-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2016-2017 Intel Corporation
*/
#include <getopt.h>
#include <unistd.h>
+#include <rte_cryptodev.h>
#include <rte_malloc.h>
#include "cperf_options.h"
+#define AES_BLOCK_SIZE 16
+#define DES_BLOCK_SIZE 8
+
struct name_id_map {
const char *name;
uint32_t id;
};
+static void
+usage(char *progname)
+{
+ printf("%s [EAL options] --\n"
+ " --silent: disable options dump\n"
+ " --ptest throughput / latency / verify / pmd-cycleount :"
+ " set test type\n"
+ " --pool_sz N: set the number of crypto ops/mbufs allocated\n"
+ " --total-ops N: set the number of total operations performed\n"
+ " --burst-sz N: set the number of packets per burst\n"
+ " --buffer-sz N: set the size of a single packet\n"
+ " --imix N: set the distribution of packet sizes\n"
+ " --segment-sz N: set the size of the segment to use\n"
+ " --desc-nb N: set number of descriptors for each crypto device\n"
+ " --devtype TYPE: set crypto device type to use\n"
+ " --optype cipher-only / auth-only / cipher-then-auth /\n"
+ " auth-then-cipher / aead : set operation type\n"
+ " --sessionless: enable session-less crypto operations\n"
+ " --out-of-place: enable out-of-place crypto operations\n"
+ " --test-file NAME: set the test vector file path\n"
+ " --test-name NAME: set specific test name section in test file\n"
+ " --cipher-algo ALGO: set cipher algorithm\n"
+ " --cipher-op encrypt / decrypt: set the cipher operation\n"
+ " --cipher-key-sz N: set the cipher key size\n"
+ " --cipher-iv-sz N: set the cipher IV size\n"
+ " --auth-algo ALGO: set auth algorithm\n"
+ " --auth-op generate / verify: set the auth operation\n"
+ " --auth-key-sz N: set the auth key size\n"
+ " --auth-iv-sz N: set the auth IV size\n"
+ " --aead-algo ALGO: set AEAD algorithm\n"
+ " --aead-op encrypt / decrypt: set the AEAD operation\n"
+ " --aead-key-sz N: set the AEAD key size\n"
+ " --aead-iv-sz N: set the AEAD IV size\n"
+ " --aead-aad-sz N: set the AEAD AAD size\n"
+ " --digest-sz N: set the digest size\n"
+ " --pmd-cyclecount-delay-ms N: set delay between enqueue\n"
+ " and dequeue in pmd-cyclecount benchmarking mode\n"
+ " --csv-friendly: enable test result output CSV friendly\n"
+ " -h: prints this help\n",
+ progname);
+}
+
static int
get_str_key_id_mapping(struct name_id_map *map, unsigned int map_len,
const char *str_key)
CPERF_TEST_TYPE_THROUGHPUT
},
{
- cperf_test_type_strs[CPERF_TEST_TYPE_CYCLECOUNT],
- CPERF_TEST_TYPE_CYCLECOUNT
+ cperf_test_type_strs[CPERF_TEST_TYPE_VERIFY],
+ CPERF_TEST_TYPE_VERIFY
},
{
cperf_test_type_strs[CPERF_TEST_TYPE_LATENCY],
CPERF_TEST_TYPE_LATENCY
+ },
+ {
+ cperf_test_type_strs[CPERF_TEST_TYPE_PMDCC],
+ CPERF_TEST_TYPE_PMDCC
}
};
return 0;
}
+static int
+parse_range(const char *arg, uint32_t *min, uint32_t *max, uint32_t *inc)
+{
+ char *token;
+ uint32_t number;
+
+ char *copy_arg = strdup(arg);
+
+ if (copy_arg == NULL)
+ return -1;
+
+ errno = 0;
+ token = strtok(copy_arg, ":");
+
+ /* Parse minimum value */
+ if (token != NULL) {
+ number = strtoul(token, NULL, 10);
+
+ if (errno == EINVAL || errno == ERANGE ||
+ number == 0)
+ goto err_range;
+
+ *min = number;
+ } else
+ goto err_range;
+
+ token = strtok(NULL, ":");
+
+ /* Parse increment value */
+ if (token != NULL) {
+ number = strtoul(token, NULL, 10);
+
+ if (errno == EINVAL || errno == ERANGE ||
+ number == 0)
+ goto err_range;
+
+ *inc = number;
+ } else
+ goto err_range;
+
+ token = strtok(NULL, ":");
+
+ /* Parse maximum value */
+ if (token != NULL) {
+ number = strtoul(token, NULL, 10);
+
+ if (errno == EINVAL || errno == ERANGE ||
+ number == 0 ||
+ number < *min)
+ goto err_range;
+
+ *max = number;
+ } else
+ goto err_range;
+
+ if (strtok(NULL, ":") != NULL)
+ goto err_range;
+
+ free(copy_arg);
+ return 0;
+
+err_range:
+ free(copy_arg);
+ return -1;
+}
+
+static int
+parse_list(const char *arg, uint32_t *list, uint32_t *min, uint32_t *max)
+{
+ char *token;
+ uint32_t number;
+ uint8_t count = 0;
+ uint32_t temp_min;
+ uint32_t temp_max;
+
+ char *copy_arg = strdup(arg);
+
+ if (copy_arg == NULL)
+ return -1;
+
+ errno = 0;
+ token = strtok(copy_arg, ",");
+
+ /* Parse first value */
+ if (token != NULL) {
+ number = strtoul(token, NULL, 10);
+
+ if (errno == EINVAL || errno == ERANGE ||
+ number == 0)
+ goto err_list;
+
+ list[count++] = number;
+ temp_min = number;
+ temp_max = number;
+ } else
+ goto err_list;
+
+ token = strtok(NULL, ",");
+
+ while (token != NULL) {
+ if (count == MAX_LIST) {
+ RTE_LOG(WARNING, USER1, "Using only the first %u sizes\n",
+ MAX_LIST);
+ break;
+ }
+
+ number = strtoul(token, NULL, 10);
+
+ if (errno == EINVAL || errno == ERANGE ||
+ number == 0)
+ goto err_list;
+
+ list[count++] = number;
+
+ if (number < temp_min)
+ temp_min = number;
+ if (number > temp_max)
+ temp_max = number;
+
+ token = strtok(NULL, ",");
+ }
+
+ if (min)
+ *min = temp_min;
+ if (max)
+ *max = temp_max;
+
+ free(copy_arg);
+ return count;
+
+err_list:
+ free(copy_arg);
+ return -1;
+}
+
static int
parse_total_ops(struct cperf_options *opts, const char *arg)
{
int ret = parse_uint32_t(&opts->total_ops, arg);
if (ret)
- RTE_LOG(ERR, USER1, "failed to parse total operations count");
+ RTE_LOG(ERR, USER1, "failed to parse total operations count\n");
+
+ if (opts->total_ops == 0) {
+ RTE_LOG(ERR, USER1,
+ "invalid total operations count number specified\n");
+ return -1;
+ }
return ret;
}
static int
parse_burst_sz(struct cperf_options *opts, const char *arg)
{
- int ret = parse_uint32_t(&opts->burst_sz, arg);
+ int ret;
+
+ /* Try parsing the argument as a range, if it fails, parse it as a list */
+ if (parse_range(arg, &opts->min_burst_size, &opts->max_burst_size,
+ &opts->inc_burst_size) < 0) {
+ ret = parse_list(arg, opts->burst_size_list,
+ &opts->min_burst_size,
+ &opts->max_burst_size);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1, "failed to parse burst size/s\n");
+ return -1;
+ }
+ opts->burst_size_count = ret;
+ }
- if (ret)
- RTE_LOG(ERR, USER1, "failed to parse burst size");
- return ret;
+ return 0;
}
static int
parse_buffer_sz(struct cperf_options *opts, const char *arg)
{
- uint32_t i, valid_buf_sz[] = {
- 32, 64, 128, 256, 384, 512, 768, 1024, 1280, 1536, 1792,
- 2048
- };
+ int ret;
+
+ /* Try parsing the argument as a range, if it fails, parse it as a list */
+ if (parse_range(arg, &opts->min_buffer_size, &opts->max_buffer_size,
+ &opts->inc_buffer_size) < 0) {
+ ret = parse_list(arg, opts->buffer_size_list,
+ &opts->min_buffer_size,
+ &opts->max_buffer_size);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1, "failed to parse buffer size/s\n");
+ return -1;
+ }
+ opts->buffer_size_count = ret;
+ }
- if (parse_uint32_t(&opts->buffer_sz, arg)) {
- RTE_LOG(ERR, USER1, "failed to parse buffer size");
+ return 0;
+}
+
+static int
+parse_segment_sz(struct cperf_options *opts, const char *arg)
+{
+ int ret = parse_uint32_t(&opts->segment_sz, arg);
+
+ if (ret) {
+ RTE_LOG(ERR, USER1, "failed to parse segment size\n");
return -1;
}
- for (i = 0; i < RTE_DIM(valid_buf_sz); i++)
- if (valid_buf_sz[i] == opts->buffer_sz)
- return 0;
+ if (opts->segment_sz == 0) {
+ RTE_LOG(ERR, USER1, "Segment size has to be bigger than 0\n");
+ return -1;
+ }
- RTE_LOG(ERR, USER1, "invalid buffer size specified");
- return -1;
+ return 0;
+}
+
+static int
+parse_imix(struct cperf_options *opts, const char *arg)
+{
+ int ret;
+
+ ret = parse_list(arg, opts->imix_distribution_list,
+ NULL, NULL);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1, "failed to parse imix distribution\n");
+ return -1;
+ }
+
+ opts->imix_distribution_count = ret;
+
+ if (opts->imix_distribution_count <= 1) {
+ RTE_LOG(ERR, USER1, "imix distribution should have "
+ "at least two entries\n");
+ return -1;
+ }
+
+ return 0;
}
static int
-parse_segments_nb(struct cperf_options *opts, const char *arg)
+parse_desc_nb(struct cperf_options *opts, const char *arg)
{
- int ret = parse_uint32_t(&opts->segments_nb, arg);
+ int ret = parse_uint32_t(&opts->nb_descriptors, arg);
if (ret) {
- RTE_LOG(ERR, USER1, "failed to parse segments number\n");
+ RTE_LOG(ERR, USER1, "failed to parse descriptors number\n");
return -1;
}
- if ((opts->segments_nb == 0) || (opts->segments_nb > 255)) {
- RTE_LOG(ERR, USER1, "invalid segments number specified\n");
+ if (opts->nb_descriptors == 0) {
+ RTE_LOG(ERR, USER1, "invalid descriptors number specified\n");
return -1;
}
if (strlen(arg) > (sizeof(opts->device_type) - 1))
return -1;
- strncpy(opts->device_type, arg, sizeof(opts->device_type));
+ strncpy(opts->device_type, arg, sizeof(opts->device_type) - 1);
+ *(opts->device_type + sizeof(opts->device_type) - 1) = '\0';
return 0;
}
return 0;
}
-static int
-parse_verify(struct cperf_options *opts,
- const char *arg __rte_unused)
-{
- opts->verify = 1;
-
- return 0;
-}
-
static int
parse_test_file(struct cperf_options *opts,
const char *arg)
static int
parse_cipher_algo(struct cperf_options *opts, const char *arg)
{
- struct name_id_map cipher_algo_namemap[] = {
- {
- rte_crypto_cipher_algorithm_strings
- [RTE_CRYPTO_CIPHER_3DES_CBC],
- RTE_CRYPTO_CIPHER_3DES_CBC
- },
- {
- rte_crypto_cipher_algorithm_strings
- [RTE_CRYPTO_CIPHER_3DES_ECB],
- RTE_CRYPTO_CIPHER_3DES_ECB
- },
- {
- rte_crypto_cipher_algorithm_strings
- [RTE_CRYPTO_CIPHER_3DES_CTR],
- RTE_CRYPTO_CIPHER_3DES_CTR
- },
- {
- rte_crypto_cipher_algorithm_strings
- [RTE_CRYPTO_CIPHER_AES_CBC],
- RTE_CRYPTO_CIPHER_AES_CBC
- },
- {
- rte_crypto_cipher_algorithm_strings
- [RTE_CRYPTO_CIPHER_AES_CCM],
- RTE_CRYPTO_CIPHER_AES_CCM
- },
- {
- rte_crypto_cipher_algorithm_strings
- [RTE_CRYPTO_CIPHER_AES_CTR],
- RTE_CRYPTO_CIPHER_AES_CTR
- },
- {
- rte_crypto_cipher_algorithm_strings
- [RTE_CRYPTO_CIPHER_AES_ECB],
- RTE_CRYPTO_CIPHER_AES_ECB
- },
- {
- rte_crypto_cipher_algorithm_strings
- [RTE_CRYPTO_CIPHER_AES_GCM],
- RTE_CRYPTO_CIPHER_AES_GCM
- },
- {
- rte_crypto_cipher_algorithm_strings
- [RTE_CRYPTO_CIPHER_AES_F8],
- RTE_CRYPTO_CIPHER_AES_F8
- },
- {
- rte_crypto_cipher_algorithm_strings
- [RTE_CRYPTO_CIPHER_AES_XTS],
- RTE_CRYPTO_CIPHER_AES_XTS
- },
- {
- rte_crypto_cipher_algorithm_strings
- [RTE_CRYPTO_CIPHER_ARC4],
- RTE_CRYPTO_CIPHER_ARC4
- },
- {
- rte_crypto_cipher_algorithm_strings
- [RTE_CRYPTO_CIPHER_NULL],
- RTE_CRYPTO_CIPHER_NULL
- },
- {
- rte_crypto_cipher_algorithm_strings
- [RTE_CRYPTO_CIPHER_KASUMI_F8],
- RTE_CRYPTO_CIPHER_KASUMI_F8
- },
- {
- rte_crypto_cipher_algorithm_strings
- [RTE_CRYPTO_CIPHER_SNOW3G_UEA2],
- RTE_CRYPTO_CIPHER_SNOW3G_UEA2
- },
- {
- rte_crypto_cipher_algorithm_strings
- [RTE_CRYPTO_CIPHER_ZUC_EEA3],
- RTE_CRYPTO_CIPHER_ZUC_EEA3
- },
- };
+ enum rte_crypto_cipher_algorithm cipher_algo;
- int id = get_str_key_id_mapping(cipher_algo_namemap,
- RTE_DIM(cipher_algo_namemap), arg);
- if (id < 0) {
+ if (rte_cryptodev_get_cipher_algo_enum(&cipher_algo, arg) < 0) {
RTE_LOG(ERR, USER1, "Invalid cipher algorithm specified\n");
return -1;
}
- opts->cipher_algo = (enum rte_crypto_cipher_algorithm)id;
+ opts->cipher_algo = cipher_algo;
return 0;
}
}
static int
-parse_auth_algo(struct cperf_options *opts, const char *arg) {
- struct name_id_map cipher_auth_namemap[] = {
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_AES_CBC_MAC],
- RTE_CRYPTO_AUTH_AES_CBC_MAC
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_AES_CCM],
- RTE_CRYPTO_AUTH_AES_CCM
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_AES_CMAC],
- RTE_CRYPTO_AUTH_AES_CMAC
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_AES_GCM],
- RTE_CRYPTO_AUTH_AES_GCM
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_AES_GMAC],
- RTE_CRYPTO_AUTH_AES_GMAC
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_AES_XCBC_MAC],
- RTE_CRYPTO_AUTH_AES_XCBC_MAC
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_MD5],
- RTE_CRYPTO_AUTH_MD5
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_MD5_HMAC],
- RTE_CRYPTO_AUTH_MD5_HMAC
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_SHA1],
- RTE_CRYPTO_AUTH_SHA1
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_SHA1_HMAC],
- RTE_CRYPTO_AUTH_SHA1_HMAC
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_SHA224],
- RTE_CRYPTO_AUTH_SHA224
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_SHA224_HMAC],
- RTE_CRYPTO_AUTH_SHA224_HMAC
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_SHA256],
- RTE_CRYPTO_AUTH_SHA256
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_SHA256_HMAC],
- RTE_CRYPTO_AUTH_SHA256_HMAC
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_SHA384],
- RTE_CRYPTO_AUTH_SHA384
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_SHA384_HMAC],
- RTE_CRYPTO_AUTH_SHA384_HMAC
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_SHA512],
- RTE_CRYPTO_AUTH_SHA512
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_SHA512_HMAC],
- RTE_CRYPTO_AUTH_SHA512_HMAC
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_KASUMI_F9],
- RTE_CRYPTO_AUTH_KASUMI_F9
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_SNOW3G_UIA2],
- RTE_CRYPTO_AUTH_SNOW3G_UIA2
- },
- {
- rte_crypto_auth_algorithm_strings
- [RTE_CRYPTO_AUTH_ZUC_EIA3],
- RTE_CRYPTO_AUTH_ZUC_EIA3
- },
- };
-
+parse_auth_algo(struct cperf_options *opts, const char *arg)
+{
+ enum rte_crypto_auth_algorithm auth_algo;
- int id = get_str_key_id_mapping(cipher_auth_namemap,
- RTE_DIM(cipher_auth_namemap), arg);
- if (id < 0) {
- RTE_LOG(ERR, USER1, "invalid authentication algorithm specified"
- "\n");
+ if (rte_cryptodev_get_auth_algo_enum(&auth_algo, arg) < 0) {
+ RTE_LOG(ERR, USER1, "Invalid authentication algorithm specified\n");
return -1;
}
- opts->auth_algo = (enum rte_crypto_auth_algorithm)id;
+ opts->auth_algo = auth_algo;
return 0;
}
}
static int
-parse_auth_digest_sz(struct cperf_options *opts, const char *arg)
+parse_digest_sz(struct cperf_options *opts, const char *arg)
+{
+ return parse_uint16_t(&opts->digest_sz, arg);
+}
+
+static int
+parse_auth_iv_sz(struct cperf_options *opts, const char *arg)
{
- return parse_uint16_t(&opts->auth_digest_sz, arg);
+ return parse_uint16_t(&opts->auth_iv_sz, arg);
+}
+
+static int
+parse_aead_algo(struct cperf_options *opts, const char *arg)
+{
+ enum rte_crypto_aead_algorithm aead_algo;
+
+ if (rte_cryptodev_get_aead_algo_enum(&aead_algo, arg) < 0) {
+ RTE_LOG(ERR, USER1, "Invalid AEAD algorithm specified\n");
+ return -1;
+ }
+
+ opts->aead_algo = aead_algo;
+
+ return 0;
}
static int
-parse_auth_aad_sz(struct cperf_options *opts, const char *arg)
+parse_aead_op(struct cperf_options *opts, const char *arg)
{
- return parse_uint16_t(&opts->auth_aad_sz, arg);
+ struct name_id_map aead_op_namemap[] = {
+ {
+ rte_crypto_aead_operation_strings
+ [RTE_CRYPTO_AEAD_OP_ENCRYPT],
+ RTE_CRYPTO_AEAD_OP_ENCRYPT },
+ {
+ rte_crypto_aead_operation_strings
+ [RTE_CRYPTO_AEAD_OP_DECRYPT],
+ RTE_CRYPTO_AEAD_OP_DECRYPT
+ }
+ };
+
+ int id = get_str_key_id_mapping(aead_op_namemap,
+ RTE_DIM(aead_op_namemap), arg);
+ if (id < 0) {
+ RTE_LOG(ERR, USER1, "invalid AEAD operation specified"
+ "\n");
+ return -1;
+ }
+
+ opts->aead_op = (enum rte_crypto_aead_operation)id;
+
+ return 0;
+}
+
+static int
+parse_aead_key_sz(struct cperf_options *opts, const char *arg)
+{
+ return parse_uint16_t(&opts->aead_key_sz, arg);
+}
+
+static int
+parse_aead_iv_sz(struct cperf_options *opts, const char *arg)
+{
+ return parse_uint16_t(&opts->aead_iv_sz, arg);
+}
+
+static int
+parse_aead_aad_sz(struct cperf_options *opts, const char *arg)
+{
+ return parse_uint16_t(&opts->aead_aad_sz, arg);
}
static int
return 0;
}
+static int
+parse_pmd_cyclecount_delay_ms(struct cperf_options *opts,
+ const char *arg)
+{
+ int ret = parse_uint32_t(&opts->pmdcc_delay, arg);
+
+ if (ret) {
+ RTE_LOG(ERR, USER1, "failed to parse pmd-cyclecount delay\n");
+ return -1;
+ }
+
+ return 0;
+}
+
typedef int (*option_parser_t)(struct cperf_options *opts,
const char *arg);
{ CPERF_TOTAL_OPS, required_argument, 0, 0 },
{ CPERF_BURST_SIZE, required_argument, 0, 0 },
{ CPERF_BUFFER_SIZE, required_argument, 0, 0 },
- { CPERF_SEGMENTS_NB, required_argument, 0, 0 },
+ { CPERF_SEGMENT_SIZE, required_argument, 0, 0 },
+ { CPERF_DESC_NB, required_argument, 0, 0 },
+ { CPERF_IMIX, required_argument, 0, 0 },
{ CPERF_DEVTYPE, required_argument, 0, 0 },
{ CPERF_OPTYPE, required_argument, 0, 0 },
{ CPERF_SILENT, no_argument, 0, 0 },
{ CPERF_SESSIONLESS, no_argument, 0, 0 },
{ CPERF_OUT_OF_PLACE, no_argument, 0, 0 },
- { CPERF_VERIFY, no_argument, 0, 0 },
{ CPERF_TEST_FILE, required_argument, 0, 0 },
{ CPERF_TEST_NAME, required_argument, 0, 0 },
{ CPERF_AUTH_OP, required_argument, 0, 0 },
{ CPERF_AUTH_KEY_SZ, required_argument, 0, 0 },
- { CPERF_AUTH_DIGEST_SZ, required_argument, 0, 0 },
- { CPERF_AUTH_AAD_SZ, required_argument, 0, 0 },
+ { CPERF_AUTH_IV_SZ, required_argument, 0, 0 },
+
+ { CPERF_AEAD_ALGO, required_argument, 0, 0 },
+ { CPERF_AEAD_OP, required_argument, 0, 0 },
+
+ { CPERF_AEAD_KEY_SZ, required_argument, 0, 0 },
+ { CPERF_AEAD_AAD_SZ, required_argument, 0, 0 },
+ { CPERF_AEAD_IV_SZ, required_argument, 0, 0 },
+
+ { CPERF_DIGEST_SZ, required_argument, 0, 0 },
+
{ CPERF_CSV, no_argument, 0, 0},
+ { CPERF_PMDCC_DELAY_MS, required_argument, 0, 0 },
+
{ NULL, 0, 0, 0 }
};
opts->pool_sz = 8192;
opts->total_ops = 10000000;
- opts->burst_sz = 32;
- opts->buffer_sz = 64;
- opts->segments_nb = 1;
-
+ opts->nb_descriptors = 2048;
+
+ opts->buffer_size_list[0] = 64;
+ opts->buffer_size_count = 1;
+ opts->max_buffer_size = 64;
+ opts->min_buffer_size = 64;
+ opts->inc_buffer_size = 0;
+
+ opts->burst_size_list[0] = 32;
+ opts->burst_size_count = 1;
+ opts->max_burst_size = 32;
+ opts->min_burst_size = 32;
+ opts->inc_burst_size = 0;
+
+ /*
+ * Will be parsed from command line or set to
+ * maximum buffer size + digest, later
+ */
+ opts->segment_sz = 0;
+
+ opts->imix_distribution_count = 0;
strncpy(opts->device_type, "crypto_aesni_mb",
sizeof(opts->device_type));
+ opts->nb_qps = 1;
opts->op_type = CPERF_CIPHER_THEN_AUTH;
opts->silent = 0;
- opts->verify = 0;
opts->test_file = NULL;
opts->test_name = NULL;
opts->sessionless = 0;
opts->auth_op = RTE_CRYPTO_AUTH_OP_GENERATE;
opts->auth_key_sz = 64;
- opts->auth_digest_sz = 12;
- opts->auth_aad_sz = 0;
+ opts->auth_iv_sz = 0;
+
+ opts->aead_key_sz = 0;
+ opts->aead_iv_sz = 0;
+ opts->aead_aad_sz = 0;
+
+ opts->digest_sz = 12;
+
+ opts->pmdcc_delay = 0;
}
static int
{ CPERF_TOTAL_OPS, parse_total_ops },
{ CPERF_BURST_SIZE, parse_burst_sz },
{ CPERF_BUFFER_SIZE, parse_buffer_sz },
- { CPERF_SEGMENTS_NB, parse_segments_nb },
+ { CPERF_SEGMENT_SIZE, parse_segment_sz },
+ { CPERF_DESC_NB, parse_desc_nb },
{ CPERF_DEVTYPE, parse_device_type },
{ CPERF_OPTYPE, parse_op_type },
{ CPERF_SESSIONLESS, parse_sessionless },
{ CPERF_OUT_OF_PLACE, parse_out_of_place },
- { CPERF_VERIFY, parse_verify },
+ { CPERF_IMIX, parse_imix },
{ CPERF_TEST_FILE, parse_test_file },
{ CPERF_TEST_NAME, parse_test_name },
{ CPERF_CIPHER_ALGO, parse_cipher_algo },
{ CPERF_AUTH_ALGO, parse_auth_algo },
{ CPERF_AUTH_OP, parse_auth_op },
{ CPERF_AUTH_KEY_SZ, parse_auth_key_sz },
- { CPERF_AUTH_DIGEST_SZ, parse_auth_digest_sz },
- { CPERF_AUTH_AAD_SZ, parse_auth_aad_sz },
- { CPERF_CSV, parse_csv_friendly},
+ { CPERF_AUTH_IV_SZ, parse_auth_iv_sz },
+ { CPERF_AEAD_ALGO, parse_aead_algo },
+ { CPERF_AEAD_OP, parse_aead_op },
+ { CPERF_AEAD_KEY_SZ, parse_aead_key_sz },
+ { CPERF_AEAD_IV_SZ, parse_aead_iv_sz },
+ { CPERF_AEAD_AAD_SZ, parse_aead_aad_sz },
+ { CPERF_DIGEST_SZ, parse_digest_sz },
+ { CPERF_CSV, parse_csv_friendly},
+ { CPERF_PMDCC_DELAY_MS, parse_pmd_cyclecount_delay_ms},
};
unsigned int i;
{
int opt, retval, opt_idx;
- while ((opt = getopt_long(argc, argv, "", lgopts, &opt_idx)) != EOF) {
+ while ((opt = getopt_long(argc, argv, "h", lgopts, &opt_idx)) != EOF) {
switch (opt) {
+ case 'h':
+ usage(argv[0]);
+ rte_exit(EXIT_SUCCESS, "Displayed help\n");
+ break;
/* long options */
case 0:
-
retval = cperf_opts_parse_long(opt_idx, options);
if (retval != 0)
return retval;
break;
default:
+ usage(argv[0]);
return -EINVAL;
}
}
return 0;
}
+static int
+check_cipher_buffer_length(struct cperf_options *options)
+{
+ uint32_t buffer_size, buffer_size_idx = 0;
+
+ if (options->cipher_algo == RTE_CRYPTO_CIPHER_AES_CBC ||
+ options->cipher_algo == RTE_CRYPTO_CIPHER_AES_ECB) {
+ if (options->inc_buffer_size != 0)
+ buffer_size = options->min_buffer_size;
+ else
+ buffer_size = options->buffer_size_list[0];
+
+ while (buffer_size <= options->max_buffer_size) {
+ if ((buffer_size % AES_BLOCK_SIZE) != 0) {
+ RTE_LOG(ERR, USER1, "Some of the buffer sizes are "
+ "not suitable for the algorithm selected\n");
+ return -EINVAL;
+ }
+
+ if (options->inc_buffer_size != 0)
+ buffer_size += options->inc_buffer_size;
+ else {
+ if (++buffer_size_idx == options->buffer_size_count)
+ break;
+ buffer_size = options->buffer_size_list[buffer_size_idx];
+ }
+
+ }
+ }
+
+ if (options->cipher_algo == RTE_CRYPTO_CIPHER_DES_CBC ||
+ options->cipher_algo == RTE_CRYPTO_CIPHER_3DES_CBC ||
+ options->cipher_algo == RTE_CRYPTO_CIPHER_3DES_ECB) {
+ if (options->inc_buffer_size != 0)
+ buffer_size = options->min_buffer_size;
+ else
+ buffer_size = options->buffer_size_list[0];
+
+ while (buffer_size <= options->max_buffer_size) {
+ if ((buffer_size % DES_BLOCK_SIZE) != 0) {
+ RTE_LOG(ERR, USER1, "Some of the buffer sizes are "
+ "not suitable for the algorithm selected\n");
+ return -EINVAL;
+ }
+
+ if (options->inc_buffer_size != 0)
+ buffer_size += options->inc_buffer_size;
+ else {
+ if (++buffer_size_idx == options->buffer_size_count)
+ break;
+ buffer_size = options->buffer_size_list[buffer_size_idx];
+ }
+
+ }
+ }
+
+ return 0;
+}
+
int
cperf_options_check(struct cperf_options *options)
{
- if (options->segments_nb > options->buffer_sz) {
+ if (options->op_type == CPERF_CIPHER_ONLY)
+ options->digest_sz = 0;
+
+ /*
+ * If segment size is not set, assume only one segment,
+ * big enough to contain the largest buffer and the digest
+ */
+ if (options->segment_sz == 0)
+ options->segment_sz = options->max_buffer_size +
+ options->digest_sz;
+
+ if (options->segment_sz < options->digest_sz) {
RTE_LOG(ERR, USER1,
- "Segments number greater than buffer size.\n");
+ "Segment size should be at least "
+ "the size of the digest\n");
return -EINVAL;
}
- if (options->verify && options->test_file == NULL) {
+ if ((options->imix_distribution_count != 0) &&
+ (options->imix_distribution_count !=
+ options->buffer_size_count)) {
+ RTE_LOG(ERR, USER1, "IMIX distribution must have the same "
+ "number of buffer sizes\n");
+ return -EINVAL;
+ }
+
+ if (options->test == CPERF_TEST_TYPE_VERIFY &&
+ options->test_file == NULL) {
RTE_LOG(ERR, USER1, "Define path to the file with test"
" vectors.\n");
return -EINVAL;
}
+ if (options->test == CPERF_TEST_TYPE_VERIFY &&
+ options->op_type != CPERF_CIPHER_ONLY &&
+ options->test_name == NULL) {
+ RTE_LOG(ERR, USER1, "Define test name to get the correct digest"
+ " from the test vectors.\n");
+ return -EINVAL;
+ }
+
if (options->test_name != NULL && options->test_file == NULL) {
RTE_LOG(ERR, USER1, "Define path to the file with test"
" vectors.\n");
return -EINVAL;
}
- if (options->verify &&
- options->total_ops > options->pool_sz) {
- RTE_LOG(ERR, USER1, "Total number of ops must be less than or"
- " equal to the pool size.\n");
+ if (options->test == CPERF_TEST_TYPE_VERIFY &&
+ (options->inc_buffer_size != 0 ||
+ options->buffer_size_count > 1)) {
+ RTE_LOG(ERR, USER1, "Only one buffer size is allowed when "
+ "using the verify test.\n");
+ return -EINVAL;
+ }
+
+ if (options->test == CPERF_TEST_TYPE_VERIFY &&
+ (options->inc_burst_size != 0 ||
+ options->burst_size_count > 1)) {
+ RTE_LOG(ERR, USER1, "Only one burst size is allowed when "
+ "using the verify test.\n");
+ return -EINVAL;
+ }
+
+ if (options->test == CPERF_TEST_TYPE_PMDCC &&
+ options->pool_sz < options->nb_descriptors) {
+ RTE_LOG(ERR, USER1, "For pmd cyclecount benchmarks, pool size "
+ "must be equal or greater than the number of "
+ "cryptodev descriptors.\n");
+ return -EINVAL;
+ }
+
+ if (options->test == CPERF_TEST_TYPE_VERIFY &&
+ options->imix_distribution_count > 0) {
+ RTE_LOG(ERR, USER1, "IMIX is not allowed when "
+ "using the verify test.\n");
return -EINVAL;
}
" options: decrypt and verify.\n");
return -EINVAL;
}
- } else if (options->op_type == CPERF_AEAD) {
- if (!(options->cipher_op == RTE_CRYPTO_CIPHER_OP_ENCRYPT &&
- options->auth_op ==
- RTE_CRYPTO_AUTH_OP_GENERATE) &&
- !(options->cipher_op ==
- RTE_CRYPTO_CIPHER_OP_DECRYPT &&
- options->auth_op ==
- RTE_CRYPTO_AUTH_OP_VERIFY)) {
- RTE_LOG(ERR, USER1, "Use together options: encrypt and"
- " generate or decrypt and verify.\n");
+ }
+
+ if (options->op_type == CPERF_CIPHER_ONLY ||
+ options->op_type == CPERF_CIPHER_THEN_AUTH ||
+ options->op_type == CPERF_AUTH_THEN_CIPHER) {
+ if (check_cipher_buffer_length(options) < 0)
return -EINVAL;
- }
}
return 0;
void
cperf_options_dump(struct cperf_options *opts)
{
+ uint8_t size_idx;
+
printf("# Crypto Performance Application Options:\n");
printf("#\n");
printf("# cperf test: %s\n", cperf_test_type_strs[opts->test]);
printf("#\n");
printf("# size of crypto op / mbuf pool: %u\n", opts->pool_sz);
printf("# total number of ops: %u\n", opts->total_ops);
- printf("# burst size: %u\n", opts->burst_sz);
- printf("# buffer size: %u\n", opts->buffer_sz);
- printf("# segments per buffer: %u\n", opts->segments_nb);
+ if (opts->inc_buffer_size != 0) {
+ printf("# buffer size:\n");
+ printf("#\t min: %u\n", opts->min_buffer_size);
+ printf("#\t max: %u\n", opts->max_buffer_size);
+ printf("#\t inc: %u\n", opts->inc_buffer_size);
+ } else {
+ printf("# buffer sizes: ");
+ for (size_idx = 0; size_idx < opts->buffer_size_count; size_idx++)
+ printf("%u ", opts->buffer_size_list[size_idx]);
+ printf("\n");
+ }
+ if (opts->inc_burst_size != 0) {
+ printf("# burst size:\n");
+ printf("#\t min: %u\n", opts->min_burst_size);
+ printf("#\t max: %u\n", opts->max_burst_size);
+ printf("#\t inc: %u\n", opts->inc_burst_size);
+ } else {
+ printf("# burst sizes: ");
+ for (size_idx = 0; size_idx < opts->burst_size_count; size_idx++)
+ printf("%u ", opts->burst_size_list[size_idx]);
+ printf("\n");
+ }
+ printf("\n# segment size: %u\n", opts->segment_sz);
printf("#\n");
printf("# cryptodev type: %s\n", opts->device_type);
printf("#\n");
+ printf("# number of queue pairs per device: %u\n", opts->nb_qps);
printf("# crypto operation: %s\n", cperf_op_type_strs[opts->op_type]);
- printf("# verify operation: %s\n", opts->verify ? "yes" : "no");
printf("# sessionless: %s\n", opts->sessionless ? "yes" : "no");
printf("# out of place: %s\n", opts->out_of_place ? "yes" : "no");
+ if (opts->test == CPERF_TEST_TYPE_PMDCC)
+ printf("# inter-burst delay: %u ms\n", opts->pmdcc_delay);
printf("#\n");
if (opts->op_type == CPERF_AUTH_ONLY ||
opts->op_type == CPERF_CIPHER_THEN_AUTH ||
- opts->op_type == CPERF_AUTH_THEN_CIPHER ||
- opts->op_type == CPERF_AEAD) {
+ opts->op_type == CPERF_AUTH_THEN_CIPHER) {
printf("# auth algorithm: %s\n",
rte_crypto_auth_algorithm_strings[opts->auth_algo]);
printf("# auth operation: %s\n",
rte_crypto_auth_operation_strings[opts->auth_op]);
printf("# auth key size: %u\n", opts->auth_key_sz);
- printf("# auth digest size: %u\n", opts->auth_digest_sz);
- printf("# auth aad size: %u\n", opts->auth_aad_sz);
+ printf("# auth iv size: %u\n", opts->auth_iv_sz);
+ printf("# auth digest size: %u\n", opts->digest_sz);
printf("#\n");
}
if (opts->op_type == CPERF_CIPHER_ONLY ||
opts->op_type == CPERF_CIPHER_THEN_AUTH ||
- opts->op_type == CPERF_AUTH_THEN_CIPHER ||
- opts->op_type == CPERF_AEAD) {
+ opts->op_type == CPERF_AUTH_THEN_CIPHER) {
printf("# cipher algorithm: %s\n",
rte_crypto_cipher_algorithm_strings[opts->cipher_algo]);
printf("# cipher operation: %s\n",
printf("# cipher iv size: %u\n", opts->cipher_iv_sz);
printf("#\n");
}
+
+ if (opts->op_type == CPERF_AEAD) {
+ printf("# aead algorithm: %s\n",
+ rte_crypto_aead_algorithm_strings[opts->aead_algo]);
+ printf("# aead operation: %s\n",
+ rte_crypto_aead_operation_strings[opts->aead_op]);
+ printf("# aead key size: %u\n", opts->aead_key_sz);
+ printf("# aead iv size: %u\n", opts->aead_iv_sz);
+ printf("# aead digest size: %u\n", opts->digest_sz);
+ printf("# aead aad size: %u\n", opts->aead_aad_sz);
+ printf("#\n");
+ }
}