#include <rte_cycles.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
-#include <rte_memzone.h>
#include <rte_launch.h>
#include <rte_eal.h>
#include <rte_alarm.h>
#include "testpmd.h"
uint16_t verbose_level = 0; /**< Silent by default. */
+int testpmd_logtype; /**< Log type for testpmd logs */
/* use master core for command line ? */
uint8_t interactive = 0;
&tx_only_engine,
&csum_fwd_engine,
&icmp_echo_engine,
+#if defined RTE_LIBRTE_PMD_SOFTNIC && defined RTE_LIBRTE_SCHED
+ &softnic_tm_engine,
+ &softnic_tm_bypass_engine,
+#endif
#ifdef RTE_LIBRTE_IEEE1588
&ieee1588_fwd_engine,
#endif
.hw_vlan_extend = 0, /**< Extended VLAN disabled. */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled. */
.hw_strip_crc = 1, /**< CRC stripping by hardware enabled. */
+ .hw_timestamp = 0, /**< HW timestamp enabled. */
};
struct rte_fdir_conf fdir_conf = {
uint16_t nb_tx_queue_stats_mappings = 0;
uint16_t nb_rx_queue_stats_mappings = 0;
+/*
+ * Display zero values by default for xstats
+ */
+uint8_t xstats_hide_zero;
+
unsigned int num_sockets = 0;
unsigned int socket_ids[RTE_MAX_NUMA_NODES];
uint8_t gro_flush_cycles = GRO_DEFAULT_FLUSH_CYCLES;
/* Forward function declarations */
-static void map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port);
+static void map_port_queue_stats_mapping_registers(portid_t pi,
+ struct rte_port *port);
static void check_all_ports_link_status(uint32_t port_mask);
static int eth_event_callback(portid_t port_id,
enum rte_eth_event_type type,
mb_size = sizeof(struct rte_mbuf) + mbuf_seg_size;
mbuf_poolname_build(socket_id, pool_name, sizeof(pool_name));
- RTE_LOG(INFO, USER1,
+ TESTPMD_LOG(INFO,
"create a new mbuf pool <%s>: n=%u, size=%u, socket=%u\n",
pool_name, nb_mbuf, mbuf_seg_size, socket_id);
void
dev_set_link_up(portid_t pid)
{
- if (rte_eth_dev_set_link_up((uint8_t)pid) < 0)
+ if (rte_eth_dev_set_link_up(pid) < 0)
printf("\nSet link up fail.\n");
}
void
dev_set_link_down(portid_t pid)
{
- if (rte_eth_dev_set_link_down((uint8_t)pid) < 0)
+ if (rte_eth_dev_set_link_down(pid) < 0)
printf("\nSet link down fail.\n");
}
}
void
-detach_port(uint8_t port_id)
+detach_port(portid_t port_id)
{
char name[RTE_ETH_NAME_MAX_LEN];
port_flow_flush(port_id);
if (rte_eth_dev_detach(port_id, name)) {
- RTE_LOG(ERR, USER1, "Failed to detach port '%s'\n", name);
+ TESTPMD_LOG(ERR, "Failed to detach port '%s'\n", name);
return;
}
rmv_event_callback(void *arg)
{
struct rte_eth_dev *dev;
- uint8_t port_id = (intptr_t)arg;
+ portid_t port_id = (intptr_t)arg;
RTE_ETH_VALID_PORTID_OR_RET(port_id);
dev = &rte_eth_devices[port_id];
close_port(port_id);
printf("removing device %s\n", dev->device->name);
if (rte_eal_dev_detach(dev->device))
- RTE_LOG(ERR, USER1, "Failed to detach device %s\n",
+ TESTPMD_LOG(ERR, "Failed to detach device %s\n",
dev->device->name);
}
}
static int
-set_tx_queue_stats_mapping_registers(uint8_t port_id, struct rte_port *port)
+set_tx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port)
{
uint16_t i;
int diag;
}
static int
-set_rx_queue_stats_mapping_registers(uint8_t port_id, struct rte_port *port)
+set_rx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port)
{
uint16_t i;
int diag;
}
static void
-map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port)
+map_port_queue_stats_mapping_registers(portid_t pi, struct rte_port *port)
{
int diag = 0;
(rte_eth_devices[pid].data->dev_flags &
RTE_ETH_DEV_INTR_RMV))
port->dev_conf.intr_conf.rmv = 1;
+
+#if defined RTE_LIBRTE_PMD_SOFTNIC && defined RTE_LIBRTE_SCHED
+ /* Detect softnic port */
+ if (!strcmp(port->dev_info.driver_name, "net_softnic")) {
+ port->softnic_enable = 1;
+ memset(&port->softport, 0, sizeof(struct softnic_port));
+
+ if (!strcmp(cur_fwd_eng->fwd_mode_name, "tm"))
+ port->softport.tm_flag = 1;
+ }
+#endif
}
}
1 << (i % vmdq_rx_conf->nb_queue_pools);
}
for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
- vmdq_rx_conf->dcb_tc[i] = i;
- vmdq_tx_conf->dcb_tc[i] = i;
+ vmdq_rx_conf->dcb_tc[i] = i % num_tcs;
+ vmdq_tx_conf->dcb_tc[i] = i % num_tcs;
}
/* set DCB mode of RX and TX of multiple queues */
if (diag < 0)
rte_panic("Cannot init EAL\n");
+ testpmd_logtype = rte_log_register("testpmd");
+ if (testpmd_logtype < 0)
+ rte_panic("Cannot register log type");
+ rte_log_set_level(testpmd_logtype, RTE_LOG_DEBUG);
+
if (mlockall(MCL_CURRENT | MCL_FUTURE)) {
- RTE_LOG(NOTICE, USER1, "mlockall() failed with error \"%s\"\n",
+ TESTPMD_LOG(NOTICE, "mlockall() failed with error \"%s\"\n",
strerror(errno));
}
nb_ports = (portid_t) rte_eth_dev_count();
if (nb_ports == 0)
- RTE_LOG(WARNING, EAL, "No probed ethernet devices\n");
+ TESTPMD_LOG(WARNING, "No probed ethernet devices\n");
/* allocate port structures, and init them */
init_port();