#! /bin/sh -e
-
-# BSD LICENSE
-#
+# SPDX-License-Identifier: BSD-3-Clause
# Copyright 2015 6WIND S.A.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of 6WIND S.A. nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
default_path=$PATH
# Load config options:
# - ARMV8_CRYPTO_LIB_PATH
# - DPDK_BUILD_TEST_CONFIGS (defconfig1+option1+option2 defconfig2)
+# - DPDK_BUILD_TEST_DIR
# - DPDK_DEP_ARCHIVE
+# - DPDK_DEP_BPF (y/[n])
# - DPDK_DEP_CFLAGS
+# - DPDK_DEP_ELF (y/[n])
+# - DPDK_DEP_ISAL (y/[n])
+# - DPDK_DEP_JSON (y/[n])
# - DPDK_DEP_LDFLAGS
# - DPDK_DEP_MLX (y/[n])
+# - DPDK_DEP_NFB (y/[n])
# - DPDK_DEP_NUMA ([y]/n)
# - DPDK_DEP_PCAP (y/[n])
# - DPDK_DEP_SSL (y/[n])
# - LIBSSO_SNOW3G_PATH
# - LIBSSO_KASUMI_PATH
# - LIBSSO_ZUC_PATH
-. $(dirname $(readlink -e $0))/load-devel-config
+. $(dirname $(readlink -f $0))/load-devel-config
print_usage () {
echo "usage: $(basename $0) [-h] [-jX] [-s] [config1 [config2] ...]]"
-v verbose build
config: defconfig[[~][+]option1[[~][+]option2...]]
- Example: x86_64-native-linuxapp-gcc+debug~RXTX_CALLBACKS
+ Example: x86_64-native-linux-gcc+debug~RXTX_CALLBACKS
The lowercase options are defined inside $(basename $0).
The uppercase options can be the end of a defconfig option
to enable if prefixed with '+' or to disable if prefixed with '~'.
END_OF_HELP
}
+[ -z $MAKE ] && command -v gmake > /dev/null && MAKE=gmake
+[ -z $MAKE ] && command -v make > /dev/null && MAKE=make
+[ -z $MAKE ] && echo "Cannot find make or gmake" && exit 1
+
J=$DPDK_MAKE_JOBS
+builds_dir=${DPDK_BUILD_TEST_DIR:-.}
short=false
unset verbose
maxerr=-Wfatal-errors
# notify result on exit
trap on_exit EXIT
-cd $(dirname $(readlink -m $0))/..
+cd $(dirname $(readlink -f $0))/..
reset_env ()
{
export PATH=$default_path
unset CROSS
unset DPDK_DEP_ARCHIVE
+ unset DPDK_DEP_BPF
unset DPDK_DEP_CFLAGS
+ unset DPDK_DEP_ELF
+ unset DPDK_DEP_ISAL
+ unset DPDK_DEP_JSON
unset DPDK_DEP_LDFLAGS
unset DPDK_DEP_MLX
+ unset DPDK_DEP_NFB
unset DPDK_DEP_NUMA
unset DPDK_DEP_PCAP
unset DPDK_DEP_SSL
fi
if [ ! -e $1/.config ] || $reconfig ; then
echo "================== Configure $1"
- make T=$2 O=$1 config
+ ${MAKE} T=$2 O=$1 config
echo 'Customize configuration'
# Built-in options (lowercase)
! echo $3 | grep -q '+default' || \
- sed -ri 's,(RTE_MACHINE=")native,\1default,' $1/.config
+ sed -ri="" 's,(RTE_MACHINE=")native,\1default,' $1/.config
echo $3 | grep -q '+next' || \
- sed -ri 's,(NEXT_ABI=)y,\1n,' $1/.config
+ sed -ri="" 's,(NEXT_ABI=)y,\1n,' $1/.config
! echo $3 | grep -q '+shared' || \
- sed -ri 's,(SHARED_LIB=)n,\1y,' $1/.config
+ sed -ri="" 's,(SHARED_LIB=)n,\1y,' $1/.config
! echo $3 | grep -q '+debug' || ( \
- sed -ri 's,(RTE_LOG_DP_LEVEL=).*,\1RTE_LOG_DEBUG,' $1/.config
- sed -ri 's,(_DEBUG.*=)n,\1y,' $1/.config
- sed -ri 's,(_STAT.*=)n,\1y,' $1/.config
- sed -ri 's,(TEST_PMD_RECORD_.*=)n,\1y,' $1/.config )
+ sed -ri="" 's,(RTE_LOG_DP_LEVEL=).*,\1RTE_LOG_DEBUG,' $1/.config
+ sed -ri="" 's,(_DEBUG.*=)n,\1y,' $1/.config
+ sed -ri="" 's,(_STAT.*=)n,\1y,' $1/.config
+ sed -ri="" 's,(TEST_PMD_RECORD_.*=)n,\1y,' $1/.config )
# Automatic configuration
test "$DPDK_DEP_NUMA" != n || \
- sed -ri 's,(NUMA.*=)y,\1n,' $1/.config
- sed -ri 's,(LIBRTE_IEEE1588=)n,\1y,' $1/.config
- sed -ri 's,(BYPASS=)n,\1y,' $1/.config
+ sed -ri="" 's,(NUMA.*=)y,\1n,' $1/.config
+ sed -ri="" 's,(LIBRTE_IEEE1588=)n,\1y,' $1/.config
+ sed -ri="" 's,(BYPASS=)n,\1y,' $1/.config
test "$DPDK_DEP_ARCHIVE" != y || \
- sed -ri 's,(RESOURCE_TAR=)n,\1y,' $1/.config
+ sed -ri="" 's,(RESOURCE_TAR=)n,\1y,' $1/.config
+ test "$DPDK_DEP_BPF" != y || \
+ sed -ri="" 's,(PMD_AF_XDP=)n,\1y,' $1/.config
+ test "$DPDK_DEP_ISAL" != y || \
+ sed -ri="" 's,(PMD_ISAL=)n,\1y,' $1/.config
test "$DPDK_DEP_MLX" != y || \
- sed -ri 's,(MLX._PMD=)n,\1y,' $1/.config
+ sed -ri="" 's,(MLX._PMD=)n,\1y,' $1/.config
+ test "$DPDK_DEP_NFB" != y || \
+ sed -ri="" 's,(NFB_PMD=)n,\1y,' $1/.config
test "$DPDK_DEP_SZE" != y || \
- sed -ri 's,(PMD_SZEDATA2=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_SZEDATA2=)n,\1y,' $1/.config
+ test "$DPDK_DEP_ZLIB" != y || \
+ sed -ri="" 's,(BNX2X_PMD=)n,\1y,' $1/.config
test "$DPDK_DEP_ZLIB" != y || \
- sed -ri 's,(BNX2X_PMD=)n,\1y,' $1/.config
- sed -ri 's,(NFP_PMD=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_ZLIB=)n,\1y,' $1/.config
+ test "$DPDK_DEP_ZLIB" != y || \
+ sed -ri="" 's,(COMPRESSDEV_TEST=)n,\1y,' $1/.config
test "$DPDK_DEP_PCAP" != y || \
- sed -ri 's,(PCAP=)n,\1y,' $1/.config
+ sed -ri="" 's,(PCAP=)n,\1y,' $1/.config
test -z "$ARMV8_CRYPTO_LIB_PATH" || \
- sed -ri 's,(PMD_ARMV8_CRYPTO=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_ARMV8_CRYPTO=)n,\1y,' $1/.config
test "$DPDK_DEP_IPSEC_MB" != y || \
- sed -ri 's,(PMD_AESNI_MB=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_AESNI_MB=)n,\1y,' $1/.config
test "$DPDK_DEP_IPSEC_MB" != y || \
- sed -ri 's,(PMD_AESNI_GCM=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_AESNI_GCM=)n,\1y,' $1/.config
test -z "$LIBSSO_SNOW3G_PATH" || \
- sed -ri 's,(PMD_SNOW3G=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_SNOW3G=)n,\1y,' $1/.config
test -z "$LIBSSO_KASUMI_PATH" || \
- sed -ri 's,(PMD_KASUMI=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_KASUMI=)n,\1y,' $1/.config
test -z "$LIBSSO_ZUC_PATH" || \
- sed -ri 's,(PMD_ZUC=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_ZUC=)n,\1y,' $1/.config
test "$DPDK_DEP_SSL" != y || \
- sed -ri 's,(PMD_CCP=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_CCP=)n,\1y,' $1/.config
test "$DPDK_DEP_SSL" != y || \
- sed -ri 's,(PMD_OPENSSL=)n,\1y,' $1/.config
+ sed -ri="" 's,(PMD_OPENSSL=)n,\1y,' $1/.config
test "$DPDK_DEP_SSL" != y || \
- sed -ri 's,(PMD_QAT=)n,\1y,' $1/.config
+ sed -ri="" 's,(QAT_SYM=)n,\1y,' $1/.config
test -z "$FLEXRAN_SDK" || \
- sed -ri 's,(BBDEV_TURBO_SW=)n,\1y,' $1/.config
- sed -ri 's,(SCHED_.*=)n,\1y,' $1/.config
+ sed -ri="" 's,(BBDEV_TURBO_SW=)n,\1y,' $1/.config
+ sed -ri="" 's,(SCHED_.*=)n,\1y,' $1/.config
+ test -z "$LIBMUSDK_PATH" || \
+ sed -ri="" 's,(PMD_MVSAM_CRYPTO=)n,\1y,' $1/.config
test -z "$LIBMUSDK_PATH" || \
- sed -ri 's,(PMD_MVSAM_CRYPTO=)n,\1y,' $1/.config
+ sed -ri="" 's,(MVPP2_PMD=)n,\1y,' $1/.config
test -z "$LIBMUSDK_PATH" || \
- sed -ri 's,(MVPP2_PMD=)n,\1y,' $1/.config
+ sed -ri="" 's,(MVNETA_PMD=)n,\1y,' $1/.config
+ test "$DPDK_DEP_ELF" != y || \
+ sed -ri="" 's,(BPF_ELF=)n,\1y,' $1/.config
+ test "$DPDK_DEP_JSON" != y || \
+ sed -ri="" 's,(TELEMETRY=)n,\1y,' $1/.config
build_config_hook $1 $2 $3
# Explicit enabler/disabler (uppercase)
for option in $(echo $3 | sed 's,[~+], &,g') ; do
pattern=$(echo $option | cut -c2-)
if echo $option | grep -q '^~' ; then
- sed -ri "s,($pattern=)y,\1n," $1/.config
+ sed -ri="" "s,($pattern=)y,\1n," $1/.config
elif echo $option | grep -q '^+' ; then
- sed -ri "s,($pattern=)n,\1y," $1/.config
+ sed -ri="" "s,($pattern=)n,\1y," $1/.config
fi
done
fi
# reload config with DPDK_TARGET set
DPDK_TARGET=$target
reset_env
- . $(dirname $(readlink -e $0))/load-devel-config
+ . $(dirname $(readlink -f $0))/load-devel-config
options=$(echo $conf | sed 's,[^~+]*,,')
- dir=$conf
+ dir=$builds_dir/$conf
config $dir $target $options
- echo "================== Build $dir"
- make -j$J EXTRA_CFLAGS="$maxerr $DPDK_DEP_CFLAGS" \
+ echo "================== Build $conf"
+ ${MAKE} -j$J EXTRA_CFLAGS="$maxerr $DPDK_DEP_CFLAGS" \
EXTRA_LDFLAGS="$DPDK_DEP_LDFLAGS" $verbose O=$dir
! $short || break
- echo "================== Build tests for $dir"
- make test-build -j$J EXTRA_CFLAGS="$maxerr $DPDK_DEP_CFLAGS" \
- EXTRA_LDFLAGS="$DPDK_DEP_LDFLAGS" $verbose O=$dir
- echo "================== Build examples for $dir"
- export RTE_SDK=$(pwd)
- export RTE_TARGET=$dir
- make -j$J -sC examples \
+ export RTE_TARGET=$target
+ rm -rf $dir/install
+ ${MAKE} install O=$dir DESTDIR=$dir/install prefix=
+ echo "================== Build examples for $conf"
+ export RTE_SDK=$(readlink -f $dir)/install/share/dpdk
+ ln -sTf $(pwd)/lib $RTE_SDK/lib # workaround for vm_power_manager
+ ${MAKE} -j$J -sC examples \
EXTRA_LDFLAGS="$DPDK_DEP_LDFLAGS" $verbose \
- O=$(readlink -m $dir/examples)
+ O=$(readlink -f $dir)/examples
unset RTE_TARGET
- echo "################## $dir done."
+ echo "################## $conf done."
unset dir
done
if ! $short ; then
mkdir -p .check
echo "================== Build doxygen HTML API"
- make doc-api-html >/dev/null 2>.check/doc.txt
+ ${MAKE} doc-api-html >/dev/null 2>.check/doc.txt
echo "================== Build sphinx HTML guides"
- make doc-guides-html >/dev/null 2>>.check/doc.txt
+ ${MAKE} doc-guides-html >/dev/null 2>>.check/doc.txt
echo "================== Check docs"
diff -u /dev/null .check/doc.txt
fi