#include <time.h>
#include <fcntl.h>
#include <sys/types.h>
-#include <errno.h>
#include <sys/queue.h>
#include <sys/stat.h>
printf("usage: %s "
#ifdef RTE_LIBRTE_CMDLINE
"[--interactive|-i] "
+ "[--cmdline-file=FILENAME] "
#endif
"[--help|-h] | [--auto-start|-a] | ["
+ "--tx-first | --stats-period=PERIOD | "
"--coremask=COREMASK --portmask=PORTMASK --numa "
"--mbuf-size= | --total-num-mbufs= | "
"--nb-cores= | --nb-ports= | "
progname);
#ifdef RTE_LIBRTE_CMDLINE
printf(" --interactive: run in interactive mode.\n");
+ printf(" --cmdline-file: execute cli commands before startup.\n");
#endif
printf(" --auto-start: start forwarding on init "
"[always when non-interactive].\n");
printf(" --help: display this message and quit.\n");
+ printf(" --tx-first: start forwarding sending a burst first "
+ "(only if interactive is disabled).\n");
+ printf(" --stats-period=PERIOD: statistics will be shown "
+ "every PERIOD seconds (only if interactive is disabled).\n");
printf(" --nb-cores=N: set the number of forwarding cores "
"(1 <= N <= %d).\n", nb_lcores);
printf(" --nb-ports=N: set the number of forwarding ports "
printf(" --disable-link-check: disable check on link status when "
"starting/stopping ports.\n");
printf(" --no-lsc-interrupt: disable link status change interrupt.\n");
- printf(" --no-rmv-interrupt: disable device removal interrupt.");
+ printf(" --no-rmv-interrupt: disable device removal interrupt.\n");
+ printf(" --bitrate-stats=N: set the logical core N to perform "
+ "bit-rate calculation.\n");
+ printf(" --print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|all>: "
+ "enable print of designated event or all of them.");
+ printf(" --mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|all>: "
+ "disable print of designated event or all of them.");
+ printf(" --flow-isolate-all: "
+ "requests flow API isolated mode on all ports at initialization time.");
}
#ifdef RTE_LIBRTE_CMDLINE
return 0;
}
+static void
+print_invalid_socket_id_error(void)
+{
+ unsigned int i = 0;
+
+ printf("Invalid socket id, options are: ");
+ for (i = 0; i < num_sockets; i++) {
+ printf("%u%s", socket_ids[i],
+ (i == num_sockets - 1) ? "\n" : ",");
+ }
+}
+
static int
parse_portnuma_config(const char *q_arg)
{
return -1;
}
socket_id = (uint8_t)int_fld[FLD_SOCKET];
- if(socket_id >= max_socket) {
- printf("Invalid socket id, range is [0, %d]\n",
- max_socket - 1);
+ if (new_socket_id(socket_id)) {
+ print_invalid_socket_id_error();
return -1;
}
port_numa[port_id] = socket_id;
return -1;
}
socket_id = (uint8_t)int_fld[FLD_SOCKET];
- if (socket_id >= max_socket) {
- printf("Invalid socket id, range is [0, %d]\n",
- max_socket - 1);
+ if (new_socket_id(socket_id)) {
+ print_invalid_socket_id_error();
return -1;
}
ring_flag = (uint8_t)int_fld[FLD_FLAG];
return 0;
}
+static int
+parse_event_printing_config(const char *optarg, int enable)
+{
+ uint32_t mask = 0;
+
+ if (!strcmp(optarg, "unknown"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN;
+ else if (!strcmp(optarg, "intr_lsc"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC;
+ else if (!strcmp(optarg, "queue_state"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE;
+ else if (!strcmp(optarg, "intr_reset"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET;
+ else if (!strcmp(optarg, "vf_mbox"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_VF_MBOX;
+ else if (!strcmp(optarg, "macsec"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_MACSEC;
+ else if (!strcmp(optarg, "intr_rmv"))
+ mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV;
+ else if (!strcmp(optarg, "all"))
+ mask = ~UINT32_C(0);
+ else {
+ fprintf(stderr, "Invalid event: %s\n", optarg);
+ return -1;
+ }
+ if (enable)
+ event_print_mask |= mask;
+ else
+ event_print_mask &= ~mask;
+ return 0;
+}
+
void
launch_args_parse(int argc, char** argv)
{
{ "help", 0, 0, 0 },
#ifdef RTE_LIBRTE_CMDLINE
{ "interactive", 0, 0, 0 },
+ { "cmdline-file", 1, 0, 0 },
{ "auto-start", 0, 0, 0 },
{ "eth-peers-configfile", 1, 0, 0 },
{ "eth-peer", 1, 0, 0 },
#endif
+ { "tx-first", 0, 0, 0 },
+ { "stats-period", 1, 0, 0 },
{ "ports", 1, 0, 0 },
{ "nb-cores", 1, 0, 0 },
{ "nb-ports", 1, 0, 0 },
{ "coremask", 1, 0, 0 },
{ "portmask", 1, 0, 0 },
{ "numa", 0, 0, 0 },
+ { "no-numa", 0, 0, 0 },
{ "mp-anon", 0, 0, 0 },
{ "port-numa-config", 1, 0, 0 },
{ "ring-numa-config", 1, 0, 0 },
{ "pkt-filter-drop-queue", 1, 0, 0 },
#ifdef RTE_LIBRTE_LATENCY_STATS
{ "latencystats", 1, 0, 0 },
+#endif
+#ifdef RTE_LIBRTE_BITRATE
+ { "bitrate-stats", 1, 0, 0 },
#endif
{ "disable-crc-strip", 0, 0, 0 },
{ "enable-lro", 0, 0, 0 },
{ "tx-queue-stats-mapping", 1, 0, 0 },
{ "rx-queue-stats-mapping", 1, 0, 0 },
{ "no-flush-rx", 0, 0, 0 },
+ { "flow-isolate-all", 0, 0, 0 },
{ "txpkts", 1, 0, 0 },
{ "disable-link-check", 0, 0, 0 },
{ "no-lsc-interrupt", 0, 0, 0 },
{ "no-rmv-interrupt", 0, 0, 0 },
+ { "print-event", 1, 0, 0 },
+ { "mask-event", 1, 0, 0 },
{ 0, 0, 0, 0 },
};
printf("Interactive-mode selected\n");
interactive = 1;
}
+ if (!strcmp(lgopts[opt_idx].name, "cmdline-file")) {
+ printf("CLI commands to be read from %s\n",
+ optarg);
+ snprintf(cmdline_filename,
+ sizeof(cmdline_filename), "%s",
+ optarg);
+ }
if (!strcmp(lgopts[opt_idx].name, "auto-start")) {
printf("Auto-start selected\n");
auto_start = 1;
}
+ if (!strcmp(lgopts[opt_idx].name, "tx-first")) {
+ printf("Ports to start sending a burst of "
+ "packets first\n");
+ tx_first = 1;
+ }
+ if (!strcmp(lgopts[opt_idx].name, "stats-period")) {
+ char *end = NULL;
+ unsigned int n;
+
+ n = strtoul(optarg, &end, 10);
+ if ((optarg[0] == '\0') || (end == NULL) ||
+ (*end != '\0'))
+ break;
+
+ stats_period = n;
+ break;
+ }
if (!strcmp(lgopts[opt_idx].name,
"eth-peers-configfile")) {
if (init_peer_eth_addrs(optarg) != 0)
parse_fwd_coremask(optarg);
if (!strcmp(lgopts[opt_idx].name, "portmask"))
parse_fwd_portmask(optarg);
- if (!strcmp(lgopts[opt_idx].name, "numa")) {
+ if (!strcmp(lgopts[opt_idx].name, "no-numa"))
+ numa_support = 0;
+ if (!strcmp(lgopts[opt_idx].name, "numa"))
numa_support = 1;
- memset(port_numa,NUMA_NO_CONFIG,RTE_MAX_ETHPORTS);
- memset(rxring_numa,NUMA_NO_CONFIG,RTE_MAX_ETHPORTS);
- memset(txring_numa,NUMA_NO_CONFIG,RTE_MAX_ETHPORTS);
- }
if (!strcmp(lgopts[opt_idx].name, "mp-anon")) {
mp_anon = 1;
}
"invalid ring-numa configuration\n");
if (!strcmp(lgopts[opt_idx].name, "socket-num")) {
n = atoi(optarg);
- if((uint8_t)n < max_socket)
+ if (!new_socket_id((uint8_t)n)) {
socket_num = (uint8_t)n;
- else
+ } else {
+ print_invalid_socket_id_error();
rte_exit(EXIT_FAILURE,
- "The socket number should be < %d\n",
- max_socket);
+ "Invalid socket id");
+ }
}
if (!strcmp(lgopts[opt_idx].name, "mbuf-size")) {
n = atoi(optarg);
"invalid lcore id %d for latencystats"
" must be >= 0\n", n);
}
+#endif
+#ifdef RTE_LIBRTE_BITRATE
+ if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) {
+ n = atoi(optarg);
+ if (n >= 0) {
+ bitrate_lcore_id = (lcoreid_t) n;
+ bitrate_enabled = 1;
+ } else
+ rte_exit(EXIT_FAILURE,
+ "invalid lcore id %d for bitrate stats"
+ " must be >= 0\n", n);
+ }
#endif
if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip"))
rx_mode.hw_strip_crc = 0;
lsc_interrupt = 0;
if (!strcmp(lgopts[opt_idx].name, "no-rmv-interrupt"))
rmv_interrupt = 0;
+ if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
+ flow_isolate_all = 1;
+ if (!strcmp(lgopts[opt_idx].name, "print-event"))
+ if (parse_event_printing_config(optarg, 1)) {
+ rte_exit(EXIT_FAILURE,
+ "invalid print-event argument\n");
+ }
+ if (!strcmp(lgopts[opt_idx].name, "mask-event"))
+ if (parse_event_printing_config(optarg, 0)) {
+ rte_exit(EXIT_FAILURE,
+ "invalid mask-event argument\n");
+ }
break;
case 'h':