sizeof(file_path),
+ snprintf(file_path, sizeof(file_path),
"%s/%s", hugedir, dirent->d_name);
/* remove file */
return result;
}
-#ifdef RTE_EXEC_ENV_LINUXAPP
+#ifdef RTE_EXEC_ENV_LINUX
/*
* count the number of "node*" files in /sys/devices/system/node/
*/
}
#endif
-static char*
-get_current_prefix(char * prefix, int size)
-{
- char path[PATH_MAX] = {0};
- char buf[PATH_MAX] = {0};
-
- /* get file for config (fd is always 3) */
- rte_snprintf(path, sizeof(path), "/proc/self/fd/%d", 3);
-
- /* return NULL on error */
- if (readlink(path, buf, sizeof(buf)) == -1)
- return NULL;
-
- /* get the basename */
- rte_snprintf(buf, sizeof(buf), "%s", basename(buf));
-
- /* copy string all the way from second char up to start of _config */
- rte_snprintf(prefix, size, "%.*s",
- strnlen(buf, sizeof(buf)) - sizeof("_config"), &buf[1]);
-
- return prefix;
-}
-
/*
* Test that the app doesn't run with invalid whitelist option.
* Final tests ensures it does run with valid options as sanity check (one
test_whitelist_flag(void)
{
unsigned i;
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point */
const char * prefix = "";
#else
printf("Error - unable to get current prefix!\n");
return -1;
}
- rte_snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
+ snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
#endif
- const char *wlinval[][11] = {
- {prgname, prefix, mp_flag, "-n", "1", "-c", "1",
+ const char *wlinval[][7] = {
+ {prgname, prefix, mp_flag,
pci_whitelist, "error", "", ""},
- {prgname, prefix, mp_flag, "-n", "1", "-c", "1",
+ {prgname, prefix, mp_flag,
pci_whitelist, "0:0:0", "", ""},
- {prgname, prefix, mp_flag, "-n", "1", "-c", "1",
+ {prgname, prefix, mp_flag,
pci_whitelist, "0:error:0.1", "", ""},
- {prgname, prefix, mp_flag, "-n", "1", "-c", "1",
+ {prgname, prefix, mp_flag,
pci_whitelist, "0:0:0.1error", "", ""},
- {prgname, prefix, mp_flag, "-n", "1", "-c", "1",
+ {prgname, prefix, mp_flag,
pci_whitelist, "error0:0:0.1", "", ""},
- {prgname, prefix, mp_flag, "-n", "1", "-c", "1",
+ {prgname, prefix, mp_flag,
pci_whitelist, "0:0:0.1.2", "", ""},
};
/* Test with valid whitelist option */
- const char *wlval1[] = {prgname, prefix, mp_flag, "-n", "1", "-c", "1",
+ const char *wlval1[] = {prgname, prefix, mp_flag,
pci_whitelist, "00FF:09:0B.3"};
- const char *wlval2[] = {prgname, prefix, mp_flag, "-n", "1", "-c", "1",
+ const char *wlval2[] = {prgname, prefix, mp_flag,
pci_whitelist, "09:0B.3", pci_whitelist, "0a:0b.1"};
- const char *wlval3[] = {prgname, prefix, mp_flag, "-n", "1", "-c", "1",
+ const char *wlval3[] = {prgname, prefix, mp_flag,
pci_whitelist, "09:0B.3,type=test",
pci_whitelist, "08:00.1,type=normal",
-#ifdef CONFIG_RTE_LIBRTE_PMD_RING
- vdev, "eth_ring,arg=test",
-#endif
};
for (i = 0; i < sizeof(wlinval) / sizeof(wlinval[0]); i++) {
static int
test_invalid_b_flag(void)
{
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point */
const char * prefix = "";
#else
printf("Error - unable to get current prefix!\n");
return -1;
}
- rte_snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
+ snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
#endif
- const char *blinval[][9] = {
- {prgname, prefix, mp_flag, "-n", "1", "-c", "1", "-b", "error"},
- {prgname, prefix, mp_flag, "-n", "1", "-c", "1", "-b", "0:0:0"},
- {prgname, prefix, mp_flag, "-n", "1", "-c", "1", "-b", "0:error:0.1"},
- {prgname, prefix, mp_flag, "-n", "1", "-c", "1", "-b", "0:0:0.1error"},
- {prgname, prefix, mp_flag, "-n", "1", "-c", "1", "-b", "error0:0:0.1"},
- {prgname, prefix, mp_flag, "-n", "1", "-c", "1", "-b", "0:0:0.1.2"},
+ const char *blinval[][5] = {
+ {prgname, prefix, mp_flag, "-b", "error"},
+ {prgname, prefix, mp_flag, "-b", "0:0:0"},
+ {prgname, prefix, mp_flag, "-b", "0:error:0.1"},
+ {prgname, prefix, mp_flag, "-b", "0:0:0.1error"},
+ {prgname, prefix, mp_flag, "-b", "error0:0:0.1"},
+ {prgname, prefix, mp_flag, "-b", "0:0:0.1.2"},
};
/* Test with valid blacklist option */
- const char *blval[] = {prgname, prefix, mp_flag, "-n", "1", "-c", "1", "-b", "FF:09:0B.3"};
+ const char *blval[] = {prgname, prefix, mp_flag,
+ "-b", "FF:09:0B.3"};
int i;
return 0;
}
+/*
+ * Test that the app doesn't run with invalid vdev option.
+ * Final test ensures it does run with valid options as sanity check
+ */
+static int
+test_invalid_vdev_flag(void)
+{
+#ifdef RTE_LIBRTE_PMD_RING
+#ifdef RTE_EXEC_ENV_FREEBSD
+ /* BSD target doesn't support prefixes at this point, and we also need to
+ * run another primary process here */
+ const char * prefix = no_shconf;
+#else
+ const char * prefix = "--file-prefix=vdev";
+#endif
+
+ /* Test with invalid vdev option */
+ const char *vdevinval[] = {prgname, prefix, no_huge,
+ vdev, "eth_dummy"};
+
+ /* Test with valid vdev option */
+ const char *vdevval1[] = {prgname, prefix, no_huge,
+ vdev, "net_ring0"};
+
+ const char *vdevval2[] = {prgname, prefix, no_huge,
+ vdev, "net_ring0,args=test"};
+
+ const char *vdevval3[] = {prgname, prefix, no_huge,
+ vdev, "net_ring0,nodeaction=r1:0:CREATE"};
+
+ if (launch_proc(vdevinval) == 0) {
+ printf("Error - process did run ok with invalid "
+ "vdev parameter\n");
+ return -1;
+ }
+
+ if (launch_proc(vdevval1) != 0) {
+ printf("Error - process did not run ok with valid vdev value\n");
+ return -1;
+ }
+
+ if (launch_proc(vdevval2) != 0) {
+ printf("Error - process did not run ok with valid vdev value,"
+ "with dummy args\n");
+ return -1;
+ }
+
+ if (launch_proc(vdevval3) != 0) {
+ printf("Error - process did not run ok with valid vdev value,"
+ "with valid args\n");
+ return -1;
+ }
+ return 0;
+#else
+ return TEST_SKIPPED;
+#endif
+}
/*
* Test that the app doesn't run with invalid -r option.
static int
test_invalid_r_flag(void)
{
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point */
const char * prefix = "";
#else
printf("Error - unable to get current prefix!\n");
return -1;
}
- rte_snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
+ snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
#endif
- const char *rinval[][9] = {
- {prgname, prefix, mp_flag, "-n", "1", "-c", "1", "-r", "error"},
- {prgname, prefix, mp_flag, "-n", "1", "-c", "1", "-r", "0"},
- {prgname, prefix, mp_flag, "-n", "1", "-c", "1", "-r", "-1"},
- {prgname, prefix, mp_flag, "-n", "1", "-c", "1", "-r", "17"},
+ const char *rinval[][5] = {
+ {prgname, prefix, mp_flag, "-r", "error"},
+ {prgname, prefix, mp_flag, "-r", "0"},
+ {prgname, prefix, mp_flag, "-r", "-1"},
+ {prgname, prefix, mp_flag, "-r", "17"},
};
/* Test with valid blacklist option */
- const char *rval[] = {prgname, prefix, mp_flag, "-n", "1", "-c", "1", "-r", "16"};
+ const char *rval[] = {prgname, prefix, mp_flag, "-r", "16"};
int i;
}
/*
- * Test that the app doesn't run without the coremask flag. In all cases
+ * Test that the app doesn't run without the coremask/corelist flags. In all cases
* should give an error and fail to run
*/
static int
test_missing_c_flag(void)
{
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point */
const char * prefix = "";
#else
printf("Error - unable to get current prefix!\n");
return -1;
}
- rte_snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
+ snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
#endif
/* -c flag but no coremask value */
- const char *argv1[] = { prgname, prefix, mp_flag, "-n", "3", "-c"};
- /* No -c flag at all */
- const char *argv2[] = { prgname, prefix, mp_flag, "-n", "3"};
+ const char *argv1[] = { prgname, prefix, mp_flag, "-c"};
+ /* No -c, -l or --lcores flag at all */
+ const char *argv2[] = { prgname, prefix, mp_flag};
/* bad coremask value */
- const char *argv3[] = { prgname, prefix, mp_flag, "-n", "3", "-c", "error" };
+ const char *argv3[] = { prgname, prefix, mp_flag,
+ "-c", "error" };
/* sanity check of tests - valid coremask value */
- const char *argv4[] = { prgname, prefix, mp_flag, "-n", "3", "-c", "1" };
+ const char *argv4[] = { prgname, prefix, mp_flag,
+ "-c", "1" };
+ /* -l flag but no corelist value */
+ const char *argv5[] = { prgname, prefix, mp_flag,
+ "-l"};
+ const char *argv6[] = { prgname, prefix, mp_flag,
+ "-l", " " };
+ /* bad corelist values */
+ const char *argv7[] = { prgname, prefix, mp_flag,
+ "-l", "error" };
+ const char *argv8[] = { prgname, prefix, mp_flag,
+ "-l", "1-" };
+ const char *argv9[] = { prgname, prefix, mp_flag,
+ "-l", "1," };
+ const char *argv10[] = { prgname, prefix, mp_flag,
+ "-l", "1#2" };
+ /* core number is negative value */
+ const char * const argv11[] = { prgname, prefix, mp_flag,
+ "-l", "-5" };
+ const char * const argv12[] = { prgname, prefix, mp_flag,
+ "-l", "-5-7" };
+ /* core number is maximum value */
+ const char * const argv13[] = { prgname, prefix, mp_flag,
+ "-l", RTE_STR(RTE_MAX_LCORE) };
+ const char * const argv14[] = { prgname, prefix, mp_flag,
+ "-l", "1-"RTE_STR(RTE_MAX_LCORE) };
+ /* sanity check test - valid corelist value */
+ const char * const argv15[] = { prgname, prefix, mp_flag,
+ "-l", "1-2,3" };
+
+ /* --lcores flag but no lcores value */
+ const char * const argv16[] = { prgname, prefix, mp_flag,
+ "--lcores" };
+ const char * const argv17[] = { prgname, prefix, mp_flag,
+ "--lcores", " " };
+ /* bad lcores value */
+ const char * const argv18[] = { prgname, prefix, mp_flag,
+ "--lcores", "1-3-5" };
+ const char * const argv19[] = { prgname, prefix, mp_flag,
+ "--lcores", "0-1,,2" };
+ const char * const argv20[] = { prgname, prefix, mp_flag,
+ "--lcores", "0-,1" };
+ const char * const argv21[] = { prgname, prefix, mp_flag,
+ "--lcores", "(0-,2-4)" };
+ const char * const argv22[] = { prgname, prefix, mp_flag,
+ "--lcores", "(-1,2)" };
+ const char * const argv23[] = { prgname, prefix, mp_flag,
+ "--lcores", "(2-4)@(2-4-6)" };
+ const char * const argv24[] = { prgname, prefix, mp_flag,
+ "--lcores", "(a,2)" };
+ const char * const argv25[] = { prgname, prefix, mp_flag,
+ "--lcores", "1-3@(1,3)" };
+ const char * const argv26[] = { prgname, prefix, mp_flag,
+ "--lcores", "3@((1,3)" };
+ const char * const argv27[] = { prgname, prefix, mp_flag,
+ "--lcores", "(4-7)=(1,3)" };
+ const char * const argv28[] = { prgname, prefix, mp_flag,
+ "--lcores", "[4-7]@(1,3)" };
+ /* sanity check of tests - valid lcores value */
+ const char * const argv29[] = { prgname, prefix, mp_flag,
+ "--lcores",
+ "0-1,2@(5-7),(3-5)@(0,2),(0,6),7"};
+
+ if (launch_proc(argv2) != 0) {
+ printf("Error - "
+ "process did not run ok when missing -c flag\n");
+ return -1;
+ }
if (launch_proc(argv1) == 0
- || launch_proc(argv2) == 0
|| launch_proc(argv3) == 0) {
- printf("Error - process ran without error when missing -c flag\n");
+ printf("Error - "
+ "process ran without error with invalid -c flag\n");
return -1;
}
if (launch_proc(argv4) != 0) {
- printf("Error - process did not run ok with valid coremask value\n");
+ printf("Error - "
+ "process did not run ok with valid coremask value\n");
+ return -1;
+ }
+
+ /* start -l test */
+ if (launch_proc(argv5) == 0
+ || launch_proc(argv6) == 0
+ || launch_proc(argv7) == 0
+ || launch_proc(argv8) == 0
+ || launch_proc(argv9) == 0
+ || launch_proc(argv10) == 0
+ || launch_proc(argv11) == 0
+ || launch_proc(argv12) == 0
+ || launch_proc(argv13) == 0
+ || launch_proc(argv14) == 0) {
+ printf("Error - "
+ "process ran without error with invalid -l flag\n");
+ return -1;
+ }
+ if (rte_lcore_is_enabled(0) && rte_lcore_is_enabled(1) &&
+ rte_lcore_is_enabled(2) && rte_lcore_is_enabled(3) &&
+ launch_proc(argv15) != 0) {
+ printf("Error - "
+ "process did not run ok with valid corelist value\n");
+ return -1;
+ }
+
+ /* start --lcores tests */
+ if (launch_proc(argv16) == 0 || launch_proc(argv17) == 0 ||
+ launch_proc(argv18) == 0 || launch_proc(argv19) == 0 ||
+ launch_proc(argv20) == 0 || launch_proc(argv21) == 0 ||
+ launch_proc(argv22) == 0 || launch_proc(argv23) == 0 ||
+ launch_proc(argv24) == 0 || launch_proc(argv25) == 0 ||
+ launch_proc(argv26) == 0 || launch_proc(argv27) == 0 ||
+ launch_proc(argv28) == 0) {
+ printf("Error - "
+ "process ran without error with invalid --lcore flag\n");
+ return -1;
+ }
+
+ if (rte_lcore_is_enabled(0) && rte_lcore_is_enabled(1) &&
+ rte_lcore_is_enabled(2) && rte_lcore_is_enabled(3) &&
+ rte_lcore_is_enabled(3) && rte_lcore_is_enabled(5) &&
+ rte_lcore_is_enabled(4) && rte_lcore_is_enabled(7) &&
+ launch_proc(argv29) != 0) {
+ printf("Error - "
+ "process did not run ok with valid corelist value\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Test --master-lcore option with matching coremask
+ */
+static int
+test_master_lcore_flag(void)
+{
+#ifdef RTE_EXEC_ENV_FREEBSD
+ /* BSD target doesn't support prefixes at this point */
+ const char *prefix = "";
+#else
+ char prefix[PATH_MAX], tmp[PATH_MAX];
+ if (get_current_prefix(tmp, sizeof(tmp)) == NULL) {
+ printf("Error - unable to get current prefix!\n");
+ return -1;
+ }
+ snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
+#endif
+
+ if (!rte_lcore_is_enabled(0) || !rte_lcore_is_enabled(1))
+ return TEST_SKIPPED;
+
+ /* --master-lcore flag but no value */
+ const char *argv1[] = { prgname, prefix, mp_flag,
+ "-c", "3", "--master-lcore"};
+ /* --master-lcore flag with invalid value */
+ const char *argv2[] = { prgname, prefix, mp_flag,
+ "-c", "3", "--master-lcore", "-1"};
+ const char *argv3[] = { prgname, prefix, mp_flag,
+ "-c", "3", "--master-lcore", "X"};
+ /* master lcore not in coremask */
+ const char *argv4[] = { prgname, prefix, mp_flag,
+ "-c", "3", "--master-lcore", "2"};
+ /* valid value */
+ const char *argv5[] = { prgname, prefix, mp_flag,
+ "-c", "3", "--master-lcore", "1"};
+ /* valid value set before coremask */
+ const char *argv6[] = { prgname, prefix, mp_flag,
+ "--master-lcore", "1", "-c", "3"};
+
+ if (launch_proc(argv1) == 0
+ || launch_proc(argv2) == 0
+ || launch_proc(argv3) == 0
+ || launch_proc(argv4) == 0) {
+ printf("Error - process ran without error with wrong --master-lcore\n");
+ return -1;
+ }
+ if (launch_proc(argv5) != 0
+ || launch_proc(argv6) != 0) {
+ printf("Error - process did not run ok with valid --master-lcore\n");
return -1;
}
return 0;
}
/*
- * Test that the app doesn't run without the -n flag. In all cases
- * should give an error and fail to run.
+ * Test that the app doesn't run with invalid -n flag option.
+ * Final test ensures it does run with valid options as sanity check
* Since -n is not compulsory for MP, we instead use --no-huge and --no-shconf
* flags.
*/
static int
-test_missing_n_flag(void)
+test_invalid_n_flag(void)
{
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point */
const char * prefix = "";
#else
printf("Error - unable to get current prefix!\n");
return -1;
}
- rte_snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
+ snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
#endif
/* -n flag but no value */
- const char *argv1[] = { prgname, prefix, no_huge, no_shconf, "-c", "1", "-n"};
- /* No -n flag at all */
- const char *argv2[] = { prgname, prefix, no_huge, no_shconf, "-c", "1"};
+ const char *argv1[] = { prgname, prefix, no_huge, no_shconf,
+ "-n"};
/* bad numeric value */
- const char *argv3[] = { prgname, prefix, no_huge, no_shconf, "-c", "1", "-n", "e" };
- /* out-of-range value */
- const char *argv4[] = { prgname, prefix, no_huge, no_shconf, "-c", "1", "-n", "9" };
+ const char *argv2[] = { prgname, prefix, no_huge, no_shconf,
+ "-n", "e" };
+ /* zero is invalid */
+ const char *argv3[] = { prgname, prefix, no_huge, no_shconf,
+ "-n", "0" };
/* sanity test - check with good value */
- const char *argv5[] = { prgname, prefix, no_huge, no_shconf, "-c", "1", "-n", "2" };
+ const char *argv4[] = { prgname, prefix, no_huge, no_shconf,
+ "-n", "2" };
+ /* sanity test - check with no -n flag */
+ const char *argv5[] = { prgname, prefix, no_huge, no_shconf};
if (launch_proc(argv1) == 0
|| launch_proc(argv2) == 0
- || launch_proc(argv3) == 0
- || launch_proc(argv4) == 0) {
- printf("Error - process ran without error when missing -n flag\n");
+ || launch_proc(argv3) == 0) {
+ printf("Error - process ran without error when"
+ "invalid -n flag\n");
return -1;
}
- if (launch_proc(argv5) != 0) {
+ if (launch_proc(argv4) != 0) {
printf("Error - process did not run ok with valid num-channel value\n");
return -1;
}
+ if (launch_proc(argv5) != 0) {
+ printf("Error - process did not run ok without -n flag\n");
+ return -1;
+ }
+
return 0;
}
static int
test_no_hpet_flag(void)
{
- char prefix[PATH_MAX], tmp[PATH_MAX];
+ char prefix[PATH_MAX] = "";
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
return 0;
-#endif
+#else
+ char tmp[PATH_MAX];
if (get_current_prefix(tmp, sizeof(tmp)) == NULL) {
printf("Error - unable to get current prefix!\n");
return -1;
}
- rte_snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
+ snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
+#endif
/* With --no-hpet */
- const char *argv1[] = {prgname, prefix, mp_flag, no_hpet, "-c", "1", "-n", "2"};
+ const char *argv1[] = {prgname, prefix, mp_flag, no_hpet};
/* Without --no-hpet */
- const char *argv2[] = {prgname, prefix, mp_flag, "-c", "1", "-n", "2"};
+ const char *argv2[] = {prgname, prefix, mp_flag};
if (launch_proc(argv1) != 0) {
printf("Error - process did not run ok with --no-hpet flag\n");
}
/*
- * Test that the app runs with --no-huge and doesn't run when either
- * -m or --socket-mem are specified with --no-huge.
+ * Test that the app runs with --no-huge and doesn't run when --socket-mem are
+ * specified with --no-huge.
*/
static int
test_no_huge_flag(void)
{
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point, and we also need to
* run another primary process here */
const char * prefix = no_shconf;
#endif
/* With --no-huge */
- const char *argv1[] = {prgname, prefix, no_huge, "-c", "1", "-n", "2"};
+ const char *argv1[] = {prgname, prefix, no_huge};
/* With --no-huge and -m */
- const char *argv2[] = {prgname, prefix, no_huge, "-c", "1", "-n", "2", "-m", "2"};
+ const char *argv2[] = {prgname, prefix, no_huge,
+ "-m", DEFAULT_MEM_SIZE};
/* With --no-huge and --socket-mem */
- const char *argv3[] = {prgname, prefix, no_huge, "-c", "1", "-n", "2",
- "--socket-mem=2"};
+ const char *argv3[] = {prgname, prefix, no_huge,
+ "--socket-mem=" DEFAULT_MEM_SIZE};
/* With --no-huge, -m and --socket-mem */
- const char *argv4[] = {prgname, prefix, no_huge, "-c", "1", "-n", "2",
- "-m", "2", "--socket-mem=2"};
+ const char *argv4[] = {prgname, prefix, no_huge,
+ "-m", DEFAULT_MEM_SIZE, "--socket-mem=" DEFAULT_MEM_SIZE};
if (launch_proc(argv1) != 0) {
printf("Error - process did not run ok with --no-huge flag\n");
return -1;
}
- if (launch_proc(argv2) == 0) {
- printf("Error - process run ok with --no-huge and -m flags\n");
+ if (launch_proc(argv2) != 0) {
+ printf("Error - process did not run ok with --no-huge and -m flags\n");
return -1;
}
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target does not support NUMA, hence no --socket-mem tests */
return 0;
#endif
return 0;
}
-#ifdef RTE_LIBRTE_XEN_DOM0
-static int
-test_dom0_misc_flags(void)
-{
- char prefix[PATH_MAX], tmp[PATH_MAX];
-
- if (get_current_prefix(tmp, sizeof(tmp)) == NULL) {
- printf("Error - unable to get current prefix!\n");
- return -1;
- }
- rte_snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
-
- /* check that some general flags don't prevent things from working.
- * All cases, apart from the first, app should run.
- * No futher testing of output done.
- */
- /* sanity check - failure with invalid option */
- const char *argv0[] = {prgname, prefix, mp_flag, "-c", "1", "--invalid-opt"};
-
- /* With --no-pci */
- const char *argv1[] = {prgname, prefix, mp_flag, "-c", "1", "--no-pci"};
- /* With -v */
- const char *argv2[] = {prgname, prefix, mp_flag, "-c", "1", "-v"};
- /* With valid --syslog */
- const char *argv3[] = {prgname, prefix, mp_flag, "-c", "1",
- "--syslog", "syslog"};
- /* With empty --syslog (should fail) */
- const char *argv4[] = {prgname, prefix, mp_flag, "-c", "1", "--syslog"};
- /* With invalid --syslog */
- const char *argv5[] = {prgname, prefix, mp_flag, "-c", "1", "--syslog", "error"};
- /* With no-sh-conf */
- const char *argv6[] = {prgname, "-c", "1", "-n", "2", "-m", "20",
- "--no-shconf", "--file-prefix=noshconf" };
-
- if (launch_proc(argv0) == 0) {
- printf("Error - process ran ok with invalid flag\n");
- return -1;
- }
- if (launch_proc(argv1) != 0) {
- printf("Error - process did not run ok with --no-pci flag\n");
- return -1;
- }
- if (launch_proc(argv2) != 0) {
- printf("Error - process did not run ok with -v flag\n");
- return -1;
- }
- if (launch_proc(argv3) != 0) {
- printf("Error - process did not run ok with --syslog flag\n");
- return -1;
- }
- if (launch_proc(argv4) == 0) {
- printf("Error - process run ok with empty --syslog flag\n");
- return -1;
- }
- if (launch_proc(argv5) == 0) {
- printf("Error - process run ok with invalid --syslog flag\n");
- return -1;
- }
- if (launch_proc(argv6) != 0) {
- printf("Error - process did not run ok with --no-shconf flag\n");
- return -1;
- }
-
- return 0;
-}
-#else
static int
test_misc_flags(void)
{
char hugepath[PATH_MAX] = {0};
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point */
const char * prefix = "";
const char * nosh_prefix = "";
printf("Error - unable to get current prefix!\n");
return -1;
}
- rte_snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
+ snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
/*
* get first valid hugepage path
/* check that some general flags don't prevent things from working.
* All cases, apart from the first, app should run.
- * No futher testing of output done.
+ * No further testing of output done.
*/
/* sanity check - failure with invalid option */
- const char *argv0[] = {prgname, prefix, mp_flag, "-c", "1", "--invalid-opt"};
+ const char *argv0[] = {prgname, prefix, mp_flag, "--invalid-opt"};
/* With --no-pci */
- const char *argv1[] = {prgname, prefix, mp_flag, "-c", "1", "--no-pci"};
+ const char *argv1[] = {prgname, prefix, mp_flag, "--no-pci"};
/* With -v */
- const char *argv2[] = {prgname, prefix, mp_flag, "-c", "1", "-v"};
+ const char *argv2[] = {prgname, prefix, mp_flag, "-v"};
/* With valid --syslog */
- const char *argv3[] = {prgname, prefix, mp_flag, "-c", "1",
+ const char *argv3[] = {prgname, prefix, mp_flag,
"--syslog", "syslog"};
/* With empty --syslog (should fail) */
- const char *argv4[] = {prgname, prefix, mp_flag, "-c", "1", "--syslog"};
+ const char *argv4[] = {prgname, prefix, mp_flag, "--syslog"};
/* With invalid --syslog */
- const char *argv5[] = {prgname, prefix, mp_flag, "-c", "1", "--syslog", "error"};
- /* With no-sh-conf */
- const char *argv6[] = {prgname, "-c", "1", "-n", "2", "-m", "2",
- no_shconf, nosh_prefix };
+ const char *argv5[] = {prgname, prefix, mp_flag, "--syslog", "error"};
+ /* With no-sh-conf, also use no-huge to ensure this test runs on BSD */
+ const char *argv6[] = {prgname, "-m", DEFAULT_MEM_SIZE,
+ no_shconf, nosh_prefix, no_huge};
-#ifdef RTE_EXEC_ENV_BSDAPP
- return 0;
-#endif
/* With --huge-dir */
- const char *argv7[] = {prgname, "-c", "1", "-n", "2", "-m", "2",
+ const char *argv7[] = {prgname, "-m", DEFAULT_MEM_SIZE,
"--file-prefix=hugedir", "--huge-dir", hugepath};
/* With empty --huge-dir (should fail) */
- const char *argv8[] = {prgname, "-c", "1", "-n", "2", "-m", "2",
+ const char *argv8[] = {prgname, "-m", DEFAULT_MEM_SIZE,
"--file-prefix=hugedir", "--huge-dir"};
/* With invalid --huge-dir */
- const char *argv9[] = {prgname, "-c", "1", "-n", "2", "-m", "2",
+ const char *argv9[] = {prgname, "-m", DEFAULT_MEM_SIZE,
"--file-prefix=hugedir", "--huge-dir", "invalid"};
/* Secondary process with invalid --huge-dir (should run as flag has no
* effect on secondary processes) */
- const char *argv10[] = {prgname, prefix, mp_flag, "-c", "1", "--huge-dir", "invalid"};
+ const char *argv10[] = {prgname, prefix, mp_flag,
+ "--huge-dir", "invalid"};
/* try running with base-virtaddr param */
const char *argv11[] = {prgname, "--file-prefix=virtaddr",
- "-c", "1", "-n", "2", "--base-virtaddr=0x12345678"};
+ "--base-virtaddr=0x12345678"};
+
+ /* try running with --vfio-intr INTx flag */
+ const char *argv12[] = {prgname, "--file-prefix=intr",
+ "--vfio-intr=legacy"};
+
+ /* try running with --vfio-intr MSI flag */
+ const char *argv13[] = {prgname, "--file-prefix=intr",
+ "--vfio-intr=msi"};
+ /* try running with --vfio-intr MSI-X flag */
+ const char *argv14[] = {prgname, "--file-prefix=intr",
+ "--vfio-intr=msix"};
+
+ /* try running with --vfio-intr invalid flag */
+ const char *argv15[] = {prgname, "--file-prefix=intr",
+ "--vfio-intr=invalid"};
+
+ /* With process type as auto-detect */
+ const char * const argv16[] = {prgname, "--file-prefix=auto",
+ "--proc-type=auto"};
+
+ /* With process type as auto-detect with no-shconf */
+ const char * const argv17[] = {prgname, "--proc-type=auto",
+ no_shconf, nosh_prefix, no_huge};
+
+ /* With process type as --create-uio-dev flag */
+ const char * const argv18[] = {prgname, "--file-prefix=uiodev",
+ "--create-uio-dev"};
+
+ /* run all tests also applicable to FreeBSD first */
if (launch_proc(argv0) == 0) {
printf("Error - process ran ok with invalid flag\n");
printf("Error - process did not run ok with -v flag\n");
return -1;
}
+ if (launch_proc(argv6) != 0) {
+ printf("Error - process did not run ok with --no-shconf flag\n");
+ return -1;
+ }
+
+#ifdef RTE_EXEC_ENV_FREEBSD
+ /* no more tests to be done on FreeBSD */
+ return 0;
+#endif
+
if (launch_proc(argv3) != 0) {
printf("Error - process did not run ok with --syslog flag\n");
return -1;
printf("Error - process run ok with invalid --syslog flag\n");
return -1;
}
- if (launch_proc(argv6) != 0) {
- printf("Error - process did not run ok with --no-shconf flag\n");
- return -1;
- }
-#ifdef RTE_EXEC_ENV_BSDAPP
- return 0;
-#endif
if (launch_proc(argv7) != 0) {
printf("Error - process did not run ok with --huge-dir flag\n");
return -1;
printf("Error - process did not run ok with --base-virtaddr parameter\n");
return -1;
}
+ if (launch_proc(argv12) != 0) {
+ printf("Error - process did not run ok with "
+ "--vfio-intr INTx parameter\n");
+ return -1;
+ }
+ if (launch_proc(argv13) != 0) {
+ printf("Error - process did not run ok with "
+ "--vfio-intr MSI parameter\n");
+ return -1;
+ }
+ if (launch_proc(argv14) != 0) {
+ printf("Error - process did not run ok with "
+ "--vfio-intr MSI-X parameter\n");
+ return -1;
+ }
+ if (launch_proc(argv15) == 0) {
+ printf("Error - process run ok with "
+ "--vfio-intr invalid parameter\n");
+ return -1;
+ }
+ if (launch_proc(argv16) != 0) {
+ printf("Error - process did not run ok with "
+ "--proc-type as auto parameter\n");
+ return -1;
+ }
+ if (launch_proc(argv17) != 0) {
+ printf("Error - process did not run ok with "
+ "--proc-type and --no-shconf parameter\n");
+ return -1;
+ }
+ if (launch_proc(argv18) != 0) {
+ printf("Error - process did not run ok with "
+ "--create-uio-dev parameter\n");
+ return -1;
+ }
+
return 0;
}
-#endif
static int
test_file_prefix(void)
* 2. try to run secondary process without a corresponding primary process
* (while failing to run, it will also remove any unused hugepage files)
* 3. check if current process hugefiles are still in place and are locked
- * 4. run a primary process with memtest1 prefix
- * 5. check if memtest1 hugefiles are created
- * 6. run a primary process with memtest2 prefix
- * 7. check that only memtest2 hugefiles are present in the hugedir
+ * 4. run a primary process with memtest1 prefix in default and legacy
+ * mem mode
+ * 5. check if memtest1 hugefiles are created in case of legacy mem
+ * mode, and deleted in case of default mem mode
+ * 6. run a primary process with memtest2 prefix in default and legacy
+ * mem modes
+ * 7. check that memtest2 hugefiles are present in the hugedir after a
+ * run in legacy mode, and not present at all after run in default
+ * mem mode
*/
+ char prefix[PATH_MAX] = "";
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
return 0;
+#else
+ if (get_current_prefix(prefix, sizeof(prefix)) == NULL) {
+ printf("Error - unable to get current prefix!\n");
+ return -1;
+ }
#endif
/* this should fail unless the test itself is run with "memtest" prefix */
- const char *argv0[] = {prgname, mp_flag, "-c", "1", "-n", "2", "-m", "2",
- "--file-prefix=" memtest };
+ const char *argv0[] = {prgname, mp_flag, "-m",
+ DEFAULT_MEM_SIZE, "--file-prefix=" memtest };
- /* primary process with memtest1 */
- const char *argv1[] = {prgname, "-c", "1", "-n", "2", "-m", "2",
- "--file-prefix=" memtest1 };
+ /* primary process with memtest1 and default mem mode */
+ const char *argv1[] = {prgname, "-m",
+ DEFAULT_MEM_SIZE, "--file-prefix=" memtest1 };
- /* primary process with memtest2 */
- const char *argv2[] = {prgname, "-c", "1", "-n", "2", "-m", "2",
- "--file-prefix=" memtest2 };
+ /* primary process with memtest1 and legacy mem mode */
+ const char *argv2[] = {prgname, "-m",
+ DEFAULT_MEM_SIZE, "--file-prefix=" memtest1,
+ "--legacy-mem" };
- char prefix[32];
- if (get_current_prefix(prefix, sizeof(prefix)) == NULL) {
- printf("Error - unable to get current prefix!\n");
- return -1;
- }
-#ifdef RTE_LIBRTE_XEN_DOM0
- return 0;
-#endif
+ /* primary process with memtest2 and legacy mem mode */
+ const char *argv3[] = {prgname, "-m",
+ DEFAULT_MEM_SIZE, "--file-prefix=" memtest2,
+ "--legacy-mem" };
+
+ /* primary process with memtest2 and default mem mode */
+ const char *argv4[] = {prgname, "-m",
+ DEFAULT_MEM_SIZE, "--file-prefix=" memtest2 };
+
+ /* primary process with --in-memory mode */
+ const char * const argv5[] = {prgname, "-m",
+ DEFAULT_MEM_SIZE, "--in-memory" };
+
+ /* primary process with memtest1 and --in-memory mode */
+ const char * const argv6[] = {prgname, "-m",
+ DEFAULT_MEM_SIZE, "--in-memory",
+ "--file-prefix=" memtest1 };
+
+ /* primary process with parent file-prefix and --in-memory mode */
+ const char * const argv7[] = {prgname, "-m",
+ DEFAULT_MEM_SIZE, "--in-memory", "--file-prefix", prefix };
+
+ /* primary process with memtest1 and --single-file-segments mode */
+ const char * const argv8[] = {prgname, "-m",
+ DEFAULT_MEM_SIZE, "--single-file-segments",
+ "--file-prefix=" memtest1 };
/* check if files for current prefix are present */
if (process_hugefiles(prefix, HUGEPAGE_CHECK_EXISTS) != 1) {
return -1;
}
+ /* we're running this process in default memory mode, which means it
+ * should clean up after itself on exit and leave no hugepages behind.
+ */
if (launch_proc(argv1) != 0) {
- printf("Error - failed to run with --file-prefix=%s\n", memtest);
+ printf("Error - failed to run with --file-prefix=%s\n",
+ memtest1);
return -1;
}
/* check if memtest1_map0 is present */
- if (process_hugefiles(memtest1, HUGEPAGE_CHECK_EXISTS) != 1) {
- printf("Error - hugepage files for %s were not created!\n", memtest1);
+ if (process_hugefiles(memtest1, HUGEPAGE_CHECK_EXISTS) != 0) {
+ printf("Error - hugepage files for %s were not deleted!\n",
+ memtest1);
return -1;
}
+ /* now, we're running a process under the same prefix, but with legacy
+ * mem mode - this should leave behind hugepage files.
+ */
if (launch_proc(argv2) != 0) {
- printf("Error - failed to run with --file-prefix=%s\n", memtest2);
+ printf("Error - failed to run with --file-prefix=%s\n",
+ memtest1);
+ return -1;
+ }
+
+ /* check if memtest1_map0 is present */
+ if (process_hugefiles(memtest1, HUGEPAGE_CHECK_EXISTS) != 1) {
+ printf("Error - hugepage files for %s were not created!\n",
+ memtest1);
+ return -1;
+ }
+
+ if (launch_proc(argv3) != 0) {
+ printf("Error - failed to run with --file-prefix=%s\n",
+ memtest2);
return -1;
}
/* check if hugefiles for memtest2 are present */
if (process_hugefiles(memtest2, HUGEPAGE_CHECK_EXISTS) != 1) {
- printf("Error - hugepage files for %s were not created!\n", memtest2);
+ printf("Error - hugepage files for %s were not created!\n",
+ memtest2);
+ return -1;
+ }
+
+ /* check if hugefiles for memtest1 are present */
+ if (process_hugefiles(memtest1, HUGEPAGE_CHECK_EXISTS) != 0) {
+ printf("Error - hugepage files for %s were not deleted!\n",
+ memtest1);
+ return -1;
+ }
+
+ /* this process will run in default mem mode, so it should not leave any
+ * hugepage files behind.
+ */
+ if (launch_proc(argv4) != 0) {
+ printf("Error - failed to run with --file-prefix=%s\n",
+ memtest2);
+ return -1;
+ }
+
+ /* check if hugefiles for memtest2 are present */
+ if (process_hugefiles(memtest2, HUGEPAGE_CHECK_EXISTS) != 0) {
+ printf("Error - hugepage files for %s were not deleted!\n",
+ memtest2);
+ return -1;
+ }
+
+ /* check if hugefiles for memtest1 are present */
+ if (process_hugefiles(memtest1, HUGEPAGE_CHECK_EXISTS) != 0) {
+ printf("Error - hugepage files for %s were not deleted!\n",
+ memtest1);
+ return -1;
+ }
+
+ /* this process will run in --in-memory mode, so it should not leave any
+ * hugepage files behind.
+ */
+
+ /* test case to check eal-options with --in-memory mode */
+ if (launch_proc(argv5) != 0) {
+ printf("Error - failed to run with --in-memory mode\n");
+ return -1;
+ }
+
+ /*test case to check eal-options with --in-memory mode with
+ * custom file-prefix.
+ */
+ if (launch_proc(argv6) != 0) {
+ printf("Error - failed to run with --in-memory mode\n");
return -1;
}
/* check if hugefiles for memtest1 are present */
if (process_hugefiles(memtest1, HUGEPAGE_CHECK_EXISTS) != 0) {
- printf("Error - hugepage files for %s were not deleted!\n", memtest1);
+ printf("Error - hugepage files for %s were created and not deleted!\n",
+ memtest1);
+ return -1;
+ }
+
+ /* test case to check eal-options with --in-memory mode with
+ * parent file-prefix.
+ */
+ if (launch_proc(argv7) != 0) {
+ printf("Error - failed to run with --file-prefix=%s\n", prefix);
+ return -1;
+ }
+
+ /* this process will run in --single-file-segments mode,
+ * so it should not leave any hugepage files behind.
+ */
+ if (launch_proc(argv8) != 0) {
+ printf("Error - failed to run with --single-file-segments mode\n");
+ return -1;
+ }
+
+ /* check if hugefiles for memtest1 are present */
+ if (process_hugefiles(memtest1, HUGEPAGE_CHECK_EXISTS) != 0) {
+ printf("Error - hugepage files for %s were not deleted!\n",
+ memtest1);
return -1;
}
return 0;
}
+/* This function writes in passed buf pointer a valid --socket-mem= option
+ * for num_sockets then concatenates the provided suffix string.
+ *
+ * Example for num_sockets 4, mem "2", suffix "plop"
+ * --socket-mem=2,2,2,2plop
+ */
+static void
+populate_socket_mem_param(int num_sockets, const char *mem,
+ const char *suffix, char *buf, size_t buf_size)
+{
+ unsigned int offset = 0;
+ int written;
+ int i;
+
+ written = snprintf(&buf[offset], buf_size - offset, "--socket-mem=");
+ if (written < 0 || written + offset >= buf_size)
+ return;
+ offset += written;
+
+ for (i = 0; i < num_sockets - 1; i++) {
+ written = snprintf(&buf[offset], buf_size - offset,
+ "%s,", mem);
+ if (written < 0 || written + offset >= buf_size)
+ return;
+ offset += written;
+ }
+
+ written = snprintf(&buf[offset], buf_size - offset, "%s%s", mem,
+ suffix);
+ if (written < 0 || written + offset >= buf_size)
+ return;
+ offset += written;
+}
+
/*
* Tests for correct handling of -m and --socket-mem flags
*/
static int
test_memory_flags(void)
{
- const char* mem_size = NULL;
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* BSD target doesn't support prefixes at this point */
const char * prefix = "";
#else
printf("Error - unable to get current prefix!\n");
return -1;
}
- rte_snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
+ snprintf(prefix, sizeof(prefix), "--file-prefix=%s", tmp);
#endif
-#ifdef RTE_LIBRTE_XEN_DOM0
- mem_size = "30";
-#else
- mem_size = "2";
-#endif
-
/* valid -m flag and mp flag */
- const char *argv0[] = {prgname, prefix, mp_flag, "-c", "10",
- "-n", "2", "-m", mem_size};
+ const char *argv0[] = {prgname, prefix, mp_flag,
+ "-m", DEFAULT_MEM_SIZE};
/* valid -m flag */
- const char *argv1[] = {prgname, "-c", "10", "-n", "2",
- "--file-prefix=" memtest, "-m", mem_size};
+ const char *argv1[] = {prgname,
+ "--file-prefix=" memtest, "-m", DEFAULT_MEM_SIZE};
- /* invalid (zero) --socket-mem flag */
- const char *argv2[] = {prgname, "-c", "10", "-n", "2",
- "--file-prefix=" memtest, "--socket-mem=0,0,0,0"};
+ /* valid (zero) --socket-mem flag */
+ char arg2_socket_mem[SOCKET_MEM_STRLEN];
+ const char *argv2[] = {prgname,
+ "--file-prefix=" memtest, arg2_socket_mem};
/* invalid (incomplete) --socket-mem flag */
- const char *argv3[] = {prgname, "-c", "10", "-n", "2",
- "--file-prefix=" memtest, "--socket-mem=2,2,"};
+ char arg3_socket_mem[SOCKET_MEM_STRLEN];
+ const char *argv3[] = {prgname,
+ "--file-prefix=" memtest, arg3_socket_mem};
/* invalid (mixed with invalid data) --socket-mem flag */
- const char *argv4[] = {prgname, "-c", "10", "-n", "2",
- "--file-prefix=" memtest, "--socket-mem=2,2,Fred"};
+ char arg4_socket_mem[SOCKET_MEM_STRLEN];
+ const char *argv4[] = {prgname,
+ "--file-prefix=" memtest, arg4_socket_mem};
/* invalid (with numeric value as last character) --socket-mem flag */
- const char *argv5[] = {prgname, "-c", "10", "-n", "2",
- "--file-prefix=" memtest, "--socket-mem=2,2,Fred0"};
+ char arg5_socket_mem[SOCKET_MEM_STRLEN];
+ const char *argv5[] = {prgname,
+ "--file-prefix=" memtest, arg5_socket_mem};
/* invalid (with empty socket) --socket-mem flag */
- const char *argv6[] = {prgname, "-c", "10", "-n", "2",
- "--file-prefix=" memtest, "--socket-mem=2,,2"};
+ char arg6_socket_mem[SOCKET_MEM_STRLEN];
+ const char *argv6[] = {prgname,
+ "--file-prefix=" memtest, arg6_socket_mem};
/* invalid (null) --socket-mem flag */
- const char *argv7[] = {prgname, "-c", "10", "-n", "2",
+ const char *argv7[] = {prgname,
"--file-prefix=" memtest, "--socket-mem="};
/* valid --socket-mem specified together with -m flag */
- const char *argv8[] = {prgname, "-c", "10", "-n", "2",
- "--file-prefix=" memtest, "-m", "2", "--socket-mem=2,2"};
+ char arg8_socket_mem[SOCKET_MEM_STRLEN];
+ const char *argv8[] = {prgname,
+ "--file-prefix=" memtest, "-m", DEFAULT_MEM_SIZE,
+ arg8_socket_mem};
- /* construct an invalid socket mask with 2 megs on each socket plus
- * extra 2 megs on socket that doesn't exist on current system */
- char invalid_socket_mem[SOCKET_MEM_STRLEN];
- char buf[SOCKET_MEM_STRLEN]; /* to avoid copying string onto itself */
-
-#ifdef RTE_EXEC_ENV_BSDAPP
- int i, num_sockets = 1;
+#ifdef RTE_EXEC_ENV_FREEBSD
+ int num_sockets = 1;
#else
- int i, num_sockets = get_number_of_sockets();
+ int num_sockets = RTE_MIN(get_number_of_sockets(),
+ RTE_MAX_NUMA_NODES);
#endif
- if (num_sockets <= 0 || num_sockets > RTE_MAX_NUMA_NODES) {
+ if (num_sockets <= 0) {
printf("Error - cannot get number of sockets!\n");
return -1;
}
- rte_snprintf(invalid_socket_mem, sizeof(invalid_socket_mem), "--socket-mem=");
-
- /* add one extra socket */
- for (i = 0; i < num_sockets + 1; i++) {
- rte_snprintf(buf, sizeof(buf), "%s2", invalid_socket_mem);
- rte_snprintf(invalid_socket_mem, sizeof(invalid_socket_mem), "%s", buf);
-
- if (num_sockets + 1 - i > 1) {
- rte_snprintf(buf, sizeof(buf), "%s,", invalid_socket_mem);
- rte_snprintf(invalid_socket_mem, sizeof(invalid_socket_mem), "%s", buf);
- }
- }
-
- /* construct a valid socket mask with 2 megs on each existing socket */
- char valid_socket_mem[SOCKET_MEM_STRLEN];
-
- rte_snprintf(valid_socket_mem, sizeof(valid_socket_mem), "--socket-mem=");
-
- /* add one extra socket */
- for (i = 0; i < num_sockets; i++) {
- rte_snprintf(buf, sizeof(buf), "%s2", valid_socket_mem);
- rte_snprintf(valid_socket_mem, sizeof(valid_socket_mem), "%s", buf);
-
- if (num_sockets - i > 1) {
- rte_snprintf(buf, sizeof(buf), "%s,", valid_socket_mem);
- rte_snprintf(valid_socket_mem, sizeof(valid_socket_mem), "%s", buf);
- }
- }
-
/* invalid --socket-mem flag (with extra socket) */
- const char *argv9[] = {prgname, "-c", "10", "-n", "2",
+ char invalid_socket_mem[SOCKET_MEM_STRLEN];
+ const char *argv9[] = {prgname,
"--file-prefix=" memtest, invalid_socket_mem};
/* valid --socket-mem flag */
- const char *argv10[] = {prgname, "-c", "10", "-n", "2",
+ char valid_socket_mem[SOCKET_MEM_STRLEN];
+ const char *argv10[] = {prgname,
"--file-prefix=" memtest, valid_socket_mem};
if (launch_proc(argv0) != 0) {
return -1;
}
-#ifdef RTE_EXEC_ENV_BSDAPP
+#ifdef RTE_EXEC_ENV_FREEBSD
/* no other tests are applicable to BSD */
return 0;
#endif
printf("Error - process failed with valid -m flag!\n");
return -1;
}
-#ifdef RTE_LIBRTE_XEN_DOM0
- return 0;
-#endif
- if (launch_proc(argv2) == 0) {
- printf("Error - process run ok with invalid (zero) --socket-mem!\n");
+
+ populate_socket_mem_param(num_sockets, "0", "",
+ arg2_socket_mem, sizeof(arg2_socket_mem));
+ if (launch_proc(argv2) != 0) {
+ printf("Error - process failed with valid (zero) --socket-mem!\n");
return -1;
}
- if (launch_proc(argv3) == 0) {
- printf("Error - process run ok with invalid "
+ if (num_sockets > 1) {
+ populate_socket_mem_param(num_sockets - 1, "2", ",",
+ arg3_socket_mem, sizeof(arg3_socket_mem));
+ if (launch_proc(argv3) == 0) {
+ printf("Error - process run ok with invalid "
"(incomplete) --socket-mem!\n");
- return -1;
- }
+ return -1;
+ }
- if (launch_proc(argv4) == 0) {
- printf("Error - process run ok with invalid "
+ populate_socket_mem_param(num_sockets - 1, "2", ",Fred",
+ arg4_socket_mem, sizeof(arg4_socket_mem));
+ if (launch_proc(argv4) == 0) {
+ printf("Error - process run ok with invalid "
"(mixed with invalid input) --socket-mem!\n");
- return -1;
- }
+ return -1;
+ }
- if (launch_proc(argv5) == 0) {
- printf("Error - process run ok with invalid "
+ populate_socket_mem_param(num_sockets - 1, "2", ",Fred0",
+ arg5_socket_mem, sizeof(arg5_socket_mem));
+ if (launch_proc(argv5) == 0) {
+ printf("Error - process run ok with invalid "
"(mixed with invalid input with a numeric value as "
"last character) --socket-mem!\n");
- return -1;
+ return -1;
+ }
}
- if (launch_proc(argv6) == 0) {
- printf("Error - process run ok with invalid "
+ if (num_sockets > 2) {
+ populate_socket_mem_param(num_sockets - 2, "2", ",,2",
+ arg6_socket_mem, sizeof(arg6_socket_mem));
+ if (launch_proc(argv6) == 0) {
+ printf("Error - process run ok with invalid "
"(with empty socket) --socket-mem!\n");
- return -1;
+ return -1;
+ }
}
if (launch_proc(argv7) == 0) {
return -1;
}
+ populate_socket_mem_param(num_sockets, "2", "",
+ arg8_socket_mem, sizeof(arg8_socket_mem));
if (launch_proc(argv8) == 0) {
printf("Error - process run ok with --socket-mem and -m specified!\n");
return -1;
}
+ populate_socket_mem_param(num_sockets + 1, "2", "",
+ invalid_socket_mem, sizeof(invalid_socket_mem));
if (launch_proc(argv9) == 0) {
printf("Error - process run ok with extra socket in --socket-mem!\n");
return -1;
}
+ populate_socket_mem_param(num_sockets, "2", "",
+ valid_socket_mem, sizeof(valid_socket_mem));
if (launch_proc(argv10) != 0) {
printf("Error - process failed with valid --socket-mem!\n");
return -1;
return 0;
}
-int
+static int
test_eal_flags(void)
{
int ret = 0;
return ret;
}
- ret = test_missing_n_flag();
+ ret = test_master_lcore_flag();
+ if (ret < 0) {
+ printf("Error in test_master_lcore_flag()\n");
+ return ret;
+ }
+
+ ret = test_invalid_n_flag();
if (ret < 0) {
- printf("Error in test_missing_n_flag()\n");
+ printf("Error in test_invalid_n_flag()\n");
return ret;
}
return ret;
}
+#ifdef RTE_LIBRTE_PMD_RING
+ ret = test_invalid_vdev_flag();
+ if (ret < 0) {
+ printf("Error in test_invalid_vdev_flag()\n");
+ return ret;
+ }
+#endif
ret = test_invalid_r_flag();
if (ret < 0) {
printf("Error in test_invalid_r_flag()\n");
return ret;
}
-#ifdef RTE_LIBRTE_XEN_DOM0
- ret = test_dom0_misc_flags();
-#else
ret = test_misc_flags();
-#endif
if (ret < 0) {
printf("Error in test_misc_flags()");
return ret;
return ret;
}
-#else
-/* Baremetal version
- * Multiprocess not applicable, so just return 0 always
- */
-int
-test_eal_flags(void)
-{
- printf("Multi-process not possible for baremetal, cannot test EAL flags\n");
- return 0;
-}
-
-#endif
+REGISTER_TEST_COMMAND(eal_flags_autotest, test_eal_flags);
+
+/* subtests used in meson for CI */
+REGISTER_TEST_COMMAND(eal_flags_c_opt_autotest, test_missing_c_flag);
+REGISTER_TEST_COMMAND(eal_flags_master_opt_autotest, test_master_lcore_flag);
+REGISTER_TEST_COMMAND(eal_flags_n_opt_autotest, test_invalid_n_flag);
+REGISTER_TEST_COMMAND(eal_flags_hpet_autotest, test_no_hpet_flag);
+REGISTER_TEST_COMMAND(eal_flags_no_huge_autotest, test_no_huge_flag);
+REGISTER_TEST_COMMAND(eal_flags_w_opt_autotest, test_whitelist_flag);
+REGISTER_TEST_COMMAND(eal_flags_b_opt_autotest, test_invalid_b_flag);
+REGISTER_TEST_COMMAND(eal_flags_vdev_opt_autotest, test_invalid_vdev_flag);
+REGISTER_TEST_COMMAND(eal_flags_r_opt_autotest, test_invalid_r_flag);
+REGISTER_TEST_COMMAND(eal_flags_mem_autotest, test_memory_flags);
+REGISTER_TEST_COMMAND(eal_flags_file_prefix_autotest, test_file_prefix);
+REGISTER_TEST_COMMAND(eal_flags_misc_autotest, test_misc_flags);