#include <cmdline_socket.h>
#include <cmdline.h>
#include <rte_pci_dev_ids.h>
+#ifdef RTE_LIBRTE_PMD_BOND
+#include <rte_eth_bond.h>
+#endif
#include "testpmd.h"
"Display:\n"
"--------\n\n"
- "show port (info|stats|fdir|stat_qmap) (port_id|all)\n"
+ "show port (info|stats|xstats|fdir|stat_qmap) (port_id|all)\n"
" Display information for port_id, or all.\n\n"
"show port rss-hash [key]\n"
" Display the RSS hash functions and RSS hash key"
" of port X\n\n"
- "clear port (info|stats|fdir|stat_qmap) (port_id|all)\n"
+ "clear port (info|stats|xstats|fdir|stat_qmap) (port_id|all)\n"
" Clear information for port_id, or all.\n\n"
"show config (rxtx|cores|fwd)\n"
"set flow_ctrl rx (on|off) tx (on|off) (high_water)"
" (low_water) (pause_time) (send_xon) mac_ctrl_frame_fwd"
" (on|off) autoneg (on|off) (port_id)\n"
+ "set flow_ctrl rx (on|off) (portid)\n"
+ "set flow_ctrl tx (on|off) (portid)\n"
+ "set flow_ctrl high_water (high_water) (portid)\n"
+ "set flow_ctrl low_water (low_water) (portid)\n"
+ "set flow_ctrl pause_time (pause_time) (portid)\n"
+ "set flow_ctrl send_xon (send_xon) (portid)\n"
+ "set flow_ctrl mac_ctrl_frame_fwd (on|off) (portid)\n"
+ "set flow_ctrl autoneg (on|off) (port_id)\n"
" Set the link flow control parameter on a port.\n\n"
"set pfc_ctrl rx (on|off) tx (on|off) (high_water)"
" Show the bypass configuration for a bypass enabled NIC"
" using the lowest port on the NIC.\n\n"
#endif
+#ifdef RTE_LIBRTE_PMD_BOND
+ "create bonded device (mode) (socket)\n"
+ " Create a new bonded device with specific bonding mode and socket.\n\n"
+
+ "add bonding slave (slave_id) (port_id)\n"
+ " Add a slave device to a bonded device.\n\n"
+
+ "remove bonding slave (slave_id) (port_id)\n"
+ " Remove a slave device from a bonded device.\n\n"
+
+ "set bonding mode (value) (port_id)\n"
+ " Set the bonding mode on a bonded device.\n\n"
+
+ "set bonding primary (slave_id) (port_id)\n"
+ " Set the primary slave for a bonded device.\n\n"
+
+ "show bonding config (port_id)\n"
+ " Show the bonding config for port_id.\n\n"
+
+ "set bonding mac_addr (port_id) (address)\n"
+ " Set the MAC address of a bonded device.\n\n"
+
+ "set bonding xmit_balance_policy (port_id) (l2|l23|l34)\n"
+ " Set the transmit balance policy for bonded device running in balance mode.\n\n"
+#endif
, list_pkt_forwarding_modes()
);
"port close (port_id|all)\n"
" Close all ports or port_id.\n\n"
- "port config (port_id|all) speed (10|100|1000|10000|auto)"
+ "port config (port_id|all)"
+ " speed (10|100|1000|10000|40000|auto)"
" duplex (half|full|auto)\n"
" Set speed and duplex for all ports or port_id\n\n"
" tx rs bit threshold.\n\n"
"port config mtu X value\n"
" Set the MTU of port X to a given value\n\n"
+
+ "port (port_id) (rxq|txq) (queue_id) (start|stop)\n"
+ " Start/stop a rx/tx queue of port X. Only take effect"
+ " when port X is started\n"
);
}
else if (!strcmp(res->value1, "1000"))
link_speed = ETH_LINK_SPEED_1000;
else if (!strcmp(res->value1, "10000"))
- link_speed = ETH_LINK_SPEED_10000;
+ link_speed = ETH_LINK_SPEED_10G;
+ else if (!strcmp(res->value1, "40000"))
+ link_speed = ETH_LINK_SPEED_40G;
else if (!strcmp(res->value1, "auto"))
link_speed = ETH_LINK_SPEED_AUTONEG;
else {
TOKEN_STRING_INITIALIZER(struct cmd_config_speed_all, item1, "speed");
cmdline_parse_token_string_t cmd_config_speed_all_value1 =
TOKEN_STRING_INITIALIZER(struct cmd_config_speed_all, value1,
- "10#100#1000#10000#auto");
+ "10#100#1000#10000#40000#auto");
cmdline_parse_token_string_t cmd_config_speed_all_item2 =
TOKEN_STRING_INITIALIZER(struct cmd_config_speed_all, item2, "duplex");
cmdline_parse_token_string_t cmd_config_speed_all_value2 =
cmdline_parse_inst_t cmd_config_speed_all = {
.f = cmd_config_speed_all_parsed,
.data = NULL,
- .help_str = "port config all speed 10|100|1000|10000|auto duplex "
+ .help_str = "port config all speed 10|100|1000|10000|40000|auto duplex "
"half|full|auto",
.tokens = {
(void *)&cmd_config_speed_all_port,
link_speed = ETH_LINK_SPEED_1000;
else if (!strcmp(res->value1, "10000"))
link_speed = ETH_LINK_SPEED_10000;
+ else if (!strcmp(res->value1, "40000"))
+ link_speed = ETH_LINK_SPEED_40G;
else if (!strcmp(res->value1, "auto"))
link_speed = ETH_LINK_SPEED_AUTONEG;
else {
"speed");
cmdline_parse_token_string_t cmd_config_speed_specific_value1 =
TOKEN_STRING_INITIALIZER(struct cmd_config_speed_specific, value1,
- "10#100#1000#10000#auto");
+ "10#100#1000#10000#40000#auto");
cmdline_parse_token_string_t cmd_config_speed_specific_item2 =
TOKEN_STRING_INITIALIZER(struct cmd_config_speed_specific, item2,
"duplex");
cmdline_parse_inst_t cmd_config_speed_specific = {
.f = cmd_config_speed_specific_parsed,
.data = NULL,
- .help_str = "port config X speed 10|100|1000|10000|auto duplex "
+ .help_str = "port config X speed 10|100|1000|10000|40000|auto duplex "
"half|full|auto",
.tokens = {
(void *)&cmd_config_speed_specific_port,
},
};
+/* *** configure port rxq/txq start/stop *** */
+struct cmd_config_rxtx_queue {
+ cmdline_fixed_string_t port;
+ uint8_t portid;
+ cmdline_fixed_string_t rxtxq;
+ uint16_t qid;
+ cmdline_fixed_string_t opname;
+};
+
+static void
+cmd_config_rxtx_queue_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_config_rxtx_queue *res = parsed_result;
+ uint8_t isrx;
+ uint8_t isstart;
+
+ if (test_done == 0) {
+ printf("Please stop forwarding first\n");
+ return;
+ }
+
+ if (port_id_is_invalid(res->portid))
+ return;
+
+ if (port_is_started(res->portid) != 1) {
+ printf("Please start port %u first\n", res->portid);
+ return;
+ }
+
+ if (!strcmp(res->rxtxq, "rxq"))
+ isrx = 1;
+ else if (!strcmp(res->rxtxq, "txq"))
+ isrx = 0;
+ else {
+ printf("Unknown parameter\n");
+ return;
+ }
+
+ if (isrx && rx_queue_id_is_invalid(res->qid))
+ return;
+ else if (!isrx && tx_queue_id_is_invalid(res->qid))
+ return;
+
+ if (!strcmp(res->opname, "start"))
+ isstart = 1;
+ else if (!strcmp(res->opname, "stop"))
+ isstart = 0;
+ else {
+ printf("Unknown parameter\n");
+ return;
+ }
+
+ if (isstart && isrx)
+ rte_eth_dev_rx_queue_start(res->portid, res->qid);
+ else if (!isstart && isrx)
+ rte_eth_dev_rx_queue_stop(res->portid, res->qid);
+ else if (isstart && !isrx)
+ rte_eth_dev_tx_queue_start(res->portid, res->qid);
+ else
+ rte_eth_dev_tx_queue_stop(res->portid, res->qid);
+}
+
+cmdline_parse_token_string_t cmd_config_rxtx_queue_port =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_rxtx_queue, port, "port");
+cmdline_parse_token_num_t cmd_config_rxtx_queue_portid =
+ TOKEN_NUM_INITIALIZER(struct cmd_config_rxtx_queue, portid, UINT8);
+cmdline_parse_token_string_t cmd_config_rxtx_queue_rxtxq =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_rxtx_queue, rxtxq, "rxq#txq");
+cmdline_parse_token_num_t cmd_config_rxtx_queue_qid =
+ TOKEN_NUM_INITIALIZER(struct cmd_config_rxtx_queue, qid, UINT16);
+cmdline_parse_token_string_t cmd_config_rxtx_queue_opname =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_rxtx_queue, opname,
+ "start#stop");
+
+cmdline_parse_inst_t cmd_config_rxtx_queue = {
+ .f = cmd_config_rxtx_queue_parsed,
+ .data = NULL,
+ .help_str = "port X rxq|txq ID start|stop",
+ .tokens = {
+ (void *)&cmd_config_speed_all_port,
+ (void *)&cmd_config_rxtx_queue_portid,
+ (void *)&cmd_config_rxtx_queue_rxtxq,
+ (void *)&cmd_config_rxtx_queue_qid,
+ (void *)&cmd_config_rxtx_queue_opname,
+ NULL,
+ },
+};
+
/* *** Configure RSS RETA *** */
struct cmd_config_rss_reta {
cmdline_fixed_string_t port;
};
#endif
+#ifdef RTE_LIBRTE_PMD_BOND
+/* *** SET BONDING MODE *** */
+struct cmd_set_bonding_mode_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t bonding;
+ cmdline_fixed_string_t mode;
+ uint8_t value;
+ uint8_t port_id;
+};
+
+static void cmd_set_bonding_mode_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_set_bonding_mode_result *res = parsed_result;
+ portid_t port_id = res->port_id;
+
+ /* Set the bonding mode for the relevant port. */
+ if (0 != rte_eth_bond_mode_set(port_id, res->value))
+ printf("\t Failed to set bonding mode for port = %d.\n", port_id);
+}
+
+cmdline_parse_token_string_t cmd_setbonding_mode_set =
+TOKEN_STRING_INITIALIZER(struct cmd_set_bonding_mode_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_setbonding_mode_bonding =
+TOKEN_STRING_INITIALIZER(struct cmd_set_bonding_mode_result,
+ bonding, "bonding");
+cmdline_parse_token_string_t cmd_setbonding_mode_mode =
+TOKEN_STRING_INITIALIZER(struct cmd_set_bonding_mode_result,
+ mode, "mode");
+cmdline_parse_token_num_t cmd_setbonding_mode_value =
+TOKEN_NUM_INITIALIZER(struct cmd_set_bonding_mode_result,
+ value, UINT8);
+cmdline_parse_token_num_t cmd_setbonding_mode_port =
+TOKEN_NUM_INITIALIZER(struct cmd_set_bonding_mode_result,
+ port_id, UINT8);
+
+cmdline_parse_inst_t cmd_set_bonding_mode = {
+ .f = cmd_set_bonding_mode_parsed,
+ .help_str = "set bonding mode (mode_value) (port_id): Set the bonding mode for port_id",
+ .data = NULL,
+ .tokens = {
+ (void *) &cmd_setbonding_mode_set,
+ (void *) &cmd_setbonding_mode_bonding,
+ (void *) &cmd_setbonding_mode_mode,
+ (void *) &cmd_setbonding_mode_value,
+ (void *) &cmd_setbonding_mode_port,
+ NULL
+ }
+};
+
+/* *** SET BALANCE XMIT POLICY *** */
+struct cmd_set_bonding_balance_xmit_policy_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t bonding;
+ cmdline_fixed_string_t balance_xmit_policy;
+ uint8_t port_id;
+ cmdline_fixed_string_t policy;
+};
+
+static void cmd_set_bonding_balance_xmit_policy_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_set_bonding_balance_xmit_policy_result *res = parsed_result;
+ portid_t port_id = res->port_id;
+ uint8_t policy;
+
+ if (!strcmp(res->policy, "l2")) {
+ policy = BALANCE_XMIT_POLICY_LAYER2;
+ } else if (!strcmp(res->policy, "l23")) {
+ policy = BALANCE_XMIT_POLICY_LAYER23;
+ } else if (!strcmp(res->policy, "l34")) {
+ policy = BALANCE_XMIT_POLICY_LAYER34;
+ } else {
+ printf("\t Invalid xmit policy selection");
+ return;
+ }
+
+ /* Set the bonding mode for the relevant port. */
+ if (0 != rte_eth_bond_xmit_policy_set(port_id, policy)) {
+ printf("\t Failed to set bonding balance xmit policy for port = %d.\n",
+ port_id);
+ }
+}
+
+cmdline_parse_token_string_t cmd_setbonding_balance_xmit_policy_set =
+TOKEN_STRING_INITIALIZER(struct cmd_set_bonding_balance_xmit_policy_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_setbonding_balance_xmit_policy_bonding =
+TOKEN_STRING_INITIALIZER(struct cmd_set_bonding_balance_xmit_policy_result,
+ bonding, "bonding");
+cmdline_parse_token_string_t cmd_setbonding_balance_xmit_policy_balance_xmit_policy =
+TOKEN_STRING_INITIALIZER(struct cmd_set_bonding_balance_xmit_policy_result,
+ balance_xmit_policy, "balance_xmit_policy");
+cmdline_parse_token_num_t cmd_setbonding_balance_xmit_policy_port =
+TOKEN_NUM_INITIALIZER(struct cmd_set_bonding_balance_xmit_policy_result,
+ port_id, UINT8);
+cmdline_parse_token_string_t cmd_setbonding_balance_xmit_policy_policy =
+TOKEN_STRING_INITIALIZER(struct cmd_set_bonding_balance_xmit_policy_result,
+ policy, "l2#l23#l34");
+
+cmdline_parse_inst_t cmd_set_balance_xmit_policy = {
+ .f = cmd_set_bonding_balance_xmit_policy_parsed,
+ .help_str = "set bonding balance_xmit_policy (port_id) (policy_value): Set the bonding balance_xmit_policy for port_id",
+ .data = NULL,
+ .tokens = {
+ (void *)&cmd_setbonding_balance_xmit_policy_set,
+ (void *)&cmd_setbonding_balance_xmit_policy_bonding,
+ (void *)&cmd_setbonding_balance_xmit_policy_balance_xmit_policy,
+ (void *)&cmd_setbonding_balance_xmit_policy_port,
+ (void *)&cmd_setbonding_balance_xmit_policy_policy,
+ NULL
+ }
+};
+
+/* *** SHOW NIC BONDING CONFIGURATION *** */
+struct cmd_show_bonding_config_result {
+ cmdline_fixed_string_t show;
+ cmdline_fixed_string_t bonding;
+ cmdline_fixed_string_t config;
+ uint8_t port_id;
+};
+
+static void cmd_show_bonding_config_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_show_bonding_config_result *res = parsed_result;
+ int bonding_mode;
+ uint8_t slaves[RTE_MAX_ETHPORTS];
+ int num_slaves, num_active_slaves;
+ int primary_id;
+ int i;
+ portid_t port_id = res->port_id;
+
+ /* Display the bonding mode.*/
+ bonding_mode = rte_eth_bond_mode_get(port_id);
+ if (bonding_mode < 0) {
+ printf("\tFailed to get bonding mode for port = %d\n", port_id);
+ return;
+ } else
+ printf("\tBonding mode: %d\n", bonding_mode);
+
+ if (bonding_mode == BONDING_MODE_BALANCE) {
+ int balance_xmit_policy;
+
+ balance_xmit_policy = rte_eth_bond_xmit_policy_get(port_id);
+ if (balance_xmit_policy < 0) {
+ printf("\tFailed to get balance xmit policy for port = %d\n",
+ port_id);
+ return;
+ } else {
+ printf("\tBalance Xmit Policy: ");
+
+ switch (balance_xmit_policy) {
+ case BALANCE_XMIT_POLICY_LAYER2:
+ printf("BALANCE_XMIT_POLICY_LAYER2");
+ break;
+ case BALANCE_XMIT_POLICY_LAYER23:
+ printf("BALANCE_XMIT_POLICY_LAYER23");
+ break;
+ case BALANCE_XMIT_POLICY_LAYER34:
+ printf("BALANCE_XMIT_POLICY_LAYER34");
+ break;
+ }
+ printf("\n");
+ }
+ }
+
+ num_slaves = rte_eth_bond_slaves_get(port_id, slaves, RTE_MAX_ETHPORTS);
+
+ if (num_slaves < 0) {
+ printf("\tFailed to get slave list for port = %d\n", port_id);
+ return;
+ }
+ if (num_slaves > 0) {
+ printf("\tSlaves (%d): [", num_slaves);
+ for (i = 0; i < num_slaves - 1; i++)
+ printf("%d ", slaves[i]);
+
+ printf("%d]\n", slaves[num_slaves - 1]);
+ } else {
+ printf("\tSlaves: []\n");
+
+ }
+
+ num_active_slaves = rte_eth_bond_active_slaves_get(port_id, slaves,
+ RTE_MAX_ETHPORTS);
+
+ if (num_active_slaves < 0) {
+ printf("\tFailed to get active slave list for port = %d\n", port_id);
+ return;
+ }
+ if (num_active_slaves > 0) {
+ printf("\tActive Slaves (%d): [", num_active_slaves);
+ for (i = 0; i < num_active_slaves - 1; i++)
+ printf("%d ", slaves[i]);
+
+ printf("%d]\n", slaves[num_active_slaves - 1]);
+
+ } else {
+ printf("\tActive Slaves: []\n");
+
+ }
+
+ primary_id = rte_eth_bond_primary_get(port_id);
+ if (primary_id < 0) {
+ printf("\tFailed to get primary slave for port = %d\n", port_id);
+ return;
+ } else
+ printf("\tPrimary: [%d]\n", primary_id);
+
+}
+
+cmdline_parse_token_string_t cmd_showbonding_config_show =
+TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_config_result,
+ show, "show");
+cmdline_parse_token_string_t cmd_showbonding_config_bonding =
+TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_config_result,
+ bonding, "bonding");
+cmdline_parse_token_string_t cmd_showbonding_config_config =
+TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_config_result,
+ config, "config");
+cmdline_parse_token_num_t cmd_showbonding_config_port =
+TOKEN_NUM_INITIALIZER(struct cmd_show_bonding_config_result,
+ port_id, UINT8);
+
+cmdline_parse_inst_t cmd_show_bonding_config = {
+ .f = cmd_show_bonding_config_parsed,
+ .help_str = "show bonding config (port_id): Show the bonding config for port_id",
+ .data = NULL,
+ .tokens = {
+ (void *)&cmd_showbonding_config_show,
+ (void *)&cmd_showbonding_config_bonding,
+ (void *)&cmd_showbonding_config_config,
+ (void *)&cmd_showbonding_config_port,
+ NULL
+ }
+};
+
+/* *** SET BONDING PRIMARY *** */
+struct cmd_set_bonding_primary_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t bonding;
+ cmdline_fixed_string_t primary;
+ uint8_t slave_id;
+ uint8_t port_id;
+};
+
+static void cmd_set_bonding_primary_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_set_bonding_primary_result *res = parsed_result;
+ portid_t master_port_id = res->port_id;
+ portid_t slave_port_id = res->slave_id;
+
+ /* Set the primary slave for a bonded device. */
+ if (0 != rte_eth_bond_primary_set(master_port_id, slave_port_id)) {
+ printf("\t Failed to set primary slave for port = %d.\n",
+ master_port_id);
+ return;
+ }
+ init_port_config();
+}
+
+cmdline_parse_token_string_t cmd_setbonding_primary_set =
+TOKEN_STRING_INITIALIZER(struct cmd_set_bonding_primary_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_setbonding_primary_bonding =
+TOKEN_STRING_INITIALIZER(struct cmd_set_bonding_primary_result,
+ bonding, "bonding");
+cmdline_parse_token_string_t cmd_setbonding_primary_primary =
+TOKEN_STRING_INITIALIZER(struct cmd_set_bonding_primary_result,
+ primary, "primary");
+cmdline_parse_token_num_t cmd_setbonding_primary_slave =
+TOKEN_NUM_INITIALIZER(struct cmd_set_bonding_primary_result,
+ slave_id, UINT8);
+cmdline_parse_token_num_t cmd_setbonding_primary_port =
+TOKEN_NUM_INITIALIZER(struct cmd_set_bonding_primary_result,
+ port_id, UINT8);
+
+cmdline_parse_inst_t cmd_set_bonding_primary = {
+ .f = cmd_set_bonding_primary_parsed,
+ .help_str = "set bonding primary (slave_id) (port_id): Set the primary slave for port_id",
+ .data = NULL,
+ .tokens = {
+ (void *)&cmd_setbonding_primary_set,
+ (void *)&cmd_setbonding_primary_bonding,
+ (void *)&cmd_setbonding_primary_primary,
+ (void *)&cmd_setbonding_primary_slave,
+ (void *)&cmd_setbonding_primary_port,
+ NULL
+ }
+};
+
+/* *** ADD SLAVE *** */
+struct cmd_add_bonding_slave_result {
+ cmdline_fixed_string_t add;
+ cmdline_fixed_string_t bonding;
+ cmdline_fixed_string_t slave;
+ uint8_t slave_id;
+ uint8_t port_id;
+};
+
+static void cmd_add_bonding_slave_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_add_bonding_slave_result *res = parsed_result;
+ portid_t master_port_id = res->port_id;
+ portid_t slave_port_id = res->slave_id;
+
+ /* Set the primary slave for a bonded device. */
+ if (0 != rte_eth_bond_slave_add(master_port_id, slave_port_id)) {
+ printf("\t Failed to add slave %d to master port = %d.\n",
+ slave_port_id, master_port_id);
+ return;
+ }
+ init_port_config();
+}
+
+cmdline_parse_token_string_t cmd_addbonding_slave_add =
+TOKEN_STRING_INITIALIZER(struct cmd_add_bonding_slave_result,
+ add, "add");
+cmdline_parse_token_string_t cmd_addbonding_slave_bonding =
+TOKEN_STRING_INITIALIZER(struct cmd_add_bonding_slave_result,
+ bonding, "bonding");
+cmdline_parse_token_string_t cmd_addbonding_slave_slave =
+TOKEN_STRING_INITIALIZER(struct cmd_add_bonding_slave_result,
+ slave, "slave");
+cmdline_parse_token_num_t cmd_addbonding_slave_slaveid =
+TOKEN_NUM_INITIALIZER(struct cmd_add_bonding_slave_result,
+ slave_id, UINT8);
+cmdline_parse_token_num_t cmd_addbonding_slave_port =
+TOKEN_NUM_INITIALIZER(struct cmd_add_bonding_slave_result,
+ port_id, UINT8);
+
+cmdline_parse_inst_t cmd_add_bonding_slave = {
+ .f = cmd_add_bonding_slave_parsed,
+ .help_str = "add bonding slave (slave_id) (port_id): Add a slave device to a bonded device",
+ .data = NULL,
+ .tokens = {
+ (void *)&cmd_addbonding_slave_add,
+ (void *)&cmd_addbonding_slave_bonding,
+ (void *)&cmd_addbonding_slave_slave,
+ (void *)&cmd_addbonding_slave_slaveid,
+ (void *)&cmd_addbonding_slave_port,
+ NULL
+ }
+};
+
+/* *** REMOVE SLAVE *** */
+struct cmd_remove_bonding_slave_result {
+ cmdline_fixed_string_t remove;
+ cmdline_fixed_string_t bonding;
+ cmdline_fixed_string_t slave;
+ uint8_t slave_id;
+ uint8_t port_id;
+};
+
+static void cmd_remove_bonding_slave_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_remove_bonding_slave_result *res = parsed_result;
+ portid_t master_port_id = res->port_id;
+ portid_t slave_port_id = res->slave_id;
+
+ /* Set the primary slave for a bonded device. */
+ if (0 != rte_eth_bond_slave_remove(master_port_id, slave_port_id)) {
+ printf("\t Failed to remove slave %d from master port = %d.\n",
+ slave_port_id, master_port_id);
+ return;
+ }
+ init_port_config();
+}
+
+cmdline_parse_token_string_t cmd_removebonding_slave_remove =
+ TOKEN_STRING_INITIALIZER(struct cmd_remove_bonding_slave_result,
+ remove, "remove");
+cmdline_parse_token_string_t cmd_removebonding_slave_bonding =
+ TOKEN_STRING_INITIALIZER(struct cmd_remove_bonding_slave_result,
+ bonding, "bonding");
+cmdline_parse_token_string_t cmd_removebonding_slave_slave =
+ TOKEN_STRING_INITIALIZER(struct cmd_remove_bonding_slave_result,
+ slave, "slave");
+cmdline_parse_token_num_t cmd_removebonding_slave_slaveid =
+ TOKEN_NUM_INITIALIZER(struct cmd_remove_bonding_slave_result,
+ slave_id, UINT8);
+cmdline_parse_token_num_t cmd_removebonding_slave_port =
+ TOKEN_NUM_INITIALIZER(struct cmd_remove_bonding_slave_result,
+ port_id, UINT8);
+
+cmdline_parse_inst_t cmd_remove_bonding_slave = {
+ .f = cmd_remove_bonding_slave_parsed,
+ .help_str = "remove bonding slave (slave_id) (port_id): Remove a slave device from a bonded device",
+ .data = NULL,
+ .tokens = {
+ (void *)&cmd_removebonding_slave_remove,
+ (void *)&cmd_removebonding_slave_bonding,
+ (void *)&cmd_removebonding_slave_slave,
+ (void *)&cmd_removebonding_slave_slaveid,
+ (void *)&cmd_removebonding_slave_port,
+ NULL
+ }
+};
+
+/* *** CREATE BONDED DEVICE *** */
+struct cmd_create_bonded_device_result {
+ cmdline_fixed_string_t create;
+ cmdline_fixed_string_t bonded;
+ cmdline_fixed_string_t device;
+ uint8_t mode;
+ uint8_t socket;
+};
+
+static int bond_dev_num = 0;
+
+static void cmd_create_bonded_device_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_create_bonded_device_result *res = parsed_result;
+ char ethdev_name[RTE_ETH_NAME_MAX_LEN];
+ int port_id;
+
+ if (test_done == 0) {
+ printf("Please stop forwarding first\n");
+ return;
+ }
+
+ snprintf(ethdev_name, RTE_ETH_NAME_MAX_LEN, "eth_bond_testpmd_%d",
+ bond_dev_num++);
+
+ /* Create a new bonded device. */
+ port_id = rte_eth_bond_create(ethdev_name, res->mode, res->socket);
+ if (port_id < 0) {
+ printf("\t Failed to create bonded device.\n");
+ return;
+ } else {
+ printf("Created new bonded device %s on (port %d).\n", ethdev_name,
+ port_id);
+
+ /* Update number of ports */
+ nb_ports = rte_eth_dev_count();
+ reconfig(port_id);
+ rte_eth_promiscuous_enable(port_id);
+ }
+
+}
+
+cmdline_parse_token_string_t cmd_createbonded_device_create =
+ TOKEN_STRING_INITIALIZER(struct cmd_create_bonded_device_result,
+ create, "create");
+cmdline_parse_token_string_t cmd_createbonded_device_bonded =
+ TOKEN_STRING_INITIALIZER(struct cmd_create_bonded_device_result,
+ bonded, "bonded");
+cmdline_parse_token_string_t cmd_createbonded_device_device =
+ TOKEN_STRING_INITIALIZER(struct cmd_create_bonded_device_result,
+ device, "device");
+cmdline_parse_token_num_t cmd_createbonded_device_mode =
+ TOKEN_NUM_INITIALIZER(struct cmd_create_bonded_device_result,
+ mode, UINT8);
+cmdline_parse_token_num_t cmd_createbonded_device_socket =
+ TOKEN_NUM_INITIALIZER(struct cmd_create_bonded_device_result,
+ socket, UINT8);
+
+cmdline_parse_inst_t cmd_create_bonded_device = {
+ .f = cmd_create_bonded_device_parsed,
+ .help_str = "create bonded device (mode) (socket): Create a new bonded device with specific bonding mode and socket",
+ .data = NULL,
+ .tokens = {
+ (void *)&cmd_createbonded_device_create,
+ (void *)&cmd_createbonded_device_bonded,
+ (void *)&cmd_createbonded_device_device,
+ (void *)&cmd_createbonded_device_mode,
+ (void *)&cmd_createbonded_device_socket,
+ NULL
+ }
+};
+
+/* *** SET MAC ADDRESS IN BONDED DEVICE *** */
+struct cmd_set_bond_mac_addr_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t bonding;
+ cmdline_fixed_string_t mac_addr;
+ uint8_t port_num;
+ struct ether_addr address;
+};
+
+static void cmd_set_bond_mac_addr_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_set_bond_mac_addr_result *res = parsed_result;
+ int ret;
+
+ if (res->port_num >= nb_ports) {
+ printf("Port id %d must be less than %d\n", res->port_num, nb_ports);
+ return;
+ }
+
+ ret = rte_eth_bond_mac_address_set(res->port_num, &res->address);
+
+ /* check the return value and print it if is < 0 */
+ if (ret < 0)
+ printf("set_bond_mac_addr error: (%s)\n", strerror(-ret));
+}
+
+cmdline_parse_token_string_t cmd_set_bond_mac_addr_set =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_bond_mac_addr_result, set, "set");
+cmdline_parse_token_string_t cmd_set_bond_mac_addr_bonding =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_bond_mac_addr_result, bonding,
+ "bonding");
+cmdline_parse_token_string_t cmd_set_bond_mac_addr_mac =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_bond_mac_addr_result, mac_addr,
+ "mac_addr");
+cmdline_parse_token_num_t cmd_set_bond_mac_addr_portnum =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_bond_mac_addr_result, port_num, UINT8);
+cmdline_parse_token_etheraddr_t cmd_set_bond_mac_addr_addr =
+ TOKEN_ETHERADDR_INITIALIZER(struct cmd_set_bond_mac_addr_result, address);
+
+cmdline_parse_inst_t cmd_set_bond_mac_addr = {
+ .f = cmd_set_bond_mac_addr_parsed,
+ .data = (void *) 0,
+ .help_str = "set bonding mac_addr (port_id) (address): ",
+ .tokens = {
+ (void *)&cmd_set_bond_mac_addr_set,
+ (void *)&cmd_set_bond_mac_addr_bonding,
+ (void *)&cmd_set_bond_mac_addr_mac,
+ (void *)&cmd_set_bond_mac_addr_portnum,
+ (void *)&cmd_set_bond_mac_addr_addr,
+ NULL
+ }
+};
+
+#endif /* RTE_LIBRTE_PMD_BOND */
+
/* *** SET FORWARDING MODE *** */
struct cmd_set_fwd_mode_result {
cmdline_fixed_string_t set;
cmdline_fixed_string_t mac_ctrl_frame_fwd_mode;
cmdline_fixed_string_t autoneg_str;
cmdline_fixed_string_t autoneg;
+ cmdline_fixed_string_t hw_str;
uint32_t high_water;
+ cmdline_fixed_string_t lw_str;
uint32_t low_water;
+ cmdline_fixed_string_t pt_str;
uint16_t pause_time;
+ cmdline_fixed_string_t xon_str;
uint16_t send_xon;
uint8_t port_id;
};
-static void
-cmd_link_flow_ctrl_set_parsed(void *parsed_result,
- __attribute__((unused)) struct cmdline *cl,
- __attribute__((unused)) void *data)
-{
- struct cmd_link_flow_ctrl_set_result *res = parsed_result;
- struct rte_eth_fc_conf fc_conf;
- int rx_fc_enable, tx_fc_enable, mac_ctrl_frame_fwd;
- int ret;
-
- /*
- * Rx on/off, flow control is enabled/disabled on RX side. This can indicate
- * the RTE_FC_TX_PAUSE, Transmit pause frame at the Rx side.
- * Tx on/off, flow control is enabled/disabled on TX side. This can indicate
- * the RTE_FC_RX_PAUSE, Respond to the pause frame at the Tx side.
- */
- static enum rte_eth_fc_mode rx_tx_onoff_2_lfc_mode[2][2] = {
- {RTE_FC_NONE, RTE_FC_TX_PAUSE}, {RTE_FC_RX_PAUSE, RTE_FC_FULL}
- };
-
- rx_fc_enable = (!strcmp(res->rx_lfc_mode, "on")) ? 1 : 0;
- tx_fc_enable = (!strcmp(res->tx_lfc_mode, "on")) ? 1 : 0;
- mac_ctrl_frame_fwd = (!strcmp(res->mac_ctrl_frame_fwd_mode, "on")) ? 1 : 0;
-
- fc_conf.mode = rx_tx_onoff_2_lfc_mode[rx_fc_enable][tx_fc_enable];
- fc_conf.high_water = res->high_water;
- fc_conf.low_water = res->low_water;
- fc_conf.pause_time = res->pause_time;
- fc_conf.send_xon = res->send_xon;
- fc_conf.mac_ctrl_frame_fwd = (uint8_t)mac_ctrl_frame_fwd;
- fc_conf.autoneg = (!strcmp(res->autoneg, "on")) ? 1 : 0;
-
- ret = rte_eth_dev_flow_ctrl_set(res->port_id, &fc_conf);
- if (ret != 0)
- printf("bad flow contrl parameter, return code = %d \n", ret);
-}
-
cmdline_parse_token_string_t cmd_lfc_set_set =
TOKEN_STRING_INITIALIZER(struct cmd_link_flow_ctrl_set_result,
set, "set");
cmdline_parse_token_string_t cmd_lfc_set_tx_mode =
TOKEN_STRING_INITIALIZER(struct cmd_link_flow_ctrl_set_result,
tx_lfc_mode, "on#off");
+cmdline_parse_token_string_t cmd_lfc_set_high_water_str =
+ TOKEN_STRING_INITIALIZER(struct cmd_link_flow_ctrl_set_result,
+ hw_str, "high_water");
cmdline_parse_token_num_t cmd_lfc_set_high_water =
TOKEN_NUM_INITIALIZER(struct cmd_link_flow_ctrl_set_result,
high_water, UINT32);
+cmdline_parse_token_string_t cmd_lfc_set_low_water_str =
+ TOKEN_STRING_INITIALIZER(struct cmd_link_flow_ctrl_set_result,
+ lw_str, "low_water");
cmdline_parse_token_num_t cmd_lfc_set_low_water =
TOKEN_NUM_INITIALIZER(struct cmd_link_flow_ctrl_set_result,
low_water, UINT32);
+cmdline_parse_token_string_t cmd_lfc_set_pause_time_str =
+ TOKEN_STRING_INITIALIZER(struct cmd_link_flow_ctrl_set_result,
+ pt_str, "pause_time");
cmdline_parse_token_num_t cmd_lfc_set_pause_time =
TOKEN_NUM_INITIALIZER(struct cmd_link_flow_ctrl_set_result,
pause_time, UINT16);
+cmdline_parse_token_string_t cmd_lfc_set_send_xon_str =
+ TOKEN_STRING_INITIALIZER(struct cmd_link_flow_ctrl_set_result,
+ xon_str, "send_xon");
cmdline_parse_token_num_t cmd_lfc_set_send_xon =
TOKEN_NUM_INITIALIZER(struct cmd_link_flow_ctrl_set_result,
send_xon, UINT16);
TOKEN_NUM_INITIALIZER(struct cmd_link_flow_ctrl_set_result,
port_id, UINT8);
+/* forward declaration */
+static void
+cmd_link_flow_ctrl_set_parsed(void *parsed_result, struct cmdline *cl,
+ void *data);
+
cmdline_parse_inst_t cmd_link_flow_control_set = {
.f = cmd_link_flow_ctrl_set_parsed,
.data = NULL,
},
};
+cmdline_parse_inst_t cmd_link_flow_control_set_rx = {
+ .f = cmd_link_flow_ctrl_set_parsed,
+ .data = (void *)&cmd_link_flow_control_set_rx,
+ .help_str = "Change rx flow control parameter: set flow_ctrl "
+ "rx on|off port_id",
+ .tokens = {
+ (void *)&cmd_lfc_set_set,
+ (void *)&cmd_lfc_set_flow_ctrl,
+ (void *)&cmd_lfc_set_rx,
+ (void *)&cmd_lfc_set_rx_mode,
+ (void *)&cmd_lfc_set_portid,
+ NULL,
+ },
+};
+
+cmdline_parse_inst_t cmd_link_flow_control_set_tx = {
+ .f = cmd_link_flow_ctrl_set_parsed,
+ .data = (void *)&cmd_link_flow_control_set_tx,
+ .help_str = "Change tx flow control parameter: set flow_ctrl "
+ "tx on|off port_id",
+ .tokens = {
+ (void *)&cmd_lfc_set_set,
+ (void *)&cmd_lfc_set_flow_ctrl,
+ (void *)&cmd_lfc_set_tx,
+ (void *)&cmd_lfc_set_tx_mode,
+ (void *)&cmd_lfc_set_portid,
+ NULL,
+ },
+};
+
+cmdline_parse_inst_t cmd_link_flow_control_set_hw = {
+ .f = cmd_link_flow_ctrl_set_parsed,
+ .data = (void *)&cmd_link_flow_control_set_hw,
+ .help_str = "Change high water flow control parameter: set flow_ctrl "
+ "high_water value port_id",
+ .tokens = {
+ (void *)&cmd_lfc_set_set,
+ (void *)&cmd_lfc_set_flow_ctrl,
+ (void *)&cmd_lfc_set_high_water_str,
+ (void *)&cmd_lfc_set_high_water,
+ (void *)&cmd_lfc_set_portid,
+ NULL,
+ },
+};
+
+cmdline_parse_inst_t cmd_link_flow_control_set_lw = {
+ .f = cmd_link_flow_ctrl_set_parsed,
+ .data = (void *)&cmd_link_flow_control_set_lw,
+ .help_str = "Change low water flow control parameter: set flow_ctrl "
+ "low_water value port_id",
+ .tokens = {
+ (void *)&cmd_lfc_set_set,
+ (void *)&cmd_lfc_set_flow_ctrl,
+ (void *)&cmd_lfc_set_low_water_str,
+ (void *)&cmd_lfc_set_low_water,
+ (void *)&cmd_lfc_set_portid,
+ NULL,
+ },
+};
+
+cmdline_parse_inst_t cmd_link_flow_control_set_pt = {
+ .f = cmd_link_flow_ctrl_set_parsed,
+ .data = (void *)&cmd_link_flow_control_set_pt,
+ .help_str = "Change pause time flow control parameter: set flow_ctrl "
+ "pause_time value port_id",
+ .tokens = {
+ (void *)&cmd_lfc_set_set,
+ (void *)&cmd_lfc_set_flow_ctrl,
+ (void *)&cmd_lfc_set_pause_time_str,
+ (void *)&cmd_lfc_set_pause_time,
+ (void *)&cmd_lfc_set_portid,
+ NULL,
+ },
+};
+
+cmdline_parse_inst_t cmd_link_flow_control_set_xon = {
+ .f = cmd_link_flow_ctrl_set_parsed,
+ .data = (void *)&cmd_link_flow_control_set_xon,
+ .help_str = "Change send_xon flow control parameter: set flow_ctrl "
+ "send_xon value port_id",
+ .tokens = {
+ (void *)&cmd_lfc_set_set,
+ (void *)&cmd_lfc_set_flow_ctrl,
+ (void *)&cmd_lfc_set_send_xon_str,
+ (void *)&cmd_lfc_set_send_xon,
+ (void *)&cmd_lfc_set_portid,
+ NULL,
+ },
+};
+
+cmdline_parse_inst_t cmd_link_flow_control_set_macfwd = {
+ .f = cmd_link_flow_ctrl_set_parsed,
+ .data = (void *)&cmd_link_flow_control_set_macfwd,
+ .help_str = "Change mac ctrl fwd flow control parameter: set flow_ctrl "
+ "mac_ctrl_frame_fwd on|off port_id",
+ .tokens = {
+ (void *)&cmd_lfc_set_set,
+ (void *)&cmd_lfc_set_flow_ctrl,
+ (void *)&cmd_lfc_set_mac_ctrl_frame_fwd_mode,
+ (void *)&cmd_lfc_set_mac_ctrl_frame_fwd,
+ (void *)&cmd_lfc_set_portid,
+ NULL,
+ },
+};
+
+cmdline_parse_inst_t cmd_link_flow_control_set_autoneg = {
+ .f = cmd_link_flow_ctrl_set_parsed,
+ .data = (void *)&cmd_link_flow_control_set_autoneg,
+ .help_str = "Change autoneg flow control parameter: set flow_ctrl "
+ "autoneg on|off port_id",
+ .tokens = {
+ (void *)&cmd_lfc_set_set,
+ (void *)&cmd_lfc_set_flow_ctrl,
+ (void *)&cmd_lfc_set_autoneg_str,
+ (void *)&cmd_lfc_set_autoneg,
+ (void *)&cmd_lfc_set_portid,
+ NULL,
+ },
+};
+
+static void
+cmd_link_flow_ctrl_set_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ void *data)
+{
+ struct cmd_link_flow_ctrl_set_result *res = parsed_result;
+ cmdline_parse_inst_t *cmd = data;
+ struct rte_eth_fc_conf fc_conf;
+ int rx_fc_en, tx_fc_en;
+ int ret;
+
+ /*
+ * Rx on/off, flow control is enabled/disabled on RX side. This can indicate
+ * the RTE_FC_TX_PAUSE, Transmit pause frame at the Rx side.
+ * Tx on/off, flow control is enabled/disabled on TX side. This can indicate
+ * the RTE_FC_RX_PAUSE, Respond to the pause frame at the Tx side.
+ */
+ static enum rte_eth_fc_mode rx_tx_onoff_2_lfc_mode[2][2] = {
+ {RTE_FC_NONE, RTE_FC_TX_PAUSE}, {RTE_FC_RX_PAUSE, RTE_FC_FULL}
+ };
+
+ /* Partial command line, retrieve current configuration */
+ if (cmd) {
+ ret = rte_eth_dev_flow_ctrl_get(res->port_id, &fc_conf);
+ if (ret != 0) {
+ printf("cannot get current flow ctrl parameters, return"
+ "code = %d\n", ret);
+ return;
+ }
+
+ if ((fc_conf.mode == RTE_FC_RX_PAUSE) ||
+ (fc_conf.mode == RTE_FC_FULL))
+ rx_fc_en = 1;
+ if ((fc_conf.mode == RTE_FC_TX_PAUSE) ||
+ (fc_conf.mode == RTE_FC_FULL))
+ tx_fc_en = 1;
+ }
+
+ if (!cmd || cmd == &cmd_link_flow_control_set_rx)
+ rx_fc_en = (!strcmp(res->rx_lfc_mode, "on")) ? 1 : 0;
+
+ if (!cmd || cmd == &cmd_link_flow_control_set_tx)
+ tx_fc_en = (!strcmp(res->tx_lfc_mode, "on")) ? 1 : 0;
+
+ fc_conf.mode = rx_tx_onoff_2_lfc_mode[rx_fc_en][tx_fc_en];
+
+ if (!cmd || cmd == &cmd_link_flow_control_set_hw)
+ fc_conf.high_water = res->high_water;
+
+ if (!cmd || cmd == &cmd_link_flow_control_set_lw)
+ fc_conf.low_water = res->low_water;
+
+ if (!cmd || cmd == &cmd_link_flow_control_set_pt)
+ fc_conf.pause_time = res->pause_time;
+
+ if (!cmd || cmd == &cmd_link_flow_control_set_xon)
+ fc_conf.send_xon = res->send_xon;
+
+ if (!cmd || cmd == &cmd_link_flow_control_set_macfwd) {
+ if (!strcmp(res->mac_ctrl_frame_fwd_mode, "on"))
+ fc_conf.mac_ctrl_frame_fwd = 1;
+ else
+ fc_conf.mac_ctrl_frame_fwd = 0;
+ }
+
+ if (!cmd || cmd == &cmd_link_flow_control_set_autoneg)
+ fc_conf.autoneg = (!strcmp(res->autoneg, "on")) ? 1 : 0;
+
+ ret = rte_eth_dev_flow_ctrl_set(res->port_id, &fc_conf);
+ if (ret != 0)
+ printf("bad flow contrl parameter, return code = %d \n", ret);
+}
+
/* *** SETUP ETHERNET PIRORITY FLOW CONTROL *** */
struct cmd_priority_flow_ctrl_set_result {
cmdline_fixed_string_t set;
if (!strcmp(res->what, "stats"))
for (i = 0; i < nb_ports; i++)
nic_stats_clear(i);
+ else if (!strcmp(res->what, "xstats"))
+ for (i = 0; i < nb_ports; i++)
+ nic_xstats_clear(i);
} else if (!strcmp(res->what, "info"))
for (i = 0; i < nb_ports; i++)
port_infos_display(i);
else if (!strcmp(res->what, "stats"))
for (i = 0; i < nb_ports; i++)
nic_stats_display(i);
+ else if (!strcmp(res->what, "xstats"))
+ for (i = 0; i < nb_ports; i++)
+ nic_xstats_display(i);
else if (!strcmp(res->what, "fdir"))
for (i = 0; i < nb_ports; i++)
fdir_get_infos(i);
TOKEN_STRING_INITIALIZER(struct cmd_showportall_result, port, "port");
cmdline_parse_token_string_t cmd_showportall_what =
TOKEN_STRING_INITIALIZER(struct cmd_showportall_result, what,
- "info#stats#fdir#stat_qmap");
+ "info#stats#xstats#fdir#stat_qmap");
cmdline_parse_token_string_t cmd_showportall_all =
TOKEN_STRING_INITIALIZER(struct cmd_showportall_result, all, "all");
cmdline_parse_inst_t cmd_showportall = {
.f = cmd_showportall_parsed,
.data = NULL,
- .help_str = "show|clear port info|stats|fdir|stat_qmap all",
+ .help_str = "show|clear port info|stats|xstats|fdir|stat_qmap all",
.tokens = {
(void *)&cmd_showportall_show,
(void *)&cmd_showportall_port,
if (!strcmp(res->show, "clear")) {
if (!strcmp(res->what, "stats"))
nic_stats_clear(res->portnum);
+ else if (!strcmp(res->what, "xstats"))
+ nic_xstats_clear(res->portnum);
} else if (!strcmp(res->what, "info"))
port_infos_display(res->portnum);
else if (!strcmp(res->what, "stats"))
nic_stats_display(res->portnum);
+ else if (!strcmp(res->what, "xstats"))
+ nic_xstats_display(res->portnum);
else if (!strcmp(res->what, "fdir"))
fdir_get_infos(res->portnum);
else if (!strcmp(res->what, "stat_qmap"))
TOKEN_STRING_INITIALIZER(struct cmd_showport_result, port, "port");
cmdline_parse_token_string_t cmd_showport_what =
TOKEN_STRING_INITIALIZER(struct cmd_showport_result, what,
- "info#stats#fdir#stat_qmap");
+ "info#stats#xstats#fdir#stat_qmap");
cmdline_parse_token_num_t cmd_showport_portnum =
TOKEN_NUM_INITIALIZER(struct cmd_showport_result, portnum, INT32);
cmdline_parse_inst_t cmd_showport = {
.f = cmd_showport_parsed,
.data = NULL,
- .help_str = "show|clear port info|stats|fdir|stat_qmap X (X = port number)",
+ .help_str = "show|clear port info|stats|xstats|fdir|stat_qmap X (X = port number)",
.tokens = {
(void *)&cmd_showport_show,
(void *)&cmd_showport_port,
{
#define DUMP_SIZE(t) printf("sizeof(" #t ") = %u\n", (unsigned)sizeof(t));
DUMP_SIZE(struct rte_mbuf);
- DUMP_SIZE(struct rte_pktmbuf);
- DUMP_SIZE(struct rte_ctrlmbuf);
DUMP_SIZE(struct rte_mempool);
DUMP_SIZE(struct rte_ring);
#undef DUMP_SIZE
(cmdline_parse_inst_t *)&cmd_set_bypass_event,
(cmdline_parse_inst_t *)&cmd_set_bypass_timeout,
(cmdline_parse_inst_t *)&cmd_show_bypass_config,
+#endif
+#ifdef RTE_LIBRTE_PMD_BOND
+ (cmdline_parse_inst_t *) &cmd_set_bonding_mode,
+ (cmdline_parse_inst_t *) &cmd_show_bonding_config,
+ (cmdline_parse_inst_t *) &cmd_set_bonding_primary,
+ (cmdline_parse_inst_t *) &cmd_add_bonding_slave,
+ (cmdline_parse_inst_t *) &cmd_remove_bonding_slave,
+ (cmdline_parse_inst_t *) &cmd_create_bonded_device,
+ (cmdline_parse_inst_t *) &cmd_set_bond_mac_addr,
+ (cmdline_parse_inst_t *) &cmd_set_balance_xmit_policy,
#endif
(cmdline_parse_inst_t *)&cmd_vlan_offload,
(cmdline_parse_inst_t *)&cmd_vlan_tpid,
(cmdline_parse_inst_t *)&cmd_tx_vlan_set_pvid,
(cmdline_parse_inst_t *)&cmd_tx_cksum_set,
(cmdline_parse_inst_t *)&cmd_link_flow_control_set,
+ (cmdline_parse_inst_t *)&cmd_link_flow_control_set_rx,
+ (cmdline_parse_inst_t *)&cmd_link_flow_control_set_tx,
+ (cmdline_parse_inst_t *)&cmd_link_flow_control_set_hw,
+ (cmdline_parse_inst_t *)&cmd_link_flow_control_set_lw,
+ (cmdline_parse_inst_t *)&cmd_link_flow_control_set_pt,
+ (cmdline_parse_inst_t *)&cmd_link_flow_control_set_xon,
+ (cmdline_parse_inst_t *)&cmd_link_flow_control_set_macfwd,
+ (cmdline_parse_inst_t *)&cmd_link_flow_control_set_autoneg,
(cmdline_parse_inst_t *)&cmd_priority_flow_control_set,
(cmdline_parse_inst_t *)&cmd_config_dcb,
(cmdline_parse_inst_t *)&cmd_read_reg,
(cmdline_parse_inst_t *)&cmd_config_max_pkt_len,
(cmdline_parse_inst_t *)&cmd_config_rx_mode_flag,
(cmdline_parse_inst_t *)&cmd_config_rss,
+ (cmdline_parse_inst_t *)&cmd_config_rxtx_queue,
(cmdline_parse_inst_t *)&cmd_config_rss_reta,
(cmdline_parse_inst_t *)&cmd_showport_reta,
(cmdline_parse_inst_t *)&cmd_config_burst,